From 9e50108668a70a9927257298bd4e679300124420 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 29 Jan 2010 18:20:29 +0000 Subject: mfd: Add initial WM8994 support The WM8994 is a highly integrated ultra low power audio hub CODEC. Since it includes on-board regulators and GPIOs it is represented as a multi-function device, though the overwhelming majority of the functionality is provided by the ASoC CODEC driver. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 12 ++ drivers/mfd/Makefile | 1 + drivers/mfd/wm8994-core.c | 537 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 550 insertions(+) create mode 100644 drivers/mfd/wm8994-core.c (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index a760dbefd27a..64fbe3334eb3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -295,6 +295,18 @@ config MFD_WM8350_I2C I2C as the control interface. Additional options must be selected to enable support for the functionality of the chip. +config MFD_WM8994 + tristate "Support Wolfson Microelectronics WM8994" + select MFD_CORE + depends on I2C + help + The WM8994 is a highly integrated hi-fi CODEC designed for + smartphone applicatiosn. As well as audio functionality it + has on board GPIO and regulator functionality which is + supported via the relevant subsystems. This driver provides + core support for the WM8994, in order to use the actual + functionaltiy of the device other drivers must be enabled. + config MFD_PCF50633 tristate "Support for NXP PCF50633" depends on I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 142d31202b14..878cac691067 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -25,6 +25,7 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o wm8350-objs += wm8350-irq.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o +obj-$(CONFIG_MFD_WM8994) += wm8994-core.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c new file mode 100644 index 000000000000..299c1af1334e --- /dev/null +++ b/drivers/mfd/wm8994-core.c @@ -0,0 +1,537 @@ +/* + * wm8994-core.c -- Device access for Wolfson WM8994 + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static int wm8994_read(struct wm8994 *wm8994, unsigned short reg, + int bytes, void *dest) +{ + int ret, i; + u16 *buf = dest; + + BUG_ON(bytes % 2); + BUG_ON(bytes <= 0); + + ret = wm8994->read_dev(wm8994, reg, bytes, dest); + if (ret < 0) + return ret; + + for (i = 0; i < bytes / 2; i++) { + buf[i] = be16_to_cpu(buf[i]); + + dev_vdbg(wm8994->dev, "Read %04x from R%d(0x%x)\n", + buf[i], reg + i, reg + i); + } + + return 0; +} + +/** + * wm8994_reg_read: Read a single WM8994 register. + * + * @wm8994: Device to read from. + * @reg: Register to read. + */ +int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg) +{ + unsigned short val; + int ret; + + mutex_lock(&wm8994->io_lock); + + ret = wm8994_read(wm8994, reg, 2, &val); + + mutex_unlock(&wm8994->io_lock); + + if (ret < 0) + return ret; + else + return val; +} +EXPORT_SYMBOL_GPL(wm8994_reg_read); + +/** + * wm8994_bulk_read: Read multiple WM8994 registers + * + * @wm8994: Device to read from + * @reg: First register + * @count: Number of registers + * @buf: Buffer to fill. + */ +int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, + int count, u16 *buf) +{ + int ret; + + mutex_lock(&wm8994->io_lock); + + ret = wm8994_read(wm8994, reg, count * 2, buf); + + mutex_unlock(&wm8994->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm8994_bulk_read); + +static int wm8994_write(struct wm8994 *wm8994, unsigned short reg, + int bytes, void *src) +{ + u16 *buf = src; + int i; + + BUG_ON(bytes % 2); + BUG_ON(bytes <= 0); + + for (i = 0; i < bytes / 2; i++) { + dev_vdbg(wm8994->dev, "Write %04x to R%d(0x%x)\n", + buf[i], reg + i, reg + i); + + buf[i] = cpu_to_be16(buf[i]); + } + + return wm8994->write_dev(wm8994, reg, bytes, src); +} + +/** + * wm8994_reg_write: Write a single WM8994 register. + * + * @wm8994: Device to write to. + * @reg: Register to write to. + * @val: Value to write. + */ +int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg, + unsigned short val) +{ + int ret; + + mutex_lock(&wm8994->io_lock); + + ret = wm8994_write(wm8994, reg, 2, &val); + + mutex_unlock(&wm8994->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm8994_reg_write); + +/** + * wm8994_set_bits: Set the value of a bitfield in a WM8994 register + * + * @wm8994: Device to write to. + * @reg: Register to write to. + * @mask: Mask of bits to set. + * @val: Value to set (unshifted) + */ +int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg, + unsigned short mask, unsigned short val) +{ + int ret; + u16 r; + + mutex_lock(&wm8994->io_lock); + + ret = wm8994_read(wm8994, reg, 2, &r); + if (ret < 0) + goto out; + + r &= ~mask; + r |= val; + + ret = wm8994_write(wm8994, reg, 2, &r); + +out: + mutex_unlock(&wm8994->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm8994_set_bits); + +static struct mfd_cell wm8994_regulator_devs[] = { + { .name = "wm8994-ldo", .id = 1 }, + { .name = "wm8994-ldo", .id = 2 }, +}; + +static struct mfd_cell wm8994_devs[] = { + { .name = "wm8994-codec" }, + { .name = "wm8994-gpio" }, +}; + +/* + * Supplies for the main bulk of CODEC; the LDO supplies are ignored + * and should be handled via the standard regulator API supply + * management. + */ +static const char *wm8994_main_supplies[] = { + "DBVDD", + "DCVDD", + "AVDD1", + "AVDD2", + "CPVDD", + "SPKVDD1", + "SPKVDD2", +}; + +#ifdef CONFIG_PM +static int wm8994_device_suspend(struct device *dev) +{ + struct wm8994 *wm8994 = dev_get_drvdata(dev); + int ret; + + /* GPIO configuration state is saved here since we may be configuring + * the GPIO alternate functions even if we're not using the gpiolib + * driver for them. + */ + ret = wm8994_read(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2, + &wm8994->gpio_regs); + if (ret < 0) + dev_err(dev, "Failed to save GPIO registers: %d\n", ret); + + /* For similar reasons we also stash the regulator states */ + ret = wm8994_read(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2, + &wm8994->ldo_regs); + if (ret < 0) + dev_err(dev, "Failed to save LDO registers: %d\n", ret); + + ret = regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies), + wm8994->supplies); + if (ret != 0) { + dev_err(dev, "Failed to disable supplies: %d\n", ret); + return ret; + } + + return 0; +} + +static int wm8994_device_resume(struct device *dev) +{ + struct wm8994 *wm8994 = dev_get_drvdata(dev); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8994_main_supplies), + wm8994->supplies); + if (ret != 0) { + dev_err(dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2, + &wm8994->ldo_regs); + if (ret < 0) + dev_err(dev, "Failed to restore LDO registers: %d\n", ret); + + ret = wm8994_write(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2, + &wm8994->gpio_regs); + if (ret < 0) + dev_err(dev, "Failed to restore GPIO registers: %d\n", ret); + + return 0; +} +#endif + +#ifdef CONFIG_REGULATOR +static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) +{ + struct wm8994_ldo_pdata *ldo_pdata; + + if (!pdata) + return 0; + + ldo_pdata = &pdata->ldo[ldo]; + + if (!ldo_pdata->init_data) + return 0; + + return ldo_pdata->init_data->num_consumer_supplies != 0; +} +#else +static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) +{ + return 0; +} +#endif + +/* + * Instantiate the generic non-control parts of the device. + */ +static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq) +{ + struct wm8994_pdata *pdata = wm8994->dev->platform_data; + int ret, i; + + mutex_init(&wm8994->io_lock); + dev_set_drvdata(wm8994->dev, wm8994); + + /* Add the on-chip regulators first for bootstrapping */ + ret = mfd_add_devices(wm8994->dev, -1, + wm8994_regulator_devs, + ARRAY_SIZE(wm8994_regulator_devs), + NULL, 0); + if (ret != 0) { + dev_err(wm8994->dev, "Failed to add children: %d\n", ret); + goto err; + } + + wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) * + ARRAY_SIZE(wm8994_main_supplies), + GFP_KERNEL); + if (!wm8994->supplies) + goto err; + + for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++) + wm8994->supplies[i].supply = wm8994_main_supplies[i]; + + ret = regulator_bulk_get(wm8994->dev, ARRAY_SIZE(wm8994_main_supplies), + wm8994->supplies); + if (ret != 0) { + dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret); + goto err_get; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8994_main_supplies), + wm8994->supplies); + if (ret != 0) { + dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret); + goto err_supplies; + } + + ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET); + if (ret < 0) { + dev_err(wm8994->dev, "Failed to read ID register\n"); + goto err_enable; + } + if (ret != 0x8994) { + dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n", + ret); + ret = -EINVAL; + goto err_enable; + } + + ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION); + if (ret < 0) { + dev_err(wm8994->dev, "Failed to read revision register: %d\n", + ret); + goto err_enable; + } + + switch (ret) { + case 0: + case 1: + dev_warn(wm8994->dev, "revision %c not fully supported\n", + 'A' + ret); + break; + default: + dev_info(wm8994->dev, "revision %c\n", 'A' + ret); + break; + } + + + if (pdata) { + wm8994->gpio_base = pdata->gpio_base; + + /* GPIO configuration is only applied if it's non-zero */ + for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { + if (pdata->gpio_defaults[i]) { + wm8994_set_bits(wm8994, WM8994_GPIO_1 + i, + 0xffff, + pdata->gpio_defaults[i]); + } + } + } + + /* In some system designs where the regulators are not in use, + * we can achieve a small reduction in leakage currents by + * floating LDO outputs. This bit makes no difference if the + * LDOs are enabled, it only affects cases where the LDOs were + * in operation and are then disabled. + */ + for (i = 0; i < WM8994_NUM_LDO_REGS; i++) { + if (wm8994_ldo_in_use(pdata, i)) + wm8994_set_bits(wm8994, WM8994_LDO_1 + i, + WM8994_LDO1_DISCH, WM8994_LDO1_DISCH); + else + wm8994_set_bits(wm8994, WM8994_LDO_1 + i, + WM8994_LDO1_DISCH, 0); + } + + ret = mfd_add_devices(wm8994->dev, -1, + wm8994_devs, ARRAY_SIZE(wm8994_devs), + NULL, 0); + if (ret != 0) { + dev_err(wm8994->dev, "Failed to add children: %d\n", ret); + goto err_enable; + } + + return 0; + +err_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies), + wm8994->supplies); +err_get: + regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies); +err_supplies: + kfree(wm8994->supplies); +err: + mfd_remove_devices(wm8994->dev); + kfree(wm8994); + return ret; +} + +static void wm8994_device_exit(struct wm8994 *wm8994) +{ + mfd_remove_devices(wm8994->dev); + regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies), + wm8994->supplies); + regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies); + kfree(wm8994->supplies); + kfree(wm8994); +} + +static int wm8994_i2c_read_device(struct wm8994 *wm8994, unsigned short reg, + int bytes, void *dest) +{ + struct i2c_client *i2c = wm8994->control_data; + int ret; + u16 r = cpu_to_be16(reg); + + ret = i2c_master_send(i2c, (unsigned char *)&r, 2); + if (ret < 0) + return ret; + if (ret != 2) + return -EIO; + + ret = i2c_master_recv(i2c, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; +} + +/* Currently we allocate the write buffer on the stack; this is OK for + * small writes - if we need to do large writes this will need to be + * revised. + */ +static int wm8994_i2c_write_device(struct wm8994 *wm8994, unsigned short reg, + int bytes, void *src) +{ + struct i2c_client *i2c = wm8994->control_data; + unsigned char msg[bytes + 2]; + int ret; + + reg = cpu_to_be16(reg); + memcpy(&msg[0], ®, 2); + memcpy(&msg[2], src, bytes); + + ret = i2c_master_send(i2c, msg, bytes + 2); + if (ret < 0) + return ret; + if (ret < bytes + 2) + return -EIO; + + return 0; +} + +static int wm8994_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8994 *wm8994; + + wm8994 = kzalloc(sizeof(struct wm8994), GFP_KERNEL); + if (wm8994 == NULL) { + kfree(i2c); + return -ENOMEM; + } + + i2c_set_clientdata(i2c, wm8994); + wm8994->dev = &i2c->dev; + wm8994->control_data = i2c; + wm8994->read_dev = wm8994_i2c_read_device; + wm8994->write_dev = wm8994_i2c_write_device; + + return wm8994_device_init(wm8994, id->driver_data, i2c->irq); +} + +static int wm8994_i2c_remove(struct i2c_client *i2c) +{ + struct wm8994 *wm8994 = i2c_get_clientdata(i2c); + + wm8994_device_exit(wm8994); + + return 0; +} + +#ifdef CONFIG_PM +static int wm8994_i2c_suspend(struct i2c_client *i2c, pm_message_t state) +{ + return wm8994_device_suspend(&i2c->dev); +} + +static int wm8994_i2c_resume(struct i2c_client *i2c) +{ + return wm8994_device_resume(&i2c->dev); +} +#else +#define wm8994_i2c_suspend NULL +#define wm8994_i2c_resume NULL +#endif + +static const struct i2c_device_id wm8994_i2c_id[] = { + { "wm8994", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id); + +static struct i2c_driver wm8994_i2c_driver = { + .driver = { + .name = "wm8994", + .owner = THIS_MODULE, + }, + .probe = wm8994_i2c_probe, + .remove = wm8994_i2c_remove, + .suspend = wm8994_i2c_suspend, + .resume = wm8994_i2c_resume, + .id_table = wm8994_i2c_id, +}; + +static int __init wm8994_i2c_init(void) +{ + int ret; + + ret = i2c_add_driver(&wm8994_i2c_driver); + if (ret != 0) + pr_err("Failed to register wm8994 I2C driver: %d\n", ret); + + return ret; +} +module_init(wm8994_i2c_init); + +static void __exit wm8994_i2c_exit(void) +{ + i2c_del_driver(&wm8994_i2c_driver); +} +module_exit(wm8994_i2c_exit); + +MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown "); -- cgit v1.2.3