From 03fd3cf5a179da12e6bee5e9d74b648aff68dc4c Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Tue, 11 Jan 2011 04:32:31 +0000 Subject: can: add driver for Softing card This patch adds a driver for the platform:softing device. This will create (up to) 2 CAN network devices from 1 platform:softing device Signed-off-by: Kurt Van Dijck Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/softing/Kconfig | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 drivers/net/can/softing/Kconfig (limited to 'drivers/net/can/softing/Kconfig') diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig new file mode 100644 index 000000000000..072f337f42e3 --- /dev/null +++ b/drivers/net/can/softing/Kconfig @@ -0,0 +1,16 @@ +config CAN_SOFTING + tristate "Softing Gmbh CAN generic support" + depends on CAN_DEV + ---help--- + Support for CAN cards from Softing Gmbh & some cards + from Vector Gmbh. + Softing Gmbh CAN cards come with 1 or 2 physical busses. + Those cards typically use Dual Port RAM to communicate + with the host CPU. The interface is then identical for PCI + and PCMCIA cards. This driver operates on a platform device, + which has been created by softing_cs or softing_pci driver. + Warning: + The API of the card does not allow fine control per bus, but + controls the 2 busses on the card together. + As such, some actions (start/stop/busoff recovery) on 1 bus + must bring down the other bus too temporarily. -- cgit v1.2.3