From 338a128142975439a19ab3c91480bc9d5a71f033 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Thu, 6 Nov 2014 15:48:03 +0200 Subject: mfd: Add support for Diolan DLN-2 devices This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO Master Adapter DLN-2. Details about the device can be found here: https://www.diolan.com/i2c/i2c_interface.html. Information about the USB protocol can be found in the Programmer's Reference Manual [1], see section 1.7. Because the hardware has a single transmit endpoint and a single receive endpoint the communication between the various DLN2 drivers and the hardware will be muxed/demuxed by this driver. Each DLN2 module will be identified by the handle field within the DLN2 message header. If a DLN2 module issues multiple commands in parallel they will be identified by the echo counter field in the message header. The DLN2 modules can use the dln2_transfer() function to issue a command and wait for its response. They can also register a callback that is going to be called when a specific event id is generated by the device (e.g. GPIO interrupts). The device uses handle 0 for sending events. [1] https://www.diolan.com/downloads/dln-api-manual.pdf Signed-off-by: Octavian Purdila Reviewed-by: Johan Hovold Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1456ea70bbc7..c1acc76a519f 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -183,6 +183,16 @@ config MFD_DA9063 Additional drivers must be enabled in order to use the functionality of the device. +config MFD_DLN2 + tristate "Diolan DLN2 support" + select MFD_CORE + depends on USB + help + This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter + DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2, + etc. must be enabled in order to use the functionality of + the device. + config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) -- cgit v1.2.3