From 96f4d430c507ed4856048c2dc9c1a2ea5b5e74e4 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Mon, 23 Apr 2018 11:43:17 -0500 Subject: amd-xgbe: Improve KR auto-negotiation and training Update xgbe-phy-v2.c to make use of the auto-negotiation (AN) phy hooks to improve the ability to successfully complete Clause 73 AN when running at 10gbps. Hardware can sometimes have issues with CDR lock when the AN DME page exchange is being performed. The AN and KR training hooks are used as follows: - The pre AN hook is used to disable CDR tracking in the PHY so that the DME page exchange can be successfully and consistently completed. - The post KR training hook is used to re-enable the CDR tracking so that KR training can successfully complete. - The post AN hook is used to check for an unsuccessful AN which will increase a CDR tracking enablement delay (up to a maximum value). Add two debugfs entries to allow control over use of the CDR tracking workaround. The debugfs entries allow the CDR tracking workaround to be disabled and determine whether to re-enable CDR tracking before or after link training has been initiated. Also, with these changes the receiver reset cycle that is performed during the link status check can be performed less often. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/ethernet/amd/xgbe/xgbe-common.h') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h index 7ea72ef11a55..d272dc6984ac 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h @@ -1321,6 +1321,10 @@ #define MDIO_VEND2_AN_STAT 0x8002 #endif +#ifndef MDIO_VEND2_PMA_CDR_CONTROL +#define MDIO_VEND2_PMA_CDR_CONTROL 0x8056 +#endif + #ifndef MDIO_CTRL1_SPEED1G #define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100) #endif @@ -1369,6 +1373,10 @@ #define XGBE_AN_CL37_TX_CONFIG_MASK 0x08 #define XGBE_AN_CL37_MII_CTRL_8BIT 0x0100 +#define XGBE_PMA_CDR_TRACK_EN_MASK 0x01 +#define XGBE_PMA_CDR_TRACK_EN_OFF 0x00 +#define XGBE_PMA_CDR_TRACK_EN_ON 0x01 + /* Bit setting and getting macros * The get macro will extract the current bit field value from within * the variable -- cgit v1.2.3