From 79622f372b8679916bf4e38aabc6df2659d1e109 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 27 Apr 2020 19:49:12 +0100 Subject: i2c: pxa: move private definitions to i2c-pxa.c Move driver-private definitions out of the i2c-pxa.h platform data header file into the driver itself. Nothing outside of the driver makes use of these constants. Signed-off-by: Russell King Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pxa.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 3286b5f8bf17..9c811a09eac9 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -85,6 +85,49 @@ #define IWCR_HS_CNT2_SHIFT 10 #define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT) +/* need a longer timeout if we're dealing with the fact we may well be + * looking at a multi-master environment + */ +#define DEF_TIMEOUT 32 + +#define BUS_ERROR (-EREMOTEIO) +#define XFER_NAKED (-ECONNREFUSED) +#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ + +/* ICR initialize bit values + * + * 15 FM 0 (100 kHz operation) + * 14 UR 0 (No unit reset) + * 13 SADIE 0 (Disables the unit from interrupting on slave addresses + * matching its slave address) + * 12 ALDIE 0 (Disables the unit from interrupt when it loses arbitration + * in master mode) + * 11 SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) + * 10 BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) + * 9 IRFIE 1 (Enable interrupts from full buffer received) + * 8 ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) + * 7 GCD 1 (Disables i2c unit response to general call messages as a slave) + * 6 IUE 0 (Disable unit until we change settings) + * 5 SCLE 1 (Enables the i2c clock output for master mode (drives SCL) + * 4 MA 0 (Only send stop with the ICR stop bit) + * 3 TB 0 (We are not transmitting a byte initially) + * 2 ACKNAK 0 (Send an ACK after the unit receives a byte) + * 1 STOP 0 (Do not send a STOP) + * 0 START 0 (Do not send a START) + */ +#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) + +/* I2C status register init values + * + * 10 BED 1 (Clear bus error detected) + * 9 SAD 1 (Clear slave address detected) + * 7 IRF 1 (Clear IDBR Receive Full) + * 6 ITE 1 (Clear IDBR Transmit Empty) + * 5 ALD 1 (Clear Arbitration Loss Detected) + * 4 SSD 1 (Clear Slave Stop Detected) + */ +#define I2C_ISR_INIT 0x7FF /* status register init */ + struct pxa_reg_layout { u32 ibmr; u32 idbr; -- cgit v1.2.3