From 5d1e9c2212ea6b4dd735e4fc3dd6279a365d5d10 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 Aug 2018 10:21:49 +0200 Subject: mtd: rawnand: atmel: fix OF child-node lookup Use the new of_get_compatible_child() helper to lookup the nfc child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). While at it, also fix a related nfc-node reference leak. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: stable # 4.11 Cc: Nicolas Ferre Cc: Josh Wu Cc: Boris Brezillon Signed-off-by: Johan Hovold Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/atmel/nand-controller.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index fb33f6be7c4f..ad720494e8f7 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -2032,8 +2032,7 @@ atmel_hsmc_nand_controller_legacy_init(struct atmel_hsmc_nand_controller *nc) int ret; nand_np = dev->of_node; - nfc_np = of_find_compatible_node(dev->of_node, NULL, - "atmel,sama5d3-nfc"); + nfc_np = of_get_compatible_child(dev->of_node, "atmel,sama5d3-nfc"); if (!nfc_np) { dev_err(dev, "Could not find device node for sama5d3-nfc\n"); return -ENODEV; @@ -2447,15 +2446,19 @@ static int atmel_nand_controller_probe(struct platform_device *pdev) } if (caps->legacy_of_bindings) { + struct device_node *nfc_node; u32 ale_offs = 21; /* * If we are parsing legacy DT props and the DT contains a * valid NFC node, forward the request to the sama5 logic. */ - if (of_find_compatible_node(pdev->dev.of_node, NULL, - "atmel,sama5d3-nfc")) + nfc_node = of_get_compatible_child(pdev->dev.of_node, + "atmel,sama5d3-nfc"); + if (nfc_node) { caps = &atmel_sama5_nand_caps; + of_node_put(nfc_node); + } /* * Even if the compatible says we are dealing with an -- cgit v1.2.3 From 33bf5519ae5dd356b182a94e3622f42860274a38 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Fri, 16 Nov 2018 19:43:27 -0800 Subject: mtd: rawnand: qcom: Namespace prefix some commands PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver. drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition Caught by riscv allmodconfig. Signed-off-by: Olof Johansson Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/qcom_nandc.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index ef75dfa62a4f..699d3cf49c6d 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -150,15 +150,15 @@ #define NAND_VERSION_MINOR_SHIFT 16 /* NAND OP_CMDs */ -#define PAGE_READ 0x2 -#define PAGE_READ_WITH_ECC 0x3 -#define PAGE_READ_WITH_ECC_SPARE 0x4 -#define PROGRAM_PAGE 0x6 -#define PAGE_PROGRAM_WITH_ECC 0x7 -#define PROGRAM_PAGE_SPARE 0x9 -#define BLOCK_ERASE 0xa -#define FETCH_ID 0xb -#define RESET_DEVICE 0xd +#define OP_PAGE_READ 0x2 +#define OP_PAGE_READ_WITH_ECC 0x3 +#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PROGRAM_PAGE 0x6 +#define OP_PAGE_PROGRAM_WITH_ECC 0x7 +#define OP_PROGRAM_PAGE_SPARE 0x9 +#define OP_BLOCK_ERASE 0xa +#define OP_FETCH_ID 0xb +#define OP_RESET_DEVICE 0xd /* Default Value for NAND_DEV_CMD_VLD */ #define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ @@ -692,11 +692,11 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read) if (read) { if (host->use_ecc) - cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; else - cmd = PAGE_READ | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE; } else { - cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; + cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; } if (host->use_ecc) { @@ -1170,7 +1170,7 @@ static int nandc_param(struct qcom_nand_host *host) * in use. we configure the controller to perform a raw read of 512 * bytes to read onfi params */ - nandc_set_reg(nandc, NAND_FLASH_CMD, PAGE_READ | PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, 0); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE @@ -1224,7 +1224,7 @@ static int erase_block(struct qcom_nand_host *host, int page_addr) struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); nandc_set_reg(nandc, NAND_FLASH_CMD, - BLOCK_ERASE | PAGE_ACC | LAST_PAGE); + OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, page_addr); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, @@ -1255,7 +1255,7 @@ static int read_id(struct qcom_nand_host *host, int column) if (column == -1) return 0; - nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID); nandc_set_reg(nandc, NAND_ADDR0, column); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, @@ -1276,7 +1276,7 @@ static int reset(struct qcom_nand_host *host) struct nand_chip *chip = &host->chip; struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE); nandc_set_reg(nandc, NAND_EXEC_CMD, 1); write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); -- cgit v1.2.3 From 40b412897ccb4b98b2cfb2a0aaabed58dd9e2086 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Tue, 27 Nov 2018 07:44:52 +0000 Subject: mtd: nand: Fix memory allocation in nanddev_bbt_init() Fix the size of the buffer allocated to store the in-memory BBT. This bug was previously hidden by a different bug, that was fixed in commit d098093ba06e ("mtd: nand: Fix nanddev_neraseblocks()"). Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices") Cc: Signed-off-by: Frieder Schrempf Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/bbt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/bbt.c b/drivers/mtd/nand/bbt.c index 56cde38b92c0..044adf913854 100644 --- a/drivers/mtd/nand/bbt.c +++ b/drivers/mtd/nand/bbt.c @@ -27,7 +27,8 @@ int nanddev_bbt_init(struct nand_device *nand) unsigned int nwords = DIV_ROUND_UP(nblocks * bits_per_block, BITS_PER_LONG); - nand->bbt.cache = kzalloc(nwords, GFP_KERNEL); + nand->bbt.cache = kcalloc(nwords, sizeof(*nand->bbt.cache), + GFP_KERNEL); if (!nand->bbt.cache) return -ENOMEM; -- cgit v1.2.3