From 9a909447d3af6917bf2f7eaae08af0c9e1c3593e Mon Sep 17 00:00:00 2001 From: Hans Werner Date: Wed, 14 Jan 2009 13:17:59 -0300 Subject: V4L/DVB (10392): lnbp21: documentation about the system register Here is a patch which adds some documentation about meanings of the the lnbp21 system register bits. Signed-off-by: Hans Werner Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/lnbp21.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/media/dvb/frontends/lnbp21.h') diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h index 8fe094bd9689..b8745887492c 100644 --- a/drivers/media/dvb/frontends/lnbp21.h +++ b/drivers/media/dvb/frontends/lnbp21.h @@ -28,14 +28,14 @@ #define _LNBP21_H /* system register bits */ -#define LNBP21_OLF 0x01 -#define LNBP21_OTF 0x02 -#define LNBP21_EN 0x04 -#define LNBP21_VSEL 0x08 -#define LNBP21_LLC 0x10 -#define LNBP21_TEN 0x20 -#define LNBP21_ISEL 0x40 -#define LNBP21_PCL 0x80 +#define LNBP21_OLF 0x01 /* [R-only] 0=OK; 1=over current limit flag*/ +#define LNBP21_OTF 0x02 /* [R-only] 0=OK; 1=over temperature flag (150degC typ) */ +#define LNBP21_EN 0x04 /* [RW] 0=disable LNB power, enable loopthrough; 1=enable LNB power, disable loopthrough*/ +#define LNBP21_VSEL 0x08 /* [RW] 0=low voltage (13/14V, vert pol); 1=high voltage (18/19V,horiz pol) */ +#define LNBP21_LLC 0x10 /* [RW] increase LNB voltage by 1V: 0=13/18V; 1=14/19V */ +#define LNBP21_TEN 0x20 /* [RW] 0=tone controlled by DSQIN pin; 1=tone enable, disable DSQIN */ +#define LNBP21_ISEL 0x40 /* [RW] current limit select 0:Iout=500-650mA,Isc=300mA ; 1:Iout=400-550mA,Isc=200mA*/ +#define LNBP21_PCL 0x80 /* [RW] short-circuit prot: 0=pulsed (dynamic) curr limiting; 1=static curr limiting*/ #include -- cgit v1.2.3 From 8c1a23312b120194a415be354808f58ace582d10 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Tue, 3 Mar 2009 11:24:18 -0300 Subject: V4L/DVB (10800): Add support for ST LNBH24 LNB power controller. The controller consist of two independent parts. Every part is similar to LNBP21, but has configurable i2c address. It is used in NetUP Dual DVB-S2 CI card. http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/Kconfig | 4 +-- drivers/media/dvb/frontends/lnbh24.h | 55 ++++++++++++++++++++++++++++++++++++ drivers/media/dvb/frontends/lnbp21.c | 41 +++++++++++++++++++++------ drivers/media/dvb/frontends/lnbp21.h | 50 +++++++++++++++++++++++--------- 4 files changed, 126 insertions(+), 24 deletions(-) create mode 100644 drivers/media/dvb/frontends/lnbh24.h (limited to 'drivers/media/dvb/frontends/lnbp21.h') diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 649ac75aaefa..d3cfced2ce23 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -453,11 +453,11 @@ comment "SEC control devices for DVB-S" depends on DVB_CORE config DVB_LNBP21 - tristate "LNBP21 SEC controller" + tristate "LNBP21/LNBH24 SEC controllers" depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help - An SEC control chip. + An SEC control chips. config DVB_ISL6405 tristate "ISL6405 SEC controller" diff --git a/drivers/media/dvb/frontends/lnbh24.h b/drivers/media/dvb/frontends/lnbh24.h new file mode 100644 index 000000000000..c059b165318f --- /dev/null +++ b/drivers/media/dvb/frontends/lnbh24.h @@ -0,0 +1,55 @@ +/* + * lnbh24.h - driver for lnb supply and control ic lnbh24 + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _LNBH24_H +#define _LNBH24_H + +/* system register bits */ +#define LNBH24_OLF 0x01 +#define LNBH24_OTF 0x02 +#define LNBH24_EN 0x04 +#define LNBH24_VSEL 0x08 +#define LNBH24_LLC 0x10 +#define LNBH24_TEN 0x20 +#define LNBH24_TTX 0x40 +#define LNBH24_PCL 0x80 + +#include + +#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) \ + && defined(MODULE)) +/* override_set and override_clear control which + system register bits (above) to always set & clear */ +extern struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear, u8 i2c_addr); +#else +static inline struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear, u8 i2c_addr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb/frontends/lnbp21.c b/drivers/media/dvb/frontends/lnbp21.c index 76f935d9755a..772a0bbb0dd8 100644 --- a/drivers/media/dvb/frontends/lnbp21.c +++ b/drivers/media/dvb/frontends/lnbp21.c @@ -1,7 +1,8 @@ /* - * lnbp21.h - driver for lnb supply and control ic lnbp21 + * lnbp21.c - driver for lnb supply and control ic lnbp21 * * Copyright (C) 2006 Oliver Endriss + * Copyright (C) 2009 Igor M. Liplianin * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -33,18 +34,21 @@ #include "dvb_frontend.h" #include "lnbp21.h" +#include "lnbh24.h" struct lnbp21 { u8 config; u8 override_or; u8 override_and; struct i2c_adapter *i2c; + u8 i2c_addr; }; -static int lnbp21_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +static int lnbp21_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) { struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, + struct i2c_msg msg = { .addr = lnbp21->i2c_addr, .flags = 0, .buf = &lnbp21->config, .len = sizeof(lnbp21->config) }; @@ -72,7 +76,7 @@ static int lnbp21_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) { struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, + struct i2c_msg msg = { .addr = lnbp21->i2c_addr, .flags = 0, .buf = &lnbp21->config, .len = sizeof(lnbp21->config) }; @@ -97,15 +101,18 @@ static void lnbp21_release(struct dvb_frontend *fe) fe->sec_priv = NULL; } -struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear) +static struct dvb_frontend *lnbx2x_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear, u8 i2c_addr, u8 config) { struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL); if (!lnbp21) return NULL; /* default configuration */ - lnbp21->config = LNBP21_ISEL; + lnbp21->config = config; lnbp21->i2c = i2c; + lnbp21->i2c_addr = i2c_addr; fe->sec_priv = lnbp21; /* bits which should be forced to '1' */ @@ -126,11 +133,29 @@ struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter * /* override frontend ops */ fe->ops.set_voltage = lnbp21_set_voltage; fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; + printk(KERN_INFO "LNBx2x attached on addr=%x", lnbp21->i2c_addr); return fe; } + +struct dvb_frontend *lnbp24_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear, u8 i2c_addr) +{ + return lnbx2x_attach(fe, i2c, override_set, override_clear, + i2c_addr, LNBH24_TTX); +} +EXPORT_SYMBOL(lnbh24_attach); + +struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear) +{ + return lnbx2x_attach(fe, i2c, override_set, override_clear, + 0x08, LNBP21_ISEL); +} EXPORT_SYMBOL(lnbp21_attach); -MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp21"); -MODULE_AUTHOR("Oliver Endriss"); +MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp21, lnbh24"); +MODULE_AUTHOR("Oliver Endriss, Igor M. Liplianin"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h index b8745887492c..fcdf1c650dde 100644 --- a/drivers/media/dvb/frontends/lnbp21.h +++ b/drivers/media/dvb/frontends/lnbp21.h @@ -28,26 +28,48 @@ #define _LNBP21_H /* system register bits */ -#define LNBP21_OLF 0x01 /* [R-only] 0=OK; 1=over current limit flag*/ -#define LNBP21_OTF 0x02 /* [R-only] 0=OK; 1=over temperature flag (150degC typ) */ -#define LNBP21_EN 0x04 /* [RW] 0=disable LNB power, enable loopthrough; 1=enable LNB power, disable loopthrough*/ -#define LNBP21_VSEL 0x08 /* [RW] 0=low voltage (13/14V, vert pol); 1=high voltage (18/19V,horiz pol) */ -#define LNBP21_LLC 0x10 /* [RW] increase LNB voltage by 1V: 0=13/18V; 1=14/19V */ -#define LNBP21_TEN 0x20 /* [RW] 0=tone controlled by DSQIN pin; 1=tone enable, disable DSQIN */ -#define LNBP21_ISEL 0x40 /* [RW] current limit select 0:Iout=500-650mA,Isc=300mA ; 1:Iout=400-550mA,Isc=200mA*/ -#define LNBP21_PCL 0x80 /* [RW] short-circuit prot: 0=pulsed (dynamic) curr limiting; 1=static curr limiting*/ +/* [RO] 0=OK; 1=over current limit flag */ +#define LNBP21_OLF 0x01 +/* [RO] 0=OK; 1=over temperature flag (150 C) */ +#define LNBP21_OTF 0x02 +/* [RW] 0=disable LNB power, enable loopthrough + 1=enable LNB power, disable loopthrough */ +#define LNBP21_EN 0x04 +/* [RW] 0=low voltage (13/14V, vert pol) + 1=high voltage (18/19V,horiz pol) */ +#define LNBP21_VSEL 0x08 +/* [RW] increase LNB voltage by 1V: + 0=13/18V; 1=14/19V */ +#define LNBP21_LLC 0x10 +/* [RW] 0=tone controlled by DSQIN pin + 1=tone enable, disable DSQIN */ +#define LNBP21_TEN 0x20 +/* [RW] current limit select: + 0:Iout=500-650mA Isc=300mA + 1:Iout=400-550mA Isc=200mA */ +#define LNBP21_ISEL 0x40 +/* [RW] short-circuit protect: + 0=pulsed (dynamic) curr limiting + 1=static curr limiting */ +#define LNBP21_PCL 0x80 #include -#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) && defined(MODULE)) -/* override_set and override_clear control which system register bits (above) to always set & clear */ -extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear); +#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) \ + && defined(MODULE)) +/* override_set and override_clear control which + system register bits (above) to always set & clear */ +extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear); #else -static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear) +static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 override_set, + u8 override_clear) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_LNBP21 +#endif -#endif // _LNBP21_H +#endif -- cgit v1.2.3