From 38f0fe23dc3d3de08d2e187c42569356ba6b72bc Mon Sep 17 00:00:00 2001 From: Gianluca Gennari Date: Thu, 15 Mar 2012 13:33:48 -0300 Subject: [media] em28xx-dvb: enable LNA for cxd2820r in DVB-T mode Enable the LNA amplifier also for DVB-T (like for DVB-T2 and DVB-C); this greatly improves reception of weak signals without affecting the reception of the strong ones. Experimental data (collected with the mipsel STB) on the weakest frequencies available in my area: LNA OFF: MUX level BER picture RAI mux 4 72% 32000 corrupted TIMB 2 75% 14 OK TVA Vicenza 68% 32000 corrupted RAI mux 2 78% 14 OK LNA ON: MUX level BER picture RAI mux 4 73% 1500 OK TIMB 2 76% 0 OK TVA Vicenza 69% 0 OK RAI mux 2 79% 0 OK Moreover, with LNA enabled, the PCTV 290e was able to pick up 2 new frequencies matching the integrated tuner of my Panasonic G20 TV, which is really good. Signed-off-by: Gianluca Gennari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-dvb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/media/video/em28xx/em28xx-dvb.c') diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 2d73ee2abf7e..ea3810fa5a15 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -542,7 +542,8 @@ static struct cxd2820r_config em28xx_cxd2820r_config = { .i2c_address = (0xd8 >> 1), .ts_mode = CXD2820R_TS_SERIAL, - /* enable LNA for DVB-T2 and DVB-C */ + /* enable LNA for DVB-T, DVB-T2 and DVB-C */ + .gpio_dvbt[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L, .gpio_dvbt2[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L, .gpio_dvbc[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L, }; -- cgit v1.2.3