From b01e9348e106544e50691252bf58cde239681f19 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 4 Sep 2017 15:22:42 +0200 Subject: mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants Both Bay and Cherry Trail devices may be used together with a Crystal Cove PMIC. Each platform has its own variant of the PMIC, which both use the same ACPI HID, but they are not 100% compatible. This commits makes the intel_soc_pmic_core code check the _HRV of the ACPI-firmware-node and selects intel_soc_pmic_config_byt_crc resp. intel_soc_pmic_config_cht_crc based on this. This fixes the Bay Trail specific ACPI OpRegion code causing problems on Cherry Trail devices. Specifically this was causing the external microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work and the eMMC to become unreliable and throw lots of errors. Fixes: 5165238460 ("mfd: intel_soc_pmic: Core driver") Reported-and-tested-by: russianneuromancer Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 4 ++-- drivers/mfd/intel_soc_pmic_core.c | 34 ++++++++++++++++++++++++++++------ 2 files changed, 30 insertions(+), 8 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 7bc4ee1f9c10..fc5e4fef89d2 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -467,12 +467,12 @@ config LPC_SCH config INTEL_SOC_PMIC bool "Support for Crystal Cove PMIC" - depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK + depends on ACPI && HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK depends on X86 || COMPILE_TEST select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - select I2C_DESIGNWARE_PLATFORM if ACPI + select I2C_DESIGNWARE_PLATFORM help Select this option to enable support for Crystal Cove PMIC on some Intel SoC systems. The PMIC provides ADC, GPIO, diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c index 2234a847370a..36adf9e8153e 100644 --- a/drivers/mfd/intel_soc_pmic_core.c +++ b/drivers/mfd/intel_soc_pmic_core.c @@ -16,6 +16,7 @@ * Author: Zhu, Lejun */ +#include #include #include #include @@ -28,6 +29,10 @@ #include #include "intel_soc_pmic_core.h" +/* Crystal Cove PMIC shares same ACPI ID between different platforms */ +#define BYT_CRC_HRV 2 +#define CHT_CRC_HRV 3 + /* Lookup table for the Panel Enable/Disable line as GPIO signals */ static struct gpiod_lookup_table panel_gpio_table = { /* Intel GFX is consumer */ @@ -48,16 +53,33 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *i2c_id) { struct device *dev = &i2c->dev; - const struct acpi_device_id *id; struct intel_soc_pmic_config *config; struct intel_soc_pmic *pmic; + unsigned long long hrv; + acpi_status status; int ret; - id = acpi_match_device(dev->driver->acpi_match_table, dev); - if (!id || !id->driver_data) + /* + * There are 2 different Crystal Cove PMICs a Bay Trail and Cherry + * Trail version, use _HRV to differentiate between the 2. + */ + status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv); + if (ACPI_FAILURE(status)) { + dev_err(dev, "Failed to get PMIC hardware revision\n"); return -ENODEV; - - config = (struct intel_soc_pmic_config *)id->driver_data; + } + + switch (hrv) { + case BYT_CRC_HRV: + config = &intel_soc_pmic_config_byt_crc; + break; + case CHT_CRC_HRV: + config = &intel_soc_pmic_config_cht_crc; + break; + default: + dev_warn(dev, "Unknown hardware rev %llu, assuming BYT\n", hrv); + config = &intel_soc_pmic_config_byt_crc; + } pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL); if (!pmic) @@ -157,7 +179,7 @@ MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_i2c_id); #if defined(CONFIG_ACPI) static const struct acpi_device_id intel_soc_pmic_acpi_match[] = { - {"INT33FD", (kernel_ulong_t)&intel_soc_pmic_config_byt_crc}, + { "INT33FD" }, { }, }; MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match); -- cgit v1.2.3