From 5d3213cc8f4d6244b76ee0c4ab73a97d5d2ee956 Mon Sep 17 00:00:00 2001 From: Ananda Raju Date: Fri, 21 Apr 2006 19:23:26 -0400 Subject: [PATCH] s2io: init/shutdown fixes Hi, The following patch contains fix related to init and shutdown of adapter as per user guide. The list of changes include 1. shutdown gracefully. 2. Need to mask/unmask interrupts in ISR required fro Xframe-E 3. Tx FIFO should be enabled after WRR calender programming Signed-off-by: Ananda Raju Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 203 ++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 187 insertions(+), 16 deletions(-) (limited to 'drivers/net/s2io.c') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ae79c4cfefcc..4e9998181403 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -77,7 +77,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "2.0.11.2" +#define DRV_VERSION "2.0.14.2" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; @@ -1036,11 +1036,6 @@ static int init_nic(struct s2io_nic *nic) } } - /* Enable Tx FIFO partition 0. */ - val64 = readq(&bar0->tx_fifo_partition_0); - val64 |= BIT(0); /* To enable the FIFO partition. */ - writeq(val64, &bar0->tx_fifo_partition_0); - /* * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug * SXE-008 TRANSMIT DMA ARBITRATION ISSUE. @@ -1219,6 +1214,11 @@ static int init_nic(struct s2io_nic *nic) break; } + /* Enable Tx FIFO partition 0. */ + val64 = readq(&bar0->tx_fifo_partition_0); + val64 |= (TX_FIFO_PARTITION_EN); + writeq(val64, &bar0->tx_fifo_partition_0); + /* Filling the Rx round robin registers as per the * number of Rings and steering based on QoS. */ @@ -2188,7 +2188,7 @@ static void stop_nic(struct s2io_nic *nic) { XENA_dev_config_t __iomem *bar0 = nic->bar0; register u64 val64 = 0; - u16 interruptible, i; + u16 interruptible; mac_info_t *mac_control; struct config_param *config; @@ -2201,12 +2201,10 @@ static void stop_nic(struct s2io_nic *nic) interruptible |= TX_MAC_INTR | RX_MAC_INTR; en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); - /* Disable PRCs */ - for (i = 0; i < config->rx_ring_num; i++) { - val64 = readq(&bar0->prc_ctrl_n[i]); - val64 &= ~((u64) PRC_CTRL_RC_ENABLED); - writeq(val64, &bar0->prc_ctrl_n[i]); - } + /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */ + val64 = readq(&bar0->adapter_control); + val64 &= ~(ADAPTER_CNTL_EN); + writeq(val64, &bar0->adapter_control); } static int fill_rxd_3buf(nic_t *nic, RxD_t *rxdp, struct sk_buff *skb) @@ -2285,7 +2283,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) alloc_cnt = mac_control->rings[ring_no].pkt_cnt - atomic_read(&nic->rx_bufs_left[ring_no]); - block_no1 = mac_control->rings[ring_no].rx_curr_get_info.block_index; + block_no1 = mac_control->rings[ring_no].rx_curr_get_info.block_index; off1 = mac_control->rings[ring_no].rx_curr_get_info.offset; while (alloc_tab < alloc_cnt) { block_no = mac_control->rings[ring_no].rx_curr_put_info. @@ -4232,7 +4230,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) nic_t *sp = dev->priv; XENA_dev_config_t __iomem *bar0 = sp->bar0; int i; - u64 reason = 0, val64; + u64 reason = 0, val64, org_mask; mac_info_t *mac_control; struct config_param *config; @@ -4257,6 +4255,10 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) } val64 = 0xFFFFFFFFFFFFFFFFULL; + /* Store current mask before masking all interrupts */ + org_mask = readq(&bar0->general_int_mask); + writeq(val64, &bar0->general_int_mask); + #ifdef CONFIG_S2IO_NAPI if (reason & GEN_INTR_RXTRAFFIC) { if (netif_rx_schedule_prep(dev)) { @@ -4312,6 +4314,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) DBG_PRINT(ERR_DBG, " in ISR!!\n"); clear_bit(0, (&sp->tasklet_status)); atomic_dec(&sp->isr_cnt); + writeq(org_mask, &bar0->general_int_mask); return IRQ_HANDLED; } clear_bit(0, (&sp->tasklet_status)); @@ -4327,7 +4330,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) } } #endif - + writeq(org_mask, &bar0->general_int_mask); atomic_dec(&sp->isr_cnt); return IRQ_HANDLED; } @@ -6011,6 +6014,165 @@ static void s2io_set_link(unsigned long data) clear_bit(0, &(nic->link_state)); } +static int set_rxd_buffer_pointer(nic_t *sp, RxD_t *rxdp, buffAdd_t *ba, + struct sk_buff **skb, u64 *temp0, u64 *temp1, + u64 *temp2, int size) +{ + struct net_device *dev = sp->dev; + struct sk_buff *frag_list; + + if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) { + /* allocate skb */ + if (*skb) { + DBG_PRINT(INFO_DBG, "SKB is not NULL\n"); + /* + * As Rx frame are not going to be processed, + * using same mapped address for the Rxd + * buffer pointer + */ + ((RxD1_t*)rxdp)->Buffer0_ptr = *temp0; + } else { + *skb = dev_alloc_skb(size); + if (!(*skb)) { + DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name); + DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n"); + return -ENOMEM ; + } + /* storing the mapped addr in a temp variable + * such it will be used for next rxd whose + * Host Control is NULL + */ + ((RxD1_t*)rxdp)->Buffer0_ptr = *temp0 = + pci_map_single( sp->pdev, (*skb)->data, + size - NET_IP_ALIGN, + PCI_DMA_FROMDEVICE); + rxdp->Host_Control = (unsigned long) (*skb); + } + } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) { + /* Two buffer Mode */ + if (*skb) { + ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2; + ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0; + ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1; + } else { + *skb = dev_alloc_skb(size); + ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 = + pci_map_single(sp->pdev, (*skb)->data, + dev->mtu + 4, + PCI_DMA_FROMDEVICE); + ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0 = + pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN, + PCI_DMA_FROMDEVICE); + rxdp->Host_Control = (unsigned long) (*skb); + + /* Buffer-1 will be dummy buffer not used */ + ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1 = + pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN, + PCI_DMA_FROMDEVICE); + } + } else if ((rxdp->Host_Control == 0)) { + /* Three buffer mode */ + if (*skb) { + ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0; + ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1; + ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2; + } else { + *skb = dev_alloc_skb(size); + + ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0 = + pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN, + PCI_DMA_FROMDEVICE); + /* Buffer-1 receives L3/L4 headers */ + ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1 = + pci_map_single( sp->pdev, (*skb)->data, + l3l4hdr_size + 4, + PCI_DMA_FROMDEVICE); + /* + * skb_shinfo(skb)->frag_list will have L4 + * data payload + */ + skb_shinfo(*skb)->frag_list = dev_alloc_skb(dev->mtu + + ALIGN_SIZE); + if (skb_shinfo(*skb)->frag_list == NULL) { + DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb \ + failed\n ", dev->name); + return -ENOMEM ; + } + frag_list = skb_shinfo(*skb)->frag_list; + frag_list->next = NULL; + /* + * Buffer-2 receives L4 data payload + */ + ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 = + pci_map_single( sp->pdev, frag_list->data, + dev->mtu, PCI_DMA_FROMDEVICE); + } + } + return 0; +} +static void set_rxd_buffer_size(nic_t *sp, RxD_t *rxdp, int size) +{ + struct net_device *dev = sp->dev; + if (sp->rxd_mode == RXD_MODE_1) { + rxdp->Control_2 = SET_BUFFER0_SIZE_1( size - NET_IP_ALIGN); + } else if (sp->rxd_mode == RXD_MODE_3B) { + rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); + rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1); + rxdp->Control_2 |= SET_BUFFER2_SIZE_3( dev->mtu + 4); + } else { + rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); + rxdp->Control_2 |= SET_BUFFER1_SIZE_3(l3l4hdr_size + 4); + rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu); + } +} + +static int rxd_owner_bit_reset(nic_t *sp) +{ + int i, j, k, blk_cnt = 0, size; + mac_info_t * mac_control = &sp->mac_control; + struct config_param *config = &sp->config; + struct net_device *dev = sp->dev; + RxD_t *rxdp = NULL; + struct sk_buff *skb = NULL; + buffAdd_t *ba = NULL; + u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0; + + /* Calculate the size based on ring mode */ + size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE + + HEADER_802_2_SIZE + HEADER_SNAP_SIZE; + if (sp->rxd_mode == RXD_MODE_1) + size += NET_IP_ALIGN; + else if (sp->rxd_mode == RXD_MODE_3B) + size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4; + else + size = l3l4hdr_size + ALIGN_SIZE + BUF0_LEN + 4; + + for (i = 0; i < config->rx_ring_num; i++) { + blk_cnt = config->rx_cfg[i].num_rxd / + (rxd_count[sp->rxd_mode] +1); + + for (j = 0; j < blk_cnt; j++) { + for (k = 0; k < rxd_count[sp->rxd_mode]; k++) { + rxdp = mac_control->rings[i]. + rx_blocks[j].rxds[k].virt_addr; + if(sp->rxd_mode >= RXD_MODE_3A) + ba = &mac_control->rings[i].ba[j][k]; + set_rxd_buffer_pointer(sp, rxdp, ba, + &skb,(u64 *)&temp0_64, + (u64 *)&temp1_64, + (u64 *)&temp2_64, size); + + set_rxd_buffer_size(sp, rxdp, size); + wmb(); + /* flip the Ownership bit to Hardware */ + rxdp->Control_1 |= RXD_OWN_XENA; + } + } + } + return 0; + +} + static void s2io_card_down(nic_t * sp, int flag) { int cnt = 0; @@ -6064,6 +6226,15 @@ static void s2io_card_down(nic_t * sp, int flag) /* Check if the device is Quiescent and then Reset the NIC */ do { + /* As per the HW requirement we need to replenish the + * receive buffer to avoid the ring bump. Since there is + * no intention of processing the Rx frame at this pointwe are + * just settting the ownership bit of rxd in Each Rx + * ring to HW and set the appropriate buffer size + * based on the ring mode + */ + rxd_owner_bit_reset(sp); + val64 = readq(&bar0->adapter_status); if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) { break; -- cgit v1.2.3