From 56cb3cc1872923b69fdeeb00362b7da4d6cf5590 Mon Sep 17 00:00:00 2001 From: Micky Ching Date: Wed, 18 Dec 2013 10:03:13 +0800 Subject: mfd: rtsx: Add support for card reader rtl8402 rtl8402 is much like rtl8411, so just add it to rtl8411.c Signed-off-by: Micky Ching Reviewed-by: Dan Carpenter Signed-off-by: Lee Jones --- drivers/mfd/rtl8411.c | 44 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 4 deletions(-) (limited to 'drivers/mfd/rtl8411.c') diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c index 327c8894fd4a..ada38ad54e87 100644 --- a/drivers/mfd/rtl8411.c +++ b/drivers/mfd/rtl8411.c @@ -191,24 +191,25 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card) BPP_LDO_POWB, BPP_LDO_SUSPEND); } -static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +static int rtl8411_do_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage, + int bpp_tuned18_shift, int bpp_asic_1v8) { u8 mask, val; int err; - mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK; + mask = (BPP_REG_TUNED18 << bpp_tuned18_shift) | BPP_PAD_MASK; if (voltage == OUTPUT_3V3) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3); if (err < 0) return err; - val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3; + val = (BPP_ASIC_3V3 << bpp_tuned18_shift) | BPP_PAD_3V3; } else if (voltage == OUTPUT_1V8) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8); if (err < 0) return err; - val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8; + val = (bpp_asic_1v8 << bpp_tuned18_shift) | BPP_PAD_1V8; } else { return -EINVAL; } @@ -216,6 +217,18 @@ static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) return rtsx_pci_write_register(pcr, LDO_CTL, mask, val); } +static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + return rtl8411_do_switch_output_voltage(pcr, voltage, + BPP_TUNED18_SHIFT_8411, BPP_ASIC_1V8); +} + +static int rtl8402_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + return rtl8411_do_switch_output_voltage(pcr, voltage, + BPP_TUNED18_SHIFT_8402, BPP_ASIC_2V0); +} + static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr) { unsigned int card_exist; @@ -295,6 +308,22 @@ static const struct pcr_ops rtl8411_pcr_ops = { .force_power_down = rtl8411_force_power_down, }; +static const struct pcr_ops rtl8402_pcr_ops = { + .fetch_vendor_settings = rtl8411_fetch_vendor_settings, + .extra_init_hw = rtl8411_extra_init_hw, + .optimize_phy = NULL, + .turn_on_led = rtl8411_turn_on_led, + .turn_off_led = rtl8411_turn_off_led, + .enable_auto_blink = rtl8411_enable_auto_blink, + .disable_auto_blink = rtl8411_disable_auto_blink, + .card_power_on = rtl8411_card_power_on, + .card_power_off = rtl8411_card_power_off, + .switch_output_voltage = rtl8402_switch_output_voltage, + .cd_deglitch = rtl8411_cd_deglitch, + .conv_clk_and_div_n = rtl8411_conv_clk_and_div_n, + .force_power_down = rtl8411_force_power_down, +}; + static const struct pcr_ops rtl8411b_pcr_ops = { .fetch_vendor_settings = rtl8411b_fetch_vendor_settings, .extra_init_hw = rtl8411b_extra_init_hw, @@ -471,3 +500,10 @@ void rtl8411b_init_params(struct rtsx_pcr *pcr) else set_pull_ctrl_tables(pcr, rtl8411b_qfn64); } + +void rtl8402_init_params(struct rtsx_pcr *pcr) +{ + rtl8411_init_common_params(pcr); + pcr->ops = &rtl8402_pcr_ops; + set_pull_ctrl_tables(pcr, rtl8411); +} -- cgit v1.2.3