From b4756707152700c96acdfe149cb1ca4cec306c7a Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sat, 2 Sep 2017 07:42:42 -0400 Subject: media: dvb: i2c transfers over usb cannot be done from stack Since commit 29d2fef8be11 ("usb: catch attempts to submit urbs with a vmalloc'd transfer buffer"), the AverMedia AverTV DVB-T USB 2.0 (a800) fails to probe. Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/dib3000mc.c | 50 ++++++++++++++++++++++------ drivers/media/dvb-frontends/dvb-pll.c | 22 +++++++++--- drivers/media/tuners/mt2060.c | 59 ++++++++++++++++++++++++++------- 3 files changed, 103 insertions(+), 28 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/dvb-frontends/dib3000mc.c b/drivers/media/dvb-frontends/dib3000mc.c index 224283fe100a..4d086a7248e9 100644 --- a/drivers/media/dvb-frontends/dib3000mc.c +++ b/drivers/media/dvb-frontends/dib3000mc.c @@ -55,29 +55,57 @@ struct dib3000mc_state { static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg) { - u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff }; - u8 rb[2]; struct i2c_msg msg[2] = { - { .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 }, - { .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 }, + { .addr = state->i2c_addr >> 1, .flags = 0, .len = 2 }, + { .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .len = 2 }, }; + u16 word; + u8 *b; + + b = kmalloc(4, GFP_KERNEL); + if (!b) + return 0; + + b[0] = (reg >> 8) | 0x80; + b[1] = reg; + b[2] = 0; + b[3] = 0; + + msg[0].buf = b; + msg[1].buf = b + 2; if (i2c_transfer(state->i2c_adap, msg, 2) != 2) dprintk("i2c read error on %d\n",reg); - return (rb[0] << 8) | rb[1]; + word = (b[2] << 8) | b[3]; + kfree(b); + + return word; } static int dib3000mc_write_word(struct dib3000mc_state *state, u16 reg, u16 val) { - u8 b[4] = { - (reg >> 8) & 0xff, reg & 0xff, - (val >> 8) & 0xff, val & 0xff, - }; struct i2c_msg msg = { - .addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4 + .addr = state->i2c_addr >> 1, .flags = 0, .len = 4 }; - return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0; + int rc; + u8 *b; + + b = kmalloc(4, GFP_KERNEL); + if (!b) + return -ENOMEM; + + b[0] = reg >> 8; + b[1] = reg; + b[2] = val >> 8; + b[3] = val; + + msg.buf = b; + + rc = i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0; + kfree(b); + + return rc; } static int dib3000mc_identify(struct dib3000mc_state *state) diff --git a/drivers/media/dvb-frontends/dvb-pll.c b/drivers/media/dvb-frontends/dvb-pll.c index 7bec3e028bee..5553b89b804e 100644 --- a/drivers/media/dvb-frontends/dvb-pll.c +++ b/drivers/media/dvb-frontends/dvb-pll.c @@ -753,13 +753,19 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, struct i2c_adapter *i2c, unsigned int pll_desc_id) { - u8 b1 [] = { 0 }; - struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD, - .buf = b1, .len = 1 }; + u8 *b1; + struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD, .len = 1 }; struct dvb_pll_priv *priv = NULL; int ret; const struct dvb_pll_desc *desc; + b1 = kmalloc(1, GFP_KERNEL); + if (!b1) + return NULL; + + b1[0] = 0; + msg.buf = b1; + if ((id[dvb_pll_devcount] > DVB_PLL_UNDEFINED) && (id[dvb_pll_devcount] < ARRAY_SIZE(pll_list))) pll_desc_id = id[dvb_pll_devcount]; @@ -773,15 +779,19 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, fe->ops.i2c_gate_ctrl(fe, 1); ret = i2c_transfer (i2c, &msg, 1); - if (ret != 1) + if (ret != 1) { + kfree(b1); return NULL; + } if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); } priv = kzalloc(sizeof(struct dvb_pll_priv), GFP_KERNEL); - if (priv == NULL) + if (!priv) { + kfree(b1); return NULL; + } priv->pll_i2c_address = pll_addr; priv->i2c = i2c; @@ -811,6 +821,8 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, "insmod option" : "autodetected"); } + kfree(b1); + return fe; } EXPORT_SYMBOL(dvb_pll_attach); diff --git a/drivers/media/tuners/mt2060.c b/drivers/media/tuners/mt2060.c index 2e487f9a2cc3..4983eeb39f36 100644 --- a/drivers/media/tuners/mt2060.c +++ b/drivers/media/tuners/mt2060.c @@ -38,41 +38,74 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); static int mt2060_readreg(struct mt2060_priv *priv, u8 reg, u8 *val) { struct i2c_msg msg[2] = { - { .addr = priv->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 }, - { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 }, + { .addr = priv->cfg->i2c_address, .flags = 0, .len = 1 }, + { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .len = 1 }, }; + int rc = 0; + u8 *b; + + b = kmalloc(2, GFP_KERNEL); + if (!b) + return -ENOMEM; + + b[0] = reg; + b[1] = 0; + + msg[0].buf = b; + msg[1].buf = b + 1; if (i2c_transfer(priv->i2c, msg, 2) != 2) { printk(KERN_WARNING "mt2060 I2C read failed\n"); - return -EREMOTEIO; + rc = -EREMOTEIO; } - return 0; + *val = b[1]; + kfree(b); + + return rc; } // Writes a single register static int mt2060_writereg(struct mt2060_priv *priv, u8 reg, u8 val) { - u8 buf[2] = { reg, val }; struct i2c_msg msg = { - .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2 + .addr = priv->cfg->i2c_address, .flags = 0, .len = 2 }; + u8 *buf; + int rc = 0; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = reg; + buf[1] = val; + + msg.buf = buf; if (i2c_transfer(priv->i2c, &msg, 1) != 1) { printk(KERN_WARNING "mt2060 I2C write failed\n"); - return -EREMOTEIO; + rc = -EREMOTEIO; } - return 0; + kfree(buf); + return rc; } // Writes a set of consecutive registers static int mt2060_writeregs(struct mt2060_priv *priv,u8 *buf, u8 len) { int rem, val_len; - u8 xfer_buf[16]; + u8 *xfer_buf; + int rc = 0; struct i2c_msg msg = { - .addr = priv->cfg->i2c_address, .flags = 0, .buf = xfer_buf + .addr = priv->cfg->i2c_address, .flags = 0 }; + xfer_buf = kmalloc(16, GFP_KERNEL); + if (!xfer_buf) + return -ENOMEM; + + msg.buf = xfer_buf; + for (rem = len - 1; rem > 0; rem -= priv->i2c_max_regs) { val_len = min_t(int, rem, priv->i2c_max_regs); msg.len = 1 + val_len; @@ -81,11 +114,13 @@ static int mt2060_writeregs(struct mt2060_priv *priv,u8 *buf, u8 len) if (i2c_transfer(priv->i2c, &msg, 1) != 1) { printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n", val_len); - return -EREMOTEIO; + rc = -EREMOTEIO; + break; } } - return 0; + kfree(xfer_buf); + return rc; } // Initialisation sequences -- cgit v1.2.3 From bbd770aee018c8f46d8f43263928440d5ac04b36 Mon Sep 17 00:00:00 2001 From: Stanimir Varbanov Date: Tue, 29 Aug 2017 04:19:43 -0400 Subject: media: venus: init registered list on streamoff Add missing init_list_head for the registered buffer list. Absence of the init could lead to a unhandled kernel paging request as below, when streamon/streamoff are called in row. [338046.571321] Unable to handle kernel paging request at virtual address fffffffffffffe00 [338046.574849] pgd = ffff800034820000 [338046.582381] [fffffffffffffe00] *pgd=00000000b60f5003[338046.582545] , *pud=00000000b1f31003 , *pmd=0000000000000000[338046.592082] [338046.597754] Internal error: Oops: 96000004 [#1] PREEMPT SMP [338046.601671] Modules linked in: venus_enc venus_dec venus_core usb_f_ecm g_ether usb_f_rndis u_ether libcomposite ipt_MASQUERADE nf_nat_masquerade_ipv4 arc4 wcn36xx mac80211 btqcomsmd btqca iptable_nat nf_co] [338046.662408] CPU: 0 PID: 5433 Comm: irq/160-venus Tainted: G W 4.9.39+ #232 [338046.668024] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [338046.675268] task: ffff80003541cb00 task.stack: ffff800026e20000 [338046.682097] PC is at venus_helper_release_buf_ref+0x28/0x88 [venus_core] [338046.688282] LR is at vdec_event_notify+0xe8/0x150 [venus_dec] [338046.695029] pc : [] lr : [] pstate: a0000145 [338046.701256] sp : ffff800026e23bc0 [338046.708494] x29: ffff800026e23bc0 x28: 0000000000000000 [338046.718853] x27: ffff000000afd4f8 x26: ffff800031faa700 [338046.729253] x25: ffff000000afd790 x24: ffff800031faa618 [338046.739664] x23: ffff800003e18138 x22: ffff800002fc9810 [338046.750109] x21: ffff800026e23c28 x20: 0000000000000001 [338046.760592] x19: ffff80002a13b800 x18: 0000000000000010 [338046.771099] x17: 0000ffffa3d01600 x16: ffff000008100428 [338046.781654] x15: 0000000000000006 x14: ffff000089045ba7 [338046.792250] x13: ffff000009045bb6 x12: 00000000004f37c8 [338046.802894] x11: 0000000000267211 x10: 0000000000000000 [338046.813574] x9 : 0000000000032000 x8 : 00000000dc400000 [338046.824274] x7 : 0000000000000000 x6 : ffff800031faa728 [338046.835005] x5 : ffff80002a13b850 x4 : 0000000000000000 [338046.845793] x3 : fffffffffffffdf8 x2 : 0000000000000000 [338046.856602] x1 : 0000000000000003 x0 : ffff80002a13b800 Signed-off-by: Stanimir Varbanov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/qcom/venus/helpers.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/media') diff --git a/drivers/media/platform/qcom/venus/helpers.c b/drivers/media/platform/qcom/venus/helpers.c index 68933d208063..9b2a401a4891 100644 --- a/drivers/media/platform/qcom/venus/helpers.c +++ b/drivers/media/platform/qcom/venus/helpers.c @@ -682,6 +682,7 @@ void venus_helper_vb2_stop_streaming(struct vb2_queue *q) hfi_session_abort(inst); load_scale_clocks(core); + INIT_LIST_HEAD(&inst->registeredbufs); } venus_helper_buffers_done(inst, VB2_BUF_STATE_ERROR); -- cgit v1.2.3 From 9b62ccdbc797ae42342bd6ca15719362d2543d24 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 29 Aug 2017 06:21:10 -0400 Subject: media: qcom: camss: Make function vfe_set_selection static The function vfe_set_selection is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'vfe_set_selection' was not declared. Should it be static? Signed-off-by: Colin Ian King Acked-by: Todor Tomov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/media') diff --git a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c index b21b3c2dc77f..b22d2dfcd3c2 100644 --- a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c +++ b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c @@ -2660,7 +2660,7 @@ static int vfe_get_selection(struct v4l2_subdev *sd, * * Return -EINVAL or zero on success */ -int vfe_set_selection(struct v4l2_subdev *sd, +static int vfe_set_selection(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel) { -- cgit v1.2.3 From e949f61461ab83b094cad564c89a8d2b078b4508 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 31 Aug 2017 12:56:10 -0400 Subject: media: s5p-cec: add NACK detection support The s5p-cec driver returned CEC_TX_STATUS_ERROR for the NACK condition. Some digging into the datasheet uncovered the S5P_CEC_TX_STAT1 register where bit 0 indicates if the transmit was nacked or not. Use this to return the correct CEC_TX_STATUS_NACK status to userspace. This was the only driver that couldn't tell a NACK from another error, and that was very unusual. And a potential problem for applications as well. Tested with my Odroid-U3. Signed-off-by: Hans Verkuil Acked-by: Sylwester Nawrocki Cc: # for v4.12 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c | 3 ++- drivers/media/platform/s5p-cec/s5p_cec.c | 11 ++++++++++- drivers/media/platform/s5p-cec/s5p_cec.h | 2 ++ 3 files changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c b/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c index 1edf667d562a..146ae6f25cdb 100644 --- a/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c +++ b/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c @@ -172,7 +172,8 @@ u32 s5p_cec_get_status(struct s5p_cec_dev *cec) { u32 status = 0; - status = readb(cec->reg + S5P_CEC_STATUS_0); + status = readb(cec->reg + S5P_CEC_STATUS_0) & 0xf; + status |= (readb(cec->reg + S5P_CEC_TX_STAT1) & 0xf) << 4; status |= readb(cec->reg + S5P_CEC_STATUS_1) << 8; status |= readb(cec->reg + S5P_CEC_STATUS_2) << 16; status |= readb(cec->reg + S5P_CEC_STATUS_3) << 24; diff --git a/drivers/media/platform/s5p-cec/s5p_cec.c b/drivers/media/platform/s5p-cec/s5p_cec.c index 58d200e7c838..8837e2678bde 100644 --- a/drivers/media/platform/s5p-cec/s5p_cec.c +++ b/drivers/media/platform/s5p-cec/s5p_cec.c @@ -92,7 +92,10 @@ static irqreturn_t s5p_cec_irq_handler(int irq, void *priv) dev_dbg(cec->dev, "irq received\n"); if (status & CEC_STATUS_TX_DONE) { - if (status & CEC_STATUS_TX_ERROR) { + if (status & CEC_STATUS_TX_NACK) { + dev_dbg(cec->dev, "CEC_STATUS_TX_NACK set\n"); + cec->tx = STATE_NACK; + } else if (status & CEC_STATUS_TX_ERROR) { dev_dbg(cec->dev, "CEC_STATUS_TX_ERROR set\n"); cec->tx = STATE_ERROR; } else { @@ -135,6 +138,12 @@ static irqreturn_t s5p_cec_irq_handler_thread(int irq, void *priv) cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0); cec->tx = STATE_IDLE; break; + case STATE_NACK: + cec_transmit_done(cec->adap, + CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_NACK, + 0, 1, 0, 0); + cec->tx = STATE_IDLE; + break; case STATE_ERROR: cec_transmit_done(cec->adap, CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_ERROR, diff --git a/drivers/media/platform/s5p-cec/s5p_cec.h b/drivers/media/platform/s5p-cec/s5p_cec.h index 8bcd8dc1aeb9..86ded522ef27 100644 --- a/drivers/media/platform/s5p-cec/s5p_cec.h +++ b/drivers/media/platform/s5p-cec/s5p_cec.h @@ -35,6 +35,7 @@ #define CEC_STATUS_TX_TRANSFERRING (1 << 1) #define CEC_STATUS_TX_DONE (1 << 2) #define CEC_STATUS_TX_ERROR (1 << 3) +#define CEC_STATUS_TX_NACK (1 << 4) #define CEC_STATUS_TX_BYTES (0xFF << 8) #define CEC_STATUS_RX_RUNNING (1 << 16) #define CEC_STATUS_RX_RECEIVING (1 << 17) @@ -55,6 +56,7 @@ enum cec_state { STATE_IDLE, STATE_BUSY, STATE_DONE, + STATE_NACK, STATE_ERROR }; -- cgit v1.2.3 From 845d6524d69b40bd6abd61dc1264a8657159aa55 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Thu, 14 Sep 2017 11:23:38 -0400 Subject: media: cec: Respond to unregistered initiators, when applicable Running CEC 1.4 compliance test we get the following error on test 11.1.6.2: "ERROR: The DUT did not broadcast a message to the unregistered device." Fix this by letting GIVE_PHYSICAL_ADDR message respond to unregistered device. Also, GIVE_DEVICE_VENDOR_ID and GIVE_FEATURES fall in the same category so, respond also to these messages. With this fix we pass CEC 1.4 official compliance. Signed-off-by: Jose Abreu Cc: Joao Pinto Signed-off-by: Hans Verkuil Cc: # for v4.10 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/cec-adap.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index dd769e40416f..84d1b67f850c 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -1794,12 +1794,19 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, */ switch (msg->msg[1]) { case CEC_MSG_GET_CEC_VERSION: - case CEC_MSG_GIVE_DEVICE_VENDOR_ID: case CEC_MSG_ABORT: case CEC_MSG_GIVE_DEVICE_POWER_STATUS: - case CEC_MSG_GIVE_PHYSICAL_ADDR: case CEC_MSG_GIVE_OSD_NAME: + /* + * These messages reply with a directed message, so ignore if + * the initiator is Unregistered. + */ + if (!adap->passthrough && from_unregistered) + return 0; + /* Fall through */ + case CEC_MSG_GIVE_DEVICE_VENDOR_ID: case CEC_MSG_GIVE_FEATURES: + case CEC_MSG_GIVE_PHYSICAL_ADDR: /* * Skip processing these messages if the passthrough mode * is on. @@ -1807,7 +1814,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, if (adap->passthrough) goto skip_processing; /* Ignore if addressing is wrong */ - if (is_broadcast || from_unregistered) + if (is_broadcast) return 0; break; -- cgit v1.2.3 From db6321a1af8432df983048d2dd8529525589f71d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 11 Sep 2017 08:35:36 -0400 Subject: media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA If NO_DMA=y: warning: (TOUCHSCREEN_SUR40 && VIDEO_TW68 && VIDEO_CX23885 && VIDEO_CX25821 && VIDEO_CX88 && VIDEO_SAA7134 && VIDEO_COBALT && VIDEO_QCOM_CAMSS) selects VIDEOBUF2_DMA_SG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA) and ERROR: "bad_dma_ops" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined! ERROR: "bad_dma_ops" [drivers/media/platform/qcom/camss-8x16/qcom-camss.ko] undefined! VIDEO_QCOM_CAMSS selects VIDEOBUF2_DMA_SG, which bypasses its dependency on HAS_DMA. Make VIDEO_QCOM_CAMSS depend on HAS_DMA to fix this. Fixes: f5c074947f56533c ("media: camss: Enable building") Signed-off-by: Geert Uytterhoeven Signed-off-by: Hans Verkuil --- drivers/media/platform/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/media') diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 7e7cc49b8674..3c4f7fa7b9d8 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -112,7 +112,7 @@ config VIDEO_PXA27x config VIDEO_QCOM_CAMSS tristate "Qualcomm 8x16 V4L2 Camera Subsystem driver" - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST select VIDEOBUF2_DMA_SG select V4L2_FWNODE -- cgit v1.2.3 From ead666000a5fe34bdc82d61838e4df2d416ea15e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 12 Sep 2017 05:58:26 -0400 Subject: media: dvb_frontend: only use kref after initialized As reported by Laurent, when a DVB frontend need to register two drivers (e. g. a tuner and a demod), if the second driver fails to register (for example because it was not compiled), the error handling logic frees the frontend by calling dvb_frontend_detach(). That used to work fine, but changeset 1f862a68df24 ("[media] dvb_frontend: move kref to struct dvb_frontend") added a kref at struct dvb_frontend. So, now, instead of just freeing the data, the error handling do a kref_put(). That works fine only after dvb_register_frontend() succeeds. While it would be possible to add a helper function that would be initializing earlier the kref, that would require changing every single DVB frontend on non-trivial ways, and would make frontends different than other drivers. So, instead of doing that, let's focus on the real issue: only call kref_put() after kref_init(). That's easy to check, as, when the dvb frontend is successfuly registered, it will allocate its own private struct. So, if such struct is allocated, it means that it is safe to use kref_put(). If not, then nobody is using yet the frontend, and it is safe to just deallocate it. Fixes: 1f862a68df24 ("[media] dvb_frontend: move kref to struct dvb_frontend") Reported-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-core/dvb_frontend.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c index 2fcba1616168..9139d01ba7ed 100644 --- a/drivers/media/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -141,22 +141,39 @@ struct dvb_frontend_private { static void dvb_frontend_invoke_release(struct dvb_frontend *fe, void (*release)(struct dvb_frontend *fe)); -static void dvb_frontend_free(struct kref *ref) +static void __dvb_frontend_free(struct dvb_frontend *fe) { - struct dvb_frontend *fe = - container_of(ref, struct dvb_frontend, refcount); struct dvb_frontend_private *fepriv = fe->frontend_priv; + if (!fepriv) + return; + dvb_free_device(fepriv->dvbdev); dvb_frontend_invoke_release(fe, fe->ops.release); kfree(fepriv); + fe->frontend_priv = NULL; +} + +static void dvb_frontend_free(struct kref *ref) +{ + struct dvb_frontend *fe = + container_of(ref, struct dvb_frontend, refcount); + + __dvb_frontend_free(fe); } static void dvb_frontend_put(struct dvb_frontend *fe) { - kref_put(&fe->refcount, dvb_frontend_free); + /* + * Check if the frontend was registered, as otherwise + * kref was not initialized yet. + */ + if (fe->frontend_priv) + kref_put(&fe->refcount, dvb_frontend_free); + else + __dvb_frontend_free(fe); } static void dvb_frontend_get(struct dvb_frontend *fe) -- cgit v1.2.3