From 38b2b022363d8c911dba40cf30af46febf4974fe Mon Sep 17 00:00:00 2001 From: Noah Wang Date: Wed, 26 Jun 2024 17:46:01 +0800 Subject: hwmon: add MP2891 driver Add support for MPS VR controller mp2891. This driver exposes telemetry and limit value readings and writtings. Signed-off-by: Noah Wang Link: https://lore.kernel.org/r/SEYPR04MB64828A352836982C0184AA10FAD62@SEYPR04MB6482.apcprd04.prod.outlook.com Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/Kconfig | 9 + drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/mp2891.c | 600 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 610 insertions(+) create mode 100644 drivers/hwmon/pmbus/mp2891.c (limited to 'drivers/hwmon/pmbus') diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 7d32cfc19820..338b2e98dc22 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -337,6 +337,15 @@ config SENSORS_MP2888 This driver can also be built as a module. If so, the module will be called mp2888. +config SENSORS_MP2891 + tristate "MPS MP2891" + help + If you say yes here you get hardware monitoring support for MPS + MP2891 Dual Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2891. + config SENSORS_MP2975 tristate "MPS MP2975" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 6c7177fde355..8afc5ba748f6 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_MP2856) += mp2856.o obj-$(CONFIG_SENSORS_MP2888) += mp2888.o +obj-$(CONFIG_SENSORS_MP2891) += mp2891.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o obj-$(CONFIG_SENSORS_MP2993) += mp2993.o obj-$(CONFIG_SENSORS_MP5023) += mp5023.o diff --git a/drivers/hwmon/pmbus/mp2891.c b/drivers/hwmon/pmbus/mp2891.c new file mode 100644 index 000000000000..bb28b15a9103 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2891.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2891) + */ + +#include +#include +#include +#include +#include "pmbus.h" + +/* + * Vender specific registers, the register MFR_SVI3_IOUT_PRT(0x65), + * MFR_VOUT_LOOP_CTRL(0xBD), READ_PIN_EST(0x94)and READ_IIN_EST(0x95) + * redefine the standard PMBUS register. The MFR_SVI3_IOUT_PRT(0x65) + * is used to identify the iout scale and the MFR_VOUT_LOOP_CTRL(0xBD) + * is used to identify the vout scale. The READ_PIN_EST(0x94) is used + * to read input power per rail. The MP2891 does not have standard + * READ_IIN register(0x89), the iin telemetry can be obtained through + * the vendor redefined register READ_IIN_EST(0x95). + */ +#define MFR_VOUT_LOOP_CTRL 0xBD +#define READ_PIN_EST 0x94 +#define READ_IIN_EST 0x95 +#define MFR_SVI3_IOUT_PRT 0x65 + +#define MP2891_TEMP_LIMIT_OFFSET 40 +#define MP2891_PIN_LIMIT_UINT 2 +#define MP2891_IOUT_LIMIT_UINT 8 +#define MP2891_IOUT_SCALE_DIV 32 +#define MP2891_VOUT_SCALE_DIV 100 +#define MP2891_OVUV_DELTA_SCALE 50 +#define MP2891_OV_LIMIT_SCALE 20 +#define MP2891_UV_LIMIT_SCALE 5 + +#define MP2891_PAGE_NUM 2 + +#define MP2891_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_INPUT | \ + PMBUS_HAVE_STATUS_TEMP) + +#define MP2891_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_INPUT | \ + PMBUS_HAVE_STATUS_TEMP) + +struct mp2891_data { + struct pmbus_driver_info info; + int vout_scale[MP2891_PAGE_NUM]; + int iout_scale[MP2891_PAGE_NUM]; +}; + +#define to_mp2891_data(x) container_of(x, struct mp2891_data, info) + +/* Converts a LINEAR11 value to DIRECT format */ +static u16 mp2891_reg2data_linear11(u16 word) +{ + s16 exponent; + s32 mantissa; + s64 val; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + val = mantissa; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +static int +mp2891_identify_vout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_VOUT_LOOP_CTRL); + if (ret < 0) + return ret; + + /* + * The output voltage is equal to the READ_VOUT(0x8B) register value multiplied + * by vout_scale. + * Obtain vout scale from the register MFR_VOUT_LOOP_CTRL, bits 15-14,bit 13. + * If MFR_VOUT_LOOP_CTRL[13] = 1, the vout scale is below: + * 2.5mV/LSB + * If MFR_VOUT_LOOP_CTRL[13] = 0, the vout scale is decided by + * MFR_VOUT_LOOP_CTRL[15:14]: + * 00b - 6.25mV/LSB, 01b - 5mV/LSB, 10b - 2mV/LSB, 11b - 1mV + */ + if (ret & GENMASK(13, 13)) { + data->vout_scale[page] = 250; + } else { + ret = FIELD_GET(GENMASK(15, 14), ret); + if (ret == 0) + data->vout_scale[page] = 625; + else if (ret == 1) + data->vout_scale[page] = 500; + else if (ret == 2) + data->vout_scale[page] = 200; + else + data->vout_scale[page] = 100; + } + + return 0; +} + +static int +mp2891_identify_iout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_SVI3_IOUT_PRT); + if (ret < 0) + return ret; + + /* + * The output current is equal to the READ_IOUT(0x8C) register value + * multiplied by iout_scale. + * Obtain iout_scale from the register MFR_SVI3_IOUT_PRT[2:0]. + * The value is selected as below: + * 000b - 1A/LSB, 001b - (1/32)A/LSB, 010b - (1/16)A/LSB, + * 011b - (1/8)A/LSB, 100b - (1/4)A/LSB, 101b - (1/2)A/LSB + * 110b - 1A/LSB, 111b - 2A/LSB + */ + switch (ret & GENMASK(2, 0)) { + case 0: + case 6: + data->iout_scale[page] = 32; + break; + case 1: + data->iout_scale[page] = 1; + break; + case 2: + data->iout_scale[page] = 2; + break; + case 3: + data->iout_scale[page] = 4; + break; + case 4: + data->iout_scale[page] = 8; + break; + case 5: + data->iout_scale[page] = 16; + break; + default: + data->iout_scale[page] = 64; + break; + } + + return 0; +} + +static int mp2891_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + /* Identify vout scale for rail 1. */ + ret = mp2891_identify_vout_scale(client, info, 0); + if (ret < 0) + return ret; + + /* Identify vout scale for rail 2. */ + ret = mp2891_identify_vout_scale(client, info, 1); + if (ret < 0) + return ret; + + /* Identify iout scale for rail 1. */ + ret = mp2891_identify_iout_scale(client, info, 0); + if (ret < 0) + return ret; + + /* Identify iout scale for rail 2. */ + return mp2891_identify_iout_scale(client, info, 1); +} + +static int mp2891_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_MODE: + /* + * The MP2891 does not follow standard PMBus protocol completely, the + * PMBUS_VOUT_MODE(0x20) in MP2891 is reserved and 0x00 is always + * returned when the register is read. But the calculation of vout in + * this driver is based on direct format. As a result, the format of + * vout is enforced to direct. + */ + ret = PB_VOUT_MODE_DIRECT; + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int mp2891_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + switch (reg) { + case PMBUS_READ_VIN: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = ret & GENMASK(9, 0); + break; + case PMBUS_READ_IIN: + /* + * The MP2891 does not have standard PMBUS_READ_IIN register(0x89), + * the iin telemetry can be obtained through the vender redefined + * register READ_IIN_EST(0x95). The MP2891 PMBUS_READ_IIN register + * is linear11 format, But the pout scale is set to 1A/Lsb(using + * r/m/b scale). As a result, the iin read from MP2891 should be + * calculated to A, then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, READ_IIN_EST); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_PIN: + /* + * The MP2891 has standard PMBUS_READ_PIN register(0x97), but this + * is not used to read the input power per rail. The input power + * per rail is read through the vender redefined register + * READ_PIN_EST(0x94). The MP2891 PMBUS_READ_PIN register is linear11 + * format, But the pout scale is set to 1W/Lsb(using r/m/b scale). + * As a result, the pin read from MP2891 should be calculated to W, + * then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, READ_PIN_EST); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_POUT: + /* + * The MP2891 PMBUS_READ_POUT register is linear11 format, and the + * exponent is not a constant value. But the pout scale is set to + * 1W/Lsb(using r/m/b scale). As a result, the pout read from MP2891 + * should be calculated to W, then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_VOUT: + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret * data->vout_scale[page], MP2891_VOUT_SCALE_DIV); + break; + case PMBUS_READ_IOUT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(10, 0)) * data->iout_scale[page], + MP2891_IOUT_SCALE_DIV); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT + * is 1°C/LSB and they have 40°C offset. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(7, 0)) - MP2891_TEMP_LIMIT_OFFSET; + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* + * The MP2891 PMBUS_VIN_OV_FAULT_LIMIT scale is 125mV/Lsb. + * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale). + * As a result, the limit value should be multiplied by 4. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(7, 0)) * 4; + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE - + (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE; + else + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE; + + ret = ret < 0 ? 0 : ret; + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE + + (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE; + else + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE; + break; + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * data->iout_scale[page] * + MP2891_IOUT_LIMIT_UINT, MP2891_IOUT_SCALE_DIV); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale + * is set to 1A/Lsb(using r/m/b scale), so the word data should be + * divided by 2. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)), 2); + break; + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale + * is set to 1W/Lsb(using r/m/b scale), so the word data should be + * multiplied by 2. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(9, 0)) * MP2891_PIN_LIMIT_UINT; + break; + case PMBUS_READ_TEMPERATURE_1: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2891_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + switch (reg) { + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP2891_VOUT_SCALE_DIV, + data->vout_scale[page])); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + /* + * The PMBUS_VOUT_UV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word + + (FIELD_GET(GENMASK(11, 8), ret) + 1) * + MP2891_OVUV_DELTA_SCALE, + MP2891_UV_LIMIT_SCALE))); + else + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, + MP2891_UV_LIMIT_SCALE))); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + /* + * The PMBUS_VOUT_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word - + (FIELD_GET(GENMASK(11, 8), ret) + 1) * + MP2891_OVUV_DELTA_SCALE, + MP2891_OV_LIMIT_SCALE))); + else + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, + MP2891_OV_LIMIT_SCALE))); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* + * The PMBUS_VIN_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. The scale of PMBUS_VIN_OV_FAULT_LIMIT is 125mV/Lsb, + * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale), so the word data + * should be divided by 4. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, 4))); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT + * have 40°C offset. The bit0-bit7 is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), word + MP2891_TEMP_LIMIT_OFFSET)); + break; + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP2891_IOUT_SCALE_DIV, + MP2891_IOUT_LIMIT_UINT * + data->iout_scale[page])); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale + * is set to 1A/Lsb(using r/m/b scale), so the word data should be + * multiplied by 2. + */ + ret = pmbus_write_word_data(client, page, reg, word * 2); + break; + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale + * is set to 1W/Lsb(using r/m/b scale), so the word data should be + * divided by 2. + */ + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word, MP2891_PIN_LIMIT_UINT)); + break; + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static const struct pmbus_driver_info mp2891_info = { + .pages = MP2891_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_CURRENT_IN] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_POWER] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + + /* set vin scale 31.25mV/Lsb */ + .m[PSC_VOLTAGE_IN] = 32, + .R[PSC_VOLTAGE_IN] = 0, + .b[PSC_VOLTAGE_IN] = 0, + + /* set temp scale 1000m°C/Lsb */ + .m[PSC_TEMPERATURE] = 1, + .R[PSC_TEMPERATURE] = 0, + .b[PSC_TEMPERATURE] = 0, + + .m[PSC_CURRENT_IN] = 1, + .R[PSC_CURRENT_IN] = 0, + .b[PSC_CURRENT_IN] = 0, + + .m[PSC_CURRENT_OUT] = 1, + .R[PSC_CURRENT_OUT] = 0, + .b[PSC_CURRENT_OUT] = 0, + + .m[PSC_POWER] = 1, + .R[PSC_POWER] = 0, + .b[PSC_POWER] = 0, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .func[0] = MP2891_RAIL1_FUNC, + .func[1] = MP2891_RAIL2_FUNC, + .read_word_data = mp2891_read_word_data, + .write_word_data = mp2891_write_word_data, + .read_byte_data = mp2891_read_byte_data, + .identify = mp2891_identify, +}; + +static int mp2891_probe(struct i2c_client *client) +{ + struct mp2891_data *data; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + memcpy(&data->info, &mp2891_info, sizeof(mp2891_info)); + + return pmbus_do_probe(client, &data->info); +} + +static const struct i2c_device_id mp2891_id[] = { + {"mp2891", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2891_id); + +static const struct of_device_id __maybe_unused mp2891_of_match[] = { + {.compatible = "mps,mp2891"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2891_of_match); + +static struct i2c_driver mp2891_driver = { + .driver = { + .name = "mp2891", + .of_match_table = mp2891_of_match, + }, + .probe = mp2891_probe, + .id_table = mp2891_id, +}; + +module_i2c_driver(mp2891_driver); + +MODULE_AUTHOR("Noah Wang "); +MODULE_DESCRIPTION("PMBus driver for MPS MP2891"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); -- cgit v1.2.3