From 4000e7a78d12d71e37fcd2366c73fcb02e97fffb Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Fri, 19 Apr 2013 07:01:11 +0000 Subject: qlcnic: Support MAC address, Tx rate config. o Add support for MAC address and Tx rate configuration per VF via iproute2 tool. o Tx rate change is allowed while the guest is running and the VF driver is loaded. o MAC address change is allowed only when VF driver is not loaded. Signed-off-by: Manish Chopra Signed-off-by: Sucheta Chakraborty Signed-off-by: Rajesh Borundia Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 131 ++++++++++++++++++++- 1 file changed, 128 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index a0135297b1c6..59d385b7ccd7 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -10,6 +10,8 @@ #include #define QLCNIC_SRIOV_VF_MAX_MAC 1 +#define QLC_VF_MIN_TX_RATE 100 +#define QLC_VF_MAX_TX_RATE 9999 static int qlcnic_sriov_pf_get_vport_handle(struct qlcnic_adapter *, u8); @@ -62,8 +64,9 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, { struct qlcnic_sriov *sriov = adapter->ahw->sriov; struct qlcnic_resources *res = &sriov->ff_max; - int ret = -EIO, vpid; u32 temp, num_vf_macs, num_vfs, max; + int ret = -EIO, vpid, id; + struct qlcnic_vport *vp; vpid = qlcnic_sriov_pf_get_vport_handle(adapter, func); if (vpid < 0) @@ -72,8 +75,6 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, num_vfs = sriov->num_vfs; max = num_vfs + 1; info->bit_offsets = 0xffff; - info->min_tx_bw = 0; - info->max_tx_bw = MAX_BW; info->max_tx_ques = res->num_tx_queues / max; info->max_rx_mcast_mac_filters = res->num_rx_mcast_mac_filters; num_vf_macs = QLCNIC_SRIOV_VF_MAX_MAC; @@ -83,7 +84,15 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, info->max_rx_ucast_mac_filters = temp; temp = res->num_tx_mac_filters - (num_vfs * num_vf_macs); info->max_tx_mac_filters = temp; + info->min_tx_bw = 0; + info->max_tx_bw = MAX_BW; } else { + id = qlcnic_sriov_func_to_index(adapter, func); + if (id < 0) + return id; + vp = sriov->vf_info[id].vp; + info->min_tx_bw = vp->min_tx_bw; + info->max_tx_bw = vp->max_tx_bw; info->max_rx_ucast_mac_filters = num_vf_macs; info->max_tx_mac_filters = num_vf_macs; } @@ -1416,3 +1425,119 @@ int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *adapter) __func__, ahw->op_mode); return err; } + +int qlcnic_sriov_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_sriov *sriov = adapter->ahw->sriov; + int i, num_vfs = sriov->num_vfs; + struct qlcnic_vf_info *vf_info; + u8 *curr_mac; + + if (!qlcnic_sriov_pf_check(adapter)) + return -EOPNOTSUPP; + + if (!is_valid_ether_addr(mac) || vf >= num_vfs) + return -EINVAL; + + if (!compare_ether_addr(adapter->mac_addr, mac)) { + netdev_err(netdev, "MAC address is already in use by the PF\n"); + return -EINVAL; + } + + for (i = 0; i < num_vfs; i++) { + vf_info = &sriov->vf_info[i]; + if (!compare_ether_addr(vf_info->vp->mac, mac)) { + netdev_err(netdev, + "MAC address is already in use by VF %d\n", + i); + return -EINVAL; + } + } + + vf_info = &sriov->vf_info[vf]; + curr_mac = vf_info->vp->mac; + + if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) { + netdev_err(netdev, + "MAC address change failed for VF %d, as VF driver is loaded. Please unload VF driver and retry the operation\n", + vf); + return -EOPNOTSUPP; + } + + memcpy(curr_mac, mac, netdev->addr_len); + netdev_info(netdev, "MAC Address %pM is configured for VF %d\n", + mac, vf); + return 0; +} + +int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf, int tx_rate) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_sriov *sriov = adapter->ahw->sriov; + struct qlcnic_vf_info *vf_info; + struct qlcnic_info nic_info; + struct qlcnic_vport *vp; + u16 vpid; + + if (!qlcnic_sriov_pf_check(adapter)) + return -EOPNOTSUPP; + + if (vf >= sriov->num_vfs) + return -EINVAL; + + if (tx_rate >= 10000 || tx_rate < 100) { + netdev_err(netdev, + "Invalid Tx rate, allowed range is [%d - %d]", + QLC_VF_MIN_TX_RATE, QLC_VF_MAX_TX_RATE); + return -EINVAL; + } + + if (tx_rate == 0) + tx_rate = 10000; + + vf_info = &sriov->vf_info[vf]; + vp = vf_info->vp; + vpid = vp->handle; + + if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) { + if (qlcnic_sriov_get_vf_vport_info(adapter, &nic_info, vpid)) + return -EIO; + + nic_info.max_tx_bw = tx_rate / 100; + nic_info.bit_offsets = BIT_0; + + if (qlcnic_sriov_pf_set_vport_info(adapter, &nic_info, vpid)) + return -EIO; + } + + vp->max_tx_bw = tx_rate / 100; + netdev_info(netdev, + "Setting Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n", + tx_rate, vp->max_tx_bw, vf); + return 0; +} + +int qlcnic_sriov_get_vf_config(struct net_device *netdev, + int vf, struct ifla_vf_info *ivi) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_sriov *sriov = adapter->ahw->sriov; + struct qlcnic_vport *vp; + + if (!qlcnic_sriov_pf_check(adapter)) + return -EOPNOTSUPP; + + if (vf >= sriov->num_vfs) + return -EINVAL; + + vp = sriov->vf_info[vf].vp; + memcpy(&ivi->mac, vp->mac, ETH_ALEN); + if (vp->max_tx_bw == MAX_BW) + ivi->tx_rate = 0; + else + ivi->tx_rate = vp->max_tx_bw * 100; + + ivi->vf = vf; + return 0; +} -- cgit v1.2.3