From 1d3bb996481e116f5f2b127cbd29b83365d2cf62 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 23 Aug 2007 13:56:01 +1000 Subject: Device tree aware EMAC driver Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson Signed-off-by: Jeff Garzik --- drivers/net/ibm_newemac/zmii.c | 322 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 322 insertions(+) create mode 100644 drivers/net/ibm_newemac/zmii.c (limited to 'drivers/net/ibm_newemac/zmii.c') diff --git a/drivers/net/ibm_newemac/zmii.c b/drivers/net/ibm_newemac/zmii.c new file mode 100644 index 000000000000..d06312901848 --- /dev/null +++ b/drivers/net/ibm_newemac/zmii.c @@ -0,0 +1,322 @@ +/* + * drivers/net/ibm_newemac/zmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * + * Based on original work by + * Armin Kuster + * Copyright 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include + +#include "emac.h" +#include "core.h" + +/* ZMIIx_FER */ +#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4)) +#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \ + ZMII_FER_MDI(2) | ZMII_FER_MDI(3)) + +#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4)) +#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4)) +#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4)) + +/* ZMIIx_SSR */ +#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4)) +#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4)) +#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4)) + +/* ZMII only supports MII, RMII and SMII + * we also support autodetection for backward compatibility + */ +static inline int zmii_valid_mode(int mode) +{ + return mode == PHY_MODE_MII || + mode == PHY_MODE_RMII || + mode == PHY_MODE_SMII || + mode == PHY_MODE_NA; +} + +static inline const char *zmii_mode_name(int mode) +{ + switch (mode) { + case PHY_MODE_MII: + return "MII"; + case PHY_MODE_RMII: + return "RMII"; + case PHY_MODE_SMII: + return "SMII"; + default: + BUG(); + } +} + +static inline u32 zmii_mode_mask(int mode, int input) +{ + switch (mode) { + case PHY_MODE_MII: + return ZMII_FER_MII(input); + case PHY_MODE_RMII: + return ZMII_FER_RMII(input); + case PHY_MODE_SMII: + return ZMII_FER_SMII(input); + default: + return 0; + } +} + +int __devinit zmii_attach(struct of_device *ofdev, int input, int *mode) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct zmii_regs *p = dev->base; + + ZMII_DBG(dev, "init(%d, %d)" NL, input, *mode); + + if (!zmii_valid_mode(*mode)) + /* Probably an EMAC connected to RGMII, + * but it still may need ZMII for MDIO so + * we don't fail here. + */ + return 0; + + mutex_lock(&dev->lock); + + /* Autodetect ZMII mode if not specified. + * This is only for backward compatibility with the old driver. + * Please, always specify PHY mode in your board port to avoid + * any surprises. + */ + if (dev->mode == PHY_MODE_NA) { + if (*mode == PHY_MODE_NA) { + u32 r = dev->fer_save; + + ZMII_DBG(dev, "autodetecting mode, FER = 0x%08x" NL, r); + + if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) + dev->mode = PHY_MODE_MII; + else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) + dev->mode = PHY_MODE_RMII; + else + dev->mode = PHY_MODE_SMII; + } else + dev->mode = *mode; + + printk(KERN_NOTICE "%s: bridge in %s mode\n", + ofdev->node->full_name, zmii_mode_name(dev->mode)); + } else { + /* All inputs must use the same mode */ + if (*mode != PHY_MODE_NA && *mode != dev->mode) { + printk(KERN_ERR + "%s: invalid mode %d specified for input %d\n", + ofdev->node->full_name, *mode, input); + mutex_unlock(&dev->lock); + return -EINVAL; + } + } + + /* Report back correct PHY mode, + * it may be used during PHY initialization. + */ + *mode = dev->mode; + + /* Enable this input */ + out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input)); + ++dev->users; + + mutex_unlock(&dev->lock); + + return 0; +} + +void zmii_get_mdio(struct of_device *ofdev, int input) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + u32 fer; + + ZMII_DBG2(dev, "get_mdio(%d)" NL, input); + + mutex_lock(&dev->lock); + + fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL; + out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input)); +} + +void zmii_put_mdio(struct of_device *ofdev, int input) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + + ZMII_DBG2(dev, "put_mdio(%d)" NL, input); + mutex_unlock(&dev->lock); +} + + +void zmii_set_speed(struct of_device *ofdev, int input, int speed) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + u32 ssr; + + mutex_lock(&dev->lock); + + ssr = in_be32(&dev->base->ssr); + + ZMII_DBG(dev, "speed(%d, %d)" NL, input, speed); + + if (speed == SPEED_100) + ssr |= ZMII_SSR_SP(input); + else + ssr &= ~ZMII_SSR_SP(input); + + out_be32(&dev->base->ssr, ssr); + + mutex_unlock(&dev->lock); +} + +void __devexit zmii_detach(struct of_device *ofdev, int input) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + + BUG_ON(!dev || dev->users == 0); + + mutex_lock(&dev->lock); + + ZMII_DBG(dev, "detach(%d)" NL, input); + + /* Disable this input */ + out_be32(&dev->base->fer, + in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input)); + + --dev->users; + + mutex_unlock(&dev->lock); +} + +int zmii_get_regs_len(struct of_device *ofdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct zmii_regs); +} + +void *zmii_dump_regs(struct of_device *ofdev, void *buf) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = 0; /* for now, are there chips with more than one + * zmii ? if yes, then we'll add a cell_index + * like we do for emac + */ + memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs)); + return regs + 1; +} + +static int __devinit zmii_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + struct zmii_instance *dev; + struct resource regs; + int rc; + + rc = -ENOMEM; + dev = kzalloc(sizeof(struct zmii_instance), GFP_KERNEL); + if (dev == NULL) { + printk(KERN_ERR "%s: could not allocate ZMII device!\n", + np->full_name); + goto err_gone; + } + + mutex_init(&dev->lock); + dev->ofdev = ofdev; + dev->mode = PHY_MODE_NA; + + rc = -ENXIO; + if (of_address_to_resource(np, 0, ®s)) { + printk(KERN_ERR "%s: Can't get registers address\n", + np->full_name); + goto err_free; + } + + rc = -ENOMEM; + dev->base = (struct zmii_regs *)ioremap(regs.start, + sizeof(struct zmii_regs)); + if (dev->base == NULL) { + printk(KERN_ERR "%s: Can't map device registers!\n", + np->full_name); + goto err_free; + } + + /* We may need FER value for autodetection later */ + dev->fer_save = in_be32(&dev->base->fer); + + /* Disable all inputs by default */ + out_be32(&dev->base->fer, 0); + + printk(KERN_INFO + "ZMII %s initialized\n", ofdev->node->full_name); + wmb(); + dev_set_drvdata(&ofdev->dev, dev); + + return 0; + + err_free: + kfree(dev); + err_gone: + return rc; +} + +static int __devexit zmii_remove(struct of_device *ofdev) +{ + struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); + + dev_set_drvdata(&ofdev->dev, NULL); + + WARN_ON(dev->users != 0); + + iounmap(dev->base); + kfree(dev); + + return 0; +} + +static struct of_device_id zmii_match[] = +{ + { + .compatible = "ibm,zmii", + }, + /* For backward compat with old DT */ + { + .type = "emac-zmii", + }, + {}, +}; + +static struct of_platform_driver zmii_driver = { + .name = "emac-zmii", + .match_table = zmii_match, + + .probe = zmii_probe, + .remove = zmii_remove, +}; + +int __init zmii_init(void) +{ + return of_register_platform_driver(&zmii_driver); +} + +void zmii_exit(void) +{ + of_unregister_platform_driver(&zmii_driver); +} -- cgit v1.2.3