From 4db90a145292327b95b03f6dcd3352327235cc36 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:18 +0100 Subject: ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag * Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate(). * Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old, serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode methods in host drivers that don't (IDE core code guarantees that ->set_dma_mode will be called only for modes which are present in SWDMA/MWDMA/UDMA masks). While at it: * Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in hpt34x/hpt366/pdc202xx_old/serverworks host driver. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/it8213.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-) (limited to 'drivers/ide/pci/it8213.c') diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index 90b52ed37bfc..2a0f45c4f4c4 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -101,24 +101,11 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_read_config_byte(dev, 0x54, ®54); pci_read_config_byte(dev, 0x55, ®55); - switch(speed) { - case XFER_UDMA_6: - case XFER_UDMA_4: - case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break; - case XFER_UDMA_5: - case XFER_UDMA_3: - case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break; - case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break; - break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_SW_DMA_2: - break; - default: - return; - } - if (speed >= XFER_UDMA_0) { + u8 udma = speed - XFER_UDMA_0; + + u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4); + if (!(reg48 & u_flag)) pci_write_config_byte(dev, 0x48, reg48 | u_flag); if (speed >= XFER_UDMA_5) { -- cgit v1.2.3