From b7fb14d3ac63117e0e8beabe75f4ea52051fbe3a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 16 Jun 2021 15:46:58 +0200 Subject: ide: remove the legacy ide driver The legay ide driver has been replace with libata starting in 2003 and has been scheduled for removal for a while. Finally kill it off so that we can start cleaning up various bits of cruft it forced on the block layer. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/ide/cs5530.c | 295 --------------------------------------------------- 1 file changed, 295 deletions(-) delete mode 100644 drivers/ide/cs5530.c (limited to 'drivers/ide/cs5530.c') diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c deleted file mode 100644 index 65371599b976..000000000000 --- a/drivers/ide/cs5530.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Copyright (C) 2000 Andre Hedrick - * Copyright (C) 2000 Mark Lord - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz - * - * May be copied or modified under the terms of the GNU General Public License - * - * Development of this chipset driver was funded - * by the nice folks at National Semiconductor. - * - * Documentation: - * CS5530 documentation available from National Semiconductor. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#define DRV_NAME "cs5530" - -/* - * Here are the standard PIO mode 0-4 timings for each "format". - * Format-0 uses fast data reg timings, with slower command reg timings. - * Format-1 uses fast timings for all registers, but won't work with all drives. - */ -static unsigned int cs5530_pio_timings[2][5] = { - {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, - {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} -}; - -/* - * After chip reset, the PIO timings are set to 0x0000e132, which is not valid. - */ -#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132) -#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20)) - -/** - * cs5530_set_pio_mode - set host controller for PIO mode - * @hwif: port - * @drive: drive - * - * Handles setting of PIO mode for the chipset. - * - * The init_hwif_cs5530() routine guarantees that all drives - * will have valid default PIO timings set up before we get here. - */ - -static void cs5530_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - unsigned long basereg = CS5530_BASEREG(hwif); - unsigned int format = (inl(basereg + 4) >> 31) & 1; - const u8 pio = drive->pio_mode - XFER_PIO_0; - - outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); -} - -/** - * cs5530_udma_filter - UDMA filter - * @drive: drive - * - * cs5530_udma_filter() does UDMA mask filtering for the given drive - * taking into the consideration capabilities of the mate device. - * - * The CS5530 specifies that two drives sharing a cable cannot mix - * UDMA/MDMA. It has to be one or the other, for the pair, though - * different timings can still be chosen for each drive. We could - * set the appropriate timing bits on the fly, but that might be - * a bit confusing. So, for now we statically handle this requirement - * by looking at our mate drive to see what it is capable of, before - * choosing a mode for our own drive. - * - * Note: This relies on the fact we never fail from UDMA to MWDMA2 - * but instead drop to PIO. - */ - -static u8 cs5530_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_drive_t *mate = ide_get_pair_dev(drive); - u16 *mateid; - u8 mask = hwif->ultra_mask; - - if (mate == NULL) - goto out; - mateid = mate->id; - - if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) { - if ((mateid[ATA_ID_FIELD_VALID] & 4) && - (mateid[ATA_ID_UDMA_MODES] & 7)) - goto out; - if (mateid[ATA_ID_MWDMA_MODES] & 7) - mask = 0; - } -out: - return mask; -} - -static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - unsigned long basereg; - unsigned int reg, timings = 0; - - switch (drive->dma_mode) { - case XFER_UDMA_0: timings = 0x00921250; break; - case XFER_UDMA_1: timings = 0x00911140; break; - case XFER_UDMA_2: timings = 0x00911030; break; - case XFER_MW_DMA_0: timings = 0x00077771; break; - case XFER_MW_DMA_1: timings = 0x00012121; break; - case XFER_MW_DMA_2: timings = 0x00002020; break; - } - basereg = CS5530_BASEREG(hwif); - reg = inl(basereg + 4); /* get drive0 config register */ - timings |= reg & 0x80000000; /* preserve PIO format bit */ - if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ - outl(timings, basereg + 4); /* write drive0 config register */ - } else { - if (timings & 0x00100000) - reg |= 0x00100000; /* enable UDMA timings for both drives */ - else - reg &= ~0x00100000; /* disable UDMA timings for both drives */ - outl(reg, basereg + 4); /* write drive0 config register */ - outl(timings, basereg + 12); /* write drive1 config register */ - } -} - -/** - * init_chipset_5530 - set up 5530 bridge - * @dev: PCI device - * - * Initialize the cs5530 bridge for reliable IDE DMA operation. - */ - -static int init_chipset_cs5530(struct pci_dev *dev) -{ - struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; - - if (pci_resource_start(dev, 4) == 0) - return -EFAULT; - - dev = NULL; - while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { - switch (dev->device) { - case PCI_DEVICE_ID_CYRIX_PCI_MASTER: - master_0 = pci_dev_get(dev); - break; - case PCI_DEVICE_ID_CYRIX_5530_LEGACY: - cs5530_0 = pci_dev_get(dev); - break; - } - } - if (!master_0) { - printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); - goto out; - } - if (!cs5530_0) { - printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); - goto out; - } - - /* - * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530: - * --> OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530 - */ - - pci_set_master(cs5530_0); - pci_try_set_mwi(cs5530_0); - - /* - * Set PCI CacheLineSize to 16-bytes: - * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530 - */ - - pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04); - - /* - * Disable trapping of UDMA register accesses (Win98 hack): - * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530 - */ - - pci_write_config_word(cs5530_0, 0xd0, 0x5006); - - /* - * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus: - * The other settings are what is necessary to get the register - * into a sane state for IDE DMA operation. - */ - - pci_write_config_byte(master_0, 0x40, 0x1e); - - /* - * Set max PCI burst size (16-bytes seems to work best): - * 16bytes: set bit-1 at 0x41 (reg value of 0x16) - * all others: clear bit-1 at 0x41, and do: - * 128bytes: OR 0x00 at 0x41 - * 256bytes: OR 0x04 at 0x41 - * 512bytes: OR 0x08 at 0x41 - * 1024bytes: OR 0x0c at 0x41 - */ - - pci_write_config_byte(master_0, 0x41, 0x14); - - /* - * These settings are necessary to get the chip - * into a sane state for IDE DMA operation. - */ - - pci_write_config_byte(master_0, 0x42, 0x00); - pci_write_config_byte(master_0, 0x43, 0xc1); - -out: - pci_dev_put(master_0); - pci_dev_put(cs5530_0); - return 0; -} - -/** - * init_hwif_cs5530 - initialise an IDE channel - * @hwif: IDE to initialize - * - * This gets invoked by the IDE driver once for each channel. It - * performs channel-specific pre-initialization before drive probing. - */ - -static void init_hwif_cs5530 (ide_hwif_t *hwif) -{ - unsigned long basereg; - u32 d0_timings; - - basereg = CS5530_BASEREG(hwif); - d0_timings = inl(basereg + 0); - if (CS5530_BAD_PIO(d0_timings)) - outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0); - if (CS5530_BAD_PIO(inl(basereg + 8))) - outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8); -} - -static const struct ide_port_ops cs5530_port_ops = { - .set_pio_mode = cs5530_set_pio_mode, - .set_dma_mode = cs5530_set_dma_mode, - .udma_filter = cs5530_udma_filter, -}; - -static const struct ide_port_info cs5530_chipset = { - .name = DRV_NAME, - .init_chipset = init_chipset_cs5530, - .init_hwif = init_hwif_cs5530, - .port_ops = &cs5530_port_ops, - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_POST_SET_MODE, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA2, -}; - -static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return ide_pci_init_one(dev, &cs5530_chipset, NULL); -} - -static const struct pci_device_id cs5530_pci_tbl[] = { - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl); - -static struct pci_driver cs5530_pci_driver = { - .name = "CS5530 IDE", - .id_table = cs5530_pci_tbl, - .probe = cs5530_init_one, - .remove = ide_pci_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init cs5530_ide_init(void) -{ - return ide_pci_register_driver(&cs5530_pci_driver); -} - -static void __exit cs5530_ide_exit(void) -{ - pci_unregister_driver(&cs5530_pci_driver); -} - -module_init(cs5530_ide_init); -module_exit(cs5530_ide_exit); - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE"); -MODULE_LICENSE("GPL"); -- cgit v1.2.3