From ae460c115b7aa50c9a36cf78fced07b27962c9d0 Mon Sep 17 00:00:00 2001 From: Jonas Danielsson Date: Fri, 19 Oct 2018 16:40:05 +0200 Subject: mmc: atmel-mci: do not assume idle after atmci_request_end On our AT91SAM9260 board we use the same sdio bus for wifi and for the sd card slot. This caused the atmel-mci to give the following splat on the serial console: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 538 at drivers/mmc/host/atmel-mci.c:859 atmci_send_command+0x24/0x44 Modules linked in: CPU: 0 PID: 538 Comm: mmcqd/0 Not tainted 4.14.76 #14 Hardware name: Atmel AT91SAM9 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (__warn+0xd8/0xf4) [] (__warn) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null) from [] (atmci_send_command+0x24/0x44) [] (atmci_send_command) from [] (atmci_start_request+0x1f4/0x2dc) [] (atmci_start_request) from [] (atmci_request+0xf0/0x164) [] (atmci_request) from [] (mmc_start_request+0x280/0x2d0) [] (mmc_start_request) from [] (mmc_start_areq+0x230/0x330) [] (mmc_start_areq) from [] (mmc_blk_issue_rw_rq+0xc4/0x310) [] (mmc_blk_issue_rw_rq) from [] (mmc_blk_issue_rq+0x118/0x5ac) [] (mmc_blk_issue_rq) from [] (mmc_queue_thread+0xc4/0x118) [] (mmc_queue_thread) from [] (kthread+0x100/0x118) [] (kthread) from [] (ret_from_fork+0x14/0x34) ---[ end trace 594371ddfa284bd6 ]--- This is: WARN_ON(host->cmd); This was fixed on our board by letting atmci_request_end determine what state we are in. Instead of unconditionally setting it to STATE_IDLE on STATE_END_REQUEST. Signed-off-by: Jonas Danielsson Signed-off-by: Ulf Hansson --- drivers/mmc/host/atmel-mci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/mmc/host/atmel-mci.c') diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index be53044086c7..fbc56ee99682 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1954,13 +1954,14 @@ static void atmci_tasklet_func(unsigned long priv) } atmci_request_end(host, host->mrq); - state = STATE_IDLE; + goto unlock; /* atmci_request_end() sets host->state */ break; } } while (state != prev_state); host->state = state; +unlock: spin_unlock(&host->lock); } -- cgit v1.2.3