From a853c68e29bb974ca0cc0a8eaf88c333217556aa Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 11 Jun 2021 23:05:27 +0300 Subject: net: pcs: xpcs: export xpcs_do_config and xpcs_link_up The sja1105 hardware has a quirk in that some changes require a switch reset, which loses all configuration. When the reset is initiated, everything needs to be reprogrammed, including the MACs and the PCS. This is currently done in sja1105_static_config_reload() - we manually call sja1105_adjust_port_config(), sja1105_sgmii_pcs_config() and sja1105_sgmii_pcs_force_speed() which are all internal functions. There is a desire for sja1105 to use the common xpcs driver, and that means that the equivalents of those functions, xpcs_do_config() and xpcs_link_up() respectively, will no longer be local functions. Forcing phylink to retrigger a resolve somehow, say by doing dev_close() followed by dev_open() is not really an option, because the CPU port might have a PCS as well, and there is no net device which we can close and reopen for that. Additionally, the dev_close/dev_open sequence might force a renegotiation of the copper-side link for SGMII ports connected to a PHY, and this is undesirable as well, because the switch reset is much quicker than a PHY autoneg, so we would have a lot more downtime. The only solution I see is for the sja1105 driver to keep doing what it's doing, and that means we need to export the equivalents from xpcs for sja1105_sgmii_pcs_config and sja1105_sgmii_pcs_force_speed, and call them directly in sja1105_static_config_reload(). This will be done during the conversion patch. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/pcs/pcs-xpcs.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/net/pcs/pcs-xpcs.c') diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c index b66e46fc88dc..63fda3fc40aa 100644 --- a/drivers/net/pcs/pcs-xpcs.c +++ b/drivers/net/pcs/pcs-xpcs.c @@ -757,8 +757,8 @@ static int xpcs_config_2500basex(struct dw_xpcs *xpcs) return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, ret); } -static int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface, - unsigned int mode) +int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface, + unsigned int mode) { const struct xpcs_compat *compat; int ret; @@ -797,6 +797,7 @@ static int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface, return 0; } +EXPORT_SYMBOL_GPL(xpcs_do_config); static int xpcs_config(struct phylink_pcs *pcs, unsigned int mode, phy_interface_t interface, @@ -945,8 +946,8 @@ static void xpcs_link_up_sgmii(struct dw_xpcs *xpcs, unsigned int mode, pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret)); } -static void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode, - phy_interface_t interface, int speed, int duplex) +void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, int speed, int duplex) { struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs); @@ -955,6 +956,7 @@ static void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode, if (interface == PHY_INTERFACE_MODE_SGMII) return xpcs_link_up_sgmii(xpcs, mode, speed, duplex); } +EXPORT_SYMBOL_GPL(xpcs_link_up); static u32 xpcs_get_id(struct dw_xpcs *xpcs) { -- cgit v1.2.3