From 6a4679f312357ac7c74c0e1b996efdd1d0a612fa Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 24 Aug 2016 11:34:37 +0200 Subject: mmc: host: sh_mobile_sdhi: move card_busy from tmio to sdhi card_busy is only used/tested on SDHI for R-Car Gen2 and later. Move it to the SDHI driver, so we can then activate it conditionally depending on the SDHI type. Signed-off-by: Wolfram Sang Tested-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson --- drivers/mmc/host/sh_mobile_sdhi.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/mmc/host/sh_mobile_sdhi.c') diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index c3b651bf89cb..c4e63b7790d7 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -213,6 +213,13 @@ static void sh_mobile_sdhi_clk_disable(struct tmio_mmc_host *host) clk_disable_unprepare(priv->clk); } +static int sh_mobile_sdhi_card_busy(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & TMIO_STAT_DAT0); +} + static int sh_mobile_sdhi_start_signal_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios) { @@ -369,6 +376,7 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev) host->clk_update = sh_mobile_sdhi_clk_update; host->clk_disable = sh_mobile_sdhi_clk_disable; host->multi_io_quirk = sh_mobile_sdhi_multi_io_quirk; + host->card_busy = sh_mobile_sdhi_card_busy; host->start_signal_voltage_switch = sh_mobile_sdhi_start_signal_voltage_switch; /* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */ -- cgit v1.2.3