From efa2ca73a7bc1a8f8e66bcfad33391746819ffe6 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Wed, 5 Oct 2011 15:22:34 +0200 Subject: mtd: Add DiskOnChip G3 support Add support for DiskOnChip G3 chips. The support is quite limited yet : - no flash writes/erases are implemented - ECC fixes are not implemented - powerdown is not implemented - IPL handling is not yet done On the brighter side, the chip reading does work. Signed-off-by: Robert Jarzmik --- drivers/mtd/devices/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/mtd/devices/Kconfig') diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 35081ce77fbd..6d91a1f049c8 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -249,6 +249,16 @@ config MTD_DOC2001PLUS under "NAND Flash Device Drivers" (currently that driver does not support all Millennium Plus devices). +config MTD_DOCG3 + tristate "M-Systems Disk-On-Chip G3" + ---help--- + This provides an MTD device driver for the M-Systems DiskOnChip + G3 devices. + + The driver provides access to G3 DiskOnChip, distributed by + M-Systems and now Sandisk. The support is very experimental, + and doesn't give access to any write operations. + config MTD_DOCPROBE tristate select MTD_DOCECC -- cgit v1.2.3