From e2bf08d643a244ccb9d9b70aff655340a0d98626 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 22 Sep 2009 16:45:03 -0700 Subject: omap_hsmmc: set a large data timeout for commands with busy signal Commands like SWITCH (CMD6) send a response and then signal busy while the operation is completed. These commands are expected to always succeed (otherwise the response would have indicated an error). Set an arbitrarily large data timeout value (100ms) for these commands to ensure that premature timeouts do not occur. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/omap_hsmmc.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers/mmc/host') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 14c58caac990..a4dd43f117f0 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -997,7 +997,8 @@ static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host, } static void set_data_timeout(struct omap_hsmmc_host *host, - struct mmc_request *req) + unsigned int timeout_ns, + unsigned int timeout_clks) { unsigned int timeout, cycle_ns; uint32_t reg, clkd, dto = 0; @@ -1008,8 +1009,8 @@ static void set_data_timeout(struct omap_hsmmc_host *host, clkd = 1; cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); - timeout = req->data->timeout_ns / cycle_ns; - timeout += req->data->timeout_clks; + timeout = timeout_ns / cycle_ns; + timeout += timeout_clks; if (timeout) { while ((timeout & 0x80000000) == 0) { dto += 1; @@ -1043,12 +1044,18 @@ omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req) if (req->data == NULL) { OMAP_HSMMC_WRITE(host->base, BLK, 0); + /* + * Set an arbitrary 100ms data timeout for commands with + * busy signal. + */ + if (req->cmd->flags & MMC_RSP_BUSY) + set_data_timeout(host, 100000000U, 0); return 0; } OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) | (req->data->blocks << 16)); - set_data_timeout(host, req); + set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks); if (host->use_dma) { ret = omap_hsmmc_start_dma_transfer(host, req); -- cgit v1.2.3