From 99f09bebbe4e9e008a4e0555340494840c6bd644 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Thu, 24 Nov 2011 18:12:18 +0900 Subject: misc: Add driver support for MAX8997 MUIC The MUIC function in MAX8997 device can be used as a USB port detector and switch. This patch supports the MUIC feature of MAX8997. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Samuel Ortiz --- drivers/misc/Kconfig | 8 + drivers/misc/Makefile | 1 + drivers/misc/max8997-muic.c | 634 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 643 insertions(+) create mode 100644 drivers/misc/max8997-muic.c (limited to 'drivers/misc') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 5664696f2d3a..6a1a092db146 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -500,6 +500,14 @@ config USB_SWITCH_FSA9480 stereo and mono audio, video, microphone and UART data to use a common connector port. +config MAX8997_MUIC + tristate "MAX8997 MUIC Support" + depends on MFD_MAX8997 + help + If you say yes here you get support for the MUIC device of + Maxim MAX8997 PMIC. + The MAX8997 MUIC is a USB port accessory detector and switch. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index b26495a02554..3e1d80106f04 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -48,3 +48,4 @@ obj-y += lis3lv02d/ obj-y += carma/ obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ +obj-$(CONFIG_MAX8997_MUIC) += max8997-muic.o diff --git a/drivers/misc/max8997-muic.c b/drivers/misc/max8997-muic.c new file mode 100644 index 000000000000..74a9448a93d2 --- /dev/null +++ b/drivers/misc/max8997-muic.c @@ -0,0 +1,634 @@ +/* + * max8997-muic.c - MAX8997 muic driver for the Maxim 8997 + * + * Copyright (C) 2011 Samsung Electrnoics + * Donggeun Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* MAX8997-MUIC STATUS1 register */ +#define STATUS1_ADC_SHIFT 0 +#define STATUS1_ADCLOW_SHIFT 5 +#define STATUS1_ADCERR_SHIFT 6 +#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) +#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) +#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) + +/* MAX8997-MUIC STATUS2 register */ +#define STATUS2_CHGTYP_SHIFT 0 +#define STATUS2_CHGDETRUN_SHIFT 3 +#define STATUS2_DCDTMR_SHIFT 4 +#define STATUS2_DBCHG_SHIFT 5 +#define STATUS2_VBVOLT_SHIFT 6 +#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) +#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) +#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) +#define STATUS2_DBCHG_MASK (0x1 << STATUS2_DBCHG_SHIFT) +#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) + +/* MAX8997-MUIC STATUS3 register */ +#define STATUS3_OVP_SHIFT 2 +#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) + +/* MAX8997-MUIC CONTROL1 register */ +#define COMN1SW_SHIFT 0 +#define COMP2SW_SHIFT 3 +#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) +#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) +#define SW_MASK (COMP2SW_MASK | COMN1SW_MASK) + +#define MAX8997_SW_USB ((1 << COMP2SW_SHIFT) | (1 << COMN1SW_SHIFT)) +#define MAX8997_SW_AUDIO ((2 << COMP2SW_SHIFT) | (2 << COMN1SW_SHIFT)) +#define MAX8997_SW_UART ((3 << COMP2SW_SHIFT) | (3 << COMN1SW_SHIFT)) +#define MAX8997_SW_OPEN ((0 << COMP2SW_SHIFT) | (0 << COMN1SW_SHIFT)) + +#define MAX8997_ADC_GROUND 0x00 +#define MAX8997_ADC_MHL 0x01 +#define MAX8997_ADC_JIG_USB_1 0x18 +#define MAX8997_ADC_JIG_USB_2 0x19 +#define MAX8997_ADC_DESKDOCK 0x1a +#define MAX8997_ADC_JIG_UART 0x1c +#define MAX8997_ADC_CARDOCK 0x1d +#define MAX8997_ADC_OPEN 0x1f + +struct max8997_muic_irq { + unsigned int irq; + const char *name; +}; + +static struct max8997_muic_irq muic_irqs[] = { + { MAX8997_MUICIRQ_ADCError, "muic-ADC_error" }, + { MAX8997_MUICIRQ_ADCLow, "muic-ADC_low" }, + { MAX8997_MUICIRQ_ADC, "muic-ADC" }, + { MAX8997_MUICIRQ_VBVolt, "muic-VB_voltage" }, + { MAX8997_MUICIRQ_DBChg, "muic-DB_charger" }, + { MAX8997_MUICIRQ_DCDTmr, "muic-DCD_timer" }, + { MAX8997_MUICIRQ_ChgDetRun, "muic-CDR_status" }, + { MAX8997_MUICIRQ_ChgTyp, "muic-charger_type" }, + { MAX8997_MUICIRQ_OVP, "muic-over_voltage" }, +}; + +struct max8997_muic_info { + struct device *dev; + struct max8997_dev *iodev; + struct i2c_client *muic; + struct max8997_muic_platform_data *muic_pdata; + + int irq; + struct work_struct irq_work; + + enum max8997_muic_charger_type pre_charger_type; + int pre_adc; + + struct mutex mutex; +}; + +static int max8997_muic_handle_usb(struct max8997_muic_info *info, + enum max8997_muic_usb_type usb_type, bool attached) +{ + struct max8997_muic_platform_data *mdata = info->muic_pdata; + int ret = 0; + + if (usb_type == MAX8997_USB_HOST) { + /* switch to USB */ + ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, + attached ? MAX8997_SW_USB : MAX8997_SW_OPEN, + SW_MASK); + if (ret) { + dev_err(info->dev, "failed to update muic register\n"); + goto out; + } + } + + if (mdata->usb_callback) + mdata->usb_callback(usb_type, attached); +out: + return ret; +} + +static void max8997_muic_handle_mhl(struct max8997_muic_info *info, + bool attached) +{ + struct max8997_muic_platform_data *mdata = info->muic_pdata; + + if (mdata->mhl_callback) + mdata->mhl_callback(attached); +} + +static int max8997_muic_handle_dock(struct max8997_muic_info *info, + int adc, bool attached) +{ + struct max8997_muic_platform_data *mdata = info->muic_pdata; + int ret = 0; + + /* switch to AUDIO */ + ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, + attached ? MAX8997_SW_AUDIO : MAX8997_SW_OPEN, + SW_MASK); + if (ret) { + dev_err(info->dev, "failed to update muic register\n"); + goto out; + } + + switch (adc) { + case MAX8997_ADC_DESKDOCK: + if (mdata->deskdock_callback) + mdata->deskdock_callback(attached); + break; + case MAX8997_ADC_CARDOCK: + if (mdata->cardock_callback) + mdata->cardock_callback(attached); + break; + default: + break; + } +out: + return ret; +} + +static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, + bool attached) +{ + struct max8997_muic_platform_data *mdata = info->muic_pdata; + int ret = 0; + + /* switch to UART */ + ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, + attached ? MAX8997_SW_UART : MAX8997_SW_OPEN, + SW_MASK); + if (ret) { + dev_err(info->dev, "failed to update muic register\n"); + goto out; + } + + if (mdata->uart_callback) + mdata->uart_callback(attached); +out: + return ret; +} + +static int max8997_muic_handle_adc_detach(struct max8997_muic_info *info) +{ + int ret = 0; + + switch (info->pre_adc) { + case MAX8997_ADC_GROUND: + ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, false); + break; + case MAX8997_ADC_MHL: + max8997_muic_handle_mhl(info, false); + break; + case MAX8997_ADC_JIG_USB_1: + case MAX8997_ADC_JIG_USB_2: + ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, false); + break; + case MAX8997_ADC_DESKDOCK: + case MAX8997_ADC_CARDOCK: + ret = max8997_muic_handle_dock(info, info->pre_adc, false); + break; + case MAX8997_ADC_JIG_UART: + ret = max8997_muic_handle_jig_uart(info, false); + break; + default: + break; + } + + return ret; +} + +static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc) +{ + int ret = 0; + + switch (adc) { + case MAX8997_ADC_GROUND: + ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, true); + break; + case MAX8997_ADC_MHL: + max8997_muic_handle_mhl(info, true); + break; + case MAX8997_ADC_JIG_USB_1: + case MAX8997_ADC_JIG_USB_2: + ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, true); + break; + case MAX8997_ADC_DESKDOCK: + case MAX8997_ADC_CARDOCK: + ret = max8997_muic_handle_dock(info, adc, true); + break; + case MAX8997_ADC_JIG_UART: + ret = max8997_muic_handle_jig_uart(info, true); + break; + case MAX8997_ADC_OPEN: + ret = max8997_muic_handle_adc_detach(info); + break; + default: + break; + } + + info->pre_adc = adc; + + return ret; +} + +static int max8997_muic_handle_charger_type(struct max8997_muic_info *info, + enum max8997_muic_charger_type charger_type) +{ + struct max8997_muic_platform_data *mdata = info->muic_pdata; + u8 adc; + int ret; + + ret = max8997_read_reg(info->muic, MAX8997_MUIC_REG_STATUS1, &adc); + if (ret) { + dev_err(info->dev, "failed to read muic register\n"); + goto out; + } + + switch (charger_type) { + case MAX8997_CHARGER_TYPE_NONE: + if (mdata->charger_callback) + mdata->charger_callback(false, charger_type); + if (info->pre_charger_type == MAX8997_CHARGER_TYPE_USB) { + max8997_muic_handle_usb(info, + MAX8997_USB_DEVICE, false); + } + break; + case MAX8997_CHARGER_TYPE_USB: + if ((adc & STATUS1_ADC_MASK) == MAX8997_ADC_OPEN) { + max8997_muic_handle_usb(info, + MAX8997_USB_DEVICE, true); + } + if (mdata->charger_callback) + mdata->charger_callback(true, charger_type); + break; + case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: + case MAX8997_CHARGER_TYPE_DEDICATED_CHG: + case MAX8997_CHARGER_TYPE_500MA: + case MAX8997_CHARGER_TYPE_1A: + if (mdata->charger_callback) + mdata->charger_callback(true, charger_type); + break; + default: + break; + } + + info->pre_charger_type = charger_type; +out: + return ret; +} + +static void max8997_muic_irq_work(struct work_struct *work) +{ + struct max8997_muic_info *info = container_of(work, + struct max8997_muic_info, irq_work); + struct max8997_platform_data *pdata = + dev_get_platdata(info->iodev->dev); + char env_name_str[30], env_state_str[15]; + char *envp[] = { env_name_str, env_state_str, NULL }; + u8 status[3]; + u8 adc, adc_low, adc_err; + u8 vb_volt, db_chg, dcd_tmr, cdr, chg_type, ovp; + + int irq_type = info->irq - pdata->irq_base; + int ret; + + mutex_lock(&info->mutex); + + ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, + 3, status); + if (ret) { + dev_err(info->dev, "failed to read muic register\n"); + mutex_unlock(&info->mutex); + return; + } + + dev_dbg(info->dev, "%s: STATUS1:0x%x, 2:0x%x\n", __func__, + status[0], status[1]); + + switch (irq_type) { + case MAX8997_MUICIRQ_ADCError: + adc_err = status[0] & STATUS1_ADCERR_MASK; + adc_err >>= STATUS1_ADCERR_SHIFT; + sprintf(env_name_str, "IRQ=%s", "ADC_Error"); + sprintf(env_state_str, "STATE=%d", adc_err); + break; + case MAX8997_MUICIRQ_ADCLow: + adc_low = status[0] & STATUS1_ADCLOW_MASK; + adc_low >>= STATUS1_ADCLOW_SHIFT; + sprintf(env_name_str, "IRQ=%s", "ADC_Low"); + sprintf(env_state_str, "STATE=%d", adc_low); + break; + case MAX8997_MUICIRQ_ADC: + adc = status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + max8997_muic_handle_adc(info, adc); + + sprintf(env_name_str, "IRQ=%s", "ADC"); + sprintf(env_state_str, "STATE=%d", adc); + break; + case MAX8997_MUICIRQ_VBVolt: + vb_volt = status[1] & STATUS2_VBVOLT_MASK; + vb_volt >>= STATUS2_VBVOLT_SHIFT; + sprintf(env_name_str, "IRQ=%s", "VB_Volt"); + sprintf(env_state_str, "STATE=%d", vb_volt); + break; + case MAX8997_MUICIRQ_DBChg: + db_chg = status[1] & STATUS2_DBCHG_MASK; + db_chg >>= STATUS2_DBCHG_SHIFT; + sprintf(env_name_str, "IRQ=%s", "DB_CHARGER"); + sprintf(env_state_str, "STATE=%d", db_chg); + break; + case MAX8997_MUICIRQ_DCDTmr: + dcd_tmr = status[1] & STATUS2_DCDTMR_MASK; + dcd_tmr >>= STATUS2_DCDTMR_SHIFT; + sprintf(env_name_str, "IRQ=%s", "DCD_TIMER"); + sprintf(env_state_str, "STATE=%d", dcd_tmr); + break; + case MAX8997_MUICIRQ_ChgDetRun: + cdr = status[1] & STATUS2_CHGDETRUN_MASK; + cdr >>= STATUS2_CHGDETRUN_SHIFT; + sprintf(env_name_str, "IRQ=%s", "CHG_DET_RUN"); + sprintf(env_state_str, "STATE=%d", cdr); + break; + case MAX8997_MUICIRQ_ChgTyp: + chg_type = status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + max8997_muic_handle_charger_type(info, chg_type); + + sprintf(env_name_str, "IRQ=%s", "CHARGER_TYPE"); + sprintf(env_state_str, "STATE=%d", chg_type); + break; + case MAX8997_MUICIRQ_OVP: + ovp = status[2] & STATUS3_OVP_MASK; + ovp >>= STATUS3_OVP_SHIFT; + sprintf(env_name_str, "IRQ=%s", "OVER-VOLTAGE"); + sprintf(env_state_str, "STATE=%d", ovp); + break; + default: + break; + } + + kobject_uevent_env(&info->dev->kobj, KOBJ_CHANGE, envp); + + mutex_unlock(&info->mutex); + + return; +} + +static irqreturn_t max8997_muic_irq_handler(int irq, void *data) +{ + struct max8997_muic_info *info = data; + + dev_dbg(info->dev, "irq:%d\n", irq); + info->irq = irq; + + schedule_work(&info->irq_work); + + return IRQ_HANDLED; +} + +static void max8997_muic_detect_dev(struct max8997_muic_info *info) +{ + int ret; + u8 status[2], adc, chg_type; + + ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, + 2, status); + if (ret) { + dev_err(info->dev, "failed to read muic register\n"); + return; + } + + dev_info(info->dev, "STATUS1:0x%x, STATUS2:0x%x\n", + status[0], status[1]); + + adc = status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + chg_type = status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + max8997_muic_handle_adc(info, adc); + max8997_muic_handle_charger_type(info, chg_type); +} + +static ssize_t max8997_muic_show_manualsw(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct max8997_muic_info *info = dev_get_drvdata(dev); + int ret; + u8 value, manual_switch; + + ret = max8997_read_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, &value); + if (ret) { + dev_err(info->dev, "failed to read muic register\n"); + return sprintf(buf, "UNKNOWN\n"); + } + + manual_switch = value & (COMN1SW_MASK | COMP2SW_MASK); + + switch (manual_switch) { + case MAX8997_SW_USB: + return sprintf(buf, "USB\n"); + case MAX8997_SW_AUDIO: + return sprintf(buf, "AUDIO\n"); + case MAX8997_SW_UART: + return sprintf(buf, "UART\n"); + default: + return sprintf(buf, "OPEN\n"); + } +} + +static ssize_t max8997_muic_store_manualsw(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct max8997_muic_info *info = dev_get_drvdata(dev); + int ret; + u8 manual_switch; + + if (!strncmp(buf, "USB", 3)) { + manual_switch = MAX8997_SW_USB; + } else if (!strncmp(buf, "AUDIO", 5)) { + manual_switch = MAX8997_SW_AUDIO; + } else if (!strncmp(buf, "UART", 4)) { + manual_switch = MAX8997_SW_UART; + } else if (!strncmp(buf, "OPEN", 4)) { + manual_switch = MAX8997_SW_OPEN; + } else { + dev_err(info->dev, "invalid parameter\n"); + goto out; + } + + ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, + manual_switch, SW_MASK); + if (ret) + dev_err(info->dev, "failed to update muic register\n"); +out: + return count; +} + +static DEVICE_ATTR(switch, S_IRUGO | S_IWUSR, + max8997_muic_show_manualsw, max8997_muic_store_manualsw); + +static struct attribute *max8997_muic_attributes[] = { + &dev_attr_switch.attr, + NULL +}; + +static const struct attribute_group max8997_muic_group = { + .attrs = max8997_muic_attributes, +}; + +static void max8997_initialize_device(struct max8997_muic_info *info) +{ + struct max8997_muic_platform_data *mdata = info->muic_pdata; + int i; + + for (i = 0; i < mdata->num_init_data; i++) { + max8997_write_reg(info->muic, mdata->init_data[i].addr, + mdata->init_data[i].data); + } +} + +static int __devinit max8997_muic_probe(struct platform_device *pdev) +{ + struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev); + struct max8997_muic_info *info; + int ret, i; + + info = kzalloc(sizeof(struct max8997_muic_info), GFP_KERNEL); + if (!info) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + ret = -ENOMEM; + goto err_kfree; + } + + if (!pdata->muic_pdata) { + dev_err(&pdev->dev, "failed to get platform_data\n"); + ret = -EINVAL; + goto err_pdata; + } + info->muic_pdata = pdata->muic_pdata; + + info->dev = &pdev->dev; + info->iodev = iodev; + info->muic = iodev->muic; + + platform_set_drvdata(pdev, info); + mutex_init(&info->mutex); + + ret = sysfs_create_group(&pdev->dev.kobj, &max8997_muic_group); + if (ret) { + dev_err(&pdev->dev, + "failed to create max8997 muic attribute group\n"); + goto err_sysfs; + } + + INIT_WORK(&info->irq_work, max8997_muic_irq_work); + + for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) { + struct max8997_muic_irq *muic_irq = &muic_irqs[i]; + + ret = request_threaded_irq(pdata->irq_base + muic_irq->irq, + NULL, max8997_muic_irq_handler, + 0, muic_irq->name, + info); + if (ret) { + dev_err(&pdev->dev, + "failed: irq request (IRQ: %d," + " error :%d)\n", + muic_irq->irq, ret); + + for (i = i - 1; i >= 0; i--) + free_irq(muic_irq->irq, info); + + goto err_irq; + } + } + + /* Initialize registers according to platform data */ + max8997_initialize_device(info); + + /* Initial device detection */ + max8997_muic_detect_dev(info); + + return ret; + +err_irq: + sysfs_remove_group(&pdev->dev.kobj, &max8997_muic_group); +err_sysfs: +err_pdata: + kfree(info); +err_kfree: + return ret; +} + +static int __devexit max8997_muic_remove(struct platform_device *pdev) +{ + struct max8997_muic_info *info = platform_get_drvdata(pdev); + struct max8997_platform_data *pdata = + dev_get_platdata(info->iodev->dev); + int i; + + sysfs_remove_group(&pdev->dev.kobj, &max8997_muic_group); + + for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) + free_irq(pdata->irq_base + muic_irqs[i].irq, info); + + kfree(info); + + return 0; +} + +static struct platform_driver max8997_muic_driver = { + .driver = { + .name = "max8997-muic", + .owner = THIS_MODULE, + }, + .probe = max8997_muic_probe, + .remove = __devexit_p(max8997_muic_remove), +}; + +static int __init max8997_muic_init(void) +{ + return platform_driver_register(&max8997_muic_driver); +} +module_init(max8997_muic_init); + +static void __exit max8997_muic_exit(void) +{ + platform_driver_unregister(&max8997_muic_driver); +} +module_exit(max8997_muic_exit); + +MODULE_DESCRIPTION("Maxim MAX8997 MUIC driver"); +MODULE_AUTHOR("Donggeun Kim "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ee66e653ca7425bc8ffca4e00f19a8057cd14e4d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 2 Dec 2011 14:16:33 +0100 Subject: mfd: Unify abx500 headers in mfd/abx500 This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. get prefixed and are now e.g. . The top-level abstract interface remains in . Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- arch/arm/mach-ux500/board-mop500.c | 4 +- arch/arm/mach-ux500/board-u5500.c | 2 +- .../mach-ux500/include/mach/irqs-board-mop500.h | 2 +- drivers/input/misc/ab8500-ponkey.c | 2 +- drivers/mfd/ab5500-core.c | 2 +- drivers/mfd/ab5500-debugfs.c | 2 +- drivers/mfd/ab8500-core.c | 2 +- drivers/mfd/ab8500-debugfs.c | 2 +- drivers/mfd/ab8500-gpadc.c | 4 +- drivers/mfd/ab8500-i2c.c | 2 +- drivers/mfd/ab8500-sysctrl.c | 4 +- drivers/misc/ab8500-pwm.c | 2 +- drivers/regulator/ab8500.c | 2 +- drivers/rtc/rtc-ab8500.c | 2 +- drivers/usb/otg/ab8500-usb.c | 2 +- include/linux/mfd/ab5500/ab5500.h | 140 ------------ include/linux/mfd/ab8500.h | 201 ---------------- include/linux/mfd/ab8500/gpadc.h | 35 --- include/linux/mfd/ab8500/gpio.h | 21 -- include/linux/mfd/ab8500/sysctrl.h | 254 --------------------- include/linux/mfd/abx500/ab5500.h | 140 ++++++++++++ include/linux/mfd/abx500/ab8500-gpadc.h | 35 +++ include/linux/mfd/abx500/ab8500-gpio.h | 21 ++ include/linux/mfd/abx500/ab8500-sysctrl.h | 254 +++++++++++++++++++++ include/linux/mfd/abx500/ab8500.h | 201 ++++++++++++++++ 25 files changed, 669 insertions(+), 669 deletions(-) delete mode 100644 include/linux/mfd/ab5500/ab5500.h delete mode 100644 include/linux/mfd/ab8500.h delete mode 100644 include/linux/mfd/ab8500/gpadc.h delete mode 100644 include/linux/mfd/ab8500/gpio.h delete mode 100644 include/linux/mfd/ab8500/sysctrl.h create mode 100644 include/linux/mfd/abx500/ab5500.h create mode 100644 include/linux/mfd/abx500/ab8500-gpadc.h create mode 100644 include/linux/mfd/abx500/ab8500-gpio.h create mode 100644 include/linux/mfd/abx500/ab8500-sysctrl.h create mode 100644 include/linux/mfd/abx500/ab8500.h (limited to 'drivers/misc') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bdd7b80dd7ad..80cef36d71ce 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -19,11 +19,11 @@ #include #include #include -#include +#include #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 82025ba70c03..4ecb07a93f14 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 47969909836c..d2d4131435a6 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -9,7 +9,7 @@ #define __MACH_IRQS_BOARD_MOP500_H /* Number of AB8500 irqs is taken from header file */ -#include +#include #define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c index 3d3288a78fdc..3f199e1539bf 100644 --- a/drivers/input/misc/ab8500-ponkey.c +++ b/drivers/input/misc/ab8500-ponkey.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include /** diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c index ec10629a0b0b..bd56a764dea1 100644 --- a/drivers/mfd/ab5500-core.c +++ b/drivers/mfd/ab5500-core.c @@ -22,8 +22,8 @@ #include #include #include -#include #include +#include #include #include #include diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c index b7b2d3483fd4..72006940937a 100644 --- a/drivers/mfd/ab5500-debugfs.c +++ b/drivers/mfd/ab5500-debugfs.c @@ -7,8 +7,8 @@ #include #include #include -#include #include +#include #include #include "ab5500-core.h" diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index d3d572b2317b..53e2a80f42fa 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include /* diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index dedb7f65cea6..9a0211aa8897 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -13,7 +13,7 @@ #include #include -#include +#include static u32 debug_bank; static u32 debug_address; diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index e985d1701a83..c39fc716e1dc 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -18,9 +18,9 @@ #include #include #include -#include #include -#include +#include +#include /* * GPADC register offsets diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c index 9be541c6b004..087fecd71ce0 100644 --- a/drivers/mfd/ab8500-i2c.c +++ b/drivers/mfd/ab8500-i2c.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index f20feefac190..c28d4eb1eff0 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -7,9 +7,9 @@ #include #include #include -#include #include -#include +#include +#include static struct device *sysctrl_dev; diff --git a/drivers/misc/ab8500-pwm.c b/drivers/misc/ab8500-pwm.c index 2208a9d52622..d7a9aa14e5d5 100644 --- a/drivers/misc/ab8500-pwm.c +++ b/drivers/misc/ab8500-pwm.c @@ -8,8 +8,8 @@ #include #include #include -#include #include +#include #include /* diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 6e1ae69646b3..80d08237a5a7 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -16,8 +16,8 @@ #include #include #include -#include #include +#include #include #include #include diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c index e346705aae92..db16ce212d6b 100644 --- a/drivers/rtc/rtc-ab8500.c +++ b/drivers/rtc/rtc-ab8500.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #define AB8500_RTC_SOFF_STAT_REG 0x00 diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c index 07ccea9ada40..74fe6e62e0f7 100644 --- a/drivers/usb/otg/ab8500-usb.c +++ b/drivers/usb/otg/ab8500-usb.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #define AB8500_MAIN_WD_CTRL_REG 0x01 #define AB8500_USB_LINE_STAT_REG 0x80 diff --git a/include/linux/mfd/ab5500/ab5500.h b/include/linux/mfd/ab5500/ab5500.h deleted file mode 100644 index a720051ae933..000000000000 --- a/include/linux/mfd/ab5500/ab5500.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright (C) ST-Ericsson 2011 - * - * License Terms: GNU General Public License v2 - */ -#ifndef MFD_AB5500_H -#define MFD_AB5500_H - -#include - -enum ab5500_devid { - AB5500_DEVID_ADC, - AB5500_DEVID_LEDS, - AB5500_DEVID_POWER, - AB5500_DEVID_REGULATORS, - AB5500_DEVID_SIM, - AB5500_DEVID_RTC, - AB5500_DEVID_CHARGER, - AB5500_DEVID_FUELGAUGE, - AB5500_DEVID_VIBRATOR, - AB5500_DEVID_CODEC, - AB5500_DEVID_USB, - AB5500_DEVID_OTP, - AB5500_DEVID_VIDEO, - AB5500_DEVID_DBIECI, - AB5500_DEVID_ONSWA, - AB5500_NUM_DEVICES, -}; - -enum ab5500_banks { - AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0, - AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1, - AB5500_BANK_VDENC = 2, - AB5500_BANK_SIM_USBSIM = 3, - AB5500_BANK_LED = 4, - AB5500_BANK_ADC = 5, - AB5500_BANK_RTC = 6, - AB5500_BANK_STARTUP = 7, - AB5500_BANK_DBI_ECI = 8, - AB5500_BANK_CHG = 9, - AB5500_BANK_FG_BATTCOM_ACC = 10, - AB5500_BANK_USB = 11, - AB5500_BANK_IT = 12, - AB5500_BANK_VIBRA = 13, - AB5500_BANK_AUDIO_HEADSETUSB = 14, - AB5500_NUM_BANKS = 15, -}; - -enum ab5500_banks_addr { - AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A, - AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B, - AB5500_ADDR_VDENC = 0x06, - AB5500_ADDR_SIM_USBSIM = 0x04, - AB5500_ADDR_LED = 0x10, - AB5500_ADDR_ADC = 0x0A, - AB5500_ADDR_RTC = 0x0F, - AB5500_ADDR_STARTUP = 0x03, - AB5500_ADDR_DBI_ECI = 0x07, - AB5500_ADDR_CHG = 0x0B, - AB5500_ADDR_FG_BATTCOM_ACC = 0x0C, - AB5500_ADDR_USB = 0x05, - AB5500_ADDR_IT = 0x0E, - AB5500_ADDR_VIBRA = 0x02, - AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D, -}; - -/* - * Interrupt register offsets - * Bank : 0x0E - */ -#define AB5500_IT_SOURCE0_REG 0x20 -#define AB5500_IT_SOURCE1_REG 0x21 -#define AB5500_IT_SOURCE2_REG 0x22 -#define AB5500_IT_SOURCE3_REG 0x23 -#define AB5500_IT_SOURCE4_REG 0x24 -#define AB5500_IT_SOURCE5_REG 0x25 -#define AB5500_IT_SOURCE6_REG 0x26 -#define AB5500_IT_SOURCE7_REG 0x27 -#define AB5500_IT_SOURCE8_REG 0x28 -#define AB5500_IT_SOURCE9_REG 0x29 -#define AB5500_IT_SOURCE10_REG 0x2A -#define AB5500_IT_SOURCE11_REG 0x2B -#define AB5500_IT_SOURCE12_REG 0x2C -#define AB5500_IT_SOURCE13_REG 0x2D -#define AB5500_IT_SOURCE14_REG 0x2E -#define AB5500_IT_SOURCE15_REG 0x2F -#define AB5500_IT_SOURCE16_REG 0x30 -#define AB5500_IT_SOURCE17_REG 0x31 -#define AB5500_IT_SOURCE18_REG 0x32 -#define AB5500_IT_SOURCE19_REG 0x33 -#define AB5500_IT_SOURCE20_REG 0x34 -#define AB5500_IT_SOURCE21_REG 0x35 -#define AB5500_IT_SOURCE22_REG 0x36 -#define AB5500_IT_SOURCE23_REG 0x37 - -#define AB5500_NUM_IRQ_REGS 23 - -/** - * struct ab5500 - * @access_mutex: lock out concurrent accesses to the AB registers - * @dev: a pointer to the device struct for this chip driver - * @ab5500_irq: the analog baseband irq - * @irq_base: the platform configuration irq base for subdevices - * @chip_name: name of this chip variant - * @chip_id: 8 bit chip ID for this chip variant - * @irq_lock: a lock to protect the mask - * @abb_events: a local bit mask of the prcmu wakeup events - * @event_mask: a local copy of the mask event registers - * @last_event_mask: a copy of the last event_mask written to hardware - * @startup_events: a copy of the first reading of the event registers - * @startup_events_read: whether the first events have been read - */ -struct ab5500 { - struct mutex access_mutex; - struct device *dev; - unsigned int ab5500_irq; - unsigned int irq_base; - char chip_name[32]; - u8 chip_id; - struct mutex irq_lock; - u32 abb_events; - u8 mask[AB5500_NUM_IRQ_REGS]; - u8 oldmask[AB5500_NUM_IRQ_REGS]; - u8 startup_events[AB5500_NUM_IRQ_REGS]; - bool startup_events_read; -#ifdef CONFIG_DEBUG_FS - unsigned int debug_bank; - unsigned int debug_address; -#endif -}; - -struct ab5500_platform_data { - struct {unsigned int base; unsigned int count; } irq; - void *dev_data[AB5500_NUM_DEVICES]; - struct abx500_init_settings *init_settings; - unsigned int init_settings_sz; - bool pm_power_off; -}; - -#endif /* MFD_AB5500_H */ diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h deleted file mode 100644 index 838c6b487cc5..000000000000 --- a/include/linux/mfd/ab8500.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Srinidhi Kasagar - */ -#ifndef MFD_AB8500_H -#define MFD_AB8500_H - -#include - -/* - * AB8500 bank addresses - */ -#define AB8500_SYS_CTRL1_BLOCK 0x1 -#define AB8500_SYS_CTRL2_BLOCK 0x2 -#define AB8500_REGU_CTRL1 0x3 -#define AB8500_REGU_CTRL2 0x4 -#define AB8500_USB 0x5 -#define AB8500_TVOUT 0x6 -#define AB8500_DBI 0x7 -#define AB8500_ECI_AV_ACC 0x8 -#define AB8500_RESERVED 0x9 -#define AB8500_GPADC 0xA -#define AB8500_CHARGER 0xB -#define AB8500_GAS_GAUGE 0xC -#define AB8500_AUDIO 0xD -#define AB8500_INTERRUPT 0xE -#define AB8500_RTC 0xF -#define AB8500_MISC 0x10 -#define AB8500_DEVELOPMENT 0x11 -#define AB8500_DEBUG 0x12 -#define AB8500_PROD_TEST 0x13 -#define AB8500_OTP_EMUL 0x15 - -/* - * Interrupts - */ - -#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 -#define AB8500_INT_UN_PLUG_TV_DET 1 -#define AB8500_INT_PLUG_TV_DET 2 -#define AB8500_INT_TEMP_WARM 3 -#define AB8500_INT_PON_KEY2DB_F 4 -#define AB8500_INT_PON_KEY2DB_R 5 -#define AB8500_INT_PON_KEY1DB_F 6 -#define AB8500_INT_PON_KEY1DB_R 7 -#define AB8500_INT_BATT_OVV 8 -#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 -#define AB8500_INT_MAIN_CH_PLUG_DET 11 -#define AB8500_INT_USB_ID_DET_F 12 -#define AB8500_INT_USB_ID_DET_R 13 -#define AB8500_INT_VBUS_DET_F 14 -#define AB8500_INT_VBUS_DET_R 15 -#define AB8500_INT_VBUS_CH_DROP_END 16 -#define AB8500_INT_RTC_60S 17 -#define AB8500_INT_RTC_ALARM 18 -#define AB8500_INT_BAT_CTRL_INDB 20 -#define AB8500_INT_CH_WD_EXP 21 -#define AB8500_INT_VBUS_OVV 22 -#define AB8500_INT_MAIN_CH_DROP_END 23 -#define AB8500_INT_CCN_CONV_ACC 24 -#define AB8500_INT_INT_AUD 25 -#define AB8500_INT_CCEOC 26 -#define AB8500_INT_CC_INT_CALIB 27 -#define AB8500_INT_LOW_BAT_F 28 -#define AB8500_INT_LOW_BAT_R 29 -#define AB8500_INT_BUP_CHG_NOT_OK 30 -#define AB8500_INT_BUP_CHG_OK 31 -#define AB8500_INT_GP_HW_ADC_CONV_END 32 -#define AB8500_INT_ACC_DETECT_1DB_F 33 -#define AB8500_INT_ACC_DETECT_1DB_R 34 -#define AB8500_INT_ACC_DETECT_22DB_F 35 -#define AB8500_INT_ACC_DETECT_22DB_R 36 -#define AB8500_INT_ACC_DETECT_21DB_F 37 -#define AB8500_INT_ACC_DETECT_21DB_R 38 -#define AB8500_INT_GP_SW_ADC_CONV_END 39 -#define AB8500_INT_GPIO6R 40 -#define AB8500_INT_GPIO7R 41 -#define AB8500_INT_GPIO8R 42 -#define AB8500_INT_GPIO9R 43 -#define AB8500_INT_GPIO10R 44 -#define AB8500_INT_GPIO11R 45 -#define AB8500_INT_GPIO12R 46 -#define AB8500_INT_GPIO13R 47 -#define AB8500_INT_GPIO24R 48 -#define AB8500_INT_GPIO25R 49 -#define AB8500_INT_GPIO36R 50 -#define AB8500_INT_GPIO37R 51 -#define AB8500_INT_GPIO38R 52 -#define AB8500_INT_GPIO39R 53 -#define AB8500_INT_GPIO40R 54 -#define AB8500_INT_GPIO41R 55 -#define AB8500_INT_GPIO6F 56 -#define AB8500_INT_GPIO7F 57 -#define AB8500_INT_GPIO8F 58 -#define AB8500_INT_GPIO9F 59 -#define AB8500_INT_GPIO10F 60 -#define AB8500_INT_GPIO11F 61 -#define AB8500_INT_GPIO12F 62 -#define AB8500_INT_GPIO13F 63 -#define AB8500_INT_GPIO24F 64 -#define AB8500_INT_GPIO25F 65 -#define AB8500_INT_GPIO36F 66 -#define AB8500_INT_GPIO37F 67 -#define AB8500_INT_GPIO38F 68 -#define AB8500_INT_GPIO39F 69 -#define AB8500_INT_GPIO40F 70 -#define AB8500_INT_GPIO41F 71 -#define AB8500_INT_ADP_SOURCE_ERROR 72 -#define AB8500_INT_ADP_SINK_ERROR 73 -#define AB8500_INT_ADP_PROBE_PLUG 74 -#define AB8500_INT_ADP_PROBE_UNPLUG 75 -#define AB8500_INT_ADP_SENSE_OFF 76 -#define AB8500_INT_USB_PHY_POWER_ERR 78 -#define AB8500_INT_USB_LINK_STATUS 79 -#define AB8500_INT_BTEMP_LOW 80 -#define AB8500_INT_BTEMP_LOW_MEDIUM 81 -#define AB8500_INT_BTEMP_MEDIUM_HIGH 82 -#define AB8500_INT_BTEMP_HIGH 83 -#define AB8500_INT_USB_CHARGER_NOT_OK 89 -#define AB8500_INT_ID_WAKEUP_R 90 -#define AB8500_INT_ID_DET_R1R 92 -#define AB8500_INT_ID_DET_R2R 93 -#define AB8500_INT_ID_DET_R3R 94 -#define AB8500_INT_ID_DET_R4R 95 -#define AB8500_INT_ID_WAKEUP_F 96 -#define AB8500_INT_ID_DET_R1F 98 -#define AB8500_INT_ID_DET_R2F 99 -#define AB8500_INT_ID_DET_R3F 100 -#define AB8500_INT_ID_DET_R4F 101 -#define AB8500_INT_USB_CHG_DET_DONE 102 -#define AB8500_INT_USB_CH_TH_PROT_F 104 -#define AB8500_INT_USB_CH_TH_PROT_R 105 -#define AB8500_INT_MAIN_CH_TH_PROT_F 106 -#define AB8500_INT_MAIN_CH_TH_PROT_R 107 -#define AB8500_INT_USB_CHARGER_NOT_OKF 111 - -#define AB8500_NR_IRQS 112 -#define AB8500_NUM_IRQ_REGS 14 - -/** - * struct ab8500 - ab8500 internal structure - * @dev: parent device - * @lock: read/write operations lock - * @irq_lock: genirq bus lock - * @irq: irq line - * @chip_id: chip revision id - * @write: register write - * @read: register read - * @rx_buf: rx buf for SPI - * @tx_buf: tx buf for SPI - * @mask: cache of IRQ regs for bus lock - * @oldmask: cache of previous IRQ regs for bus lock - */ -struct ab8500 { - struct device *dev; - struct mutex lock; - struct mutex irq_lock; - - int irq_base; - int irq; - u8 chip_id; - - int (*write) (struct ab8500 *a8500, u16 addr, u8 data); - int (*read) (struct ab8500 *a8500, u16 addr); - - unsigned long tx_buf[4]; - unsigned long rx_buf[4]; - - u8 mask[AB8500_NUM_IRQ_REGS]; - u8 oldmask[AB8500_NUM_IRQ_REGS]; -}; - -struct regulator_reg_init; -struct regulator_init_data; -struct ab8500_gpio_platform_data; - -/** - * struct ab8500_platform_data - AB8500 platform data - * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used - * @init: board-specific initialization after detection of ab8500 - * @num_regulator_reg_init: number of regulator init registers - * @regulator_reg_init: regulator init registers - * @num_regulator: number of regulators - * @regulator: machine-specific constraints for regulators - */ -struct ab8500_platform_data { - int irq_base; - void (*init) (struct ab8500 *); - int num_regulator_reg_init; - struct ab8500_regulator_reg_init *regulator_reg_init; - int num_regulator; - struct regulator_init_data *regulator; - struct ab8500_gpio_platform_data *gpio; -}; - -extern int __devinit ab8500_init(struct ab8500 *ab8500); -extern int __devexit ab8500_exit(struct ab8500 *ab8500); - -#endif /* MFD_AB8500_H */ diff --git a/include/linux/mfd/ab8500/gpadc.h b/include/linux/mfd/ab8500/gpadc.h deleted file mode 100644 index 252966769d93..000000000000 --- a/include/linux/mfd/ab8500/gpadc.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2010 ST-Ericsson SA - * Licensed under GPLv2. - * - * Author: Arun R Murthy - * Author: Daniel Willerud - */ - -#ifndef _AB8500_GPADC_H -#define _AB8500_GPADC_H - -/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ -#define BAT_CTRL 0x01 -#define BTEMP_BALL 0x02 -#define MAIN_CHARGER_V 0x03 -#define ACC_DETECT1 0x04 -#define ACC_DETECT2 0x05 -#define ADC_AUX1 0x06 -#define ADC_AUX2 0x07 -#define MAIN_BAT_V 0x08 -#define VBUS_V 0x09 -#define MAIN_CHARGER_C 0x0A -#define USB_CHARGER_C 0x0B -#define BK_BAT_V 0x0C -#define DIE_TEMP 0x0D - -struct ab8500_gpadc; - -struct ab8500_gpadc *ab8500_gpadc_get(char *name); -int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel); -int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel); -int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, - u8 channel, int ad_value); - -#endif /* _AB8500_GPADC_H */ diff --git a/include/linux/mfd/ab8500/gpio.h b/include/linux/mfd/ab8500/gpio.h deleted file mode 100644 index 488a8c920a29..000000000000 --- a/include/linux/mfd/ab8500/gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright ST-Ericsson 2010. - * - * Author: Bibek Basu - * Licensed under GPLv2. - */ - -#ifndef _AB8500_GPIO_H -#define _AB8500_GPIO_H - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ - -struct ab8500_gpio_platform_data { - int gpio_base; - u32 irq_base; - u8 config_reg[7]; -}; - -#endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/ab8500/sysctrl.h b/include/linux/mfd/ab8500/sysctrl.h deleted file mode 100644 index 10da0291f8f8..000000000000 --- a/include/linux/mfd/ab8500/sysctrl.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Mattias Nilsson for ST Ericsson. - * License terms: GNU General Public License (GPL) version 2 - */ -#ifndef __AB8500_SYSCTRL_H -#define __AB8500_SYSCTRL_H - -#include - -#ifdef CONFIG_AB8500_CORE - -int ab8500_sysctrl_read(u16 reg, u8 *value); -int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); - -#else - -static inline int ab8500_sysctrl_read(u16 reg, u8 *value) -{ - return 0; -} - -static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) -{ - return 0; -} - -#endif /* CONFIG_AB8500_CORE */ - -static inline int ab8500_sysctrl_set(u16 reg, u8 bits) -{ - return ab8500_sysctrl_write(reg, bits, bits); -} - -static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) -{ - return ab8500_sysctrl_write(reg, bits, 0); -} - -/* Registers */ -#define AB8500_TURNONSTATUS 0x100 -#define AB8500_RESETSTATUS 0x101 -#define AB8500_PONKEY1PRESSSTATUS 0x102 -#define AB8500_SYSCLKREQSTATUS 0x142 -#define AB8500_STW4500CTRL1 0x180 -#define AB8500_STW4500CTRL2 0x181 -#define AB8500_STW4500CTRL3 0x200 -#define AB8500_MAINWDOGCTRL 0x201 -#define AB8500_MAINWDOGTIMER 0x202 -#define AB8500_LOWBAT 0x203 -#define AB8500_BATTOK 0x204 -#define AB8500_SYSCLKTIMER 0x205 -#define AB8500_SMPSCLKCTRL 0x206 -#define AB8500_SMPSCLKSEL1 0x207 -#define AB8500_SMPSCLKSEL2 0x208 -#define AB8500_SMPSCLKSEL3 0x209 -#define AB8500_SYSULPCLKCONF 0x20A -#define AB8500_SYSULPCLKCTRL1 0x20B -#define AB8500_SYSCLKCTRL 0x20C -#define AB8500_SYSCLKREQ1VALID 0x20D -#define AB8500_SYSTEMCTRLSUP 0x20F -#define AB8500_SYSCLKREQ1RFCLKBUF 0x210 -#define AB8500_SYSCLKREQ2RFCLKBUF 0x211 -#define AB8500_SYSCLKREQ3RFCLKBUF 0x212 -#define AB8500_SYSCLKREQ4RFCLKBUF 0x213 -#define AB8500_SYSCLKREQ5RFCLKBUF 0x214 -#define AB8500_SYSCLKREQ6RFCLKBUF 0x215 -#define AB8500_SYSCLKREQ7RFCLKBUF 0x216 -#define AB8500_SYSCLKREQ8RFCLKBUF 0x217 -#define AB8500_DITHERCLKCTRL 0x220 -#define AB8500_SWATCTRL 0x230 -#define AB8500_HIQCLKCTRL 0x232 -#define AB8500_VSIMSYSCLKCTRL 0x233 - -/* Bits */ -#define AB8500_TURNONSTATUS_PORNVBAT BIT(0) -#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1) -#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2) -#define AB8500_TURNONSTATUS_RTCALARM BIT(3) -#define AB8500_TURNONSTATUS_MAINCHDET BIT(4) -#define AB8500_TURNONSTATUS_VBUSDET BIT(5) -#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6) - -#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0) -#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2) - -#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F -#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0 - -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7) - -#define AB8500_STW4500CTRL1_SWOFF BIT(0) -#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1) -#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2) - -#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0) -#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1) -#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2) -#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3) -#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4) -#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5) -#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6) -#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7) - -#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0) -#define AB8500_STW4500CTRL3_RESETAUDN BIT(1) -#define AB8500_STW4500CTRL3_RESETDENCN BIT(2) -#define AB8500_STW4500CTRL3_THSDENA BIT(3) - -#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0) -#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1) -#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4) - -#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F -#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0 - -#define AB8500_LOWBAT_LOWBATENA BIT(0) -#define AB8500_LOWBAT_LOWBAT_MASK 0x7E -#define AB8500_LOWBAT_LOWBAT_SHIFT 1 - -#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F -#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0 -#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0 -#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4 - -#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F -#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0 -#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0 -#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4 - -#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03 -#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0 -#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2) - -#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07 -#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0 -#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38 -#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3 - -#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07 -#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0 -#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38 -#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3 - -#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07 -#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0 -#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38 -#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3 - -#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03 -#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0 -#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2) -#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3) -#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4) -#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5) -#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6) -#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7) - -#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03 -#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0 -#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2) -#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3) -#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4) -#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5) -#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6) -#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7) - -#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0) -#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1) -#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2) - -#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0) -#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1) -#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2) - -#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03 -#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0 -#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C -#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2 -#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4) - -#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4) - -#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0) -#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1) -#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2) -#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3) -#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4) -#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5) -#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0 -#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6 - -#define AB8500_SWATCTRL_UPDATERF BIT(0) -#define AB8500_SWATCTRL_SWATENABLE BIT(1) -#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C -#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2 -#define AB8500_SWATCTRL_SWATBIT5 BIT(6) - -#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0) -#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1) -#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2) -#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3) -#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4) -#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5) -#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6) -#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7) - -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) - -#endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500/ab5500.h b/include/linux/mfd/abx500/ab5500.h new file mode 100644 index 000000000000..a720051ae933 --- /dev/null +++ b/include/linux/mfd/abx500/ab5500.h @@ -0,0 +1,140 @@ +/* + * Copyright (C) ST-Ericsson 2011 + * + * License Terms: GNU General Public License v2 + */ +#ifndef MFD_AB5500_H +#define MFD_AB5500_H + +#include + +enum ab5500_devid { + AB5500_DEVID_ADC, + AB5500_DEVID_LEDS, + AB5500_DEVID_POWER, + AB5500_DEVID_REGULATORS, + AB5500_DEVID_SIM, + AB5500_DEVID_RTC, + AB5500_DEVID_CHARGER, + AB5500_DEVID_FUELGAUGE, + AB5500_DEVID_VIBRATOR, + AB5500_DEVID_CODEC, + AB5500_DEVID_USB, + AB5500_DEVID_OTP, + AB5500_DEVID_VIDEO, + AB5500_DEVID_DBIECI, + AB5500_DEVID_ONSWA, + AB5500_NUM_DEVICES, +}; + +enum ab5500_banks { + AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0, + AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1, + AB5500_BANK_VDENC = 2, + AB5500_BANK_SIM_USBSIM = 3, + AB5500_BANK_LED = 4, + AB5500_BANK_ADC = 5, + AB5500_BANK_RTC = 6, + AB5500_BANK_STARTUP = 7, + AB5500_BANK_DBI_ECI = 8, + AB5500_BANK_CHG = 9, + AB5500_BANK_FG_BATTCOM_ACC = 10, + AB5500_BANK_USB = 11, + AB5500_BANK_IT = 12, + AB5500_BANK_VIBRA = 13, + AB5500_BANK_AUDIO_HEADSETUSB = 14, + AB5500_NUM_BANKS = 15, +}; + +enum ab5500_banks_addr { + AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A, + AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B, + AB5500_ADDR_VDENC = 0x06, + AB5500_ADDR_SIM_USBSIM = 0x04, + AB5500_ADDR_LED = 0x10, + AB5500_ADDR_ADC = 0x0A, + AB5500_ADDR_RTC = 0x0F, + AB5500_ADDR_STARTUP = 0x03, + AB5500_ADDR_DBI_ECI = 0x07, + AB5500_ADDR_CHG = 0x0B, + AB5500_ADDR_FG_BATTCOM_ACC = 0x0C, + AB5500_ADDR_USB = 0x05, + AB5500_ADDR_IT = 0x0E, + AB5500_ADDR_VIBRA = 0x02, + AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D, +}; + +/* + * Interrupt register offsets + * Bank : 0x0E + */ +#define AB5500_IT_SOURCE0_REG 0x20 +#define AB5500_IT_SOURCE1_REG 0x21 +#define AB5500_IT_SOURCE2_REG 0x22 +#define AB5500_IT_SOURCE3_REG 0x23 +#define AB5500_IT_SOURCE4_REG 0x24 +#define AB5500_IT_SOURCE5_REG 0x25 +#define AB5500_IT_SOURCE6_REG 0x26 +#define AB5500_IT_SOURCE7_REG 0x27 +#define AB5500_IT_SOURCE8_REG 0x28 +#define AB5500_IT_SOURCE9_REG 0x29 +#define AB5500_IT_SOURCE10_REG 0x2A +#define AB5500_IT_SOURCE11_REG 0x2B +#define AB5500_IT_SOURCE12_REG 0x2C +#define AB5500_IT_SOURCE13_REG 0x2D +#define AB5500_IT_SOURCE14_REG 0x2E +#define AB5500_IT_SOURCE15_REG 0x2F +#define AB5500_IT_SOURCE16_REG 0x30 +#define AB5500_IT_SOURCE17_REG 0x31 +#define AB5500_IT_SOURCE18_REG 0x32 +#define AB5500_IT_SOURCE19_REG 0x33 +#define AB5500_IT_SOURCE20_REG 0x34 +#define AB5500_IT_SOURCE21_REG 0x35 +#define AB5500_IT_SOURCE22_REG 0x36 +#define AB5500_IT_SOURCE23_REG 0x37 + +#define AB5500_NUM_IRQ_REGS 23 + +/** + * struct ab5500 + * @access_mutex: lock out concurrent accesses to the AB registers + * @dev: a pointer to the device struct for this chip driver + * @ab5500_irq: the analog baseband irq + * @irq_base: the platform configuration irq base for subdevices + * @chip_name: name of this chip variant + * @chip_id: 8 bit chip ID for this chip variant + * @irq_lock: a lock to protect the mask + * @abb_events: a local bit mask of the prcmu wakeup events + * @event_mask: a local copy of the mask event registers + * @last_event_mask: a copy of the last event_mask written to hardware + * @startup_events: a copy of the first reading of the event registers + * @startup_events_read: whether the first events have been read + */ +struct ab5500 { + struct mutex access_mutex; + struct device *dev; + unsigned int ab5500_irq; + unsigned int irq_base; + char chip_name[32]; + u8 chip_id; + struct mutex irq_lock; + u32 abb_events; + u8 mask[AB5500_NUM_IRQ_REGS]; + u8 oldmask[AB5500_NUM_IRQ_REGS]; + u8 startup_events[AB5500_NUM_IRQ_REGS]; + bool startup_events_read; +#ifdef CONFIG_DEBUG_FS + unsigned int debug_bank; + unsigned int debug_address; +#endif +}; + +struct ab5500_platform_data { + struct {unsigned int base; unsigned int count; } irq; + void *dev_data[AB5500_NUM_DEVICES]; + struct abx500_init_settings *init_settings; + unsigned int init_settings_sz; + bool pm_power_off; +}; + +#endif /* MFD_AB5500_H */ diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h new file mode 100644 index 000000000000..252966769d93 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-gpadc.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2010 ST-Ericsson SA + * Licensed under GPLv2. + * + * Author: Arun R Murthy + * Author: Daniel Willerud + */ + +#ifndef _AB8500_GPADC_H +#define _AB8500_GPADC_H + +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D + +struct ab8500_gpadc; + +struct ab8500_gpadc *ab8500_gpadc_get(char *name); +int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel); +int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel); +int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, + u8 channel, int ad_value); + +#endif /* _AB8500_GPADC_H */ diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h new file mode 100644 index 000000000000..488a8c920a29 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-gpio.h @@ -0,0 +1,21 @@ +/* + * Copyright ST-Ericsson 2010. + * + * Author: Bibek Basu + * Licensed under GPLv2. + */ + +#ifndef _AB8500_GPIO_H +#define _AB8500_GPIO_H + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ + +struct ab8500_gpio_platform_data { + int gpio_base; + u32 irq_base; + u8 config_reg[7]; +}; + +#endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h new file mode 100644 index 000000000000..10da0291f8f8 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -0,0 +1,254 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Mattias Nilsson for ST Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __AB8500_SYSCTRL_H +#define __AB8500_SYSCTRL_H + +#include + +#ifdef CONFIG_AB8500_CORE + +int ab8500_sysctrl_read(u16 reg, u8 *value); +int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); + +#else + +static inline int ab8500_sysctrl_read(u16 reg, u8 *value) +{ + return 0; +} + +static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) +{ + return 0; +} + +#endif /* CONFIG_AB8500_CORE */ + +static inline int ab8500_sysctrl_set(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, bits); +} + +static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, 0); +} + +/* Registers */ +#define AB8500_TURNONSTATUS 0x100 +#define AB8500_RESETSTATUS 0x101 +#define AB8500_PONKEY1PRESSSTATUS 0x102 +#define AB8500_SYSCLKREQSTATUS 0x142 +#define AB8500_STW4500CTRL1 0x180 +#define AB8500_STW4500CTRL2 0x181 +#define AB8500_STW4500CTRL3 0x200 +#define AB8500_MAINWDOGCTRL 0x201 +#define AB8500_MAINWDOGTIMER 0x202 +#define AB8500_LOWBAT 0x203 +#define AB8500_BATTOK 0x204 +#define AB8500_SYSCLKTIMER 0x205 +#define AB8500_SMPSCLKCTRL 0x206 +#define AB8500_SMPSCLKSEL1 0x207 +#define AB8500_SMPSCLKSEL2 0x208 +#define AB8500_SMPSCLKSEL3 0x209 +#define AB8500_SYSULPCLKCONF 0x20A +#define AB8500_SYSULPCLKCTRL1 0x20B +#define AB8500_SYSCLKCTRL 0x20C +#define AB8500_SYSCLKREQ1VALID 0x20D +#define AB8500_SYSTEMCTRLSUP 0x20F +#define AB8500_SYSCLKREQ1RFCLKBUF 0x210 +#define AB8500_SYSCLKREQ2RFCLKBUF 0x211 +#define AB8500_SYSCLKREQ3RFCLKBUF 0x212 +#define AB8500_SYSCLKREQ4RFCLKBUF 0x213 +#define AB8500_SYSCLKREQ5RFCLKBUF 0x214 +#define AB8500_SYSCLKREQ6RFCLKBUF 0x215 +#define AB8500_SYSCLKREQ7RFCLKBUF 0x216 +#define AB8500_SYSCLKREQ8RFCLKBUF 0x217 +#define AB8500_DITHERCLKCTRL 0x220 +#define AB8500_SWATCTRL 0x230 +#define AB8500_HIQCLKCTRL 0x232 +#define AB8500_VSIMSYSCLKCTRL 0x233 + +/* Bits */ +#define AB8500_TURNONSTATUS_PORNVBAT BIT(0) +#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1) +#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2) +#define AB8500_TURNONSTATUS_RTCALARM BIT(3) +#define AB8500_TURNONSTATUS_MAINCHDET BIT(4) +#define AB8500_TURNONSTATUS_VBUSDET BIT(5) +#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6) + +#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0) +#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2) + +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0 + +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7) + +#define AB8500_STW4500CTRL1_SWOFF BIT(0) +#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1) +#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2) + +#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0) +#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1) +#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2) +#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6) +#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7) + +#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0) +#define AB8500_STW4500CTRL3_RESETAUDN BIT(1) +#define AB8500_STW4500CTRL3_RESETDENCN BIT(2) +#define AB8500_STW4500CTRL3_THSDENA BIT(3) + +#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0) +#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1) +#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4) + +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0 + +#define AB8500_LOWBAT_LOWBATENA BIT(0) +#define AB8500_LOWBAT_LOWBAT_MASK 0x7E +#define AB8500_LOWBAT_LOWBAT_SHIFT 1 + +#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F +#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0 +#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0 +#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4 + +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4 + +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03 +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0 +#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2) + +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3 + +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03 +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0 +#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2) +#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3) +#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4) +#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5) +#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6) +#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7) + +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03 +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0 +#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2) +#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3) +#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7) + +#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0) +#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1) +#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2) + +#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0) +#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1) +#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2) + +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03 +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0 +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2 +#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4) + +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4) + +#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0) +#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1) +#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2) +#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3) +#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4) +#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5) +#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0 +#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6 + +#define AB8500_SWATCTRL_UPDATERF BIT(0) +#define AB8500_SWATCTRL_SWATENABLE BIT(1) +#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C +#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2 +#define AB8500_SWATCTRL_SWATBIT5 BIT(6) + +#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0) +#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1) +#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2) +#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3) +#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4) +#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5) +#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6) +#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7) + +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) + +#endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h new file mode 100644 index 000000000000..838c6b487cc5 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500.h @@ -0,0 +1,201 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Srinidhi Kasagar + */ +#ifndef MFD_AB8500_H +#define MFD_AB8500_H + +#include + +/* + * AB8500 bank addresses + */ +#define AB8500_SYS_CTRL1_BLOCK 0x1 +#define AB8500_SYS_CTRL2_BLOCK 0x2 +#define AB8500_REGU_CTRL1 0x3 +#define AB8500_REGU_CTRL2 0x4 +#define AB8500_USB 0x5 +#define AB8500_TVOUT 0x6 +#define AB8500_DBI 0x7 +#define AB8500_ECI_AV_ACC 0x8 +#define AB8500_RESERVED 0x9 +#define AB8500_GPADC 0xA +#define AB8500_CHARGER 0xB +#define AB8500_GAS_GAUGE 0xC +#define AB8500_AUDIO 0xD +#define AB8500_INTERRUPT 0xE +#define AB8500_RTC 0xF +#define AB8500_MISC 0x10 +#define AB8500_DEVELOPMENT 0x11 +#define AB8500_DEBUG 0x12 +#define AB8500_PROD_TEST 0x13 +#define AB8500_OTP_EMUL 0x15 + +/* + * Interrupts + */ + +#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 +#define AB8500_INT_UN_PLUG_TV_DET 1 +#define AB8500_INT_PLUG_TV_DET 2 +#define AB8500_INT_TEMP_WARM 3 +#define AB8500_INT_PON_KEY2DB_F 4 +#define AB8500_INT_PON_KEY2DB_R 5 +#define AB8500_INT_PON_KEY1DB_F 6 +#define AB8500_INT_PON_KEY1DB_R 7 +#define AB8500_INT_BATT_OVV 8 +#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 +#define AB8500_INT_MAIN_CH_PLUG_DET 11 +#define AB8500_INT_USB_ID_DET_F 12 +#define AB8500_INT_USB_ID_DET_R 13 +#define AB8500_INT_VBUS_DET_F 14 +#define AB8500_INT_VBUS_DET_R 15 +#define AB8500_INT_VBUS_CH_DROP_END 16 +#define AB8500_INT_RTC_60S 17 +#define AB8500_INT_RTC_ALARM 18 +#define AB8500_INT_BAT_CTRL_INDB 20 +#define AB8500_INT_CH_WD_EXP 21 +#define AB8500_INT_VBUS_OVV 22 +#define AB8500_INT_MAIN_CH_DROP_END 23 +#define AB8500_INT_CCN_CONV_ACC 24 +#define AB8500_INT_INT_AUD 25 +#define AB8500_INT_CCEOC 26 +#define AB8500_INT_CC_INT_CALIB 27 +#define AB8500_INT_LOW_BAT_F 28 +#define AB8500_INT_LOW_BAT_R 29 +#define AB8500_INT_BUP_CHG_NOT_OK 30 +#define AB8500_INT_BUP_CHG_OK 31 +#define AB8500_INT_GP_HW_ADC_CONV_END 32 +#define AB8500_INT_ACC_DETECT_1DB_F 33 +#define AB8500_INT_ACC_DETECT_1DB_R 34 +#define AB8500_INT_ACC_DETECT_22DB_F 35 +#define AB8500_INT_ACC_DETECT_22DB_R 36 +#define AB8500_INT_ACC_DETECT_21DB_F 37 +#define AB8500_INT_ACC_DETECT_21DB_R 38 +#define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_GPIO6R 40 +#define AB8500_INT_GPIO7R 41 +#define AB8500_INT_GPIO8R 42 +#define AB8500_INT_GPIO9R 43 +#define AB8500_INT_GPIO10R 44 +#define AB8500_INT_GPIO11R 45 +#define AB8500_INT_GPIO12R 46 +#define AB8500_INT_GPIO13R 47 +#define AB8500_INT_GPIO24R 48 +#define AB8500_INT_GPIO25R 49 +#define AB8500_INT_GPIO36R 50 +#define AB8500_INT_GPIO37R 51 +#define AB8500_INT_GPIO38R 52 +#define AB8500_INT_GPIO39R 53 +#define AB8500_INT_GPIO40R 54 +#define AB8500_INT_GPIO41R 55 +#define AB8500_INT_GPIO6F 56 +#define AB8500_INT_GPIO7F 57 +#define AB8500_INT_GPIO8F 58 +#define AB8500_INT_GPIO9F 59 +#define AB8500_INT_GPIO10F 60 +#define AB8500_INT_GPIO11F 61 +#define AB8500_INT_GPIO12F 62 +#define AB8500_INT_GPIO13F 63 +#define AB8500_INT_GPIO24F 64 +#define AB8500_INT_GPIO25F 65 +#define AB8500_INT_GPIO36F 66 +#define AB8500_INT_GPIO37F 67 +#define AB8500_INT_GPIO38F 68 +#define AB8500_INT_GPIO39F 69 +#define AB8500_INT_GPIO40F 70 +#define AB8500_INT_GPIO41F 71 +#define AB8500_INT_ADP_SOURCE_ERROR 72 +#define AB8500_INT_ADP_SINK_ERROR 73 +#define AB8500_INT_ADP_PROBE_PLUG 74 +#define AB8500_INT_ADP_PROBE_UNPLUG 75 +#define AB8500_INT_ADP_SENSE_OFF 76 +#define AB8500_INT_USB_PHY_POWER_ERR 78 +#define AB8500_INT_USB_LINK_STATUS 79 +#define AB8500_INT_BTEMP_LOW 80 +#define AB8500_INT_BTEMP_LOW_MEDIUM 81 +#define AB8500_INT_BTEMP_MEDIUM_HIGH 82 +#define AB8500_INT_BTEMP_HIGH 83 +#define AB8500_INT_USB_CHARGER_NOT_OK 89 +#define AB8500_INT_ID_WAKEUP_R 90 +#define AB8500_INT_ID_DET_R1R 92 +#define AB8500_INT_ID_DET_R2R 93 +#define AB8500_INT_ID_DET_R3R 94 +#define AB8500_INT_ID_DET_R4R 95 +#define AB8500_INT_ID_WAKEUP_F 96 +#define AB8500_INT_ID_DET_R1F 98 +#define AB8500_INT_ID_DET_R2F 99 +#define AB8500_INT_ID_DET_R3F 100 +#define AB8500_INT_ID_DET_R4F 101 +#define AB8500_INT_USB_CHG_DET_DONE 102 +#define AB8500_INT_USB_CH_TH_PROT_F 104 +#define AB8500_INT_USB_CH_TH_PROT_R 105 +#define AB8500_INT_MAIN_CH_TH_PROT_F 106 +#define AB8500_INT_MAIN_CH_TH_PROT_R 107 +#define AB8500_INT_USB_CHARGER_NOT_OKF 111 + +#define AB8500_NR_IRQS 112 +#define AB8500_NUM_IRQ_REGS 14 + +/** + * struct ab8500 - ab8500 internal structure + * @dev: parent device + * @lock: read/write operations lock + * @irq_lock: genirq bus lock + * @irq: irq line + * @chip_id: chip revision id + * @write: register write + * @read: register read + * @rx_buf: rx buf for SPI + * @tx_buf: tx buf for SPI + * @mask: cache of IRQ regs for bus lock + * @oldmask: cache of previous IRQ regs for bus lock + */ +struct ab8500 { + struct device *dev; + struct mutex lock; + struct mutex irq_lock; + + int irq_base; + int irq; + u8 chip_id; + + int (*write) (struct ab8500 *a8500, u16 addr, u8 data); + int (*read) (struct ab8500 *a8500, u16 addr); + + unsigned long tx_buf[4]; + unsigned long rx_buf[4]; + + u8 mask[AB8500_NUM_IRQ_REGS]; + u8 oldmask[AB8500_NUM_IRQ_REGS]; +}; + +struct regulator_reg_init; +struct regulator_init_data; +struct ab8500_gpio_platform_data; + +/** + * struct ab8500_platform_data - AB8500 platform data + * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used + * @init: board-specific initialization after detection of ab8500 + * @num_regulator_reg_init: number of regulator init registers + * @regulator_reg_init: regulator init registers + * @num_regulator: number of regulators + * @regulator: machine-specific constraints for regulators + */ +struct ab8500_platform_data { + int irq_base; + void (*init) (struct ab8500 *); + int num_regulator_reg_init; + struct ab8500_regulator_reg_init *regulator_reg_init; + int num_regulator; + struct regulator_init_data *regulator; + struct ab8500_gpio_platform_data *gpio; +}; + +extern int __devinit ab8500_init(struct ab8500 *ab8500); +extern int __devexit ab8500_exit(struct ab8500 *ab8500); + +#endif /* MFD_AB8500_H */ -- cgit v1.2.3 From 71e58782d2e054798f91473f5452ffe65e2a5ff8 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Thu, 15 Dec 2011 18:20:47 +0900 Subject: misc: Remove max8997-muic sysfs attributes The 'switch' sysfs attribute is used for showing and setting the switch state of the device. However, setting it from the userspace focibly is not appropriate. And showing the state can be handled from other places (e.g. external connector) in a unified manner. This patch removes the sysfs attribute. Plus, uevent messages for interrupts are also removed. The initial max8997-muic driver is merged at: git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git for-next Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Greg Kroah-Hartman Signed-off-by: Samuel Ortiz --- drivers/misc/max8997-muic.c | 137 ++------------------------------------------ 1 file changed, 4 insertions(+), 133 deletions(-) (limited to 'drivers/misc') diff --git a/drivers/misc/max8997-muic.c b/drivers/misc/max8997-muic.c index 74a9448a93d2..d74ef41aabd5 100644 --- a/drivers/misc/max8997-muic.c +++ b/drivers/misc/max8997-muic.c @@ -307,11 +307,8 @@ static void max8997_muic_irq_work(struct work_struct *work) struct max8997_muic_info, irq_work); struct max8997_platform_data *pdata = dev_get_platdata(info->iodev->dev); - char env_name_str[30], env_state_str[15]; - char *envp[] = { env_name_str, env_state_str, NULL }; u8 status[3]; - u8 adc, adc_low, adc_err; - u8 vb_volt, db_chg, dcd_tmr, cdr, chg_type, ovp; + u8 adc, chg_type; int irq_type = info->irq - pdata->irq_base; int ret; @@ -330,72 +327,24 @@ static void max8997_muic_irq_work(struct work_struct *work) status[0], status[1]); switch (irq_type) { - case MAX8997_MUICIRQ_ADCError: - adc_err = status[0] & STATUS1_ADCERR_MASK; - adc_err >>= STATUS1_ADCERR_SHIFT; - sprintf(env_name_str, "IRQ=%s", "ADC_Error"); - sprintf(env_state_str, "STATE=%d", adc_err); - break; - case MAX8997_MUICIRQ_ADCLow: - adc_low = status[0] & STATUS1_ADCLOW_MASK; - adc_low >>= STATUS1_ADCLOW_SHIFT; - sprintf(env_name_str, "IRQ=%s", "ADC_Low"); - sprintf(env_state_str, "STATE=%d", adc_low); - break; case MAX8997_MUICIRQ_ADC: adc = status[0] & STATUS1_ADC_MASK; adc >>= STATUS1_ADC_SHIFT; max8997_muic_handle_adc(info, adc); - - sprintf(env_name_str, "IRQ=%s", "ADC"); - sprintf(env_state_str, "STATE=%d", adc); - break; - case MAX8997_MUICIRQ_VBVolt: - vb_volt = status[1] & STATUS2_VBVOLT_MASK; - vb_volt >>= STATUS2_VBVOLT_SHIFT; - sprintf(env_name_str, "IRQ=%s", "VB_Volt"); - sprintf(env_state_str, "STATE=%d", vb_volt); - break; - case MAX8997_MUICIRQ_DBChg: - db_chg = status[1] & STATUS2_DBCHG_MASK; - db_chg >>= STATUS2_DBCHG_SHIFT; - sprintf(env_name_str, "IRQ=%s", "DB_CHARGER"); - sprintf(env_state_str, "STATE=%d", db_chg); - break; - case MAX8997_MUICIRQ_DCDTmr: - dcd_tmr = status[1] & STATUS2_DCDTMR_MASK; - dcd_tmr >>= STATUS2_DCDTMR_SHIFT; - sprintf(env_name_str, "IRQ=%s", "DCD_TIMER"); - sprintf(env_state_str, "STATE=%d", dcd_tmr); - break; - case MAX8997_MUICIRQ_ChgDetRun: - cdr = status[1] & STATUS2_CHGDETRUN_MASK; - cdr >>= STATUS2_CHGDETRUN_SHIFT; - sprintf(env_name_str, "IRQ=%s", "CHG_DET_RUN"); - sprintf(env_state_str, "STATE=%d", cdr); break; case MAX8997_MUICIRQ_ChgTyp: chg_type = status[1] & STATUS2_CHGTYP_MASK; chg_type >>= STATUS2_CHGTYP_SHIFT; max8997_muic_handle_charger_type(info, chg_type); - - sprintf(env_name_str, "IRQ=%s", "CHARGER_TYPE"); - sprintf(env_state_str, "STATE=%d", chg_type); - break; - case MAX8997_MUICIRQ_OVP: - ovp = status[2] & STATUS3_OVP_MASK; - ovp >>= STATUS3_OVP_SHIFT; - sprintf(env_name_str, "IRQ=%s", "OVER-VOLTAGE"); - sprintf(env_state_str, "STATE=%d", ovp); break; default: + dev_info(info->dev, "misc interrupt: %s occurred\n", + muic_irqs[irq_type].name); break; } - kobject_uevent_env(&info->dev->kobj, KOBJ_CHANGE, envp); - mutex_unlock(&info->mutex); return; @@ -438,74 +387,6 @@ static void max8997_muic_detect_dev(struct max8997_muic_info *info) max8997_muic_handle_charger_type(info, chg_type); } -static ssize_t max8997_muic_show_manualsw(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct max8997_muic_info *info = dev_get_drvdata(dev); - int ret; - u8 value, manual_switch; - - ret = max8997_read_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, &value); - if (ret) { - dev_err(info->dev, "failed to read muic register\n"); - return sprintf(buf, "UNKNOWN\n"); - } - - manual_switch = value & (COMN1SW_MASK | COMP2SW_MASK); - - switch (manual_switch) { - case MAX8997_SW_USB: - return sprintf(buf, "USB\n"); - case MAX8997_SW_AUDIO: - return sprintf(buf, "AUDIO\n"); - case MAX8997_SW_UART: - return sprintf(buf, "UART\n"); - default: - return sprintf(buf, "OPEN\n"); - } -} - -static ssize_t max8997_muic_store_manualsw(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct max8997_muic_info *info = dev_get_drvdata(dev); - int ret; - u8 manual_switch; - - if (!strncmp(buf, "USB", 3)) { - manual_switch = MAX8997_SW_USB; - } else if (!strncmp(buf, "AUDIO", 5)) { - manual_switch = MAX8997_SW_AUDIO; - } else if (!strncmp(buf, "UART", 4)) { - manual_switch = MAX8997_SW_UART; - } else if (!strncmp(buf, "OPEN", 4)) { - manual_switch = MAX8997_SW_OPEN; - } else { - dev_err(info->dev, "invalid parameter\n"); - goto out; - } - - ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, - manual_switch, SW_MASK); - if (ret) - dev_err(info->dev, "failed to update muic register\n"); -out: - return count; -} - -static DEVICE_ATTR(switch, S_IRUGO | S_IWUSR, - max8997_muic_show_manualsw, max8997_muic_store_manualsw); - -static struct attribute *max8997_muic_attributes[] = { - &dev_attr_switch.attr, - NULL -}; - -static const struct attribute_group max8997_muic_group = { - .attrs = max8997_muic_attributes, -}; - static void max8997_initialize_device(struct max8997_muic_info *info) { struct max8997_muic_platform_data *mdata = info->muic_pdata; @@ -545,13 +426,6 @@ static int __devinit max8997_muic_probe(struct platform_device *pdev) platform_set_drvdata(pdev, info); mutex_init(&info->mutex); - ret = sysfs_create_group(&pdev->dev.kobj, &max8997_muic_group); - if (ret) { - dev_err(&pdev->dev, - "failed to create max8997 muic attribute group\n"); - goto err_sysfs; - } - INIT_WORK(&info->irq_work, max8997_muic_irq_work); for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) { @@ -583,8 +457,6 @@ static int __devinit max8997_muic_probe(struct platform_device *pdev) return ret; err_irq: - sysfs_remove_group(&pdev->dev.kobj, &max8997_muic_group); -err_sysfs: err_pdata: kfree(info); err_kfree: @@ -598,10 +470,9 @@ static int __devexit max8997_muic_remove(struct platform_device *pdev) dev_get_platdata(info->iodev->dev); int i; - sysfs_remove_group(&pdev->dev.kobj, &max8997_muic_group); - for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) free_irq(pdata->irq_base + muic_irqs[i].irq, info); + cancel_work_sync(&info->irq_work); kfree(info); -- cgit v1.2.3 From bafeafeab94b8d3019aac15c2df2ce47b08a6363 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:16 +1030 Subject: module_param: check type correctness for module_param_array module_param_array(), unlike its non-array cousins, didn't check the type of the variable. Fixing this found two bugs. Cc: Luca Risolia Cc: Mauro Carvalho Chehab Cc: Eric Piel Cc: linux-media@vger.kernel.org Signed-off-by: Rusty Russell --- drivers/media/video/et61x251/et61x251_core.c | 4 ++-- drivers/media/video/sn9c102/sn9c102_core.c | 4 ++-- drivers/mfd/janz-cmodio.c | 2 +- drivers/misc/lis3lv02d/lis3lv02d.c | 2 ++ include/linux/moduleparam.h | 1 + 5 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/misc') diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index 40f214ab924f..5539f09440ac 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -76,8 +76,8 @@ MODULE_PARM_DESC(video_nr, "\none and for every other camera." "\n"); -static short force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] = - ET61X251_FORCE_MUNMAP}; +static bool force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] = + ET61X251_FORCE_MUNMAP}; module_param_array(force_munmap, bool, NULL, 0444); MODULE_PARM_DESC(force_munmap, "\n<0|1[,...]> Force the application to unmap previously" diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 7025be129286..c2882fa5be85 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -75,8 +75,8 @@ MODULE_PARM_DESC(video_nr, "\none and for every other camera." "\n"); -static short force_munmap[] = {[0 ... SN9C102_MAX_DEVICES-1] = - SN9C102_FORCE_MUNMAP}; +static bool force_munmap[] = {[0 ... SN9C102_MAX_DEVICES-1] = + SN9C102_FORCE_MUNMAP}; module_param_array(force_munmap, bool, NULL, 0444); MODULE_PARM_DESC(force_munmap, " <0|1[,...]>" diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c index 5c2a06acb77f..a9223ed1b7c5 100644 --- a/drivers/mfd/janz-cmodio.c +++ b/drivers/mfd/janz-cmodio.c @@ -33,7 +33,7 @@ /* Module Parameters */ static unsigned int num_modules = CMODIO_MAX_MODULES; -static unsigned char *modules[CMODIO_MAX_MODULES] = { +static char *modules[CMODIO_MAX_MODULES] = { "empty", "empty", "empty", "empty", }; diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c index 29d12a70eb1b..a981e2a42f92 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d.c +++ b/drivers/misc/lis3lv02d/lis3lv02d.c @@ -111,6 +111,8 @@ static struct kernel_param_ops param_ops_axis = { .get = param_get_int, }; +#define param_check_axis(name, p) param_check_int(name, p) + module_param_array_named(axes, lis3_dev.ac.as_array, axis, NULL, 0644); MODULE_PARM_DESC(axes, "Axis-mapping for x,y,z directions"); diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 7939f636c8ba..794d4b0f1215 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -395,6 +395,7 @@ extern int param_get_invbool(char *buffer, const struct kernel_param *kp); * module_param_named() for why this might be necessary. */ #define module_param_array_named(name, array, type, nump, perm) \ + param_check_##type(name, &(array)[0]); \ static const struct kparam_array __param_arr_##name \ = { .max = ARRAY_SIZE(array), .num = nump, \ .ops = ¶m_ops_##type, \ -- cgit v1.2.3 From 90ab5ee94171b3e28de6bb42ee30b527014e0be7 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:20 +1030 Subject: module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab Signed-off-by: Rusty Russell --- drivers/accessibility/braille/braille_console.c | 2 +- drivers/acpi/acpica/acglobal.h | 2 +- drivers/acpi/apei/ghes.c | 2 +- drivers/acpi/apei/hest.c | 2 +- drivers/acpi/dock.c | 2 +- drivers/acpi/pci_slot.c | 2 +- drivers/acpi/video.c | 6 +++--- drivers/ata/sata_nv.c | 6 +++--- drivers/ata/sata_sil24.c | 2 +- drivers/atm/he.c | 6 +++--- drivers/block/drbd/drbd_int.h | 4 ++-- drivers/block/drbd/drbd_main.c | 4 ++-- drivers/block/paride/bpck6.c | 5 ++--- drivers/block/paride/pd.c | 3 ++- drivers/block/paride/pf.c | 4 +++- drivers/block/paride/pg.c | 3 ++- drivers/block/paride/pt.c | 4 +++- drivers/block/xd.c | 2 +- drivers/bluetooth/btusb.c | 12 ++++++------ drivers/bluetooth/hci_bcsp.c | 4 ++-- drivers/bluetooth/hci_ldisc.c | 2 +- drivers/cdrom/cdrom.c | 12 ++++++------ drivers/char/agp/amd64-agp.c | 2 +- drivers/char/agp/sis-agp.c | 2 +- drivers/char/i8k.c | 8 ++++---- drivers/char/ipmi/ipmi_si_intf.c | 2 +- drivers/char/lp.c | 2 +- drivers/char/nwflash.c | 2 +- drivers/char/pcmcia/synclink_cs.c | 2 +- drivers/char/random.c | 2 +- drivers/char/tpm/tpm_tis.c | 6 +++--- drivers/edac/r82600_edac.c | 2 +- drivers/firewire/sbp2.c | 2 +- drivers/hid/hid-prodikeys.c | 2 +- drivers/hwmon/abituguru.c | 2 +- drivers/hwmon/abituguru3.c | 4 ++-- drivers/hwmon/acpi_power_meter.c | 2 +- drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/ads7828.c | 4 ++-- drivers/hwmon/dme1737.c | 4 ++-- drivers/hwmon/it87.c | 4 ++-- drivers/hwmon/lm93.c | 4 ++-- drivers/hwmon/max1668.c | 2 +- drivers/hwmon/w83627hf.c | 2 +- drivers/hwmon/w83781d.c | 4 ++-- drivers/hwmon/w83791d.c | 4 ++-- drivers/hwmon/w83792d.c | 2 +- drivers/hwmon/w83793.c | 2 +- drivers/hwmon/w83795.c | 2 +- drivers/hwmon/w83l786ng.c | 2 +- drivers/i2c/busses/i2c-highlander.c | 2 +- drivers/i2c/busses/i2c-ibm_iic.c | 4 ++-- drivers/i2c/busses/i2c-sis630.c | 4 ++-- drivers/i2c/busses/i2c-viapro.c | 2 +- drivers/ide/ali14xx.c | 2 +- drivers/ide/cmd640.c | 2 +- drivers/ide/dtc2278.c | 2 +- drivers/ide/gayle.c | 2 +- drivers/ide/ht6560b.c | 2 +- drivers/ide/ide-4drives.c | 2 +- drivers/ide/ide-acpi.c | 6 +++--- drivers/ide/ide-pci-generic.c | 2 +- drivers/ide/qd65xx.c | 2 +- drivers/ide/umc8672.c | 2 +- drivers/infiniband/hw/ehca/ehca_classes.h | 4 ++-- drivers/infiniband/hw/ehca/ehca_main.c | 8 ++++---- drivers/infiniband/hw/nes/nes.c | 2 +- drivers/input/joystick/xpad.c | 6 +++--- drivers/input/misc/wistron_btns.c | 2 +- drivers/input/mouse/psmouse-base.c | 2 +- drivers/input/mouse/synaptics_i2c.c | 6 +++--- drivers/input/serio/hp_sdc.c | 2 +- drivers/input/touchscreen/eeti_ts.c | 4 ++-- drivers/input/touchscreen/htcpen.c | 4 ++-- drivers/input/touchscreen/ucb1400_ts.c | 2 +- drivers/input/touchscreen/usbtouchscreen.c | 4 ++-- drivers/isdn/hardware/avm/b1dma.c | 2 +- drivers/isdn/hardware/avm/c4.c | 2 +- drivers/isdn/sc/init.c | 2 +- drivers/leds/leds-clevo-mail.c | 2 +- drivers/leds/leds-ss4200.c | 2 +- drivers/macintosh/ams/ams-core.c | 2 +- drivers/macintosh/ams/ams-input.c | 4 ++-- drivers/macintosh/therm_adt746x.c | 2 +- drivers/media/dvb/dvb-usb/af9005.c | 2 +- drivers/media/dvb/dvb-usb/af9005.h | 2 +- drivers/media/radio/radio-gemtek.c | 10 +++++----- drivers/media/radio/radio-miropcm20.c | 2 +- drivers/media/rc/lirc_dev.c | 2 +- drivers/media/rc/mceusb.c | 4 ++-- drivers/media/rc/streamzap.c | 4 ++-- drivers/media/rc/winbond-cir.c | 4 ++-- drivers/media/video/c-qcam.c | 2 +- drivers/media/video/cs5345.c | 2 +- drivers/media/video/cs53l32a.c | 2 +- drivers/media/video/cx18/cx18-driver.c | 2 +- drivers/media/video/cx25821/cx25821-alsa.c | 2 +- drivers/media/video/cx88/cx88-alsa.c | 2 +- drivers/media/video/gspca/m5602/m5602_core.c | 4 ++-- drivers/media/video/gspca/m5602/m5602_mt9m111.h | 2 +- drivers/media/video/gspca/m5602/m5602_ov7660.h | 2 +- drivers/media/video/gspca/m5602/m5602_ov9650.h | 2 +- drivers/media/video/gspca/m5602/m5602_po1030.h | 2 +- drivers/media/video/gspca/m5602/m5602_s5k4aa.h | 2 +- drivers/media/video/gspca/m5602/m5602_s5k83a.h | 2 +- drivers/media/video/gspca/stv06xx/stv06xx.c | 4 ++-- drivers/media/video/hdpvr/hdpvr-core.c | 2 +- drivers/media/video/ivtv/ivtv-driver.c | 2 +- drivers/media/video/ivtv/ivtvfb.c | 2 +- drivers/media/video/marvell-ccic/mcam-core.c | 6 +++--- drivers/media/video/msp3400-driver.c | 6 +++--- drivers/media/video/msp3400-driver.h | 6 +++--- drivers/media/video/omap/omap_vout.c | 6 +++--- drivers/media/video/omap/omap_vout_vrfb.c | 2 +- drivers/media/video/ov7670.c | 2 +- drivers/media/video/saa7115.c | 2 +- drivers/media/video/stk-webcam.c | 4 ++-- drivers/media/video/tm6000/tm6000-alsa.c | 2 +- drivers/media/video/tvp514x.c | 2 +- drivers/media/video/tvp7002.c | 2 +- drivers/media/video/upd64083.c | 2 +- drivers/media/video/via-camera.c | 4 ++-- drivers/media/video/zoran/zoran_device.c | 2 +- drivers/media/video/zoran/zr36060.c | 2 +- drivers/memstick/host/jmb38x_ms.c | 2 +- drivers/memstick/host/r592.c | 2 +- drivers/memstick/host/tifm_ms.c | 2 +- drivers/misc/iwmc3200top/main.c | 12 ++++++------ drivers/mmc/core/core.c | 6 +++--- drivers/mmc/core/core.h | 2 +- drivers/mmc/host/tifm_sd.c | 4 ++-- drivers/mmc/host/vub300.c | 10 +++++----- drivers/mtd/nand/pxa3xx_nand.c | 2 +- drivers/mtd/nand/r852.c | 2 +- drivers/parport/parport_ip32.c | 2 +- drivers/pci/hotplug/acpi_pcihp.c | 2 +- drivers/pci/hotplug/acpiphp_core.c | 2 +- drivers/pci/hotplug/acpiphp_ibm.c | 2 +- drivers/pci/hotplug/cpcihp_zt5550.c | 4 ++-- drivers/pci/hotplug/cpqphp_core.c | 4 ++-- drivers/pci/hotplug/ibmphp_core.c | 2 +- drivers/pci/hotplug/pci_hotplug_core.c | 2 +- drivers/pci/hotplug/pciehp.h | 6 +++--- drivers/pci/hotplug/pciehp_core.c | 6 +++--- drivers/pci/hotplug/pcihp_skeleton.c | 2 +- drivers/pci/hotplug/rpaphp.h | 2 +- drivers/pci/hotplug/rpaphp_core.c | 2 +- drivers/pci/hotplug/shpchp.h | 4 ++-- drivers/pci/hotplug/shpchp_core.c | 4 ++-- drivers/pci/pcie/aer/aer_inject.c | 2 +- drivers/pci/pcie/aer/aerdrv_core.c | 4 ++-- drivers/pcmcia/yenta_socket.c | 6 +++--- drivers/platform/x86/compal-laptop.c | 2 +- drivers/platform/x86/intel_oaktrail.c | 2 +- drivers/platform/x86/msi-laptop.c | 2 +- drivers/platform/x86/samsung-laptop.c | 4 ++-- drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++-------- drivers/platform/x86/wmi.c | 4 ++-- drivers/power/ds2760_battery.c | 2 +- drivers/s390/char/raw3270.c | 2 +- drivers/s390/char/vmwatchdog.c | 4 ++-- drivers/scsi/aha1542.c | 2 +- drivers/scsi/dc395x.c | 2 +- drivers/scsi/nsp32.c | 4 ++-- drivers/scsi/pcmcia/nsp_cs.c | 2 +- drivers/staging/comedi/comedi_fops.c | 2 +- drivers/staging/comedi/comedi_fops.h | 3 ++- drivers/staging/media/go7007/snd-go7007.c | 2 +- drivers/staging/media/lirc/lirc_bt829.c | 2 +- drivers/staging/media/lirc/lirc_igorplugusb.c | 4 ++-- drivers/staging/media/lirc/lirc_parallel.c | 4 ++-- drivers/staging/media/lirc/lirc_serial.c | 10 +++++----- drivers/staging/media/lirc/lirc_sir.c | 2 +- drivers/staging/media/lirc/lirc_zilog.c | 4 ++-- drivers/staging/quatech_usb2/quatech_usb2.c | 2 +- drivers/staging/serqt_usb2/serqt_usb2.c | 2 +- drivers/staging/speakup/speakup.h | 2 +- drivers/staging/speakup/synth.c | 2 +- drivers/staging/vme/bridges/vme_tsi148.c | 2 +- drivers/tty/rocket.c | 2 +- drivers/tty/synclink.c | 2 +- drivers/tty/synclinkmp.c | 2 +- drivers/usb/atm/speedtch.c | 6 +++--- drivers/usb/atm/ueagle-atm.c | 2 +- drivers/usb/core/devio.c | 2 +- drivers/usb/core/hub.c | 8 ++++---- drivers/usb/core/usb.c | 2 +- drivers/usb/gadget/amd5536udc.c | 8 ++++---- drivers/usb/gadget/ether.c | 4 ++-- drivers/usb/gadget/file_storage.c | 10 +++++----- drivers/usb/gadget/net2272.c | 2 +- drivers/usb/gadget/net2280.c | 6 +++--- drivers/usb/gadget/omap_udc.c | 2 +- drivers/usb/gadget/pch_udc.c | 2 +- drivers/usb/gadget/serial.c | 4 ++-- drivers/usb/gadget/zero.c | 2 +- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/ohci-hcd.c | 4 ++-- drivers/usb/host/oxu210hp-hcd.c | 2 +- drivers/usb/host/u132-hcd.c | 2 +- drivers/usb/host/uhci-hcd.c | 2 +- drivers/usb/misc/ftdi-elan.c | 2 +- drivers/usb/misc/iowarrior.c | 2 +- drivers/usb/musb/cppi_dma.c | 2 +- drivers/usb/musb/musb_core.c | 2 +- drivers/usb/serial/aircable.c | 2 +- drivers/usb/serial/ark3116.c | 2 +- drivers/usb/serial/belkin_sa.c | 2 +- drivers/usb/serial/ch341.c | 2 +- drivers/usb/serial/cp210x.c | 2 +- drivers/usb/serial/cyberjack.c | 2 +- drivers/usb/serial/cypress_m8.c | 6 +++--- drivers/usb/serial/digi_acceleport.c | 2 +- drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 2 +- drivers/usb/serial/funsoft.c | 2 +- drivers/usb/serial/garmin_gps.c | 2 +- drivers/usb/serial/io_edgeport.c | 2 +- drivers/usb/serial/io_ti.c | 4 ++-- drivers/usb/serial/ipaq.c | 2 +- drivers/usb/serial/ipw.c | 2 +- drivers/usb/serial/ir-usb.c | 2 +- drivers/usb/serial/iuu_phoenix.c | 6 +++--- drivers/usb/serial/keyspan.c | 2 +- drivers/usb/serial/keyspan_pda.c | 2 +- drivers/usb/serial/kl5kusb105.c | 2 +- drivers/usb/serial/mct_u232.c | 2 +- drivers/usb/serial/mos7720.c | 2 +- drivers/usb/serial/mos7840.c | 2 +- drivers/usb/serial/navman.c | 2 +- drivers/usb/serial/omninet.c | 2 +- drivers/usb/serial/opticon.c | 2 +- drivers/usb/serial/option.c | 2 +- drivers/usb/serial/oti6858.c | 2 +- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/qcserial.c | 2 +- drivers/usb/serial/safe_serial.c | 6 +++--- drivers/usb/serial/sierra.c | 4 ++-- drivers/usb/serial/spcp8x5.c | 2 +- drivers/usb/serial/ssu100.c | 2 +- drivers/usb/serial/symbolserial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 2 +- drivers/usb/serial/usb-serial.c | 2 +- drivers/usb/serial/usb_wwan.c | 2 +- drivers/usb/serial/visor.c | 2 +- drivers/usb/serial/whiteheat.c | 2 +- drivers/video/aty/atyfb_base.c | 4 ++-- drivers/video/aty/radeon_base.c | 18 +++++++++--------- drivers/video/cirrusfb.c | 2 +- drivers/video/hgafb.c | 2 +- drivers/video/intelfb/intelfbdrv.c | 16 ++++++++-------- drivers/video/logo/logo.c | 2 +- drivers/video/neofb.c | 10 +++++----- drivers/video/omap/omapfb_main.c | 4 ++-- drivers/video/omap2/dss/core.c | 2 +- drivers/video/omap2/dss/dsi.c | 4 ++-- drivers/video/omap2/dss/dss.h | 2 +- drivers/video/omap2/omapfb/omapfb-main.c | 8 ++++---- drivers/video/omap2/omapfb/omapfb.h | 2 +- drivers/video/pm2fb.c | 8 ++++---- drivers/video/pm3fb.c | 4 ++-- drivers/video/riva/fbdev.c | 6 +++--- drivers/video/smscufx.c | 4 ++-- drivers/video/sstfb.c | 6 +++--- drivers/video/tdfxfb.c | 2 +- drivers/video/udlfb.c | 6 +++--- drivers/video/uvesafb.c | 6 +++--- drivers/video/vfb.c | 2 +- drivers/watchdog/f71808e_wdt.c | 2 +- drivers/watchdog/mpc8xxx_wdt.c | 2 +- drivers/xen/xen-pciback/conf_space.c | 2 +- drivers/xen/xen-pciback/xenbus.c | 2 +- fs/lockd/mon.c | 2 +- fs/nfs/client.c | 2 +- fs/nfs/inode.c | 2 +- include/acpi/acpixf.h | 2 +- include/acpi/apei.h | 4 ++-- include/linux/console.h | 2 +- include/linux/lockd/lockd.h | 2 +- include/linux/mmc/host.h | 2 +- security/apparmor/include/apparmor.h | 10 +++++----- security/apparmor/lsm.c | 12 ++++++------ virt/kvm/iommu.c | 2 +- 283 files changed, 471 insertions(+), 465 deletions(-) (limited to 'drivers/misc') diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c index cb423f5aef24..c339a0880e6e 100644 --- a/drivers/accessibility/braille/braille_console.c +++ b/drivers/accessibility/braille/braille_console.c @@ -44,7 +44,7 @@ MODULE_LICENSE("GPL"); */ /* Emit various sounds */ -static int sound; +static bool sound; module_param(sound, bool, 0); MODULE_PARM_DESC(sound, "emit sounds"); diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 76dc02f15574..e6652d716e45 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -108,7 +108,7 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_use_default_register_widths, TRUE); /* * Optionally enable output from the AML Debug Object. */ -u32 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE); +bool ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE); /* * Optionally copy the entire DSDT to local memory (instead of simply diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index b8e08cb67a18..ebaf037a787b 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -118,7 +118,7 @@ struct ghes_estatus_cache { struct rcu_head rcu; }; -int ghes_disable; +bool ghes_disable; module_param_named(disable, ghes_disable, bool, 0); static int ghes_panic_timeout __read_mostly = 30; diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 05fee06f4d6e..ee7fddc4665c 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -41,7 +41,7 @@ #define HEST_PFX "HEST: " -int hest_disable; +bool hest_disable; EXPORT_SYMBOL_GPL(hest_disable); /* HEST table parsing */ diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 19a61136d848..88eb14304667 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -43,7 +43,7 @@ MODULE_AUTHOR("Kristen Carlson Accardi"); MODULE_DESCRIPTION(ACPI_DOCK_DRIVER_DESCRIPTION); MODULE_LICENSE("GPL"); -static int immediate_undock = 1; +static bool immediate_undock = 1; module_param(immediate_undock, bool, 0644); MODULE_PARM_DESC(immediate_undock, "1 (default) will cause the driver to " "undock immediately when the undock button is pressed, 0 will cause" diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c index 07f7fea8a4e2..e50e31a518af 100644 --- a/drivers/acpi/pci_slot.c +++ b/drivers/acpi/pci_slot.c @@ -34,7 +34,7 @@ #include #include -static int debug; +static bool debug; static int check_sta_before_sun; #define DRIVER_VERSION "0.1" diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 08a44b532f7c..eaef02afc7cf 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -69,21 +69,21 @@ MODULE_AUTHOR("Bruno Ducrot"); MODULE_DESCRIPTION("ACPI Video Driver"); MODULE_LICENSE("GPL"); -static int brightness_switch_enabled = 1; +static bool brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); /* * By default, we don't allow duplicate ACPI video bus devices * under the same VGA controller */ -static int allow_duplicates; +static bool allow_duplicates; module_param(allow_duplicates, bool, 0644); /* * Some BIOSes claim they use minimum backlight at boot, * and this may bring dimming screen after boot */ -static int use_bios_initial_backlight = 1; +static bool use_bios_initial_backlight = 1; module_param(use_bios_initial_backlight, bool, 0644); static int register_count = 0; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index e0bc9646a38e..55d6179dde58 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -599,9 +599,9 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, nv_pci_tbl); MODULE_VERSION(DRV_VERSION); -static int adma_enabled; -static int swncq_enabled = 1; -static int msi_enabled; +static bool adma_enabled; +static bool swncq_enabled = 1; +static bool msi_enabled; static void nv_adma_register_mode(struct ata_port *ap) { diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 1e9140626a83..e7e610aa9a7a 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -417,7 +417,7 @@ static struct ata_port_operations sil24_ops = { #endif }; -static int sata_sil24_msi; /* Disable MSI */ +static bool sata_sil24_msi; /* Disable MSI */ module_param_named(msi, sata_sil24_msi, bool, S_IRUGO); MODULE_PARM_DESC(msi, "Enable MSI (Default: false)"); diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 9a51df4f5b74..b182c2f7d777 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -112,12 +112,12 @@ static u8 read_prom_byte(struct he_dev *he_dev, int addr); /* globals */ static struct he_dev *he_devs; -static int disable64; +static bool disable64; static short nvpibits = -1; static short nvcibits = -1; static short rx_skb_reserve = 16; -static int irq_coalesce = 1; -static int sdh = 0; +static bool irq_coalesce = 1; +static bool sdh = 0; /* Read from EEPROM = 0000 0011b */ static unsigned int readtab[] = { diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 9cf20355ceec..8d680562ba73 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -59,8 +59,8 @@ /* module parameter, defined in drbd_main.c */ extern unsigned int minor_count; -extern int disable_sendpage; -extern int allow_oos; +extern bool disable_sendpage; +extern bool allow_oos; extern unsigned int cn_idx; #ifdef CONFIG_DRBD_FAULT_INJECTION diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 0358e55356c8..211fc44f84be 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -117,8 +117,8 @@ module_param(fault_devs, int, 0644); /* module parameter, defined */ unsigned int minor_count = DRBD_MINOR_COUNT_DEF; -int disable_sendpage; -int allow_oos; +bool disable_sendpage; +bool allow_oos; unsigned int cn_idx = CN_IDX_DRBD; int proc_details; /* Detail level in proc drbd*/ diff --git a/drivers/block/paride/bpck6.c b/drivers/block/paride/bpck6.c index ad124525ac23..ec64e7f5d1ce 100644 --- a/drivers/block/paride/bpck6.c +++ b/drivers/block/paride/bpck6.c @@ -20,9 +20,6 @@ */ -/* PARAMETERS */ -static int verbose; /* set this to 1 to see debugging messages and whatnot */ - #define BACKPACK_VERSION "2.0.2" #include @@ -36,6 +33,8 @@ static int verbose; /* set this to 1 to see debugging messages and whatnot */ #include "ppc6lnx.c" #include "paride.h" +/* PARAMETERS */ +static bool verbose; /* set this to 1 to see debugging messages and whatnot */ #define PPCSTRUCT(pi) ((Interface *)(pi->private)) diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 869e7676d46f..831e3ac156e6 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -124,8 +124,9 @@ by default. */ +#include -static int verbose = 0; +static bool verbose = 0; static int major = PD_MAJOR; static char *name = PD_NAME; static int cluster = 64; diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c index f21b520ef419..ec8f9ed6326e 100644 --- a/drivers/block/paride/pf.c +++ b/drivers/block/paride/pf.c @@ -118,13 +118,15 @@ #define PF_NAME "pf" #define PF_UNITS 4 +#include + /* Here are things one can override from the insmod command. Most are autoprobed by paride unless set here. Verbose is off by default. */ -static int verbose = 0; +static bool verbose = 0; static int major = PF_MAJOR; static char *name = PF_NAME; static int cluster = 64; diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index a79fb4f7ff62..4a27b1de5fcb 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -130,13 +130,14 @@ #define PI_PG 4 #endif +#include /* Here are things one can override from the insmod command. Most are autoprobed by paride unless set here. Verbose is 0 by default. */ -static int verbose = 0; +static bool verbose = 0; static int major = PG_MAJOR; static char *name = PG_NAME; static int disable = 0; diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c index 7179f79d7468..2596042eb987 100644 --- a/drivers/block/paride/pt.c +++ b/drivers/block/paride/pt.c @@ -109,13 +109,15 @@ #define PT_NAME "pt" #define PT_UNITS 4 +#include + /* Here are things one can override from the insmod command. Most are autoprobed by paride unless set here. Verbose is on by default. */ -static int verbose = 0; +static bool verbose = 0; static int major = PT_MAJOR; static char *name = PT_NAME; static int disable = 0; diff --git a/drivers/block/xd.c b/drivers/block/xd.c index 4abd2bcd20fb..51a972704db5 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -148,7 +148,7 @@ static volatile int xdc_busy; static struct timer_list xd_watchdog_int; static volatile u_char xd_error; -static int nodma = XD_DONT_USE_DMA; +static bool nodma = XD_DONT_USE_DMA; static struct request_queue *xd_queue; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 55ac349695c4..f00f596c1029 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -37,13 +37,13 @@ #define VERSION "0.6" -static int ignore_dga; -static int ignore_csr; -static int ignore_sniffer; -static int disable_scofix; -static int force_scofix; +static bool ignore_dga; +static bool ignore_csr; +static bool ignore_sniffer; +static bool disable_scofix; +static bool force_scofix; -static int reset = 1; +static bool reset = 1; static struct usb_driver btusb_driver; diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 9c5b2dc38e29..a767d4de45a4 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -49,8 +49,8 @@ #define VERSION "0.3" -static int txcrc = 1; -static int hciextn = 1; +static bool txcrc = 1; +static bool hciextn = 1; #define BCSP_TXWINSIZE 4 diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 48ad2a7ab080..07114489994f 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -48,7 +48,7 @@ #define VERSION "2.2" -static int reset = 0; +static bool reset = 0; static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO]; diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 2118211aff99..1bbf7645a97c 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -285,17 +285,17 @@ #include /* used to tell the module to turn on full debugging messages */ -static int debug; +static bool debug; /* used to keep tray locked at all times */ static int keeplocked; /* default compatibility mode */ -static int autoclose=1; -static int autoeject; -static int lockdoor = 1; +static bool autoclose=1; +static bool autoeject; +static bool lockdoor = 1; /* will we ever get to use this... sigh. */ -static int check_media_type; +static bool check_media_type; /* automatically restart mrw format */ -static int mrw_format_restart = 1; +static bool mrw_format_restart = 1; module_param(debug, bool, 0); module_param(autoclose, bool, 0); module_param(autoeject, bool, 0); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 780498d76581..444f8b6ab411 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -33,7 +33,7 @@ #define ULI_X86_64_ENU_SCR_REG 0x54 static struct resource *aperture_resource; -static int __initdata agp_try_unsupported = 1; +static bool __initdata agp_try_unsupported = 1; static int agp_bridges_found; static void amd64_tlbflush(struct agp_memory *temp) diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c index 29aacd81de78..08704ae53956 100644 --- a/drivers/char/agp/sis-agp.c +++ b/drivers/char/agp/sis-agp.c @@ -17,7 +17,7 @@ #define PCI_DEVICE_ID_SI_662 0x0662 #define PCI_DEVICE_ID_SI_671 0x0671 -static int __devinitdata agp_sis_force_delay = 0; +static bool __devinitdata agp_sis_force_delay = 0; static int __devinitdata agp_sis_agp_spec = -1; static int sis_fetch_size(void) diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index 6e40072fbf67..40cc0cf2ded6 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -69,19 +69,19 @@ MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)"); MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops"); MODULE_LICENSE("GPL"); -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force loading without checking for supported models"); -static int ignore_dmi; +static bool ignore_dmi; module_param(ignore_dmi, bool, 0); MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); -static int restricted; +static bool restricted; module_param(restricted, bool, 0); MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set"); -static int power_status; +static bool power_status; module_param(power_status, bool, 0600); MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k"); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 9397ab49b72e..50fcf9c04569 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1227,7 +1227,7 @@ static int smi_num; /* Used to sequence the SMIs */ #define DEFAULT_REGSPACING 1 #define DEFAULT_REGSIZE 1 -static int si_trydefaults = 1; +static bool si_trydefaults = 1; static char *si_type[SI_MAX_PARMS]; #define MAX_SI_TYPE_STR 30 static char si_type_str[MAX_SI_TYPE_STR]; diff --git a/drivers/char/lp.c b/drivers/char/lp.c index 97c3edb95ae7..f43485607063 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -829,7 +829,7 @@ static struct console lpcons = { static int parport_nr[LP_NO] = { [0 ... LP_NO-1] = LP_PARPORT_UNSPEC }; static char *parport[LP_NO]; -static int reset; +static bool reset; module_param_array(parport, charp, NULL, 0); module_param(reset, bool, 0); diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index a12f52400dbc..bf586ae1ee83 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -51,7 +51,7 @@ static int write_block(unsigned long p, const char __user *buf, int count); #define KFLASH_ID 0x89A6 //Intel flash #define KFLASH_ID4 0xB0D4 //Intel flash 4Meg -static int flashdebug; //if set - we will display progress msgs +static bool flashdebug; //if set - we will display progress msgs static int gbWriteEnable; static int gbWriteBase64Enable; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 15781396af25..07f6a5abe372 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -439,7 +439,7 @@ static int mgslpc_device_count = 0; * .text section address and breakpoint on module load. * This is useful for use with gdb and add-symbol-file command. */ -static int break_on_load=0; +static bool break_on_load=0; /* * Driver major number, defaults to zero to get auto diff --git a/drivers/char/random.c b/drivers/char/random.c index 85da8740586b..732215b805c1 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -387,7 +387,7 @@ static DECLARE_WAIT_QUEUE_HEAD(random_write_wait); static struct fasync_struct *fasync; #if 0 -static int debug; +static bool debug; module_param(debug, bool, 0644); #define DEBUG_ENT(fmt, arg...) do { \ if (debug) \ diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 10cc44ceb5d1..a1748621111b 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -255,7 +255,7 @@ out: return size; } -static int itpm; +static bool itpm; module_param(itpm, bool, 0444); MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)"); @@ -500,7 +500,7 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id) return IRQ_HANDLED; } -static int interrupts = 1; +static bool interrupts = 1; module_param(interrupts, bool, 0444); MODULE_PARM_DESC(interrupts, "Enable interrupts"); @@ -828,7 +828,7 @@ static struct platform_driver tis_drv = { static struct platform_device *pdev; -static int force; +static bool force; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry"); static int __init init_tis(void) diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c index b153674431f1..e294e1b3616c 100644 --- a/drivers/edac/r82600_edac.c +++ b/drivers/edac/r82600_edac.c @@ -131,7 +131,7 @@ struct r82600_error_info { u32 eapr; }; -static unsigned int disable_hardware_scrub; +static bool disable_hardware_scrub; static struct edac_pci_ctl_info *r82600_pci; diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 68375bc3aef6..80e95aa3bf14 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -66,7 +66,7 @@ * * Concurrent logins are useful together with cluster filesystems. */ -static int sbp2_param_exclusive_login = 1; +static bool sbp2_param_exclusive_login = 1; module_param_named(exclusive_login, sbp2_param_exclusive_login, bool, 0644); MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device " "(default = Y, use N for concurrent initiators)"); diff --git a/drivers/hid/hid-prodikeys.c b/drivers/hid/hid-prodikeys.c index f779009104eb..b71b77ab0dc7 100644 --- a/drivers/hid/hid-prodikeys.c +++ b/drivers/hid/hid-prodikeys.c @@ -90,7 +90,7 @@ static const char longname[] = "Prodikeys PC-MIDI Keyboard"; static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; -static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; +static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; module_param_array(index, int, NULL, 0444); module_param_array(id, charp, NULL, 0444); diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index 65a35cf5b3c5..3b728e8f169b 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -145,7 +145,7 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 }; /* Insmod parameters */ -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Set to one to force detection."); static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1, diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index d30855a75786..34a14a77e008 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -603,11 +603,11 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { /* Insmod parameters */ -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Set to one to force detection."); /* Default verbose is 1, since this driver is still in the testing phase */ -static int verbose = 1; +static bool verbose = 1; module_param(verbose, bool, 0644); MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting"); diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 522860ab6ce8..554f046bcf20 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -58,7 +58,7 @@ ACPI_MODULE_NAME(ACPI_POWER_METER_NAME); #define POWER_ALARM_NAME "power1_alarm" static int cap_in_hardware; -static int force_cap_on; +static bool force_cap_on; static int can_cap_in_hardware(void) { diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 1ad0a885c5a5..0158cc35cb2e 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -103,7 +103,7 @@ static int adm1021_remove(struct i2c_client *client); static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ -static int read_only; +static bool read_only; static const struct i2c_device_id adm1021_id[] = { diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index cfcc3b6fb6bf..ed60242d6a0a 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -48,8 +48,8 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; /* Module parameters */ -static int se_input = 1; /* Default is SE, 0 == diff */ -static int int_vref = 1; /* Default is internal ref ON */ +static bool se_input = 1; /* Default is SE, 0 == diff */ +static bool int_vref = 1; /* Default is internal ref ON */ static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */ module_param(se_input, bool, S_IRUGO); module_param(int_vref, bool, S_IRUGO); diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index d9803958e49f..ffb229af7861 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -45,7 +45,7 @@ static struct platform_device *pdev; /* Module load parameters */ -static int force_start; +static bool force_start; module_param(force_start, bool, 0); MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs"); @@ -53,7 +53,7 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -static int probe_all_addr; +static bool probe_all_addr; module_param(probe_all_addr, bool, 0); MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC " "addresses"); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 38c0b87676de..603ef2af2707 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -146,10 +146,10 @@ static inline void superio_exit(void) #define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */ /* Update battery voltage after every reading if true */ -static int update_vbat; +static bool update_vbat; /* Not all BIOSes properly configure the PWM registers */ -static int fix_pwm_polarity; +static bool fix_pwm_polarity; /* Many IT87 constants specified below */ diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index 3b43df418613..8bd6c5c9e05b 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -151,12 +151,12 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ -static int disable_block; +static bool disable_block; module_param(disable_block, bool, 0); MODULE_PARM_DESC(disable_block, "Set to non-zero to disable SMBus block data transactions."); -static int init; +static bool init; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to non-zero to force chip initialization."); diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c index 6914195cfd35..88953f99e914 100644 --- a/drivers/hwmon/max1668.c +++ b/drivers/hwmon/max1668.c @@ -59,7 +59,7 @@ static unsigned short max1668_addr_list[] = { #define DEV_ID_MAX1989 0xb /* read only mode module parameter */ -static int read_only; +static bool read_only; module_param(read_only, bool, 0); MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index bde50e34d013..374118f2b9f9 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -71,7 +71,7 @@ module_param(force_i2c, byte, 0); MODULE_PARM_DESC(force_i2c, "Initialize the i2c address of the sensors"); -static int init = 1; +static bool init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 65b685e2c7b7..17a8fa2d9ae9 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -67,11 +67,11 @@ module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); -static int init = 1; +static bool init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 6e5d0ae594b0..35aa5149307a 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -58,11 +58,11 @@ module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset"); -static int init; +static bool init; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to one to force extra software initialization"); diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 9ded133e43f0..d3100eab6b2f 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -56,7 +56,7 @@ module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); -static int init; +static bool init; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to one to force chip initialization"); diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 3cc6fef22087..45ec7e7c3c27 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -61,7 +61,7 @@ module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index 3ee398d0e4c9..aa58b25565bc 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -42,7 +42,7 @@ static const unsigned short normal_i2c[] = { }; -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index 0254e181893d..063bd9508d8a 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -39,7 +39,7 @@ static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END }; /* Insmod parameters */ -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c index 63bb1cc2a042..fa88868cb556 100644 --- a/drivers/i2c/busses/i2c-highlander.c +++ b/drivers/i2c/busses/i2c-highlander.c @@ -52,7 +52,7 @@ struct highlander_i2c_dev { size_t buf_len; }; -static int iic_force_poll, iic_force_normal; +static bool iic_force_poll, iic_force_normal; static int iic_timeout = 1000, iic_read_delay; static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 3c110fbc409b..c08ceb957aa7 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -51,11 +51,11 @@ MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION); MODULE_LICENSE("GPL"); -static int iic_force_poll; +static bool iic_force_poll; module_param(iic_force_poll, bool, 0); MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); -static int iic_force_fast; +static bool iic_force_fast; module_param(iic_force_fast, bool, 0); MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)"); diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index e6f539e26f65..58893772c3d8 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -93,8 +93,8 @@ static struct pci_driver sis630_driver; /* insmod parameters */ -static int high_clock; -static int force; +static bool high_clock; +static bool force; module_param(high_clock, bool, 0); MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz)."); module_param(force, bool, 0); diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 0b012f1f8ac5..2a62c998044a 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -91,7 +91,7 @@ static unsigned short SMBHSTCFG = 0xD2; /* If force is set to anything different from 0, we forcibly enable the VT596. DANGEROUS! */ -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!"); diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c index 25b9fe3a9f8e..d3be99fb4154 100644 --- a/drivers/ide/ali14xx.c +++ b/drivers/ide/ali14xx.c @@ -221,7 +221,7 @@ static int __init ali14xx_probe(void) return ide_legacy_device_add(&ali14xx_port_info, 0); } -static int probe_ali14xx; +static bool probe_ali14xx; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c index a81bd7575792..14717304b388 100644 --- a/drivers/ide/cmd640.c +++ b/drivers/ide/cmd640.c @@ -111,7 +111,7 @@ #define DRV_NAME "cmd640" -static int cmd640_vlb; +static bool cmd640_vlb; /* * CMD640 specific registers definition. diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c index 6929f7fce93a..46af4743b3e6 100644 --- a/drivers/ide/dtc2278.c +++ b/drivers/ide/dtc2278.c @@ -130,7 +130,7 @@ static int __init dtc2278_probe(void) return ide_legacy_device_add(&dtc2278_port_info, 0); } -static int probe_dtc2278; +static bool probe_dtc2278; module_param_named(probe, probe_dtc2278, bool, 0); MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets"); diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c index 3feaa26410be..51beb85250d4 100644 --- a/drivers/ide/gayle.c +++ b/drivers/ide/gayle.c @@ -50,7 +50,7 @@ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) -static int ide_doubler; +static bool ide_doubler; module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c index 808bcdcbf8e1..986f2513eab4 100644 --- a/drivers/ide/ht6560b.c +++ b/drivers/ide/ht6560b.c @@ -317,7 +317,7 @@ static void __init ht6560b_init_dev(ide_drive_t *drive) ide_set_drivedata(drive, (void *)t); } -static int probe_ht6560b; +static bool probe_ht6560b; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); diff --git a/drivers/ide/ide-4drives.c b/drivers/ide/ide-4drives.c index 979d342c338a..547d7cf2e016 100644 --- a/drivers/ide/ide-4drives.c +++ b/drivers/ide/ide-4drives.c @@ -6,7 +6,7 @@ #define DRV_NAME "ide-4drives" -static int probe_4drives; +static bool probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index f22edc66b030..f1a6796b165c 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -53,15 +53,15 @@ struct ide_acpi_hwif_link { #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ -static int ide_noacpi; +static bool ide_noacpi; module_param_named(noacpi, ide_noacpi, bool, 0); MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); -static int ide_acpigtf; +static bool ide_acpigtf; module_param_named(acpigtf, ide_acpigtf, bool, 0); MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); -static int ide_acpionboot; +static bool ide_acpionboot; module_param_named(acpionboot, ide_acpionboot, bool, 0); MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index a743e68a8903..7f56b738d762 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -28,7 +28,7 @@ #define DRV_NAME "ide_pci_generic" -static int ide_generic_all; /* Set to claim all devices */ +static bool ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 3f0244fd8e62..8bbfe5557c7b 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -417,7 +417,7 @@ static int __init qd_probe(int base) return rc; } -static int probe_qd65xx; +static bool probe_qd65xx; module_param_named(probe, probe_qd65xx, bool, 0); MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c index 47adcd09cb26..5cfb78120669 100644 --- a/drivers/ide/umc8672.c +++ b/drivers/ide/umc8672.c @@ -160,7 +160,7 @@ static int __init umc8672_probe(void) return ide_legacy_device_add(&umc8672_port_info, 0); } -static int probe_umc8672; +static bool probe_umc8672; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index aaf6023a4835..f08f6eaf3fa8 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -379,8 +379,8 @@ extern spinlock_t shca_list_lock; extern int ehca_static_rate; extern int ehca_port_act_time; -extern int ehca_use_hp_mr; -extern int ehca_scaling_code; +extern bool ehca_use_hp_mr; +extern bool ehca_scaling_code; extern int ehca_lock_hcalls; extern int ehca_nr_ports; extern int ehca_max_cq; diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 8af8d4f7bdb1..832e7a7d0aee 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -59,16 +59,16 @@ MODULE_AUTHOR("Christoph Raisch "); MODULE_DESCRIPTION("IBM eServer HCA InfiniBand Device Driver"); MODULE_VERSION(HCAD_VERSION); -static int ehca_open_aqp1 = 0; +static bool ehca_open_aqp1 = 0; static int ehca_hw_level = 0; -static int ehca_poll_all_eqs = 1; +static bool ehca_poll_all_eqs = 1; int ehca_debug_level = 0; int ehca_nr_ports = -1; -int ehca_use_hp_mr = 0; +bool ehca_use_hp_mr = 0; int ehca_port_act_time = 30; int ehca_static_rate = -1; -int ehca_scaling_code = 0; +bool ehca_scaling_code = 0; int ehca_lock_hcalls = -1; int ehca_max_cq = -1; int ehca_max_qp = -1; diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 5965b3df8f2f..7013da5e9eda 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -96,7 +96,7 @@ unsigned int wqm_quanta = 0x10000; module_param(wqm_quanta, int, 0644); MODULE_PARM_DESC(wqm_quanta, "WQM quanta"); -static unsigned int limit_maxrdreqsz; +static bool limit_maxrdreqsz; module_param(limit_maxrdreqsz, bool, 0644); MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes"); diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 32bbd4c77b7c..fd7a0d5bc94d 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -98,15 +98,15 @@ #define XTYPE_XBOX360W 2 #define XTYPE_UNKNOWN 3 -static int dpad_to_buttons; +static bool dpad_to_buttons; module_param(dpad_to_buttons, bool, S_IRUGO); MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); -static int triggers_to_buttons; +static bool triggers_to_buttons; module_param(triggers_to_buttons, bool, S_IRUGO); MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads"); -static int sticks_to_null; +static bool sticks_to_null; module_param(sticks_to_null, bool, S_IRUGO); MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads"); diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 52b419348983..e2bdfd4bea70 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -48,7 +48,7 @@ MODULE_DESCRIPTION("Wistron laptop button driver"); MODULE_LICENSE("GPL v2"); MODULE_VERSION("0.3"); -static int force; /* = 0; */ +static bool force; /* = 0; */ module_param(force, bool, 0); MODULE_PARM_DESC(force, "Load even if computer is not in database"); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index de7e8bc17b1f..e6c9931f02c7 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -60,7 +60,7 @@ static unsigned int psmouse_rate = 100; module_param_named(rate, psmouse_rate, uint, 0644); MODULE_PARM_DESC(rate, "Report rate, in reports per second."); -static unsigned int psmouse_smartscroll = 1; +static bool psmouse_smartscroll = 1; module_param_named(smartscroll, psmouse_smartscroll, bool, 0644); MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index 4b755cb5b38c..1c58aafa523f 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -185,17 +185,17 @@ #define NO_DATA_SLEEP_MSECS (MSEC_PER_SEC / 4) /* Control touchpad's No Deceleration option */ -static int no_decel = 1; +static bool no_decel = 1; module_param(no_decel, bool, 0644); MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)"); /* Control touchpad's Reduced Reporting option */ -static int reduce_report; +static bool reduce_report; module_param(reduce_report, bool, 0644); MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)"); /* Control touchpad's No Filter option */ -static int no_filter; +static bool no_filter; module_param(no_filter, bool, 0644); MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)"); diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 979c443bf1ef..be3316073ae7 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -105,7 +105,7 @@ EXPORT_SYMBOL(__hp_sdc_enqueue_transaction); EXPORT_SYMBOL(hp_sdc_enqueue_transaction); EXPORT_SYMBOL(hp_sdc_dequeue_transaction); -static unsigned int hp_sdc_disabled; +static bool hp_sdc_disabled; module_param_named(no_hpsdc, hp_sdc_disabled, bool, 0); MODULE_PARM_DESC(no_hpsdc, "Do not enable HP SDC driver."); diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 7f8f538a9806..1df19bb8534a 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -35,11 +35,11 @@ #include #include -static int flip_x; +static bool flip_x; module_param(flip_x, bool, 0644); MODULE_PARM_DESC(flip_x, "flip x coordinate"); -static int flip_y; +static bool flip_y; module_param(flip_y, bool, 0644); MODULE_PARM_DESC(flip_y, "flip y coordinate"); diff --git a/drivers/input/touchscreen/htcpen.c b/drivers/input/touchscreen/htcpen.c index 81e338623944..d13143b68b3e 100644 --- a/drivers/input/touchscreen/htcpen.c +++ b/drivers/input/touchscreen/htcpen.c @@ -40,10 +40,10 @@ MODULE_LICENSE("GPL"); #define X_AXIS_MAX 2040 #define Y_AXIS_MAX 2040 -static int invert_x; +static bool invert_x; module_param(invert_x, bool, 0644); MODULE_PARM_DESC(invert_x, "If set, X axis is inverted"); -static int invert_y; +static bool invert_y; module_param(invert_y, bool, 0644); MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted"); diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index d2b57536feea..46e83ad53f43 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -30,7 +30,7 @@ #define UCB1400_TS_POLL_PERIOD 10 /* ms */ -static int adcsync; +static bool adcsync; static int ts_delay = 55; /* us */ static int ts_delay_pressure; /* us */ diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 06cef3ccc63a..3a5ebf452e81 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -60,11 +60,11 @@ #define DRIVER_AUTHOR "Daniel Ritz " #define DRIVER_DESC "USB Touchscreen Driver" -static int swap_xy; +static bool swap_xy; module_param(swap_xy, bool, 0644); MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); -static int hwcalib_xy; +static bool hwcalib_xy; module_param(hwcalib_xy, bool, 0644); MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available"); diff --git a/drivers/isdn/hardware/avm/b1dma.c b/drivers/isdn/hardware/avm/b1dma.c index 9c8d7aa053c5..a0ed668d4d2a 100644 --- a/drivers/isdn/hardware/avm/b1dma.c +++ b/drivers/isdn/hardware/avm/b1dma.c @@ -40,7 +40,7 @@ MODULE_DESCRIPTION("CAPI4Linux: DMA support for active AVM cards"); MODULE_AUTHOR("Carsten Paeth"); MODULE_LICENSE("GPL"); -static int suppress_pollack = 0; +static bool suppress_pollack = 0; module_param(suppress_pollack, bool, 0); /* ------------------------------------------------------------- */ diff --git a/drivers/isdn/hardware/avm/c4.c b/drivers/isdn/hardware/avm/c4.c index d3530f6e8115..9743b24ef9d6 100644 --- a/drivers/isdn/hardware/avm/c4.c +++ b/drivers/isdn/hardware/avm/c4.c @@ -40,7 +40,7 @@ static char *revision = "$Revision: 1.1.2.2 $"; /* ------------------------------------------------------------- */ -static int suppress_pollack; +static bool suppress_pollack; static struct pci_device_id c4_pci_tbl[] = { { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C4, 0, 0, (unsigned long)4 }, diff --git a/drivers/isdn/sc/init.c b/drivers/isdn/sc/init.c index ca710ab278ec..023de789f250 100644 --- a/drivers/isdn/sc/init.c +++ b/drivers/isdn/sc/init.c @@ -30,7 +30,7 @@ static const char *boardname[] = { "DataCommute/BRI", "DataCommute/PRI", "TeleCo static unsigned int io[] = {0,0,0,0}; static unsigned char irq[] = {0,0,0,0}; static unsigned long ram[] = {0,0,0,0}; -static int do_reset = 0; +static bool do_reset = 0; module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c index a498135a4e80..1ed1677c916f 100644 --- a/drivers/leds/leds-clevo-mail.c +++ b/drivers/leds/leds-clevo-mail.c @@ -18,7 +18,7 @@ MODULE_AUTHOR("Márton Németh "); MODULE_DESCRIPTION("Clevo mail LED driver"); MODULE_LICENSE("GPL"); -static unsigned int __initdata nodetect; +static bool __initdata nodetect; module_param_named(nodetect, nodetect, bool, 0); MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection"); diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index 614ebebaaa28..57371e1485ab 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -79,7 +79,7 @@ static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id) return 1; } -static unsigned int __initdata nodetect; +static bool __initdata nodetect; module_param_named(nodetect, nodetect, bool, 0); MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection"); diff --git a/drivers/macintosh/ams/ams-core.c b/drivers/macintosh/ams/ams-core.c index 399beb1638d1..5c6a2d876562 100644 --- a/drivers/macintosh/ams/ams-core.c +++ b/drivers/macintosh/ams/ams-core.c @@ -31,7 +31,7 @@ /* There is only one motion sensor per machine */ struct ams ams_info; -static unsigned int verbose; +static bool verbose; module_param(verbose, bool, 0644); MODULE_PARM_DESC(verbose, "Show free falls and shocks in kernel output"); diff --git a/drivers/macintosh/ams/ams-input.c b/drivers/macintosh/ams/ams-input.c index 8a712392cd38..b27e530a87a4 100644 --- a/drivers/macintosh/ams/ams-input.c +++ b/drivers/macintosh/ams/ams-input.c @@ -19,11 +19,11 @@ #include "ams.h" -static unsigned int joystick; +static bool joystick; module_param(joystick, bool, S_IRUGO); MODULE_PARM_DESC(joystick, "Enable the input class device on module load"); -static unsigned int invert; +static bool invert; module_param(invert, bool, S_IWUSR | S_IRUGO); MODULE_PARM_DESC(invert, "Invert input data on X and Y axis"); diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 02367308ff2e..c60d025044ee 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -52,7 +52,7 @@ static const char *sensor_location[3]; static int limit_adjust; static int fan_speed = -1; -static int verbose; +static bool verbose; MODULE_AUTHOR("Colin Leroy "); MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and " diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c index bd51a764351b..4fc024d77040 100644 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -30,7 +30,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." DVB_USB_DEBUG_STATUS); /* enable obnoxious led */ -int dvb_usb_af9005_led = 1; +bool dvb_usb_af9005_led = 1; module_param_named(led, dvb_usb_af9005_led, bool, 0644); MODULE_PARM_DESC(led, "enable led (default: 1)."); diff --git a/drivers/media/dvb/dvb-usb/af9005.h b/drivers/media/dvb/dvb-usb/af9005.h index c71c77bd7f4b..6a2bf3de8456 100644 --- a/drivers/media/dvb/dvb-usb/af9005.h +++ b/drivers/media/dvb/dvb-usb/af9005.h @@ -35,7 +35,7 @@ extern int dvb_usb_af9005_debug; #define deb_i2c(args...) dprintk(dvb_usb_af9005_debug,0x10,args) #define deb_fw(args...) dprintk(dvb_usb_af9005_debug,0x20,args) -extern int dvb_usb_af9005_led; +extern bool dvb_usb_af9005_led; /* firmware */ #define FW_BULKOUT_SIZE 250 diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index edadc8449a3d..36ce0611c037 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -47,11 +47,11 @@ MODULE_VERSION("0.0.4"); #endif static int io = CONFIG_RADIO_GEMTEK_PORT; -static int probe = CONFIG_RADIO_GEMTEK_PROBE; -static int hardmute; -static int shutdown = 1; -static int keepmuted = 1; -static int initmute = 1; +static bool probe = CONFIG_RADIO_GEMTEK_PROBE; +static bool hardmute; +static bool shutdown = 1; +static bool keepmuted = 1; +static bool initmute = 1; static int radio_nr = -1; module_param(io, int, 0444); diff --git a/drivers/media/radio/radio-miropcm20.c b/drivers/media/radio/radio-miropcm20.c index 3fb76e3834c9..87c1ee13b058 100644 --- a/drivers/media/radio/radio-miropcm20.c +++ b/drivers/media/radio/radio-miropcm20.c @@ -23,7 +23,7 @@ static int radio_nr = -1; module_param(radio_nr, int, 0); MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)"); -static int mono; +static bool mono; module_param(mono, bool, 0); MODULE_PARM_DESC(mono, "Force tuner into mono mode."); diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index 27997a9ceb0d..ca12d3289bfe 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -38,7 +38,7 @@ #include #include -static int debug; +static bool debug; #define IRCTL_DEV_NAME "BaseRemoteCtl" #define NOPLUG -1 diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 20bb12d6fbbe..21105bf9594d 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -156,9 +156,9 @@ /* module parameters */ #ifdef CONFIG_USB_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif #define mce_dbg(dev, fmt, ...) \ diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c index b1d29d09eeae..d6f4bfe09391 100644 --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -43,9 +43,9 @@ #define DRIVER_DESC "Streamzap Remote Control driver" #ifdef CONFIG_USB_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif #define USB_STREAMZAP_VENDOR_ID 0x0e9c diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index e7f7a57bf684..b09c5fae489b 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -226,11 +226,11 @@ module_param(protocol, uint, 0444); MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command " "(0 = RC5, 1 = NEC, 2 = RC6A, default)"); -static int invert; /* default = 0 */ +static bool invert; /* default = 0 */ module_param(invert, bool, 0444); MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver"); -static int txandrx; /* default = 0 */ +static bool txandrx; /* default = 0 */ module_param(txandrx, bool, 0444); MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX"); diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index cd8ff0473184..fda32f52554a 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -72,7 +72,7 @@ struct qcam { static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 }; static int probe = 2; -static int force_rgb; +static bool force_rgb; static int video_nr = -1; /* FIXME: parport=auto would never have worked, surely? --RR */ diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 5909f2557ab4..1d64af9adf71 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -31,7 +31,7 @@ MODULE_DESCRIPTION("i2c device driver for cs5345 Audio ADC"); MODULE_AUTHOR("Hans Verkuil"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index d93e5ab45fd3..51c5b9ad67d8 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -35,7 +35,7 @@ MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC"); MODULE_AUTHOR("Martin Vaughan"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index c6ff32a6137c..349bd9c2aff5 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -75,7 +75,7 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; static unsigned cardtype_c = 1; static unsigned tuner_c = 1; -static unsigned radio_c = 1; +static bool radio_c = 1; static char pal[] = "--"; static char secam[] = "--"; static char ntsc[] = "-"; diff --git a/drivers/media/video/cx25821/cx25821-alsa.c b/drivers/media/video/cx25821/cx25821-alsa.c index 09e99de5fd21..58be4f3bb3cb 100644 --- a/drivers/media/video/cx25821/cx25821-alsa.c +++ b/drivers/media/video/cx25821/cx25821-alsa.c @@ -102,7 +102,7 @@ struct cx25821_audio_dev { static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ -static int enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 }; +static bool enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 }; module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable cx25821 soundcard. default enabled."); diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 68d1240f493c..04bf6627d362 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -96,7 +96,7 @@ typedef struct cx88_audio_dev snd_cx88_card_t; static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static const char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ -static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; +static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable cx88x soundcard. default enabled."); diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 9fe3816b2aa0..0c4493675438 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -27,8 +27,8 @@ /* Kernel module parameters */ int force_sensor; -static int dump_bridge; -int dump_sensor; +static bool dump_bridge; +bool dump_sensor; static const struct usb_device_id m5602_table[] = { {USB_DEVICE(0x0402, 0x5602)}, diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/video/gspca/m5602/m5602_mt9m111.h index b1f0c492036a..8c672b5c8c6a 100644 --- a/drivers/media/video/gspca/m5602/m5602_mt9m111.h +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.h @@ -106,7 +106,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int mt9m111_probe(struct sd *sd); int mt9m111_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h index 2efd607987ec..2b6a13b508f7 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov7660.h +++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h @@ -86,7 +86,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int ov7660_probe(struct sd *sd); int ov7660_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h index da9a129b739d..f7aa5bf68983 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.h +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h @@ -135,7 +135,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int ov9650_probe(struct sd *sd); int ov9650_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h index 338359596398..81a2bcb88fe3 100644 --- a/drivers/media/video/gspca/m5602/m5602_po1030.h +++ b/drivers/media/video/gspca/m5602/m5602_po1030.h @@ -147,7 +147,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int po1030_probe(struct sd *sd); int po1030_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h index 8cc7a3f6da72..8e0035e731c7 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h @@ -65,7 +65,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int s5k4aa_probe(struct sd *sd); int s5k4aa_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h index 80a63a236e24..79952247b534 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h @@ -41,7 +41,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int s5k83a_probe(struct sd *sd); int s5k83a_init(struct sd *sd); diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 0ab425fbea9a..6f878f6c6e99 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -36,8 +36,8 @@ MODULE_AUTHOR("Erik Andrén"); MODULE_DESCRIPTION("STV06XX USB Camera Driver"); MODULE_LICENSE("GPL"); -static int dump_bridge; -static int dump_sensor; +static bool dump_bridge; +static bool dump_sensor; int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data) { diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index 3f1a5b1beeba..e5eb56a5b618 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -49,7 +49,7 @@ module_param(default_audio_input, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / " "1=RCA front / 2=S/PDIF"); -static int boost_audio; +static bool boost_audio; module_param(boost_audio, bool, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(boost_audio, "boost the audio signal"); diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 41108a9a195e..544af91cbdc1 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -99,7 +99,7 @@ static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, static unsigned int cardtype_c = 1; static unsigned int tuner_c = 1; -static unsigned int radio_c = 1; +static bool radio_c = 1; static unsigned int i2c_clock_period_c = 1; static char pal[] = "---"; static char secam[] = "--"; diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 6b7c9c823330..d0fbfcf7133d 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -58,7 +58,7 @@ /* card parameters */ static int ivtvfb_card_id = -1; static int ivtvfb_debug = 0; -static int osd_laced; +static bool osd_laced; static int osd_depth; static int osd_upper; static int osd_left; diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c index 80ec64d2d6d8..2c8fc0f6d690 100644 --- a/drivers/media/video/marvell-ccic/mcam-core.c +++ b/drivers/media/video/marvell-ccic/mcam-core.c @@ -51,7 +51,7 @@ static int delivered; * sense. */ -static int alloc_bufs_at_read; +static bool alloc_bufs_at_read; module_param(alloc_bufs_at_read, bool, 0444); MODULE_PARM_DESC(alloc_bufs_at_read, "Non-zero value causes DMA buffers to be allocated when the " @@ -73,11 +73,11 @@ MODULE_PARM_DESC(dma_buf_size, "parameters require larger buffers, an attempt to reallocate " "will be made."); #else /* MCAM_MODE_VMALLOC */ -static const int alloc_bufs_at_read = 0; +static const bool alloc_bufs_at_read = 0; static const int n_dma_bufs = 3; /* Used by S/G_PARM */ #endif /* MCAM_MODE_VMALLOC */ -static int flip; +static bool flip; module_param(flip, bool, 0444); MODULE_PARM_DESC(flip, "If set, the sensor will be instructed to flip the image " diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index d0f538857285..d7cd0f633f63 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -69,12 +69,12 @@ MODULE_LICENSE("GPL"); /* module parameters */ static int opmode = OPMODE_AUTO; int msp_debug; /* msp_debug output */ -int msp_once; /* no continuous stereo monitoring */ -int msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), +bool msp_once; /* no continuous stereo monitoring */ +bool msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), the autoscan seems work well only with FM... */ int msp_standard = 1; /* Override auto detect of audio msp_standard, if needed. */ -int msp_dolby; +bool msp_dolby; int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual (msp34xxg only) 0x00a0-0x03c0 */ diff --git a/drivers/media/video/msp3400-driver.h b/drivers/media/video/msp3400-driver.h index 831e8db4368c..fbe5e0715f93 100644 --- a/drivers/media/video/msp3400-driver.h +++ b/drivers/media/video/msp3400-driver.h @@ -44,10 +44,10 @@ /* module parameters */ extern int msp_debug; -extern int msp_once; -extern int msp_amsound; +extern bool msp_once; +extern bool msp_amsound; extern int msp_standard; -extern int msp_dolby; +extern bool msp_dolby; extern int msp_stereo_thresh; struct msp_state { diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index ee0d0b39cd17..0de598bf66bb 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -70,9 +70,9 @@ static u32 video1_numbuffers = 3; static u32 video2_numbuffers = 3; static u32 video1_bufsize = OMAP_VOUT_MAX_BUF_SIZE; static u32 video2_bufsize = OMAP_VOUT_MAX_BUF_SIZE; -static u32 vid1_static_vrfb_alloc; -static u32 vid2_static_vrfb_alloc; -static int debug; +static bool vid1_static_vrfb_alloc; +static bool vid2_static_vrfb_alloc; +static bool debug; /* Module parameters */ module_param(video1_numbuffers, uint, S_IRUGO); diff --git a/drivers/media/video/omap/omap_vout_vrfb.c b/drivers/media/video/omap/omap_vout_vrfb.c index ebebcac49225..4be26abf6cea 100644 --- a/drivers/media/video/omap/omap_vout_vrfb.c +++ b/drivers/media/video/omap/omap_vout_vrfb.c @@ -84,7 +84,7 @@ void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) } int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, - u32 static_vrfb_allocation) + bool static_vrfb_allocation) { int ret = 0, i, j; struct omap_vout_device *vout; diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index 8aa058531280..6a564964853a 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -25,7 +25,7 @@ MODULE_AUTHOR("Jonathan Corbet "); MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 5cfdbc78b918..0ef5484696b6 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -57,7 +57,7 @@ MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " "Hans Verkuil, Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index b7fb5a5cad7e..3c61aec517ac 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -38,11 +38,11 @@ #include "stk-webcam.h" -static int hflip = 1; +static bool hflip = 1; module_param(hflip, bool, 0444); MODULE_PARM_DESC(hflip, "Horizontal image flip (mirror). Defaults to 1"); -static int vflip = 1; +static bool vflip = 1; module_param(vflip, bool, 0444); MODULE_PARM_DESC(vflip, "Vertical image flip. Defaults to 1"); diff --git a/drivers/media/video/tm6000/tm6000-alsa.c b/drivers/media/video/tm6000/tm6000-alsa.c index 7d675c72fd47..bb2047c10358 100644 --- a/drivers/media/video/tm6000/tm6000-alsa.c +++ b/drivers/media/video/tm6000/tm6000-alsa.c @@ -42,7 +42,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ -static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; +static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled."); diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index 926f03931156..dd26cacd0556 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -52,7 +52,7 @@ #define LOCK_RETRY_DELAY (200) /* Debug functions */ -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c index 7875e80cb2ff..236c559d5f51 100644 --- a/drivers/media/video/tvp7002.c +++ b/drivers/media/video/tvp7002.c @@ -63,7 +63,7 @@ MODULE_LICENSE("GPL"); #define TVP7002_CL_MASK 0x0f /* Debug functions */ -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-2)"); diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 9bbe61700fd5..65d065aa6091 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -34,7 +34,7 @@ MODULE_DESCRIPTION("uPD64083 driver"); MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c index cbf13d09b4ac..bfae41ba53c3 100644 --- a/drivers/media/video/via-camera.c +++ b/drivers/media/video/via-camera.c @@ -34,13 +34,13 @@ MODULE_AUTHOR("Jonathan Corbet "); MODULE_DESCRIPTION("VIA framebuffer-based camera controller driver"); MODULE_LICENSE("GPL"); -static int flip_image; +static bool flip_image; module_param(flip_image, bool, 0444); MODULE_PARM_DESC(flip_image, "If set, the sensor will be instructed to flip the image " "vertically."); -static int override_serial; +static bool override_serial; module_param(override_serial, bool, 0444); MODULE_PARM_DESC(override_serial, "The camera driver will normally refuse to load if " diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c index e8a27844bf39..e86173bd1327 100644 --- a/drivers/media/video/zoran/zoran_device.c +++ b/drivers/media/video/zoran/zoran_device.c @@ -57,7 +57,7 @@ ZR36057_ISR_GIRQ1 | \ ZR36057_ISR_JPEGRepIRQ ) -static int lml33dpath; /* default = 0 +static bool lml33dpath; /* default = 0 * 1 will use digital path in capture * mode instead of analog. It can be * used for picture adjustments using diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c index 5e4f57cbf314..f08546fe2234 100644 --- a/drivers/media/video/zoran/zr36060.c +++ b/drivers/media/video/zoran/zr36060.c @@ -50,7 +50,7 @@ /* amount of chips attached via this driver */ static int zr36060_codecs; -static int low_bitrate; +static bool low_bitrate; module_param(low_bitrate, bool, 0); MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate"); diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index 6ce70e9615d3..5319e9b65847 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -21,7 +21,7 @@ #define DRIVER_NAME "jmb38x_ms" -static int no_dma; +static bool no_dma; module_param(no_dma, bool, 0644); enum { diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c index 668f5c6a0399..29b2172ae18f 100644 --- a/drivers/memstick/host/r592.c +++ b/drivers/memstick/host/r592.c @@ -23,7 +23,7 @@ #include #include "r592.h" -static int r592_enable_dma = 1; +static bool r592_enable_dma = 1; static int debug; static const char *tpc_names[] = { diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c index b7aacf47703a..6902b83eb1b4 100644 --- a/drivers/memstick/host/tifm_ms.c +++ b/drivers/memstick/host/tifm_ms.c @@ -22,7 +22,7 @@ #define DRIVER_NAME "tifm_ms" -static int no_dma; +static bool no_dma; module_param(no_dma, bool, 0644); /* diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c index b1f4563be9ae..701eb600b127 100644 --- a/drivers/misc/iwmc3200top/main.c +++ b/drivers/misc/iwmc3200top/main.c @@ -376,20 +376,20 @@ static int blocks; module_param(blocks, int, 0604); MODULE_PARM_DESC(blocks, "max_blocks_to_send"); -static int dump; +static bool dump; module_param(dump, bool, 0604); MODULE_PARM_DESC(dump, "dump_hex_content"); -static int jump = 1; +static bool jump = 1; module_param(jump, bool, 0604); -static int direct = 1; +static bool direct = 1; module_param(direct, bool, 0604); -static int checksum = 1; +static bool checksum = 1; module_param(checksum, bool, 0604); -static int fw_download = 1; +static bool fw_download = 1; module_param(fw_download, bool, 0604); static int block_size = IWMC_SDIO_BLK_SIZE; @@ -398,7 +398,7 @@ module_param(block_size, int, 0404); static int download_trans_blks = IWMC_DEFAULT_TR_BLK; module_param(download_trans_blks, int, 0604); -static int rubbish_barker; +static bool rubbish_barker; module_param(rubbish_barker, bool, 0604); #ifdef CONFIG_IWMC3200TOP_DEBUG diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 950b97d7412a..75d7d7e17366 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -48,7 +48,7 @@ static struct workqueue_struct *workqueue; * performance cost, and for other reasons may not always be desired. * So we allow it it to be disabled. */ -int use_spi_crc = 1; +bool use_spi_crc = 1; module_param(use_spi_crc, bool, 0); /* @@ -58,9 +58,9 @@ module_param(use_spi_crc, bool, 0); * overridden if necessary. */ #ifdef CONFIG_MMC_UNSAFE_RESUME -int mmc_assume_removable; +bool mmc_assume_removable; #else -int mmc_assume_removable = 1; +bool mmc_assume_removable = 1; #endif EXPORT_SYMBOL(mmc_assume_removable); module_param_named(removable, mmc_assume_removable, bool, 0644); diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 14664f1fb16f..afa6bd2b7b70 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -64,7 +64,7 @@ int mmc_attach_sd(struct mmc_host *host); int mmc_attach_sdio(struct mmc_host *host); /* Module parameters */ -extern int use_spi_crc; +extern bool use_spi_crc; /* Debugfs information for hosts and cards */ void mmc_add_host_debugfs(struct mmc_host *host); diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index f70d04664cac..69d249f51d6a 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -22,8 +22,8 @@ #define DRIVER_NAME "tifm_sd" #define DRIVER_VERSION "0.8" -static int no_dma = 0; -static int fixed_timeout = 0; +static bool no_dma = 0; +static bool fixed_timeout = 0; module_param(no_dma, bool, 0644); module_param(fixed_timeout, bool, 0644); diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index 2ec978bc32ba..3135a1a5d75d 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -223,25 +223,25 @@ enum SD_RESPONSE_TYPE { #define FUN(c) (0x000007 & (c->arg>>28)) #define REG(c) (0x01FFFF & (c->arg>>9)) -static int limit_speed_to_24_MHz; +static bool limit_speed_to_24_MHz; module_param(limit_speed_to_24_MHz, bool, 0644); MODULE_PARM_DESC(limit_speed_to_24_MHz, "Limit Max SDIO Clock Speed to 24 MHz"); -static int pad_input_to_usb_pkt; +static bool pad_input_to_usb_pkt; module_param(pad_input_to_usb_pkt, bool, 0644); MODULE_PARM_DESC(pad_input_to_usb_pkt, "Pad USB data input transfers to whole USB Packet"); -static int disable_offload_processing; +static bool disable_offload_processing; module_param(disable_offload_processing, bool, 0644); MODULE_PARM_DESC(disable_offload_processing, "Disable Offload Processing"); -static int force_1_bit_data_xfers; +static bool force_1_bit_data_xfers; module_param(force_1_bit_data_xfers, bool, 0644); MODULE_PARM_DESC(force_1_bit_data_xfers, "Force SDIO Data Transfers to 1-bit Mode"); -static int force_polling_for_irqs; +static bool force_polling_for_irqs; module_param(force_polling_for_irqs, bool, 0644); MODULE_PARM_DESC(force_polling_for_irqs, "Force Polling for SDIO interrupts"); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 8544d6bf50a0..5c3d719c37e6 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -185,7 +185,7 @@ struct pxa3xx_nand_info { uint32_t ndcb2; }; -static int use_dma = 1; +static bool use_dma = 1; module_param(use_dma, bool, 0444); MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW"); diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index f20f393bfda6..769a4e096b3c 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -22,7 +22,7 @@ #include "r852.h" -static int r852_enable_dma = 1; +static bool r852_enable_dma = 1; module_param(r852_enable_dma, bool, S_IRUGO); MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)"); diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c index 0dc34f12f92e..d4716273651e 100644 --- a/drivers/parport/parport_ip32.c +++ b/drivers/parport/parport_ip32.c @@ -135,7 +135,7 @@ #define PARPORT_IP32_ENABLE_EPP (1U << 3) #define PARPORT_IP32_ENABLE_ECP (1U << 4) static unsigned int features = ~0U; -static int verbose_probing = DEFAULT_VERBOSE_PROBING; +static bool verbose_probing = DEFAULT_VERBOSE_PROBING; /* We do not support more than one port. */ static struct parport *this_port = NULL; diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 095f29e13734..2a47e82821da 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -44,7 +44,7 @@ #define METHOD_NAME__SUN "_SUN" #define METHOD_NAME_OSHP "OSHP" -static int debug_acpi; +static bool debug_acpi; static acpi_status decode_type0_hpx_record(union acpi_object *record, struct hotplug_params *hpx) diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index efa9f2de51c1..aa41631e9e02 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -47,7 +47,7 @@ /* name size which is used for entries in pcihpfs */ #define SLOT_NAME_SIZE 21 /* {_SUN} */ -static int debug; +static bool debug; int acpiphp_debug; /* local variables */ diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c index e525263210ee..c35e8ad6db01 100644 --- a/drivers/pci/hotplug/acpiphp_ibm.c +++ b/drivers/pci/hotplug/acpiphp_ibm.c @@ -43,7 +43,7 @@ #define DRIVER_AUTHOR "Irene Zubarev , Vernon Mauery " #define DRIVER_DESC "ACPI Hot Plug PCI Controller Driver IBM extension" -static int debug; +static bool debug; MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c index 41f6a8d79c81..6bf8d2ab164f 100644 --- a/drivers/pci/hotplug/cpcihp_zt5550.c +++ b/drivers/pci/hotplug/cpcihp_zt5550.c @@ -57,8 +57,8 @@ #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) /* local variables */ -static int debug; -static int poll; +static bool debug; +static bool poll; static struct cpci_hp_controller_ops zt5550_hpc_ops; static struct cpci_hp_controller zt5550_hpc; diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index f1ce99cceac6..187a199da93c 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -57,8 +57,8 @@ struct irq_routing_table *cpqhp_routing_table; static void __iomem *smbios_table; static void __iomem *smbios_start; static void __iomem *cpqhp_rom_start; -static int power_mode; -static int debug; +static bool power_mode; +static bool debug; static int initialized; #define DRIVER_VERSION "0.9.8" diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index d934dd4fa873..5506e0e8fbc0 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -49,7 +49,7 @@ int ibmphp_debug; -static int debug; +static bool debug; module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC (debug, "Debugging mode enabled or not"); MODULE_LICENSE ("GPL"); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 6d2eea93298f..202f4a969eb5 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -51,7 +51,7 @@ /* local variables */ -static int debug; +static bool debug; #define DRIVER_VERSION "0.5" #define DRIVER_AUTHOR "Greg Kroah-Hartman , Scott Murray " diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 9a33fdde2d16..4b7cce1de6ec 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -40,10 +40,10 @@ #define MY_NAME "pciehp" -extern int pciehp_poll_mode; +extern bool pciehp_poll_mode; extern int pciehp_poll_time; -extern int pciehp_debug; -extern int pciehp_force; +extern bool pciehp_debug; +extern bool pciehp_force; extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index b8c99d35ac97..365c6b96c642 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -38,10 +38,10 @@ #include /* Global variables */ -int pciehp_debug; -int pciehp_poll_mode; +bool pciehp_debug; +bool pciehp_poll_mode; int pciehp_poll_time; -int pciehp_force; +bool pciehp_force; struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c index 5175d9b26f0b..b20ceaaa31f4 100644 --- a/drivers/pci/hotplug/pcihp_skeleton.c +++ b/drivers/pci/hotplug/pcihp_skeleton.c @@ -59,7 +59,7 @@ static LIST_HEAD(slot_list); #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) /* local variables */ -static int debug; +static bool debug; static int num_slots; #define DRIVER_VERSION "0.3" diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h index 419919a87b0f..df5677440a08 100644 --- a/drivers/pci/hotplug/rpaphp.h +++ b/drivers/pci/hotplug/rpaphp.h @@ -46,7 +46,7 @@ #define PRESENT 1 /* Card in slot */ #define MY_NAME "rpaphp" -extern int rpaphp_debug; +extern bool rpaphp_debug; #define dbg(format, arg...) \ do { \ if (rpaphp_debug) \ diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 758adb5f47fd..127d6e600185 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -37,7 +37,7 @@ /* and pci_do_scan_bus */ #include "rpaphp.h" -int rpaphp_debug; +bool rpaphp_debug; LIST_HEAD(rpaphp_slot_head); #define DRIVER_VERSION "0.1" diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index e0c90e643b5f..ca64932e658b 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -43,9 +43,9 @@ #define MY_NAME THIS_MODULE->name #endif -extern int shpchp_poll_mode; +extern bool shpchp_poll_mode; extern int shpchp_poll_time; -extern int shpchp_debug; +extern bool shpchp_debug; extern struct workqueue_struct *shpchp_wq; extern struct workqueue_struct *shpchp_ordered_wq; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index dd7e0c51a33e..7414fd9ad1d2 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -36,8 +36,8 @@ #include "shpchp.h" /* Global variables */ -int shpchp_debug; -int shpchp_poll_mode; +bool shpchp_debug; +bool shpchp_poll_mode; int shpchp_poll_time; struct workqueue_struct *shpchp_wq; struct workqueue_struct *shpchp_ordered_wq; diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 95489cd9a555..52229863e9fe 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -28,7 +28,7 @@ #include "aerdrv.h" /* Override the existing corrected and uncorrected error masks */ -static int aer_mask_override; +static bool aer_mask_override; module_param(aer_mask_override, bool, 0); struct aer_error_inj { diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 9674e9f30d49..0ca053538146 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -27,8 +27,8 @@ #include #include "aerdrv.h" -static int forceload; -static int nosourceid; +static bool forceload; +static bool nosourceid; module_param(forceload, bool, 0); module_param(nosourceid, bool, 0); diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 9dc565c615bd..849c0c11d2af 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -24,15 +24,15 @@ #include "yenta_socket.h" #include "i82365.h" -static int disable_clkrun; +static bool disable_clkrun; module_param(disable_clkrun, bool, 0444); MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option"); -static int isa_probe = 1; +static bool isa_probe = 1; module_param(isa_probe, bool, 0444); MODULE_PARM_DESC(isa_probe, "If set ISA interrupts are probed (default). Set to N to disable probing"); -static int pwr_irqs_off; +static bool pwr_irqs_off; module_param(pwr_irqs_off, bool, 0644); MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!"); diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 8877b836d27c..d96734478324 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -189,7 +189,7 @@ struct compal_data{ /* =============== */ /* General globals */ /* =============== */ -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c index 7f88c7923fc6..6ee0b5c90933 100644 --- a/drivers/platform/x86/intel_oaktrail.c +++ b/drivers/platform/x86/intel_oaktrail.c @@ -95,7 +95,7 @@ #define OT_EC_BL_CONTROL_ON_DATA 0x1A -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index f204643c5052..bb5132128b33 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -89,7 +89,7 @@ static int msi_laptop_resume(struct platform_device *device); #define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS 0x2f -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index 09e26bfd4643..fd73ea89b857 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -228,12 +228,12 @@ static struct platform_device *sdev; static struct rfkill *rfk; static bool has_stepping_quirk; -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Disable the DMI check and forces the driver to be loaded"); -static int debug; +static bool debug; module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 62533c105da4..ea0c6075b720 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -378,13 +378,13 @@ static unsigned int bright_maxlvl; /* 0 = unknown */ #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES static int dbg_wlswemul; -static int tpacpi_wlsw_emulstate; +static bool tpacpi_wlsw_emulstate; static int dbg_bluetoothemul; -static int tpacpi_bluetooth_emulstate; +static bool tpacpi_bluetooth_emulstate; static int dbg_wwanemul; -static int tpacpi_wwan_emulstate; +static bool tpacpi_wwan_emulstate; static int dbg_uwbemul; -static int tpacpi_uwb_emulstate; +static bool tpacpi_uwb_emulstate; #endif @@ -6444,7 +6444,7 @@ static struct ibm_struct brightness_driver_data = { static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */ static char *alsa_id = "ThinkPadEC"; -static int alsa_enable = SNDRV_DEFAULT_ENABLE1; +static bool alsa_enable = SNDRV_DEFAULT_ENABLE1; struct tpacpi_alsa_data { struct snd_card *card; @@ -6487,7 +6487,7 @@ static enum tpacpi_volume_access_mode volume_mode = TPACPI_VOL_MODE_MAX; static enum tpacpi_volume_capabilities volume_capabilities; -static int volume_control_allowed; +static bool volume_control_allowed; /* * Used to syncronize writers to TP_EC_AUDIO and @@ -7265,7 +7265,7 @@ enum fan_control_commands { * and also watchdog cmd */ }; -static int fan_control_allowed; +static bool fan_control_allowed; static enum fan_status_access_mode fan_status_access_mode; static enum fan_control_access_mode fan_control_access_mode; @@ -8437,7 +8437,7 @@ static struct proc_dir_entry *proc_dir; * Module and infrastructure proble, init and exit handling */ -static int force_load; +static bool force_load; #ifdef CONFIG_THINKPAD_ACPI_DEBUG static const char * __init str_supported(int is_supported) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index a134c26870b0..42a4dcc25f92 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -82,12 +82,12 @@ struct wmi_block { #define ACPI_WMI_STRING 0x4 /* GUID takes & returns a string */ #define ACPI_WMI_EVENT 0x8 /* GUID is an event */ -static int debug_event; +static bool debug_event; module_param(debug_event, bool, 0444); MODULE_PARM_DESC(debug_event, "Log WMI Events [0/1]"); -static int debug_dump_wdg; +static bool debug_dump_wdg; module_param(debug_dump_wdg, bool, 0444); MODULE_PARM_DESC(debug_dump_wdg, "Dump available WMI interfaces [0/1]"); diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 545874b1df9e..076e211a40b7 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -64,7 +64,7 @@ static unsigned int cache_time = 1000; module_param(cache_time, uint, 0644); MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); -static unsigned int pmod_enabled; +static bool pmod_enabled; module_param(pmod_enabled, bool, 0644); MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit"); diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index e5cb9248a442..f3b8bb84faf2 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -75,7 +75,7 @@ static LIST_HEAD(raw3270_devices); static int raw3270_registered; /* Module parameters */ -static int tubxcorrect = 0; +static bool tubxcorrect = 0; module_param(tubxcorrect, bool, 0); /* diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c index 11312f401c70..2211277a1079 100644 --- a/drivers/s390/char/vmwatchdog.c +++ b/drivers/s390/char/vmwatchdog.c @@ -28,9 +28,9 @@ #define MAX_CMDLEN 240 #define MIN_INTERVAL 15 static char vmwdt_cmd[MAX_CMDLEN] = "IPL"; -static int vmwdt_conceal; +static bool vmwdt_conceal; -static int vmwdt_nowayout = WATCHDOG_NOWAYOUT; +static bool vmwdt_nowayout = WATCHDOG_NOWAYOUT; MODULE_LICENSE("GPL"); MODULE_AUTHOR("Arnd Bergmann "); diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 195823a51aab..ed119cedaae0 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -102,7 +102,7 @@ static int setup_dmaspeed[MAXBOARDS] __initdata = { -1, -1, -1, -1 }; */ #if defined(MODULE) -static int isapnp = 0; +static bool isapnp = 0; static int aha1542[] = {0x330, 11, 4, -1}; module_param_array(aha1542, int, NULL, 0); module_param(isapnp, bool, 0); diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index f5b718d3c31b..13aeca3d51f2 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -546,7 +546,7 @@ static struct ParameterData __devinitdata cfg_data[] = { * command line overrides will be used. If set to 1 then safe and * slow settings will be used. */ -static int use_safe_settings = 0; +static bool use_safe_settings = 0; module_param_named(safe, use_safe_settings, bool, 0); MODULE_PARM_DESC(safe, "Use safe and slow settings only. Default: false"); diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index f6a50c98c36f..002924963cd8 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -59,11 +59,11 @@ MODULE_PARM_DESC(trans_mode, "transfer mode (0: BIOS(default) 1: Async 2: Ultra2 #define ASYNC_MODE 1 #define ULTRA20M_MODE 2 -static int auto_param = 0; /* default: ON */ +static bool auto_param = 0; /* default: ON */ module_param (auto_param, bool, 0); MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)"); -static int disc_priv = 1; /* default: OFF */ +static bool disc_priv = 1; /* default: OFF */ module_param (disc_priv, bool, 0); MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))"); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index ca86721a71b9..b61a753eb896 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -70,7 +70,7 @@ module_param(nsp_burst_mode, int, 0); MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))"); /* Release IO ports after configuration? */ -static int free_ports = 0; +static bool free_ports = 0; module_param(free_ports, bool, 0); MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))"); diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 0d18d80bcd25..9bcf87ae4c00 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -61,7 +61,7 @@ EXPORT_SYMBOL(comedi_debug); module_param(comedi_debug, int, 0644); #endif -int comedi_autoconfig = 1; +bool comedi_autoconfig = 1; module_param(comedi_autoconfig, bool, 0444); static int comedi_num_legacy_minors; diff --git a/drivers/staging/comedi/comedi_fops.h b/drivers/staging/comedi/comedi_fops.h index da4b4f5553f5..006cf14c577a 100644 --- a/drivers/staging/comedi/comedi_fops.h +++ b/drivers/staging/comedi/comedi_fops.h @@ -1,10 +1,11 @@ #ifndef _COMEDI_FOPS_H #define _COMEDI_FOPS_H +#include extern struct class *comedi_class; extern const struct file_operations comedi_fops; -extern int comedi_autoconfig; +extern bool comedi_autoconfig; extern struct comedi_driver *comedi_drivers; #endif /* _COMEDI_FOPS_H */ diff --git a/drivers/staging/media/go7007/snd-go7007.c b/drivers/staging/media/go7007/snd-go7007.c index deac938d8505..d071c838ac2a 100644 --- a/drivers/staging/media/go7007/snd-go7007.c +++ b/drivers/staging/media/go7007/snd-go7007.c @@ -38,7 +38,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; -static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; +static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; module_param_array(index, int, NULL, 0444); module_param_array(id, charp, NULL, 0444); diff --git a/drivers/staging/media/lirc/lirc_bt829.c b/drivers/staging/media/lirc/lirc_bt829.c index c5a0d27a02dc..4d20e9f74118 100644 --- a/drivers/staging/media/lirc/lirc_bt829.c +++ b/drivers/staging/media/lirc/lirc_bt829.c @@ -53,7 +53,7 @@ static unsigned char do_get_bits(void); #define DRIVER_NAME "lirc_bt829" -static int debug; +static bool debug; #define dprintk(fmt, args...) \ do { \ if (debug) \ diff --git a/drivers/staging/media/lirc/lirc_igorplugusb.c b/drivers/staging/media/lirc/lirc_igorplugusb.c index 6cd4cd67a1dd..7a2501776679 100644 --- a/drivers/staging/media/lirc/lirc_igorplugusb.c +++ b/drivers/staging/media/lirc/lirc_igorplugusb.c @@ -62,9 +62,9 @@ /* debugging support */ #ifdef CONFIG_USB_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif #define dprintk(fmt, args...) \ diff --git a/drivers/staging/media/lirc/lirc_parallel.c b/drivers/staging/media/lirc/lirc_parallel.c index 02b07a6c1771..dd2bca7b56fa 100644 --- a/drivers/staging/media/lirc/lirc_parallel.c +++ b/drivers/staging/media/lirc/lirc_parallel.c @@ -63,8 +63,8 @@ /*** Global Variables ***/ -static int debug; -static int check_pselecd; +static bool debug; +static bool check_pselecd; unsigned int irq = LIRC_IRQ; unsigned int io = LIRC_PORT; diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c index 8a060a8a7224..2aac67c98283 100644 --- a/drivers/staging/media/lirc/lirc_serial.c +++ b/drivers/staging/media/lirc/lirc_serial.c @@ -107,13 +107,13 @@ struct lirc_serial { static int type; static int io; static int irq; -static int iommap; +static bool iommap; static int ioshift; -static int softcarrier = 1; -static int share_irq; -static int debug; +static bool softcarrier = 1; +static bool share_irq; +static bool debug; static int sense = -1; /* -1 = auto, 0 = active high, 1 = active low */ -static int txsense; /* 0 = active high, 1 = active low */ +static bool txsense; /* 0 = active high, 1 = active low */ #define dprintk(fmt, args...) \ do { \ diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c index 6903d3992eca..c94382b917ac 100644 --- a/drivers/staging/media/lirc/lirc_sir.c +++ b/drivers/staging/media/lirc/lirc_sir.c @@ -173,7 +173,7 @@ static DEFINE_SPINLOCK(hardware_lock); static int rx_buf[RBUF_LEN]; static unsigned int rx_tail, rx_head; -static int debug; +static bool debug; #define dprintk(fmt, args...) \ do { \ if (debug) \ diff --git a/drivers/staging/media/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c index 0302d82a12f7..76ea4a8f2c75 100644 --- a/drivers/staging/media/lirc/lirc_zilog.c +++ b/drivers/staging/media/lirc/lirc_zilog.c @@ -155,8 +155,8 @@ static struct mutex tx_data_lock; #define zilog_info(s, args...) printk(KERN_INFO KBUILD_MODNAME ": " s, ## args) /* module parameters */ -static int debug; /* debug output */ -static int tx_only; /* only handle the IR Tx function */ +static bool debug; /* debug output */ +static bool tx_only; /* only handle the IR Tx function */ static int minor = -1; /* minor number */ #define dprintk(fmt, args...) \ diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index 02fafecd4773..897a3a99c794 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -16,7 +16,7 @@ #include #include -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "v2.00" diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index c44e41af2880..1c5780f1571b 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -16,7 +16,7 @@ #include #include -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "v2.14" diff --git a/drivers/staging/speakup/speakup.h b/drivers/staging/speakup/speakup.h index 412b87947f66..e66579e6147a 100644 --- a/drivers/staging/speakup/speakup.h +++ b/drivers/staging/speakup/speakup.h @@ -116,7 +116,7 @@ extern int bleep_time, bell_pos; extern int spell_delay, key_echo; extern short punc_mask; extern short pitch_shift, synth_flags; -extern int quiet_boot; +extern bool quiet_boot; extern char *synth_name; extern struct bleep unprocessed_sound; diff --git a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c index c241074a4b5e..2222d6919ef5 100644 --- a/drivers/staging/speakup/synth.c +++ b/drivers/staging/speakup/synth.c @@ -22,7 +22,7 @@ static struct spk_synth *synths[MAXSYNTHS]; struct spk_synth *synth; char pitch_buff[32] = ""; static int module_status; -int quiet_boot; +bool quiet_boot; struct speakup_info_t speakup_info = { .spinlock = __SPIN_LOCK_UNLOCKED(speakup_info.spinlock), diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c index 08a449b4abf9..f50582169b24 100644 --- a/drivers/staging/vme/bridges/vme_tsi148.c +++ b/drivers/staging/vme/bridges/vme_tsi148.c @@ -41,7 +41,7 @@ static void __exit tsi148_exit(void); /* Module parameter */ -static int err_chk; +static bool err_chk; static int geoid; static const char driver_name[] = "vme_tsi148"; diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 6a1241c7f841..de88aa5566e5 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -118,7 +118,7 @@ static unsigned long board2; static unsigned long board3; static unsigned long board4; static unsigned long controller; -static int support_low_speed; +static bool support_low_speed; static unsigned long modem1; static unsigned long modem2; static unsigned long modem3; diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index e67fb20490d2..ff8017f87914 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -850,7 +850,7 @@ static int mgsl_device_count; * .text section address and breakpoint on module load. * This is useful for use with gdb and add-symbol-file command. */ -static int break_on_load; +static bool break_on_load; /* * Driver major number, defaults to zero to get auto diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index 0f6b796c95c5..a7efe538df00 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -456,7 +456,7 @@ static int synclinkmp_device_count = 0; * .text section address and breakpoint on module load. * This is useful for use with gdb and add-symbol-file command. */ -static int break_on_load = 0; +static bool break_on_load = 0; /* * Driver major number, defaults to zero to get auto diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index b42092e1f164..98dd9e49b684 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -73,9 +73,9 @@ static const char speedtch_driver_name[] = "speedtch"; #define DEFAULT_SW_BUFFERING 0 static unsigned int altsetting = 0; /* zero means: use the default */ -static int dl_512_first = DEFAULT_DL_512_FIRST; -static int enable_isoc = DEFAULT_ENABLE_ISOC; -static int sw_buffering = DEFAULT_SW_BUFFERING; +static bool dl_512_first = DEFAULT_DL_512_FIRST; +static bool enable_isoc = DEFAULT_ENABLE_ISOC; +static bool sw_buffering = DEFAULT_SW_BUFFERING; #define DEFAULT_B_MAX_DSL 8128 #define DEFAULT_MODEM_MODE 11 diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 00f171a7a8a0..01ea5d7421d4 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -542,7 +542,7 @@ static int modem_index; static unsigned int debug; static unsigned int altsetting[NB_MODEM] = { [0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF}; -static int sync_wait[NB_MODEM]; +static bool sync_wait[NB_MODEM]; static char *cmv_file[NB_MODEM]; static int annex[NB_MODEM]; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 3af5e2dd1d82..8df4b76465ac 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -93,7 +93,7 @@ struct async { u8 bulk_status; }; -static int usbfs_snoop; +static bool usbfs_snoop; module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic"); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 79d339e2e700..a0613d8f9be7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -102,7 +102,7 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait); static struct task_struct *khubd_task; /* cycle leds on hubs that aren't blinking for attention */ -static int blinkenlights = 0; +static bool blinkenlights = 0; module_param (blinkenlights, bool, S_IRUGO); MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs"); @@ -131,12 +131,12 @@ MODULE_PARM_DESC(initial_descriptor_timeout, * otherwise the new scheme is used. If that fails and "use_both_schemes" * is set, then the driver will make another attempt, using the other scheme. */ -static int old_scheme_first = 0; +static bool old_scheme_first = 0; module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(old_scheme_first, "start with the old device initialization scheme"); -static int use_both_schemes = 1; +static bool use_both_schemes = 1; module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(use_both_schemes, "try the other device initialization scheme if the " @@ -2026,7 +2026,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 #define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i) ((i) / 2 == old_scheme_first) +#define USE_NEW_SCHEME(i) ((i) / 2 == (int)old_scheme_first) #define HUB_ROOT_RESET_TIME 50 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 1382c90d0834..8ca9f994a280 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -47,7 +47,7 @@ const char *usbcore_name = "usbcore"; -static int nousb; /* Disable USB when built into kernel image */ +static bool nousb; /* Disable USB when built into kernel image */ #ifdef CONFIG_USB_SUSPEND static int usb_autosuspend_delay = 2; /* Default delay value, diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index e9a2c5c44454..c16ff55a74e8 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -152,15 +152,15 @@ static const char *ep_string[] = { }; /* DMA usage flag */ -static int use_dma = 1; +static bool use_dma = 1; /* packet per buffer dma */ -static int use_dma_ppb = 1; +static bool use_dma_ppb = 1; /* with per descr. update */ -static int use_dma_ppb_du; +static bool use_dma_ppb_du; /* buffer fill mode */ static int use_dma_bufferfill_mode; /* full speed only mode */ -static int use_fullspeed; +static bool use_fullspeed; /* tx buffer size for high speed */ static unsigned long hs_tx_buf = UDC_EPIN_BUFF_SIZE; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 0cd764d59351..a28f6ffcd0f3 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -250,9 +250,9 @@ static struct usb_configuration rndis_config_driver = { /*-------------------------------------------------------------------------*/ #ifdef CONFIG_USB_ETH_EEM -static int use_eem = 1; +static bool use_eem = 1; #else -static int use_eem; +static bool use_eem; #endif module_param(use_eem, bool, 0); MODULE_PARM_DESC(use_eem, "use CDC EEM mode"); diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index e0f30fc70e45..47766f0e7caa 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -303,16 +303,16 @@ MODULE_LICENSE("Dual BSD/GPL"); static struct { char *file[FSG_MAX_LUNS]; char *serial; - int ro[FSG_MAX_LUNS]; - int nofua[FSG_MAX_LUNS]; + bool ro[FSG_MAX_LUNS]; + bool nofua[FSG_MAX_LUNS]; unsigned int num_filenames; unsigned int num_ros; unsigned int num_nofuas; unsigned int nluns; - int removable; - int can_stall; - int cdrom; + bool removable; + bool can_stall; + bool cdrom; char *transport_parm; char *protocol_parm; diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index 4c81d540bc26..7322d293213e 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -69,7 +69,7 @@ static const char * const ep_name[] = { * * If use_dma is disabled, pio will be used instead. */ -static int use_dma = 0; +static bool use_dma = 0; module_param(use_dma, bool, 0644); /* diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index cf1f36454d08..cdedd1336745 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -90,8 +90,8 @@ static const char *const ep_name [] = { * Some gadget drivers work better with the dma support here than others. * These two parameters let you use PIO or more aggressive DMA. */ -static int use_dma = 1; -static int use_dma_chaining = 0; +static bool use_dma = 1; +static bool use_dma_chaining = 0; /* "modprobe net2280 use_dma=n" etc */ module_param (use_dma, bool, S_IRUGO); @@ -112,7 +112,7 @@ module_param (fifo_mode, ushort, 0644); * USB suspend requests will be ignored. This is acceptable for * self-powered devices */ -static int enable_suspend = 0; +static bool enable_suspend = 0; /* "modprobe net2280 enable_suspend=1" etc */ module_param (enable_suspend, bool, S_IRUGO); diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 7db5bbe6251b..576cd8578b45 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -98,7 +98,7 @@ module_param (fifo_mode, uint, 0); MODULE_PARM_DESC (fifo_mode, "endpoint configuration"); #ifdef USE_DMA -static unsigned use_dma = 1; +static bool use_dma = 1; /* "modprobe omap_udc use_dma=y", or else as a kernel * boot parameter "omap_udc:use_dma=y" diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index dd2313cce1d3..a3fcaae4bc2a 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -359,7 +359,7 @@ struct pch_udc_dev { static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ struct pch_udc_dev *pch_udc; /* pointer to device object */ -static int speed_fs; +static bool speed_fs; module_param_named(speed_fs, speed_fs, bool, S_IRUGO); MODULE_PARM_DESC(speed_fs, "true for Full speed operation"); diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index ed1b816e58d8..ad9e5b2df642 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -123,11 +123,11 @@ MODULE_AUTHOR("Al Borchers"); MODULE_AUTHOR("David Brownell"); MODULE_LICENSE("GPL"); -static int use_acm = true; +static bool use_acm = true; module_param(use_acm, bool, 0); MODULE_PARM_DESC(use_acm, "Use CDC ACM, default=yes"); -static int use_obex = false; +static bool use_obex = false; module_param(use_obex, bool, 0); MODULE_PARM_DESC(use_obex, "Use CDC OBEX, default=no"); diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 20697cc132d1..31d34832907e 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -81,7 +81,7 @@ module_param(buflen, uint, 0); * work better with hosts where config changes are problematic or * controllers (like original superh) that only support one config. */ -static int loopdefault = 0; +static bool loopdefault = 0; module_param(loopdefault, bool, S_IRUGO|S_IWUSR); /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index e311a511529b..a007a9fe0f87 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -112,7 +112,7 @@ module_param (park, uint, S_IRUGO); MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets"); /* for flakey hardware, ignore overcurrent indicators */ -static int ignore_oc = 0; +static bool ignore_oc = 0; module_param (ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 5f5a63241436..34b9edd86651 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -115,13 +115,13 @@ static inline void sb800_prefetch(struct ohci_hcd *ohci, int on) /* Some boards misreport power switching/overcurrent */ -static int distrust_firmware = 1; +static bool distrust_firmware = 1; module_param (distrust_firmware, bool, 0); MODULE_PARM_DESC (distrust_firmware, "true to distrust firmware power/overcurrent setup"); /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */ -static int no_handshake = 0; +static bool no_handshake = 0; module_param (no_handshake, bool, 0); MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake"); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 6f62de5c6e35..015c7c62ed49 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -233,7 +233,7 @@ module_param(park, uint, S_IRUGO); MODULE_PARM_DESC(park, "park setting; 1-3 back-to-back async packets"); /* For flakey hardware, ignore overcurrent indicators */ -static int ignore_oc; +static bool ignore_oc; module_param(ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC(ignore_oc, "ignore bogus hardware overcurrent indications"); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 533d12cca371..16dd6a6abf00 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -74,7 +74,7 @@ MODULE_LICENSE("GPL"); #define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444) INT_MODULE_PARM(testing, 0); /* Some boards misreport power switching/overcurrent*/ -static int distrust_firmware = 1; +static bool distrust_firmware = 1; module_param(distrust_firmware, bool, 0); MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" "t setup"); diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index c8ae199cfbb8..6b5eb1017e2c 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -59,7 +59,7 @@ #define DRIVER_DESC "USB Universal Host Controller Interface driver" /* for flakey hardware, ignore overcurrent indicators */ -static int ignore_oc; +static bool ignore_oc; module_param(ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications"); diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 2dbe600fbc11..a4a3c7cd4a11 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -53,7 +53,7 @@ MODULE_AUTHOR("Tony Olech"); MODULE_DESCRIPTION("FTDI ELAN driver"); MODULE_LICENSE("GPL"); #define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444) -static int distrust_firmware = 1; +static bool distrust_firmware = 1; module_param(distrust_firmware, bool, 0); MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" "t setup"); diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 2453a39b4794..4fd0dc835ae5 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -62,7 +62,7 @@ MODULE_LICENSE("GPL"); /* Module parameters */ static DEFINE_MUTEX(iowarrior_mutex); -static int debug = 0; +static bool debug = 0; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "debug=1 enables debugging messages"); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 53be7aef6308..66bc376005d2 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -750,7 +750,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) * So this module parameter lets the heuristic be disabled. When using * gadgetfs, the heuristic will probably need to be disabled. */ -static int cppi_rx_rndis = 1; +static bool cppi_rx_rndis = 1; module_param(cppi_rx_rndis, bool, 0); MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic"); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index f6ff7923048b..56cf0243979e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1586,7 +1586,7 @@ irqreturn_t musb_interrupt(struct musb *musb) EXPORT_SYMBOL_GPL(musb_interrupt); #ifndef CONFIG_MUSB_PIO_ONLY -static int __initdata use_dma = 1; +static bool __initdata use_dma = 1; /* "modprobe ... use_dma=0" etc */ module_param(use_dma, bool, 0); diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index b43d07df4c44..123bf9155339 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -52,7 +52,7 @@ #include #include -static int debug; +static bool debug; /* Vendor and Product ID */ #define AIRCABLE_VID 0x16CA diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 18e875b92e00..69328dcfd91a 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -37,7 +37,7 @@ #include #include -static int debug; +static bool debug; /* * Version information */ diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index f9f29b289f2f..29ffeb6279c7 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -37,7 +37,7 @@ #include #include "belkin_sa.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 0e77511060c0..5e53cc59e652 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -70,7 +70,7 @@ #define CH341_NBREAK_BITS_REG2 0x40 -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index adfe660ed008..fba1147ed916 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -49,7 +49,7 @@ static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 98bf83349838..6bc3802a581a 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -43,7 +43,7 @@ #define CYBERJACK_LOCAL_BUF_SIZE 32 -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 07680d6b792b..3bdeafa29c24 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -46,10 +46,10 @@ #include "cypress_m8.h" -static int debug; -static int stats; +static bool debug; +static bool stats; static int interval; -static int unstable_bauds; +static bool unstable_bauds; /* * Version Information diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 6d26a77d0f2a..b23bebd721a1 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -251,7 +251,7 @@ static int digi_read_oob_callback(struct urb *urb); /* Statics */ -static int debug; +static bool debug; static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 504b5585ea45..aced6817bf95 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -28,7 +28,7 @@ #include #include -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c290df97108e..01b6404df395 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -55,7 +55,7 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober , Andreas Mohr, Johan Hovold " #define DRIVER_DESC "USB FTDI Serial Converters Driver" -static int debug; +static bool debug; static __u16 vendor = FTDI_VID; static __u16 product; diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index e21ce9ddfc63..5d4b099dcf8b 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -16,7 +16,7 @@ #include #include -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1404, 0xcddc) }, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index bf12565f8e87..21343378c322 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -42,7 +42,7 @@ static int initial_mode = 1; /* debug flag */ -static int debug; +static bool debug; #define GARMIN_VENDOR_ID 0x091E diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index abd2ee2b2f99..0497575e4799 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -191,7 +191,7 @@ static const struct divisor_table_entry divisor_table[] = { }; /* local variables */ -static int debug; +static bool debug; static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index e44d375edaad..65bf06aa591a 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -210,10 +210,10 @@ static unsigned char OperationalMajorVersion; static unsigned char OperationalMinorVersion; static unsigned short OperationalBuildNumber; -static int debug; +static bool debug; static int closing_wait = EDGE_CLOSING_WAIT; -static int ignore_cpu_rev; +static bool ignore_cpu_rev; static int default_uart_mode; /* RS232 */ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 36f5cbe90485..06053a920dd8 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -34,7 +34,7 @@ #define DRIVER_DESC "USB PocketPC PDA driver" static __u16 product, vendor; -static int debug; +static bool debug; static int connect_retries = KP_RETRIES; static int initial_wait; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 5170799d6e94..6f9356f3f99e 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -147,7 +147,7 @@ static struct usb_driver usb_ipw_driver = { .no_dynamic_id = 1, }; -static int debug; +static bool debug; static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) { diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 0c537da0d3cd..84a396e83671 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -45,7 +45,7 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman , Johan Hovold " #define DRIVER_DESC "USB IR Dongle driver" -static int debug; +static bool debug; /* if overridden by the user, then use their value for the size of the read and * write urbs */ diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 64d0ffd4440b..3077a4436976 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -34,9 +34,9 @@ #ifdef CONFIG_USB_SERIAL_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif /* @@ -65,7 +65,7 @@ static int clockmode = 1; static int cdmode = 1; static int iuu_cardin; static int iuu_cardout; -static int xmas; +static bool xmas; static int vcc_default = 5; static void read_rxcmd_callback(struct urb *urb); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index bc8dc203e818..4cc36c761801 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -45,7 +45,7 @@ #include #include "keyspan.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index a40615674a68..7c62a7048302 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -31,7 +31,7 @@ #include #include -static int debug; +static bool debug; /* make a simple define to handle if we are compiling keyspan_pda or xircom support */ #if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 19373cb7c5bf..fc064e1442ca 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -49,7 +49,7 @@ #include #include "kl5kusb105.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index a975bb80303f..27fa9c8a77b0 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -45,7 +45,7 @@ #define DRIVER_AUTHOR "Wolfgang Grandegger " #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" -static int debug; +static bool debug; /* * Function prototypes diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 19d112f51b97..4554ee49e635 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -71,7 +71,7 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static int debug; +static bool debug; static struct usb_serial_driver moschip7720_2port_driver; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 55cfd6265b98..03b5e249e95e 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -263,7 +263,7 @@ struct moschip_port { }; -static int debug; +static bool debug; /* * mos7840_set_reg_sync diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 1f00f243c26c..b28f1db0195f 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -21,7 +21,7 @@ #include #include -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 45a8c55881d3..8b8d58a2ac12 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -23,7 +23,7 @@ #include #include -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 691f57a9d712..262ded9e076b 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -32,7 +32,7 @@ * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */ #define DRIVER_DESC "Opticon USB barcode to serial driver (1D)" -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x065a, 0x0009) }, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c96b6b6509fb..420d9857394a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1234,7 +1234,7 @@ static struct usb_serial_driver option_1port_device = { #endif }; -static int debug; +static bool debug; /* per port private data */ diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 2161d1c3c089..e287fd32682c 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -74,7 +74,7 @@ static struct usb_driver oti6858_driver = { .no_dynamic_id = 1, }; -static int debug; +static bool debug; /* requests */ #define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 329295615d06..3d8cda57ce7a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -36,7 +36,7 @@ */ #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" -static int debug; +static bool debug; #define PL2303_CLOSING_WAIT (30*HZ) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index aa9367f5b421..1d5deee3be52 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,7 +22,7 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */ diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index a36e2313eed0..d074b3740dcb 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -81,9 +81,9 @@ #define CONFIG_USB_SERIAL_SAFE_PADDED 0 #endif -static int debug; -static int safe = 1; -static int padded = CONFIG_USB_SERIAL_SAFE_PADDED; +static bool debug; +static bool safe = 1; +static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED; #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold " diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index f2485429172f..fdae0a4407cb 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -46,8 +46,8 @@ allocations > PAGE_SIZE and the number of packets in a page is an integer 512 is the largest possible packet on EHCI */ -static int debug; -static int nmea; +static bool debug; +static bool nmea; /* Used in interface blacklisting */ struct sierra_iface_info { diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 180ea6c7911c..d7f5eee18f00 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -33,7 +33,7 @@ #define DRIVER_VERSION "v0.10" #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" -static int debug; +static bool debug; #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 87362e48796e..7697858d8858 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -46,7 +46,7 @@ #define FULLPWRBIT 0x00000080 #define NEXT_BOARD_POWER_BIT 0x00000004 -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "v0.1" diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index c70cc012d03f..50651cf4fc61 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -20,7 +20,7 @@ #include #include -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05e0, 0x0600) }, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 4af21f46096e..8468eb769a29 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -150,7 +150,7 @@ static int ti_download_firmware(struct ti_device *tdev); /* Data */ /* module parameters */ -static int debug; +static bool debug; static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index ce6c1a65a544..611b206591cb 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -61,7 +61,7 @@ static struct usb_driver usb_serial_driver = { drivers depend on it. */ -static int debug; +static bool debug; /* initially all NULL */ static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index d555ca9567b8..c88657dd31c8 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -37,7 +37,7 @@ #include #include "usb-wwan.h" -static int debug; +static bool debug; void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) { diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 1c11959a7d58..210e4b10dc11 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -52,7 +52,7 @@ static int palm_os_4_probe(struct usb_serial *serial, const struct usb_device_id *id); /* Parameters that may be passed into the module. */ -static int debug; +static bool debug; static __u16 vendor; static __u16 product; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 11af903cb09f..7e0acf5c8e38 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -36,7 +36,7 @@ #include #include "whiteheat.h" /* WhiteHEAT specific commands */ -static int debug; +static bool debug; #ifndef CMSPAR #define CMSPAR 0 diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 44bdce4242ad..622f12b62a47 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -301,9 +301,9 @@ static struct fb_ops atyfb_ops = { .fb_sync = atyfb_sync, }; -static int noaccel; +static bool noaccel; #ifdef CONFIG_MTRR -static int nomtrr; +static bool nomtrr; #endif static int vram; static int pll; diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 150684882ef7..ce1506b75adf 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -263,19 +263,19 @@ static reg_val common_regs[] = { static char *mode_option; static char *monitor_layout; -static int noaccel = 0; +static bool noaccel = 0; static int default_dynclk = -2; -static int nomodeset = 0; -static int ignore_edid = 0; -static int mirror = 0; +static bool nomodeset = 0; +static bool ignore_edid = 0; +static bool mirror = 0; static int panel_yres = 0; -static int force_dfp = 0; -static int force_measure_pll = 0; +static bool force_dfp = 0; +static bool force_measure_pll = 0; #ifdef CONFIG_MTRR -static int nomtrr = 0; +static bool nomtrr = 0; #endif -static int force_sleep; -static int ignore_devlist; +static bool force_sleep; +static bool ignore_devlist; #ifdef CONFIG_PMAC_BACKLIGHT static int backlight = 1; #else diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 6df7c54db0a3..6fb499e7678f 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -350,7 +350,7 @@ struct cirrusfb_info { void (*unmap)(struct fb_info *info); }; -static int noaccel __devinitdata; +static bool noaccel __devinitdata; static char *mode_option __devinitdata = "640x480@60"; /****************************************************************************/ diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c index 4394389caf68..c645f9282650 100644 --- a/drivers/video/hgafb.c +++ b/drivers/video/hgafb.c @@ -133,7 +133,7 @@ static struct fb_fix_screeninfo hga_fix __devinitdata = { /* Don't assume that tty1 will be the initial current console. */ static int release_io_port = 0; static int release_io_ports = 0; -static int nologo = 0; +static bool nologo = 0; /* ------------------------------------------------------------------------- * diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 5ba399991050..c94c91fd8668 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -230,15 +230,15 @@ MODULE_DESCRIPTION("Framebuffer driver for Intel(R) " SUPPORTED_CHIPSETS MODULE_LICENSE("Dual BSD/GPL"); MODULE_DEVICE_TABLE(pci, intelfb_pci_table); -static int accel = 1; +static bool accel = 1; static int vram = 4; -static int hwcursor = 0; -static int mtrr = 1; -static int fixed = 0; -static int noinit = 0; -static int noregister = 0; -static int probeonly = 0; -static int idonly = 0; +static bool hwcursor = 0; +static bool mtrr = 1; +static bool fixed = 0; +static bool noinit = 0; +static bool noregister = 0; +static bool probeonly = 0; +static bool idonly = 0; static int bailearly = 0; static int voffset = 48; static char *mode = NULL; diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c index ea7a8ccc830c..080c35b34bbb 100644 --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c @@ -21,7 +21,7 @@ #include #endif -static int nologo; +static bool nologo; module_param(nologo, bool, 0); MODULE_PARM_DESC(nologo, "Disables startup logo"); diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c index feea7b1dc386..fb3f67391105 100644 --- a/drivers/video/neofb.c +++ b/drivers/video/neofb.c @@ -84,11 +84,11 @@ /* --------------------------------------------------------------------- */ -static int internal; -static int external; -static int libretto; -static int nostretch; -static int nopciburst; +static bool internal; +static bool external; +static bool libretto; +static bool nostretch; +static bool nopciburst; static char *mode_option __devinitdata = NULL; #ifdef MODULE diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 25d8e5103193..b291bfaac80e 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -47,9 +47,9 @@ static unsigned int def_rotate; static unsigned int def_mirror; #ifdef CONFIG_FB_OMAP_MANUAL_UPDATE -static int manual_update = 1; +static bool manual_update = 1; #else -static int manual_update; +static bool manual_update; #endif static struct platform_device *fbdev_pdev; diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index 86ec12e16c7c..da7b18576549 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -50,7 +50,7 @@ module_param_named(def_disp, def_disp_name, charp, 0); MODULE_PARM_DESC(def_disp, "default display name"); #ifdef DEBUG -unsigned int dss_debug; +bool dss_debug; module_param_named(debug, dss_debug, bool, 0644); #endif diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 5abf8e7e7456..46f37883e499 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -340,8 +340,8 @@ struct dsi_packet_sent_handler_data { static struct platform_device *dsi_pdev_map[MAX_NUM_DSI]; #ifdef DEBUG -static unsigned int dsi_perf; -module_param_named(dsi_perf, dsi_perf, bool, 0644); +static bool dsi_perf; +module_param(dsi_perf, bool, 0644); #endif static inline struct dsi_data *dsi_get_dsidrv_data(struct platform_device *dsidev) diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 6308fc59fc9e..57a52eecee91 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -28,7 +28,7 @@ #endif #ifdef DEBUG -extern unsigned int dss_debug; +extern bool dss_debug; #ifdef DSS_SUBSYS_NAME #define DSSDBG(format, ...) \ if (dss_debug) \ diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 70aa47de7146..68ba1f800082 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -43,18 +43,18 @@ static char *def_mode; static char *def_vram; -static int def_vrfb; +static bool def_vrfb; static int def_rotate; -static int def_mirror; +static bool def_mirror; static bool auto_update; static unsigned int auto_update_freq; module_param(auto_update, bool, 0); module_param(auto_update_freq, uint, 0644); #ifdef DEBUG -unsigned int omapfb_debug; +bool omapfb_debug; module_param_named(debug, omapfb_debug, bool, 0644); -static unsigned int omapfb_test_pattern; +static bool omapfb_test_pattern; module_param_named(test, omapfb_test_pattern, bool, 0644); #endif diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h index fdf0edeccf4e..e12d384ea520 100644 --- a/drivers/video/omap2/omapfb/omapfb.h +++ b/drivers/video/omap2/omapfb/omapfb.h @@ -32,7 +32,7 @@ #include