From 2d95e7ed07ed29715a801a3d33b2ad2a6fb26ee3 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 3 Jul 2018 17:19:27 -0400 Subject: media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHY The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by: Sakari Ailus Tested-by: Steve Longerbeam Tested-by: Jacopo Mondi Signed-off-by: Mauro Carvalho Chehab --- drivers/gpu/ipu-v3/ipu-csi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/ipu-v3/ipu-csi.c') diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c index 954eefe144e2..aa0e30a2ba18 100644 --- a/drivers/gpu/ipu-v3/ipu-csi.c +++ b/drivers/gpu/ipu-v3/ipu-csi.c @@ -232,7 +232,7 @@ static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code, case MEDIA_BUS_FMT_BGR565_2X8_LE: case MEDIA_BUS_FMT_RGB565_2X8_BE: case MEDIA_BUS_FMT_RGB565_2X8_LE: - if (mbus_type == V4L2_MBUS_CSI2) + if (mbus_type == V4L2_MBUS_CSI2_DPHY) cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_RGB565; else cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER; @@ -359,7 +359,7 @@ static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg, else csicfg->clk_mode = IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE; break; - case V4L2_MBUS_CSI2: + case V4L2_MBUS_CSI2_DPHY: /* * MIPI CSI-2 requires non gated clock mode, all other * parameters are not applicable for MIPI CSI-2 bus. @@ -611,7 +611,7 @@ int ipu_csi_set_mipi_datatype(struct ipu_csi *csi, u32 vc, if (vc > 3) return -EINVAL; - ret = mbus_code_to_bus_cfg(&cfg, mbus_fmt->code, V4L2_MBUS_CSI2); + ret = mbus_code_to_bus_cfg(&cfg, mbus_fmt->code, V4L2_MBUS_CSI2_DPHY); if (ret < 0) return ret; -- cgit v1.2.3