From 64eb036af42d3816364c4db49d93be3a4614389c Mon Sep 17 00:00:00 2001 From: Bridge Wu Date: Thu, 13 Dec 2007 07:24:30 +0100 Subject: [ARM] 4709/1: pxa: mmc: add 26MHz support for pxa3[0|1]0 mmc controller pxa3[0|1]0 mmc controller can support 26MHz clock mode, they support SD spec 1.1 and MMC spec 4.0 which specify high speed mode. So host caps will include MMC_CAP_MMC_HIGHSPEED and MMC_CAP_SD_HIGHSPEED for pxa3[0|1]0. This patch is to add 26MHz support for them. pxa host clock will be set to 26MHz mode when the card supported max clock rate is higher than or equal to 26MHz. Signed-off-by: Bridge Wu Acked-by: Pierre Ossman Signed-off-by: Russell King --- drivers/mmc/host/pxamci.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'drivers/mmc/host') diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 1654a3330340..80df4b047c81 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -375,14 +375,23 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->clkrt == CLKRT_OFF) clk_enable(host->clk); - /* - * clk might result in a lower divisor than we - * desire. check for that condition and adjust - * as appropriate. - */ - if (rate / clk > ios->clock) - clk <<= 1; - host->clkrt = fls(clk) - 1; + if (ios->clock == 26000000) { + /* to support 26MHz on pxa300/pxa310 */ + host->clkrt = 7; + } else { + /* to handle (19.5MHz, 26MHz) */ + if (!clk) + clk = 1; + + /* + * clk might result in a lower divisor than we + * desire. check for that condition and adjust + * as appropriate. + */ + if (rate / clk > ios->clock) + clk <<= 1; + host->clkrt = fls(clk) - 1; + } /* * we write clkrt on the next command @@ -519,7 +528,8 @@ static int pxamci_probe(struct platform_device *pdev) * Calculate minimum clock rate, rounding up. */ mmc->f_min = (host->clkrate + 63) / 64; - mmc->f_max = host->clkrate; + mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000 + : host->clkrate; mmc->ocr_avail = host->pdata ? host->pdata->ocr_mask : @@ -529,6 +539,9 @@ static int pxamci_probe(struct platform_device *pdev) if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) { mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; host->cmdat |= CMDAT_SDIO_INT_EN; + if (cpu_is_pxa300() || cpu_is_pxa310()) + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED; } host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL); -- cgit v1.2.3