From 15b9e5330f94ccd8202a3eacc79b5d27da82e1c6 Mon Sep 17 00:00:00 2001 From: Bogdan Purcareata Date: Mon, 29 May 2017 09:11:30 +0000 Subject: net: phy: Add Cortina CS4340 driver Add basic support for Cortina PHY drivers. Support only CS4340 for now. The phys are not compatible with IEEE 802.3 clause 22/45 registers. Implement proper read_status support. The generic 10G phy driver causes bus register access errors. The driver should be described using the "ethernet-phy-id" device tree compatible. Signed-off-by: Bogdan Purcareata Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/phy/Makefile') diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index e36db9a2ba38..e2fde094f63d 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_CICADA_PHY) += cicada.o +obj-$(CONFIG_CORTINA_PHY) += cortina.o obj-$(CONFIG_DAVICOM_PHY) += davicom.o obj-$(CONFIG_DP83640_PHY) += dp83640.o obj-$(CONFIG_DP83848_PHY) += dp83848.o -- cgit v1.2.3 From 5acde34a5a420ffe7441bb7d3909dc2618025c3c Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 5 Jun 2017 12:22:50 +0100 Subject: net: phy: add 802.3 clause 45 support to phylib Add generic helpers for 802.3 clause 45 PHYs for >= 10Gbps support. Reviewed-by: Andrew Lunn Signed-off-by: Russell King Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/Makefile | 2 +- drivers/net/phy/phy-c45.c | 234 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy_device.c | 20 ++-- include/linux/phy.h | 12 +++ 4 files changed, 253 insertions(+), 15 deletions(-) create mode 100644 drivers/net/phy/phy-c45.c (limited to 'drivers/net/phy/Makefile') diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index e2fde094f63d..ae58f507aba9 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -1,6 +1,6 @@ # Makefile for Linux PHY drivers and MDIO bus drivers -libphy-y := phy.o phy-core.o phy_device.o +libphy-y := phy.o phy-c45.o phy-core.o phy_device.o mdio-bus-y += mdio_bus.o mdio_device.o ifdef CONFIG_MDIO_DEVICE diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c new file mode 100644 index 000000000000..d311d6e6141c --- /dev/null +++ b/drivers/net/phy/phy-c45.c @@ -0,0 +1,234 @@ +/* + * Clause 45 PHY support + */ +#include +#include +#include +#include +#include + +/** + * genphy_c45_setup_forced - configures a forced speed + * @phydev: target phy_device struct + */ +int genphy_c45_pma_setup_forced(struct phy_device *phydev) +{ + int ctrl1, ctrl2, ret; + + /* Half duplex is not supported */ + if (phydev->duplex != DUPLEX_FULL) + return -EINVAL; + + ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); + if (ctrl1 < 0) + return ctrl1; + + ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2); + if (ctrl2 < 0) + return ctrl2; + + ctrl1 &= ~MDIO_CTRL1_SPEEDSEL; + /* + * PMA/PMD type selection is 1.7.5:0 not 1.7.3:0. See 45.2.1.6.1 + * in 802.3-2012 and 802.3-2015. + */ + ctrl2 &= ~(MDIO_PMA_CTRL2_TYPE | 0x30); + + switch (phydev->speed) { + case SPEED_10: + ctrl2 |= MDIO_PMA_CTRL2_10BT; + break; + case SPEED_100: + ctrl1 |= MDIO_PMA_CTRL1_SPEED100; + ctrl2 |= MDIO_PMA_CTRL2_100BTX; + break; + case SPEED_1000: + ctrl1 |= MDIO_PMA_CTRL1_SPEED1000; + /* Assume 1000base-T */ + ctrl2 |= MDIO_PMA_CTRL2_1000BT; + break; + case SPEED_10000: + ctrl1 |= MDIO_CTRL1_SPEED10G; + /* Assume 10Gbase-T */ + ctrl2 |= MDIO_PMA_CTRL2_10GBT; + break; + default: + return -EINVAL; + } + + ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1); + if (ret < 0) + return ret; + + return phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2); +} +EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced); + +/** + * genphy_c45_an_disable_aneg - disable auto-negotiation + * @phydev: target phy_device struct + * + * Disable auto-negotiation in the Clause 45 PHY. The link parameters + * parameters are controlled through the PMA/PMD MMD registers. + * + * Returns zero on success, negative errno code on failure. + */ +int genphy_c45_an_disable_aneg(struct phy_device *phydev) +{ + int val; + + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); + if (val < 0) + return val; + + val &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART); + + return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val); +} +EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg); + +/** + * genphy_c45_restart_aneg - Enable and restart auto-negotiation + * @phydev: target phy_device struct + * + * This assumes that the auto-negotiation MMD is present. + * + * Enable and restart auto-negotiation. + */ +int genphy_c45_restart_aneg(struct phy_device *phydev) +{ + int val; + + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); + if (val < 0) + return val; + + val |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART; + + return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val); +} +EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg); + +/** + * genphy_c45_aneg_done - return auto-negotiation complete status + * @phydev: target phy_device struct + * + * This assumes that the auto-negotiation MMD is present. + * + * Reads the status register from the auto-negotiation MMD, returning: + * - positive if auto-negotiation is complete + * - negative errno code on error + * - zero otherwise + */ +int genphy_c45_aneg_done(struct phy_device *phydev) +{ + int val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + + return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0; +} +EXPORT_SYMBOL_GPL(genphy_c45_aneg_done); + +/** + * genphy_c45_read_link - read the overall link status from the MMDs + * @phydev: target phy_device struct + * @mmd_mask: MMDs to read status from + * + * Read the link status from the specified MMDs, and if they all indicate + * that the link is up, return positive. If an error is encountered, + * a negative errno will be returned, otherwise zero. + */ +int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask) +{ + int val, devad; + bool link = true; + + while (mmd_mask) { + devad = __ffs(mmd_mask); + mmd_mask &= ~BIT(devad); + + /* The link state is latched low so that momentary link + * drops can be detected. Do not double-read the status + * register if the link is down. + */ + val = phy_read_mmd(phydev, devad, MDIO_STAT1); + if (val < 0) + return val; + + if (!(val & MDIO_STAT1_LSTATUS)) + link = false; + } + + return link; +} +EXPORT_SYMBOL_GPL(genphy_c45_read_link); + +/** + * genphy_c45_read_lpa - read the link partner advertisment and pause + * @phydev: target phy_device struct + * + * Read the Clause 45 defined base (7.19) and 10G (7.33) status registers, + * filling in the link partner advertisment, pause and asym_pause members + * in @phydev. This assumes that the auto-negotiation MMD is present, and + * the backplane bit (7.48.0) is clear. Clause 45 PHY drivers are expected + * to fill in the remainder of the link partner advert from vendor registers. + */ +int genphy_c45_read_lpa(struct phy_device *phydev) +{ + int val; + + /* Read the link partner's base page advertisment */ + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); + if (val < 0) + return val; + + phydev->lp_advertising = mii_lpa_to_ethtool_lpa_t(val); + phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0; + phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0; + + /* Read the link partner's 10G advertisment */ + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); + if (val < 0) + return val; + + if (val & MDIO_AN_10GBT_STAT_LP10G) + phydev->lp_advertising |= ADVERTISED_10000baseT_Full; + + return 0; +} +EXPORT_SYMBOL_GPL(genphy_c45_read_lpa); + +/** + * genphy_c45_read_pma - read link speed etc from PMA + * @phydev: target phy_device struct + */ +int genphy_c45_read_pma(struct phy_device *phydev) +{ + int val; + + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); + if (val < 0) + return val; + + switch (val & MDIO_CTRL1_SPEEDSEL) { + case 0: + phydev->speed = SPEED_10; + break; + case MDIO_PMA_CTRL1_SPEED100: + phydev->speed = SPEED_100; + break; + case MDIO_PMA_CTRL1_SPEED1000: + phydev->speed = SPEED_1000; + break; + case MDIO_CTRL1_SPEED10G: + phydev->speed = SPEED_10000; + break; + default: + phydev->speed = SPEED_UNKNOWN; + break; + } + + phydev->duplex = DUPLEX_FULL; + + return 0; +} +EXPORT_SYMBOL_GPL(genphy_c45_read_pma); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 37a1e98908e3..6a79e24fa312 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1508,27 +1508,19 @@ EXPORT_SYMBOL(genphy_read_status); static int gen10g_read_status(struct phy_device *phydev) { - int devad, reg; u32 mmd_mask = phydev->c45_ids.devices_in_package; - - phydev->link = 1; + int ret; /* For now just lie and say it's 10G all the time */ phydev->speed = SPEED_10000; phydev->duplex = DUPLEX_FULL; - for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { - if (!(mmd_mask & 1)) - continue; + /* Avoid reading the vendor MMDs */ + mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2)); - /* Read twice because link state is latched and a - * read moves the current state into the register - */ - phy_read_mmd(phydev, devad, MDIO_STAT1); - reg = phy_read_mmd(phydev, devad, MDIO_STAT1); - if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) - phydev->link = 0; - } + ret = genphy_c45_read_link(phydev, mmd_mask); + + phydev->link = ret > 0 ? 1 : 0; return 0; } diff --git a/include/linux/phy.h b/include/linux/phy.h index 748e526c0698..a47eb5e841d2 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -827,6 +827,8 @@ static inline const char *phydev_name(const struct phy_device *phydev) void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) __printf(2, 3); void phy_attached_info(struct phy_device *phydev); + +/* Clause 22 PHY */ int genphy_config_init(struct phy_device *phydev); int genphy_setup_forced(struct phy_device *phydev); int genphy_restart_aneg(struct phy_device *phydev); @@ -841,6 +843,16 @@ static inline int genphy_no_soft_reset(struct phy_device *phydev) { return 0; } + +/* Clause 45 PHY */ +int genphy_c45_restart_aneg(struct phy_device *phydev); +int genphy_c45_aneg_done(struct phy_device *phydev); +int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask); +int genphy_c45_read_lpa(struct phy_device *phydev); +int genphy_c45_read_pma(struct phy_device *phydev); +int genphy_c45_pma_setup_forced(struct phy_device *phydev); +int genphy_c45_an_disable_aneg(struct phy_device *phydev); + void phy_driver_unregister(struct phy_driver *drv); void phy_drivers_unregister(struct phy_driver *drv, int n); int phy_driver_register(struct phy_driver *new_driver, struct module *owner); -- cgit v1.2.3 From 20b2af32ff3f0ac74f2bfd0bc2c175b56002d1f1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 5 Jun 2017 12:23:16 +0100 Subject: net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support Add phylib support for the Marvell Alaska X 10 Gigabit PHY (MV88X3310). This phy is able to operate at 10G, 1G, 100M and 10M speeds, and only supports Clause 45 accesses. The PHY appears (based on the vendor IDs) to be two different vendors IP, with each devad containing several instances. This PHY driver has only been tested with the RJ45 copper port, fiber port and a Marvell Armada 8040-based ethernet interface. It should be noted that to use the full range of speeds, MAC drivers need to also reconfigure the link mode as per phydev->interface, since the PHY automatically changes its interface mode depending on the negotiated speed. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- MAINTAINERS | 6 + drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/marvell10g.c | 368 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 380 insertions(+) create mode 100644 drivers/net/phy/marvell10g.c (limited to 'drivers/net/phy/Makefile') diff --git a/MAINTAINERS b/MAINTAINERS index 6b7625ff9875..3cf8b0a22019 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7979,6 +7979,12 @@ S: Maintained F: drivers/net/ethernet/marvell/mv643xx_eth.* F: include/linux/mv643xx.h +MARVELL MV88X3310 PHY DRIVER +M: Russell King +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/phy/marvell10g.c + MARVELL MVNETA ETHERNET DRIVER M: Thomas Petazzoni L: netdev@vger.kernel.org diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 0c516d3229d0..65af31f24f01 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -292,6 +292,11 @@ config MARVELL_PHY ---help--- Currently has a driver for the 88E1011S +config MARVELL_10G_PHY + tristate "Marvell Alaska 10Gbit PHYs" + ---help--- + Support for the Marvell Alaska MV88X3310 and compatible PHYs. + config MESON_GXL_PHY tristate "Amlogic Meson GXL Internal PHY" depends on ARCH_MESON || COMPILE_TEST diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index ae58f507aba9..8e9b9f349384 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_MARVELL_PHY) += marvell.o +obj-$(CONFIG_MARVELL_10G_PHY) += marvell10g.o obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o obj-$(CONFIG_MICREL_PHY) += micrel.o diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c new file mode 100644 index 000000000000..aebc08beceba --- /dev/null +++ b/drivers/net/phy/marvell10g.c @@ -0,0 +1,368 @@ +/* + * Marvell 10G 88x3310 PHY driver + * + * Based upon the ID registers, this PHY appears to be a mixture of IPs + * from two different companies. + * + * There appears to be several different data paths through the PHY which + * are automatically managed by the PHY. The following has been determined + * via observation and experimentation: + * + * SGMII PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for <= 1G) + * 10GBASE-KR PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for 10G) + * 10GBASE-KR PHYXS -- BASE-R PCS -- Fiber + * + * If both the fiber and copper ports are connected, the first to gain + * link takes priority and the other port is completely locked out. + */ +#include + +enum { + MV_PCS_BASE_T = 0x0000, + MV_PCS_BASE_R = 0x1000, + MV_PCS_1000BASEX = 0x2000, + + /* These registers appear at 0x800X and 0xa00X - the 0xa00X control + * registers appear to set themselves to the 0x800X when AN is + * restarted, but status registers appear readable from either. + */ + MV_AN_CTRL1000 = 0x8000, /* 1000base-T control register */ + MV_AN_STAT1000 = 0x8001, /* 1000base-T status register */ + + /* This register appears to reflect the copper status */ + MV_AN_RESULT = 0xa016, + MV_AN_RESULT_SPD_10 = BIT(12), + MV_AN_RESULT_SPD_100 = BIT(13), + MV_AN_RESULT_SPD_1000 = BIT(14), + MV_AN_RESULT_SPD_10000 = BIT(15), +}; + +static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg, + u16 mask, u16 bits) +{ + int old, val, ret; + + old = phy_read_mmd(phydev, devad, reg); + if (old < 0) + return old; + + val = (old & ~mask) | (bits & mask); + if (val == old) + return 0; + + ret = phy_write_mmd(phydev, devad, reg, val); + + return ret < 0 ? ret : 1; +} + +static int mv3310_probe(struct phy_device *phydev) +{ + u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; + + if (!phydev->is_c45 || + (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) + return -ENODEV; + + return 0; +} + +/* + * Resetting the MV88X3310 causes it to become non-responsive. Avoid + * setting the reset bit(s). + */ +static int mv3310_soft_reset(struct phy_device *phydev) +{ + return 0; +} + +static int mv3310_config_init(struct phy_device *phydev) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; + u32 mask; + int val; + + /* Check that the PHY interface type is compatible */ + if (phydev->interface != PHY_INTERFACE_MODE_SGMII && + phydev->interface != PHY_INTERFACE_MODE_XGMII && + phydev->interface != PHY_INTERFACE_MODE_XAUI && + phydev->interface != PHY_INTERFACE_MODE_RXAUI && + phydev->interface != PHY_INTERFACE_MODE_10GKR) + return -ENODEV; + + __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported); + __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported); + + if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) { + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (val < 0) + return val; + + if (val & MDIO_AN_STAT1_ABLE) + __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported); + } + + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2); + if (val < 0) + return val; + + /* Ethtool does not support the WAN mode bits */ + if (val & (MDIO_PMA_STAT2_10GBSR | MDIO_PMA_STAT2_10GBLR | + MDIO_PMA_STAT2_10GBER | MDIO_PMA_STAT2_10GBLX4 | + MDIO_PMA_STAT2_10GBSW | MDIO_PMA_STAT2_10GBLW | + MDIO_PMA_STAT2_10GBEW)) + __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported); + if (val & MDIO_PMA_STAT2_10GBSR) + __set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, supported); + if (val & MDIO_PMA_STAT2_10GBLR) + __set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, supported); + if (val & MDIO_PMA_STAT2_10GBER) + __set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, supported); + + if (val & MDIO_PMA_STAT2_EXTABLE) { + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE); + if (val < 0) + return val; + + if (val & (MDIO_PMA_EXTABLE_10GBT | MDIO_PMA_EXTABLE_1000BT | + MDIO_PMA_EXTABLE_100BTX | MDIO_PMA_EXTABLE_10BT)) + __set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported); + if (val & MDIO_PMA_EXTABLE_10GBLRM) + __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported); + if (val & (MDIO_PMA_EXTABLE_10GBKX4 | MDIO_PMA_EXTABLE_10GBKR | + MDIO_PMA_EXTABLE_1000BKX)) + __set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, supported); + if (val & MDIO_PMA_EXTABLE_10GBLRM) + __set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_10GBT) + __set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_10GBKX4) + __set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_10GBKR) + __set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_1000BT) + __set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_1000BKX) + __set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_100BTX) + __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, + supported); + if (val & MDIO_PMA_EXTABLE_10BT) + __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, + supported); + } + + if (!ethtool_convert_link_mode_to_legacy_u32(&mask, supported)) + dev_warn(&phydev->mdio.dev, + "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n", + __ETHTOOL_LINK_MODE_MASK_NBITS, supported); + + phydev->supported &= mask; + phydev->advertising &= phydev->supported; + + return 0; +} + +static int mv3310_config_aneg(struct phy_device *phydev) +{ + bool changed = false; + u32 advertising; + int ret; + + if (phydev->autoneg == AUTONEG_DISABLE) { + ret = genphy_c45_pma_setup_forced(phydev); + if (ret < 0) + return ret; + + return genphy_c45_an_disable_aneg(phydev); + } + + phydev->advertising &= phydev->supported; + advertising = phydev->advertising; + + ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_100BASE4 | + ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, + ethtool_adv_to_mii_adv_t(advertising)); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + ret = mv3310_modify(phydev, MDIO_MMD_AN, MV_AN_CTRL1000, + ADVERTISE_1000FULL | ADVERTISE_1000HALF, + ethtool_adv_to_mii_ctrl1000_t(advertising)); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + /* 10G control register */ + ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV10G, + advertising & ADVERTISED_10000baseT_Full ? + MDIO_AN_10GBT_CTRL_ADV10G : 0); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + if (changed) + ret = genphy_c45_restart_aneg(phydev); + + return ret; +} + +static int mv3310_aneg_done(struct phy_device *phydev) +{ + int val; + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1); + if (val < 0) + return val; + + if (val & MDIO_STAT1_LSTATUS) + return 1; + + return genphy_c45_aneg_done(phydev); +} + +/* 10GBASE-ER,LR,LRM,SR do not support autonegotiation. */ +static int mv3310_read_10gbr_status(struct phy_device *phydev) +{ + phydev->link = 1; + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) + phydev->interface = PHY_INTERFACE_MODE_10GKR; + + return 0; +} + +static int mv3310_read_status(struct phy_device *phydev) +{ + u32 mmd_mask = phydev->c45_ids.devices_in_package; + int val; + + /* The vendor devads do not report link status. Avoid the PHYXS + * instance as there are three, and its status depends on the MAC + * being appropriately configured for the negotiated speed. + */ + mmd_mask &= ~(BIT(MDIO_MMD_VEND1) | BIT(MDIO_MMD_VEND2) | + BIT(MDIO_MMD_PHYXS)); + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->lp_advertising = 0; + phydev->link = 0; + phydev->pause = 0; + phydev->asym_pause = 0; + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1); + if (val < 0) + return val; + + if (val & MDIO_STAT1_LSTATUS) + return mv3310_read_10gbr_status(phydev); + + val = genphy_c45_read_link(phydev, mmd_mask); + if (val < 0) + return val; + + phydev->link = val > 0 ? 1 : 0; + + val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (val < 0) + return val; + + if (val & MDIO_AN_STAT1_COMPLETE) { + val = genphy_c45_read_lpa(phydev); + if (val < 0) + return val; + + /* Read the link partner's 1G advertisment */ + val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_STAT1000); + if (val < 0) + return val; + + phydev->lp_advertising |= mii_stat1000_to_ethtool_lpa_t(val); + + if (phydev->autoneg == AUTONEG_ENABLE) { + val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_RESULT); + if (val < 0) + return val; + + if (val & MV_AN_RESULT_SPD_10000) + phydev->speed = SPEED_10000; + else if (val & MV_AN_RESULT_SPD_1000) + phydev->speed = SPEED_1000; + else if (val & MV_AN_RESULT_SPD_100) + phydev->speed = SPEED_100; + else if (val & MV_AN_RESULT_SPD_10) + phydev->speed = SPEED_10; + + phydev->duplex = DUPLEX_FULL; + } + } + + if (phydev->autoneg != AUTONEG_ENABLE) { + val = genphy_c45_read_pma(phydev); + if (val < 0) + return val; + } + + if ((phydev->interface == PHY_INTERFACE_MODE_SGMII || + phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) { + /* The PHY automatically switches its serdes interface (and + * active PHYXS instance) between Cisco SGMII and 10GBase-KR + * modes according to the speed. Florian suggests setting + * phydev->interface to communicate this to the MAC. Only do + * this if we are already in either SGMII or 10GBase-KR mode. + */ + if (phydev->speed == SPEED_10000) + phydev->interface = PHY_INTERFACE_MODE_10GKR; + else if (phydev->speed >= SPEED_10 && + phydev->speed < SPEED_10000) + phydev->interface = PHY_INTERFACE_MODE_SGMII; + } + + return 0; +} + +static struct phy_driver mv3310_drivers[] = { + { + .phy_id = 0x002b09aa, + .phy_id_mask = 0xffffffff, + .name = "mv88x3310", + .features = SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP | + SUPPORTED_FIBRE | + SUPPORTED_10000baseT_Full | + SUPPORTED_Backplane, + .probe = mv3310_probe, + .soft_reset = mv3310_soft_reset, + .config_init = mv3310_config_init, + .config_aneg = mv3310_config_aneg, + .aneg_done = mv3310_aneg_done, + .read_status = mv3310_read_status, + }, +}; + +module_phy_driver(mv3310_drivers); + +static struct mdio_device_id __maybe_unused mv3310_tbl[] = { + { 0x002b09aa, 0xffffffff }, + { }, +}; +MODULE_DEVICE_TABLE(mdio, mv3310_tbl); +MODULE_DESCRIPTION("Marvell Alaska X 10Gigabit Ethernet PHY driver (MV88X3310)"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3