From e69647a19c870c2f919e4d5023af8a515e8ef25f Mon Sep 17 00:00:00 2001 From: Raghuram Chary J Date: Fri, 23 Mar 2018 15:48:08 +0530 Subject: lan78xx: Set ASD in MAC_CR when EEE is enabled. Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net/usb/lan78xx.c') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 60a604cc7647..90d176279152 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2351,6 +2351,7 @@ static int lan78xx_reset(struct lan78xx_net *dev) u32 buf; int ret = 0; unsigned long timeout; + u8 sig; ret = lan78xx_read_reg(dev, HW_CFG, &buf); buf |= HW_CFG_LRST_; @@ -2450,6 +2451,15 @@ static int lan78xx_reset(struct lan78xx_net *dev) /* LAN7801 only has RGMII mode */ if (dev->chipid == ID_REV_CHIP_ID_7801_) buf &= ~MAC_CR_GMII_EN_; + + if (dev->chipid == ID_REV_CHIP_ID_7800_) { + ret = lan78xx_read_raw_eeprom(dev, 0, 1, &sig); + if (!ret && sig != EEPROM_INDICATOR) { + /* Implies there is no external eeprom. Set mac speed */ + netdev_info(dev->net, "No External EEPROM. Setting MAC Speed\n"); + buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_; + } + } ret = lan78xx_write_reg(dev, MAC_CR, buf); ret = lan78xx_read_reg(dev, MAC_TX, &buf); -- cgit v1.2.3 From 2d2d99ec13f62d5d2cecb6169dfdb6bbe05356d0 Mon Sep 17 00:00:00 2001 From: Raghuram Chary J Date: Tue, 27 Mar 2018 14:51:16 +0530 Subject: lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write) Description: Crash was reported with syzkaller pointing to lan78xx_write_reg routine. Root-cause: Proper cleanup of workqueues and init/setup routines was not happening in failure conditions. Fix: Handled the error conditions by cleaning up the queues and init/setup routines. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Reported-by: Andrey Konovalov Signed-off-by: Raghuram Chary J Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers/net/usb/lan78xx.c') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 90d176279152..55a78eb96961 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2873,8 +2873,7 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) if (ret < 0) { netdev_warn(dev->net, "lan78xx_setup_irq_domain() failed : %d", ret); - kfree(pdata); - return ret; + goto out1; } dev->net->hard_header_len += TX_OVERHEAD; @@ -2882,14 +2881,32 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) /* Init all registers */ ret = lan78xx_reset(dev); + if (ret) { + netdev_warn(dev->net, "Registers INIT FAILED...."); + goto out2; + } ret = lan78xx_mdio_init(dev); + if (ret) { + netdev_warn(dev->net, "MDIO INIT FAILED....."); + goto out2; + } dev->net->flags |= IFF_MULTICAST; pdata->wol = WAKE_MAGIC; return ret; + +out2: + lan78xx_remove_irq_domain(dev); + +out1: + netdev_warn(dev->net, "Bind routine FAILED"); + cancel_work_sync(&pdata->set_multicast); + cancel_work_sync(&pdata->set_vlan); + kfree(pdata); + return ret; } static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf) @@ -2901,6 +2918,8 @@ static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf) lan78xx_remove_mdio(dev); if (pdata) { + cancel_work_sync(&pdata->set_multicast); + cancel_work_sync(&pdata->set_vlan); netif_dbg(dev, ifdown, dev->net, "free pdata"); kfree(pdata); pdata = NULL; -- cgit v1.2.3