From 4107da2a2853c070fb3effa58a83f94dc067fc44 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Thu, 17 Sep 2009 08:54:03 -0400 Subject: mfd: Add 88PM8607 driver This adds a core driver for 88PM8607 found in Marvell DKB development platform. This driver is a proxy for all accesses to 88PM8607 sub-drivers which will be merged on top of this one, RTC, regulators, battery and so on. This chip is manufactured by Marvell. Signed-off-by: Haojian Zhuang Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index a296e717e86e..26a36f887357 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -319,6 +319,16 @@ config EZX_PCAP This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. +config MFD_88PM8607 + bool "Support Marvell 88PM8607" + depends on I2C + select MFD_CORE + help + This supports for Marvell 88PM8607 Power Management IC. This includes + the I2C driver and the core APIs _only_, you have to select + individual components like voltage regulators, RTC and + battery-charger under the corresponding menus. + endmenu menu "Multimedia Capabilities Port drivers" -- cgit v1.2.3 From 0c41839e98272a317d4af4dfcb54b599b2c3dcba Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Mon, 12 Oct 2009 17:11:52 +0200 Subject: mfd: add AB4500 driver This adds core driver support for AB4500 mixed signal multimedia & power management chip. This connects to U8500 on the SSP (pl022) and exports read/write functions for the device to get access to this chip. This also registers the client devices and sets the parent. Signed-off-by: srinidhi kasagar Acked-by: Andrea Gallo Reviewed-by: Mark Brown Reviewed-by: Jean-Christophe Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 1 + drivers/mfd/ab4500-core.c | 207 +++++++++++++++++++++++++++++++++++ include/linux/mfd/ab4500.h | 262 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 480 insertions(+) create mode 100644 drivers/mfd/ab4500-core.c create mode 100644 include/linux/mfd/ab4500.h (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 26a36f887357..2aea25ba7ba0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -329,6 +329,16 @@ config MFD_88PM8607 individual components like voltage regulators, RTC and battery-charger under the corresponding menus. +config AB4500_CORE + tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" + depends on SPI + default y + help + Select this option to enable access to AB4500 power management + chip. This connects to U8500 on the SSP/SPI bus and exports + read/write functions for the devices to get access to this chip. + This chip embeds various other multimedia funtionalities as well. + endmenu menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2596add427a2..1792b1ff8ffc 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -52,4 +52,5 @@ obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o +obj-$(CONFIG_AB4500_CORE) += ab4500-core.o obj-$(CONFIG_MFD_88PM8607) += 88pm8607.o diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c new file mode 100644 index 000000000000..3ad91f7ee22b --- /dev/null +++ b/drivers/mfd/ab4500-core.c @@ -0,0 +1,207 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * Author: Srinidhi KASAGAR + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation. + * + * AB4500 is a companion power management chip used with U8500. + * On this platform, this is interfaced with SSP0 controller + * which is a ARM primecell pl022. + * + * At the moment the module just exports read/write features. + * Interrupt management to be added - TODO. + */ +#include +#include +#include +#include +#include +#include + +/* just required if probe fails, we need to + * unregister the device + */ +static struct spi_driver ab4500_driver; + +/* + * This funtion writes to any AB4500 registers using + * SPI protocol & before it writes it packs the data + * in the below 24 bit frame format + * + * *|------------------------------------| + * *| 23|22...18|17.......10|9|8|7......0| + * *| r/w bank adr data | + * * ------------------------------------ + * + * This function shouldn't be called from interrupt + * context + */ +int ab4500_write(struct ab4500 *ab4500, unsigned char block, + unsigned long addr, unsigned char data) +{ + struct spi_transfer xfer; + struct spi_message msg; + int err; + unsigned long spi_data = + block << 18 | addr << 10 | data; + + mutex_lock(&ab4500->lock); + ab4500->tx_buf[0] = spi_data; + ab4500->rx_buf[0] = 0; + + xfer.tx_buf = ab4500->tx_buf; + xfer.rx_buf = NULL; + xfer.len = sizeof(unsigned long); + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + err = spi_sync(ab4500->spi, &msg); + mutex_unlock(&ab4500->lock); + + return err; +} +EXPORT_SYMBOL(ab4500_write); + +int ab4500_read(struct ab4500 *ab4500, unsigned char block, + unsigned long addr) +{ + struct spi_transfer xfer; + struct spi_message msg; + unsigned long spi_data = + 1 << 23 | block << 18 | addr << 10; + + mutex_lock(&ab4500->lock); + ab4500->tx_buf[0] = spi_data; + ab4500->rx_buf[0] = 0; + + xfer.tx_buf = ab4500->tx_buf; + xfer.rx_buf = ab4500->rx_buf; + xfer.len = sizeof(unsigned long); + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + spi_sync(ab4500->spi, &msg); + mutex_unlock(&ab4500->lock); + + return ab4500->rx_buf[0]; +} +EXPORT_SYMBOL(ab4500_read); + +/* ref: ab3100 core */ +#define AB4500_DEVICE(devname, devid) \ +static struct platform_device ab4500_##devname##_device = { \ + .name = devid, \ + .id = -1, \ +} + +/* list of childern devices of ab4500 - all are + * not populated here - TODO + */ +AB4500_DEVICE(charger, "ab4500-charger"); +AB4500_DEVICE(audio, "ab4500-audio"); +AB4500_DEVICE(usb, "ab4500-usb"); +AB4500_DEVICE(tvout, "ab4500-tvout"); +AB4500_DEVICE(sim, "ab4500-sim"); +AB4500_DEVICE(gpadc, "ab4500-gpadc"); +AB4500_DEVICE(clkmgt, "ab4500-clkmgt"); +AB4500_DEVICE(misc, "ab4500-misc"); + +static struct platform_device *ab4500_platform_devs[] = { + &ab4500_charger_device, + &ab4500_audio_device, + &ab4500_usb_device, + &ab4500_tvout_device, + &ab4500_sim_device, + &ab4500_gpadc_device, + &ab4500_clkmgt_device, + &ab4500_misc_device, +}; + +static int __init ab4500_probe(struct spi_device *spi) +{ + struct ab4500 *ab4500; + unsigned char revision; + int err = 0; + int i; + + ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL); + if (!ab4500) { + dev_err(&spi->dev, "could not allocate AB4500\n"); + err = -ENOMEM; + goto not_detect; + } + + ab4500->spi = spi; + spi_set_drvdata(spi, ab4500); + + mutex_init(&ab4500->lock); + + /* read the revision register */ + revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG); + + /* revision id 0x0 is for early drop, 0x10 is for cut1.0 */ + if (revision == 0x0 || revision == 0x10) + dev_info(&spi->dev, "Detected chip: %s, revision = %x\n", + ab4500_driver.driver.name, revision); + else { + dev_err(&spi->dev, "unknown chip: 0x%x\n", revision); + goto not_detect; + } + + for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++) { + ab4500_platform_devs[i]->dev.parent = + &spi->dev; + platform_set_drvdata(ab4500_platform_devs[i], ab4500); + } + + /* register the ab4500 platform devices */ + platform_add_devices(ab4500_platform_devs, + ARRAY_SIZE(ab4500_platform_devs)); + + return err; + + not_detect: + spi_unregister_driver(&ab4500_driver); + kfree(ab4500); + return err; +} + +static int __devexit ab4500_remove(struct spi_device *spi) +{ + struct ab4500 *ab4500 = + spi_get_drvdata(spi); + + kfree(ab4500); + + return 0; +} + +static struct spi_driver ab4500_driver = { + .driver = { + .name = "ab4500", + .owner = THIS_MODULE, + }, + .probe = ab4500_probe, + .remove = __devexit_p(ab4500_remove) +}; + +static int __devinit ab4500_init(void) +{ + return spi_register_driver(&ab4500_driver); +} + +static void __exit ab4500_exit(void) +{ + spi_unregister_driver(&ab4500_driver); +} + +subsys_initcall_sync(ab4500_init); + +MODULE_AUTHOR("Srinidhi KASAGAR + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * AB4500 device core funtions, for client access + */ +#ifndef MFD_AB4500_H +#define MFD_AB4500_H + +#include + +/* + * AB4500 bank addresses + */ +#define AB4500_SYS_CTRL1_BLOCK 0x1 +#define AB4500_SYS_CTRL2_BLOCK 0x2 +#define AB4500_REGU_CTRL1 0x3 +#define AB4500_REGU_CTRL2 0x4 +#define AB4500_USB 0x5 +#define AB4500_TVOUT 0x6 +#define AB4500_DBI 0x7 +#define AB4500_ECI_AV_ACC 0x8 +#define AB4500_RESERVED 0x9 +#define AB4500_GPADC 0xA +#define AB4500_CHARGER 0xB +#define AB4500_GAS_GAUGE 0xC +#define AB4500_AUDIO 0xD +#define AB4500_INTERRUPT 0xE +#define AB4500_RTC 0xF +#define AB4500_MISC 0x10 +#define AB4500_DEBUG 0x12 +#define AB4500_PROD_TEST 0x13 +#define AB4500_OTP_EMUL 0x15 + +/* + * System control 1 register offsets. + * Bank = 0x01 + */ +#define AB4500_TURNON_STAT_REG 0x0100 +#define AB4500_RESET_STAT_REG 0x0101 +#define AB4500_PONKEY1_PRESS_STAT_REG 0x0102 + +#define AB4500_FSM_STAT1_REG 0x0140 +#define AB4500_FSM_STAT2_REG 0x0141 +#define AB4500_SYSCLK_REQ_STAT_REG 0x0142 +#define AB4500_USB_STAT1_REG 0x0143 +#define AB4500_USB_STAT2_REG 0x0144 +#define AB4500_STATUS_SPARE1_REG 0x0145 +#define AB4500_STATUS_SPARE2_REG 0x0146 + +#define AB4500_CTRL1_REG 0x0180 +#define AB4500_CTRL2_REG 0x0181 + +/* + * System control 2 register offsets. + * bank = 0x02 + */ +#define AB4500_CTRL3_REG 0x0200 +#define AB4500_MAIN_WDOG_CTRL_REG 0x0201 +#define AB4500_MAIN_WDOG_TIMER_REG 0x0202 +#define AB4500_LOW_BAT_REG 0x0203 +#define AB4500_BATT_OK_REG 0x0204 +#define AB4500_SYSCLK_TIMER_REG 0x0205 +#define AB4500_SMPSCLK_CTRL_REG 0x0206 +#define AB4500_SMPSCLK_SEL1_REG 0x0207 +#define AB4500_SMPSCLK_SEL2_REG 0x0208 +#define AB4500_SMPSCLK_SEL3_REG 0x0209 +#define AB4500_SYSULPCLK_CONF_REG 0x020A +#define AB4500_SYSULPCLK_CTRL1_REG 0x020B +#define AB4500_SYSCLK_CTRL_REG 0x020C +#define AB4500_SYSCLK_REQ1_VALID_REG 0x020D +#define AB4500_SYSCLK_REQ_VALID_REG 0x020E +#define AB4500_SYSCTRL_SPARE_REG 0x020F +#define AB4500_PAD_CONF_REG 0x0210 + +/* + * Regu control1 register offsets + * Bank = 0x03 + */ +#define AB4500_REGU_SERIAL_CTRL1_REG 0x0300 +#define AB4500_REGU_SERIAL_CTRL2_REG 0x0301 +#define AB4500_REGU_SERIAL_CTRL3_REG 0x0302 +#define AB4500_REGU_REQ_CTRL1_REG 0x0303 +#define AB4500_REGU_REQ_CTRL2_REG 0x0304 +#define AB4500_REGU_REQ_CTRL3_REG 0x0305 +#define AB4500_REGU_REQ_CTRL4_REG 0x0306 +#define AB4500_REGU_MISC1_REG 0x0380 +#define AB4500_REGU_OTGSUPPLY_CTRL_REG 0x0381 +#define AB4500_REGU_VUSB_CTRL_REG 0x0382 +#define AB4500_REGU_VAUDIO_SUPPLY_REG 0x0383 +#define AB4500_REGU_CTRL1_SPARE_REG 0x0384 + +/* + * Regu control2 Vmod register offsets + */ +#define AB4500_REGU_VMOD_REGU_REG 0x0440 +#define AB4500_REGU_VMOD_SEL1_REG 0x0441 +#define AB4500_REGU_VMOD_SEL2_REG 0x0442 +#define AB4500_REGU_CTRL_DISCH_REG 0x0443 +#define AB4500_REGU_CTRL_DISCH2_REG 0x0444 + +/* + * USB/ULPI register offsets + * Bank : 0x5 + */ +#define AB4500_USB_LINE_STAT_REG 0x0580 +#define AB4500_USB_LINE_CTRL1_REG 0x0581 +#define AB4500_USB_LINE_CTRL2_REG 0x0582 +#define AB4500_USB_LINE_CTRL3_REG 0x0583 +#define AB4500_USB_LINE_CTRL4_REG 0x0584 +#define AB4500_USB_LINE_CTRL5_REG 0x0585 +#define AB4500_USB_OTG_CTRL_REG 0x0587 +#define AB4500_USB_OTG_STAT_REG 0x0588 +#define AB4500_USB_OTG_STAT_REG 0x0588 +#define AB4500_USB_CTRL_SPARE_REG 0x0589 +#define AB4500_USB_PHY_CTRL_REG 0x058A + +/* + * TVOUT / CTRL register offsets + * Bank : 0x06 + */ +#define AB4500_TVOUT_CTRL_REG 0x0680 + +/* + * DBI register offsets + * Bank : 0x07 + */ +#define AB4500_DBI_REG1_REG 0x0700 +#define AB4500_DBI_REG2_REG 0x0701 + +/* + * ECI regsiter offsets + * Bank : 0x08 + */ +#define AB4500_ECI_CTRL_REG 0x0800 +#define AB4500_ECI_HOOKLEVEL_REG 0x0801 +#define AB4500_ECI_DATAOUT_REG 0x0802 +#define AB4500_ECI_DATAIN_REG 0x0803 + +/* + * AV Connector register offsets + * Bank : 0x08 + */ +#define AB4500_AV_CONN_REG 0x0840 + +/* + * Accessory detection register offsets + * Bank : 0x08 + */ +#define AB4500_ACC_DET_DB1_REG 0x0880 +#define AB4500_ACC_DET_DB2_REG 0x0881 + +/* + * GPADC register offsets + * Bank : 0x0A + */ +#define AB4500_GPADC_CTRL1_REG 0x0A00 +#define AB4500_GPADC_CTRL2_REG 0x0A01 +#define AB4500_GPADC_CTRL3_REG 0x0A02 +#define AB4500_GPADC_AUTO_TIMER_REG 0x0A03 +#define AB4500_GPADC_STAT_REG 0x0A04 +#define AB4500_GPADC_MANDATAL_REG 0x0A05 +#define AB4500_GPADC_MANDATAH_REG 0x0A06 +#define AB4500_GPADC_AUTODATAL_REG 0x0A07 +#define AB4500_GPADC_AUTODATAH_REG 0x0A08 +#define AB4500_GPADC_MUX_CTRL_REG 0x0A09 + +/* + * Charger / status register offfsets + * Bank : 0x0B + */ +#define AB4500_CH_STATUS1_REG 0x0B00 +#define AB4500_CH_STATUS2_REG 0x0B01 +#define AB4500_CH_USBCH_STAT1_REG 0x0B02 +#define AB4500_CH_USBCH_STAT2_REG 0x0B03 +#define AB4500_CH_FSM_STAT_REG 0x0B04 +#define AB4500_CH_STAT_REG 0x0B05 + +/* + * Charger / control register offfsets + * Bank : 0x0B + */ +#define AB4500_CH_VOLT_LVL_REG 0x0B40 + +/* + * Charger / main control register offfsets + * Bank : 0x0B + */ +#define AB4500_MCH_CTRL1 0x0B80 +#define AB4500_MCH_CTRL2 0x0B81 +#define AB4500_MCH_IPT_CURLVL_REG 0x0B82 +#define AB4500_CH_WD_REG 0x0B83 + +/* + * Charger / USB control register offsets + * Bank : 0x0B + */ +#define AB4500_USBCH_CTRL1_REG 0x0BC0 +#define AB4500_USBCH_CTRL2_REG 0x0BC1 +#define AB4500_USBCH_IPT_CRNTLVL_REG 0x0BC2 + +/* + * RTC bank register offsets + * Bank : 0xF + */ +#define AB4500_RTC_SOFF_STAT_REG 0x0F00 +#define AB4500_RTC_CC_CONF_REG 0x0F01 +#define AB4500_RTC_READ_REQ_REG 0x0F02 +#define AB4500_RTC_WATCH_TSECMID_REG 0x0F03 +#define AB4500_RTC_WATCH_TSECHI_REG 0x0F04 +#define AB4500_RTC_WATCH_TMIN_LOW_REG 0x0F05 +#define AB4500_RTC_WATCH_TMIN_MID_REG 0x0F06 +#define AB4500_RTC_WATCH_TMIN_HI_REG 0x0F07 +#define AB4500_RTC_ALRM_MIN_LOW_REG 0x0F08 +#define AB4500_RTC_ALRM_MIN_MID_REG 0x0F09 +#define AB4500_RTC_ALRM_MIN_HI_REG 0x0F0A +#define AB4500_RTC_STAT_REG 0x0F0B +#define AB4500_RTC_BKUP_CHG_REG 0x0F0C +#define AB4500_RTC_FORCE_BKUP_REG 0x0F0D +#define AB4500_RTC_CALIB_REG 0x0F0E +#define AB4500_RTC_SWITCH_STAT_REG 0x0F0F + +/* + * PWM Out generators + * Bank: 0x10 + */ +#define AB4500_PWM_OUT_CTRL1_REG 0x1060 +#define AB4500_PWM_OUT_CTRL2_REG 0x1061 +#define AB4500_PWM_OUT_CTRL3_REG 0x1062 +#define AB4500_PWM_OUT_CTRL4_REG 0x1063 +#define AB4500_PWM_OUT_CTRL5_REG 0x1064 +#define AB4500_PWM_OUT_CTRL6_REG 0x1065 +#define AB4500_PWM_OUT_CTRL7_REG 0x1066 + +#define AB4500_I2C_PAD_CTRL_REG 0x1067 +#define AB4500_REV_REG 0x1080 + +/** + * struct ab4500 + * @spi: spi device structure + * @tx_buf: transmit buffer + * @rx_buf: receive buffer + * @lock: sync primitive + */ +struct ab4500 { + struct spi_device *spi; + unsigned long tx_buf[4]; + unsigned long rx_buf[4]; + struct mutex lock; +}; + +int ab4500_write(struct ab4500 *ab4500, unsigned char block, + unsigned long addr, unsigned char data); +int ab4500_read(struct ab4500 *ab4500, unsigned char block, + unsigned long addr); + +#endif /* MFD_AB4500_H */ -- cgit v1.2.3 From d4e0a89e3d170affa896efcdb4320e38a2f3a546 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 1 Oct 2009 15:41:07 +0100 Subject: mfd: Add support for WM8320 PMICs The WM8320 is an integrated power management subsystem providing voltage regulators, RTC, watchdog and other functionality. The WM8320 is derived from the WM831x and therefore shares most of the driver code with the WM831x. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 6 +- drivers/mfd/wm831x-core.c | 159 ++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/wm831x/core.h | 1 + 3 files changed, 163 insertions(+), 3 deletions(-) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2aea25ba7ba0..b0b3e42e7ee6 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -185,12 +185,12 @@ config MFD_WM8400 the functionality of the device. config MFD_WM831X - tristate "Support Wolfson Microelectronics WM831x PMICs" + tristate "Support Wolfson Microelectronics WM831x/2x PMICs" select MFD_CORE depends on I2C help - Support for the Wolfson Microelecronics WM831x PMICs. This - driver provides common support for accessing the device, + Support for the Wolfson Microelecronics WM831x and WM832x PMICs. + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 8d386c0c8027..163029f06185 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -93,6 +93,7 @@ enum wm831x_parent { WM8310 = 0x8310, WM8311 = 0x8311, WM8312 = 0x8312, + WM8320 = 0x8320, }; static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg) @@ -478,6 +479,20 @@ static struct resource wm831x_dcdc4_resources[] = { }, }; +static struct resource wm8320_dcdc4_buck_resources[] = { + { + .start = WM831X_DC4_CONTROL, + .end = WM832X_DC4_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC4, + .end = WM831X_IRQ_UV_DC4, + .flags = IORESOURCE_IRQ, + }, +}; + static struct resource wm831x_gpio_resources[] = { { .start = WM831X_IRQ_GPIO_1, @@ -1237,6 +1252,137 @@ static struct mfd_cell wm8312_devs[] = { }, }; +static struct mfd_cell wm8320_devs[] = { + { + .name = "wm831x-backup", + }, + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-buckp", + .id = 4, + .num_resources = ARRAY_SIZE(wm8320_dcdc4_buck_resources), + .resources = wm8320_dcdc4_buck_resources, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-ldo", + .id = 6, + .num_resources = ARRAY_SIZE(wm831x_ldo6_resources), + .resources = wm831x_ldo6_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-aldo", + .id = 8, + .num_resources = ARRAY_SIZE(wm831x_ldo8_resources), + .resources = wm831x_ldo8_resources, + }, + { + .name = "wm831x-aldo", + .id = 9, + .num_resources = ARRAY_SIZE(wm831x_ldo9_resources), + .resources = wm831x_ldo9_resources, + }, + { + .name = "wm831x-aldo", + .id = 10, + .num_resources = ARRAY_SIZE(wm831x_ldo10_resources), + .resources = wm831x_ldo10_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + static struct mfd_cell backlight_devs[] = { { .name = "wm831x-backlight", @@ -1309,6 +1455,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) dev_info(wm831x->dev, "WM8312 revision %c\n", 'A' + rev); break; + case WM8320: + parent = WM8320; + wm831x->num_gpio = 12; + dev_info(wm831x->dev, "WM8320 revision %c\n", 'A' + rev); + break; + default: dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret); ret = -EINVAL; @@ -1367,6 +1519,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) NULL, 0); break; + case WM8320: + ret = mfd_add_devices(wm831x->dev, -1, + wm8320_devs, ARRAY_SIZE(wm8320_devs), + NULL, 0); + break; + default: /* If this happens the bus probe function is buggy */ BUG(); @@ -1492,6 +1650,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = { { "wm8310", WM8310 }, { "wm8311", WM8311 }, { "wm8312", WM8312 }, + { "wm8320", WM8320 }, { } }; MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id); diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index c1bc59f6cbf2..d01d293a6b25 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -117,6 +117,7 @@ #define WM831X_DC3_SLEEP_CONTROL 0x4063 #define WM831X_DC4_CONTROL 0x4064 #define WM831X_DC4_SLEEP_CONTROL 0x4065 +#define WM832X_DC4_SLEEP_CONTROL 0x4067 #define WM831X_EPE1_CONTROL 0x4066 #define WM831X_EPE2_CONTROL 0x4067 #define WM831X_LDO1_CONTROL 0x4068 -- cgit v1.2.3 From 15e0ff7a0c500c9f55a06c1ebefd43bce94d508b Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 12 Oct 2009 15:17:54 +0200 Subject: mfd: Fix 88PM8607 I2C dependency 88PM8607 depends on I2C and MFD_CORE. Since 88PM8607 is built-in kernel, it also requires that I2C and MFD_CORE are built-in kernel also. Signed-off-by: Haojian Zhuang Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b0b3e42e7ee6..7df3bcf79490 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -321,7 +321,7 @@ config EZX_PCAP config MFD_88PM8607 bool "Support Marvell 88PM8607" - depends on I2C + depends on I2C=y select MFD_CORE help This supports for Marvell 88PM8607 Power Management IC. This includes -- cgit v1.2.3 From a5736e0b62fcb7c1b20892c62e1c5fe5e9387c86 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 12 Oct 2009 17:22:38 +0200 Subject: mfd: Add ADP5520/ADP5501 driver Base driver for Analog Devices ADP5520/ADP5501 MFD PMICs Subdevs: LCD Backlight : drivers/video/backlight/adp5520_bl.c LEDs : drivers/led/leds-adp5520.c GPIO : drivers/gpio/adp5520-gpio.c (ADP5520 only) Keys : drivers/input/keyboard/adp5520-keys.c (ADP5520 only) Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 1 + drivers/mfd/adp5520.c | 378 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/adp5520.h | 299 +++++++++++++++++++++++++++++++++++ 4 files changed, 688 insertions(+) create mode 100644 drivers/mfd/adp5520.c create mode 100644 include/linux/mfd/adp5520.h (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 7df3bcf79490..b1d537053faf 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -174,6 +174,16 @@ config PMIC_DA903X individual components like LCD backlight, voltage regulators, LEDs and battery-charger under the corresponding menus. +config PMIC_ADP5520 + bool "Analog Devices ADP5520/01 MFD PMIC Core Support" + depends on I2C=y + help + Say yes here to add support for Analog Devices AD5520 and ADP5501, + Multifunction Power Management IC. This includes + the I2C driver and the core APIs _only_, you have to select + individual components like LCD backlight, LEDs, GPIOs and Kepad + under the corresponding menus. + config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 1792b1ff8ffc..24558574a737 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -54,3 +54,4 @@ obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o obj-$(CONFIG_AB4500_CORE) += ab4500-core.o obj-$(CONFIG_MFD_88PM8607) += 88pm8607.o +obj-$(CONFIG_PMIC_ADP5520) += adp5520.o \ No newline at end of file diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c new file mode 100644 index 000000000000..401a9b6029e3 --- /dev/null +++ b/drivers/mfd/adp5520.c @@ -0,0 +1,378 @@ +/* + * Base driver for Analog Devices ADP5520/ADP5501 MFD PMICs + * LCD Backlight: drivers/video/backlight/adp5520_bl + * LEDs : drivers/led/leds-adp5520 + * GPIO : drivers/gpio/adp5520-gpio (ADP5520 only) + * Keys : drivers/input/keyboard/adp5520-keys (ADP5520 only) + * + * Copyright 2009 Analog Devices Inc. + * + * Derived from da903x: + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +struct adp5520_chip { + struct i2c_client *client; + struct device *dev; + struct mutex lock; + struct blocking_notifier_head notifier_list; + int irq; + unsigned long id; +}; + +static int __adp5520_read(struct i2c_client *client, + int reg, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) { + dev_err(&client->dev, "failed reading at 0x%02x\n", reg); + return ret; + } + + *val = (uint8_t)ret; + return 0; +} + +static int __adp5520_write(struct i2c_client *client, + int reg, uint8_t val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret < 0) { + dev_err(&client->dev, "failed writing 0x%02x to 0x%02x\n", + val, reg); + return ret; + } + return 0; +} + +int __adp5520_ack_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp5520_chip *chip = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&chip->lock); + + ret = __adp5520_read(client, reg, ®_val); + + if (!ret) { + reg_val |= bit_mask; + ret = __adp5520_write(client, reg, reg_val); + } + + mutex_unlock(&chip->lock); + return ret; +} + +int adp5520_write(struct device *dev, int reg, uint8_t val) +{ + return __adp5520_write(to_i2c_client(dev), reg, val); +} +EXPORT_SYMBOL_GPL(adp5520_write); + +int adp5520_read(struct device *dev, int reg, uint8_t *val) +{ + return __adp5520_read(to_i2c_client(dev), reg, val); +} +EXPORT_SYMBOL_GPL(adp5520_read); + +int adp5520_set_bits(struct device *dev, int reg, uint8_t bit_mask) +{ + struct adp5520_chip *chip = dev_get_drvdata(dev); + uint8_t reg_val; + int ret; + + mutex_lock(&chip->lock); + + ret = __adp5520_read(chip->client, reg, ®_val); + + if (!ret && ((reg_val & bit_mask) == 0)) { + reg_val |= bit_mask; + ret = __adp5520_write(chip->client, reg, reg_val); + } + + mutex_unlock(&chip->lock); + return ret; +} +EXPORT_SYMBOL_GPL(adp5520_set_bits); + +int adp5520_clr_bits(struct device *dev, int reg, uint8_t bit_mask) +{ + struct adp5520_chip *chip = dev_get_drvdata(dev); + uint8_t reg_val; + int ret; + + mutex_lock(&chip->lock); + + ret = __adp5520_read(chip->client, reg, ®_val); + + if (!ret && (reg_val & bit_mask)) { + reg_val &= ~bit_mask; + ret = __adp5520_write(chip->client, reg, reg_val); + } + + mutex_unlock(&chip->lock); + return ret; +} +EXPORT_SYMBOL_GPL(adp5520_clr_bits); + +int adp5520_register_notifier(struct device *dev, struct notifier_block *nb, + unsigned int events) +{ + struct adp5520_chip *chip = dev_get_drvdata(dev); + + if (chip->irq) { + adp5520_set_bits(chip->dev, ADP5520_INTERRUPT_ENABLE, + events & (ADP5520_KP_IEN | ADP5520_KR_IEN | + ADP5520_OVP_IEN | ADP5520_CMPR_IEN)); + + return blocking_notifier_chain_register(&chip->notifier_list, + nb); + } + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(adp5520_register_notifier); + +int adp5520_unregister_notifier(struct device *dev, struct notifier_block *nb, + unsigned int events) +{ + struct adp5520_chip *chip = dev_get_drvdata(dev); + + adp5520_clr_bits(chip->dev, ADP5520_INTERRUPT_ENABLE, + events & (ADP5520_KP_IEN | ADP5520_KR_IEN | + ADP5520_OVP_IEN | ADP5520_CMPR_IEN)); + + return blocking_notifier_chain_unregister(&chip->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(adp5520_unregister_notifier); + +static irqreturn_t adp5520_irq_thread(int irq, void *data) +{ + struct adp5520_chip *chip = data; + unsigned int events; + uint8_t reg_val; + int ret; + + ret = __adp5520_read(chip->client, ADP5520_MODE_STATUS, ®_val); + if (ret) + goto out; + + events = reg_val & (ADP5520_OVP_INT | ADP5520_CMPR_INT | + ADP5520_GPI_INT | ADP5520_KR_INT | ADP5520_KP_INT); + + blocking_notifier_call_chain(&chip->notifier_list, events, NULL); + /* ACK, Sticky bits are W1C */ + __adp5520_ack_bits(chip->client, ADP5520_MODE_STATUS, events); + +out: + return IRQ_HANDLED; +} + +static int __remove_subdev(struct device *dev, void *unused) +{ + platform_device_unregister(to_platform_device(dev)); + return 0; +} + +static int adp5520_remove_subdevs(struct adp5520_chip *chip) +{ + return device_for_each_child(chip->dev, NULL, __remove_subdev); +} + +static int __devinit adp5520_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adp5520_platform_data *pdata = client->dev.platform_data; + struct platform_device *pdev; + struct adp5520_chip *chip; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Word Data not Supported\n"); + return -EIO; + } + + if (pdata == NULL) { + dev_err(&client->dev, "missing platform data\n"); + return -ENODEV; + } + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->client = client; + + chip->dev = &client->dev; + chip->irq = client->irq; + chip->id = id->driver_data; + mutex_init(&chip->lock); + + if (chip->irq) { + BLOCKING_INIT_NOTIFIER_HEAD(&chip->notifier_list); + + ret = request_threaded_irq(chip->irq, NULL, adp5520_irq_thread, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "adp5520", chip); + if (ret) { + dev_err(&client->dev, "failed to request irq %d\n", + chip->irq); + goto out_free_chip; + } + } + + ret = adp5520_write(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY); + if (ret) { + dev_err(&client->dev, "failed to write\n"); + goto out_free_irq; + } + + if (pdata->keys) { + pdev = platform_device_register_data(chip->dev, "adp5520-keys", + chip->id, pdata->keys, sizeof(*pdata->keys)); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + goto out_remove_subdevs; + } + } + + if (pdata->gpio) { + pdev = platform_device_register_data(chip->dev, "adp5520-gpio", + chip->id, pdata->gpio, sizeof(*pdata->gpio)); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + goto out_remove_subdevs; + } + } + + if (pdata->leds) { + pdev = platform_device_register_data(chip->dev, "adp5520-led", + chip->id, pdata->leds, sizeof(*pdata->leds)); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + goto out_remove_subdevs; + } + } + + if (pdata->backlight) { + pdev = platform_device_register_data(chip->dev, + "adp5520-backlight", + chip->id, + pdata->backlight, + sizeof(*pdata->backlight)); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + goto out_remove_subdevs; + } + } + + return 0; + +out_remove_subdevs: + adp5520_remove_subdevs(chip); + +out_free_irq: + if (chip->irq) + free_irq(chip->irq, chip); + +out_free_chip: + i2c_set_clientdata(client, NULL); + kfree(chip); + + return ret; +} + +static int __devexit adp5520_remove(struct i2c_client *client) +{ + struct adp5520_chip *chip = dev_get_drvdata(&client->dev); + + if (chip->irq) + free_irq(chip->irq, chip); + + adp5520_remove_subdevs(chip); + adp5520_write(chip->dev, ADP5520_MODE_STATUS, 0); + i2c_set_clientdata(client, NULL); + kfree(chip); + return 0; +} + +#ifdef CONFIG_PM +static int adp5520_suspend(struct i2c_client *client, + pm_message_t state) +{ + struct adp5520_chip *chip = dev_get_drvdata(&client->dev); + + adp5520_clr_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY); + return 0; +} + +static int adp5520_resume(struct i2c_client *client) +{ + struct adp5520_chip *chip = dev_get_drvdata(&client->dev); + + adp5520_set_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY); + return 0; +} +#else +#define adp5520_suspend NULL +#define adp5520_resume NULL +#endif + +static const struct i2c_device_id adp5520_id[] = { + { "pmic-adp5520", ID_ADP5520 }, + { "pmic-adp5501", ID_ADP5501 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp5520_id); + +static struct i2c_driver adp5520_driver = { + .driver = { + .name = "adp5520", + .owner = THIS_MODULE, + }, + .probe = adp5520_probe, + .remove = __devexit_p(adp5520_remove), + .suspend = adp5520_suspend, + .resume = adp5520_resume, + .id_table = adp5520_id, +}; + +static int __init adp5520_init(void) +{ + return i2c_add_driver(&adp5520_driver); +} +module_init(adp5520_init); + +static void __exit adp5520_exit(void) +{ + i2c_del_driver(&adp5520_driver); +} +module_exit(adp5520_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("ADP5520(01) PMIC-MFD Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/adp5520.h b/include/linux/mfd/adp5520.h new file mode 100644 index 000000000000..ac37558a4673 --- /dev/null +++ b/include/linux/mfd/adp5520.h @@ -0,0 +1,299 @@ +/* + * Definitions and platform data for Analog Devices + * ADP5520/ADP5501 MFD PMICs (Backlight, LED, GPIO and Keys) + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + + +#ifndef __LINUX_MFD_ADP5520_H +#define __LINUX_MFD_ADP5520_H + +#define ID_ADP5520 5520 +#define ID_ADP5501 5501 + +/* + * ADP5520/ADP5501 Register Map + */ + +#define ADP5520_MODE_STATUS 0x00 +#define ADP5520_INTERRUPT_ENABLE 0x01 +#define ADP5520_BL_CONTROL 0x02 +#define ADP5520_BL_TIME 0x03 +#define ADP5520_BL_FADE 0x04 +#define ADP5520_DAYLIGHT_MAX 0x05 +#define ADP5520_DAYLIGHT_DIM 0x06 +#define ADP5520_OFFICE_MAX 0x07 +#define ADP5520_OFFICE_DIM 0x08 +#define ADP5520_DARK_MAX 0x09 +#define ADP5520_DARK_DIM 0x0A +#define ADP5520_BL_VALUE 0x0B +#define ADP5520_ALS_CMPR_CFG 0x0C +#define ADP5520_L2_TRIP 0x0D +#define ADP5520_L2_HYS 0x0E +#define ADP5520_L3_TRIP 0x0F +#define ADP5520_L3_HYS 0x10 +#define ADP5520_LED_CONTROL 0x11 +#define ADP5520_LED_TIME 0x12 +#define ADP5520_LED_FADE 0x13 +#define ADP5520_LED1_CURRENT 0x14 +#define ADP5520_LED2_CURRENT 0x15 +#define ADP5520_LED3_CURRENT 0x16 + +/* + * ADP5520 Register Map + */ + +#define ADP5520_GPIO_CFG_1 0x17 +#define ADP5520_GPIO_CFG_2 0x18 +#define ADP5520_GPIO_IN 0x19 +#define ADP5520_GPIO_OUT 0x1A +#define ADP5520_GPIO_INT_EN 0x1B +#define ADP5520_GPIO_INT_STAT 0x1C +#define ADP5520_GPIO_INT_LVL 0x1D +#define ADP5520_GPIO_DEBOUNCE 0x1E +#define ADP5520_GPIO_PULLUP 0x1F +#define ADP5520_KP_INT_STAT_1 0x20 +#define ADP5520_KP_INT_STAT_2 0x21 +#define ADP5520_KR_INT_STAT_1 0x22 +#define ADP5520_KR_INT_STAT_2 0x23 +#define ADP5520_KEY_STAT_1 0x24 +#define ADP5520_KEY_STAT_2 0x25 + +/* + * MODE_STATUS bits + */ + +#define ADP5520_nSTNBY (1 << 7) +#define ADP5520_BL_EN (1 << 6) +#define ADP5520_DIM_EN (1 << 5) +#define ADP5520_OVP_INT (1 << 4) +#define ADP5520_CMPR_INT (1 << 3) +#define ADP5520_GPI_INT (1 << 2) +#define ADP5520_KR_INT (1 << 1) +#define ADP5520_KP_INT (1 << 0) + +/* + * INTERRUPT_ENABLE bits + */ + +#define ADP5520_AUTO_LD_EN (1 << 4) +#define ADP5520_CMPR_IEN (1 << 3) +#define ADP5520_OVP_IEN (1 << 2) +#define ADP5520_KR_IEN (1 << 1) +#define ADP5520_KP_IEN (1 << 0) + +/* + * BL_CONTROL bits + */ + +#define ADP5520_BL_LVL ((x) << 5) +#define ADP5520_BL_LAW ((x) << 4) +#define ADP5520_BL_AUTO_ADJ (1 << 3) +#define ADP5520_OVP_EN (1 << 2) +#define ADP5520_FOVR (1 << 1) +#define ADP5520_KP_BL_EN (1 << 0) + +/* + * ALS_CMPR_CFG bits + */ + +#define ADP5520_L3_OUT (1 << 3) +#define ADP5520_L2_OUT (1 << 2) +#define ADP5520_L3_EN (1 << 1) + +#define ADP5020_MAX_BRIGHTNESS 0x7F + +#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4)) +#define BL_CTRL_VAL(law, auto) (((1 & (auto)) << 3) | ((0x3 & (law)) << 4)) +#define ALS_CMPR_CFG_VAL(filt, l3_en) (((0x7 & filt) << 5) | l3_en) + +/* + * LEDs subdevice bits and masks + */ + +#define ADP5520_01_MAXLEDS 3 + +#define ADP5520_FLAG_LED_MASK 0x3 +#define ADP5520_FLAG_OFFT_SHIFT 8 +#define ADP5520_FLAG_OFFT_MASK 0x3 + +#define ADP5520_R3_MODE (1 << 5) +#define ADP5520_C3_MODE (1 << 4) +#define ADP5520_LED_LAW (1 << 3) +#define ADP5520_LED3_EN (1 << 2) +#define ADP5520_LED2_EN (1 << 1) +#define ADP5520_LED1_EN (1 << 0) + +/* + * GPIO subdevice bits and masks + */ + +#define ADP5520_MAXGPIOS 8 + +#define ADP5520_GPIO_C3 (1 << 7) /* LED2 or GPIO7 aka C3 */ +#define ADP5520_GPIO_C2 (1 << 6) +#define ADP5520_GPIO_C1 (1 << 5) +#define ADP5520_GPIO_C0 (1 << 4) +#define ADP5520_GPIO_R3 (1 << 3) /* LED3 or GPIO3 aka R3 */ +#define ADP5520_GPIO_R2 (1 << 2) +#define ADP5520_GPIO_R1 (1 << 1) +#define ADP5520_GPIO_R0 (1 << 0) + +struct adp5520_gpio_platform_data { + unsigned gpio_start; + u8 gpio_en_mask; + u8 gpio_pullup_mask; +}; + +/* + * Keypad subdevice bits and masks + */ + +#define ADP5520_MAXKEYS 16 + +#define ADP5520_COL_C3 (1 << 7) /* LED2 or GPIO7 aka C3 */ +#define ADP5520_COL_C2 (1 << 6) +#define ADP5520_COL_C1 (1 << 5) +#define ADP5520_COL_C0 (1 << 4) +#define ADP5520_ROW_R3 (1 << 3) /* LED3 or GPIO3 aka R3 */ +#define ADP5520_ROW_R2 (1 << 2) +#define ADP5520_ROW_R1 (1 << 1) +#define ADP5520_ROW_R0 (1 << 0) + +#define ADP5520_KEY(row, col) (col + row * 4) +#define ADP5520_KEYMAPSIZE ADP5520_MAXKEYS + +struct adp5520_keys_platform_data { + int rows_en_mask; /* Number of rows */ + int cols_en_mask; /* Number of columns */ + const unsigned short *keymap; /* Pointer to keymap */ + unsigned short keymapsize; /* Keymap size */ + unsigned repeat:1; /* Enable key repeat */ +}; + + +/* + * LEDs subdevice platform data + */ + +#define FLAG_ID_ADP5520_LED1_ADP5501_LED0 1 /* ADP5520 PIN ILED */ +#define FLAG_ID_ADP5520_LED2_ADP5501_LED1 2 /* ADP5520 PIN C3 */ +#define FLAG_ID_ADP5520_LED3_ADP5501_LED2 3 /* ADP5520 PIN R3 */ + +#define ADP5520_LED_DIS_BLINK (0 << ADP5520_FLAG_OFFT_SHIFT) +#define ADP5520_LED_OFFT_600ms (1 << ADP5520_FLAG_OFFT_SHIFT) +#define ADP5520_LED_OFFT_800ms (2 << ADP5520_FLAG_OFFT_SHIFT) +#define ADP5520_LED_OFFT_1200ms (3 << ADP5520_FLAG_OFFT_SHIFT) + +#define ADP5520_LED_ONT_200ms 0 +#define ADP5520_LED_ONT_600ms 1 +#define ADP5520_LED_ONT_800ms 2 +#define ADP5520_LED_ONT_1200ms 3 + +struct adp5520_leds_platform_data { + int num_leds; + struct led_info *leds; + u8 fade_in; /* Backlight Fade-In Timer */ + u8 fade_out; /* Backlight Fade-Out Timer */ + u8 led_on_time; +}; + +/* + * Backlight subdevice platform data + */ + +#define ADP5520_FADE_T_DIS 0 /* Fade Timer Disabled */ +#define ADP5520_FADE_T_300ms 1 /* 0.3 Sec */ +#define ADP5520_FADE_T_600ms 2 +#define ADP5520_FADE_T_900ms 3 +#define ADP5520_FADE_T_1200ms 4 +#define ADP5520_FADE_T_1500ms 5 +#define ADP5520_FADE_T_1800ms 6 +#define ADP5520_FADE_T_2100ms 7 +#define ADP5520_FADE_T_2400ms 8 +#define ADP5520_FADE_T_2700ms 9 +#define ADP5520_FADE_T_3000ms 10 +#define ADP5520_FADE_T_3500ms 11 +#define ADP5520_FADE_T_4000ms 12 +#define ADP5520_FADE_T_4500ms 13 +#define ADP5520_FADE_T_5000ms 14 +#define ADP5520_FADE_T_5500ms 15 /* 5.5 Sec */ + +#define ADP5520_BL_LAW_LINEAR 0 +#define ADP5520_BL_LAW_SQUARE 1 +#define ADP5520_BL_LAW_CUBIC1 2 +#define ADP5520_BL_LAW_CUBIC2 3 + +#define ADP5520_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ +#define ADP5520_BL_AMBL_FILT_160ms 1 +#define ADP5520_BL_AMBL_FILT_320ms 2 +#define ADP5520_BL_AMBL_FILT_640ms 3 +#define ADP5520_BL_AMBL_FILT_1280ms 4 +#define ADP5520_BL_AMBL_FILT_2560ms 5 +#define ADP5520_BL_AMBL_FILT_5120ms 6 +#define ADP5520_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ + + /* + * Blacklight current 0..30mA + */ +#define ADP5520_BL_CUR_mA(I) ((I * 127) / 30) + + /* + * L2 comparator current 0..1000uA + */ +#define ADP5520_L2_COMP_CURR_uA(I) ((I * 255) / 1000) + + /* + * L3 comparator current 0..127uA + */ +#define ADP5520_L3_COMP_CURR_uA(I) ((I * 255) / 127) + +struct adp5520_backlight_platform_data { + u8 fade_in; /* Backlight Fade-In Timer */ + u8 fade_out; /* Backlight Fade-Out Timer */ + u8 fade_led_law; /* fade-on/fade-off transfer characteristic */ + + u8 en_ambl_sens; /* 1 = enable ambient light sensor */ + u8 abml_filt; /* Light sensor filter time */ + u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1000 uA */ + u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1000 uA */ + u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 127 uA */ + u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 127 uA */ +}; + +/* + * MFD chip platform data + */ + +struct adp5520_platform_data { + struct adp5520_keys_platform_data *keys; + struct adp5520_gpio_platform_data *gpio; + struct adp5520_leds_platform_data *leds; + struct adp5520_backlight_platform_data *backlight; +}; + +/* + * MFD chip functions + */ + +extern int adp5520_read(struct device *dev, int reg, uint8_t *val); +extern int adp5520_write(struct device *dev, int reg, u8 val); +extern int adp5520_clr_bits(struct device *dev, int reg, uint8_t bit_mask); +extern int adp5520_set_bits(struct device *dev, int reg, uint8_t bit_mask); + +extern int adp5520_register_notifier(struct device *dev, + struct notifier_block *nb, unsigned int events); + +extern int adp5520_unregister_notifier(struct device *dev, + struct notifier_block *nb, unsigned int events); + +#endif /* __LINUX_MFD_ADP5520_H */ -- cgit v1.2.3 From ecba96e6966174ccee47255c98b2091a739e1e45 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Nov 2009 21:44:27 +0100 Subject: mfd: Remove default selection of AB4500 This remove the default 'y' selection of AB4500, currently everyone enabling the SPI subsystem will get a copy of this driver. Signed-off-by: Linus Walleij Cc: Srinidhi Kasagar Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b1d537053faf..b46b11b2ad72 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -342,7 +342,6 @@ config MFD_88PM8607 config AB4500_CORE tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" depends on SPI - default y help Select this option to enable access to AB4500 power management chip. This connects to U8500 on the SSP/SPI bus and exports -- cgit v1.2.3 From 6e40173de9aec91f8de84beabbc51061c086b744 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 23 Nov 2009 13:42:34 +0000 Subject: mfd: Don't allow wm831x to be built as a module The genirq infrastructure functions aren't currently exported, preventing modular builds. Reported-by: Stephen Rothwell Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b46b11b2ad72..4502bcb91385 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -195,7 +195,7 @@ config MFD_WM8400 the functionality of the device. config MFD_WM831X - tristate "Support Wolfson Microelectronics WM831x/2x PMICs" + bool "Support Wolfson Microelectronics WM831x/2x PMICs" select MFD_CORE depends on I2C help -- cgit v1.2.3 From 01253503822868faa48973f680a921985388352b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 24 Nov 2009 10:48:56 +0000 Subject: mfd: Force I2C to be built in when building WM831x This works around issues with allmodconfig where it won't propagate the dependency from the WM831x core back to the I2C and MFD cores. When doing allmodconfig this causes WM831x to be omitted and ensures that in normal builds the dependencies get shaken out. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 4502bcb91385..b23343cdc196 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -197,7 +197,7 @@ config MFD_WM8400 config MFD_WM831X bool "Support Wolfson Microelectronics WM831x/2x PMICs" select MFD_CORE - depends on I2C + depends on I2C=y help Support for the Wolfson Microelecronics WM831x and WM832x PMICs. This driver provides common support for accessing the device, -- cgit v1.2.3 From e8deb28ca8e221de0239eafb3c3d431d8854278e Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 14 Dec 2009 00:25:31 +0100 Subject: mfd: Add support for twl6030 irq framework This patch adds support for phoenix interrupt framework. New iInterrupt status register A, B, C are introduced in Phoenix and are cleared on write. Due to the differences in interrupt handling with respect to TWL4030, twl6030-irq.c is created for TWL6030 PMIC Signed-off-by: Rajendra Nayak Signed-off-by: Balaji T K Signed-off-by: Santosh Shilimkar Reviewed-by: Tony Lindgren Signed-off-by: Samuel Ortiz --- arch/arm/plat-omap/include/plat/irqs.h | 16 +- drivers/mfd/Kconfig | 4 +- drivers/mfd/Makefile | 2 +- drivers/mfd/twl-core.c | 120 +++++++++++-- drivers/mfd/twl4030-irq.c | 6 +- drivers/mfd/twl6030-irq.c | 299 +++++++++++++++++++++++++++++++++ include/linux/i2c/twl.h | 64 +++++++ 7 files changed, 490 insertions(+), 21 deletions(-) create mode 100644 drivers/mfd/twl6030-irq.c (limited to 'drivers/mfd/Kconfig') diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index ce5dd2d1dc21..97d6c50c3dcb 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -472,8 +472,22 @@ #endif #define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) +#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END) +#ifdef CONFIG_TWL4030_CORE +#define TWL6030_BASE_NR_IRQS 20 +#else +#define TWL6030_BASE_NR_IRQS 0 +#endif +#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) + /* Total number of interrupts depends on the enabled blocks above */ -#define NR_IRQS TWL4030_GPIO_IRQ_END +#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END) +#define TWL_IRQ_END TWL4030_GPIO_IRQ_END +#else +#define TWL_IRQ_END TWL6030_IRQ_END +#endif + +#define NR_IRQS TWL_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b23343cdc196..87829789243e 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -103,10 +103,10 @@ config MENELAUS cell phones and PDAs. config TWL4030_CORE - bool "Texas Instruments TWL4030/TPS659x0 Support" + bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" depends on I2C=y && GENERIC_HARDIRQS help - Say yes here if you have TWL4030 family chip on your board. + Say yes here if you have TWL4030 / TWL6030 family chip on your board. This core driver provides register access and IRQ handling facilities, and registers devices for the various functions so that function-specific drivers can bind to them. diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index f4d14b7589bf..ca2f2c4ff05e 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o -obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o +obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 79946fe800af..c48a6138c575 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -181,6 +181,30 @@ /* Triton Core internal information (END) */ +/* subchip/slave 0 0x48 - POWER */ +#define TWL6030_BASEADD_RTC 0x0000 +#define TWL6030_BASEADD_MEM 0x0017 +#define TWL6030_BASEADD_PM_MASTER 0x001F +#define TWL6030_BASEADD_PM_SLAVE_MISC 0x0030 /* PM_RECEIVER */ +#define TWL6030_BASEADD_PM_MISC 0x00E2 +#define TWL6030_BASEADD_PM_PUPD 0x00F0 + +/* subchip/slave 1 0x49 - FEATURE */ +#define TWL6030_BASEADD_USB 0x0000 +#define TWL6030_BASEADD_GPADC_CTRL 0x002E +#define TWL6030_BASEADD_AUX 0x0090 +#define TWL6030_BASEADD_PWM 0x00BA +#define TWL6030_BASEADD_GASGAUGE 0x00C0 +#define TWL6030_BASEADD_PIH 0x00D0 +#define TWL6030_BASEADD_CHARGER 0x00E0 + +/* subchip/slave 2 0x4A - DFT */ +#define TWL6030_BASEADD_DIEID 0x00C0 + +/* subchip/slave 3 0x4B - AUDIO */ +#define TWL6030_BASEADD_AUDIO 0x0000 +#define TWL6030_BASEADD_RSV 0x0000 + /* Few power values */ #define R_CFG_BOOT 0x05 #define R_PROTECT_KEY 0x0E @@ -202,13 +226,21 @@ #define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */ #define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */ #define TWL5031 BIT(2) /* twl5031 has different registers */ +#define TWL6030_CLASS BIT(3) /* TWL6030 class */ /*----------------------------------------------------------------------*/ /* is driver active, bound to a chip? */ static bool inuse; -/* Structure for each TWL4030 Slave */ +static unsigned int twl_id; +unsigned int twl_rev(void) +{ + return twl_id; +} +EXPORT_SYMBOL(twl_rev); + +/* Structure for each TWL4030/TWL6030 Slave */ struct twl_client { struct i2c_client *client; u8 address; @@ -228,11 +260,12 @@ struct twl_mapping { unsigned char sid; /* Slave ID */ unsigned char base; /* base address */ }; +struct twl_mapping *twl_map; static struct twl_mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { /* * NOTE: don't change this table without updating the - * defines for TWL4030_MODULE_* + * defines for TWL4030_MODULE_* * so they continue to match the order in this table. */ @@ -265,6 +298,40 @@ static struct twl_mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { { 3, TWL4030_BASEADD_SECURED_REG }, }; +static struct twl_mapping twl6030_map[] = { + /* + * NOTE: don't change this table without updating the + * defines for TWL4030_MODULE_* + * so they continue to match the order in this table. + */ + { SUB_CHIP_ID1, TWL6030_BASEADD_USB }, + { SUB_CHIP_ID3, TWL6030_BASEADD_AUDIO }, + { SUB_CHIP_ID2, TWL6030_BASEADD_DIEID }, + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + { SUB_CHIP_ID1, TWL6030_BASEADD_PIH }, + + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + { SUB_CHIP_ID1, TWL6030_BASEADD_GPADC_CTRL }, + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + + { SUB_CHIP_ID1, TWL6030_BASEADD_CHARGER }, + { SUB_CHIP_ID1, TWL6030_BASEADD_GASGAUGE }, + { SUB_CHIP_ID1, TWL6030_BASEADD_PWM }, + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, + { SUB_CHIP_ID0, TWL6030_BASEADD_PM_MASTER }, + { SUB_CHIP_ID0, TWL6030_BASEADD_PM_SLAVE_MISC }, + + { SUB_CHIP_ID0, TWL6030_BASEADD_RTC }, + { SUB_CHIP_ID0, TWL6030_BASEADD_MEM }, +}; + /*----------------------------------------------------------------------*/ /* Exported Functions */ @@ -292,7 +359,7 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } - sid = twl4030_map[mod_no].sid; + sid = twl_map[mod_no].sid; twl = &twl_modules[sid]; if (unlikely(!inuse)) { @@ -310,7 +377,7 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) msg->flags = 0; msg->buf = value; /* over write the first byte of buffer with the register address */ - *value = twl4030_map[mod_no].base + reg; + *value = twl_map[mod_no].base + reg; ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1); mutex_unlock(&twl->xfer_lock); @@ -349,7 +416,7 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } - sid = twl4030_map[mod_no].sid; + sid = twl_map[mod_no].sid; twl = &twl_modules[sid]; if (unlikely(!inuse)) { @@ -362,7 +429,7 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) msg->addr = twl->address; msg->len = 1; msg->flags = 0; /* Read the register value */ - val = twl4030_map[mod_no].base + reg; + val = twl_map[mod_no].base + reg; msg->buf = &val; /* [MSG2] fill the data rx buffer */ msg = &twl->xfer_msg[1]; @@ -486,6 +553,7 @@ add_regulator_linked(int num, struct regulator_init_data *pdata, struct regulator_consumer_supply *consumers, unsigned num_consumers) { + unsigned sub_chip_id; /* regulator framework demands init_data ... */ if (!pdata) return NULL; @@ -496,7 +564,8 @@ add_regulator_linked(int num, struct regulator_init_data *pdata, } /* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */ - return add_numbered_child(3, "twl_reg", num, + sub_chip_id = twl_map[TWL_MODULE_PM_MASTER].sid; + return add_numbered_child(sub_chip_id, "twl_reg", num, pdata, sizeof(*pdata), false, 0, 0); } @@ -516,6 +585,7 @@ static int add_children(struct twl4030_platform_data *pdata, unsigned long features) { struct device *child; + unsigned sub_chip_id; if (twl_has_bci() && pdata->bci && !(features & (TPS_SUBSET | TWL5031))) { @@ -561,7 +631,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) * Eventually, Linux might become more aware of such * HW security concerns, and "least privilege". */ - child = add_child(3, "twl_rtc", + sub_chip_id = twl_map[TWL_MODULE_RTC].sid; + child = add_child(sub_chip_id, "twl_rtc", NULL, 0, true, pdata->irq_base + RTC_INTR_OFFSET, 0); if (IS_ERR(child)) @@ -812,16 +883,22 @@ static void clocks_init(struct device *dev, /*----------------------------------------------------------------------*/ -int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); -int twl_exit_irq(void); -int twl_init_chip_irq(const char *chip); +int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +int twl4030_exit_irq(void); +int twl4030_init_chip_irq(const char *chip); +int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +int twl6030_exit_irq(void); static int twl_remove(struct i2c_client *client) { unsigned i; int status; - status = twl_exit_irq(); + if (twl_class_is_4030()) + status = twl4030_exit_irq(); + else + status = twl6030_exit_irq(); + if (status < 0) return status; @@ -878,6 +955,13 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) mutex_init(&twl->xfer_lock); } inuse = true; + if ((id->driver_data) & TWL6030_CLASS) { + twl_id = TWL6030_CLASS_ID; + twl_map = &twl6030_map[0]; + } else { + twl_id = TWL4030_CLASS_ID; + twl_map = &twl4030_map[0]; + } /* setup clock framework */ clocks_init(&client->dev, pdata->clock); @@ -890,8 +974,15 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) if (client->irq && pdata->irq_base && pdata->irq_end > pdata->irq_base) { - twl_init_chip_irq(id->name); - status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); + if (twl_class_is_4030()) { + twl4030_init_chip_irq(id->name); + status = twl4030_init_irq(client->irq, pdata->irq_base, + pdata->irq_end); + } else { + status = twl6030_init_irq(client->irq, pdata->irq_base, + pdata->irq_end); + } + if (status < 0) goto fail; } @@ -910,6 +1001,7 @@ static const struct i2c_device_id twl_ids[] = { { "tps65950", 0 }, /* catalog version of twl5030 */ { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */ { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ + { "twl6030", TWL6030_CLASS }, /* "Phoenix power chip" */ { /* end of list */ }, }; MODULE_DEVICE_TABLE(i2c, twl_ids); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 5a62cf916987..20d29bafc9f5 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -778,7 +778,7 @@ int twl4030_sih_setup(int module) /* FIXME pass in which interrupt line we'll use ... */ #define twl_irq_line 0 -int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) { static struct irq_chip twl4030_irq_chip; @@ -858,7 +858,7 @@ fail: return status; } -int twl_exit_irq(void) +int twl4030_exit_irq(void) { /* FIXME undo twl_init_irq() */ if (twl4030_irq_base) { @@ -868,7 +868,7 @@ int twl_exit_irq(void) return 0; } -int twl_init_chip_irq(const char *chip) +int twl4030_init_chip_irq(const char *chip) { if (!strcmp(chip, "twl5031")) { sih_modules = sih_modules_twl5031; diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c new file mode 100644 index 000000000000..10bf228ad626 --- /dev/null +++ b/drivers/mfd/twl6030-irq.c @@ -0,0 +1,299 @@ +/* + * twl6030-irq.c - TWL6030 irq support + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * + * Modifications to defer interrupt handling to a kernel thread: + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn + * + * Code cleanup and modifications to IRQ handler. + * by syed khasim + * + * TWL6030 specific code and IRQ handling changes by + * Jagadeesh Bhaskar Pakaravoor + * Balaji T K + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +/* + * TWL6030 (unlike its predecessors, which had two level interrupt handling) + * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C. + * It exposes status bits saying who has raised an interrupt. There are + * three mask registers that corresponds to these status registers, that + * enables/disables these interrupts. + * + * We set up IRQs starting at a platform-specified base. An interrupt map table, + * specifies mapping between interrupt number and the associated module. + * + */ + +static int twl6030_interrupt_mapping[24] = { + PWR_INTR_OFFSET, /* Bit 0 PWRON */ + PWR_INTR_OFFSET, /* Bit 1 RPWRON */ + PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */ + RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */ + RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */ + HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */ + SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */ + SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */ + + SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */ + BATDETECT_INTR_OFFSET, /* Bit 9 BAT */ + SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */ + MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */ + RSV_INTR_OFFSET, /* Bit 12 Reserved */ + MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */ + MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */ + GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */ + + USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */ + USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */ + USBOTG_INTR_OFFSET, /* Bit 18 ID */ + USBOTG_INTR_OFFSET, /* Bit 19 VBUS */ + CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */ + CHARGER_INTR_OFFSET, /* Bit 21 EXT_CHRG */ + CHARGER_INTR_OFFSET, /* Bit 22 INT_CHRG */ + RSV_INTR_OFFSET, /* Bit 23 Reserved */ +}; +/*----------------------------------------------------------------------*/ + +static unsigned twl6030_irq_base; + +static struct completion irq_event; + +/* + * This thread processes interrupts reported by the Primary Interrupt Handler. + */ +static int twl6030_irq_thread(void *data) +{ + long irq = (long)data; + static unsigned i2c_errors; + static const unsigned max_i2c_errors = 100; + int ret; + + current->flags |= PF_NOFREEZE; + + while (!kthread_should_stop()) { + int i; + union { + u8 bytes[4]; + u32 int_sts; + } sts; + + /* Wait for IRQ, then read PIH irq status (also blocking) */ + wait_for_completion_interruptible(&irq_event); + + /* read INT_STS_A, B and C in one shot using a burst read */ + ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, + REG_INT_STS_A, 3); + if (ret) { + pr_warning("twl6030: I2C error %d reading PIH ISR\n", + ret); + if (++i2c_errors >= max_i2c_errors) { + printk(KERN_ERR "Maximum I2C error count" + " exceeded. Terminating %s.\n", + __func__); + break; + } + complete(&irq_event); + continue; + } + + + + sts.bytes[3] = 0; /* Only 24 bits are valid*/ + + for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++) { + local_irq_disable(); + if (sts.int_sts & 0x1) { + int module_irq = twl6030_irq_base + + twl6030_interrupt_mapping[i]; + struct irq_desc *d = irq_to_desc(module_irq); + + if (!d) { + pr_err("twl6030: Invalid SIH IRQ: %d\n", + module_irq); + return -EINVAL; + } + + /* These can't be masked ... always warn + * if we get any surprises. + */ + if (d->status & IRQ_DISABLED) + note_interrupt(module_irq, d, + IRQ_NONE); + else + d->handle_irq(module_irq, d); + + } + local_irq_enable(); + } + ret = twl_i2c_write(TWL_MODULE_PIH, sts.bytes, + REG_INT_STS_A, 3); /* clear INT_STS_A */ + if (ret) + pr_warning("twl6030: I2C error in clearing PIH ISR\n"); + + enable_irq(irq); + } + + return 0; +} + +/* + * handle_twl6030_int() is the desc->handle method for the twl6030 interrupt. + * This is a chained interrupt, so there is no desc->action method for it. + * Now we need to query the interrupt controller in the twl6030 to determine + * which module is generating the interrupt request. However, we can't do i2c + * transactions in interrupt context, so we must defer that work to a kernel + * thread. All we do here is acknowledge and mask the interrupt and wakeup + * the kernel thread. + */ +static irqreturn_t handle_twl6030_pih(int irq, void *devid) +{ + disable_irq_nosync(irq); + complete(devid); + return IRQ_HANDLED; +} + +/*----------------------------------------------------------------------*/ + +static inline void activate_irq(int irq) +{ +#ifdef CONFIG_ARM + /* ARM requires an extra step to clear IRQ_NOREQUEST, which it + * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. + */ + set_irq_flags(irq, IRQF_VALID); +#else + /* same effect on other architectures */ + set_irq_noprobe(irq); +#endif +} + +/*----------------------------------------------------------------------*/ + +static unsigned twl6030_irq_next; + +/*----------------------------------------------------------------------*/ +int twl6030_interrupt_unmask(u8 bit_mask, u8 offset) +{ + int ret; + u8 unmask_value; + ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value, + REG_INT_STS_A + offset); + unmask_value &= (~(bit_mask)); + ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value, + REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */ + return ret; +} +EXPORT_SYMBOL(twl6030_interrupt_unmask); + +int twl6030_interrupt_mask(u8 bit_mask, u8 offset) +{ + int ret; + u8 mask_value; + ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value, + REG_INT_STS_A + offset); + mask_value |= (bit_mask); + ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value, + REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */ + return ret; +} +EXPORT_SYMBOL(twl6030_interrupt_mask); + +int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +{ + + int status = 0; + int i; + struct task_struct *task; + int ret; + u8 mask[4]; + + static struct irq_chip twl6030_irq_chip; + mask[1] = 0xFF; + mask[2] = 0xFF; + mask[3] = 0xFF; + ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], + REG_INT_MSK_LINE_A, 3); /* MASK ALL INT LINES */ + ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], + REG_INT_MSK_STS_A, 3); /* MASK ALL INT STS */ + ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], + REG_INT_STS_A, 3); /* clear INT_STS_A,B,C */ + + twl6030_irq_base = irq_base; + + /* install an irq handler for each of the modules; + * clone dummy irq_chip since PIH can't *do* anything + */ + twl6030_irq_chip = dummy_irq_chip; + twl6030_irq_chip.name = "twl6030"; + twl6030_irq_chip.set_type = NULL; + + for (i = irq_base; i < irq_end; i++) { + set_irq_chip_and_handler(i, &twl6030_irq_chip, + handle_simple_irq); + activate_irq(i); + } + + twl6030_irq_next = i; + pr_info("twl6030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", + irq_num, irq_base, twl6030_irq_next - 1); + + /* install an irq handler to demultiplex the TWL6030 interrupt */ + init_completion(&irq_event); + task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq"); + if (IS_ERR(task)) { + pr_err("twl6030: could not create irq %d thread!\n", irq_num); + status = PTR_ERR(task); + goto fail_kthread; + } + + status = request_irq(irq_num, handle_twl6030_pih, IRQF_DISABLED, + "TWL6030-PIH", &irq_event); + if (status < 0) { + pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status); + goto fail_irq; + } + return status; +fail_irq: + free_irq(irq_num, &irq_event); + +fail_kthread: + for (i = irq_base; i < irq_end; i++) + set_irq_chip_and_handler(i, NULL, NULL); + return status; +} + +int twl6030_exit_irq(void) +{ + + if (twl6030_irq_base) { + pr_err("twl6030: can't yet clean up IRQs?\n"); + return -ENOSYS; + } + return 0; +} + diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 0f812f5aa723..8e7405d9c624 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -89,6 +89,67 @@ #define BCI_PRES_INTR_OFFSET 9 #define USB_PRES_INTR_OFFSET 10 #define RTC_INTR_OFFSET 11 + +/* + * Offset from TWL6030_IRQ_BASE / pdata->irq_base + */ +#define PWR_INTR_OFFSET 0 +#define HOTDIE_INTR_OFFSET 12 +#define SMPSLDO_INTR_OFFSET 13 +#define BATDETECT_INTR_OFFSET 14 +#define SIMDETECT_INTR_OFFSET 15 +#define MMCDETECT_INTR_OFFSET 16 +#define GASGAUGE_INTR_OFFSET 17 +#define USBOTG_INTR_OFFSET 4 +#define CHARGER_INTR_OFFSET 2 +#define RSV_INTR_OFFSET 0 + +/* INT register offsets */ +#define REG_INT_STS_A 0x00 +#define REG_INT_STS_B 0x01 +#define REG_INT_STS_C 0x02 + +#define REG_INT_MSK_LINE_A 0x03 +#define REG_INT_MSK_LINE_B 0x04 +#define REG_INT_MSK_LINE_C 0x05 + +#define REG_INT_MSK_STS_A 0x06 +#define REG_INT_MSK_STS_B 0x07 +#define REG_INT_MSK_STS_C 0x08 + +/* MASK INT REG GROUP A */ +#define TWL6030_PWR_INT_MASK 0x07 +#define TWL6030_RTC_INT_MASK 0x18 +#define TWL6030_HOTDIE_INT_MASK 0x20 +#define TWL6030_SMPSLDOA_INT_MASK 0xC0 + +/* MASK INT REG GROUP B */ +#define TWL6030_SMPSLDOB_INT_MASK 0x01 +#define TWL6030_BATDETECT_INT_MASK 0x02 +#define TWL6030_SIMDETECT_INT_MASK 0x04 +#define TWL6030_MMCDETECT_INT_MASK 0x08 +#define TWL6030_GPADC_INT_MASK 0x60 +#define TWL6030_GASGAUGE_INT_MASK 0x80 + +/* MASK INT REG GROUP C */ +#define TWL6030_USBOTG_INT_MASK 0x0F +#define TWL6030_CHARGER_CTRL_INT_MASK 0x10 +#define TWL6030_CHARGER_FAULT_INT_MASK 0x60 + + +#define TWL4030_CLASS_ID 0x4030 +#define TWL6030_CLASS_ID 0x6030 +unsigned int twl_rev(void); +#define GET_TWL_REV (twl_rev()) +#define TWL_CLASS_IS(class, id) \ +static inline int twl_class_is_ ##class(void) \ +{ \ + return ((id) == (GET_TWL_REV)) ? 1 : 0; \ +} + +TWL_CLASS_IS(4030, TWL4030_CLASS_ID) +TWL_CLASS_IS(6030, TWL6030_CLASS_ID) + /* * Read and write single 8-bit registers */ @@ -104,6 +165,9 @@ int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl6030_interrupt_unmask(u8 bit_mask, u8 offset); +int twl6030_interrupt_mask(u8 bit_mask, u8 offset); + /*----------------------------------------------------------------------*/ /* -- cgit v1.2.3