From 57efea87db43ba0dbb2a9b2987d5f41637c965c1 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Wed, 6 Nov 2019 17:58:31 +0100 Subject: drm/mcde: dsi: Make video mode errors more verbose Triggering an error conditions in DSI video mode only results in a very generic "some video mode error status" error message at the moment. Make this more clear by adding separate error messages for each bit. Signed-off-by: Stephan Gerhold Tested-by: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-4-stephan@gerhold.net --- drivers/gpu/drm/mcde/mcde_dsi.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm/mcde/mcde_dsi.c') diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c index ffd2e0b64628..c7956c92b51b 100644 --- a/drivers/gpu/drm/mcde/mcde_dsi.c +++ b/drivers/gpu/drm/mcde/mcde_dsi.c @@ -124,7 +124,27 @@ bool mcde_dsi_irq(struct mipi_dsi_device *mdsi) val = readl(d->regs + DSI_VID_MODE_STS_FLAG); if (val) - dev_err(d->dev, "some video mode error status\n"); + dev_dbg(d->dev, "DSI_VID_MODE_STS_FLAG = %08x\n", val); + if (val & DSI_VID_MODE_STS_VSG_RUNNING) + dev_dbg(d->dev, "VID mode VSG running\n"); + if (val & DSI_VID_MODE_STS_ERR_MISSING_DATA) + dev_err(d->dev, "VID mode missing data\n"); + if (val & DSI_VID_MODE_STS_ERR_MISSING_HSYNC) + dev_err(d->dev, "VID mode missing HSYNC\n"); + if (val & DSI_VID_MODE_STS_ERR_MISSING_VSYNC) + dev_err(d->dev, "VID mode missing VSYNC\n"); + if (val & DSI_VID_MODE_STS_REG_ERR_SMALL_LENGTH) + dev_err(d->dev, "VID mode less bytes than expected between two HSYNC\n"); + if (val & DSI_VID_MODE_STS_REG_ERR_SMALL_HEIGHT) + dev_err(d->dev, "VID mode less lines than expected between two VSYNC\n"); + if (val & (DSI_VID_MODE_STS_ERR_BURSTWRITE | + DSI_VID_MODE_STS_ERR_LINEWRITE | + DSI_VID_MODE_STS_ERR_LONGREAD)) + dev_err(d->dev, "VID mode read/write error\n"); + if (val & DSI_VID_MODE_STS_ERR_VRS_WRONG_LENGTH) + dev_err(d->dev, "VID mode received packets differ from expected size\n"); + if (val & DSI_VID_MODE_STS_VSG_RECOVERY) + dev_err(d->dev, "VID mode VSG in recovery mode\n"); writel(val, d->regs + DSI_VID_MODE_STS_CLR); return te_received; -- cgit v1.2.3