From 27d916d680e7b324087a75d080f215e7c34a4e8f Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 19 Nov 2010 11:58:52 +0000 Subject: phylib: Use common page register definition for Marvell PHYs. The definition of the Marvell PHY page register is not specific to 88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it throughout. Suggested-by: Cyril Chemparathy Signed-off-by: David Daney Cc: Cyril Chemparathy Cc: Arnaud Patard Cc: Benjamin Herrenschmidt Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index f0bd1a1aba3a..3600b8b21bf2 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -35,6 +35,8 @@ #include #include +#define MII_MARVELL_PHY_PAGE 22 + #define MII_M1011_IEVENT 0x13 #define MII_M1011_IEVENT_CLEAR 0x0000 @@ -80,7 +82,6 @@ #define MII_88E1121_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_PAGE 3 #define MII_88E1121_PHY_LED_DEF 0x0030 -#define MII_88E1121_PHY_PAGE 22 #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 @@ -190,9 +191,9 @@ static int m88e1121_config_aneg(struct phy_device *phydev) { int err, oldpage, mscr; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - err = phy_write(phydev, MII_88E1121_PHY_PAGE, + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_MSCR_PAGE); if (err < 0) return err; @@ -218,7 +219,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev) return err; } - phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); err = phy_write(phydev, MII_BMCR, BMCR_RESET); if (err < 0) @@ -229,11 +230,11 @@ static int m88e1121_config_aneg(struct phy_device *phydev) if (err < 0) return err; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); - phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); err = genphy_config_aneg(phydev); @@ -244,9 +245,9 @@ static int m88e1318_config_aneg(struct phy_device *phydev) { int err, oldpage, mscr; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - err = phy_write(phydev, MII_88E1121_PHY_PAGE, + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_MSCR_PAGE); if (err < 0) return err; @@ -258,7 +259,7 @@ static int m88e1318_config_aneg(struct phy_device *phydev) if (err < 0) return err; - err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); if (err < 0) return err; @@ -398,7 +399,7 @@ static int m88e1118_config_init(struct phy_device *phydev) int err; /* Change address */ - err = phy_write(phydev, 0x16, 0x0002); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002); if (err < 0) return err; @@ -408,7 +409,7 @@ static int m88e1118_config_init(struct phy_device *phydev) return err; /* Change address */ - err = phy_write(phydev, 0x16, 0x0003); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003); if (err < 0) return err; @@ -421,7 +422,7 @@ static int m88e1118_config_init(struct phy_device *phydev) return err; /* Reset address */ - err = phy_write(phydev, 0x16, 0x0); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); if (err < 0) return err; -- cgit v1.2.3 From 90600732d8b2fbc422bc9c57bdc73513d909367f Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 19 Nov 2010 11:58:53 +0000 Subject: phylib: Add support for Marvell 88E1149R devices. The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY. The .config_aneg function can be shared with 88E1118, but it needs its own .config_init. Signed-off-by: David Daney Cc: Cyril Chemparathy Cc: Arnaud Patard Cc: Benjamin Herrenschmidt Cc: Wolfram Sang Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 40 ++++++++++++++++++++++++++++++++++++++++ include/linux/marvell_phy.h | 1 + 2 files changed, 41 insertions(+) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 3600b8b21bf2..def19d7c53ef 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -433,6 +433,32 @@ static int m88e1118_config_init(struct phy_device *phydev) return 0; } +static int m88e1149_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1048); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + static int m88e1145_config_init(struct phy_device *phydev) { int err; @@ -685,6 +711,19 @@ static struct phy_driver marvell_drivers[] = { .config_intr = &marvell_config_intr, .driver = { .owner = THIS_MODULE }, }, + { + .phy_id = MARVELL_PHY_ID_88E1149R, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1149R", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1149_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = { .owner = THIS_MODULE }, + }, { .phy_id = MARVELL_PHY_ID_88E1240, .phy_id_mask = MARVELL_PHY_ID_MASK, @@ -736,6 +775,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { { 0x01410e10, 0xfffffff0 }, { 0x01410cb0, 0xfffffff0 }, { 0x01410cd0, 0xfffffff0 }, + { 0x01410e50, 0xfffffff0 }, { 0x01410e30, 0xfffffff0 }, { 0x01410e90, 0xfffffff0 }, { } diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h index 1ff81b51b656..dd3c34ebca9a 100644 --- a/include/linux/marvell_phy.h +++ b/include/linux/marvell_phy.h @@ -11,6 +11,7 @@ #define MARVELL_PHY_ID_88E1118 0x01410e10 #define MARVELL_PHY_ID_88E1121R 0x01410cb0 #define MARVELL_PHY_ID_88E1145 0x01410cd0 +#define MARVELL_PHY_ID_88E1149R 0x01410e50 #define MARVELL_PHY_ID_88E1240 0x01410e30 #define MARVELL_PHY_ID_88E1318S 0x01410e90 -- cgit v1.2.3 From cf41a51db89850033efc11c18a5257de810b5417 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 19 Nov 2010 12:13:18 +0000 Subject: of/phylib: Use device tree properties to initialize Marvell PHYs. Some aspects of PHY initialization are board dependent, things like indicator LED connections and some clocking modes cannot be determined by probing. The dev_flags element of struct phy_device can be used to control these things if an appropriate value can be passed from the Ethernet driver. We run into problems however if the PHY connections are specified by the device tree. There is no way for the Ethernet driver to know what flags it should pass. If we are using the device tree, the struct phy_device will be populated with the device tree node corresponding to the PHY, and we can extract extra configuration information from there. The next question is what should the format of that information be? It is highly device specific, and the device tree representation should not be tied to any arbitrary kernel defined constants. A straight forward representation is just to specify the exact bits that should be set using the "marvell,reg-init" property: phy5: ethernet-phy@5 { reg = <5>; compatible = "marvell,88e1149r"; marvell,reg-init = /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */ <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */ /* mix %:0, led[0123]:drive low off hiZ */ <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */ /* default blink periods. */ <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */ /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */ <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */ }; phy6: ethernet-phy@6 { reg = <6>; compatible = "marvell,88e1118"; marvell,reg-init = /* Fix rx and tx clock transition timing */ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */ /* Adjust LED drive. */ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */ /* irq, blink-activity, blink-link */ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */ }; The Marvell PHYs have a page select register at register 22 (0x16), we can specify any register by its page and register number. These are the first and second word. The third word contains a mask to be ANDed with the existing register value, and the fourth word is ORed with the result to yield the new register value. The new marvell_of_reg_init function leaves the page select register unchanged, so a call to it can be dropped into the .config_init functions without unduly affecting the state of the PHY. If CONFIG_OF_MDIO is not set, there is no of_node, or no "marvell,reg-init" property, the PHY initialization is unchanged. Signed-off-by: David Daney Cc: Grant Likely Cc: Cyril Chemparathy Cc: David Daney Cc: Arnaud Patard Cc: Benjamin Herrenschmidt Reviewed-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 97 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index def19d7c53ef..e8b9c53c304b 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -187,6 +188,87 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +#ifdef CONFIG_OF_MDIO +/* + * Set and/or override some configuration registers based on the + * marvell,reg-init property stored in the of_node for the phydev. + * + * marvell,reg-init = ,...; + * + * There may be one or more sets of : + * + * reg-page: which register bank to use. + * reg: the register. + * mask: if non-zero, ANDed with existing register value. + * value: ORed with the masked value and written to the regiser. + * + */ +static int marvell_of_reg_init(struct phy_device *phydev) +{ + const __be32 *paddr; + int len, i, saved_page, current_page, page_changed, ret; + + if (!phydev->dev.of_node) + return 0; + + paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len); + if (!paddr || len < (4 * sizeof(*paddr))) + return 0; + + saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE); + if (saved_page < 0) + return saved_page; + page_changed = 0; + current_page = saved_page; + + ret = 0; + len /= sizeof(*paddr); + for (i = 0; i < len - 3; i += 4) { + u16 reg_page = be32_to_cpup(paddr + i); + u16 reg = be32_to_cpup(paddr + i + 1); + u16 mask = be32_to_cpup(paddr + i + 2); + u16 val_bits = be32_to_cpup(paddr + i + 3); + int val; + + if (reg_page != current_page) { + current_page = reg_page; + page_changed = 1; + ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page); + if (ret < 0) + goto err; + } + + val = 0; + if (mask) { + val = phy_read(phydev, reg); + if (val < 0) { + ret = val; + goto err; + } + val &= mask; + } + val |= val_bits; + + ret = phy_write(phydev, reg, val); + if (ret < 0) + goto err; + + } +err: + if (page_changed) { + i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page); + if (ret == 0) + ret = i; + } + return ret; +} +#else +static int marvell_of_reg_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ + static int m88e1121_config_aneg(struct phy_device *phydev) { int err, oldpage, mscr; @@ -369,6 +451,9 @@ static int m88e1111_config_init(struct phy_device *phydev) return err; } + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; err = phy_write(phydev, MII_BMCR, BMCR_RESET); if (err < 0) @@ -421,6 +506,10 @@ static int m88e1118_config_init(struct phy_device *phydev) if (err < 0) return err; + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + /* Reset address */ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); if (err < 0) @@ -447,6 +536,10 @@ static int m88e1149_config_init(struct phy_device *phydev) if (err < 0) return err; + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + /* Reset address */ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); if (err < 0) @@ -518,6 +611,10 @@ static int m88e1145_config_init(struct phy_device *phydev) } } + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + return 0; } -- cgit v1.2.3