From dba3c29ea4a1d5d544f59b94fd8a41662135e071 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 9 Apr 2012 12:08:32 +0530 Subject: mmc: omap_hsmmc: Enable Auto CMD12 Enable Auto-CMD12 for multi block read/write on HSMMC. Tested on OMAP4430, OMAP3430 and OMAP2430 SDP Signed-off-by: Balaji T K Signed-off-by: Venkatraman S Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 56d4499d4388..dfa6f87b6cc2 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -85,6 +85,7 @@ #define BRR_ENABLE (1 << 5) #define DTO_ENABLE (1 << 20) #define INIT_STREAM (1 << 1) +#define ACEN_ACMD12 (1 << 2) #define DP_SELECT (1 << 21) #define DDIR (1 << 4) #define DMA_EN 0x1 @@ -115,6 +116,7 @@ #define OMAP_MMC_MAX_CLOCK 52000000 #define DRIVER_NAME "omap_hsmmc" +#define AUTO_CMD12 (1 << 0) /* Auto CMD12 support */ /* * One controller can have multiple slots, like on some omap boards using * omap.c controller driver. Luckily this is not currently done on any known @@ -175,6 +177,7 @@ struct omap_hsmmc_host { int reqs_blocked; int use_reg; int req_in_progress; + unsigned int flags; struct omap_hsmmc_next next_data; struct omap_mmc_platform_data *pdata; @@ -766,6 +769,8 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, cmdtype = 0x3; cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); + if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode)) + cmdreg |= ACEN_ACMD12; if (data) { cmdreg |= DP_SELECT | MSBS | BCE; @@ -837,11 +842,14 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data) else data->bytes_xfered = 0; - if (!data->stop) { + if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) { + omap_hsmmc_start_command(host, data->stop, NULL); + } else { + if (data->stop) + data->stop->resp[0] = OMAP_HSMMC_READ(host->base, + RSP76); omap_hsmmc_request_done(host, data->mrq); - return; } - omap_hsmmc_start_command(host, data->stop, NULL); } /* @@ -1844,6 +1852,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) host->mapbase = res->start + pdata->reg_offset; host->base = ioremap(host->mapbase, SZ_4K); host->power_mode = MMC_POWER_OFF; + host->flags = AUTO_CMD12; host->next_data.cookie = 1; platform_set_drvdata(pdev, host); -- cgit v1.2.3 From 03b5d924b926dd994b16f30f7a13bfb71ee0f478 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 9 Apr 2012 12:08:33 +0530 Subject: mmc: omap_hsmmc: add DDR support Add Dual data rate support for omap_hsmmc. Signed-off-by: Balaji T K Signed-off-by: Venkatraman S Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index dfa6f87b6cc2..dc41b9e4299e 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -92,6 +92,7 @@ #define MSBS (1 << 5) #define BCE (1 << 1) #define FOUR_BIT (1 << 1) +#define DDR (1 << 19) #define DW8 (1 << 5) #define CC 0x1 #define TC 0x02 @@ -523,6 +524,10 @@ static void omap_hsmmc_set_bus_width(struct omap_hsmmc_host *host) u32 con; con = OMAP_HSMMC_READ(host->base, CON); + if (ios->timing == MMC_TIMING_UHS_DDR50) + con |= DDR; /* configure in DDR mode */ + else + con &= ~DDR; switch (ios->bus_width) { case MMC_BUS_WIDTH_8: OMAP_HSMMC_WRITE(host->base, CON, con | DW8); -- cgit v1.2.3 From 31463b141587001781d86b2ef360544f101bd998 Mon Sep 17 00:00:00 2001 From: Venkatraman S Date: Mon, 9 Apr 2012 12:08:34 +0530 Subject: mmc: omap_hsmmc: use spinlock IRQ safe variant Prevent possible races between HSMMC/DMA IRQs and next requests. Signed-off-by: Venkatraman S Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index dc41b9e4299e..a5bca725e414 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -806,11 +806,12 @@ omap_hsmmc_get_dma_dir(struct omap_hsmmc_host *host, struct mmc_data *data) static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq) { int dma_ch; + unsigned long flags; - spin_lock(&host->irq_lock); + spin_lock_irqsave(&host->irq_lock, flags); host->req_in_progress = 0; dma_ch = host->dma_ch; - spin_unlock(&host->irq_lock); + spin_unlock_irqrestore(&host->irq_lock, flags); omap_hsmmc_disable_irq(host); /* Do not complete the request if DMA is still in progress */ @@ -887,13 +888,14 @@ omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd) static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) { int dma_ch; + unsigned long flags; host->data->error = errno; - spin_lock(&host->irq_lock); + spin_lock_irqsave(&host->irq_lock, flags); dma_ch = host->dma_ch; host->dma_ch = -1; - spin_unlock(&host->irq_lock); + spin_unlock_irqrestore(&host->irq_lock, flags); if (host->use_dma && dma_ch != -1) { dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, @@ -1247,6 +1249,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) struct omap_hsmmc_host *host = cb_data; struct mmc_data *data; int dma_ch, req_in_progress; + unsigned long flags; if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) { dev_warn(mmc_dev(host->mmc), "unexpected dma status %x\n", @@ -1254,9 +1257,9 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) return; } - spin_lock(&host->irq_lock); + spin_lock_irqsave(&host->irq_lock, flags); if (host->dma_ch < 0) { - spin_unlock(&host->irq_lock); + spin_unlock_irqrestore(&host->irq_lock, flags); return; } @@ -1266,7 +1269,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) /* Fire up the next transfer. */ omap_hsmmc_config_dma_params(host, data, data->sg + host->dma_sg_idx); - spin_unlock(&host->irq_lock); + spin_unlock_irqrestore(&host->irq_lock, flags); return; } @@ -1277,7 +1280,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) req_in_progress = host->req_in_progress; dma_ch = host->dma_ch; host->dma_ch = -1; - spin_unlock(&host->irq_lock); + spin_unlock_irqrestore(&host->irq_lock, flags); omap_free_dma(dma_ch); -- cgit v1.2.3 From cd03d9a85802c0023e522c21a1dabaf3e5785010 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 9 Apr 2012 12:08:35 +0530 Subject: mmc: omap_hsmmc: Cleanup use of cpu_is_* for debounce_clock There really does not seem to be a need to use cpu_is_* check for getting the debounce clock as clkdev is perfectly capable of handling situations when certain clocks are only available on select platforms. Also get rid of the 'got_dbclk' flag and instead use the dbclk clock pointer to know if a valid debounce clock exists for the platform. Signed-off-by: Rajendra Nayak Signed-off-by: Venkatraman S Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 39 +++++++++++++++++---------------------- 1 file changed, 17 insertions(+), 22 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index a5bca725e414..4254b6f310aa 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -170,7 +170,6 @@ struct omap_hsmmc_host { int use_dma, dma_ch; int dma_line_tx, dma_line_rx; int slot_id; - int got_dbclk; int response_busy; int context_loss; int vdd; @@ -1097,7 +1096,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd) /* Disable the clocks */ pm_runtime_put_sync(host->dev); - if (host->got_dbclk) + if (host->dbclk) clk_disable(host->dbclk); /* Turn the power off */ @@ -1108,7 +1107,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd) ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); pm_runtime_get_sync(host->dev); - if (host->got_dbclk) + if (host->dbclk) clk_enable(host->dbclk); if (ret != 0) @@ -1902,21 +1901,17 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_context_save(host); - if (cpu_is_omap2430()) { - host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); - /* - * MMC can still work without debounce clock. - */ - if (IS_ERR(host->dbclk)) - dev_warn(mmc_dev(host->mmc), - "Failed to get debounce clock\n"); - else - host->got_dbclk = 1; - - if (host->got_dbclk) - if (clk_enable(host->dbclk) != 0) - dev_dbg(mmc_dev(host->mmc), "Enabling debounce" - " clk failed\n"); + host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); + /* + * MMC can still work without debounce clock. + */ + if (IS_ERR(host->dbclk)) { + dev_warn(mmc_dev(host->mmc), "Failed to get debounce clk\n"); + host->dbclk = NULL; + } else if (clk_enable(host->dbclk) != 0) { + dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n"); + clk_put(host->dbclk); + host->dbclk = NULL; } /* Since we do only SG emulation, we can have as many segs @@ -2036,7 +2031,7 @@ err_irq: pm_runtime_put_sync(host->dev); pm_runtime_disable(host->dev); clk_put(host->fclk); - if (host->got_dbclk) { + if (host->dbclk) { clk_disable(host->dbclk); clk_put(host->dbclk); } @@ -2069,7 +2064,7 @@ static int __devexit omap_hsmmc_remove(struct platform_device *pdev) pm_runtime_put_sync(host->dev); pm_runtime_disable(host->dev); clk_put(host->fclk); - if (host->got_dbclk) { + if (host->dbclk) { clk_disable(host->dbclk); clk_put(host->dbclk); } @@ -2127,7 +2122,7 @@ static int omap_hsmmc_suspend(struct device *dev) OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } - if (host->got_dbclk) + if (host->dbclk) clk_disable(host->dbclk); err: pm_runtime_put_sync(host->dev); @@ -2148,7 +2143,7 @@ static int omap_hsmmc_resume(struct device *dev) pm_runtime_get_sync(host->dev); - if (host->got_dbclk) + if (host->dbclk) clk_enable(host->dbclk); if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) -- cgit v1.2.3 From 7f8bea7f75618165d015f083c77f1db3e4584f88 Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Thu, 5 Apr 2012 10:05:08 +0200 Subject: mmc: davinci_mmc: set MODULE_ALIAS to allow autoloading Davinci MMC platform devices (as in mach-davinci/devices-da8xx.c) use "davinci_mmc" as their name. To allow autoloading of the relevant driver, the module needs to set the MODULE_ALIAS. Signed-off-by: Jan Luebbe Signed-off-by: Chris Ball --- drivers/mmc/host/davinci_mmc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index c1f3673ae1ef..7cf6c624bf73 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -1533,4 +1533,5 @@ module_exit(davinci_mmcsd_exit); MODULE_AUTHOR("Texas Instruments India"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("MMC/SD driver for Davinci MMC controller"); +MODULE_ALIAS("platform:davinci_mmc"); -- cgit v1.2.3 From 021459773d9b93e8d7388086db7b17107bdfc51d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 10 Apr 2012 11:36:03 +0100 Subject: mmc: sdhci: Log what timeout was set if the timeout is too large Rather than just logging that we came up with an excessively large timeout say what the timeout was, this may provide some clues as to what the issue is. Signed-off-by: Mark Brown Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index ccefdebeff14..e626732aff77 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -680,8 +680,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) } if (count >= 0xF) { - pr_warning("%s: Too large timeout requested for CMD%d!\n", - mmc_hostname(host->mmc), cmd->opcode); + pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n", + mmc_hostname(host->mmc), count, cmd->opcode); count = 0xE; } -- cgit v1.2.3 From 6187fee46f4bc7f18f2caefdc75a073c6a25adab Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 11 Apr 2012 22:24:49 +0200 Subject: mmc: remove imxmmc driver This driver is broken since 2.6.31 when the traditional i.MX1 support was removed. In theory the i.MX1 mmc controller can be supported by the mxcmmc driver which basically is the same hardware. However, the i.MX1 controller has severe bugs which made several workarounds necessary which resulted in a different driver structure. At that time it seemed easier to write a second driver to support hardware without bugs. As noone cared for the i.MX1 driver for a long time and it does not compile, remove it. Signed-off-by: Sascha Hauer Signed-off-by: Chris Ball --- drivers/mmc/host/Kconfig | 10 - drivers/mmc/host/Makefile | 1 - drivers/mmc/host/imxmmc.c | 1169 --------------------------------------------- drivers/mmc/host/imxmmc.h | 64 --- 4 files changed, 1244 deletions(-) delete mode 100644 drivers/mmc/host/imxmmc.c delete mode 100644 drivers/mmc/host/imxmmc.h (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 2bc06e7344db..9f1f5e2bbfef 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -307,16 +307,6 @@ config MMC_ATMELMCI_DMA If unsure, say N. -config MMC_IMX - tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_MX1 - help - This selects the Motorola i.MX Multimedia card Interface. - If you have a i.MX platform with a Multimedia Card slot, - say Y or M here. - - If unsure, say N. - config MMC_MSM tristate "Qualcomm SDCC Controller Support" depends on MMC && ARCH_MSM diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 3e7e26d08073..8922b06be925 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -4,7 +4,6 @@ obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_PXA) += pxamci.o -obj-$(CONFIG_MMC_IMX) += imxmmc.o obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_MXS) += mxs-mmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c deleted file mode 100644 index ea0f3cedef21..000000000000 --- a/drivers/mmc/host/imxmmc.c +++ /dev/null @@ -1,1169 +0,0 @@ -/* - * linux/drivers/mmc/host/imxmmc.c - Motorola i.MX MMCI driver - * - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * Copyright (C) 2006 Pavel Pisa, PiKRON - * - * derived from pxamci.c by Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "imxmmc.h" - -#define DRIVER_NAME "imx-mmc" - -#define IMXMCI_INT_MASK_DEFAULT (INT_MASK_BUF_READY | INT_MASK_DATA_TRAN | \ - INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \ - INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO) - -struct imxmci_host { - struct mmc_host *mmc; - spinlock_t lock; - struct resource *res; - void __iomem *base; - int irq; - imx_dmach_t dma; - volatile unsigned int imask; - unsigned int power_mode; - unsigned int present; - struct imxmmc_platform_data *pdata; - - struct mmc_request *req; - struct mmc_command *cmd; - struct mmc_data *data; - - struct timer_list timer; - struct tasklet_struct tasklet; - unsigned int status_reg; - unsigned long pending_events; - /* Next two fields are there for CPU driven transfers to overcome SDHC deficiencies */ - u16 *data_ptr; - unsigned int data_cnt; - atomic_t stuck_timeout; - - unsigned int dma_nents; - unsigned int dma_size; - unsigned int dma_dir; - int dma_allocated; - - unsigned char actual_bus_width; - - int prev_cmd_code; - - struct clk *clk; -}; - -#define IMXMCI_PEND_IRQ_b 0 -#define IMXMCI_PEND_DMA_END_b 1 -#define IMXMCI_PEND_DMA_ERR_b 2 -#define IMXMCI_PEND_WAIT_RESP_b 3 -#define IMXMCI_PEND_DMA_DATA_b 4 -#define IMXMCI_PEND_CPU_DATA_b 5 -#define IMXMCI_PEND_CARD_XCHG_b 6 -#define IMXMCI_PEND_SET_INIT_b 7 -#define IMXMCI_PEND_STARTED_b 8 - -#define IMXMCI_PEND_IRQ_m (1 << IMXMCI_PEND_IRQ_b) -#define IMXMCI_PEND_DMA_END_m (1 << IMXMCI_PEND_DMA_END_b) -#define IMXMCI_PEND_DMA_ERR_m (1 << IMXMCI_PEND_DMA_ERR_b) -#define IMXMCI_PEND_WAIT_RESP_m (1 << IMXMCI_PEND_WAIT_RESP_b) -#define IMXMCI_PEND_DMA_DATA_m (1 << IMXMCI_PEND_DMA_DATA_b) -#define IMXMCI_PEND_CPU_DATA_m (1 << IMXMCI_PEND_CPU_DATA_b) -#define IMXMCI_PEND_CARD_XCHG_m (1 << IMXMCI_PEND_CARD_XCHG_b) -#define IMXMCI_PEND_SET_INIT_m (1 << IMXMCI_PEND_SET_INIT_b) -#define IMXMCI_PEND_STARTED_m (1 << IMXMCI_PEND_STARTED_b) - -static void imxmci_stop_clock(struct imxmci_host *host) -{ - int i = 0; - u16 reg; - - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg & ~STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); - while (i < 0x1000) { - if (!(i & 0x7f)) { - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg | STR_STP_CLK_STOP_CLK, - host->base + MMC_REG_STR_STP_CLK); - } - - reg = readw(host->base + MMC_REG_STATUS); - if (!(reg & STATUS_CARD_BUS_CLK_RUN)) { - /* Check twice before cut */ - reg = readw(host->base + MMC_REG_STATUS); - if (!(reg & STATUS_CARD_BUS_CLK_RUN)) - return; - } - - i++; - } - dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n"); -} - -static int imxmci_start_clock(struct imxmci_host *host) -{ - unsigned int trials = 0; - unsigned int delay_limit = 128; - unsigned long flags; - u16 reg; - - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg & ~STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK); - - clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); - - /* - * Command start of the clock, this usually succeeds in less - * then 6 delay loops, but during card detection (low clockrate) - * it takes up to 5000 delay loops and sometimes fails for the first time - */ - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg | STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); - - do { - unsigned int delay = delay_limit; - - while (delay--) { - reg = readw(host->base + MMC_REG_STATUS); - if (reg & STATUS_CARD_BUS_CLK_RUN) { - /* Check twice before cut */ - reg = readw(host->base + MMC_REG_STATUS); - if (reg & STATUS_CARD_BUS_CLK_RUN) - return 0; - } - - if (test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) - return 0; - } - - local_irq_save(flags); - /* - * Ensure, that request is not doubled under all possible circumstances. - * It is possible, that cock running state is missed, because some other - * IRQ or schedule delays this function execution and the clocks has - * been already stopped by other means (response processing, SDHC HW) - */ - if (!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) { - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg | STR_STP_CLK_START_CLK, - host->base + MMC_REG_STR_STP_CLK); - } - local_irq_restore(flags); - - } while (++trials < 256); - - dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n"); - - return -1; -} - -static void imxmci_softreset(struct imxmci_host *host) -{ - int i; - - /* reset sequence */ - writew(0x08, host->base + MMC_REG_STR_STP_CLK); - writew(0x0D, host->base + MMC_REG_STR_STP_CLK); - - for (i = 0; i < 8; i++) - writew(0x05, host->base + MMC_REG_STR_STP_CLK); - - writew(0xff, host->base + MMC_REG_RES_TO); - writew(512, host->base + MMC_REG_BLK_LEN); - writew(1, host->base + MMC_REG_NOB); -} - -static int imxmci_busy_wait_for_status(struct imxmci_host *host, - unsigned int *pstat, unsigned int stat_mask, - int timeout, const char *where) -{ - int loops = 0; - - while (!(*pstat & stat_mask)) { - loops += 2; - if (loops >= timeout) { - dev_dbg(mmc_dev(host->mmc), "busy wait timeout in %s, STATUS = 0x%x (0x%x)\n", - where, *pstat, stat_mask); - return -1; - } - udelay(2); - *pstat |= readw(host->base + MMC_REG_STATUS); - } - if (!loops) - return 0; - - /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */ - if (!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock >= 8000000)) - dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", - loops, where, *pstat, stat_mask); - return loops; -} - -static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) -{ - unsigned int nob = data->blocks; - unsigned int blksz = data->blksz; - unsigned int datasz = nob * blksz; - int i; - - if (data->flags & MMC_DATA_STREAM) - nob = 0xffff; - - host->data = data; - data->bytes_xfered = 0; - - writew(nob, host->base + MMC_REG_NOB); - writew(blksz, host->base + MMC_REG_BLK_LEN); - - /* - * DMA cannot be used for small block sizes, we have to use CPU driven transfers otherwise. - * We are in big troubles for non-512 byte transfers according to note in the paragraph - * 20.6.7 of User Manual anyway, but we need to be able to transfer SCR at least. - * The situation is even more complex in reality. The SDHC in not able to handle wll - * partial FIFO fills and reads. The length has to be rounded up to burst size multiple. - * This is required for SCR read at least. - */ - if (datasz < 512) { - host->dma_size = datasz; - if (data->flags & MMC_DATA_READ) { - host->dma_dir = DMA_FROM_DEVICE; - - /* Hack to enable read SCR */ - writew(1, host->base + MMC_REG_NOB); - writew(512, host->base + MMC_REG_BLK_LEN); - } else { - host->dma_dir = DMA_TO_DEVICE; - } - - /* Convert back to virtual address */ - host->data_ptr = (u16 *)sg_virt(data->sg); - host->data_cnt = 0; - - clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); - set_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); - - return; - } - - if (data->flags & MMC_DATA_READ) { - host->dma_dir = DMA_FROM_DEVICE; - host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, host->dma_dir); - - imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_READ); - - /*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_READ, IMX_DMA_WIDTH_16, CCR_REN);*/ - CCR(host->dma) = CCR_DMOD_LINEAR | CCR_DSIZ_32 | CCR_SMOD_FIFO | CCR_SSIZ_16 | CCR_REN; - } else { - host->dma_dir = DMA_TO_DEVICE; - - host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, host->dma_dir); - - imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_WRITE); - - /*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_WRITE, IMX_DMA_WIDTH_16, CCR_REN);*/ - CCR(host->dma) = CCR_SMOD_LINEAR | CCR_SSIZ_32 | CCR_DMOD_FIFO | CCR_DSIZ_16 | CCR_REN; - } - -#if 1 /* This code is there only for consistency checking and can be disabled in future */ - host->dma_size = 0; - for (i = 0; i < host->dma_nents; i++) - host->dma_size += data->sg[i].length; - - if (datasz > host->dma_size) { - dev_err(mmc_dev(host->mmc), "imxmci_setup_data datasz 0x%x > 0x%x dm_size\n", - datasz, host->dma_size); - } -#endif - - host->dma_size = datasz; - - wmb(); - - set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); - clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); - - /* start DMA engine for read, write is delayed after initial response */ - if (host->dma_dir == DMA_FROM_DEVICE) - imx_dma_enable(host->dma); -} - -static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, unsigned int cmdat) -{ - unsigned long flags; - u32 imask; - - WARN_ON(host->cmd != NULL); - host->cmd = cmd; - - /* Ensure, that clock are stopped else command programming and start fails */ - imxmci_stop_clock(host); - - if (cmd->flags & MMC_RSP_BUSY) - cmdat |= CMD_DAT_CONT_BUSY; - - switch (mmc_resp_type(cmd)) { - case MMC_RSP_R1: /* short CRC, OPCODE */ - case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */ - cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R1; - break; - case MMC_RSP_R2: /* long 136 bit + CRC */ - cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R2; - break; - case MMC_RSP_R3: /* short */ - cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3; - break; - default: - break; - } - - if (test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events)) - cmdat |= CMD_DAT_CONT_INIT; /* This command needs init */ - - if (host->actual_bus_width == MMC_BUS_WIDTH_4) - cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; - - writew(cmd->opcode, host->base + MMC_REG_CMD); - writew(cmd->arg >> 16, host->base + MMC_REG_ARGH); - writew(cmd->arg & 0xffff, host->base + MMC_REG_ARGL); - writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT); - - atomic_set(&host->stuck_timeout, 0); - set_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events); - - - imask = IMXMCI_INT_MASK_DEFAULT; - imask &= ~INT_MASK_END_CMD_RES; - if (cmdat & CMD_DAT_CONT_DATA_ENABLE) { - /* imask &= ~INT_MASK_BUF_READY; */ - imask &= ~INT_MASK_DATA_TRAN; - if (cmdat & CMD_DAT_CONT_WRITE) - imask &= ~INT_MASK_WRITE_OP_DONE; - if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) - imask &= ~INT_MASK_BUF_READY; - } - - spin_lock_irqsave(&host->lock, flags); - host->imask = imask; - writew(host->imask, host->base + MMC_REG_INT_MASK); - spin_unlock_irqrestore(&host->lock, flags); - - dev_dbg(mmc_dev(host->mmc), "CMD%02d (0x%02x) mask set to 0x%04x\n", - cmd->opcode, cmd->opcode, imask); - - imxmci_start_clock(host); -} - -static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *req) -{ - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); - - host->pending_events &= ~(IMXMCI_PEND_WAIT_RESP_m | IMXMCI_PEND_DMA_END_m | - IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m); - - host->imask = IMXMCI_INT_MASK_DEFAULT; - writew(host->imask, host->base + MMC_REG_INT_MASK); - - spin_unlock_irqrestore(&host->lock, flags); - - if (req && req->cmd) - host->prev_cmd_code = req->cmd->opcode; - - host->req = NULL; - host->cmd = NULL; - host->data = NULL; - mmc_request_done(host->mmc, req); -} - -static int imxmci_finish_data(struct imxmci_host *host, unsigned int stat) -{ - struct mmc_data *data = host->data; - int data_error; - - if (test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { - imx_dma_disable(host->dma); - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents, - host->dma_dir); - } - - if (stat & STATUS_ERR_MASK) { - dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", stat); - if (stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR)) - data->error = -EILSEQ; - else if (stat & STATUS_TIME_OUT_READ) - data->error = -ETIMEDOUT; - else - data->error = -EIO; - } else { - data->bytes_xfered = host->dma_size; - } - - data_error = data->error; - - host->data = NULL; - - return data_error; -} - -static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat) -{ - struct mmc_command *cmd = host->cmd; - int i; - u32 a, b, c; - struct mmc_data *data = host->data; - - if (!cmd) - return 0; - - host->cmd = NULL; - - if (stat & STATUS_TIME_OUT_RESP) { - dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n"); - cmd->error = -ETIMEDOUT; - } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) { - dev_dbg(mmc_dev(host->mmc), "cmd crc error\n"); - cmd->error = -EILSEQ; - } - - if (cmd->flags & MMC_RSP_PRESENT) { - if (cmd->flags & MMC_RSP_136) { - for (i = 0; i < 4; i++) { - a = readw(host->base + MMC_REG_RES_FIFO); - b = readw(host->base + MMC_REG_RES_FIFO); - cmd->resp[i] = a << 16 | b; - } - } else { - a = readw(host->base + MMC_REG_RES_FIFO); - b = readw(host->base + MMC_REG_RES_FIFO); - c = readw(host->base + MMC_REG_RES_FIFO); - cmd->resp[0] = a << 24 | b << 8 | c >> 8; - } - } - - dev_dbg(mmc_dev(host->mmc), "RESP 0x%08x, 0x%08x, 0x%08x, 0x%08x, error %d\n", - cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error); - - if (data && !cmd->error && !(stat & STATUS_ERR_MASK)) { - if (host->req->data->flags & MMC_DATA_WRITE) { - - /* Wait for FIFO to be empty before starting DMA write */ - - stat = readw(host->base + MMC_REG_STATUS); - if (imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FE, - 40, "imxmci_cmd_done DMA WR") < 0) { - cmd->error = -EIO; - imxmci_finish_data(host, stat); - if (host->req) - imxmci_finish_request(host, host->req); - dev_warn(mmc_dev(host->mmc), "STATUS = 0x%04x\n", - stat); - return 0; - } - - if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) - imx_dma_enable(host->dma); - } - } else { - struct mmc_request *req; - imxmci_stop_clock(host); - req = host->req; - - if (data) - imxmci_finish_data(host, stat); - - if (req) - imxmci_finish_request(host, req); - else - dev_warn(mmc_dev(host->mmc), "imxmci_cmd_done: no request to finish\n"); - } - - return 1; -} - -static int imxmci_data_done(struct imxmci_host *host, unsigned int stat) -{ - struct mmc_data *data = host->data; - int data_error; - - if (!data) - return 0; - - data_error = imxmci_finish_data(host, stat); - - if (host->req->stop) { - imxmci_stop_clock(host); - imxmci_start_cmd(host, host->req->stop, 0); - } else { - struct mmc_request *req; - req = host->req; - if (req) - imxmci_finish_request(host, req); - else - dev_warn(mmc_dev(host->mmc), "imxmci_data_done: no request to finish\n"); - } - - return 1; -} - -static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) -{ - int i; - int burst_len; - int trans_done = 0; - unsigned int stat = *pstat; - - if (host->actual_bus_width != MMC_BUS_WIDTH_4) - burst_len = 16; - else - burst_len = 64; - - /* This is unfortunately required */ - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n", - stat); - - udelay(20); /* required for clocks < 8MHz*/ - - if (host->dma_dir == DMA_FROM_DEVICE) { - imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE | - STATUS_TIME_OUT_READ, - 50, "imxmci_cpu_driven_data read"); - - while ((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) && - !(stat & STATUS_TIME_OUT_READ) && - (host->data_cnt < 512)) { - - udelay(20); /* required for clocks < 8MHz*/ - - for (i = burst_len; i >= 2 ; i -= 2) { - u16 data; - data = readw(host->base + MMC_REG_BUFFER_ACCESS); - udelay(10); /* required for clocks < 8MHz*/ - if (host->data_cnt+2 <= host->dma_size) { - *(host->data_ptr++) = data; - } else { - if (host->data_cnt < host->dma_size) - *(u8 *)(host->data_ptr) = data; - } - host->data_cnt += 2; - } - - stat = readw(host->base + MMC_REG_STATUS); - - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n", - host->data_cnt, burst_len, stat); - } - - if ((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512)) - trans_done = 1; - - if (host->dma_size & 0x1ff) - stat &= ~STATUS_CRC_READ_ERR; - - if (stat & STATUS_TIME_OUT_READ) { - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read timeout STATUS = 0x%x\n", - stat); - trans_done = -1; - } - - } else { - imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FE, - 20, "imxmci_cpu_driven_data write"); - - while ((stat & STATUS_APPL_BUFF_FE) && - (host->data_cnt < host->dma_size)) { - if (burst_len >= host->dma_size - host->data_cnt) { - burst_len = host->dma_size - host->data_cnt; - host->data_cnt = host->dma_size; - trans_done = 1; - } else { - host->data_cnt += burst_len; - } - - for (i = burst_len; i > 0 ; i -= 2) - writew(*(host->data_ptr++), host->base + MMC_REG_BUFFER_ACCESS); - - stat = readw(host->base + MMC_REG_STATUS); - - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data write burst %d STATUS = 0x%x\n", - burst_len, stat); - } - } - - *pstat = stat; - - return trans_done; -} - -static void imxmci_dma_irq(int dma, void *devid) -{ - struct imxmci_host *host = devid; - u32 stat = readw(host->base + MMC_REG_STATUS); - - atomic_set(&host->stuck_timeout, 0); - host->status_reg = stat; - set_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); - tasklet_schedule(&host->tasklet); -} - -static irqreturn_t imxmci_irq(int irq, void *devid) -{ - struct imxmci_host *host = devid; - u32 stat = readw(host->base + MMC_REG_STATUS); - int handled = 1; - - writew(host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT, - host->base + MMC_REG_INT_MASK); - - atomic_set(&host->stuck_timeout, 0); - host->status_reg = stat; - set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events); - set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); - tasklet_schedule(&host->tasklet); - - return IRQ_RETVAL(handled); -} - -static void imxmci_tasklet_fnc(unsigned long data) -{ - struct imxmci_host *host = (struct imxmci_host *)data; - u32 stat; - unsigned int data_dir_mask = 0; /* STATUS_WR_CRC_ERROR_CODE_MASK */ - int timeout = 0; - - if (atomic_read(&host->stuck_timeout) > 4) { - char *what; - timeout = 1; - stat = readw(host->base + MMC_REG_STATUS); - host->status_reg = stat; - if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) - if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) - what = "RESP+DMA"; - else - what = "RESP"; - else - if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) - if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events)) - what = "DATA"; - else - what = "DMA"; - else - what = "???"; - - dev_err(mmc_dev(host->mmc), - "%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n", - what, stat, - readw(host->base + MMC_REG_INT_MASK)); - dev_err(mmc_dev(host->mmc), - "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n", - readw(host->base + MMC_REG_CMD_DAT_CONT), - readw(host->base + MMC_REG_BLK_LEN), - readw(host->base + MMC_REG_NOB), - CCR(host->dma)); - dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n", - host->cmd ? host->cmd->opcode : 0, - host->prev_cmd_code, - 1 << host->actual_bus_width, host->dma_size); - } - - if (!host->present || timeout) - host->status_reg = STATUS_TIME_OUT_RESP | STATUS_TIME_OUT_READ | - STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR; - - if (test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) { - clear_bit(IMXMCI_PEND_IRQ_b, &host->pending_events); - - stat = readw(host->base + MMC_REG_STATUS); - /* - * This is not required in theory, but there is chance to miss some flag - * which clears automatically by mask write, FreeScale original code keeps - * stat from IRQ time so do I - */ - stat |= host->status_reg; - - if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) - stat &= ~STATUS_CRC_READ_ERR; - - if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { - imxmci_busy_wait_for_status(host, &stat, - STATUS_END_CMD_RESP | STATUS_ERR_MASK, - 20, "imxmci_tasklet_fnc resp (ERRATUM #4)"); - } - - if (stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) { - if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) - imxmci_cmd_done(host, stat); - if (host->data && (stat & STATUS_ERR_MASK)) - imxmci_data_done(host, stat); - } - - if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) { - stat |= readw(host->base + MMC_REG_STATUS); - if (imxmci_cpu_driven_data(host, &stat)) { - if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) - imxmci_cmd_done(host, stat); - atomic_clear_mask(IMXMCI_PEND_IRQ_m|IMXMCI_PEND_CPU_DATA_m, - &host->pending_events); - imxmci_data_done(host, stat); - } - } - } - - if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) && - !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { - - stat = readw(host->base + MMC_REG_STATUS); - /* Same as above */ - stat |= host->status_reg; - - if (host->dma_dir == DMA_TO_DEVICE) - data_dir_mask = STATUS_WRITE_OP_DONE; - else - data_dir_mask = STATUS_DATA_TRANS_DONE; - - if (stat & data_dir_mask) { - clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); - imxmci_data_done(host, stat); - } - } - - if (test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) { - - if (host->cmd) - imxmci_cmd_done(host, STATUS_TIME_OUT_RESP); - - if (host->data) - imxmci_data_done(host, STATUS_TIME_OUT_READ | - STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR); - - if (host->req) - imxmci_finish_request(host, host->req); - - mmc_detect_change(host->mmc, msecs_to_jiffies(100)); - - } -} - -static void imxmci_request(struct mmc_host *mmc, struct mmc_request *req) -{ - struct imxmci_host *host = mmc_priv(mmc); - unsigned int cmdat; - - WARN_ON(host->req != NULL); - - host->req = req; - - cmdat = 0; - - if (req->data) { - imxmci_setup_data(host, req->data); - - cmdat |= CMD_DAT_CONT_DATA_ENABLE; - - if (req->data->flags & MMC_DATA_WRITE) - cmdat |= CMD_DAT_CONT_WRITE; - - if (req->data->flags & MMC_DATA_STREAM) - cmdat |= CMD_DAT_CONT_STREAM_BLOCK; - } - - imxmci_start_cmd(host, req->cmd, cmdat); -} - -#define CLK_RATE 19200000 - -static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -{ - struct imxmci_host *host = mmc_priv(mmc); - int prescaler; - - if (ios->bus_width == MMC_BUS_WIDTH_4) { - host->actual_bus_width = MMC_BUS_WIDTH_4; - imx_gpio_mode(PB11_PF_SD_DAT3); - BLR(host->dma) = 0; /* burst 64 byte read/write */ - } else { - host->actual_bus_width = MMC_BUS_WIDTH_1; - imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); - BLR(host->dma) = 16; /* burst 16 byte read/write */ - } - - if (host->power_mode != ios->power_mode) { - switch (ios->power_mode) { - case MMC_POWER_OFF: - break; - case MMC_POWER_UP: - set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events); - break; - case MMC_POWER_ON: - break; - } - host->power_mode = ios->power_mode; - } - - if (ios->clock) { - unsigned int clk; - u16 reg; - - /* The prescaler is 5 for PERCLK2 equal to 96MHz - * then 96MHz / 5 = 19.2 MHz - */ - clk = clk_get_rate(host->clk); - prescaler = (clk + (CLK_RATE * 7) / 8) / CLK_RATE; - switch (prescaler) { - case 0: - case 1: prescaler = 0; - break; - case 2: prescaler = 1; - break; - case 3: prescaler = 2; - break; - case 4: prescaler = 4; - break; - default: - case 5: prescaler = 5; - break; - } - - dev_dbg(mmc_dev(host->mmc), "PERCLK2 %d MHz -> prescaler %d\n", - clk, prescaler); - - for (clk = 0; clk < 8; clk++) { - int x; - x = CLK_RATE / (1 << clk); - if (x <= ios->clock) - break; - } - - /* enable controller */ - reg = readw(host->base + MMC_REG_STR_STP_CLK); - writew(reg | STR_STP_CLK_ENABLE, - host->base + MMC_REG_STR_STP_CLK); - - imxmci_stop_clock(host); - writew((prescaler << 3) | clk, host->base + MMC_REG_CLK_RATE); - /* - * Under my understanding, clock should not be started there, because it would - * initiate SDHC sequencer and send last or random command into card - */ - /* imxmci_start_clock(host); */ - - dev_dbg(mmc_dev(host->mmc), - "MMC_CLK_RATE: 0x%08x\n", - readw(host->base + MMC_REG_CLK_RATE)); - } else { - imxmci_stop_clock(host); - } -} - -static int imxmci_get_ro(struct mmc_host *mmc) -{ - struct imxmci_host *host = mmc_priv(mmc); - - if (host->pdata && host->pdata->get_ro) - return !!host->pdata->get_ro(mmc_dev(mmc)); - /* - * Board doesn't support read only detection; let the mmc core - * decide what to do. - */ - return -ENOSYS; -} - - -static const struct mmc_host_ops imxmci_ops = { - .request = imxmci_request, - .set_ios = imxmci_set_ios, - .get_ro = imxmci_get_ro, -}; - -static void imxmci_check_status(unsigned long data) -{ - struct imxmci_host *host = (struct imxmci_host *)data; - - if (host->pdata && host->pdata->card_present && - host->pdata->card_present(mmc_dev(host->mmc)) != host->present) { - host->present ^= 1; - dev_info(mmc_dev(host->mmc), "card %s\n", - host->present ? "inserted" : "removed"); - - set_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events); - tasklet_schedule(&host->tasklet); - } - - if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) || - test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { - atomic_inc(&host->stuck_timeout); - if (atomic_read(&host->stuck_timeout) > 4) - tasklet_schedule(&host->tasklet); - } else { - atomic_set(&host->stuck_timeout, 0); - - } - - mod_timer(&host->timer, jiffies + (HZ>>1)); -} - -static int __init imxmci_probe(struct platform_device *pdev) -{ - struct mmc_host *mmc; - struct imxmci_host *host = NULL; - struct resource *r; - int ret = 0, irq; - u16 rev_no; - - pr_info("i.MX mmc driver\n"); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irq = platform_get_irq(pdev, 0); - if (!r || irq < 0) - return -ENXIO; - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (!r) - return -EBUSY; - - mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto out; - } - - mmc->ops = &imxmci_ops; - mmc->f_min = 150000; - mmc->f_max = CLK_RATE/2; - mmc->ocr_avail = MMC_VDD_32_33; - mmc->caps = MMC_CAP_4_BIT_DATA; - - /* MMC core transfer sizes tunable parameters */ - mmc->max_segs = 64; - mmc->max_seg_size = 64*512; /* default PAGE_CACHE_SIZE */ - mmc->max_req_size = 64*512; /* default PAGE_CACHE_SIZE */ - mmc->max_blk_size = 2048; - mmc->max_blk_count = 65535; - - host = mmc_priv(mmc); - host->base = ioremap(r->start, resource_size(r)); - if (!host->base) { - ret = -ENOMEM; - goto out; - } - - host->mmc = mmc; - host->dma_allocated = 0; - host->pdata = pdev->dev.platform_data; - if (!host->pdata) - dev_warn(&pdev->dev, "No platform data provided!\n"); - - spin_lock_init(&host->lock); - host->res = r; - host->irq = irq; - - host->clk = clk_get(&pdev->dev, "perclk2"); - if (IS_ERR(host->clk)) { - ret = PTR_ERR(host->clk); - goto out; - } - clk_enable(host->clk); - - imx_gpio_mode(PB8_PF_SD_DAT0); - imx_gpio_mode(PB9_PF_SD_DAT1); - imx_gpio_mode(PB10_PF_SD_DAT2); - /* Configured as GPIO with pull-up to ensure right MCC card mode */ - /* Switched to PB11_PF_SD_DAT3 if 4 bit bus is configured */ - imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); - /* imx_gpio_mode(PB11_PF_SD_DAT3); */ - imx_gpio_mode(PB12_PF_SD_CLK); - imx_gpio_mode(PB13_PF_SD_CMD); - - imxmci_softreset(host); - - rev_no = readw(host->base + MMC_REG_REV_NO); - if (rev_no != 0x390) { - dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n", - readw(host->base + MMC_REG_REV_NO)); - goto out; - } - - /* recommended in data sheet */ - writew(0x2db4, host->base + MMC_REG_READ_TO); - - host->imask = IMXMCI_INT_MASK_DEFAULT; - writew(host->imask, host->base + MMC_REG_INT_MASK); - - host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW); - if(host->dma < 0) { - dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n"); - ret = -EBUSY; - goto out; - } - host->dma_allocated = 1; - imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host); - RSSR(host->dma) = DMA_REQ_SDHC; - - tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host); - host->status_reg=0; - host->pending_events=0; - - ret = request_irq(host->irq, imxmci_irq, 0, DRIVER_NAME, host); - if (ret) - goto out; - - if (host->pdata && host->pdata->card_present) - host->present = host->pdata->card_present(mmc_dev(mmc)); - else /* if there is no way to detect assume that card is present */ - host->present = 1; - - init_timer(&host->timer); - host->timer.data = (unsigned long)host; - host->timer.function = imxmci_check_status; - add_timer(&host->timer); - mod_timer(&host->timer, jiffies + (HZ >> 1)); - - platform_set_drvdata(pdev, mmc); - - mmc_add_host(mmc); - - return 0; - -out: - if (host) { - if (host->dma_allocated) { - imx_dma_free(host->dma); - host->dma_allocated = 0; - } - if (host->clk) { - clk_disable(host->clk); - clk_put(host->clk); - } - if (host->base) - iounmap(host->base); - } - if (mmc) - mmc_free_host(mmc); - release_mem_region(r->start, resource_size(r)); - return ret; -} - -static int __exit imxmci_remove(struct platform_device *pdev) -{ - struct mmc_host *mmc = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - if (mmc) { - struct imxmci_host *host = mmc_priv(mmc); - - tasklet_disable(&host->tasklet); - - del_timer_sync(&host->timer); - mmc_remove_host(mmc); - - free_irq(host->irq, host); - iounmap(host->base); - if (host->dma_allocated) { - imx_dma_free(host->dma); - host->dma_allocated = 0; - } - - tasklet_kill(&host->tasklet); - - clk_disable(host->clk); - clk_put(host->clk); - - release_mem_region(host->res->start, resource_size(host->res)); - - mmc_free_host(mmc); - } - return 0; -} - -#ifdef CONFIG_PM -static int imxmci_suspend(struct platform_device *dev, pm_message_t state) -{ - struct mmc_host *mmc = platform_get_drvdata(dev); - int ret = 0; - - if (mmc) - ret = mmc_suspend_host(mmc); - - return ret; -} - -static int imxmci_resume(struct platform_device *dev) -{ - struct mmc_host *mmc = platform_get_drvdata(dev); - struct imxmci_host *host; - int ret = 0; - - if (mmc) { - host = mmc_priv(mmc); - if (host) - set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events); - ret = mmc_resume_host(mmc); - } - - return ret; -} -#else -#define imxmci_suspend NULL -#define imxmci_resume NULL -#endif /* CONFIG_PM */ - -static struct platform_driver imxmci_driver = { - .remove = __exit_p(imxmci_remove), - .suspend = imxmci_suspend, - .resume = imxmci_resume, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - } -}; - -static int __init imxmci_init(void) -{ - return platform_driver_probe(&imxmci_driver, imxmci_probe); -} - -static void __exit imxmci_exit(void) -{ - platform_driver_unregister(&imxmci_driver); -} - -module_init(imxmci_init); -module_exit(imxmci_exit); - -MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); -MODULE_AUTHOR("Sascha Hauer, Pengutronix"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:imx-mmc"); diff --git a/drivers/mmc/host/imxmmc.h b/drivers/mmc/host/imxmmc.h deleted file mode 100644 index 09d5d4ee3a77..000000000000 --- a/drivers/mmc/host/imxmmc.h +++ /dev/null @@ -1,64 +0,0 @@ -#define MMC_REG_STR_STP_CLK 0x00 -#define MMC_REG_STATUS 0x04 -#define MMC_REG_CLK_RATE 0x08 -#define MMC_REG_CMD_DAT_CONT 0x0C -#define MMC_REG_RES_TO 0x10 -#define MMC_REG_READ_TO 0x14 -#define MMC_REG_BLK_LEN 0x18 -#define MMC_REG_NOB 0x1C -#define MMC_REG_REV_NO 0x20 -#define MMC_REG_INT_MASK 0x24 -#define MMC_REG_CMD 0x28 -#define MMC_REG_ARGH 0x2C -#define MMC_REG_ARGL 0x30 -#define MMC_REG_RES_FIFO 0x34 -#define MMC_REG_BUFFER_ACCESS 0x38 - -#define STR_STP_CLK_IPG_CLK_GATE_DIS (1<<15) -#define STR_STP_CLK_IPG_PERCLK_GATE_DIS (1<<14) -#define STR_STP_CLK_ENDIAN (1<<5) -#define STR_STP_CLK_RESET (1<<3) -#define STR_STP_CLK_ENABLE (1<<2) -#define STR_STP_CLK_START_CLK (1<<1) -#define STR_STP_CLK_STOP_CLK (1<<0) -#define STATUS_CARD_PRESENCE (1<<15) -#define STATUS_SDIO_INT_ACTIVE (1<<14) -#define STATUS_END_CMD_RESP (1<<13) -#define STATUS_WRITE_OP_DONE (1<<12) -#define STATUS_DATA_TRANS_DONE (1<<11) -#define STATUS_WR_CRC_ERROR_CODE_MASK (3<<10) -#define STATUS_CARD_BUS_CLK_RUN (1<<8) -#define STATUS_APPL_BUFF_FF (1<<7) -#define STATUS_APPL_BUFF_FE (1<<6) -#define STATUS_RESP_CRC_ERR (1<<5) -#define STATUS_CRC_READ_ERR (1<<3) -#define STATUS_CRC_WRITE_ERR (1<<2) -#define STATUS_TIME_OUT_RESP (1<<1) -#define STATUS_TIME_OUT_READ (1<<0) -#define STATUS_ERR_MASK 0x2f -#define CLK_RATE_PRESCALER(x) ((x) & 0x7) -#define CLK_RATE_CLK_RATE(x) (((x) & 0x7) << 3) -#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12) -#define CMD_DAT_CONT_STOP_READWAIT (1<<11) -#define CMD_DAT_CONT_START_READWAIT (1<<10) -#define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8) -#define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8) -#define CMD_DAT_CONT_INIT (1<<7) -#define CMD_DAT_CONT_BUSY (1<<6) -#define CMD_DAT_CONT_STREAM_BLOCK (1<<5) -#define CMD_DAT_CONT_WRITE (1<<4) -#define CMD_DAT_CONT_DATA_ENABLE (1<<3) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5) -#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6) -#define INT_MASK_AUTO_CARD_DETECT (1<<6) -#define INT_MASK_DAT0_EN (1<<5) -#define INT_MASK_SDIO (1<<4) -#define INT_MASK_BUF_READY (1<<3) -#define INT_MASK_END_CMD_RES (1<<2) -#define INT_MASK_WRITE_OP_DONE (1<<1) -#define INT_MASK_DATA_TRAN (1<<0) -#define INT_ALL (0x7f) -- cgit v1.2.3 From bbbc4c4d8c5face097d695f9bf3a39647ba6b7e7 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 16 Apr 2012 19:16:54 -0400 Subject: mmc: sdio: avoid spurious calls to interrupt handlers Commit 06e8935feb ("optimized SDIO IRQ handling for single irq") introduced some spurious calls to SDIO function interrupt handlers, such as when the SDIO IRQ thread is started, or the safety check performed upon a system resume. Let's add a flag to perform the optimization only when a real interrupt is signaled by the host driver and we know there is no point confirming it. Reported-by: Sujit Reddy Thumma Signed-off-by: Nicolas Pitre Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/core/sdio.c | 2 +- drivers/mmc/core/sdio_irq.c | 11 +++++++---- include/linux/mmc/host.h | 2 ++ 3 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 2c7c83f832d2..13d0e95380ab 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -947,7 +947,7 @@ static int mmc_sdio_resume(struct mmc_host *host) } if (!err && host->sdio_irqs) - mmc_signal_sdio_irq(host); + wake_up_process(host->sdio_irq_thread); mmc_release_host(host); /* diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index f573e7f9f740..3d8ceb4084de 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -28,18 +28,20 @@ #include "sdio_ops.h" -static int process_sdio_pending_irqs(struct mmc_card *card) +static int process_sdio_pending_irqs(struct mmc_host *host) { + struct mmc_card *card = host->card; int i, ret, count; unsigned char pending; struct sdio_func *func; /* * Optimization, if there is only 1 function interrupt registered - * call irq handler directly + * and we know an IRQ was signaled then call irq handler directly. + * Otherwise do the full probe. */ func = card->sdio_single_irq; - if (func) { + if (func && host->sdio_irq_pending) { func->irq_handler(func); return 1; } @@ -116,7 +118,8 @@ static int sdio_irq_thread(void *_host) ret = __mmc_claim_host(host, &host->sdio_irq_thread_abort); if (ret) break; - ret = process_sdio_pending_irqs(host->card); + ret = process_sdio_pending_irqs(host); + host->sdio_irq_pending = false; mmc_release_host(host); /* diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index cbde4b7e675e..0707d228d7f1 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -297,6 +297,7 @@ struct mmc_host { unsigned int sdio_irqs; struct task_struct *sdio_irq_thread; + bool sdio_irq_pending; atomic_t sdio_irq_thread_abort; mmc_pm_flag_t pm_flags; /* requested pm features */ @@ -352,6 +353,7 @@ extern int mmc_cache_ctrl(struct mmc_host *, u8); static inline void mmc_signal_sdio_irq(struct mmc_host *host) { host->ops->enable_sdio_irq(host, 0); + host->sdio_irq_pending = true; wake_up_process(host->sdio_irq_thread); } -- cgit v1.2.3 From ca5879d3ffebd967e94b2dc3b1a3dc089709206f Mon Sep 17 00:00:00 2001 From: Pavan Kunapuli Date: Wed, 18 Apr 2012 18:48:02 +0530 Subject: mmc: tegra: support SDHCI SPEC 300 Tegra3 SDHOST controller doesn't advertise v3.00 support by default. This support has to be enabled by configuring a vendor register in the tegra3 sd host address space. Signed-off-by: Pavan Kunapuli Acked-by: Stephen Warren Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-tegra.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 53b26502f6e2..cff0c522b4ab 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -32,8 +32,13 @@ #include "sdhci-pltfm.h" +/* Tegra SDHOST controller vendor register definitions */ +#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120 +#define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 0x20 + #define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0) #define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1) +#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2) struct sdhci_tegra_soc_data { struct sdhci_pltfm_data *pdata; @@ -120,6 +125,25 @@ static irqreturn_t carddetect_irq(int irq, void *data) return IRQ_HANDLED; }; +static void tegra_sdhci_reset_exit(struct sdhci_host *host, u8 mask) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + + if (!(mask & SDHCI_RESET_ALL)) + return; + + /* Erratum: Enable SDHCI spec v3.00 support */ + if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300) { + u32 misc_ctrl; + + misc_ctrl = sdhci_readb(host, SDHCI_TEGRA_VENDOR_MISC_CTRL); + misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300; + sdhci_writeb(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL); + } +} + static int tegra_sdhci_8bit(struct sdhci_host *host, int bus_width) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -148,6 +172,7 @@ static struct sdhci_ops tegra_sdhci_ops = { .read_w = tegra_sdhci_readw, .write_l = tegra_sdhci_writel, .platform_8bit_width = tegra_sdhci_8bit, + .platform_reset_exit = tegra_sdhci_reset_exit, }; #ifdef CONFIG_ARCH_TEGRA_2x_SOC @@ -178,6 +203,7 @@ static struct sdhci_pltfm_data sdhci_tegra30_pdata = { static struct sdhci_tegra_soc_data soc_data_tegra30 = { .pdata = &sdhci_tegra30_pdata, + .nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300, }; #endif -- cgit v1.2.3 From 48b332f9916f33ba0001b78e5cea49ef17f3c81e Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Apr 2012 11:11:57 +0100 Subject: mmc: omap_hsmmc: release correct resource res can be one of several resources, as this variable is re-used several times during probe. This can cause the wrong resource parameters to be passed to release_mem_region(). Get the original memory resource before calling release_mem_region(). Signed-off-by: Russell King Acked-by: Tony Lindgren Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 4254b6f310aa..d15b149649bf 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2042,7 +2042,9 @@ err1: err_alloc: omap_hsmmc_gpio_free(pdata); err: - release_mem_region(res->start, resource_size(res)); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, resource_size(res)); return ret; } -- cgit v1.2.3 From 0dd1bfeb6cc89467261cc62ca81e0ac5da78ec0a Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Mon, 23 Apr 2012 15:18:02 +0800 Subject: mmc: core: check PM_SLEEP for mmc_bus_suspend/resume callbacks If PM_SLEEP is not enabled, mmc.c will give warnning since mmc_bus_suspend/ mmc_bus_resume functions are defined but not used. This patch can fix this warnning. Reported-by: Andrew Lunn Signed-off-by: Chuanxiao Dong Signed-off-by: Chris Ball --- drivers/mmc/core/bus.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index c60cee92a2b2..9b68933f27e7 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -122,6 +122,7 @@ static int mmc_bus_remove(struct device *dev) return 0; } +#ifdef CONFIG_PM_SLEEP static int mmc_bus_suspend(struct device *dev) { struct mmc_driver *drv = to_mmc_driver(dev->driver); @@ -143,6 +144,7 @@ static int mmc_bus_resume(struct device *dev) ret = drv->resume(card); return ret; } +#endif #ifdef CONFIG_PM_RUNTIME -- cgit v1.2.3 From 0e9f480bb553d39ee06ccd45639ba7a5446a7b81 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 24 Apr 2012 17:56:29 +0200 Subject: mmc: cd-gpio: protect against NULL context in mmc_cd_gpio_free() Do not oops, even if mmc_cd_gpio_free() is mistakenly called on a driver cleanup path, even though a previous call to mmc_cd_gpio_request() failed. Signed-off-by: Guennadi Liakhovetski [stable@: please apply to 3.3-stable] Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/core/cd-gpio.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c index 2c14be73254c..f13e38deceac 100644 --- a/drivers/mmc/core/cd-gpio.c +++ b/drivers/mmc/core/cd-gpio.c @@ -73,6 +73,9 @@ void mmc_cd_gpio_free(struct mmc_host *host) { struct mmc_cd_gpio *cd = host->hotplug.handler_priv; + if (!cd) + return; + free_irq(host->hotplug.irq, host); gpio_free(cd->gpio); kfree(cd); -- cgit v1.2.3 From 3524b5d1edbcaf0aae9196ac942d8307624ff3f0 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 27 Mar 2012 08:40:34 +0530 Subject: mmc: sdhci-spear: No need to check 'pdev == NULL' in probe pdev is guaranteed to be valid in probe. And so check for non-NULL is not required. Remove it. Signed-off-by: Viresh Kumar Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-spear.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index 6dfa82e03c7e..15191c1d999a 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -75,8 +75,6 @@ static int __devinit sdhci_probe(struct platform_device *pdev) struct spear_sdhci *sdhci; int ret; - BUG_ON(pdev == NULL); - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!iomem) { ret = -ENOMEM; -- cgit v1.2.3 From 6ebaf8f2b0f9e67ac2e00ba7af04a58b39312b3c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 27 Mar 2012 08:40:35 +0530 Subject: mmc: sdhci-spear: Use devm_* derivatives This patch replaces normal calls to resource allocation routines with devm_*() derivative of those routines. This removes the need to free those resources inside the driver. Signed-off-by: Viresh Kumar Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-spear.c | 80 ++++++++++++++---------------------------- 1 file changed, 27 insertions(+), 53 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index 15191c1d999a..1fe32dfa7cd4 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -82,18 +82,18 @@ static int __devinit sdhci_probe(struct platform_device *pdev) goto err; } - if (!request_mem_region(iomem->start, resource_size(iomem), - "spear-sdhci")) { + if (!devm_request_mem_region(&pdev->dev, iomem->start, + resource_size(iomem), "spear-sdhci")) { ret = -EBUSY; dev_dbg(&pdev->dev, "cannot request region\n"); goto err; } - sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL); + sdhci = devm_kzalloc(&pdev->dev, sizeof(*sdhci), GFP_KERNEL); if (!sdhci) { ret = -ENOMEM; dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n"); - goto err_kzalloc; + goto err; } /* clk enable */ @@ -101,13 +101,13 @@ static int __devinit sdhci_probe(struct platform_device *pdev) if (IS_ERR(sdhci->clk)) { ret = PTR_ERR(sdhci->clk); dev_dbg(&pdev->dev, "Error getting clock\n"); - goto err_clk_get; + goto err; } ret = clk_enable(sdhci->clk); if (ret) { dev_dbg(&pdev->dev, "Error enabling clock\n"); - goto err_clk_enb; + goto put_clk; } /* overwrite platform_data */ @@ -122,7 +122,7 @@ static int __devinit sdhci_probe(struct platform_device *pdev) if (IS_ERR(host)) { ret = PTR_ERR(host); dev_dbg(&pdev->dev, "error allocating host\n"); - goto err_alloc_host; + goto disable_clk; } host->hw_name = "sdhci"; @@ -130,17 +130,18 @@ static int __devinit sdhci_probe(struct platform_device *pdev) host->irq = platform_get_irq(pdev, 0); host->quirks = SDHCI_QUIRK_BROKEN_ADMA; - host->ioaddr = ioremap(iomem->start, resource_size(iomem)); + host->ioaddr = devm_ioremap(&pdev->dev, iomem->start, + resource_size(iomem)); if (!host->ioaddr) { ret = -ENOMEM; dev_dbg(&pdev->dev, "failed to remap registers\n"); - goto err_ioremap; + goto free_host; } ret = sdhci_add_host(host); if (ret) { dev_dbg(&pdev->dev, "error adding host\n"); - goto err_add_host; + goto free_host; } platform_set_drvdata(pdev, host); @@ -159,11 +160,12 @@ static int __devinit sdhci_probe(struct platform_device *pdev) if (sdhci->data->card_power_gpio >= 0) { int val = 0; - ret = gpio_request(sdhci->data->card_power_gpio, "sdhci"); + ret = devm_gpio_request(&pdev->dev, + sdhci->data->card_power_gpio, "sdhci"); if (ret < 0) { dev_dbg(&pdev->dev, "gpio request fail: %d\n", sdhci->data->card_power_gpio); - goto err_pgpio_request; + goto set_drvdata; } if (sdhci->data->power_always_enb) @@ -175,60 +177,48 @@ static int __devinit sdhci_probe(struct platform_device *pdev) if (ret) { dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", sdhci->data->card_power_gpio); - goto err_pgpio_direction; + goto set_drvdata; } } if (sdhci->data->card_int_gpio >= 0) { - ret = gpio_request(sdhci->data->card_int_gpio, "sdhci"); + ret = devm_gpio_request(&pdev->dev, sdhci->data->card_int_gpio, + "sdhci"); if (ret < 0) { dev_dbg(&pdev->dev, "gpio request fail: %d\n", sdhci->data->card_int_gpio); - goto err_igpio_request; + goto set_drvdata; } ret = gpio_direction_input(sdhci->data->card_int_gpio); if (ret) { dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", sdhci->data->card_int_gpio); - goto err_igpio_direction; + goto set_drvdata; } - ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio), + ret = devm_request_irq(&pdev->dev, + gpio_to_irq(sdhci->data->card_int_gpio), sdhci_gpio_irq, IRQF_TRIGGER_LOW, mmc_hostname(host->mmc), pdev); if (ret) { dev_dbg(&pdev->dev, "gpio request irq fail: %d\n", sdhci->data->card_int_gpio); - goto err_igpio_request_irq; + goto set_drvdata; } } return 0; -err_igpio_request_irq: -err_igpio_direction: - if (sdhci->data->card_int_gpio >= 0) - gpio_free(sdhci->data->card_int_gpio); -err_igpio_request: -err_pgpio_direction: - if (sdhci->data->card_power_gpio >= 0) - gpio_free(sdhci->data->card_power_gpio); -err_pgpio_request: +set_drvdata: platform_set_drvdata(pdev, NULL); sdhci_remove_host(host, 1); -err_add_host: - iounmap(host->ioaddr); -err_ioremap: +free_host: sdhci_free_host(host); -err_alloc_host: +disable_clk: clk_disable(sdhci->clk); -err_clk_enb: +put_clk: clk_put(sdhci->clk); -err_clk_get: - kfree(sdhci); -err_kzalloc: - release_mem_region(iomem->start, resource_size(iomem)); err: dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret); return ret; @@ -237,35 +227,19 @@ err: static int __devexit sdhci_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); - struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); - int dead; + int dead = 0; u32 scratch; - if (sdhci->data) { - if (sdhci->data->card_int_gpio >= 0) { - free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev); - gpio_free(sdhci->data->card_int_gpio); - } - - if (sdhci->data->card_power_gpio >= 0) - gpio_free(sdhci->data->card_power_gpio); - } - platform_set_drvdata(pdev, NULL); - dead = 0; scratch = readl(host->ioaddr + SDHCI_INT_STATUS); if (scratch == (u32)-1) dead = 1; sdhci_remove_host(host, dead); - iounmap(host->ioaddr); sdhci_free_host(host); clk_disable(sdhci->clk); clk_put(sdhci->clk); - kfree(sdhci); - if (iomem) - release_mem_region(iomem->start, resource_size(iomem)); return 0; } -- cgit v1.2.3 From 000bc9d5ed296550e7009f56cbdb4b35459beb69 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 16 Apr 2012 10:18:43 +0100 Subject: mmc: mmci: Enable Device Tree support for ux500 variants Provide a means to collect attributes specific to ST-Ericsson's ux500 variant series. This patch registers itself as the AMBA driver to be called during the probe process. Once all attributes and ux500 specifics are are collected the normal mmci core probe is called. Signed-off-by: Lee Jones Acked-by: Linus Walleij Acked-by: Arnd Bergmann Signed-off-by: Chris Ball --- drivers/mmc/host/mmci.c | 58 +++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 54 insertions(+), 4 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 032b84791a16..5a7da175201c 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -1196,21 +1197,70 @@ static const struct mmc_host_ops mmci_ops = { .get_cd = mmci_get_cd, }; +#ifdef CONFIG_OF +static void mmci_dt_populate_generic_pdata(struct device_node *np, + struct mmci_platform_data *pdata) +{ + int bus_width = 0; + + of_property_read_u32(np, "wp-gpios", &pdata->gpio_wp); + if (!pdata->gpio_wp) + pdata->gpio_wp = -1; + + of_property_read_u32(np, "cd-gpios", &pdata->gpio_cd); + if (!pdata->gpio_cd) + pdata->gpio_cd = -1; + + if (of_get_property(np, "cd-inverted", NULL)) + pdata->cd_invert = true; + else + pdata->cd_invert = false; + + of_property_read_u32(np, "max-frequency", &pdata->f_max); + if (!pdata->f_max) + pr_warn("%s has no 'max-frequency' property\n", np->full_name); + + if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL)) + pdata->capabilities |= MMC_CAP_MMC_HIGHSPEED; + if (of_get_property(np, "mmc-cap-sd-highspeed", NULL)) + pdata->capabilities |= MMC_CAP_SD_HIGHSPEED; + + of_property_read_u32(np, "bus-width", &bus_width); + switch (bus_width) { + case 0 : + /* No bus-width supplied. */ + break; + case 4 : + pdata->capabilities |= MMC_CAP_4_BIT_DATA; + break; + case 8 : + pdata->capabilities |= MMC_CAP_8_BIT_DATA; + break; + default : + pr_warn("%s: Unsupported bus width\n", np->full_name); + } +} +#endif + static int __devinit mmci_probe(struct amba_device *dev, const struct amba_id *id) { struct mmci_platform_data *plat = dev->dev.platform_data; + struct device_node *np = dev->dev.of_node; struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; int ret; - /* must have platform data */ - if (!plat) { - ret = -EINVAL; - goto out; + /* Must have platform data or Device Tree. */ + if (!plat && !np) { + dev_err(&dev->dev, "No plat data or DT found\n"); + return -EINVAL; } + if (np) + mmci_dt_populate_generic_pdata(np, plat); + ret = amba_request_regions(dev, DRIVER_NAME); if (ret) goto out; -- cgit v1.2.3 From 9a597016058520665452390df919428e4edd7770 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 12 Apr 2012 16:51:13 +0100 Subject: mmc: mmci: Use correct GPIO binding for IRQ requests Now there are irqdomains in place for Snowball, we can request GPIO IRQs directly by their binding. This replaces the previous method of hard-coding the hwirq using u32 values in the DT. Signed-off-by: Lee Jones Signed-off-by: Chris Ball --- drivers/mmc/host/mmci.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 5a7da175201c..2303a16263ef 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -1203,11 +1204,11 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np, { int bus_width = 0; - of_property_read_u32(np, "wp-gpios", &pdata->gpio_wp); + pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0); if (!pdata->gpio_wp) pdata->gpio_wp = -1; - of_property_read_u32(np, "cd-gpios", &pdata->gpio_cd); + pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0); if (!pdata->gpio_cd) pdata->gpio_cd = -1; -- cgit v1.2.3 From c0a120a4bc68f5dc5f5238e76013cc18bac0ffed Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 8 May 2012 13:59:38 +0100 Subject: mmc: mmci: Fix compiler error when CONFIG_OF is not set error: implicit declaration of function 'mmci_dt_populate_generic_pdata' This is due to the '#if CONFIG_OF' guards placed around mmci_dt_populate_generic_pdata(), but not around the call to it. We repair this by inserting a stub which elegantly returns when CONFIG_OF is not set. Reported-by: Paul Gortmaker Signed-off-by: Lee Jones Signed-off-by: Chris Ball --- drivers/mmc/host/mmci.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2303a16263ef..efc822df4b75 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1241,6 +1241,12 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np, pr_warn("%s: Unsupported bus width\n", np->full_name); } } +#else +static void mmci_dt_populate_generic_pdata(struct device_node *np, + struct mmci_platform_data *pdata) +{ + return; +} #endif static int __devinit mmci_probe(struct amba_device *dev, -- cgit v1.2.3 From 96cf5f02aee8bbeff38824b18b9ec583d687f846 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 25 Apr 2012 16:17:37 +0900 Subject: mmc: core: fix the decision of HS200/DDR card-type Current implementation decides the card type exclusively. Even though eMMC device can support both HS200 and DDR mode, card type will be set only for HS200. If the host doesn't support HS200 but has DDR capability, then DDR mode can't be selected. Signed-off-by: Seungwon Jeon Reviewed-by: Subhash Jadavani Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 81 +++++++++++++++++++----------------------------- include/linux/mmc/card.h | 4 +++ include/linux/mmc/mmc.h | 60 ----------------------------------- 3 files changed, 36 insertions(+), 109 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 54df5adc0413..0477769a8841 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -235,6 +235,36 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) return err; } +static void mmc_select_card_type(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK; + unsigned int caps = host->caps, caps2 = host->caps2; + unsigned int hs_max_dtr = 0; + + if (card_type & EXT_CSD_CARD_TYPE_26) + hs_max_dtr = MMC_HIGH_26_MAX_DTR; + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_52) + hs_max_dtr = MMC_HIGH_52_MAX_DTR; + + if ((caps & MMC_CAP_1_8V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) || + (caps & MMC_CAP_1_2V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)) + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + + if ((caps2 & MMC_CAP2_HS200_1_8V_SDR && + card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) || + (caps2 & MMC_CAP2_HS200_1_2V_SDR && + card_type & EXT_CSD_CARD_TYPE_SDR_1_2V)) + hs_max_dtr = MMC_HS200_MAX_DTR; + + card->ext_csd.hs_max_dtr = hs_max_dtr; + card->ext_csd.card_type = card_type; +} + /* * Decode extended CSD. */ @@ -284,56 +314,9 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512) mmc_card_set_blockaddr(card); } + card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; - switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { - case EXT_CSD_CARD_TYPE_SDR_ALL: - case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V: - case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V: - case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52: - card->ext_csd.hs_max_dtr = 200000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200; - break; - case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL: - case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V: - case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V: - case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52: - card->ext_csd.hs_max_dtr = 200000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V; - break; - case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL: - case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V: - case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V: - case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52: - card->ext_csd.hs_max_dtr = 200000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V; - break; - case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_52; - break; - case EXT_CSD_CARD_TYPE_DDR_1_2V | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_2V; - break; - case EXT_CSD_CARD_TYPE_DDR_1_8V | EXT_CSD_CARD_TYPE_52 | - EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_8V; - break; - case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 52000000; - break; - case EXT_CSD_CARD_TYPE_26: - card->ext_csd.hs_max_dtr = 26000000; - break; - default: - /* MMC v4 spec says this cannot happen */ - pr_warning("%s: card is mmc v4 but doesn't " - "support any high-speed modes.\n", - mmc_hostname(card->host)); - } + mmc_select_card_type(card); card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT]; card->ext_csd.raw_erase_timeout_mult = diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 629b823f8836..d76513b5b263 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -58,6 +58,10 @@ struct mmc_ext_csd { unsigned int generic_cmd6_time; /* Units: 10ms */ unsigned int power_off_longtime; /* Units: ms */ unsigned int hs_max_dtr; +#define MMC_HIGH_26_MAX_DTR 26000000 +#define MMC_HIGH_52_MAX_DTR 52000000 +#define MMC_HIGH_DDR_MAX_DTR 52000000 +#define MMC_HS200_MAX_DTR 200000000 unsigned int sectors; unsigned int card_type; unsigned int hc_erase_size; /* In sectors */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index b822a2cb6008..d425cab144d9 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -354,66 +354,6 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */ /* SDR mode @1.2V I/O */ -#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V | \ - EXT_CSD_CARD_TYPE_SDR_1_2V) - -#define EXT_CSD_CARD_TYPE_SDR_ALL (EXT_CSD_CARD_TYPE_SDR_200 | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_1_2V_ALL (EXT_CSD_CARD_TYPE_SDR_1_2V | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_1_8V_ALL (EXT_CSD_CARD_TYPE_SDR_1_8V | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_2V | \ - EXT_CSD_CARD_TYPE_DDR_1_8V | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_8V | \ - EXT_CSD_CARD_TYPE_DDR_1_8V | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_2V | \ - EXT_CSD_CARD_TYPE_DDR_1_2V | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_8V | \ - EXT_CSD_CARD_TYPE_DDR_1_2V | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_2V | \ - EXT_CSD_CARD_TYPE_DDR_52 | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_8V | \ - EXT_CSD_CARD_TYPE_DDR_52 | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_200 | \ - EXT_CSD_CARD_TYPE_DDR_1_8V | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_200 | \ - EXT_CSD_CARD_TYPE_DDR_1_2V | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - -#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52 (EXT_CSD_CARD_TYPE_SDR_200 | \ - EXT_CSD_CARD_TYPE_DDR_52 | \ - EXT_CSD_CARD_TYPE_52 | \ - EXT_CSD_CARD_TYPE_26) - #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ -- cgit v1.2.3 From 10942aa40a595d7ff8b4e90f8a762e816367cac3 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 25 Apr 2012 16:18:01 +0900 Subject: mmc: core: fix the signaling 1.8V for HS200 Currently only 1.2V is treated for HS200 mode. If the host has only 1.8V I/O capability not 1.2V, mmc_set_signal_voltage can't be called for 1.8V HS200. EXT_CSD_CARD_TYPE_SDR_1_8V needs to be considered. Signed-off-by: Seungwon Jeon Reviewed-by: Subhash Jadavani Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 0477769a8841..2a9b7b1a4801 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -728,7 +728,7 @@ static int mmc_select_powerclass(struct mmc_card *card, */ static int mmc_select_hs200(struct mmc_card *card) { - int idx, err = 0; + int idx, err = -EINVAL; struct mmc_host *host; static unsigned ext_csd_bits[] = { EXT_CSD_BUS_WIDTH_4, @@ -744,10 +744,12 @@ static int mmc_select_hs200(struct mmc_card *card) host = card->host; if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V && - host->caps2 & MMC_CAP2_HS200_1_2V_SDR) - if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0)) - err = mmc_set_signal_voltage(host, - MMC_SIGNAL_VOLTAGE_180, 0); + host->caps2 & MMC_CAP2_HS200_1_2V_SDR) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0); + + if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V && + host->caps2 & MMC_CAP2_HS200_1_8V_SDR) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 0); /* If fails try again during next card power cycle */ if (err) -- cgit v1.2.3 From 3d93576e3442a2becb91290d62f1c105fec1150c Mon Sep 17 00:00:00 2001 From: Subhash Jadavani Date: Thu, 12 Apr 2012 19:36:07 +0530 Subject: mmc: core: skip card initialization if power class selection fails With current implementation of power class selection, mmc_select_powerclass() should never fail. So treat any error returned by this function as serious enough to skip the card initialization. Signed-off-by: Subhash Jadavani Reviewed-by: Namjae Jeon Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2a9b7b1a4801..163046030773 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -719,6 +719,10 @@ static int mmc_select_powerclass(struct mmc_card *card, card->ext_csd.generic_cmd6_time); } + if (err) + pr_err("%s: power class selection for ext_csd_bus_width %d" + " failed\n", mmc_hostname(card->host), bus_width); + return err; } @@ -1102,9 +1106,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; err = mmc_select_powerclass(card, ext_csd_bits, ext_csd); if (err) - pr_warning("%s: power class selection to bus width %d" - " failed\n", mmc_hostname(card->host), - 1 << bus_width); + goto err; } /* @@ -1136,10 +1138,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_powerclass(card, ext_csd_bits[idx][0], ext_csd); if (err) - pr_warning("%s: power class selection to " - "bus width %d failed\n", - mmc_hostname(card->host), - 1 << bus_width); + goto err; err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, @@ -1167,10 +1166,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_powerclass(card, ext_csd_bits[idx][1], ext_csd); if (err) - pr_warning("%s: power class selection to " - "bus width %d ddr %d failed\n", - mmc_hostname(card->host), - 1 << bus_width, ddr); + goto err; err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, -- cgit v1.2.3 From 1b50f5f392e31ab41a272ed3b438f603c09be3f0 Mon Sep 17 00:00:00 2001 From: Venkatraman S Date: Fri, 13 Apr 2012 17:54:11 +0530 Subject: mmc: queue: rename mmc_request function The name mmc_request is used for both the issue function and a data structure, which creates conflicts in symbol lookups in editors. Rename the function to mmc_request_fn. Signed-off-by: Venkatraman S Reviewed-by: Namjae Jeon Signed-off-by: Chris Ball --- drivers/mmc/card/queue.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 996f8e36e23d..49af43c97323 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -96,7 +96,7 @@ static int mmc_queue_thread(void *d) * on any queue on this host, and attempt to issue it. This may * not be the queue we were asked to process. */ -static void mmc_request(struct request_queue *q) +static void mmc_request_fn(struct request_queue *q) { struct mmc_queue *mq = q->queuedata; struct request *req; @@ -171,7 +171,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, limit = *mmc_dev(host)->dma_mask; mq->card = card; - mq->queue = blk_init_queue(mmc_request, lock); + mq->queue = blk_init_queue(mmc_request_fn, lock); if (!mq->queue) return -ENOMEM; -- cgit v1.2.3 From b41b6f1d1cb6a16c737c4699d2815112ec21faa6 Mon Sep 17 00:00:00 2001 From: Venkatraman S Date: Fri, 13 Apr 2012 17:54:13 +0530 Subject: mmc: queue: remove redundant memsets Not needed to memset, as they are pointers and are assigned to proper values in the next line anyway. Signed-off-by: Venkatraman S Reviewed-by: Namjae Jeon Signed-off-by: Chris Ball --- drivers/mmc/card/queue.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 49af43c97323..e360a979857d 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -175,8 +175,6 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, if (!mq->queue) return -ENOMEM; - memset(&mq->mqrq_cur, 0, sizeof(mq->mqrq_cur)); - memset(&mq->mqrq_prev, 0, sizeof(mq->mqrq_prev)); mq->mqrq_cur = mqrq_cur; mq->mqrq_prev = mqrq_prev; mq->queue->queuedata = mq; -- cgit v1.2.3 From 95dcc2cb6c9c84555c29187f8b7cf39e83991a29 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Tue, 1 May 2012 14:57:36 -0700 Subject: mmc: dw_mmc: make multiple instances of dw_mci_card_workqueue The variable 'dw_mci_card_workqueue' is a global variable shared between multiple instances of the dw_mmc host controller. Due to this, data corruption has been noticed when multiple instances of dw_mmc controllers are actively reading/writing the media. Fix this by adding a instance of 'struct workqueue_struct' for each host instance and removing the global 'dw_mci_card_workqueue' instance. Signed-off-by: Thomas Abraham Acked-by: Jaehoon Chung Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 14 ++++++-------- include/linux/mmc/dw_mmc.h | 1 + 2 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index ab3fc4617107..1532357787cb 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -100,8 +100,6 @@ struct dw_mci_slot { int last_detect_state; }; -static struct workqueue_struct *dw_mci_card_workqueue; - #if defined(CONFIG_DEBUG_FS) static int dw_mci_req_show(struct seq_file *s, void *v) { @@ -1605,7 +1603,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & SDMMC_INT_CD) { mci_writel(host, RINTSTS, SDMMC_INT_CD); - queue_work(dw_mci_card_workqueue, &host->card_work); + queue_work(host->card_workqueue, &host->card_work); } /* Handle SDIO Interrupts */ @@ -1844,7 +1842,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) * Card may have been plugged in prior to boot so we * need to run the detect tasklet */ - queue_work(dw_mci_card_workqueue, &host->card_work); + queue_work(host->card_workqueue, &host->card_work); return 0; } @@ -2021,9 +2019,9 @@ int dw_mci_probe(struct dw_mci *host) mci_writel(host, CLKSRC, 0); tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host); - dw_mci_card_workqueue = alloc_workqueue("dw-mci-card", + host->card_workqueue = alloc_workqueue("dw-mci-card", WQ_MEM_RECLAIM | WQ_NON_REENTRANT, 1); - if (!dw_mci_card_workqueue) + if (!host->card_workqueue) goto err_dmaunmap; INIT_WORK(&host->card_work, dw_mci_work_routine_card); ret = request_irq(host->irq, dw_mci_interrupt, host->irq_flags, "dw-mci", host); @@ -2085,7 +2083,7 @@ err_init_slot: free_irq(host->irq, host); err_workqueue: - destroy_workqueue(dw_mci_card_workqueue); + destroy_workqueue(host->card_workqueue); err_dmaunmap: if (host->use_dma && host->dma_ops->exit) @@ -2119,7 +2117,7 @@ void dw_mci_remove(struct dw_mci *host) mci_writel(host, CLKSRC, 0); free_irq(host->irq, host); - destroy_workqueue(dw_mci_card_workqueue); + destroy_workqueue(host->card_workqueue); dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); if (host->use_dma && host->dma_ops->exit) diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 8f66e28f5a0f..7a7ebd367cfd 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -125,6 +125,7 @@ struct dw_mci { struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; + struct workqueue_struct *card_workqueue; /* DMA interface members*/ int use_dma; -- cgit v1.2.3 From fa5501890d8974301042e0202d342a6cbe8609f4 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 9 May 2012 16:15:26 +0200 Subject: mmc: core: Prevent eMMC VCC supply to be cut from late init For eMMC cards that has been initialized from a bootloader, the VCC voltage supply must not be cut in an uncontrolled manner, without first sending SLEEP or POWEROFF_NOTIFY. The regulator_init_complete late initcall, may cut the VCC regulator if it's reference counter is zero. To be able to prevent the regulator from being cut, mmc_start_host, which should execute at device init and thus before late init, calls mmc_power_up. Then the host driver is able to increase the reference to the regulator. Signed-off-by: Ulf Hansson Reviewed-by: Mark Brown Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index ba821fe70bca..0b6141d29dbd 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -42,6 +42,7 @@ #include "sdio_ops.h" static struct workqueue_struct *workqueue; +static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; /* * Enabling software CRCs on the data blocks can be a significant (30%) @@ -1157,6 +1158,9 @@ static void mmc_power_up(struct mmc_host *host) { int bit; + if (host->ios.power_mode == MMC_POWER_ON) + return; + mmc_host_clk_hold(host); /* If ocr is set, we use it */ @@ -1199,6 +1203,10 @@ static void mmc_power_up(struct mmc_host *host) void mmc_power_off(struct mmc_host *host) { int err = 0; + + if (host->ios.power_mode == MMC_POWER_OFF) + return; + mmc_host_clk_hold(host); host->ios.clock = 0; @@ -2005,7 +2013,6 @@ EXPORT_SYMBOL(mmc_detect_card_removed); void mmc_rescan(struct work_struct *work) { - static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; struct mmc_host *host = container_of(work, struct mmc_host, detect.work); int i; @@ -2044,8 +2051,12 @@ void mmc_rescan(struct work_struct *work) */ mmc_bus_put(host); - if (host->ops->get_cd && host->ops->get_cd(host) == 0) + if (host->ops->get_cd && host->ops->get_cd(host) == 0) { + mmc_claim_host(host); + mmc_power_off(host); + mmc_release_host(host); goto out; + } mmc_claim_host(host); for (i = 0; i < ARRAY_SIZE(freqs); i++) { @@ -2063,7 +2074,8 @@ void mmc_rescan(struct work_struct *work) void mmc_start_host(struct mmc_host *host) { - mmc_power_off(host); + host->f_init = max(freqs[0], host->f_min); + mmc_power_up(host); mmc_detect_change(host, 0); } -- cgit v1.2.3 From 1c02f000e78347aa51822feb189fcb0d90273958 Mon Sep 17 00:00:00 2001 From: Philippe De Swert Date: Wed, 11 Apr 2012 23:31:45 +0300 Subject: mmc: card: Avoid null pointer dereference After the null check on md the code jumped to cmd_done, which then will dereference md in mmc_blk_put. This patch avoids the possible null pointer dereference in that case. Signed-off-by: Philippe De Swert Reviewed-by: Namjae Jeon Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index dabec556ebb8..91cda7551a60 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -384,7 +384,7 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev, md = mmc_blk_get(bdev->bd_disk); if (!md) { err = -EINVAL; - goto cmd_done; + goto cmd_err; } card = md->queue.card; @@ -483,6 +483,7 @@ cmd_rel_host: cmd_done: mmc_blk_put(md); +cmd_err: kfree(idata->buf); kfree(idata); return err; -- cgit v1.2.3 From f6f44590f231cdf914ce740f3a53a6b815bf4767 Mon Sep 17 00:00:00 2001 From: Philippe De Swert Date: Wed, 11 Apr 2012 23:32:05 +0300 Subject: mmc: core: Remove dead code bus_width is passed to the function and when 0 (MMC_BUS_WIDTH_1) will cause the function to return. So in in the second test it definitely is different from 0, and the third test is redundant. Signed-off-by: Philippe De Swert Reviewed-by: Namjae Jeon Acked-by: Philip Rakity Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 163046030773..2f0e11c9fd67 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -539,14 +539,10 @@ static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) err = mmc_get_ext_csd(card, &bw_ext_csd); if (err || bw_ext_csd == NULL) { - if (bus_width != MMC_BUS_WIDTH_1) - err = -EINVAL; + err = -EINVAL; goto out; } - if (bus_width == MMC_BUS_WIDTH_1) - goto out; - /* only compare read only fields */ err = !((card->ext_csd.raw_partition_support == bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) && -- cgit v1.2.3 From b01a4f1ce2cde9acd97ce5c06e35bc9c1eacded7 Mon Sep 17 00:00:00 2001 From: Venkatraman S Date: Tue, 8 May 2012 17:05:33 +0530 Subject: mmc: omap: convert to per instance workqueue Currently, a global mmc_omap_wq is created for all instances of omap hosts, which can lead to races and doesn't lend itself to unload the module cleanly. Instead, create per instance workqueue and remove the common workqueue. Signed-off-by: Venkatraman S Acked-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 887c0e598cf3..2d7628eee3d3 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -169,11 +169,11 @@ struct mmc_omap_host { struct timer_list clk_timer; spinlock_t clk_lock; /* for changing enabled state */ unsigned int fclk_enabled:1; + struct workqueue_struct *mmc_omap_wq; struct omap_mmc_platform_data *pdata; }; -static struct workqueue_struct *mmc_omap_wq; static void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot) { @@ -291,7 +291,7 @@ static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled) host->next_slot = new_slot; host->mmc = new_slot->mmc; spin_unlock_irqrestore(&host->slot_lock, flags); - queue_work(mmc_omap_wq, &host->slot_release_work); + queue_work(host->mmc_omap_wq, &host->slot_release_work); return; } @@ -459,7 +459,7 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) } host->stop_data = data; - queue_work(mmc_omap_wq, &host->send_stop_work); + queue_work(host->mmc_omap_wq, &host->send_stop_work); } static void @@ -639,7 +639,7 @@ mmc_omap_cmd_timer(unsigned long data) OMAP_MMC_WRITE(host, IE, 0); disable_irq(host->irq); host->abort = 1; - queue_work(mmc_omap_wq, &host->cmd_abort_work); + queue_work(host->mmc_omap_wq, &host->cmd_abort_work); } spin_unlock_irqrestore(&host->slot_lock, flags); } @@ -828,7 +828,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) host->abort = 1; OMAP_MMC_WRITE(host, IE, 0); disable_irq_nosync(host->irq); - queue_work(mmc_omap_wq, &host->cmd_abort_work); + queue_work(host->mmc_omap_wq, &host->cmd_abort_work); return IRQ_HANDLED; } @@ -1389,7 +1389,7 @@ static void mmc_omap_remove_slot(struct mmc_omap_slot *slot) tasklet_kill(&slot->cover_tasklet); del_timer_sync(&slot->cover_timer); - flush_workqueue(mmc_omap_wq); + flush_workqueue(slot->host->mmc_omap_wq); mmc_remove_host(mmc); mmc_free_host(mmc); @@ -1497,6 +1497,10 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->reg_shift = (cpu_is_omap7xx() ? 1 : 2); + host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0); + if (!host->mmc_omap_wq) + goto err_plat_cleanup; + return 0; err_plat_cleanup: @@ -1542,6 +1546,7 @@ static int mmc_omap_remove(struct platform_device *pdev) iounmap(host->virt_base); release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); + destroy_workqueue(host->mmc_omap_wq); kfree(host); @@ -1610,22 +1615,12 @@ static struct platform_driver mmc_omap_driver = { static int __init mmc_omap_init(void) { - int ret; - - mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0); - if (!mmc_omap_wq) - return -ENOMEM; - - ret = platform_driver_probe(&mmc_omap_driver, mmc_omap_probe); - if (ret) - destroy_workqueue(mmc_omap_wq); - return ret; + return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe); } static void __exit mmc_omap_exit(void) { platform_driver_unregister(&mmc_omap_driver); - destroy_workqueue(mmc_omap_wq); } module_init(mmc_omap_init); -- cgit v1.2.3 From b6e0703bbf0121cd6440277a0604d860f5734b2c Mon Sep 17 00:00:00 2001 From: Venkatraman S Date: Tue, 8 May 2012 17:05:34 +0530 Subject: mmc: omap: make it behave well as a module Use proper __devinit and __devexit annotation for driver functions. Instantiate the probe function for driver_ops instead of a probe in the register function. Signed-off-by: Venkatraman S Acked-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 2d7628eee3d3..0056bd8acc83 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1395,7 +1395,7 @@ static void mmc_omap_remove_slot(struct mmc_omap_slot *slot) mmc_free_host(mmc); } -static int __init mmc_omap_probe(struct platform_device *pdev) +static int __devinit mmc_omap_probe(struct platform_device *pdev) { struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; struct mmc_omap_host *host = NULL; @@ -1522,7 +1522,7 @@ err_free_mem_region: return ret; } -static int mmc_omap_remove(struct platform_device *pdev) +static int __devexit mmc_omap_remove(struct platform_device *pdev) { struct mmc_omap_host *host = platform_get_drvdata(pdev); int i; @@ -1604,7 +1604,8 @@ static int mmc_omap_resume(struct platform_device *pdev) #endif static struct platform_driver mmc_omap_driver = { - .remove = mmc_omap_remove, + .probe = mmc_omap_probe, + .remove = __devexit_p(mmc_omap_remove), .suspend = mmc_omap_suspend, .resume = mmc_omap_resume, .driver = { @@ -1615,7 +1616,7 @@ static struct platform_driver mmc_omap_driver = { static int __init mmc_omap_init(void) { - return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe); + return platform_driver_register(&mmc_omap_driver); } static void __exit mmc_omap_exit(void) -- cgit v1.2.3 From 680f1b5b216af1ae051bdf237e3ea47ba9124876 Mon Sep 17 00:00:00 2001 From: Venkatraman S Date: Tue, 8 May 2012 17:05:35 +0530 Subject: mmc: omap: convert to module_platform_driver Get rid of boilerplate code by using module_platform_driver macro, no functional changes. Signed-off-by: Venkatraman S Acked-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 0056bd8acc83..552196c764d4 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1614,19 +1614,7 @@ static struct platform_driver mmc_omap_driver = { }, }; -static int __init mmc_omap_init(void) -{ - return platform_driver_register(&mmc_omap_driver); -} - -static void __exit mmc_omap_exit(void) -{ - platform_driver_unregister(&mmc_omap_driver); -} - -module_init(mmc_omap_init); -module_exit(mmc_omap_exit); - +module_platform_driver(mmc_omap_driver); MODULE_DESCRIPTION("OMAP Multimedia Card driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" DRIVER_NAME); -- cgit v1.2.3 From 705ad0472bd55fa38e6c594b2d6318c31e86068a Mon Sep 17 00:00:00 2001 From: Kyoungil Kim Date: Mon, 14 May 2012 17:38:48 +0900 Subject: mmc: dw_mmc: Fixed sdio interrupt mask bit setting bug The sdio interrupt mask bits are arranged in [31:16]. (1 << SDMMC_INT_SDIO(slot->id))) does 16 bits left shift twice. So this patch changes to do 16 bits left shift only one time. Signed-off-by: Kyoungil Kim Acked-by: Shashidhar Hiremath Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 1532357787cb..9bbf45f8c538 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -857,10 +857,10 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) int_mask = mci_readl(host, INTMASK); if (enb) { mci_writel(host, INTMASK, - (int_mask | (1 << SDMMC_INT_SDIO(slot->id)))); + (int_mask | SDMMC_INT_SDIO(slot->id))); } else { mci_writel(host, INTMASK, - (int_mask & ~(1 << SDMMC_INT_SDIO(slot->id)))); + (int_mask & ~SDMMC_INT_SDIO(slot->id))); } } -- cgit v1.2.3 From 7a90dcc2d7ceb64bb37044a8d2ee462b936ddf73 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 16 May 2012 15:25:58 +0200 Subject: mmc: atmel-mci: the r/w proof capability lack was not well managed First mci IPs (mainly on rm9200 and 9261) don't have the r/w proof capability. The driver didn't work correctly without this capability in PDC mode because of the double buffer switch which is too slow even if we stop the transfer to perform this switch. Signed-off-by: Ludovic Desroches Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 92 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 78 insertions(+), 14 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index e94476beca18..6f56ef025ab5 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -91,6 +91,11 @@ struct atmel_mci_dma { * @regs: Pointer to MMIO registers. * @sg: Scatterlist entry currently being processed by PIO or PDC code. * @pio_offset: Offset into the current scatterlist entry. + * @buffer: Buffer used if we don't have the r/w proof capability. We + * don't have the time to switch pdc buffers so we have to use only + * one buffer for the full transaction. + * @buf_size: size of the buffer. + * @phys_buf_addr: buffer address needed for pdc. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, * or NULL if the controller is idle. @@ -166,6 +171,9 @@ struct atmel_mci { struct scatterlist *sg; unsigned int pio_offset; + unsigned int *buffer; + unsigned int buf_size; + dma_addr_t buf_phys_addr; struct atmel_mci_slot *cur_slot; struct mmc_request *mrq; @@ -480,6 +488,11 @@ err: dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); } +static inline unsigned int atmci_get_version(struct atmel_mci *host) +{ + return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; +} + static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, unsigned int ns) { @@ -603,6 +616,7 @@ static void atmci_pdc_set_single_buf(struct atmel_mci *host, enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb) { u32 pointer_reg, counter_reg; + unsigned int buf_size; if (dir == XFER_RECEIVE) { pointer_reg = ATMEL_PDC_RPR; @@ -617,8 +631,15 @@ static void atmci_pdc_set_single_buf(struct atmel_mci *host, counter_reg += ATMEL_PDC_SCND_BUF_OFF; } - atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); - if (host->data_size <= sg_dma_len(host->sg)) { + if (!host->caps.has_rwproof) { + buf_size = host->buf_size; + atmci_writel(host, pointer_reg, host->buf_phys_addr); + } else { + buf_size = sg_dma_len(host->sg); + atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); + } + + if (host->data_size <= buf_size) { if (host->data_size & 0x3) { /* If size is different from modulo 4, transfer bytes */ atmci_writel(host, counter_reg, host->data_size); @@ -670,7 +691,15 @@ static void atmci_pdc_cleanup(struct atmel_mci *host) */ static void atmci_pdc_complete(struct atmel_mci *host) { + int transfer_size = host->data->blocks * host->data->blksz; + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); + + if ((!host->caps.has_rwproof) + && (host->data->flags & MMC_DATA_READ)) + sg_copy_from_buffer(host->data->sg, host->data->sg_len, + host->buffer, transfer_size); + atmci_pdc_cleanup(host); /* @@ -818,6 +847,12 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) /* Configure PDC */ host->data_size = data->blocks * data->blksz; sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir); + + if ((!host->caps.has_rwproof) + && (host->data->flags & MMC_DATA_WRITE)) + sg_copy_to_buffer(host->data->sg, host->data->sg_len, + host->buffer, host->data_size); + if (host->data_size) atmci_pdc_set_both_buf(host, ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT)); @@ -1877,13 +1912,26 @@ static int __init atmci_init_slot(struct atmel_mci *host, mmc->caps |= MMC_CAP_SDIO_IRQ; if (host->caps.has_highspeed) mmc->caps |= MMC_CAP_SD_HIGHSPEED; - if (slot_data->bus_width >= 4) + /* + * Without the read/write proof capability, it is strongly suggested to + * use only one bit for data to prevent fifo underruns and overruns + * which will corrupt data. + */ + if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) mmc->caps |= MMC_CAP_4_BIT_DATA; - mmc->max_segs = 64; - mmc->max_req_size = 32768 * 512; - mmc->max_blk_size = 32768; - mmc->max_blk_count = 512; + if (atmci_get_version(host) < 0x200) { + mmc->max_segs = 256; + mmc->max_blk_size = 4095; + mmc->max_blk_count = 256; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs; + } else { + mmc->max_segs = 64; + mmc->max_req_size = 32768 * 512; + mmc->max_blk_size = 32768; + mmc->max_blk_count = 512; + } /* Assume card is present initially */ set_bit(ATMCI_CARD_PRESENT, &slot->flags); @@ -2007,11 +2055,6 @@ static bool atmci_configure_dma(struct atmel_mci *host) } } -static inline unsigned int atmci_get_version(struct atmel_mci *host) -{ - return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; -} - /* * HSMCI (High Speed MCI) module is not fully compatible with MCI module. * HSMCI provides DMA support and a new config register but no more supports @@ -2138,14 +2181,20 @@ static int __init atmci_probe(struct platform_device *pdev) if (pdata->slot[0].bus_width) { ret = atmci_init_slot(host, &pdata->slot[0], 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA); - if (!ret) + if (!ret) { nr_slots++; + host->buf_size = host->slot[0]->mmc->max_req_size; + } } if (pdata->slot[1].bus_width) { ret = atmci_init_slot(host, &pdata->slot[1], 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB); - if (!ret) + if (!ret) { nr_slots++; + if (host->slot[1]->mmc->max_req_size > host->buf_size) + host->buf_size = + host->slot[1]->mmc->max_req_size; + } } if (!nr_slots) { @@ -2153,6 +2202,17 @@ static int __init atmci_probe(struct platform_device *pdev) goto err_init_slot; } + if (!host->caps.has_rwproof) { + host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size, + &host->buf_phys_addr, + GFP_KERNEL); + if (!host->buffer) { + ret = -ENOMEM; + dev_err(&pdev->dev, "buffer allocation failed\n"); + goto err_init_slot; + } + } + dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); @@ -2179,6 +2239,10 @@ static int __exit atmci_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); + if (host->buffer) + dma_free_coherent(&pdev->dev, host->buf_size, + host->buffer, host->buf_phys_addr); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i]) atmci_cleanup_slot(host->slot[i], i); -- cgit v1.2.3 From f51775471ac6155d3bb8494dcb5c0a13a84f611e Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 16 May 2012 15:25:59 +0200 Subject: mmc: atmel-mci: change the state machine for compatibility with old IP The state machine use in atmel-mci can't work with old IP versions (< 0x200). This patch allows to have a common state machine for all versions in order to remove at91-mci driver only used for old versions. Signed-off-by: Ludovic Desroches Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 278 +++++++++++++++++++++++++------------------ 1 file changed, 162 insertions(+), 116 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 6f56ef025ab5..1baaaebbeda8 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -45,19 +45,19 @@ #define ATMCI_DMA_THRESHOLD 16 enum { - EVENT_CMD_COMPLETE = 0, + EVENT_CMD_RDY = 0, EVENT_XFER_COMPLETE, - EVENT_DATA_COMPLETE, + EVENT_NOTBUSY, EVENT_DATA_ERROR, }; enum atmel_mci_state { STATE_IDLE = 0, STATE_SENDING_CMD, - STATE_SENDING_DATA, - STATE_DATA_BUSY, + STATE_DATA_XFER, + STATE_WAITING_NOTBUSY, STATE_SENDING_STOP, - STATE_DATA_ERROR, + STATE_END_REQUEST, }; enum atmci_xfer_dir { @@ -709,7 +709,6 @@ static void atmci_pdc_complete(struct atmel_mci *host) if (host->data) { atmci_set_pending(host, EVENT_XFER_COMPLETE); tasklet_schedule(&host->tasklet); - atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } } @@ -835,7 +834,7 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) iflags |= ATMCI_ENDRX | ATMCI_RXBUFF; } else { dir = DMA_TO_DEVICE; - iflags |= ATMCI_ENDTX | ATMCI_TXBUFE; + iflags |= ATMCI_ENDTX | ATMCI_TXBUFE | ATMCI_BLKE; } /* Set BLKLEN */ @@ -975,8 +974,7 @@ static void atmci_stop_transfer(struct atmel_mci *host) */ static void atmci_stop_transfer_pdc(struct atmel_mci *host) { - atmci_set_pending(host, EVENT_XFER_COMPLETE); - atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); } static void atmci_stop_transfer_dma(struct atmel_mci *host) @@ -1012,6 +1010,7 @@ static void atmci_start_request(struct atmel_mci *host, host->pending_events = 0; host->completed_events = 0; + host->cmd_status = 0; host->data_status = 0; if (host->need_reset) { @@ -1029,7 +1028,7 @@ static void atmci_start_request(struct atmel_mci *host, iflags = atmci_readl(host, ATMCI_IMR); if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) - dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", + dev_dbg(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", iflags); if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { @@ -1367,19 +1366,6 @@ static void atmci_command_complete(struct atmel_mci *host, cmd->error = -EIO; else cmd->error = 0; - - if (cmd->error) { - dev_dbg(&host->pdev->dev, - "command error: status=0x%08x\n", status); - - if (cmd->data) { - host->stop_transfer(host); - host->data = NULL; - atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY - | ATMCI_TXRDY | ATMCI_RXRDY - | ATMCI_DATA_ERROR_FLAGS); - } - } } static void atmci_detect_change(unsigned long data) @@ -1442,23 +1428,21 @@ static void atmci_detect_change(unsigned long data) break; case STATE_SENDING_CMD: mrq->cmd->error = -ENOMEDIUM; - if (!mrq->data) - break; - /* fall through */ - case STATE_SENDING_DATA: + if (mrq->data) + host->stop_transfer(host); + break; + case STATE_DATA_XFER: mrq->data->error = -ENOMEDIUM; host->stop_transfer(host); break; - case STATE_DATA_BUSY: - case STATE_DATA_ERROR: - if (mrq->data->error == -EINPROGRESS) - mrq->data->error = -ENOMEDIUM; - if (!mrq->stop) - break; - /* fall through */ + case STATE_WAITING_NOTBUSY: + mrq->data->error = -ENOMEDIUM; + break; case STATE_SENDING_STOP: mrq->stop->error = -ENOMEDIUM; break; + case STATE_END_REQUEST: + break; } atmci_request_end(host, mrq); @@ -1486,7 +1470,6 @@ static void atmci_tasklet_func(unsigned long priv) struct atmel_mci *host = (struct atmel_mci *)priv; struct mmc_request *mrq = host->mrq; struct mmc_data *data = host->data; - struct mmc_command *cmd = host->cmd; enum atmel_mci_state state = host->state; enum atmel_mci_state prev_state; u32 status; @@ -1508,101 +1491,164 @@ static void atmci_tasklet_func(unsigned long priv) break; case STATE_SENDING_CMD: + /* + * Command has been sent, we are waiting for command + * ready. Then we have three next states possible: + * END_REQUEST by default, WAITING_NOTBUSY if it's a + * command needing it or DATA_XFER if there is data. + */ if (!atmci_test_and_clear_pending(host, - EVENT_CMD_COMPLETE)) + EVENT_CMD_RDY)) break; host->cmd = NULL; - atmci_set_completed(host, EVENT_CMD_COMPLETE); + atmci_set_completed(host, EVENT_CMD_RDY); atmci_command_complete(host, mrq->cmd); - if (!mrq->data || cmd->error) { - atmci_request_end(host, host->mrq); - goto unlock; - } + if (mrq->data) { + /* + * If there is a command error don't start + * data transfer. + */ + if (mrq->cmd->error) { + host->stop_transfer(host); + host->data = NULL; + atmci_writel(host, ATMCI_IDR, + ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; + } else + state = STATE_DATA_XFER; + } else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) { + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } else + state = STATE_END_REQUEST; - prev_state = state = STATE_SENDING_DATA; - /* fall through */ + break; - case STATE_SENDING_DATA: + case STATE_DATA_XFER: if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { - host->stop_transfer(host); - if (data->stop) - atmci_send_stop_cmd(host, data); - state = STATE_DATA_ERROR; + atmci_set_completed(host, EVENT_DATA_ERROR); + state = STATE_END_REQUEST; break; } + /* + * A data transfer is in progress. The event expected + * to move to the next state depends of data transfer + * type (PDC or DMA). Once transfer done we can move + * to the next step which is WAITING_NOTBUSY in write + * case and directly SENDING_STOP in read case. + */ if (!atmci_test_and_clear_pending(host, EVENT_XFER_COMPLETE)) break; atmci_set_completed(host, EVENT_XFER_COMPLETE); - prev_state = state = STATE_DATA_BUSY; - /* fall through */ - case STATE_DATA_BUSY: - if (!atmci_test_and_clear_pending(host, - EVENT_DATA_COMPLETE)) - break; - - host->data = NULL; - atmci_set_completed(host, EVENT_DATA_COMPLETE); - status = host->data_status; - if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { - if (status & ATMCI_DTOE) { - dev_dbg(&host->pdev->dev, - "data timeout error\n"); - data->error = -ETIMEDOUT; - } else if (status & ATMCI_DCRCE) { - dev_dbg(&host->pdev->dev, - "data CRC error\n"); - data->error = -EILSEQ; - } else { - dev_dbg(&host->pdev->dev, - "data FIFO error (status=%08x)\n", - status); - data->error = -EIO; - } + if (host->data->flags & MMC_DATA_WRITE) { + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } else if (host->mrq->stop) { + atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); + atmci_send_stop_cmd(host, data); + state = STATE_SENDING_STOP; } else { + host->data = NULL; data->bytes_xfered = data->blocks * data->blksz; data->error = 0; - atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; } + break; - if (!data->stop) { - atmci_request_end(host, host->mrq); - goto unlock; - } + case STATE_WAITING_NOTBUSY: + /* + * We can be in the state for two reasons: a command + * requiring waiting not busy signal (stop command + * included) or a write operation. In the latest case, + * we need to send a stop command. + */ + if (!atmci_test_and_clear_pending(host, + EVENT_NOTBUSY)) + break; - prev_state = state = STATE_SENDING_STOP; - if (!data->error) - atmci_send_stop_cmd(host, data); - /* fall through */ + atmci_set_completed(host, EVENT_NOTBUSY); + + if (host->data) { + /* + * For some commands such as CMD53, even if + * there is data transfer, there is no stop + * command to send. + */ + if (host->mrq->stop) { + atmci_writel(host, ATMCI_IER, + ATMCI_CMDRDY); + atmci_send_stop_cmd(host, data); + state = STATE_SENDING_STOP; + } else { + host->data = NULL; + data->bytes_xfered = data->blocks + * data->blksz; + data->error = 0; + state = STATE_END_REQUEST; + } + } else + state = STATE_END_REQUEST; + break; case STATE_SENDING_STOP: + /* + * In this state, it is important to set host->data to + * NULL (which is tested in the waiting notbusy state) + * in order to go to the end request state instead of + * sending stop again. + */ if (!atmci_test_and_clear_pending(host, - EVENT_CMD_COMPLETE)) + EVENT_CMD_RDY)) break; host->cmd = NULL; + host->data = NULL; + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; atmci_command_complete(host, mrq->stop); - atmci_request_end(host, host->mrq); - goto unlock; + if (mrq->stop->error) { + host->stop_transfer(host); + atmci_writel(host, ATMCI_IDR, + ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; + } else { + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } + break; - case STATE_DATA_ERROR: - if (!atmci_test_and_clear_pending(host, - EVENT_XFER_COMPLETE)) - break; + case STATE_END_REQUEST: + atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + status = host->data_status; + if (unlikely(status)) { + host->stop_transfer(host); + host->data = NULL; + if (status & ATMCI_DTOE) { + data->error = -ETIMEDOUT; + } else if (status & ATMCI_DCRCE) { + data->error = -EILSEQ; + } else { + data->error = -EIO; + } + } - state = STATE_DATA_BUSY; + atmci_request_end(host, host->mrq); + state = STATE_IDLE; break; } } while (state != prev_state); host->state = state; -unlock: spin_unlock(&host->lock); } @@ -1655,9 +1701,6 @@ static void atmci_read_data_pio(struct atmel_mci *host) | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; data->bytes_xfered += nbytes; - smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); return; } } while (status & ATMCI_RXRDY); @@ -1726,9 +1769,6 @@ static void atmci_write_data_pio(struct atmel_mci *host) | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; data->bytes_xfered += nbytes; - smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); return; } } while (status & ATMCI_TXRDY); @@ -1746,16 +1786,6 @@ done: atmci_set_pending(host, EVENT_XFER_COMPLETE); } -static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) -{ - atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); - - host->cmd_status = status; - smp_wmb(); - atmci_set_pending(host, EVENT_CMD_COMPLETE); - tasklet_schedule(&host->tasklet); -} - static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status) { int i; @@ -1784,8 +1814,9 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) if (pending & ATMCI_DATA_ERROR_FLAGS) { atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS - | ATMCI_RXRDY | ATMCI_TXRDY); - pending &= atmci_readl(host, ATMCI_IMR); + | ATMCI_RXRDY | ATMCI_TXRDY + | ATMCI_ENDRX | ATMCI_ENDTX + | ATMCI_RXBUFF | ATMCI_TXBUFE); host->data_status = status; smp_wmb(); @@ -1843,23 +1874,38 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) } } + /* + * First mci IPs, so mainly the ones having pdc, have some + * issues with the notbusy signal. You can't get it after + * data transmission if you have not sent a stop command. + * The appropriate workaround is to use the BLKE signal. + */ + if (pending & ATMCI_BLKE) { + atmci_writel(host, ATMCI_IDR, ATMCI_BLKE); + smp_wmb(); + atmci_set_pending(host, EVENT_NOTBUSY); + tasklet_schedule(&host->tasklet); + } if (pending & ATMCI_NOTBUSY) { - atmci_writel(host, ATMCI_IDR, - ATMCI_DATA_ERROR_FLAGS | ATMCI_NOTBUSY); - if (!host->data_status) - host->data_status = status; + atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY); smp_wmb(); - atmci_set_pending(host, EVENT_DATA_COMPLETE); + atmci_set_pending(host, EVENT_NOTBUSY); tasklet_schedule(&host->tasklet); } + if (pending & ATMCI_RXRDY) atmci_read_data_pio(host); if (pending & ATMCI_TXRDY) atmci_write_data_pio(host); - if (pending & ATMCI_CMDRDY) - atmci_cmd_interrupt(host, status); + if (pending & ATMCI_CMDRDY) { + atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); + host->cmd_status = status; + smp_wmb(); + atmci_set_pending(host, EVENT_CMD_RDY); + tasklet_schedule(&host->tasklet); + } if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) atmci_sdio_interrupt(host, status); -- cgit v1.2.3 From 24011f346471f7636f0ba6ffe2064fdd1a091daa Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 16 May 2012 15:26:00 +0200 Subject: mmc: atmel-mci: add support for version lower than v2xx Fix mci IP bugs and endianness issue. Signed-off-by: Ludovic Desroches Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 62 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 58 insertions(+), 4 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 1baaaebbeda8..5fe83008b746 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -78,6 +78,9 @@ struct atmel_mci_caps { bool has_highspeed; bool has_rwproof; bool has_odd_clk_div; + bool has_bad_data_ordering; + bool need_reset_after_xfer; + bool need_blksz_mul_4; }; struct atmel_mci_dma { @@ -121,6 +124,7 @@ struct atmel_mci_dma { * @queue: List of slots waiting for access to the controller. * @need_clock_update: Update the clock rate before the next request. * @need_reset: Reset controller before next request. + * @timer: Timer to balance the data timeout error flag which cannot rise. * @mode_reg: Value of the MR register. * @cfg_reg: Value of the CFG register. * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus @@ -197,6 +201,7 @@ struct atmel_mci { bool need_clock_update; bool need_reset; + struct timer_list timer; u32 mode_reg; u32 cfg_reg; unsigned long bus_hz; @@ -493,6 +498,27 @@ static inline unsigned int atmci_get_version(struct atmel_mci *host) return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; } +static void atmci_timeout_timer(unsigned long data) +{ + struct atmel_mci *host; + + host = (struct atmel_mci *)data; + + dev_dbg(&host->pdev->dev, "software timeout\n"); + + if (host->mrq->cmd->data) { + host->mrq->cmd->data->error = -ETIMEDOUT; + host->data = NULL; + } else { + host->mrq->cmd->error = -ETIMEDOUT; + host->cmd = NULL; + } + host->need_reset = 1; + host->state = STATE_END_REQUEST; + smp_wmb(); + tasklet_schedule(&host->tasklet); +} + static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, unsigned int ns) { @@ -692,13 +718,18 @@ static void atmci_pdc_cleanup(struct atmel_mci *host) static void atmci_pdc_complete(struct atmel_mci *host) { int transfer_size = host->data->blocks * host->data->blksz; + int i; atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); if ((!host->caps.has_rwproof) - && (host->data->flags & MMC_DATA_READ)) + && (host->data->flags & MMC_DATA_READ)) { + if (host->caps.has_bad_data_ordering) + for (i = 0; i < transfer_size; i++) + host->buffer[i] = swab32(host->buffer[i]); sg_copy_from_buffer(host->data->sg, host->data->sg_len, host->buffer, transfer_size); + } atmci_pdc_cleanup(host); @@ -819,6 +850,7 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) u32 iflags, tmp; unsigned int sg_len; enum dma_data_direction dir; + int i; data->error = -EINPROGRESS; @@ -848,9 +880,13 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir); if ((!host->caps.has_rwproof) - && (host->data->flags & MMC_DATA_WRITE)) + && (host->data->flags & MMC_DATA_WRITE)) { sg_copy_to_buffer(host->data->sg, host->data->sg_len, host->buffer, host->data_size); + if (host->caps.has_bad_data_ordering) + for (i = 0; i < host->data_size; i++) + host->buffer[i] = swab32(host->buffer[i]); + } if (host->data_size) atmci_pdc_set_both_buf(host, @@ -1013,7 +1049,7 @@ static void atmci_start_request(struct atmel_mci *host, host->cmd_status = 0; host->data_status = 0; - if (host->need_reset) { + if (host->need_reset || host->caps.need_reset_after_xfer) { iflags = atmci_readl(host, ATMCI_IMR); iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB); atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); @@ -1077,6 +1113,8 @@ static void atmci_start_request(struct atmel_mci *host, * prepared yet.) */ atmci_writel(host, ATMCI_IER, iflags); + + mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000)); } static void atmci_queue_request(struct atmel_mci *host, @@ -1342,6 +1380,8 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) host->state = STATE_IDLE; } + del_timer(&host->timer); + spin_unlock(&host->lock); mmc_request_done(prev_mmc, mrq); spin_lock(&host->lock); @@ -1364,7 +1404,12 @@ static void atmci_command_complete(struct atmel_mci *host, cmd->error = -EILSEQ; else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE)) cmd->error = -EIO; - else + else if (host->mrq->data && (host->mrq->data->blksz & 3)) { + if (host->caps.need_blksz_mul_4) { + cmd->error = -EINVAL; + host->need_reset = 1; + } + } else cmd->error = 0; } @@ -2121,6 +2166,9 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_highspeed = 0; host->caps.has_rwproof = 0; host->caps.has_odd_clk_div = 0; + host->caps.has_bad_data_ordering = 1; + host->caps.need_reset_after_xfer = 1; + host->caps.need_blksz_mul_4 = 1; /* keep only major version number */ switch (version & 0xf00) { @@ -2140,7 +2188,11 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_highspeed = 1; case 0x200: host->caps.has_rwproof = 1; + host->caps.need_blksz_mul_4 = 0; case 0x100: + host->caps.has_bad_data_ordering = 0; + host->caps.need_reset_after_xfer = 0; + case 0x0: break; default: host->caps.has_pdc = 0; @@ -2259,6 +2311,8 @@ static int __init atmci_probe(struct platform_device *pdev) } } + setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); + dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); -- cgit v1.2.3 From 6801c41a77123712accfde898820972a1f6fc117 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 16 May 2012 15:26:01 +0200 Subject: mmc: atmel-mci: add debug logs Signed-off-by: Ludovic Desroches Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 5fe83008b746..420aca642b14 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -630,6 +630,7 @@ static void atmci_send_command(struct atmel_mci *host, static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) { + dev_dbg(&host->pdev->dev, "send stop command\n"); atmci_send_command(host, data->stop, host->stop_cmdr); atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); } @@ -738,6 +739,8 @@ static void atmci_pdc_complete(struct atmel_mci *host) * to send the stop command or waiting for NBUSY in this case. */ if (host->data) { + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); tasklet_schedule(&host->tasklet); } @@ -775,6 +778,8 @@ static void atmci_dma_complete(void *arg) * to send the stop command or waiting for NBUSY in this case. */ if (data) { + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); tasklet_schedule(&host->tasklet); @@ -1001,6 +1006,8 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) static void atmci_stop_transfer(struct atmel_mci *host) { + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } @@ -1022,6 +1029,8 @@ static void atmci_stop_transfer_dma(struct atmel_mci *host) atmci_dma_cleanup(host); } else { /* Data transfer was stopped by the interrupt handler */ + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } @@ -1049,6 +1058,8 @@ static void atmci_start_request(struct atmel_mci *host, host->cmd_status = 0; host->data_status = 0; + dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode); + if (host->need_reset || host->caps.need_reset_after_xfer) { iflags = atmci_readl(host, ATMCI_IMR); iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB); @@ -1129,6 +1140,7 @@ static void atmci_queue_request(struct atmel_mci *host, host->state = STATE_SENDING_CMD; atmci_start_request(host, slot); } else { + dev_dbg(&host->pdev->dev, "queue request\n"); list_add_tail(&slot->queue_node, &host->queue); } spin_unlock_bh(&host->lock); @@ -1141,6 +1153,7 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) struct mmc_data *data; WARN_ON(slot->mrq); + dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode); /* * We may "know" the card is gone even though there's still an @@ -1530,6 +1543,7 @@ static void atmci_tasklet_func(unsigned long priv) do { prev_state = state; + dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state); switch (state) { case STATE_IDLE: @@ -1542,14 +1556,18 @@ static void atmci_tasklet_func(unsigned long priv) * END_REQUEST by default, WAITING_NOTBUSY if it's a * command needing it or DATA_XFER if there is data. */ + dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n"); if (!atmci_test_and_clear_pending(host, EVENT_CMD_RDY)) break; + dev_dbg(&host->pdev->dev, "set completed cmd ready\n"); host->cmd = NULL; atmci_set_completed(host, EVENT_CMD_RDY); atmci_command_complete(host, mrq->cmd); if (mrq->data) { + dev_dbg(&host->pdev->dev, + "command with data transfer"); /* * If there is a command error don't start * data transfer. @@ -1564,6 +1582,8 @@ static void atmci_tasklet_func(unsigned long priv) } else state = STATE_DATA_XFER; } else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) { + dev_dbg(&host->pdev->dev, + "command response need waiting notbusy"); atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); state = STATE_WAITING_NOTBUSY; } else @@ -1574,6 +1594,7 @@ static void atmci_tasklet_func(unsigned long priv) case STATE_DATA_XFER: if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { + dev_dbg(&host->pdev->dev, "set completed data error\n"); atmci_set_completed(host, EVENT_DATA_ERROR); state = STATE_END_REQUEST; break; @@ -1586,10 +1607,14 @@ static void atmci_tasklet_func(unsigned long priv) * to the next step which is WAITING_NOTBUSY in write * case and directly SENDING_STOP in read case. */ + dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n"); if (!atmci_test_and_clear_pending(host, EVENT_XFER_COMPLETE)) break; + dev_dbg(&host->pdev->dev, + "(%s) set completed xfer complete\n", + __func__); atmci_set_completed(host, EVENT_XFER_COMPLETE); if (host->data->flags & MMC_DATA_WRITE) { @@ -1614,10 +1639,12 @@ static void atmci_tasklet_func(unsigned long priv) * included) or a write operation. In the latest case, * we need to send a stop command. */ + dev_dbg(&host->pdev->dev, "FSM: not busy?\n"); if (!atmci_test_and_clear_pending(host, EVENT_NOTBUSY)) break; + dev_dbg(&host->pdev->dev, "set completed not busy\n"); atmci_set_completed(host, EVENT_NOTBUSY); if (host->data) { @@ -1649,10 +1676,12 @@ static void atmci_tasklet_func(unsigned long priv) * in order to go to the end request state instead of * sending stop again. */ + dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n"); if (!atmci_test_and_clear_pending(host, EVENT_CMD_RDY)) break; + dev_dbg(&host->pdev->dev, "FSM: cmd ready\n"); host->cmd = NULL; host->data = NULL; data->bytes_xfered = data->blocks * data->blksz; @@ -1858,18 +1887,21 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) break; if (pending & ATMCI_DATA_ERROR_FLAGS) { + dev_dbg(&host->pdev->dev, "IRQ: data error\n"); atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS | ATMCI_RXRDY | ATMCI_TXRDY | ATMCI_ENDRX | ATMCI_ENDTX | ATMCI_RXBUFF | ATMCI_TXBUFE); host->data_status = status; + dev_dbg(&host->pdev->dev, "set pending data error\n"); smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); } if (pending & ATMCI_TXBUFE) { + dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n"); atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE); atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); /* @@ -1885,6 +1917,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) atmci_pdc_complete(host); } } else if (pending & ATMCI_ENDTX) { + dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n"); atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); if (host->data_size) { @@ -1895,6 +1928,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) } if (pending & ATMCI_RXBUFF) { + dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n"); atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF); atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); /* @@ -1910,6 +1944,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) atmci_pdc_complete(host); } } else if (pending & ATMCI_ENDRX) { + dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n"); atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); if (host->data_size) { @@ -1926,15 +1961,19 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) * The appropriate workaround is to use the BLKE signal. */ if (pending & ATMCI_BLKE) { + dev_dbg(&host->pdev->dev, "IRQ: blke\n"); atmci_writel(host, ATMCI_IDR, ATMCI_BLKE); smp_wmb(); + dev_dbg(&host->pdev->dev, "set pending notbusy\n"); atmci_set_pending(host, EVENT_NOTBUSY); tasklet_schedule(&host->tasklet); } if (pending & ATMCI_NOTBUSY) { + dev_dbg(&host->pdev->dev, "IRQ: not_busy\n"); atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY); smp_wmb(); + dev_dbg(&host->pdev->dev, "set pending notbusy\n"); atmci_set_pending(host, EVENT_NOTBUSY); tasklet_schedule(&host->tasklet); } @@ -1945,9 +1984,11 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) atmci_write_data_pio(host); if (pending & ATMCI_CMDRDY) { + dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n"); atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); host->cmd_status = status; smp_wmb(); + dev_dbg(&host->pdev->dev, "set pending cmd rdy\n"); atmci_set_pending(host, EVENT_CMD_RDY); tasklet_schedule(&host->tasklet); } -- cgit v1.2.3 From a5075eb94837edde6833fd5e0277fc2370cf8b39 Mon Sep 17 00:00:00 2001 From: Saugata Das Date: Thu, 17 May 2012 16:32:21 +0530 Subject: mmc: block: Allow disabling 512B sector size emulation This patch adds support for large sector size of 4KB by disabling emulation. This patch passes eMMC DATA_SECTOR_SIZE as the logical block size during mmc_blk_alloc_req. In order to use this patch for 4KB sector size, ensure that USE_NATIVE_SECTOR is enabled, partition table is 4KB sector size aligned and file system block and sector size are 4KB multiples. Signed-off-by: Saugata Das Reviewed-by: Subhash Jadavani Reviewed-by: Namjae Jeon Reviewed-by: Subhash Jadavani Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 19 +++++++++++++++++-- drivers/mmc/core/mmc.c | 2 ++ 2 files changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 91cda7551a60..dd2d374dcc7a 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1284,7 +1284,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc) int ret = 1, disable_multi = 0, retry = 0, type; enum mmc_blk_status status; struct mmc_queue_req *mq_rq; - struct request *req; + struct request *req = rqc; struct mmc_async_req *areq; if (!rqc && !mq->mqrq_prev->req) @@ -1292,6 +1292,16 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc) do { if (rqc) { + /* + * When 4KB native sector is enabled, only 8 blocks + * multiple read or write is allowed + */ + if ((brq->data.blocks & 0x07) && + (card->ext_csd.data_sector_size == 4096)) { + pr_err("%s: Transfer size is not 4KB sector size aligned\n", + req->rq_disk->disk_name); + goto cmd_abort; + } mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq); areq = &mq->mqrq_cur->mmc_active; } else @@ -1539,7 +1549,12 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, snprintf(md->disk->disk_name, sizeof(md->disk->disk_name), "mmcblk%d%s", md->name_idx, subname ? subname : ""); - blk_queue_logical_block_size(md->queue.queue, 512); + if (mmc_card_mmc(card)) + blk_queue_logical_block_size(md->queue.queue, + card->ext_csd.data_sector_size); + else + blk_queue_logical_block_size(md->queue.queue, 512); + set_capacity(md->disk, size); if (mmc_host_cmd23(card->host)) { diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2f0e11c9fd67..2d4a4b746750 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -516,6 +516,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) } else { card->ext_csd.data_tag_unit_size = 0; } + } else { + card->ext_csd.data_sector_size = 512; } out: -- cgit v1.2.3 From db35f83ef47b5f180f2670d11f5f93992314ea09 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Thu, 17 May 2012 10:27:12 +0800 Subject: mmc: omap_hsmmc: pass IRQF_ONESHOT to request_threaded_irq The flag of IRQF_ONESHOT should be passed to request_threaded_irq, otherwise the following failure message should be dumped because hardware handler is defined as NULL: [ 3.383483] genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 368 [ 3.392730] omap_hsmmc: probe of omap_hsmmc.0 failed with error -22 The patch fixes one kernel hang bug which is caused by mmc card probe failure and root device can't be brought up. Signed-off-by: Ming Lei Acked-by: Venkatraman S Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index d15b149649bf..a9fc714fb38d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1981,7 +1981,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev) ret = request_threaded_irq(mmc_slot(host).card_detect_irq, NULL, omap_hsmmc_detect, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, mmc_hostname(mmc), host); if (ret) { dev_dbg(mmc_dev(host->mmc), -- cgit v1.2.3 From 0caaa9539adcff38ce12e99f0ab25645e7eb3eea Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 16 May 2012 17:51:59 +0200 Subject: mmc: at91-mci: this driver is now deprecated at91-mci is deprecated since atmel-mci can deal with all chips. Signed-off-by: Ludovic Desroches Signed-off-by: Chris Ball --- Documentation/feature-removal-schedule.txt | 11 +++++++++++ drivers/mmc/host/Kconfig | 7 +++++-- 2 files changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/mmc') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 03ca210406ed..d212f83f17cf 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -539,3 +539,14 @@ When: 3.6 Why: setitimer is not returning -EFAULT if user pointer is NULL. This violates the spec. Who: Sasikantha Babu + +---------------------------- + +What: at91-mci driver ("CONFIG_MMC_AT91") +When: 3.7 +Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support + was added to atmel-mci as a first step to support more chips. + Then at91-mci was kept only for old IP versions (on at91rm9200 and + at91sam9261). The support of these IP versions has just been added + to atmel-mci, so atmel-mci can be used for all chips. +Who: Ludovic Desroches diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 9f1f5e2bbfef..aa131b32e3b2 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -278,10 +278,13 @@ choice Choose which driver to use for the Atmel MCI Silicon config MMC_AT91 - tristate "AT91 SD/MMC Card Interface support" + tristate "AT91 SD/MMC Card Interface support (DEPRECATED)" depends on ARCH_AT91 help - This selects the AT91 MCI controller. + This selects the AT91 MCI controller. This driver will + be removed soon (for more information have a look to + Documentation/feature-removal-schedule.txt). Please use + MMC_ATMEL_MCI. If unsure, say N. -- cgit v1.2.3