From 4bc85c1324aaa4a8bb0171e332ff762b6230bdfe Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 21 Feb 2011 11:11:05 -0800 Subject: Revert "iwlwifi: split the drivers for agn and legacy devices 3945/4965" This reverts commit aa833c4b1a928b8d3c4fcc2faaa0d6b81ea02b56. --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 4334 +++++++++++++++++++++++++++ 1 file changed, 4334 insertions(+) create mode 100644 drivers/net/wireless/iwlwifi/iwl3945-base.c (limited to 'drivers/net/wireless/iwlwifi/iwl3945-base.c') diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c new file mode 100644 index 000000000000..adcef735180a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -0,0 +1,4334 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define DRV_NAME "iwl3945" + +#include "iwl-fh.h" +#include "iwl-3945-fh.h" +#include "iwl-commands.h" +#include "iwl-sta.h" +#include "iwl-3945.h" +#include "iwl-core.h" +#include "iwl-helpers.h" +#include "iwl-dev.h" +#include "iwl-spectrum.h" +#include "iwl-legacy.h" + +/* + * module name, copyright, version, etc. + */ + +#define DRV_DESCRIPTION \ +"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux" + +#ifdef CONFIG_IWLWIFI_DEBUG +#define VD "d" +#else +#define VD +#endif + +/* + * add "s" to indicate spectrum measurement included. + * we add it here to be consistent with previous releases in which + * this was configurable. + */ +#define DRV_VERSION IWLWIFI_VERSION VD "s" +#define DRV_COPYRIGHT "Copyright(c) 2003-2010 Intel Corporation" +#define DRV_AUTHOR "" + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); +MODULE_LICENSE("GPL"); + + /* module parameters */ +struct iwl_mod_params iwl3945_mod_params = { + .sw_crypto = 1, + .restart_fw = 1, + /* the rest are 0 by default */ +}; + +/** + * iwl3945_get_antenna_flags - Get antenna flags for RXON command + * @priv: eeprom and antenna fields are used to determine antenna flags + * + * priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed + * iwl3945_mod_params.antenna specifies the antenna diversity mode: + * + * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself + * IWL_ANTENNA_MAIN - Force MAIN antenna + * IWL_ANTENNA_AUX - Force AUX antenna + */ +__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv) +{ + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + + switch (iwl3945_mod_params.antenna) { + case IWL_ANTENNA_DIVERSITY: + return 0; + + case IWL_ANTENNA_MAIN: + if (eeprom->antenna_switch_type) + return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; + return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; + + case IWL_ANTENNA_AUX: + if (eeprom->antenna_switch_type) + return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; + return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; + } + + /* bad antenna selector value */ + IWL_ERR(priv, "Bad antenna selector value (0x%x)\n", + iwl3945_mod_params.antenna); + + return 0; /* "diversity" is default if error */ +} + +static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, + u8 sta_id) +{ + unsigned long flags; + __le16 key_flags = 0; + int ret; + + key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + + if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id) + key_flags |= STA_KEY_MULTICAST_MSK; + + keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + keyconf->hw_key_idx = keyconf->keyidx; + key_flags &= ~STA_KEY_FLG_INVALID; + + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].keyinfo.cipher = keyconf->cipher; + priv->stations[sta_id].keyinfo.keylen = keyconf->keylen; + memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, + keyconf->keylen); + + memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, + keyconf->keylen); + + if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + == STA_KEY_FLG_NO_ENC) + priv->stations[sta_id].sta.key.key_offset = + iwl_get_free_ucode_key_index(priv); + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ + + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for a new key"); + + priv->stations[sta_id].sta.key.key_flags = key_flags; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + + IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n"); + + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + + spin_unlock_irqrestore(&priv->sta_lock, flags); + + return ret; +} + +static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, + u8 sta_id) +{ + return -EOPNOTSUPP; +} + +static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, + u8 sta_id) +{ + return -EOPNOTSUPP; +} + +static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id) +{ + unsigned long flags; + struct iwl_addsta_cmd sta_cmd; + + spin_lock_irqsave(&priv->sta_lock, flags); + memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key)); + memset(&priv->stations[sta_id].sta.key, 0, + sizeof(struct iwl4965_keyinfo)); + priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); + spin_unlock_irqrestore(&priv->sta_lock, flags); + + IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n"); + return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); +} + +static int iwl3945_set_dynamic_key(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, u8 sta_id) +{ + int ret = 0; + + keyconf->hw_key_idx = HW_KEY_DYNAMIC; + + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_CCMP: + ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id); + break; + case WLAN_CIPHER_SUITE_TKIP: + ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id); + break; + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id); + break; + default: + IWL_ERR(priv, "Unknown alg: %s alg=%x\n", __func__, + keyconf->cipher); + ret = -EINVAL; + } + + IWL_DEBUG_WEP(priv, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n", + keyconf->cipher, keyconf->keylen, keyconf->keyidx, + sta_id, ret); + + return ret; +} + +static int iwl3945_remove_static_key(struct iwl_priv *priv) +{ + int ret = -EOPNOTSUPP; + + return ret; +} + +static int iwl3945_set_static_key(struct iwl_priv *priv, + struct ieee80211_key_conf *key) +{ + if (key->cipher == WLAN_CIPHER_SUITE_WEP40 || + key->cipher == WLAN_CIPHER_SUITE_WEP104) + return -EOPNOTSUPP; + + IWL_ERR(priv, "Static key invalid: cipher %x\n", key->cipher); + return -EINVAL; +} + +static void iwl3945_clear_free_frames(struct iwl_priv *priv) +{ + struct list_head *element; + + IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n", + priv->frames_count); + + while (!list_empty(&priv->free_frames)) { + element = priv->free_frames.next; + list_del(element); + kfree(list_entry(element, struct iwl3945_frame, list)); + priv->frames_count--; + } + + if (priv->frames_count) { + IWL_WARN(priv, "%d frames still in use. Did we lose one?\n", + priv->frames_count); + priv->frames_count = 0; + } +} + +static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl_priv *priv) +{ + struct iwl3945_frame *frame; + struct list_head *element; + if (list_empty(&priv->free_frames)) { + frame = kzalloc(sizeof(*frame), GFP_KERNEL); + if (!frame) { + IWL_ERR(priv, "Could not allocate frame!\n"); + return NULL; + } + + priv->frames_count++; + return frame; + } + + element = priv->free_frames.next; + list_del(element); + return list_entry(element, struct iwl3945_frame, list); +} + +static void iwl3945_free_frame(struct iwl_priv *priv, struct iwl3945_frame *frame) +{ + memset(frame, 0, sizeof(*frame)); + list_add(&frame->list, &priv->free_frames); +} + +unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + int left) +{ + + if (!iwl_is_associated(priv, IWL_RXON_CTX_BSS) || !priv->beacon_skb) + return 0; + + if (priv->beacon_skb->len > left) + return 0; + + memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len); + + return priv->beacon_skb->len; +} + +static int iwl3945_send_beacon_cmd(struct iwl_priv *priv) +{ + struct iwl3945_frame *frame; + unsigned int frame_size; + int rc; + u8 rate; + + frame = iwl3945_get_free_frame(priv); + + if (!frame) { + IWL_ERR(priv, "Could not obtain free frame buffer for beacon " + "command.\n"); + return -ENOMEM; + } + + rate = iwl_rate_get_lowest_plcp(priv, + &priv->contexts[IWL_RXON_CTX_BSS]); + + frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate); + + rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, + &frame->u.cmd[0]); + + iwl3945_free_frame(priv, frame); + + return rc; +} + +static void iwl3945_unset_hw_params(struct iwl_priv *priv) +{ + if (priv->_3945.shared_virt) + dma_free_coherent(&priv->pci_dev->dev, + sizeof(struct iwl3945_shared), + priv->_3945.shared_virt, + priv->_3945.shared_phys); +} + +static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv, + struct ieee80211_tx_info *info, + struct iwl_device_cmd *cmd, + struct sk_buff *skb_frag, + int sta_id) +{ + struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload; + struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo; + + tx_cmd->sec_ctl = 0; + + switch (keyinfo->cipher) { + case WLAN_CIPHER_SUITE_CCMP: + tx_cmd->sec_ctl = TX_CMD_SEC_CCM; + memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen); + IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n"); + break; + + case WLAN_CIPHER_SUITE_TKIP: + break; + + case WLAN_CIPHER_SUITE_WEP104: + tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; + /* fall through */ + case WLAN_CIPHER_SUITE_WEP40: + tx_cmd->sec_ctl |= TX_CMD_SEC_WEP | + (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT; + + memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen); + + IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption " + "with key %d\n", info->control.hw_key->hw_key_idx); + break; + + default: + IWL_ERR(priv, "Unknown encode cipher %x\n", keyinfo->cipher); + break; + } +} + +/* + * handle build REPLY_TX command notification. + */ +static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv, + struct iwl_device_cmd *cmd, + struct ieee80211_tx_info *info, + struct ieee80211_hdr *hdr, u8 std_id) +{ + struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload; + __le32 tx_flags = tx_cmd->tx_flags; + __le16 fc = hdr->frame_control; + + tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { + tx_flags |= TX_CMD_FLG_ACK_MSK; + if (ieee80211_is_mgmt(fc)) + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + if (ieee80211_is_probe_resp(fc) && + !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) + tx_flags |= TX_CMD_FLG_TSF_MSK; + } else { + tx_flags &= (~TX_CMD_FLG_ACK_MSK); + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + } + + tx_cmd->sta_id = std_id; + if (ieee80211_has_morefrags(fc)) + tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; + + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tx_cmd->tid_tspec = qc[0] & 0xf; + tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; + } else { + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + } + + priv->cfg->ops->utils->tx_cmd_protection(priv, info, fc, &tx_flags); + + tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); + if (ieee80211_is_mgmt(fc)) { + if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) + tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); + else + tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); + } else { + tx_cmd->timeout.pm_frame_timeout = 0; + } + + tx_cmd->driver_txop = 0; + tx_cmd->tx_flags = tx_flags; + tx_cmd->next_frame_len = 0; +} + +/* + * start REPLY_TX command process + */ +static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl3945_tx_cmd *tx_cmd; + struct iwl_tx_queue *txq = NULL; + struct iwl_queue *q = NULL; + struct iwl_device_cmd *out_cmd; + struct iwl_cmd_meta *out_meta; + dma_addr_t phys_addr; + dma_addr_t txcmd_phys; + int txq_id = skb_get_queue_mapping(skb); + u16 len, idx, hdr_len; + u8 id; + u8 unicast; + u8 sta_id; + u8 tid = 0; + __le16 fc; + u8 wait_write_ptr = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n"); + goto drop_unlock; + } + + if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) { + IWL_ERR(priv, "ERROR: No TX rate available.\n"); + goto drop_unlock; + } + + unicast = !is_multicast_ether_addr(hdr->addr1); + id = 0; + + fc = hdr->frame_control; + +#ifdef CONFIG_IWLWIFI_DEBUG + if (ieee80211_is_auth(fc)) + IWL_DEBUG_TX(priv, "Sending AUTH frame\n"); + else if (ieee80211_is_assoc_req(fc)) + IWL_DEBUG_TX(priv, "Sending ASSOC frame\n"); + else if (ieee80211_is_reassoc_req(fc)) + IWL_DEBUG_TX(priv, "Sending REASSOC frame\n"); +#endif + + spin_unlock_irqrestore(&priv->lock, flags); + + hdr_len = ieee80211_hdrlen(fc); + + /* Find index into station table for destination station */ + sta_id = iwl_sta_id_or_broadcast( + priv, &priv->contexts[IWL_RXON_CTX_BSS], + info->control.sta); + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n", + hdr->addr1); + goto drop; + } + + IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id); + + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; + if (unlikely(tid >= MAX_TID_COUNT)) + goto drop; + } + + /* Descriptor for chosen Tx queue */ + txq = &priv->txq[txq_id]; + q = &txq->q; + + if ((iwl_queue_space(q) < q->high_mark)) + goto drop; + + spin_lock_irqsave(&priv->lock, flags); + + idx = get_cmd_index(q, q->write_ptr, 0); + + /* Set up driver data for this TFD */ + memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info)); + txq->txb[q->write_ptr].skb = skb; + txq->txb[q->write_ptr].ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + /* Init first empty entry in queue's array of Tx/cmd buffers */ + out_cmd = txq->cmd[idx]; + out_meta = &txq->meta[idx]; + tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload; + memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); + memset(tx_cmd, 0, sizeof(*tx_cmd)); + + /* + * Set up the Tx-command (not MAC!) header. + * Store the chosen Tx queue and TFD index within the sequence field; + * after Tx, uCode's Tx response will return this value so driver can + * locate the frame within the tx queue and do post-tx processing. + */ + out_cmd->hdr.cmd = REPLY_TX; + out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | + INDEX_TO_SEQ(q->write_ptr))); + + /* Copy MAC header from skb into command buffer */ + memcpy(tx_cmd->hdr, hdr, hdr_len); + + + if (info->control.hw_key) + iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); + + /* TODO need this for burst mode later on */ + iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); + + /* set is_hcca to 0; it probably will never be implemented */ + iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx_cmd->len = cpu_to_le16(len); + + iwl_dbg_log_tx_data_frame(priv, len, hdr); + iwl_update_stats(priv, true, fc, len); + tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; + tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } + + IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); + iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd)); + iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, + ieee80211_hdrlen(fc)); + + /* + * Use the first empty entry in this queue's command buffer array + * to contain the Tx command and MAC header concatenated together + * (payload data will be in another buffer). + * Size of this varies, due to varying MAC header length. + * If end is not dword aligned, we'll have 2 extra bytes at the end + * of the MAC header (device reads on dword boundaries). + * We'll tell device about this padding later. + */ + len = sizeof(struct iwl3945_tx_cmd) + + sizeof(struct iwl_cmd_header) + hdr_len; + len = (len + 3) & ~3; + + /* Physical address of this Tx command's header (not MAC header!), + * within command buffer array. */ + txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr, + len, PCI_DMA_TODEVICE); + /* we do not map meta data ... so we can safely access address to + * provide to unmap command*/ + dma_unmap_addr_set(out_meta, mapping, txcmd_phys); + dma_unmap_len_set(out_meta, len, len); + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, + txcmd_phys, len, 1, 0); + + + /* Set up TFD's 2nd entry to point directly to remainder of skb, + * if any (802.11 null frames have no payload). */ + len = skb->len - hdr_len; + if (len) { + phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len, + len, PCI_DMA_TODEVICE); + priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, + phys_addr, len, + 0, U32_PAD(len)); + } + + + /* Tell device the write index *just past* this latest filled TFD */ + q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); + iwl_txq_update_write_ptr(priv, txq); + spin_unlock_irqrestore(&priv->lock, flags); + + if ((iwl_queue_space(q) < q->high_mark) + && priv->mac80211_registered) { + if (wait_write_ptr) { + spin_lock_irqsave(&priv->lock, flags); + txq->need_update = 1; + iwl_txq_update_write_ptr(priv, txq); + spin_unlock_irqrestore(&priv->lock, flags); + } + + iwl_stop_queue(priv, txq); + } + + return 0; + +drop_unlock: + spin_unlock_irqrestore(&priv->lock, flags); +drop: + return -1; +} + +static int iwl3945_get_measurement(struct iwl_priv *priv, + struct ieee80211_measurement_params *params, + u8 type) +{ + struct iwl_spectrum_cmd spectrum; + struct iwl_rx_packet *pkt; + struct iwl_host_cmd cmd = { + .id = REPLY_SPECTRUM_MEASUREMENT_CMD, + .data = (void *)&spectrum, + .flags = CMD_WANT_SKB, + }; + u32 add_time = le64_to_cpu(params->start_time); + int rc; + int spectrum_resp_status; + int duration = le16_to_cpu(params->duration); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) + add_time = iwl_usecs_to_beacons(priv, + le64_to_cpu(params->start_time) - priv->_3945.last_tsf, + le16_to_cpu(ctx->timing.beacon_interval)); + + memset(&spectrum, 0, sizeof(spectrum)); + + spectrum.channel_count = cpu_to_le16(1); + spectrum.flags = + RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; + spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; + cmd.len = sizeof(spectrum); + spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); + + if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) + spectrum.start_time = + iwl_add_beacon_time(priv, + priv->_3945.last_beacon_time, add_time, + le16_to_cpu(ctx->timing.beacon_interval)); + else + spectrum.start_time = 0; + + spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); + spectrum.channels[0].channel = params->channel; + spectrum.channels[0].type = type; + if (ctx->active.flags & RXON_FLG_BAND_24G_MSK) + spectrum.flags |= RXON_FLG_BAND_24G_MSK | + RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK; + + rc = iwl_send_cmd_sync(priv, &cmd); + if (rc) + return rc; + + pkt = (struct iwl_rx_packet *)cmd.reply_page; + if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n"); + rc = -EIO; + } + + spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status); + switch (spectrum_resp_status) { + case 0: /* Command will be handled */ + if (pkt->u.spectrum.id != 0xff) { + IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n", + pkt->u.spectrum.id); + priv->measurement_status &= ~MEASUREMENT_READY; + } + priv->measurement_status |= MEASUREMENT_ACTIVE; + rc = 0; + break; + + case 1: /* Command will not be handled */ + rc = -EAGAIN; + break; + } + + iwl_free_pages(priv, cmd.reply_page); + + return rc; +} + +static void iwl3945_rx_reply_alive(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_alive_resp *palive; + struct delayed_work *pwork; + + palive = &pkt->u.alive_frame; + + IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision " + "0x%01X 0x%01X\n", + palive->is_valid, palive->ver_type, + palive->ver_subtype); + + if (palive->ver_subtype == INITIALIZE_SUBTYPE) { + IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); + memcpy(&priv->card_alive_init, &pkt->u.alive_frame, + sizeof(struct iwl_alive_resp)); + pwork = &priv->init_alive_start; + } else { + IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); + memcpy(&priv->card_alive, &pkt->u.alive_frame, + sizeof(struct iwl_alive_resp)); + pwork = &priv->alive_start; + iwl3945_disable_events(priv); + } + + /* We delay the ALIVE response by 5ms to + * give the HW RF Kill time to activate... */ + if (palive->is_valid == UCODE_VALID_OK) + queue_delayed_work(priv->workqueue, pwork, + msecs_to_jiffies(5)); + else + IWL_WARN(priv, "uCode did not respond OK.\n"); +} + +static void iwl3945_rx_reply_add_sta(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = rxb_addr(rxb); +#endif + + IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status); +} + +static void iwl3945_bg_beacon_update(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, beacon_update); + struct sk_buff *beacon; + + /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ + beacon = ieee80211_beacon_get(priv->hw, + priv->contexts[IWL_RXON_CTX_BSS].vif); + + if (!beacon) { + IWL_ERR(priv, "update beacon failed\n"); + return; + } + + mutex_lock(&priv->mutex); + /* new beacon skb is allocated every time; dispose previous.*/ + if (priv->beacon_skb) + dev_kfree_skb(priv->beacon_skb); + + priv->beacon_skb = beacon; + mutex_unlock(&priv->mutex); + + iwl3945_send_beacon_cmd(priv); +} + +static void iwl3945_rx_beacon_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status); +#ifdef CONFIG_IWLWIFI_DEBUG + u8 rate = beacon->beacon_notify_hdr.rate; + + IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d " + "tsf %d %d rate %d\n", + le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK, + beacon->beacon_notify_hdr.failure_frame, + le32_to_cpu(beacon->ibss_mgr_status), + le32_to_cpu(beacon->high_tsf), + le32_to_cpu(beacon->low_tsf), rate); +#endif + + priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); + + if ((priv->iw_mode == NL80211_IFTYPE_AP) && + (!test_bit(STATUS_EXIT_PENDING, &priv->status))) + queue_work(priv->workqueue, &priv->beacon_update); +} + +/* Handle notification from uCode that card's power state is changing + * due to software, hardware, or critical temperature RFKILL */ +static void iwl3945_rx_card_state_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); + unsigned long status = priv->status; + + IWL_WARN(priv, "Card state received: HW:%s SW:%s\n", + (flags & HW_CARD_DISABLED) ? "Kill" : "On", + (flags & SW_CARD_DISABLED) ? "Kill" : "On"); + + iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + if (flags & HW_CARD_DISABLED) + set_bit(STATUS_RF_KILL_HW, &priv->status); + else + clear_bit(STATUS_RF_KILL_HW, &priv->status); + + + iwl_scan_cancel(priv); + + if ((test_bit(STATUS_RF_KILL_HW, &status) != + test_bit(STATUS_RF_KILL_HW, &priv->status))) + wiphy_rfkill_set_hw_state(priv->hw->wiphy, + test_bit(STATUS_RF_KILL_HW, &priv->status)); + else + wake_up_interruptible(&priv->wait_command_queue); +} + +/** + * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks + * + * Setup the RX handlers for each of the reply types sent from the uCode + * to the host. + * + * This function chains into the hardware specific files for them to setup + * any hardware specific handlers as well. + */ +static void iwl3945_setup_rx_handlers(struct iwl_priv *priv) +{ + priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive; + priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta; + priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error; + priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa; + priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = + iwl_rx_spectrum_measure_notif; + priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif; + priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = + iwl_rx_pm_debug_statistics_notif; + priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif; + + /* + * The same handler is used for both the REPLY to a discrete + * statistics request from the host as well as for the periodic + * statistics notifications (after received beacons) from the uCode. + */ + priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_reply_statistics; + priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics; + + iwl_setup_rx_scan_handlers(priv); + priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif; + + /* Set up hardware specific Rx handlers */ + iwl3945_hw_rx_handler_setup(priv); +} + +/************************** RX-FUNCTIONS ****************************/ +/* + * Rx theory of operation + * + * The host allocates 32 DMA target addresses and passes the host address + * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is + * 0 to 31 + * + * Rx Queue Indexes + * The host/firmware share two index registers for managing the Rx buffers. + * + * The READ index maps to the first position that the firmware may be writing + * to -- the driver can read up to (but not including) this position and get + * good data. + * The READ index is managed by the firmware once the card is enabled. + * + * The WRITE index maps to the last position the driver has read from -- the + * position preceding WRITE is the last slot the firmware can place a packet. + * + * The queue is empty (no good data) if WRITE = READ - 1, and is full if + * WRITE = READ. + * + * During initialization, the host sets up the READ queue position to the first + * INDEX position, and WRITE to the last (READ - 1 wrapped) + * + * When the firmware places a packet in a buffer, it will advance the READ index + * and fire the RX interrupt. The driver can then query the READ index and + * process as many packets as possible, moving the WRITE index forward as it + * resets the Rx queue buffers with new memory. + * + * The management in the driver is as follows: + * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When + * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled + * to replenish the iwl->rxq->rx_free. + * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the + * iwl->rxq is replenished and the READ INDEX is updated (updating the + * 'processed' and 'read' driver indexes as well) + * + A received packet is processed and handed to the kernel network stack, + * detached from the iwl->rxq. The driver 'processed' index is updated. + * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free + * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ + * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there + * were enough free buffers and RX_STALLED is set it is cleared. + * + * + * Driver sequence: + * + * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls + * iwl3945_rx_queue_restock + * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx + * queue, updates firmware pointers, and updates + * the WRITE index. If insufficient rx_free buffers + * are available, schedules iwl3945_rx_replenish + * + * -- enable interrupts -- + * ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the + * READ INDEX, detaching the SKB from the pool. + * Moves the packet buffer from queue to rx_used. + * Calls iwl3945_rx_queue_restock to refill any empty + * slots. + * ... + * + */ + +/** + * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr + */ +static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv, + dma_addr_t dma_addr) +{ + return cpu_to_le32((u32)dma_addr); +} + +/** + * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool + * + * If there are slots in the RX queue that need to be restocked, + * and we have free pre-allocated buffers, fill the ranks as much + * as we can, pulling from rx_free. + * + * This moves the 'write' index forward to catch up with 'processed', and + * also updates the memory address in the firmware to reference the new + * target buffer. + */ +static void iwl3945_rx_queue_restock(struct iwl_priv *priv) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct list_head *element; + struct iwl_rx_mem_buffer *rxb; + unsigned long flags; + int write; + + spin_lock_irqsave(&rxq->lock, flags); + write = rxq->write & ~0x7; + while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { + /* Get next free Rx buffer, remove from free list */ + element = rxq->rx_free.next; + rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + list_del(element); + + /* Point to Rx buffer via next RBD in circular buffer */ + rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma); + rxq->queue[rxq->write] = rxb; + rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; + rxq->free_count--; + } + spin_unlock_irqrestore(&rxq->lock, flags); + /* If the pre-allocated buffer pool is dropping low, schedule to + * refill it */ + if (rxq->free_count <= RX_LOW_WATERMARK) + queue_work(priv->workqueue, &priv->rx_replenish); + + + /* If we've added more space for the firmware to place data, tell it. + * Increment device's write pointer in multiples of 8. */ + if ((rxq->write_actual != (rxq->write & ~0x7)) + || (abs(rxq->write - rxq->read) > 7)) { + spin_lock_irqsave(&rxq->lock, flags); + rxq->need_update = 1; + spin_unlock_irqrestore(&rxq->lock, flags); + iwl_rx_queue_update_write_ptr(priv, rxq); + } +} + +/** + * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free + * + * When moving to rx_free an SKB is allocated for the slot. + * + * Also restock the Rx queue via iwl3945_rx_queue_restock. + * This is called as a scheduled work item (except for during initialization) + */ +static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct list_head *element; + struct iwl_rx_mem_buffer *rxb; + struct page *page; + unsigned long flags; + gfp_t gfp_mask = priority; + + while (1) { + spin_lock_irqsave(&rxq->lock, flags); + + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + return; + } + spin_unlock_irqrestore(&rxq->lock, flags); + + if (rxq->free_count > RX_LOW_WATERMARK) + gfp_mask |= __GFP_NOWARN; + + if (priv->hw_params.rx_page_order > 0) + gfp_mask |= __GFP_COMP; + + /* Alloc a new receive buffer */ + page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); + if (!page) { + if (net_ratelimit()) + IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n"); + if ((rxq->free_count <= RX_LOW_WATERMARK) && + net_ratelimit()) + IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n", + priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", + rxq->free_count); + /* We don't reschedule replenish work here -- we will + * call the restock method and if it still needs + * more buffers it will schedule replenish */ + break; + } + + spin_lock_irqsave(&rxq->lock, flags); + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + __free_pages(page, priv->hw_params.rx_page_order); + return; + } + element = rxq->rx_used.next; + rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + list_del(element); + spin_unlock_irqrestore(&rxq->lock, flags); + + rxb->page = page; + /* Get physical address of RB/SKB */ + rxb->page_dma = pci_map_page(priv->pci_dev, page, 0, + PAGE_SIZE << priv->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + + spin_lock_irqsave(&rxq->lock, flags); + + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + priv->alloc_rxb_page++; + + spin_unlock_irqrestore(&rxq->lock, flags); + } +} + +void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + unsigned long flags; + int i; + spin_lock_irqsave(&rxq->lock, flags); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { + /* In the reset function, these buffers may have been allocated + * to an SKB, so we need to unmap and free potential storage */ + if (rxq->pool[i].page != NULL) { + pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, + PAGE_SIZE << priv->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + __iwl_free_pages(priv, rxq->pool[i].page); + rxq->pool[i].page = NULL; + } + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + } + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->write_actual = 0; + rxq->free_count = 0; + spin_unlock_irqrestore(&rxq->lock, flags); +} + +void iwl3945_rx_replenish(void *data) +{ + struct iwl_priv *priv = data; + unsigned long flags; + + iwl3945_rx_allocate(priv, GFP_KERNEL); + + spin_lock_irqsave(&priv->lock, flags); + iwl3945_rx_queue_restock(priv); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void iwl3945_rx_replenish_now(struct iwl_priv *priv) +{ + iwl3945_rx_allocate(priv, GFP_ATOMIC); + + iwl3945_rx_queue_restock(priv); +} + + +/* Assumes that the skb field of the buffers in 'pool' is kept accurate. + * If an SKB has been detached, the POOL needs to have its SKB set to NULL + * This free routine walks the list of POOL entries and if SKB is set to + * non NULL it is unmapped and freed + */ +static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + int i; + for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { + if (rxq->pool[i].page != NULL) { + pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, + PAGE_SIZE << priv->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + __iwl_free_pages(priv, rxq->pool[i].page); + rxq->pool[i].page = NULL; + } + } + + dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, + rxq->bd_dma); + dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status), + rxq->rb_stts, rxq->rb_stts_dma); + rxq->bd = NULL; + rxq->rb_stts = NULL; +} + + +/* Convert linear signal-to-noise ratio into dB */ +static u8 ratio2dB[100] = { +/* 0 1 2 3 4 5 6 7 8 9 */ + 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */ + 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */ + 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */ + 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */ + 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */ + 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */ + 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */ + 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */ + 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */ + 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */ +}; + +/* Calculates a relative dB value from a ratio of linear + * (i.e. not dB) signal levels. + * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ +int iwl3945_calc_db_from_ratio(int sig_ratio) +{ + /* 1000:1 or higher just report as 60 dB */ + if (sig_ratio >= 1000) + return 60; + + /* 100:1 or higher, divide by 10 and use table, + * add 20 dB to make up for divide by 10 */ + if (sig_ratio >= 100) + return 20 + (int)ratio2dB[sig_ratio/10]; + + /* We shouldn't see this */ + if (sig_ratio < 1) + return 0; + + /* Use table for ratios 1:1 - 99:1 */ + return (int)ratio2dB[sig_ratio]; +} + +/** + * iwl3945_rx_handle - Main entry function for receiving responses from uCode + * + * Uses the priv->rx_handlers callback function array to invoke + * the appropriate handlers, including command responses, + * frame-received notifications, and other notifications. + */ +static void iwl3945_rx_handle(struct iwl_priv *priv) +{ + struct iwl_rx_mem_buffer *rxb; + struct iwl_rx_packet *pkt; + struct iwl_rx_queue *rxq = &priv->rxq; + u32 r, i; + int reclaim; + unsigned long flags; + u8 fill_rx = 0; + u32 count = 8; + int total_empty = 0; + + /* uCode's read index (stored in shared DRAM) indicates the last Rx + * buffer that the driver may process (last buffer filled by ucode). */ + r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; + i = rxq->read; + + /* calculate total frames need to be restock after handling RX */ + total_empty = r - rxq->write_actual; + if (total_empty < 0) + total_empty += RX_QUEUE_SIZE; + + if (total_empty > (RX_QUEUE_SIZE / 2)) + fill_rx = 1; + /* Rx interrupt, but nothing sent from uCode */ + if (i == r) + IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i); + + while (i != r) { + int len; + + rxb = rxq->queue[i]; + + /* If an RXB doesn't have a Rx queue slot associated with it, + * then a bug has been introduced in the queue refilling + * routines -- catch it here */ + BUG_ON(rxb == NULL); + + rxq->queue[i] = NULL; + + pci_unmap_page(priv->pci_dev, rxb->page_dma, + PAGE_SIZE << priv->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + pkt = rxb_addr(rxb); + + len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + len += sizeof(u32); /* account for status word */ + trace_iwlwifi_dev_rx(priv, pkt, len); + + /* Reclaim a command buffer only if this packet is a response + * to a (driver-originated) command. + * If the packet (e.g. Rx frame) originated from uCode, + * there is no command buffer to reclaim. + * Ucode should set SEQ_RX_FRAME bit if ucode-originated, + * but apparently a few don't get set; catch them here. */ + reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && + (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && + (pkt->hdr.cmd != REPLY_TX); + + /* Based on type of command response or notification, + * handle those that need handling via function in + * rx_handlers table. See iwl3945_setup_rx_handlers() */ + if (priv->rx_handlers[pkt->hdr.cmd]) { + IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i, + get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); + priv->isr_stats.rx_handlers[pkt->hdr.cmd]++; + priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); + } else { + /* No handling needed */ + IWL_DEBUG_RX(priv, + "r %d i %d No handler needed for %s, 0x%02x\n", + r, i, get_cmd_string(pkt->hdr.cmd), + pkt->hdr.cmd); + } + + /* + * XXX: After here, we should always check rxb->page + * against NULL before touching it or its virtual + * memory (pkt). Because some rx_handler might have + * already taken or freed the pages. + */ + + if (reclaim) { + /* Invoke any callbacks, transfer the buffer to caller, + * and fire off the (possibly) blocking iwl_send_cmd() + * as we reclaim the driver command queue */ + if (rxb->page) + iwl_tx_cmd_complete(priv, rxb); + else + IWL_WARN(priv, "Claim null rxb?\n"); + } + + /* Reuse the page if possible. For notification packets and + * SKBs that fail to Rx correctly, add them back into the + * rx_free list for reuse later. */ + spin_lock_irqsave(&rxq->lock, flags); + if (rxb->page != NULL) { + rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page, + 0, PAGE_SIZE << priv->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } else + list_add_tail(&rxb->list, &rxq->rx_used); + + spin_unlock_irqrestore(&rxq->lock, flags); + + i = (i + 1) & RX_QUEUE_MASK; + /* If there are a lot of unused frames, + * restock the Rx queue so ucode won't assert. */ + if (fill_rx) { + count++; + if (count >= 8) { + rxq->read = i; + iwl3945_rx_replenish_now(priv); + count = 0; + } + } + } + + /* Backtrack one entry */ + rxq->read = i; + if (fill_rx) + iwl3945_rx_replenish_now(priv); + else + iwl3945_rx_queue_restock(priv); +} + +/* call this function to flush any scheduled tasklet */ +static inline void iwl_synchronize_irq(struct iwl_priv *priv) +{ + /* wait to make sure we flush pending tasklet*/ + synchronize_irq(priv->pci_dev->irq); + tasklet_kill(&priv->irq_tasklet); +} + +static const char *desc_lookup(int i) +{ + switch (i) { + case 1: + return "FAIL"; + case 2: + return "BAD_PARAM"; + case 3: + return "BAD_CHECKSUM"; + case 4: + return "NMI_INTERRUPT"; + case 5: + return "SYSASSERT"; + case 6: + return "FATAL_ERROR"; + } + + return "UNKNOWN"; +} + +#define ERROR_START_OFFSET (1 * sizeof(u32)) +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) + +void iwl3945_dump_nic_error_log(struct iwl_priv *priv) +{ + u32 i; + u32 desc, time, count, base, data1; + u32 blink1, blink2, ilink1, ilink2; + + base = le32_to_cpu(priv->card_alive.error_event_table_ptr); + + if (!iwl3945_hw_valid_rtc_data_addr(base)) { + IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base); + return; + } + + + count = iwl_read_targ_mem(priv, base); + + if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { + IWL_ERR(priv, "Start IWL Error Log Dump:\n"); + IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", + priv->status, count); + } + + IWL_ERR(priv, "Desc Time asrtPC blink2 " + "ilink1 nmiPC Line\n"); + for (i = ERROR_START_OFFSET; + i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET; + i += ERROR_ELEM_SIZE) { + desc = iwl_read_targ_mem(priv, base + i); + time = + iwl_read_targ_mem(priv, base + i + 1 * sizeof(u32)); + blink1 = + iwl_read_targ_mem(priv, base + i + 2 * sizeof(u32)); + blink2 = + iwl_read_targ_mem(priv, base + i + 3 * sizeof(u32)); + ilink1 = + iwl_read_targ_mem(priv, base + i + 4 * sizeof(u32)); + ilink2 = + iwl_read_targ_mem(priv, base + i + 5 * sizeof(u32)); + data1 = + iwl_read_targ_mem(priv, base + i + 6 * sizeof(u32)); + + IWL_ERR(priv, + "%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n", + desc_lookup(desc), desc, time, blink1, blink2, + ilink1, ilink2, data1); + trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, 0, + 0, blink1, blink2, ilink1, ilink2); + } +} + +#define EVENT_START_OFFSET (6 * sizeof(u32)) + +/** + * iwl3945_print_event_log - Dump error event log to syslog + * + */ +static int iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx, + u32 num_events, u32 mode, + int pos, char **buf, size_t bufsz) +{ + u32 i; + u32 base; /* SRAM byte address of event log header */ + u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ + u32 ptr; /* SRAM byte address of log data */ + u32 ev, time, data; /* event log data */ + unsigned long reg_flags; + + if (num_events == 0) + return pos; + + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (mode == 0) + event_size = 2 * sizeof(u32); + else + event_size = 3 * sizeof(u32); + + ptr = base + EVENT_START_OFFSET + (start_idx * event_size); + + /* Make sure device is powered up for SRAM reads */ + spin_lock_irqsave(&priv->reg_lock, reg_flags); + iwl_grab_nic_access(priv); + + /* Set starting address; reads will auto-increment */ + _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); + rmb(); + + /* "time" is actually "data" for mode 0 (no timestamp). + * place event id # at far right for easier visual parsing. */ + for (i = 0; i < num_events; i++) { + ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (mode == 0) { + /* data, ev */ + if (bufsz) { + pos += scnprintf(*buf + pos, bufsz - pos, + "0x%08x:%04u\n", + time, ev); + } else { + IWL_ERR(priv, "0x%08x\t%04u\n", time, ev); + trace_iwlwifi_dev_ucode_event(priv, 0, + time, ev); + } + } else { + data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (bufsz) { + pos += scnprintf(*buf + pos, bufsz - pos, + "%010u:0x%08x:%04u\n", + time, data, ev); + } else { + IWL_ERR(priv, "%010u\t0x%08x\t%04u\n", + time, data, ev); + trace_iwlwifi_dev_ucode_event(priv, time, + data, ev); + } + } + } + + /* Allow device to power down */ + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->reg_lock, reg_flags); + return pos; +} + +/** + * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog + */ +static int iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity, + u32 num_wraps, u32 next_entry, + u32 size, u32 mode, + int pos, char **buf, size_t bufsz) +{ + /* + * display the newest DEFAULT_LOG_ENTRIES entries + * i.e the entries just before the next ont that uCode would fill. + */ + if (num_wraps) { + if (next_entry < size) { + pos = iwl3945_print_event_log(priv, + capacity - (size - next_entry), + size - next_entry, mode, + pos, buf, bufsz); + pos = iwl3945_print_event_log(priv, 0, + next_entry, mode, + pos, buf, bufsz); + } else + pos = iwl3945_print_event_log(priv, next_entry - size, + size, mode, + pos, buf, bufsz); + } else { + if (next_entry < size) + pos = iwl3945_print_event_log(priv, 0, + next_entry, mode, + pos, buf, bufsz); + else + pos = iwl3945_print_event_log(priv, next_entry - size, + size, mode, + pos, buf, bufsz); + } + return pos; +} + +#define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20) + +int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log, + char **buf, bool display) +{ + u32 base; /* SRAM byte address of event log header */ + u32 capacity; /* event log capacity in # entries */ + u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ + u32 num_wraps; /* # times uCode wrapped to top of log */ + u32 next_entry; /* index of next entry to be written by uCode */ + u32 size; /* # entries that we'll print */ + int pos = 0; + size_t bufsz = 0; + + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + if (!iwl3945_hw_valid_rtc_data_addr(base)) { + IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); + return -EINVAL; + } + + /* event log header */ + capacity = iwl_read_targ_mem(priv, base); + mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); + num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); + next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); + + if (capacity > priv->cfg->base_params->max_event_log_size) { + IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n", + capacity, priv->cfg->base_params->max_event_log_size); + capacity = priv->cfg->base_params->max_event_log_size; + } + + if (next_entry > priv->cfg->base_params->max_event_log_size) { + IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n", + next_entry, priv->cfg->base_params->max_event_log_size); + next_entry = priv->cfg->base_params->max_event_log_size; + } + + size = num_wraps ? capacity : next_entry; + + /* bail out if nothing in log */ + if (size == 0) { + IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); + return pos; + } + +#ifdef CONFIG_IWLWIFI_DEBUG + if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) + size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) + ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; +#else + size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) + ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; +#endif + + IWL_ERR(priv, "Start IWL Event Log Dump: display last %d count\n", + size); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (display) { + if (full_log) + bufsz = capacity * 48; + else + bufsz = size * 48; + *buf = kmalloc(bufsz, GFP_KERNEL); + if (!*buf) + return -ENOMEM; + } + if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) { + /* if uCode has wrapped back to top of log, + * start at the oldest entry, + * i.e the next one that uCode would fill. + */ + if (num_wraps) + pos = iwl3945_print_event_log(priv, next_entry, + capacity - next_entry, mode, + pos, buf, bufsz); + + /* (then/else) start at top of log */ + pos = iwl3945_print_event_log(priv, 0, next_entry, mode, + pos, buf, bufsz); + } else + pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps, + next_entry, size, mode, + pos, buf, bufsz); +#else + pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps, + next_entry, size, mode, + pos, buf, bufsz); +#endif + return pos; +} + +static void iwl3945_irq_tasklet(struct iwl_priv *priv) +{ + u32 inta, handled = 0; + u32 inta_fh; + unsigned long flags; +#ifdef CONFIG_IWLWIFI_DEBUG + u32 inta_mask; +#endif + + spin_lock_irqsave(&priv->lock, flags); + + /* Ack/clear/reset pending uCode interrupts. + * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, + * and will clear only when CSR_FH_INT_STATUS gets cleared. */ + inta = iwl_read32(priv, CSR_INT); + iwl_write32(priv, CSR_INT, inta); + + /* Ack/clear/reset pending flow-handler (DMA) interrupts. + * Any new interrupts that happen after this, either while we're + * in this tasklet, or later, will show up in next ISR/tasklet. */ + inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); + iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (iwl_get_debug_level(priv) & IWL_DL_ISR) { + /* just for debug */ + inta_mask = iwl_read32(priv, CSR_INT_MASK); + IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", + inta, inta_mask, inta_fh); + } +#endif + + spin_unlock_irqrestore(&priv->lock, flags); + + /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not + * atomic, make sure that inta covers all the interrupts that + * we've discovered, even if FH interrupt came in just after + * reading CSR_INT. */ + if (inta_fh & CSR39_FH_INT_RX_MASK) + inta |= CSR_INT_BIT_FH_RX; + if (inta_fh & CSR39_FH_INT_TX_MASK) + inta |= CSR_INT_BIT_FH_TX; + + /* Now service all interrupt bits discovered above. */ + if (inta & CSR_INT_BIT_HW_ERR) { + IWL_ERR(priv, "Hardware error detected. Restarting.\n"); + + /* Tell the device to stop sending interrupts */ + iwl_disable_interrupts(priv); + + priv->isr_stats.hw++; + iwl_irq_handle_error(priv); + + handled |= CSR_INT_BIT_HW_ERR; + + return; + } + +#ifdef CONFIG_IWLWIFI_DEBUG + if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { + /* NIC fires this, but we don't use it, redundant with WAKEUP */ + if (inta & CSR_INT_BIT_SCD) { + IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " + "the frame/frames.\n"); + priv->isr_stats.sch++; + } + + /* Alive notification via Rx interrupt will do the real work */ + if (inta & CSR_INT_BIT_ALIVE) { + IWL_DEBUG_ISR(priv, "Alive interrupt\n"); + priv->isr_stats.alive++; + } + } +#endif + /* Safely ignore these bits for debug checks below */ + inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); + + /* Error detected by uCode */ + if (inta & CSR_INT_BIT_SW_ERR) { + IWL_ERR(priv, "Microcode SW error detected. " + "Restarting 0x%X.\n", inta); + priv->isr_stats.sw++; + iwl_irq_handle_error(priv); + handled |= CSR_INT_BIT_SW_ERR; + } + + /* uCode wakes up after power-down sleep */ + if (inta & CSR_INT_BIT_WAKEUP) { + IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); + iwl_rx_queue_update_write_ptr(priv, &priv->rxq); + iwl_txq_update_write_ptr(priv, &priv->txq[0]); + iwl_txq_update_write_ptr(priv, &priv->txq[1]); + iwl_txq_update_write_ptr(priv, &priv->txq[2]); + iwl_txq_update_write_ptr(priv, &priv->txq[3]); + iwl_txq_update_write_ptr(priv, &priv->txq[4]); + iwl_txq_update_write_ptr(priv, &priv->txq[5]); + + priv->isr_stats.wakeup++; + handled |= CSR_INT_BIT_WAKEUP; + } + + /* All uCode command responses, including Tx command responses, + * Rx "responses" (frame-received notification), and other + * notifications from uCode come through here*/ + if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { + iwl3945_rx_handle(priv); + priv->isr_stats.rx++; + handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); + } + + if (inta & CSR_INT_BIT_FH_TX) { + IWL_DEBUG_ISR(priv, "Tx interrupt\n"); + priv->isr_stats.tx++; + + iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6)); + iwl_write_direct32(priv, FH39_TCSR_CREDIT + (FH39_SRVC_CHNL), 0x0); + handled |= CSR_INT_BIT_FH_TX; + } + + if (inta & ~handled) { + IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); + priv->isr_stats.unhandled++; + } + + if (inta & ~priv->inta_mask) { + IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", + inta & ~priv->inta_mask); + IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh); + } + + /* Re-enable all interrupts */ + /* only Re-enable if disabled by irq */ + if (test_bit(STATUS_INT_ENABLED, &priv->status)) + iwl_enable_interrupts(priv); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { + inta = iwl_read32(priv, CSR_INT); + inta_mask = iwl_read32(priv, CSR_INT_MASK); + inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); + IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " + "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); + } +#endif +} + +static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum ieee80211_band band, + struct iwl3945_scan_channel *scan_ch) +{ + const struct ieee80211_supported_band *sband; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added = 0; + u8 channel = 0; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) { + IWL_ERR(priv, "invalid band\n"); + return added; + } + + active_dwell = iwl_get_active_dwell_time(priv, band, 0); + passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); + + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + + + channel = iwl_get_single_channel_number(priv, band); + + if (channel) { + scan_ch->channel = channel; + scan_ch->type = 0; /* passive */ + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + /* Set txpower levels to defaults */ + scan_ch->tpc.dsp_atten = 110; + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); + added++; + } else + IWL_ERR(priv, "no valid channel found\n"); + return added; +} + +static int iwl3945_get_channels_for_scan(struct iwl_priv *priv, + enum ieee80211_band band, + u8 is_active, u8 n_probes, + struct iwl3945_scan_channel *scan_ch, + struct ieee80211_vif *vif) +{ + struct ieee80211_channel *chan; + const struct ieee80211_supported_band *sband; + const struct iwl_channel_info *ch_info; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added, i; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) + return 0; + + active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); + passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); + + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + + for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { + chan = priv->scan_request->channels[i]; + + if (chan->band != band) + continue; + + scan_ch->channel = chan->hw_value; + + ch_info = iwl_get_channel_info(priv, band, scan_ch->channel); + if (!is_channel_valid(ch_info)) { + IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n", + scan_ch->channel); + continue; + } + + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + /* If passive , set up for auto-switch + * and use long active_dwell time. + */ + if (!is_active || is_channel_passive(ch_info) || + (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) { + scan_ch->type = 0; /* passive */ + if (IWL_UCODE_API(priv->ucode_ver) == 1) + scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1); + } else { + scan_ch->type = 1; /* active */ + } + + /* Set direct probe bits. These may be used both for active + * scan channels (probes gets sent right away), + * or for passive channels (probes get se sent only after + * hearing clear Rx packet).*/ + if (IWL_UCODE_API(priv->ucode_ver) >= 2) { + if (n_probes) + scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes); + } else { + /* uCode v1 does not allow setting direct probe bits on + * passive channel. */ + if ((scan_ch->type & 1) && n_probes) + scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes); + } + + /* Set txpower levels to defaults */ + scan_ch->tpc.dsp_atten = 110; + /* scan_pwr_info->tpc.dsp_atten; */ + + /*scan_pwr_info->tpc.tx_gain; */ + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; + else { + scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); + /* NOTE: if we were doing 6Mb OFDM for scans we'd use + * power level: + * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; + */ + } + + IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n", + scan_ch->channel, + (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", + (scan_ch->type & 1) ? + active_dwell : passive_dwell); + + scan_ch++; + added++; + } + + IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); + return added; +} + +static void iwl3945_init_hw_rates(struct iwl_priv *priv, + struct ieee80211_rate *rates) +{ + int i; + + for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { + rates[i].bitrate = iwl3945_rates[i].ieee * 5; + rates[i].hw_value = i; /* Rate scaling will work on indexes */ + rates[i].hw_value_short = i; + rates[i].flags = 0; + if ((i > IWL39_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) { + /* + * If CCK != 1M then set short preamble rate flag. + */ + rates[i].flags |= (iwl3945_rates[i].plcp == 10) ? + 0 : IEEE80211_RATE_SHORT_PREAMBLE; + } + } +} + +/****************************************************************************** + * + * uCode download functions + * + ******************************************************************************/ + +static void iwl3945_dealloc_ucode_pci(struct iwl_priv *priv) +{ + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); +} + +/** + * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host, + * looking at all data. + */ +static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 len) +{ + u32 val; + u32 save_len = len; + int rc = 0; + u32 errcnt; + + IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); + + iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, + IWL39_RTC_INST_LOWER_BOUND); + + errcnt = 0; + for (; len > 0; len -= sizeof(u32), image++) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + IWL_ERR(priv, "uCode INST section is invalid at " + "offset 0x%x, is 0x%x, s/b 0x%x\n", + save_len - len, val, le32_to_cpu(*image)); + rc = -EIO; + errcnt++; + if (errcnt >= 20) + break; + } + } + + + if (!errcnt) + IWL_DEBUG_INFO(priv, + "ucode image in INSTRUCTION memory is good\n"); + + return rc; +} + + +/** + * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host, + * using sample data 100 bytes apart. If these sample points are good, + * it's a pretty good bet that everything between them is good, too. + */ +static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) +{ + u32 val; + int rc = 0; + u32 errcnt = 0; + u32 i; + + IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); + + for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, + i + IWL39_RTC_INST_LOWER_BOUND); + val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { +#if 0 /* Enable this if you want to see details */ + IWL_ERR(priv, "uCode INST section is invalid at " + "offset 0x%x, is 0x%x, s/b 0x%x\n", + i, val, *image); +#endif + rc = -EIO; + errcnt++; + if (errcnt >= 3) + break; + } + } + + return rc; +} + + +/** + * iwl3945_verify_ucode - determine which instruction image is in SRAM, + * and verify its contents + */ +static int iwl3945_verify_ucode(struct iwl_priv *priv) +{ + __le32 *image; + u32 len; + int rc = 0; + + /* Try bootstrap */ + image = (__le32 *)priv->ucode_boot.v_addr; + len = priv->ucode_boot.len; + rc = iwl3945_verify_inst_sparse(priv, image, len); + if (rc == 0) { + IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n"); + return 0; + } + + /* Try initialize */ + image = (__le32 *)priv->ucode_init.v_addr; + len = priv->ucode_init.len; + rc = iwl3945_verify_inst_sparse(priv, image, len); + if (rc == 0) { + IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n"); + return 0; + } + + /* Try runtime/protocol */ + image = (__le32 *)priv->ucode_code.v_addr; + len = priv->ucode_code.len; + rc = iwl3945_verify_inst_sparse(priv, image, len); + if (rc == 0) { + IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n"); + return 0; + } + + IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); + + /* Since nothing seems to match, show first several data entries in + * instruction SRAM, so maybe visual inspection will give a clue. + * Selection of bootstrap image (vs. other images) is arbitrary. */ + image = (__le32 *)priv->ucode_boot.v_addr; + len = priv->ucode_boot.len; + rc = iwl3945_verify_inst_full(priv, image, len); + + return rc; +} + +static void iwl3945_nic_start(struct iwl_priv *priv) +{ + /* Remove all resets to allow NIC to operate */ + iwl_write32(priv, CSR_RESET, 0); +} + +#define IWL3945_UCODE_GET(item) \ +static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode)\ +{ \ + return le32_to_cpu(ucode->u.v1.item); \ +} + +static u32 iwl3945_ucode_get_header_size(u32 api_ver) +{ + return 24; +} + +static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode) +{ + return (u8 *) ucode->u.v1.data; +} + +IWL3945_UCODE_GET(inst_size); +IWL3945_UCODE_GET(data_size); +IWL3945_UCODE_GET(init_size); +IWL3945_UCODE_GET(init_data_size); +IWL3945_UCODE_GET(boot_size); + +/** + * iwl3945_read_ucode - Read uCode images from disk file. + * + * Copy into buffers for card to fetch via bus-mastering + */ +static int iwl3945_read_ucode(struct iwl_priv *priv) +{ + const struct iwl_ucode_header *ucode; + int ret = -EINVAL, index; + const struct firmware *ucode_raw; + /* firmware file name contains uCode/driver compatibility version */ + const char *name_pre = priv->cfg->fw_name_pre; + const unsigned int api_max = priv->cfg->ucode_api_max; + const unsigned int api_min = priv->cfg->ucode_api_min; + char buf[25]; + u8 *src; + size_t len; + u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size; + + /* Ask kernel firmware_class module to get the boot firmware off disk. + * request_firmware() is synchronous, file is in memory on return. */ + for (index = api_max; index >= api_min; index--) { + sprintf(buf, "%s%u%s", name_pre, index, ".ucode"); + ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev); + if (ret < 0) { + IWL_ERR(priv, "%s firmware file req failed: %d\n", + buf, ret); + if (ret == -ENOENT) + continue; + else + goto error; + } else { + if (index < api_max) + IWL_ERR(priv, "Loaded firmware %s, " + "which is deprecated. " + " Please use API v%u instead.\n", + buf, api_max); + IWL_DEBUG_INFO(priv, "Got firmware '%s' file " + "(%zd bytes) from disk\n", + buf, ucode_raw->size); + break; + } + } + + if (ret < 0) + goto error; + + /* Make sure that we got at least our header! */ + if (ucode_raw->size < iwl3945_ucode_get_header_size(1)) { + IWL_ERR(priv, "File size way too small!\n"); + ret = -EINVAL; + goto err_release; + } + + /* Data from ucode file: header followed by uCode images */ + ucode = (struct iwl_ucode_header *)ucode_raw->data; + + priv->ucode_ver = le32_to_cpu(ucode->ver); + api_ver = IWL_UCODE_API(priv->ucode_ver); + inst_size = iwl3945_ucode_get_inst_size(ucode); + data_size = iwl3945_ucode_get_data_size(ucode); + init_size = iwl3945_ucode_get_init_size(ucode); + init_data_size = iwl3945_ucode_get_init_data_size(ucode); + boot_size = iwl3945_ucode_get_boot_size(ucode); + src = iwl3945_ucode_get_data(ucode); + + /* api_ver should match the api version forming part of the + * firmware filename ... but we don't check for that and only rely + * on the API version read from firmware header from here on forward */ + + if (api_ver < api_min || api_ver > api_max) { + IWL_ERR(priv, "Driver unable to support your firmware API. " + "Driver supports v%u, firmware is v%u.\n", + api_max, api_ver); + priv->ucode_ver = 0; + ret = -EINVAL; + goto err_release; + } + if (api_ver != api_max) + IWL_ERR(priv, "Firmware has old API version. Expected %u, " + "got %u. New firmware can be obtained " + "from http://www.intellinuxwireless.org.\n", + api_max, api_ver); + + IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n", + IWL_UCODE_MAJOR(priv->ucode_ver), + IWL_UCODE_MINOR(priv->ucode_ver), + IWL_UCODE_API(priv->ucode_ver), + IWL_UCODE_SERIAL(priv->ucode_ver)); + + snprintf(priv->hw->wiphy->fw_version, + sizeof(priv->hw->wiphy->fw_version), + "%u.%u.%u.%u", + IWL_UCODE_MAJOR(priv->ucode_ver), + IWL_UCODE_MINOR(priv->ucode_ver), + IWL_UCODE_API(priv->ucode_ver), + IWL_UCODE_SERIAL(priv->ucode_ver)); + + IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n", + priv->ucode_ver); + IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n", + inst_size); + IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n", + data_size); + IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n", + init_size); + IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n", + init_data_size); + IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n", + boot_size); + + + /* Verify size of file vs. image size info in file's header */ + if (ucode_raw->size != iwl3945_ucode_get_header_size(api_ver) + + inst_size + data_size + init_size + + init_data_size + boot_size) { + + IWL_DEBUG_INFO(priv, + "uCode file size %zd does not match expected size\n", + ucode_raw->size); + ret = -EINVAL; + goto err_release; + } + + /* Verify that uCode images will fit in card's SRAM */ + if (inst_size > IWL39_MAX_INST_SIZE) { + IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n", + inst_size); + ret = -EINVAL; + goto err_release; + } + + if (data_size > IWL39_MAX_DATA_SIZE) { + IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n", + data_size); + ret = -EINVAL; + goto err_release; + } + if (init_size > IWL39_MAX_INST_SIZE) { + IWL_DEBUG_INFO(priv, + "uCode init instr len %d too large to fit in\n", + init_size); + ret = -EINVAL; + goto err_release; + } + if (init_data_size > IWL39_MAX_DATA_SIZE) { + IWL_DEBUG_INFO(priv, + "uCode init data len %d too large to fit in\n", + init_data_size); + ret = -EINVAL; + goto err_release; + } + if (boot_size > IWL39_MAX_BSM_SIZE) { + IWL_DEBUG_INFO(priv, + "uCode boot instr len %d too large to fit in\n", + boot_size); + ret = -EINVAL; + goto err_release; + } + + /* Allocate ucode buffers for card's bus-master loading ... */ + + /* Runtime instructions and 2 copies of data: + * 1) unmodified from disk + * 2) backup cache for save/restore during power-downs */ + priv->ucode_code.len = inst_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); + + priv->ucode_data.len = data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); + + priv->ucode_data_backup.len = data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + + if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || + !priv->ucode_data_backup.v_addr) + goto err_pci_alloc; + + /* Initialization instructions and data */ + if (init_size && init_data_size) { + priv->ucode_init.len = init_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); + + priv->ucode_init_data.len = init_data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); + + if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) + goto err_pci_alloc; + } + + /* Bootstrap (instructions only, no data) */ + if (boot_size) { + priv->ucode_boot.len = boot_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); + + if (!priv->ucode_boot.v_addr) + goto err_pci_alloc; + } + + /* Copy images into buffers for card's bus-master reads ... */ + + /* Runtime instructions (first block of data in file) */ + len = inst_size; + IWL_DEBUG_INFO(priv, + "Copying (but not loading) uCode instr len %zd\n", len); + memcpy(priv->ucode_code.v_addr, src, len); + src += len; + + IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", + priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); + + /* Runtime data (2nd block) + * NOTE: Copy into backup buffer will be done in iwl3945_up() */ + len = data_size; + IWL_DEBUG_INFO(priv, + "Copying (but not loading) uCode data len %zd\n", len); + memcpy(priv->ucode_data.v_addr, src, len); + memcpy(priv->ucode_data_backup.v_addr, src, len); + src += len; + + /* Initialization instructions (3rd block) */ + if (init_size) { + len = init_size; + IWL_DEBUG_INFO(priv, + "Copying (but not loading) init instr len %zd\n", len); + memcpy(priv->ucode_init.v_addr, src, len); + src += len; + } + + /* Initialization data (4th block) */ + if (init_data_size) { + len = init_data_size; + IWL_DEBUG_INFO(priv, + "Copying (but not loading) init data len %zd\n", len); + memcpy(priv->ucode_init_data.v_addr, src, len); + src += len; + } + + /* Bootstrap instructions (5th block) */ + len = boot_size; + IWL_DEBUG_INFO(priv, + "Copying (but not loading) boot instr len %zd\n", len); + memcpy(priv->ucode_boot.v_addr, src, len); + + /* We have our copies now, allow OS release its copies */ + release_firmware(ucode_raw); + return 0; + + err_pci_alloc: + IWL_ERR(priv, "failed to allocate pci memory\n"); + ret = -ENOMEM; + iwl3945_dealloc_ucode_pci(priv); + + err_release: + release_firmware(ucode_raw); + + error: + return ret; +} + + +/** + * iwl3945_set_ucode_ptrs - Set uCode address location + * + * Tell initialization uCode where to find runtime uCode. + * + * BSM registers initially contain pointers to initialization uCode. + * We need to replace them to load runtime uCode inst and data, + * and to save runtime data when powering down. + */ +static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv) +{ + dma_addr_t pinst; + dma_addr_t pdata; + + /* bits 31:0 for 3945 */ + pinst = priv->ucode_code.p_addr; + pdata = priv->ucode_data_backup.p_addr; + + /* Tell bootstrap uCode where to find image to load */ + iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); + iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); + iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, + priv->ucode_data.len); + + /* Inst byte count must be last to set up, bit 31 signals uCode + * that all new ptr/size info is in place */ + iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, + priv->ucode_code.len | BSM_DRAM_INST_LOAD); + + IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n"); + + return 0; +} + +/** + * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received + * + * Called after REPLY_ALIVE notification received from "initialize" uCode. + * + * Tell "initialize" uCode to go ahead and load the runtime uCode. + */ +static void iwl3945_init_alive_start(struct iwl_priv *priv) +{ + /* Check alive response for "valid" sign from uCode */ + if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n"); + goto restart; + } + + /* Bootstrap uCode has loaded initialize uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "initialize" alive if code weren't properly loaded. */ + if (iwl3945_verify_ucode(priv)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n"); + goto restart; + } + + /* Send pointers to protocol/runtime uCode image ... init code will + * load and launch runtime uCode, which will send us another "Alive" + * notification. */ + IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); + if (iwl3945_set_ucode_ptrs(priv)) { + /* Runtime instruction load won't happen; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n"); + goto restart; + } + return; + + restart: + queue_work(priv->workqueue, &priv->restart); +} + +/** + * iwl3945_alive_start - called after REPLY_ALIVE notification received + * from protocol/runtime uCode (initialization uCode's + * Alive gets handled by iwl3945_init_alive_start()). + */ +static void iwl3945_alive_start(struct iwl_priv *priv) +{ + int thermal_spin = 0; + u32 rfkill; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); + + if (priv->card_alive.is_valid != UCODE_VALID_OK) { + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + IWL_DEBUG_INFO(priv, "Alive failed.\n"); + goto restart; + } + + /* Initialize uCode has loaded Runtime uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "runtime" alive if code weren't properly loaded. */ + if (iwl3945_verify_ucode(priv)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n"); + goto restart; + } + + rfkill = iwl_read_prph(priv, APMG_RFKILL_REG); + IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill); + + if (rfkill & 0x1) { + clear_bit(STATUS_RF_KILL_HW, &priv->status); + /* if RFKILL is not on, then wait for thermal + * sensor in adapter to kick in */ + while (iwl3945_hw_get_temperature(priv) == 0) { + thermal_spin++; + udelay(10); + } + + if (thermal_spin) + IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n", + thermal_spin * 10); + } else + set_bit(STATUS_RF_KILL_HW, &priv->status); + + /* After the ALIVE response, we can send commands to 3945 uCode */ + set_bit(STATUS_ALIVE, &priv->status); + + /* Enable watchdog to monitor the driver tx queues */ + iwl_setup_watchdog(priv); + + if (iwl_is_rfkill(priv)) + return; + + ieee80211_wake_queues(priv->hw); + + priv->active_rate = IWL_RATES_MASK_3945; + + iwl_power_update_mode(priv, true); + + if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) { + struct iwl3945_rxon_cmd *active_rxon = + (struct iwl3945_rxon_cmd *)(&ctx->active); + + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + } else { + /* Initialize our rx_config data */ + iwl_connection_init_rx_config(priv, ctx); + } + + /* Configure Bluetooth device coexistence support */ + priv->cfg->ops->hcmd->send_bt_config(priv); + + set_bit(STATUS_READY, &priv->status); + + /* Configure the adapter for unassociated operation */ + iwl3945_commit_rxon(priv, ctx); + + iwl3945_reg_txpower_periodic(priv); + + IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); + wake_up_interruptible(&priv->wait_command_queue); + + return; + + restart: + queue_work(priv->workqueue, &priv->restart); +} + +static void iwl3945_cancel_deferred_work(struct iwl_priv *priv); + +static void __iwl3945_down(struct iwl_priv *priv) +{ + unsigned long flags; + int exit_pending; + + IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); + + iwl_scan_cancel_timeout(priv, 200); + + exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); + + /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set + * to prevent rearm timer */ + del_timer_sync(&priv->watchdog); + + /* Station information will now be cleared in device */ + iwl_clear_ucode_stations(priv, NULL); + iwl_dealloc_bcast_stations(priv); + iwl_clear_driver_stations(priv); + + /* Unblock any waiting calls */ + wake_up_interruptible_all(&priv->wait_command_queue); + + /* Wipe out the EXIT_PENDING status bit if we are not actually + * exiting the module */ + if (!exit_pending) + clear_bit(STATUS_EXIT_PENDING, &priv->status); + + /* stop and reset the on-board processor */ + iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); + + /* tell the device to stop sending interrupts */ + spin_lock_irqsave(&priv->lock, flags); + iwl_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + iwl_synchronize_irq(priv); + + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + + /* If we have not previously called iwl3945_init() then + * clear all bits but the RF Kill bits and return */ + if (!iwl_is_init(priv)) { + priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << + STATUS_RF_KILL_HW | + test_bit(STATUS_GEO_CONFIGURED, &priv->status) << + STATUS_GEO_CONFIGURED | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; + goto exit; + } + + /* ...otherwise clear out all the status bits but the RF Kill + * bit and continue taking the NIC down. */ + priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << + STATUS_RF_KILL_HW | + test_bit(STATUS_GEO_CONFIGURED, &priv->status) << + STATUS_GEO_CONFIGURED | + test_bit(STATUS_FW_ERROR, &priv->status) << + STATUS_FW_ERROR | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; + + iwl3945_hw_txq_ctx_stop(priv); + iwl3945_hw_rxq_stop(priv); + + /* Power-down device's busmaster DMA clocks */ + iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); + udelay(5); + + /* Stop the device, and put it in low power state */ + iwl_apm_stop(priv); + + exit: + memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); + + if (priv->beacon_skb) + dev_kfree_skb(priv->beacon_skb); + priv->beacon_skb = NULL; + + /* clear out any free frames */ + iwl3945_clear_free_frames(priv); +} + +static void iwl3945_down(struct iwl_priv *priv) +{ + mutex_lock(&priv->mutex); + __iwl3945_down(priv); + mutex_unlock(&priv->mutex); + + iwl3945_cancel_deferred_work(priv); +} + +#define MAX_HW_RESTARTS 5 + +static int iwl3945_alloc_bcast_station(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + unsigned long flags; + u8 sta_id; + + spin_lock_irqsave(&priv->sta_lock, flags); + sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL); + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(priv, "Unable to prepare broadcast station\n"); + spin_unlock_irqrestore(&priv->sta_lock, flags); + + return -EINVAL; + } + + priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE; + priv->stations[sta_id].used |= IWL_STA_BCAST; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + return 0; +} + +static int __iwl3945_up(struct iwl_priv *priv) +{ + int rc, i; + + rc = iwl3945_alloc_bcast_station(priv); + if (rc) + return rc; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); + return -EIO; + } + + if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { + IWL_ERR(priv, "ucode not available for device bring up\n"); + return -EIO; + } + + /* If platform's RF_KILL switch is NOT set to KILL */ + if (iwl_read32(priv, CSR_GP_CNTRL) & + CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + clear_bit(STATUS_RF_KILL_HW, &priv->status); + else { + set_bit(STATUS_RF_KILL_HW, &priv->status); + IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n"); + return -ENODEV; + } + + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); + + rc = iwl3945_hw_nic_init(priv); + if (rc) { + IWL_ERR(priv, "Unable to int nic\n"); + return rc; + } + + /* make sure rfkill handshake bits are cleared */ + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + /* clear (again), then enable host interrupts */ + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); + iwl_enable_interrupts(priv); + + /* really make sure rfkill handshake bits are cleared */ + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + + /* Copy original ucode data image from disk into backup cache. + * This will be used to initialize the on-board processor's + * data SRAM for a clean start when the runtime program first loads. */ + memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, + priv->ucode_data.len); + + /* We return success when we resume from suspend and rf_kill is on. */ + if (test_bit(STATUS_RF_KILL_HW, &priv->status)) + return 0; + + for (i = 0; i < MAX_HW_RESTARTS; i++) { + + /* load bootstrap state machine, + * load bootstrap program into processor's memory, + * prepare to load the "initialize" uCode */ + rc = priv->cfg->ops->lib->load_ucode(priv); + + if (rc) { + IWL_ERR(priv, + "Unable to set up bootstrap uCode: %d\n", rc); + continue; + } + + /* start card; "initialize" will load runtime ucode */ + iwl3945_nic_start(priv); + + IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n"); + + return 0; + } + + set_bit(STATUS_EXIT_PENDING, &priv->status); + __iwl3945_down(priv); + clear_bit(STATUS_EXIT_PENDING, &priv->status); + + /* tried to restart and config the device for as long as our + * patience could withstand */ + IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i); + return -EIO; +} + + +/***************************************************************************** + * + * Workqueue callbacks + * + *****************************************************************************/ + +static void iwl3945_bg_init_alive_start(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, init_alive_start.work); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwl3945_init_alive_start(priv); + mutex_unlock(&priv->mutex); +} + +static void iwl3945_bg_alive_start(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, alive_start.work); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwl3945_alive_start(priv); + mutex_unlock(&priv->mutex); +} + +/* + * 3945 cannot interrupt driver when hardware rf kill switch toggles; + * driver must poll CSR_GP_CNTRL_REG register for change. This register + * *is* readable even when device has been SW_RESET into low power mode + * (e.g. during RF KILL). + */ +static void iwl3945_rfkill_poll(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, _3945.rfkill_poll.work); + bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status); + bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL) + & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); + + if (new_rfkill != old_rfkill) { + if (new_rfkill) + set_bit(STATUS_RF_KILL_HW, &priv->status); + else + clear_bit(STATUS_RF_KILL_HW, &priv->status); + + wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill); + + IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n", + new_rfkill ? "disable radio" : "enable radio"); + } + + /* Keep this running, even if radio now enabled. This will be + * cancelled in mac_start() if system decides to start again */ + queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, + round_jiffies_relative(2 * HZ)); + +} + +int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) +{ + struct iwl_host_cmd cmd = { + .id = REPLY_SCAN_CMD, + .len = sizeof(struct iwl3945_scan_cmd), + .flags = CMD_SIZE_HUGE, + }; + struct iwl3945_scan_cmd *scan; + u8 n_probes = 0; + enum ieee80211_band band; + bool is_active = false; + int ret; + + lockdep_assert_held(&priv->mutex); + + if (!priv->scan_cmd) { + priv->scan_cmd = kmalloc(sizeof(struct iwl3945_scan_cmd) + + IWL_MAX_SCAN_SIZE, GFP_KERNEL); + if (!priv->scan_cmd) { + IWL_DEBUG_SCAN(priv, "Fail to allocate scan memory\n"); + return -ENOMEM; + } + } + scan = priv->scan_cmd; + memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE); + + scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; + scan->quiet_time = IWL_ACTIVE_QUIET_TIME; + + if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) { + u16 interval = 0; + u32 extra; + u32 suspend_time = 100; + u32 scan_suspend_time = 100; + + IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); + + if (priv->is_internal_short_scan) + interval = 0; + else + interval = vif->bss_conf.beacon_int; + + scan->suspend_time = 0; + scan->max_out_time = cpu_to_le32(200 * 1024); + if (!interval) + interval = suspend_time; + /* + * suspend time format: + * 0-19: beacon interval in usec (time before exec.) + * 20-23: 0 + * 24-31: number of beacons (suspend between channels) + */ + + extra = (suspend_time / interval) << 24; + scan_suspend_time = 0xFF0FFFFF & + (extra | ((suspend_time % interval) * 1024)); + + scan->suspend_time = cpu_to_le32(scan_suspend_time); + IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", + scan_suspend_time, interval); + } + + if (priv->is_internal_short_scan) { + IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); + } else if (priv->scan_request->n_ssids) { + int i, p = 0; + IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); + for (i = 0; i < priv->scan_request->n_ssids; i++) { + /* always does wildcard anyway */ + if (!priv->scan_request->ssids[i].ssid_len) + continue; + scan->direct_scan[p].id = WLAN_EID_SSID; + scan->direct_scan[p].len = + priv->scan_request->ssids[i].ssid_len; + memcpy(scan->direct_scan[p].ssid, + priv->scan_request->ssids[i].ssid, + priv->scan_request->ssids[i].ssid_len); + n_probes++; + p++; + } + is_active = true; + } else + IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n"); + + /* We don't build a direct scan probe request; the uCode will do + * that based on the direct_mask added to each channel entry */ + scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; + scan->tx_cmd.sta_id = priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id; + scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + /* flags + rate selection */ + + switch (priv->scan_band) { + case IEEE80211_BAND_2GHZ: + scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; + scan->tx_cmd.rate = IWL_RATE_1M_PLCP; + band = IEEE80211_BAND_2GHZ; + break; + case IEEE80211_BAND_5GHZ: + scan->tx_cmd.rate = IWL_RATE_6M_PLCP; + band = IEEE80211_BAND_5GHZ; + break; + default: + IWL_WARN(priv, "Invalid scan band\n"); + return -EIO; + } + + /* + * If active scaning is requested but a certain channel + * is marked passive, we can do active scanning if we + * detect transmissions. + */ + scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : + IWL_GOOD_CRC_TH_DISABLED; + + if (!priv->is_internal_short_scan) { + scan->tx_cmd.len = cpu_to_le16( + iwl_fill_probe_req(priv, + (struct ieee80211_mgmt *)scan->data, + vif->addr, + priv->scan_request->ie, + priv->scan_request->ie_len, + IWL_MAX_SCAN_SIZE - sizeof(*scan))); + } else { + /* use bcast addr, will not be transmitted but must be valid */ + scan->tx_cmd.len = cpu_to_le16( + iwl_fill_probe_req(priv, + (struct ieee80211_mgmt *)scan->data, + iwl_bcast_addr, NULL, 0, + IWL_MAX_SCAN_SIZE - sizeof(*scan))); + } + /* select Rx antennas */ + scan->flags |= iwl3945_get_antenna_flags(priv); + + if (priv->is_internal_short_scan) { + scan->channel_count = + iwl3945_get_single_channel_for_scan(priv, vif, band, + (void *)&scan->data[le16_to_cpu( + scan->tx_cmd.len)]); + } else { + scan->channel_count = + iwl3945_get_channels_for_scan(priv, band, is_active, n_probes, + (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif); + } + + if (scan->channel_count == 0) { + IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); + return -EIO; + } + + cmd.len += le16_to_cpu(scan->tx_cmd.len) + + scan->channel_count * sizeof(struct iwl3945_scan_channel); + cmd.data = scan; + scan->len = cpu_to_le16(cmd.len); + + set_bit(STATUS_SCAN_HW, &priv->status); + ret = iwl_send_cmd_sync(priv, &cmd); + if (ret) + clear_bit(STATUS_SCAN_HW, &priv->status); + return ret; +} + +void iwl3945_post_scan(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + /* + * Since setting the RXON may have been deferred while + * performing the scan, fire one off if needed + */ + if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) + iwl3945_commit_rxon(priv, ctx); +} + +static void iwl3945_bg_restart(struct work_struct *data) +{ + struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) { + struct iwl_rxon_context *ctx; + mutex_lock(&priv->mutex); + for_each_context(priv, ctx) + ctx->vif = NULL; + priv->is_open = 0; + mutex_unlock(&priv->mutex); + iwl3945_down(priv); + ieee80211_restart_hw(priv->hw); + } else { + iwl3945_down(priv); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + __iwl3945_up(priv); + mutex_unlock(&priv->mutex); + } +} + +static void iwl3945_bg_rx_replenish(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, rx_replenish); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwl3945_rx_replenish(priv); + mutex_unlock(&priv->mutex); +} + +void iwl3945_post_associate(struct iwl_priv *priv) +{ + int rc = 0; + struct ieee80211_conf *conf = NULL; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + if (!ctx->vif || !priv->is_open) + return; + + if (ctx->vif->type == NL80211_IFTYPE_AP) { + IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__); + return; + } + + IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n", + ctx->vif->bss_conf.aid, ctx->active.bssid_addr); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + iwl_scan_cancel_timeout(priv, 200); + + conf = ieee80211_get_hw_conf(priv->hw); + + ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl3945_commit_rxon(priv, ctx); + + rc = iwl_send_rxon_timing(priv, ctx); + if (rc) + IWL_WARN(priv, "REPLY_RXON_TIMING failed - " + "Attempting to continue.\n"); + + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + + ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid); + + IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n", + ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int); + + if (ctx->vif->bss_conf.use_short_preamble) + ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { + if (ctx->vif->bss_conf.use_short_slot) + ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + } + + iwl3945_commit_rxon(priv, ctx); + + switch (ctx->vif->type) { + case NL80211_IFTYPE_STATION: + iwl3945_rate_scale_init(priv->hw, IWL_AP_ID); + break; + case NL80211_IFTYPE_ADHOC: + iwl3945_send_beacon_cmd(priv); + break; + default: + IWL_ERR(priv, "%s Should not be called in %d mode\n", + __func__, ctx->vif->type); + break; + } +} + +/***************************************************************************** + * + * mac80211 entry point functions + * + *****************************************************************************/ + +#define UCODE_READY_TIMEOUT (2 * HZ) + +static int iwl3945_mac_start(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = hw->priv; + int ret; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + /* we should be verifying the device is ready to be opened */ + mutex_lock(&priv->mutex); + + /* fetch ucode file from disk, alloc and copy to bus-master buffers ... + * ucode filename and max sizes are card-specific. */ + + if (!priv->ucode_code.len) { + ret = iwl3945_read_ucode(priv); + if (ret) { + IWL_ERR(priv, "Could not read microcode: %d\n", ret); + mutex_unlock(&priv->mutex); + goto out_release_irq; + } + } + + ret = __iwl3945_up(priv); + + mutex_unlock(&priv->mutex); + + if (ret) + goto out_release_irq; + + IWL_DEBUG_INFO(priv, "Start UP work.\n"); + + /* Wait for START_ALIVE from ucode. Otherwise callbacks from + * mac80211 will not be run successfully. */ + ret = wait_event_interruptible_timeout(priv->wait_command_queue, + test_bit(STATUS_READY, &priv->status), + UCODE_READY_TIMEOUT); + if (!ret) { + if (!test_bit(STATUS_READY, &priv->status)) { + IWL_ERR(priv, + "Wait for START_ALIVE timeout after %dms.\n", + jiffies_to_msecs(UCODE_READY_TIMEOUT)); + ret = -ETIMEDOUT; + goto out_release_irq; + } + } + + /* ucode is running and will send rfkill notifications, + * no need to poll the killswitch state anymore */ + cancel_delayed_work(&priv->_3945.rfkill_poll); + + priv->is_open = 1; + IWL_DEBUG_MAC80211(priv, "leave\n"); + return 0; + +out_release_irq: + priv->is_open = 0; + IWL_DEBUG_MAC80211(priv, "leave - failed\n"); + return ret; +} + +static void iwl3945_mac_stop(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + if (!priv->is_open) { + IWL_DEBUG_MAC80211(priv, "leave - skip\n"); + return; + } + + priv->is_open = 0; + + iwl3945_down(priv); + + flush_workqueue(priv->workqueue); + + /* start polling the killswitch state again */ + queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, + round_jiffies_relative(2 * HZ)); + + IWL_DEBUG_MAC80211(priv, "leave\n"); +} + +static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, + ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); + + if (iwl3945_tx_skb(priv, skb)) + dev_kfree_skb_any(skb); + + IWL_DEBUG_MAC80211(priv, "leave\n"); + return NETDEV_TX_OK; +} + +void iwl3945_config_ap(struct iwl_priv *priv) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct ieee80211_vif *vif = ctx->vif; + int rc = 0; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + /* The following should be done only at AP bring up */ + if (!(iwl_is_associated(priv, IWL_RXON_CTX_BSS))) { + + /* RXON - unassoc (to set timing command) */ + ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl3945_commit_rxon(priv, ctx); + + /* RXON Timing */ + rc = iwl_send_rxon_timing(priv, ctx); + if (rc) + IWL_WARN(priv, "REPLY_RXON_TIMING failed - " + "Attempting to continue.\n"); + + ctx->staging.assoc_id = 0; + + if (vif->bss_conf.use_short_preamble) + ctx->staging.flags |= + RXON_FLG_SHORT_PREAMBLE_MSK; + else + ctx->staging.flags &= + ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { + if (vif->bss_conf.use_short_slot) + ctx->staging.flags |= + RXON_FLG_SHORT_SLOT_MSK; + else + ctx->staging.flags &= + ~RXON_FLG_SHORT_SLOT_MSK; + } + /* restore RXON assoc */ + ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; + iwl3945_commit_rxon(priv, ctx); + } + iwl3945_send_beacon_cmd(priv); + + /* FIXME - we need to add code here to detect a totally new + * configuration, reset the AP, unassoc, rxon timing, assoc, + * clear sta table, add BCAST sta... */ +} + +static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct iwl_priv *priv = hw->priv; + int ret = 0; + u8 sta_id = IWL_INVALID_STATION; + u8 static_key; + + IWL_DEBUG_MAC80211(priv, "enter\n"); + + if (iwl3945_mod_params.sw_crypto) { + IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); + return -EOPNOTSUPP; + } + + /* + * To support IBSS RSN, don't program group keys in IBSS, the + * hardware will then not attempt to decrypt the frames. + */ + if (vif->type == NL80211_IFTYPE_ADHOC && + !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + return -EOPNOTSUPP; + + static_key = !iwl_is_associated(priv, IWL_RXON_CTX_BSS); + + if (!static_key) { + sta_id = iwl_sta_id_or_broadcast( + priv, &priv->contexts[IWL_RXON_CTX_BSS], sta); + if (sta_id == IWL_INVALID_STATION) + return -EINVAL; + } + + mutex_lock(&priv->mutex); + iwl_scan_cancel_timeout(priv, 100); + + switch (cmd) { + case SET_KEY: + if (static_key) + ret = iwl3945_set_static_key(priv, key); + else + ret = iwl3945_set_dynamic_key(priv, key, sta_id); + IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); + break; + case DISABLE_KEY: + if (static_key) + ret = iwl3945_remove_static_key(priv); + else + ret = iwl3945_clear_sta_key_info(priv, sta_id); + IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); + + return ret; +} + +static int iwl3945_mac_sta_add(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct iwl_priv *priv = hw->priv; + struct iwl3945_sta_priv *sta_priv = (void *)sta->drv_priv; + int ret; + bool is_ap = vif->type == NL80211_IFTYPE_STATION; + u8 sta_id; + + IWL_DEBUG_INFO(priv, "received request to add station %pM\n", + sta->addr); + mutex_lock(&priv->mutex); + IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", + sta->addr); + sta_priv->common.sta_id = IWL_INVALID_STATION; + + + ret = iwl_add_station_common(priv, &priv->contexts[IWL_RXON_CTX_BSS], + sta->addr, is_ap, sta, &sta_id); + if (ret) { + IWL_ERR(priv, "Unable to add station %pM (%d)\n", + sta->addr, ret); + /* Should we return success if return code is EEXIST ? */ + mutex_unlock(&priv->mutex); + return ret; + } + + sta_priv->common.sta_id = sta_id; + + /* Initialize rate scaling */ + IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", + sta->addr); + iwl3945_rs_rate_init(priv, sta, sta_id); + mutex_unlock(&priv->mutex); + + return 0; +} + +static void iwl3945_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct iwl_priv *priv = hw->priv; + __le32 filter_or = 0, filter_nand = 0; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + +#define CHK(test, flag) do { \ + if (*total_flags & (test)) \ + filter_or |= (flag); \ + else \ + filter_nand |= (flag); \ + } while (0) + + IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", + changed_flags, *total_flags); + + CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); + CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); + CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); + +#undef CHK + + mutex_lock(&priv->mutex); + + ctx->staging.filter_flags &= ~filter_nand; + ctx->staging.filter_flags |= filter_or; + + /* + * Not committing directly because hardware can perform a scan, + * but even if hw is ready, committing here breaks for some reason, + * we'll eventually commit the filter flags change anyway. + */ + + mutex_unlock(&priv->mutex); + + /* + * Receiving all multicast frames is always enabled by the + * default flags setup in iwl_connection_init_rx_config() + * since we currently do not support programming multicast + * filters into the device. + */ + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; +} + + +/***************************************************************************** + * + * sysfs attributes + * + *****************************************************************************/ + +#ifdef CONFIG_IWLWIFI_DEBUG + +/* + * The following adds a new attribute to the sysfs representation + * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) + * used for controlling the debug level. + * + * See the level definitions in iwl for details. + * + * The debug_level being managed using sysfs below is a per device debug + * level that is used instead of the global debug level if it (the per + * device debug level) is set. + */ +static ssize_t show_debug_level(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv)); +} +static ssize_t store_debug_level(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 0, &val); + if (ret) + IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf); + else { + priv->debug_level = val; + if (iwl_alloc_traffic_mem(priv)) + IWL_ERR(priv, + "Not enough memory to generate traffic log\n"); + } + return strnlen(buf, count); +} + +static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, + show_debug_level, store_debug_level); + +#endif /* CONFIG_IWLWIFI_DEBUG */ + +static ssize_t show_temperature(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv)); +} + +static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); + +static ssize_t show_tx_power(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + return sprintf(buf, "%d\n", priv->tx_power_user_lmt); +} + +static ssize_t store_tx_power(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + char *p = (char *)buf; + u32 val; + + val = simple_strtoul(p, &p, 10); + if (p == buf) + IWL_INFO(priv, ": %s is not in decimal form.\n", buf); + else + iwl3945_hw_reg_set_txpower(priv, val); + + return count; +} + +static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); + +static ssize_t show_flags(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + return sprintf(buf, "0x%04X\n", ctx->active.flags); +} + +static ssize_t store_flags(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + u32 flags = simple_strtoul(buf, NULL, 0); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + mutex_lock(&priv->mutex); + if (le32_to_cpu(ctx->staging.flags) != flags) { + /* Cancel any currently running scans... */ + if (iwl_scan_cancel_timeout(priv, 100)) + IWL_WARN(priv, "Could not cancel scan.\n"); + else { + IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n", + flags); + ctx->staging.flags = cpu_to_le32(flags); + iwl3945_commit_rxon(priv, ctx); + } + } + mutex_unlock(&priv->mutex); + + return count; +} + +static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); + +static ssize_t show_filter_flags(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + + return sprintf(buf, "0x%04X\n", + le32_to_cpu(ctx->active.filter_flags)); +} + +static ssize_t store_filter_flags(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + u32 filter_flags = simple_strtoul(buf, NULL, 0); + + mutex_lock(&priv->mutex); + if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) { + /* Cancel any currently running scans... */ + if (iwl_scan_cancel_timeout(priv, 100)) + IWL_WARN(priv, "Could not cancel scan.\n"); + else { + IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = " + "0x%04X\n", filter_flags); + ctx->staging.filter_flags = + cpu_to_le32(filter_flags); + iwl3945_commit_rxon(priv, ctx); + } + } + mutex_unlock(&priv->mutex); + + return count; +} + +static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, + store_filter_flags); + +static ssize_t show_measurement(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct iwl_spectrum_notification measure_report; + u32 size = sizeof(measure_report), len = 0, ofs = 0; + u8 *data = (u8 *)&measure_report; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (!(priv->measurement_status & MEASUREMENT_READY)) { + spin_unlock_irqrestore(&priv->lock, flags); + return 0; + } + memcpy(&measure_report, &priv->measure_report, size); + priv->measurement_status = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + while (size && (PAGE_SIZE - len)) { + hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, + PAGE_SIZE - len, 1); + len = strlen(buf); + if (PAGE_SIZE - len) + buf[len++] = '\n'; + + ofs += 16; + size -= min(size, 16U); + } + + return len; +} + +static ssize_t store_measurement(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + struct ieee80211_measurement_params params = { + .channel = le16_to_cpu(ctx->active.channel), + .start_time = cpu_to_le64(priv->_3945.last_tsf), + .duration = cpu_to_le16(1), + }; + u8 type = IWL_MEASURE_BASIC; + u8 buffer[32]; + u8 channel; + + if (count) { + char *p = buffer; + strncpy(buffer, buf, min(sizeof(buffer), count)); + channel = simple_strtoul(p, NULL, 0); + if (channel) + params.channel = channel; + + p = buffer; + while (*p && *p != ' ') + p++; + if (*p) + type = simple_strtoul(p + 1, NULL, 0); + } + + IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on " + "channel %d (for '%s')\n", type, params.channel, buf); + iwl3945_get_measurement(priv, ¶ms, type); + + return count; +} + +static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, + show_measurement, store_measurement); + +static ssize_t store_retry_rate(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + + priv->retry_rate = simple_strtoul(buf, NULL, 0); + if (priv->retry_rate <= 0) + priv->retry_rate = 1; + + return count; +} + +static ssize_t show_retry_rate(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + return sprintf(buf, "%d", priv->retry_rate); +} + +static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, + store_retry_rate); + + +static ssize_t show_channels(struct device *d, + struct device_attribute *attr, char *buf) +{ + /* all this shit doesn't belong into sysfs anyway */ + return 0; +} + +static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL); + +static ssize_t show_antenna(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + return sprintf(buf, "%d\n", iwl3945_mod_params.antenna); +} + +static ssize_t store_antenna(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d); + int ant; + + if (count == 0) + return 0; + + if (sscanf(buf, "%1i", &ant) != 1) { + IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n"); + return count; + } + + if ((ant >= 0) && (ant <= 2)) { + IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant); + iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant; + } else + IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant); + + + return count; +} + +static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna); + +static ssize_t show_status(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + if (!iwl_is_alive(priv)) + return -EAGAIN; + return sprintf(buf, "0x%08x\n", (int)priv->status); +} + +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +static ssize_t dump_error_log(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + char *p = (char *)buf; + + if (p[0] == '1') + iwl3945_dump_nic_error_log(priv); + + return strnlen(buf, count); +} + +static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log); + +/***************************************************************************** + * + * driver setup and tear down + * + *****************************************************************************/ + +static void iwl3945_setup_deferred_work(struct iwl_priv *priv) +{ + priv->workqueue = create_singlethread_workqueue(DRV_NAME); + + init_waitqueue_head(&priv->wait_command_queue); + + INIT_WORK(&priv->restart, iwl3945_bg_restart); + INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish); + INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update); + INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start); + INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start); + INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll); + + iwl_setup_scan_deferred_work(priv); + + iwl3945_hw_setup_deferred_work(priv); + + init_timer(&priv->watchdog); + priv->watchdog.data = (unsigned long)priv; + priv->watchdog.function = iwl_bg_watchdog; + + tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) + iwl3945_irq_tasklet, (unsigned long)priv); +} + +static void iwl3945_cancel_deferred_work(struct iwl_priv *priv) +{ + iwl3945_hw_cancel_deferred_work(priv); + + cancel_delayed_work_sync(&priv->init_alive_start); + cancel_delayed_work(&priv->alive_start); + cancel_work_sync(&priv->beacon_update); + + iwl_cancel_scan_deferred_work(priv); +} + +static struct attribute *iwl3945_sysfs_entries[] = { + &dev_attr_antenna.attr, + &dev_attr_channels.attr, + &dev_attr_dump_errors.attr, + &dev_attr_flags.attr, + &dev_attr_filter_flags.attr, + &dev_attr_measurement.attr, + &dev_attr_retry_rate.attr, + &dev_attr_status.attr, + &dev_attr_temperature.attr, + &dev_attr_tx_power.attr, +#ifdef CONFIG_IWLWIFI_DEBUG + &dev_attr_debug_level.attr, +#endif + NULL +}; + +static struct attribute_group iwl3945_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = iwl3945_sysfs_entries, +}; + +struct ieee80211_ops iwl3945_hw_ops = { + .tx = iwl3945_mac_tx, + .start = iwl3945_mac_start, + .stop = iwl3945_mac_stop, + .add_interface = iwl_mac_add_interface, + .remove_interface = iwl_mac_remove_interface, + .change_interface = iwl_mac_change_interface, + .config = iwl_legacy_mac_config, + .configure_filter = iwl3945_configure_filter, + .set_key = iwl3945_mac_set_key, + .conf_tx = iwl_mac_conf_tx, + .reset_tsf = iwl_legacy_mac_reset_tsf, + .bss_info_changed = iwl_legacy_mac_bss_info_changed, + .hw_scan = iwl_mac_hw_scan, + .sta_add = iwl3945_mac_sta_add, + .sta_remove = iwl_mac_sta_remove, + .tx_last_beacon = iwl_mac_tx_last_beacon, +}; + +static int iwl3945_init_drv(struct iwl_priv *priv) +{ + int ret; + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + + priv->retry_rate = 1; + priv->beacon_skb = NULL; + + spin_lock_init(&priv->sta_lock); + spin_lock_init(&priv->hcmd_lock); + + INIT_LIST_HEAD(&priv->free_frames); + + mutex_init(&priv->mutex); + mutex_init(&priv->sync_cmd_mutex); + + priv->ieee_channels = NULL; + priv->ieee_rates = NULL; + priv->band = IEEE80211_BAND_2GHZ; + + priv->iw_mode = NL80211_IFTYPE_STATION; + priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; + + /* initialize force reset */ + priv->force_reset[IWL_RF_RESET].reset_duration = + IWL_DELAY_NEXT_FORCE_RF_RESET; + priv->force_reset[IWL_FW_RESET].reset_duration = + IWL_DELAY_NEXT_FORCE_FW_RELOAD; + + + priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER; + priv->tx_power_next = IWL_DEFAULT_TX_POWER; + + if (eeprom->version < EEPROM_3945_EEPROM_VERSION) { + IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n", + eeprom->version); + ret = -EINVAL; + goto err; + } + ret = iwl_init_channel_map(priv); + if (ret) { + IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); + goto err; + } + + /* Set up txpower settings in driver for all channels */ + if (iwl3945_txpower_set_from_eeprom(priv)) { + ret = -EIO; + goto err_free_channel_map; + } + + ret = iwlcore_init_geos(priv); + if (ret) { + IWL_ERR(priv, "initializing geos failed: %d\n", ret); + goto err_free_channel_map; + } + iwl3945_init_hw_rates(priv, priv->ieee_rates); + + return 0; + +err_free_channel_map: + iwl_free_channel_map(priv); +err: + return ret; +} + +#define IWL3945_MAX_PROBE_REQUEST 200 + +static int iwl3945_setup_mac(struct iwl_priv *priv) +{ + int ret; + struct ieee80211_hw *hw = priv->hw; + + hw->rate_control_algorithm = "iwl-3945-rs"; + hw->sta_data_size = sizeof(struct iwl3945_sta_priv); + hw->vif_data_size = sizeof(struct iwl_vif_priv); + + /* Tell mac80211 our characteristics */ + hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SPECTRUM_MGMT; + + if (!priv->cfg->base_params->broken_powersave) + hw->flags |= IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS; + + hw->wiphy->interface_modes = + priv->contexts[IWL_RXON_CTX_BSS].interface_modes; + + hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | + WIPHY_FLAG_DISABLE_BEACON_HINTS | + WIPHY_FLAG_IBSS_RSN; + + hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945; + /* we create the 802.11 header and a zero-length SSID element */ + hw->wiphy->max_scan_ie_len = IWL3945_MAX_PROBE_REQUEST - 24 - 2; + + /* Default value; 4 EDCA QOS priorities */ + hw->queues = 4; + + if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &priv->bands[IEEE80211_BAND_2GHZ]; + + if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &priv->bands[IEEE80211_BAND_5GHZ]; + + iwl_leds_init(priv); + + ret = ieee80211_register_hw(priv->hw); + if (ret) { + IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); + return ret; + } + priv->mac80211_registered = 1; + + return 0; +} + +static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err = 0, i; + struct iwl_priv *priv; + struct ieee80211_hw *hw; + struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); + struct iwl3945_eeprom *eeprom; + unsigned long flags; + + /*********************** + * 1. Allocating HW data + * ********************/ + + /* mac80211 allocates memory for this device instance, including + * space for this driver's private structure */ + hw = iwl_alloc_all(cfg); + if (hw == NULL) { + pr_err("Can not allocate network device\n"); + err = -ENOMEM; + goto out; + } + priv = hw->priv; + SET_IEEE80211_DEV(hw, &pdev->dev); + + priv->cmd_queue = IWL39_CMD_QUEUE_NUM; + + /* 3945 has only one valid context */ + priv->valid_contexts = BIT(IWL_RXON_CTX_BSS); + + for (i = 0; i < NUM_IWL_RXON_CTX; i++) + priv->contexts[i].ctxid = i; + + priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; + priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; + priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; + priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; + priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; + priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; + priv->contexts[IWL_RXON_CTX_BSS].interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; + priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; + priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; + + /* + * Disabling hardware scan means that mac80211 will perform scans + * "the hard way", rather than using device's scan. + */ + if (iwl3945_mod_params.disable_hw_scan) { + dev_printk(KERN_DEBUG, &(pdev->dev), + "sw scan support is deprecated\n"); + iwl3945_hw_ops.hw_scan = NULL; + } + + + IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); + priv->cfg = cfg; + priv->pci_dev = pdev; + priv->inta_mask = CSR_INI_SET_MASK; + + if (iwl_alloc_traffic_mem(priv)) + IWL_ERR(priv, "Not enough memory to generate traffic log\n"); + + /*************************** + * 2. Initializing PCI bus + * *************************/ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | + PCIE_LINK_STATE_CLKPM); + + if (pci_enable_device(pdev)) { + err = -ENODEV; + goto out_ieee80211_free_hw; + } + + pci_set_master(pdev); + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + IWL_WARN(priv, "No suitable DMA available.\n"); + goto out_pci_disable_device; + } + + pci_set_drvdata(pdev, priv); + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto out_pci_disable_device; + + /*********************** + * 3. Read REV Register + * ********************/ + priv->hw_base = pci_iomap(pdev, 0, 0); + if (!priv->hw_base) { + err = -ENODEV; + goto out_pci_release_regions; + } + + IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n", + (unsigned long long) pci_resource_len(pdev, 0)); + IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); + + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_write_config_byte(pdev, 0x41, 0x00); + + /* these spin locks will be used in apm_ops.init and EEPROM access + * we should init now + */ + spin_lock_init(&priv->reg_lock); + spin_lock_init(&priv->lock); + + /* + * stop and reset the on-board processor just in case it is in a + * strange state ... like being left stranded by a primary kernel + * and this is now the kdump kernel trying to start up + */ + iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); + + /*********************** + * 4. Read EEPROM + * ********************/ + + /* Read the EEPROM */ + err = iwl_eeprom_init(priv); + if (err) { + IWL_ERR(priv, "Unable to init EEPROM\n"); + goto out_iounmap; + } + /* MAC Address location in EEPROM same for 3945/4965 */ + eeprom = (struct iwl3945_eeprom *)priv->eeprom; + IWL_DEBUG_INFO(priv, "MAC address: %pM\n", eeprom->mac_address); + SET_IEEE80211_PERM_ADDR(priv->hw, eeprom->mac_address); + + /*********************** + * 5. Setup HW Constants + * ********************/ + /* Device-specific setup */ + if (iwl3945_hw_set_hw_params(priv)) { + IWL_ERR(priv, "failed to set hw settings\n"); + goto out_eeprom_free; + } + + /*********************** + * 6. Setup priv + * ********************/ + + err = iwl3945_init_drv(priv); + if (err) { + IWL_ERR(priv, "initializing driver failed\n"); + goto out_unset_hw_params; + } + + IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n", + priv->cfg->name); + + /*********************** + * 7. Setup Services + * ********************/ + + spin_lock_irqsave(&priv->lock, flags); + iwl_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + pci_enable_msi(priv->pci_dev); + + err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr, + IRQF_SHARED, DRV_NAME, priv); + if (err) { + IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq); + goto out_disable_msi; + } + + err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group); + if (err) { + IWL_ERR(priv, "failed to create sysfs device attributes\n"); + goto out_release_irq; + } + + iwl_set_rxon_channel(priv, + &priv->bands[IEEE80211_BAND_2GHZ].channels[5], + &priv->contexts[IWL_RXON_CTX_BSS]); + iwl3945_setup_deferred_work(priv); + iwl3945_setup_rx_handlers(priv); + iwl_power_initialize(priv); + + /********************************* + * 8. Setup and Register mac80211 + * *******************************/ + + iwl_enable_interrupts(priv); + + err = iwl3945_setup_mac(priv); + if (err) + goto out_remove_sysfs; + + err = iwl_dbgfs_register(priv, DRV_NAME); + if (err) + IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err); + + /* Start monitoring the killswitch */ + queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, + 2 * HZ); + + return 0; + + out_remove_sysfs: + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); + out_release_irq: + free_irq(priv->pci_dev->irq, priv); + out_disable_msi: + pci_disable_msi(priv->pci_dev); + iwlcore_free_geos(priv); + iwl_free_channel_map(priv); + out_unset_hw_params: + iwl3945_unset_hw_params(priv); + out_eeprom_free: + iwl_eeprom_free(priv); + out_iounmap: + pci_iounmap(pdev, priv->hw_base); + out_pci_release_regions: + pci_release_regions(pdev); + out_pci_disable_device: + pci_set_drvdata(pdev, NULL); + pci_disable_device(pdev); + out_ieee80211_free_hw: + iwl_free_traffic_mem(priv); + ieee80211_free_hw(priv->hw); + out: + return err; +} + +static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) +{ + struct iwl_priv *priv = pci_get_drvdata(pdev); + unsigned long flags; + + if (!priv) + return; + + IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); + + iwl_dbgfs_unregister(priv); + + set_bit(STATUS_EXIT_PENDING, &priv->status); + + iwl_leds_exit(priv); + + if (priv->mac80211_registered) { + ieee80211_unregister_hw(priv->hw); + priv->mac80211_registered = 0; + } else { + iwl3945_down(priv); + } + + /* + * Make sure device is reset to low power before unloading driver. + * This may be redundant with iwl_down(), but there are paths to + * run iwl_down() without calling apm_ops.stop(), and there are + * paths to avoid running iwl_down() at all before leaving driver. + * This (inexpensive) call *makes sure* device is reset. + */ + iwl_apm_stop(priv); + + /* make sure we flush any pending irq or + * tasklet for the driver + */ + spin_lock_irqsave(&priv->lock, flags); + iwl_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_synchronize_irq(priv); + + sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); + + cancel_delayed_work_sync(&priv->_3945.rfkill_poll); + + iwl3945_dealloc_ucode_pci(priv); + + if (priv->rxq.bd) + iwl3945_rx_queue_free(priv, &priv->rxq); + iwl3945_hw_txq_ctx_free(priv); + + iwl3945_unset_hw_params(priv); + + /*netif_stop_queue(dev); */ + flush_workqueue(priv->workqueue); + + /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes + * priv->workqueue... so we can't take down the workqueue + * until now... */ + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + iwl_free_traffic_mem(priv); + + free_irq(pdev->irq, priv); + pci_disable_msi(pdev); + + pci_iounmap(pdev, priv->hw_base); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + + iwl_free_channel_map(priv); + iwlcore_free_geos(priv); + kfree(priv->scan_cmd); + if (priv->beacon_skb) + dev_kfree_skb(priv->beacon_skb); + + ieee80211_free_hw(priv->hw); +} + + +/***************************************************************************** + * + * driver and module entry point + * + *****************************************************************************/ + +static struct pci_driver iwl3945_driver = { + .name = DRV_NAME, + .id_table = iwl3945_hw_card_ids, + .probe = iwl3945_pci_probe, + .remove = __devexit_p(iwl3945_pci_remove), + .driver.pm = IWL_PM_OPS, +}; + +static int __init iwl3945_init(void) +{ + + int ret; + pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); + pr_info(DRV_COPYRIGHT "\n"); + + ret = iwl3945_rate_control_register(); + if (ret) { + pr_err("Unable to register rate control algorithm: %d\n", ret); + return ret; + } + + ret = pci_register_driver(&iwl3945_driver); + if (ret) { + pr_err("Unable to initialize PCI module\n"); + goto error_register; + } + + return ret; + +error_register: + iwl3945_rate_control_unregister(); + return ret; +} + +static void __exit iwl3945_exit(void) +{ + pci_unregister_driver(&iwl3945_driver); + iwl3945_rate_control_unregister(); +} + +MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX)); + +module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO); +MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); +module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO); +MODULE_PARM_DESC(swcrypto, + "using software crypto (default 1 [software])\n"); +#ifdef CONFIG_IWLWIFI_DEBUG +module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "debug output mask"); +#endif +module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, + int, S_IRUGO); +MODULE_PARM_DESC(disable_hw_scan, + "disable hardware scanning (default 0) (deprecated)"); +module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, S_IRUGO); +MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error"); + +module_exit(iwl3945_exit); +module_init(iwl3945_init); -- cgit v1.2.3