From 6a918bade9dab40aaef80559bd1169c69e8d69cb Mon Sep 17 00:00:00 2001 From: Mike Dunn Date: Sun, 11 Mar 2012 14:21:11 -0700 Subject: mtd: flash drivers set ecc strength Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the maximum number of bit errors that can be corrected in one writesize region. Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl, which is the maximum number of bit errors that can be corrected in one ecc step. Nand infrastructure code translates this to 'ecc_strength'. Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE. It is set in the driver for all other modes. Signed-off-by: Mike Dunn Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/txx9ndfmc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/mtd/nand/txx9ndfmc.c') diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 8db0acbae6fa..26398dcf21cf 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -356,6 +356,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */ chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; chip->chip_delay = 100; chip->controller = &drvdata->hw_control; -- cgit v1.2.3