From 75d4c6d2e15d4455dfd5995c27e6e6ad6f214e39 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Wed, 30 Aug 2017 13:50:40 +0200 Subject: iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones Separate data-ready configuration parameters for INT1 and INT2 pins in st_sensor_data_ready_irq data structure. That change will be use to properly support LIS2DW12 accel sensor. Signed-off-by: Lorenzo Bianconi Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/st_gyro_core.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers/iio/gyro') diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 22c0c1732996..46991f7131d1 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -111,8 +111,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .mask = 0x80, }, .drdy_irq = { - .addr = 0x22, - .mask_int2 = 0x08, + .int2 = { + .addr = 0x22, + .mask = 0x08, + }, /* * The sensor has IHL (active low) and open * drain settings, but only for INT1 and not @@ -184,8 +186,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .mask = 0x80, }, .drdy_irq = { - .addr = 0x22, - .mask_int2 = 0x08, + .int2 = { + .addr = 0x22, + .mask = 0x08, + }, /* * The sensor has IHL (active low) and open * drain settings, but only for INT1 and not @@ -252,8 +256,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .mask = 0x80, }, .drdy_irq = { - .addr = 0x22, - .mask_int2 = 0x08, + .int2 = { + .addr = 0x22, + .mask = 0x08, + }, /* * The sensor has IHL (active low) and open * drain settings, but only for INT1 and not -- cgit v1.2.3