From 652f6787c082a174f0bbfa7f895b65b03d8d46c9 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 17 Jul 2009 02:27:07 +0000 Subject: fs_enet/mii-fec.c: fix MII speed calculation The MII speed calculation was based on the CPU clock (ppc_proc_freq), but for MPC512x we must use the bus clock instead. This patch makes it use the correct clock and makes sure we don't clobber reserved bits in the MII_SPEED register. Signed-off-by: Wolfgang Denk Cc: Grant Likely Cc: Kumar Gala Cc: Acked-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/fs_enet/mii-fec.c | 37 +++++++++++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) (limited to 'drivers/net/fs_enet/mii-fec.c') diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c index 75a09994d665..a2d69c1cd07e 100644 --- a/drivers/net/fs_enet/mii-fec.c +++ b/drivers/net/fs_enet/mii-fec.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "fs_enet.h" #include "fec.h" @@ -103,11 +104,11 @@ static int fs_enet_fec_mii_reset(struct mii_bus *bus) static int __devinit fs_enet_mdio_probe(struct of_device *ofdev, const struct of_device_id *match) { - struct device_node *np = NULL; struct resource res; struct mii_bus *new_bus; struct fec_info *fec; - int ret = -ENOMEM, i; + int (*get_bus_freq)(struct device_node *) = match->data; + int ret = -ENOMEM, clock, speed; new_bus = mdiobus_alloc(); if (!new_bus) @@ -133,13 +134,35 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev, if (!fec->fecp) goto out_fec; - fec->mii_speed = ((ppc_proc_freq + 4999999) / 5000000) << 1; + if (get_bus_freq) { + clock = get_bus_freq(ofdev->node); + if (!clock) { + /* Use maximum divider if clock is unknown */ + dev_warn(&ofdev->dev, "could not determine IPS clock\n"); + clock = 0x3F * 5000000; + } + } else + clock = ppc_proc_freq; + + /* + * Scale for a MII clock <= 2.5 MHz + * Note that only 6 bits (25:30) are available for MII speed. + */ + speed = (clock + 4999999) / 5000000; + if (speed > 0x3F) { + speed = 0x3F; + dev_err(&ofdev->dev, + "MII clock (%d Hz) exceeds max (2.5 MHz)\n", + clock / speed); + } + + fec->mii_speed = speed << 1; setbits32(&fec->fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); setbits32(&fec->fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); out_be32(&fec->fecp->fec_ievent, FEC_ENET_MII); - out_be32(&fec->fecp->fec_mii_speed, fec->mii_speed); + clrsetbits_be32(&fec->fecp->fec_mii_speed, 0x7E, fec->mii_speed); new_bus->phy_mask = ~0; new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); @@ -188,6 +211,12 @@ static struct of_device_id fs_enet_mdio_fec_match[] = { { .compatible = "fsl,pq1-fec-mdio", }, +#if defined(CONFIG_PPC_MPC512x) + { + .compatible = "fsl,mpc5121-fec-mdio", + .data = mpc5xxx_get_bus_frequency, + }, +#endif {}, }; -- cgit v1.2.3