From 750a986d6a69f3f9ed7913bab8c6d171f291ebe6 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:13 +0200 Subject: wl18xx: change fw name and temporarily fail loading The new fw (8.5.0.0.28) is not backward compatible with older drivers. Use a new fw name (along with bumping the min fw version), and add some code to fail any boot attempt during the fw api alignment patches (as the driver is not functional in these transitional patches). This code will be removed after the api alignment will be done. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 6 +++++- drivers/net/wireless/ti/wl18xx/wl18xx.h | 4 ++-- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a39682a7c25f..8ba1c9387a14 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -595,7 +595,7 @@ static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = { }; /* TODO: maybe move to a new header file? */ -#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw.bin" +#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-2.bin" static int wl18xx_identify_chip(struct wl1271 *wl) { @@ -1385,6 +1385,10 @@ static int wl18xx_setup(struct wl1271 *wl) struct wl18xx_priv *priv = wl->priv; int ret; + wl1271_error("driver is in transitional commit (due to fw api" + "change) and can't be booted!"); + return -EINVAL; + wl->rtable = wl18xx_rtable; wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS; diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index 96a1e438d677..4d295a574a87 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -26,10 +26,10 @@ /* minimum FW required for driver */ #define WL18XX_CHIP_VER 8 -#define WL18XX_IFTYPE_VER 2 +#define WL18XX_IFTYPE_VER 5 #define WL18XX_MAJOR_VER 0 #define WL18XX_SUBTYPE_VER 0 -#define WL18XX_MINOR_VER 100 +#define WL18XX_MINOR_VER 28 #define WL18XX_CMD_MAX_SIZE 740 -- cgit v1.2.3 From 78e28062fea51c62280cd17fe6143ed583f83ba0 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:15 +0200 Subject: wlcore: split 18xx and 12xx scan mechanism The scan APIs of 12xx and 18xx are totally different. Use some common functions as much as possible (e.g. for setting scan channels), but split scan.c into chip-specific scan.c files, each implementing its own scan mechanism. (in other words - move most of the current wlcore's scan.c into wl12xx, and implement a similar mechanism in 18xx, according to the new api) New wlcore ops are introduced in order to call the chip-specific scan functions. The template indices used for each scan (regular/scheduled) are also different between the chips, so set the correct indices used for each scan type after identifying the chip. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/Makefile | 2 +- drivers/net/wireless/ti/wl12xx/main.c | 11 + drivers/net/wireless/ti/wl12xx/scan.c | 500 +++++++++++++++++++++++++++++++ drivers/net/wireless/ti/wl12xx/scan.h | 138 +++++++++ drivers/net/wireless/ti/wl18xx/Makefile | 2 +- drivers/net/wireless/ti/wl18xx/main.c | 13 +- drivers/net/wireless/ti/wl18xx/scan.c | 320 ++++++++++++++++++++ drivers/net/wireless/ti/wl18xx/scan.h | 120 ++++++++ drivers/net/wireless/ti/wlcore/cmd.c | 12 +- drivers/net/wireless/ti/wlcore/cmd.h | 6 +- drivers/net/wireless/ti/wlcore/event.c | 4 +- drivers/net/wireless/ti/wlcore/init.c | 10 +- drivers/net/wireless/ti/wlcore/main.c | 15 +- drivers/net/wireless/ti/wlcore/scan.c | 513 +++----------------------------- drivers/net/wireless/ti/wlcore/scan.h | 127 ++------ drivers/net/wireless/ti/wlcore/tx.c | 1 + drivers/net/wireless/ti/wlcore/wlcore.h | 13 + 17 files changed, 1209 insertions(+), 598 deletions(-) create mode 100644 drivers/net/wireless/ti/wl12xx/scan.c create mode 100644 drivers/net/wireless/ti/wl12xx/scan.h create mode 100644 drivers/net/wireless/ti/wl18xx/scan.c create mode 100644 drivers/net/wireless/ti/wl18xx/scan.h (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/Makefile b/drivers/net/wireless/ti/wl12xx/Makefile index da509aa7d009..8d9afd238adc 100644 --- a/drivers/net/wireless/ti/wl12xx/Makefile +++ b/drivers/net/wireless/ti/wl12xx/Makefile @@ -1,3 +1,3 @@ -wl12xx-objs = main.o cmd.o acx.o debugfs.o +wl12xx-objs = main.o cmd.o acx.o debugfs.o scan.o obj-$(CONFIG_WL12XX) += wl12xx.o diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 6c9fba486795..ada7031777cc 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -38,6 +38,7 @@ #include "reg.h" #include "cmd.h" #include "acx.h" +#include "scan.h" #include "debugfs.h" static char *fref_param; @@ -698,6 +699,11 @@ static int wl12xx_identify_chip(struct wl1271 *wl) goto out; } + /* common settings */ + wl->scan_templ_id_2_4 = CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY; + wl->scan_templ_id_5 = CMD_TEMPL_APP_PROBE_REQ_5_LEGACY; + wl->sched_scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; + wl->sched_scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; out: return ret; } @@ -1618,6 +1624,11 @@ static struct wlcore_ops wl12xx_ops = { .set_rx_csum = NULL, .ap_get_mimo_wide_rate_mask = NULL, .debugfs_init = wl12xx_debugfs_add_files, + .scan_start = wl12xx_scan_start, + .scan_stop = wl12xx_scan_stop, + .scan_completed = wl12xx_scan_completed, + .sched_scan_start = wl12xx_sched_scan_start, + .sched_scan_stop = wl12xx_scan_sched_scan_stop, .get_spare_blocks = wl12xx_get_spare_blocks, .set_key = wl12xx_set_key, .pre_pkt_send = NULL, diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c new file mode 100644 index 000000000000..a99e8764162d --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/scan.c @@ -0,0 +1,500 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include "scan.h" +#include "../wlcore/debug.h" +#include "../wlcore/tx.h" + +static int wl1271_get_scan_channels(struct wl1271 *wl, + struct cfg80211_scan_request *req, + struct basic_scan_channel_params *channels, + enum ieee80211_band band, bool passive) +{ + struct conf_scan_settings *c = &wl->conf.scan; + int i, j; + u32 flags; + + for (i = 0, j = 0; + i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; + i++) { + flags = req->channels[i]->flags; + + if (!test_bit(i, wl->scan.scanned_ch) && + !(flags & IEEE80211_CHAN_DISABLED) && + (req->channels[i]->band == band) && + /* + * In passive scans, we scan all remaining + * channels, even if not marked as such. + * In active scans, we only scan channels not + * marked as passive. + */ + (passive || !(flags & IEEE80211_CHAN_PASSIVE_SCAN))) { + wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", + req->channels[i]->band, + req->channels[i]->center_freq); + wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", + req->channels[i]->hw_value, + req->channels[i]->flags); + wl1271_debug(DEBUG_SCAN, + "max_antenna_gain %d, max_power %d", + req->channels[i]->max_antenna_gain, + req->channels[i]->max_power); + wl1271_debug(DEBUG_SCAN, "beacon_found %d", + req->channels[i]->beacon_found); + + if (!passive) { + channels[j].min_duration = + cpu_to_le32(c->min_dwell_time_active); + channels[j].max_duration = + cpu_to_le32(c->max_dwell_time_active); + } else { + channels[j].min_duration = + cpu_to_le32(c->min_dwell_time_passive); + channels[j].max_duration = + cpu_to_le32(c->max_dwell_time_passive); + } + channels[j].early_termination = 0; + channels[j].tx_power_att = req->channels[i]->max_power; + channels[j].channel = req->channels[i]->hw_value; + + memset(&channels[j].bssid_lsb, 0xff, 4); + memset(&channels[j].bssid_msb, 0xff, 2); + + /* Mark the channels we already used */ + set_bit(i, wl->scan.scanned_ch); + + j++; + } + } + + return j; +} + +#define WL1271_NOTHING_TO_SCAN 1 + +static int wl1271_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, + enum ieee80211_band band, + bool passive, u32 basic_rate) +{ + struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); + struct wl1271_cmd_scan *cmd; + struct wl1271_cmd_trigger_scan_to *trigger; + int ret; + u16 scan_options = 0; + + /* skip active scans if we don't have SSIDs */ + if (!passive && wl->scan.req->n_ssids == 0) + return WL1271_NOTHING_TO_SCAN; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); + if (!cmd || !trigger) { + ret = -ENOMEM; + goto out; + } + + if (wl->conf.scan.split_scan_timeout) + scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN; + + if (passive) + scan_options |= WL1271_SCAN_OPT_PASSIVE; + + cmd->params.role_id = wlvif->role_id; + + if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->params.scan_options = cpu_to_le16(scan_options); + + cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, + cmd->channels, + band, passive); + if (cmd->params.n_ch == 0) { + ret = WL1271_NOTHING_TO_SCAN; + goto out; + } + + cmd->params.tx_rate = cpu_to_le32(basic_rate); + cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; + cmd->params.tid_trigger = CONF_TX_AC_ANY_TID; + cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; + + if (band == IEEE80211_BAND_2GHZ) + cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; + else + cmd->params.band = WL1271_SCAN_BAND_5_GHZ; + + if (wl->scan.ssid_len && wl->scan.ssid) { + cmd->params.ssid_len = wl->scan.ssid_len; + memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); + } + + memcpy(cmd->addr, vif->addr, ETH_ALEN); + + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->params.role_id, band, + wl->scan.ssid, wl->scan.ssid_len, + wl->scan.req->ie, + wl->scan.req->ie_len, false); + if (ret < 0) { + wl1271_error("PROBE request template failed"); + goto out; + } + + trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout); + ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, + sizeof(*trigger), 0); + if (ret < 0) { + wl1271_error("trigger scan to failed for hw scan"); + goto out; + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd); + kfree(trigger); + return ret; +} + +int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_header *cmd = NULL; + int ret = 0; + + if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) + return -EINVAL; + + wl1271_debug(DEBUG_CMD, "cmd scan stop"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, + sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("cmd stop_scan failed"); + goto out; + } +out: + kfree(cmd); + return ret; +} + +void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + int ret = 0; + enum ieee80211_band band; + u32 rate, mask; + + switch (wl->scan.state) { + case WL1271_SCAN_STATE_IDLE: + break; + + case WL1271_SCAN_STATE_2GHZ_ACTIVE: + band = IEEE80211_BAND_2GHZ; + mask = wlvif->bitrate_masks[band]; + if (wl->scan.req->no_cck) { + mask &= ~CONF_TX_CCK_RATES; + if (!mask) + mask = CONF_TX_RATE_MASK_BASIC_P2P; + } + rate = wl1271_tx_min_rate_get(wl, mask); + ret = wl1271_scan_send(wl, wlvif, band, false, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_2GHZ_PASSIVE: + band = IEEE80211_BAND_2GHZ; + mask = wlvif->bitrate_masks[band]; + if (wl->scan.req->no_cck) { + mask &= ~CONF_TX_CCK_RATES; + if (!mask) + mask = CONF_TX_RATE_MASK_BASIC_P2P; + } + rate = wl1271_tx_min_rate_get(wl, mask); + ret = wl1271_scan_send(wl, wlvif, band, true, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + if (wl->enable_11a) + wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; + else + wl->scan.state = WL1271_SCAN_STATE_DONE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_5GHZ_ACTIVE: + band = IEEE80211_BAND_5GHZ; + rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); + ret = wl1271_scan_send(wl, wlvif, band, false, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_5GHZ_PASSIVE: + band = IEEE80211_BAND_5GHZ; + rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); + ret = wl1271_scan_send(wl, wlvif, band, true, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_DONE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_DONE: + wl->scan.failed = false; + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); + break; + + default: + wl1271_error("invalid scan state"); + break; + } + + if (ret < 0) { + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); + } +} + +static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, + struct wlcore_scan_channels *cmd_channels) +{ + memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); + memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); + cmd->dfs = cmd_channels->dfs; + cmd->n_pactive_ch = cmd_channels->passive_active; + + memcpy(cmd->channels_2, cmd_channels->channels_2, + sizeof(cmd->channels_2)); + memcpy(cmd->channels_5, cmd_channels->channels_5, + sizeof(cmd->channels_2)); + /* channels_4 are not supported, so no need to copy them */ +} + +int wl1271_scan_sched_scan_config(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies) +{ + struct wl1271_cmd_sched_scan_config *cfg = NULL; + struct wlcore_scan_channels *cfg_channels = NULL; + struct conf_sched_scan_settings *c = &wl->conf.sched_scan; + int i, ret; + bool force_passive = !req->n_ssids; + + wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); + + cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + cfg->role_id = wlvif->role_id; + cfg->rssi_threshold = c->rssi_threshold; + cfg->snr_threshold = c->snr_threshold; + cfg->n_probe_reqs = c->num_probe_reqs; + /* cycles set to 0 it means infinite (until manually stopped) */ + cfg->cycles = 0; + /* report APs when at least 1 is found */ + cfg->report_after = 1; + /* don't stop scanning automatically when something is found */ + cfg->terminate = 0; + cfg->tag = WL1271_SCAN_DEFAULT_TAG; + /* don't filter on BSS type */ + cfg->bss_type = SCAN_BSS_TYPE_ANY; + /* currently NL80211 supports only a single interval */ + for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) + cfg->intervals[i] = cpu_to_le32(req->interval); + + cfg->ssid_len = 0; + ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); + if (ret < 0) + goto out; + + cfg->filter_type = ret; + + wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); + + cfg_channels = kzalloc(sizeof(*cfg_channels), GFP_KERNEL); + if (!cfg_channels) { + ret = -ENOMEM; + goto out; + } + + if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels, + req->n_channels, req->n_ssids)) { + wl1271_error("scan channel list is empty"); + ret = -EINVAL; + goto out; + } + wl12xx_adjust_channels(cfg, cfg_channels); + + if (!force_passive && cfg->active[0]) { + u8 band = IEEE80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + wlvif->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ie[band], + ies->len[band], true); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (!force_passive && cfg->active[1]) { + u8 band = IEEE80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + wlvif->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ie[band], + ies->len[band], true); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); + + ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, + sizeof(*cfg), 0); + if (ret < 0) { + wl1271_error("SCAN configuration failed"); + goto out; + } +out: + kfree(cfg_channels); + kfree(cfg); + return ret; +} + +int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_sched_scan_start *start; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); + + if (wlvif->bss_type != BSS_TYPE_STA_BSS) + return -EOPNOTSUPP; + + if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) && + test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) + return -EBUSY; + + start = kzalloc(sizeof(*start), GFP_KERNEL); + if (!start) + return -ENOMEM; + + start->role_id = wlvif->role_id; + start->tag = WL1271_SCAN_DEFAULT_TAG; + + ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, + sizeof(*start), 0); + if (ret < 0) { + wl1271_error("failed to send scan start command"); + goto out_free; + } + +out_free: + kfree(start); + return ret; +} + +int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies) +{ + int ret; + + ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies); + if (ret < 0) + return ret; + + return wl1271_scan_sched_scan_start(wl, wlvif); +} + +void wl12xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_sched_scan_stop *stop; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); + + /* FIXME: what to do if alloc'ing to stop fails? */ + stop = kzalloc(sizeof(*stop), GFP_KERNEL); + if (!stop) { + wl1271_error("failed to alloc memory to send sched scan stop"); + return; + } + + stop->role_id = wlvif->role_id; + stop->tag = WL1271_SCAN_DEFAULT_TAG; + + ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, + sizeof(*stop), 0); + if (ret < 0) { + wl1271_error("failed to send sched scan stop command"); + goto out_free; + } + +out_free: + kfree(stop); +} + +int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + wl1271_scan_stm(wl, wlvif); + return 0; +} + +void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + wl1271_scan_stm(wl, wlvif); +} diff --git a/drivers/net/wireless/ti/wl12xx/scan.h b/drivers/net/wireless/ti/wl12xx/scan.h new file mode 100644 index 000000000000..bd075dec5946 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/scan.h @@ -0,0 +1,138 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_SCAN_H__ +#define __WL12XX_SCAN_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/cmd.h" +#include "../wlcore/scan.h" + +struct basic_scan_params { + /* Scan option flags (WL1271_SCAN_OPT_*) */ + __le16 scan_options; + u8 role_id; + /* Number of scan channels in the list (maximum 30) */ + u8 n_ch; + /* This field indicates the number of probe requests to send + per channel for an active scan */ + u8 n_probe_reqs; + u8 tid_trigger; + u8 ssid_len; + u8 use_ssid_list; + + /* Rate bit field for sending the probes */ + __le32 tx_rate; + + u8 ssid[IEEE80211_MAX_SSID_LEN]; + /* Band to scan */ + u8 band; + + u8 scan_tag; + u8 padding2[2]; +} __packed; + +struct basic_scan_channel_params { + /* Duration in TU to wait for frames on a channel for active scan */ + __le32 min_duration; + __le32 max_duration; + __le32 bssid_lsb; + __le16 bssid_msb; + u8 early_termination; + u8 tx_power_att; + u8 channel; + /* FW internal use only! */ + u8 dfs_candidate; + u8 activity_detected; + u8 pad; +} __packed; + +struct wl1271_cmd_scan { + struct wl1271_cmd_header header; + + struct basic_scan_params params; + struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS]; + + /* src mac address */ + u8 addr[ETH_ALEN]; + u8 padding[2]; +} __packed; + +struct wl1271_cmd_sched_scan_config { + struct wl1271_cmd_header header; + + __le32 intervals[SCAN_MAX_CYCLE_INTERVALS]; + + s8 rssi_threshold; /* for filtering (in dBm) */ + s8 snr_threshold; /* for filtering (in dB) */ + + u8 cycles; /* maximum number of scan cycles */ + u8 report_after; /* report when this number of results are received */ + u8 terminate; /* stop scanning after reporting */ + + u8 tag; + u8 bss_type; /* for filtering */ + u8 filter_type; + + u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ + u8 ssid[IEEE80211_MAX_SSID_LEN]; + + u8 n_probe_reqs; /* Number of probes requests per channel */ + + u8 passive[SCAN_MAX_BANDS]; + u8 active[SCAN_MAX_BANDS]; + + u8 dfs; + + u8 n_pactive_ch; /* number of pactive (passive until fw detects energy) + channels in BG band */ + u8 role_id; + u8 padding[1]; + struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; + struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; +} __packed; + +struct wl1271_cmd_sched_scan_start { + struct wl1271_cmd_header header; + + u8 tag; + u8 role_id; + u8 padding[2]; +} __packed; + +struct wl1271_cmd_sched_scan_stop { + struct wl1271_cmd_header header; + + u8 tag; + u8 role_id; + u8 padding[2]; +} __packed; + +int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req); +int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies); +void wl12xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +#endif diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile index 67c098734c7f..f74224960c70 100644 --- a/drivers/net/wireless/ti/wl18xx/Makefile +++ b/drivers/net/wireless/ti/wl18xx/Makefile @@ -1,3 +1,3 @@ -wl18xx-objs = main.o acx.o tx.o io.o debugfs.o +wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o obj-$(CONFIG_WL18XX) += wl18xx.o diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 8ba1c9387a14..97c23c8dd5e9 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -38,6 +38,7 @@ #include "tx.h" #include "wl18xx.h" #include "io.h" +#include "scan.h" #include "debugfs.h" #define WL18XX_RX_CHECKSUM_MASK 0x40 @@ -612,7 +613,8 @@ static int wl18xx_identify_chip(struct wl1271 *wl) WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | - WLCORE_QUIRK_TX_PAD_LAST_FRAME; + WLCORE_QUIRK_TX_PAD_LAST_FRAME | + WLCORE_QUIRK_DUAL_PROBE_TMPL; wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, WL18XX_IFTYPE_VER, WL18XX_MAJOR_VER, WL18XX_SUBTYPE_VER, @@ -630,6 +632,10 @@ static int wl18xx_identify_chip(struct wl1271 *wl) goto out; } + wl->scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; + wl->scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; + wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC; + wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC; out: return ret; } @@ -1320,6 +1326,11 @@ static struct wlcore_ops wl18xx_ops = { .ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask, .get_mac = wl18xx_get_mac, .debugfs_init = wl18xx_debugfs_add_files, + .scan_start = wl18xx_scan_start, + .scan_stop = wl18xx_scan_stop, + .scan_completed = wl18xx_scan_completed, + .sched_scan_start = wl18xx_sched_scan_start, + .sched_scan_stop = wl18xx_scan_sched_scan_stop, .handle_static_data = wl18xx_handle_static_data, .get_spare_blocks = wl18xx_get_spare_blocks, .set_key = wl18xx_set_key, diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c new file mode 100644 index 000000000000..f31d0d480d1b --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -0,0 +1,320 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include "scan.h" +#include "../wlcore/debug.h" + +static void wl18xx_adjust_channels(struct wl18xx_cmd_scan_params *cmd, + struct wlcore_scan_channels *cmd_channels) +{ + memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); + memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); + cmd->dfs = cmd_channels->dfs; + cmd->passive_active = cmd_channels->passive_active; + + memcpy(cmd->channels_2, cmd_channels->channels_2, + sizeof(cmd->channels_2)); + memcpy(cmd->channels_5, cmd_channels->channels_5, + sizeof(cmd->channels_2)); + /* channels_4 are not supported, so no need to copy them */ +} + +static int wl18xx_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + struct wl18xx_cmd_scan_params *cmd; + struct wlcore_scan_channels *cmd_channels = NULL; + int ret; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + + if (WARN_ON(cmd->role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->scan_type = SCAN_TYPE_SEARCH; + cmd->rssi_threshold = -127; + cmd->snr_threshold = 0; + + cmd->bss_type = SCAN_BSS_TYPE_ANY; + + cmd->ssid_from_list = 0; + cmd->filter = 0; + cmd->add_broadcast = 0; + + cmd->urgency = 0; + cmd->protect = 0; + + cmd->n_probe_reqs = wl->conf.scan.num_probe_reqs; + cmd->terminate_after = 0; + + /* configure channels */ + WARN_ON(req->n_ssids > 1); + + cmd_channels = kzalloc(sizeof(*cmd_channels), GFP_KERNEL); + if (!cmd_channels) { + ret = -ENOMEM; + goto out; + } + + wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, + req->n_channels, req->n_ssids); + wl18xx_adjust_channels(cmd, cmd_channels); + + /* + * all the cycles params (except total cycles) should + * remain 0 for normal scan + */ + cmd->total_cycles = 1; + + if (req->no_cck) + cmd->rate = WL18XX_SCAN_RATE_6; + + cmd->tag = WL1271_SCAN_DEFAULT_TAG; + + if (req->n_ssids) { + cmd->ssid_len = req->ssids[0].ssid_len; + memcpy(cmd->ssid, req->ssids[0].ssid, cmd->ssid_len); + } + + /* TODO: per-band ies? */ + if (cmd->active[0]) { + u8 band = IEEE80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + req->ie, + req->ie_len, + false); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (cmd->active[1]) { + u8 band = IEEE80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + req->ie, + req->ie_len, + false); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd_channels); + kfree(cmd); + return ret; +} + +void wl18xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + wl->scan.failed = false; + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); +} + +static +int wl18xx_scan_sched_scan_config(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies) +{ + struct wl18xx_cmd_scan_params *cmd; + struct wlcore_scan_channels *cmd_channels = NULL; + struct conf_sched_scan_settings *c = &wl->conf.sched_scan; + int ret; + int filter_type; + + wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); + + filter_type = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); + if (filter_type < 0) + return filter_type; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + + if (WARN_ON(cmd->role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->scan_type = SCAN_TYPE_PERIODIC; + cmd->rssi_threshold = c->rssi_threshold; + cmd->snr_threshold = c->snr_threshold; + + /* don't filter on BSS type */ + cmd->bss_type = SCAN_BSS_TYPE_ANY; + + cmd->ssid_from_list = 1; + if (filter_type == SCAN_SSID_FILTER_LIST) + cmd->filter = 1; + cmd->add_broadcast = 0; + + cmd->urgency = 0; + cmd->protect = 0; + + cmd->n_probe_reqs = c->num_probe_reqs; + /* don't stop scanning automatically when something is found */ + cmd->terminate_after = 0; + + cmd_channels = kzalloc(sizeof(*cmd_channels), GFP_KERNEL); + if (!cmd_channels) { + ret = -ENOMEM; + goto out; + } + + /* configure channels */ + wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, + req->n_channels, req->n_ssids); + wl18xx_adjust_channels(cmd, cmd_channels); + + cmd->short_cycles_sec = 0; + cmd->long_cycles_sec = cpu_to_le16(req->interval); + cmd->short_cycles_count = 0; + + cmd->total_cycles = 0; + + cmd->tag = WL1271_SCAN_DEFAULT_TAG; + + if (cmd->active[0]) { + u8 band = IEEE80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ie[band], + ies->len[band], + true); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (cmd->active[1]) { + u8 band = IEEE80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ie[band], + ies->len[band], + true); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd_channels); + kfree(cmd); + return ret; +} + +int wl18xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies) +{ + return wl18xx_scan_sched_scan_config(wl, wlvif, req, ies); +} + +static int __wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 scan_type) +{ + struct wl18xx_cmd_scan_stop *stop; + int ret; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); + + stop = kzalloc(sizeof(*stop), GFP_KERNEL); + if (!stop) { + wl1271_error("failed to alloc memory to send sched scan stop"); + return -ENOMEM; + } + + stop->role_id = wlvif->role_id; + stop->scan_type = scan_type; + + ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, stop, sizeof(*stop), 0); + if (ret < 0) { + wl1271_error("failed to send sched scan stop command"); + goto out_free; + } + +out_free: + kfree(stop); + return ret; +} + +void wl18xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + __wl18xx_scan_stop(wl, wlvif, SCAN_TYPE_PERIODIC); +} +int wl18xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + return wl18xx_scan_send(wl, wlvif, req); +} + +int wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + return __wl18xx_scan_stop(wl, wlvif, SCAN_TYPE_SEARCH); +} diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h new file mode 100644 index 000000000000..404baf17aa28 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -0,0 +1,120 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL18XX_SCAN_H__ +#define __WL18XX_SCAN_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/cmd.h" +#include "../wlcore/scan.h" + +struct tracking_ch_params { + struct conn_scan_ch_params channel; + + __le32 bssid_lsb; + __le16 bssid_msb; + + u8 padding[2]; +} __packed; + +enum +{ + SCAN_TYPE_SEARCH = 0, + SCAN_TYPE_PERIODIC = 1, + SCAN_TYPE_TRACKING = 2, +}; + +/* probe request rate */ +enum +{ + WL18XX_SCAN_RATE_1 = 0, + WL18XX_SCAN_RATE_5_5 = 1, + WL18XX_SCAN_RATE_6 = 2, +}; + +struct wl18xx_cmd_scan_params { + struct wl1271_cmd_header header; + + u8 role_id; + u8 scan_type; + + s8 rssi_threshold; /* for filtering (in dBm) */ + s8 snr_threshold; /* for filtering (in dB) */ + + u8 bss_type; /* for filtering */ + u8 ssid_from_list; /* use ssid from configured ssid list */ + u8 filter; /* forward only results with matching ssids */ + + /* + * add broadcast ssid in addition to the configured ssids. + * the driver should add dummy entry for it (?). + */ + u8 add_broadcast; + + u8 urgency; + u8 protect; /* ??? */ + u8 n_probe_reqs; /* Number of probes requests per channel */ + u8 terminate_after; /* early terminate scan operation */ + + u8 passive[SCAN_MAX_BANDS]; /* number of passive scan channels */ + u8 active[SCAN_MAX_BANDS]; /* number of active scan channels */ + u8 dfs; /* number of dfs channels in 5ghz */ + u8 passive_active; /* number of passive before active channels 2.4ghz */ + + __le16 short_cycles_sec; + __le16 long_cycles_sec; + u8 short_cycles_count; + u8 total_cycles; /* 0 - infinite */ + u8 rate; + u8 padding[1]; + + union { + struct { + struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; + struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; + }; + struct tracking_ch_params channels_tracking[WL1271_SCAN_MAX_CHANNELS]; + } ; + + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ + u8 tag; + u8 padding1[2]; +} __packed; + +struct wl18xx_cmd_scan_stop { + struct wl1271_cmd_header header; + + u8 role_id; + u8 scan_type; + u8 padding[2]; +} __packed; + +int wl18xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req); +int wl18xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +void wl18xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl18xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies); +void wl18xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +#endif diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 04ba86d2d875..c8c776684d2c 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -131,6 +131,7 @@ fail: wl12xx_queue_recovery_work(wl); return ret; } +EXPORT_SYMBOL_GPL(wl1271_cmd_send); /* * Poll the mailbox event field until any of the bits in the mask is set or a @@ -1049,8 +1050,8 @@ int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct sk_buff *skb; int ret; u32 rate; - u16 template_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; - u16 template_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; + u16 template_id_2_4 = wl->scan_templ_id_2_4; + u16 template_id_5 = wl->scan_templ_id_5; skb = ieee80211_probereq_get(wl->hw, vif, ssid, ssid_len, ie, ie_len); @@ -1061,10 +1062,10 @@ int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len); - if (!sched_scan && + if (sched_scan && (wl->quirks & WLCORE_QUIRK_DUAL_PROBE_TMPL)) { - template_id_2_4 = CMD_TEMPL_APP_PROBE_REQ_2_4; - template_id_5 = CMD_TEMPL_APP_PROBE_REQ_5; + template_id_2_4 = wl->sched_scan_templ_id_2_4; + template_id_5 = wl->sched_scan_templ_id_5; } rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); @@ -1081,6 +1082,7 @@ out: dev_kfree_skb(skb); return ret; } +EXPORT_SYMBOL_GPL(wl12xx_cmd_build_probe_req); struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index d021305c1ff9..9e9062fdb712 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -172,8 +172,8 @@ enum cmd_templ { CMD_TEMPL_PS_POLL, CMD_TEMPL_KLV, CMD_TEMPL_DISCONNECT, - CMD_TEMPL_APP_PROBE_REQ_2_4, - CMD_TEMPL_APP_PROBE_REQ_5, + CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY, + CMD_TEMPL_APP_PROBE_REQ_5_LEGACY, CMD_TEMPL_BAR, /* for firmware internal use only */ CMD_TEMPL_CTS, /* * For CTS-to-self (FastCTS) mechanism @@ -184,6 +184,8 @@ enum cmd_templ { CMD_TEMPL_DEAUTH_AP, CMD_TEMPL_TEMPORARY, CMD_TEMPL_LINK_MEASUREMENT_REPORT, + CMD_TEMPL_PROBE_REQ_2_4_PERIODIC, + CMD_TEMPL_PROBE_REQ_5_PERIODIC, CMD_TEMPL_MAX = 0xff }; diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index cf45aaf33bc8..d9353dad08d9 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -117,7 +117,9 @@ static int wl1271_event_process(struct wl1271 *wl) wl1271_debug(DEBUG_EVENT, "status: 0x%x", mbox->scheduled_scan_status); - wl1271_scan_stm(wl, wl->scan_vif); + if (wl->scan_vif) + wl->ops->scan_completed(wl, + wl12xx_vif_to_data(wl->scan_vif)); } if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index 84641b3c1b80..06e1bf98f44e 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -41,14 +41,14 @@ int wl1271_init_templates_config(struct wl1271 *wl) /* send empty templates for fw memory reservation */ ret = wl1271_cmd_template_set(wl, WL12XX_INVALID_ROLE_ID, - CMD_TEMPL_CFG_PROBE_REQ_2_4, NULL, + wl->scan_templ_id_2_4, NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0, WL1271_RATE_AUTOMATIC); if (ret < 0) return ret; ret = wl1271_cmd_template_set(wl, WL12XX_INVALID_ROLE_ID, - CMD_TEMPL_CFG_PROBE_REQ_5, + wl->scan_templ_id_5, NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0, WL1271_RATE_AUTOMATIC); if (ret < 0) @@ -56,14 +56,16 @@ int wl1271_init_templates_config(struct wl1271 *wl) if (wl->quirks & WLCORE_QUIRK_DUAL_PROBE_TMPL) { ret = wl1271_cmd_template_set(wl, WL12XX_INVALID_ROLE_ID, - CMD_TEMPL_APP_PROBE_REQ_2_4, NULL, + wl->sched_scan_templ_id_2_4, + NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0, WL1271_RATE_AUTOMATIC); if (ret < 0) return ret; ret = wl1271_cmd_template_set(wl, WL12XX_INVALID_ROLE_ID, - CMD_TEMPL_APP_PROBE_REQ_5, NULL, + wl->sched_scan_templ_id_5, + NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0, WL1271_RATE_AUTOMATIC); if (ret < 0) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 111b84fcf66e..0f7a9338d10b 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -3252,7 +3252,7 @@ static int wl1271_op_hw_scan(struct ieee80211_hw *hw, goto out_sleep; } - ret = wl1271_scan(hw->priv, vif, ssid, len, req); + ret = wlcore_scan(hw->priv, vif, ssid, len, req); out_sleep: wl1271_ps_elp_sleep(wl); out: @@ -3265,6 +3265,7 @@ static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct wl1271 *wl = hw->priv; + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); int ret; wl1271_debug(DEBUG_MAC80211, "mac80211 cancel hw scan"); @@ -3282,7 +3283,7 @@ static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, goto out; if (wl->scan.state != WL1271_SCAN_STATE_DONE) { - ret = wl1271_scan_stop(wl); + ret = wl->ops->scan_stop(wl, wlvif); if (ret < 0) goto out_sleep; } @@ -3329,11 +3330,7 @@ static int wl1271_op_sched_scan_start(struct ieee80211_hw *hw, if (ret < 0) goto out; - ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies); - if (ret < 0) - goto out_sleep; - - ret = wl1271_scan_sched_scan_start(wl, wlvif); + ret = wl->ops->sched_scan_start(wl, wlvif, req, ies); if (ret < 0) goto out_sleep; @@ -3364,7 +3361,7 @@ static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw, if (ret < 0) goto out; - wl1271_scan_sched_scan_stop(wl, wlvif); + wl->ops->sched_scan_stop(wl, wlvif); wl1271_ps_elp_sleep(wl); out: @@ -3821,7 +3818,7 @@ static int wlcore_set_bssid(struct wl1271 *wl, struct wl12xx_vif *wlvif, /* we only support sched_scan while not connected */ if (wl->sched_scanning) - wl1271_scan_sched_scan_stop(wl, wlvif); + wl->ops->sched_scan_stop(wl, wlvif); ret = wl1271_acx_sta_rate_policies(wl, wlvif); if (ret < 0) diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 22dd7e94f40f..9eab64d1679b 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -89,319 +89,6 @@ out: } - -static int wl1271_get_scan_channels(struct wl1271 *wl, - struct cfg80211_scan_request *req, - struct basic_scan_channel_params *channels, - enum ieee80211_band band, bool passive) -{ - struct conf_scan_settings *c = &wl->conf.scan; - int i, j; - u32 flags; - - for (i = 0, j = 0; - i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; - i++) { - flags = req->channels[i]->flags; - - if (!test_bit(i, wl->scan.scanned_ch) && - !(flags & IEEE80211_CHAN_DISABLED) && - (req->channels[i]->band == band) && - /* - * In passive scans, we scan all remaining - * channels, even if not marked as such. - * In active scans, we only scan channels not - * marked as passive. - */ - (passive || !(flags & IEEE80211_CHAN_PASSIVE_SCAN))) { - wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", - req->channels[i]->band, - req->channels[i]->center_freq); - wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", - req->channels[i]->hw_value, - req->channels[i]->flags); - wl1271_debug(DEBUG_SCAN, - "max_antenna_gain %d, max_power %d", - req->channels[i]->max_antenna_gain, - req->channels[i]->max_power); - wl1271_debug(DEBUG_SCAN, "beacon_found %d", - req->channels[i]->beacon_found); - - if (!passive) { - channels[j].min_duration = - cpu_to_le32(c->min_dwell_time_active); - channels[j].max_duration = - cpu_to_le32(c->max_dwell_time_active); - } else { - channels[j].min_duration = - cpu_to_le32(c->min_dwell_time_passive); - channels[j].max_duration = - cpu_to_le32(c->max_dwell_time_passive); - } - channels[j].early_termination = 0; - channels[j].tx_power_att = req->channels[i]->max_power; - channels[j].channel = req->channels[i]->hw_value; - - memset(&channels[j].bssid_lsb, 0xff, 4); - memset(&channels[j].bssid_msb, 0xff, 2); - - /* Mark the channels we already used */ - set_bit(i, wl->scan.scanned_ch); - - j++; - } - } - - return j; -} - -#define WL1271_NOTHING_TO_SCAN 1 - -static int wl1271_scan_send(struct wl1271 *wl, struct ieee80211_vif *vif, - enum ieee80211_band band, - bool passive, u32 basic_rate) -{ - struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); - struct wl1271_cmd_scan *cmd; - struct wl1271_cmd_trigger_scan_to *trigger; - int ret; - u16 scan_options = 0; - - /* skip active scans if we don't have SSIDs */ - if (!passive && wl->scan.req->n_ssids == 0) - return WL1271_NOTHING_TO_SCAN; - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); - if (!cmd || !trigger) { - ret = -ENOMEM; - goto out; - } - - if (wl->conf.scan.split_scan_timeout) - scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN; - - if (passive) - scan_options |= WL1271_SCAN_OPT_PASSIVE; - - cmd->params.role_id = wlvif->role_id; - - if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) { - ret = -EINVAL; - goto out; - } - - cmd->params.scan_options = cpu_to_le16(scan_options); - - cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, - cmd->channels, - band, passive); - if (cmd->params.n_ch == 0) { - ret = WL1271_NOTHING_TO_SCAN; - goto out; - } - - cmd->params.tx_rate = cpu_to_le32(basic_rate); - cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; - cmd->params.tid_trigger = CONF_TX_AC_ANY_TID; - cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; - - if (band == IEEE80211_BAND_2GHZ) - cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; - else - cmd->params.band = WL1271_SCAN_BAND_5_GHZ; - - if (wl->scan.ssid_len && wl->scan.ssid) { - cmd->params.ssid_len = wl->scan.ssid_len; - memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); - } - - memcpy(cmd->addr, vif->addr, ETH_ALEN); - - ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->params.role_id, band, - wl->scan.ssid, wl->scan.ssid_len, - wl->scan.req->ie, - wl->scan.req->ie_len, false); - if (ret < 0) { - wl1271_error("PROBE request template failed"); - goto out; - } - - trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout); - ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, - sizeof(*trigger), 0); - if (ret < 0) { - wl1271_error("trigger scan to failed for hw scan"); - goto out; - } - - wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); - - ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("SCAN failed"); - goto out; - } - -out: - kfree(cmd); - kfree(trigger); - return ret; -} - -void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif) -{ - struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); - int ret = 0; - enum ieee80211_band band; - u32 rate, mask; - - switch (wl->scan.state) { - case WL1271_SCAN_STATE_IDLE: - break; - - case WL1271_SCAN_STATE_2GHZ_ACTIVE: - band = IEEE80211_BAND_2GHZ; - mask = wlvif->bitrate_masks[band]; - if (wl->scan.req->no_cck) { - mask &= ~CONF_TX_CCK_RATES; - if (!mask) - mask = CONF_TX_RATE_MASK_BASIC_P2P; - } - rate = wl1271_tx_min_rate_get(wl, mask); - ret = wl1271_scan_send(wl, vif, band, false, rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; - wl1271_scan_stm(wl, vif); - } - - break; - - case WL1271_SCAN_STATE_2GHZ_PASSIVE: - band = IEEE80211_BAND_2GHZ; - mask = wlvif->bitrate_masks[band]; - if (wl->scan.req->no_cck) { - mask &= ~CONF_TX_CCK_RATES; - if (!mask) - mask = CONF_TX_RATE_MASK_BASIC_P2P; - } - rate = wl1271_tx_min_rate_get(wl, mask); - ret = wl1271_scan_send(wl, vif, band, true, rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - if (wl->enable_11a) - wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; - else - wl->scan.state = WL1271_SCAN_STATE_DONE; - wl1271_scan_stm(wl, vif); - } - - break; - - case WL1271_SCAN_STATE_5GHZ_ACTIVE: - band = IEEE80211_BAND_5GHZ; - rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); - ret = wl1271_scan_send(wl, vif, band, false, rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; - wl1271_scan_stm(wl, vif); - } - - break; - - case WL1271_SCAN_STATE_5GHZ_PASSIVE: - band = IEEE80211_BAND_5GHZ; - rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); - ret = wl1271_scan_send(wl, vif, band, true, rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_DONE; - wl1271_scan_stm(wl, vif); - } - - break; - - case WL1271_SCAN_STATE_DONE: - wl->scan.failed = false; - cancel_delayed_work(&wl->scan_complete_work); - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(0)); - break; - - default: - wl1271_error("invalid scan state"); - break; - } - - if (ret < 0) { - cancel_delayed_work(&wl->scan_complete_work); - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(0)); - } -} - -int wl1271_scan(struct wl1271 *wl, struct ieee80211_vif *vif, - const u8 *ssid, size_t ssid_len, - struct cfg80211_scan_request *req) -{ - /* - * cfg80211 should guarantee that we don't get more channels - * than what we have registered. - */ - BUG_ON(req->n_channels > WL1271_MAX_CHANNELS); - - if (wl->scan.state != WL1271_SCAN_STATE_IDLE) - return -EBUSY; - - wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE; - - if (ssid_len && ssid) { - wl->scan.ssid_len = ssid_len; - memcpy(wl->scan.ssid, ssid, ssid_len); - } else { - wl->scan.ssid_len = 0; - } - - wl->scan_vif = vif; - wl->scan.req = req; - memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); - - /* we assume failure so that timeout scenarios are handled correctly */ - wl->scan.failed = true; - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(WL1271_SCAN_TIMEOUT)); - - wl1271_scan_stm(wl, vif); - - return 0; -} - -int wl1271_scan_stop(struct wl1271 *wl) -{ - struct wl1271_cmd_header *cmd = NULL; - int ret = 0; - - if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) - return -EINVAL; - - wl1271_debug(DEBUG_CMD, "cmd scan stop"); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, - sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("cmd stop_scan failed"); - goto out; - } -out: - kfree(cmd); - return ret; -} - static int wlcore_scan_get_channels(struct wl1271 *wl, struct ieee80211_channel *req_channels[], @@ -503,9 +190,9 @@ wlcore_scan_get_channels(struct wl1271 *wl, return j - start; } -static bool +bool wlcore_set_scan_chan_params(struct wl1271 *wl, - struct wl1271_cmd_sched_scan_config *cfg, + struct wlcore_scan_channels *cfg, struct ieee80211_channel *channels[], u32 n_channels, u32 n_ssids) @@ -570,7 +257,7 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, cfg->passive[2] = 0; cfg->active[2] = 0; - cfg->n_pactive_ch = n_pactive_ch; + cfg->passive_active = n_pactive_ch; wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d", cfg->active[0], cfg->passive[0]); @@ -582,10 +269,48 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, cfg->passive[1] || cfg->active[1] || cfg->dfs || cfg->passive[2] || cfg->active[2]; } +EXPORT_SYMBOL_GPL(wlcore_set_scan_chan_params); +int wlcore_scan(struct wl1271 *wl, struct ieee80211_vif *vif, + const u8 *ssid, size_t ssid_len, + struct cfg80211_scan_request *req) +{ + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + + /* + * cfg80211 should guarantee that we don't get more channels + * than what we have registered. + */ + BUG_ON(req->n_channels > WL1271_MAX_CHANNELS); + + if (wl->scan.state != WL1271_SCAN_STATE_IDLE) + return -EBUSY; + + wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE; + + if (ssid_len && ssid) { + wl->scan.ssid_len = ssid_len; + memcpy(wl->scan.ssid, ssid, ssid_len); + } else { + wl->scan.ssid_len = 0; + } + + wl->scan_vif = vif; + wl->scan.req = req; + memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); + + /* we assume failure so that timeout scenarios are handled correctly */ + wl->scan.failed = true; + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(WL1271_SCAN_TIMEOUT)); + + wl->ops->scan_start(wl, wlvif, req); + + return 0; +} /* Returns the scan type to be used or a negative value on error */ -static int -wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl, +int +wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct cfg80211_sched_scan_request *req) { @@ -688,129 +413,7 @@ out: return ret; return type; } - -int wl1271_scan_sched_scan_config(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - struct cfg80211_sched_scan_request *req, - struct ieee80211_sched_scan_ies *ies) -{ - struct wl1271_cmd_sched_scan_config *cfg = NULL; - struct conf_sched_scan_settings *c = &wl->conf.sched_scan; - int i, ret; - bool force_passive = !req->n_ssids; - - wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); - - cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); - if (!cfg) - return -ENOMEM; - - cfg->role_id = wlvif->role_id; - cfg->rssi_threshold = c->rssi_threshold; - cfg->snr_threshold = c->snr_threshold; - cfg->n_probe_reqs = c->num_probe_reqs; - /* cycles set to 0 it means infinite (until manually stopped) */ - cfg->cycles = 0; - /* report APs when at least 1 is found */ - cfg->report_after = 1; - /* don't stop scanning automatically when something is found */ - cfg->terminate = 0; - cfg->tag = WL1271_SCAN_DEFAULT_TAG; - /* don't filter on BSS type */ - cfg->bss_type = SCAN_BSS_TYPE_ANY; - /* currently NL80211 supports only a single interval */ - for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) - cfg->intervals[i] = cpu_to_le32(req->interval); - - cfg->ssid_len = 0; - ret = wl12xx_scan_sched_scan_ssid_list(wl, wlvif, req); - if (ret < 0) - goto out; - - cfg->filter_type = ret; - - wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); - - if (!wlcore_set_scan_chan_params(wl, cfg, req->channels, - req->n_channels, req->n_ssids)) { - wl1271_error("scan channel list is empty"); - ret = -EINVAL; - goto out; - } - - if (!force_passive && cfg->active[0]) { - u8 band = IEEE80211_BAND_2GHZ; - ret = wl12xx_cmd_build_probe_req(wl, wlvif, - wlvif->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - ies->ie[band], - ies->len[band], true); - if (ret < 0) { - wl1271_error("2.4GHz PROBE request template failed"); - goto out; - } - } - - if (!force_passive && cfg->active[1]) { - u8 band = IEEE80211_BAND_5GHZ; - ret = wl12xx_cmd_build_probe_req(wl, wlvif, - wlvif->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - ies->ie[band], - ies->len[band], true); - if (ret < 0) { - wl1271_error("5GHz PROBE request template failed"); - goto out; - } - } - - wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); - - ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, - sizeof(*cfg), 0); - if (ret < 0) { - wl1271_error("SCAN configuration failed"); - goto out; - } -out: - kfree(cfg); - return ret; -} - -int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) -{ - struct wl1271_cmd_sched_scan_start *start; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); - - if (wlvif->bss_type != BSS_TYPE_STA_BSS) - return -EOPNOTSUPP; - - if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) && - test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) - return -EBUSY; - - start = kzalloc(sizeof(*start), GFP_KERNEL); - if (!start) - return -ENOMEM; - - start->role_id = wlvif->role_id; - start->tag = WL1271_SCAN_DEFAULT_TAG; - - ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, - sizeof(*start), 0); - if (ret < 0) { - wl1271_error("failed to send scan start command"); - goto out_free; - } - -out_free: - kfree(start); - return ret; -} +EXPORT_SYMBOL_GPL(wlcore_scan_sched_scan_ssid_list); void wl1271_scan_sched_scan_results(struct wl1271 *wl) { @@ -818,31 +421,3 @@ void wl1271_scan_sched_scan_results(struct wl1271 *wl) ieee80211_sched_scan_results(wl->hw); } - -void wl1271_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) -{ - struct wl1271_cmd_sched_scan_stop *stop; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); - - /* FIXME: what to do if alloc'ing to stop fails? */ - stop = kzalloc(sizeof(*stop), GFP_KERNEL); - if (!stop) { - wl1271_error("failed to alloc memory to send sched scan stop"); - return; - } - - stop->role_id = wlvif->role_id; - stop->tag = WL1271_SCAN_DEFAULT_TAG; - - ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, - sizeof(*stop), 0); - if (ret < 0) { - wl1271_error("failed to send sched scan stop command"); - goto out_free; - } - -out_free: - kfree(stop); -} diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 29f3c8d6b046..25b0422ec989 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -26,21 +26,19 @@ #include "wlcore.h" -int wl1271_scan(struct wl1271 *wl, struct ieee80211_vif *vif, +int wlcore_scan(struct wl1271 *wl, struct ieee80211_vif *vif, const u8 *ssid, size_t ssid_len, struct cfg80211_scan_request *req); -int wl1271_scan_stop(struct wl1271 *wl); int wl1271_scan_build_probe_req(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, u8 band); -void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif); +void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif); void wl1271_scan_complete_work(struct work_struct *work); int wl1271_scan_sched_scan_config(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct cfg80211_sched_scan_request *req, struct ieee80211_sched_scan_ies *ies); int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif); -void wl1271_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); void wl1271_scan_sched_scan_results(struct wl1271 *wl); #define WL1271_SCAN_MAX_CHANNELS 24 @@ -66,56 +64,6 @@ enum { WL1271_SCAN_STATE_DONE }; -struct basic_scan_params { - /* Scan option flags (WL1271_SCAN_OPT_*) */ - __le16 scan_options; - u8 role_id; - /* Number of scan channels in the list (maximum 30) */ - u8 n_ch; - /* This field indicates the number of probe requests to send - per channel for an active scan */ - u8 n_probe_reqs; - u8 tid_trigger; - u8 ssid_len; - u8 use_ssid_list; - - /* Rate bit field for sending the probes */ - __le32 tx_rate; - - u8 ssid[IEEE80211_MAX_SSID_LEN]; - /* Band to scan */ - u8 band; - - u8 scan_tag; - u8 padding2[2]; -} __packed; - -struct basic_scan_channel_params { - /* Duration in TU to wait for frames on a channel for active scan */ - __le32 min_duration; - __le32 max_duration; - __le32 bssid_lsb; - __le16 bssid_msb; - u8 early_termination; - u8 tx_power_att; - u8 channel; - /* FW internal use only! */ - u8 dfs_candidate; - u8 activity_detected; - u8 pad; -} __packed; - -struct wl1271_cmd_scan { - struct wl1271_cmd_header header; - - struct basic_scan_params params; - struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS]; - - /* src mac address */ - u8 addr[ETH_ALEN]; - u8 padding[2]; -} __packed; - struct wl1271_cmd_trigger_scan_to { struct wl1271_cmd_header header; @@ -160,43 +108,6 @@ struct conn_scan_ch_params { u8 padding[3]; } __packed; -struct wl1271_cmd_sched_scan_config { - struct wl1271_cmd_header header; - - __le32 intervals[SCAN_MAX_CYCLE_INTERVALS]; - - s8 rssi_threshold; /* for filtering (in dBm) */ - s8 snr_threshold; /* for filtering (in dB) */ - - u8 cycles; /* maximum number of scan cycles */ - u8 report_after; /* report when this number of results are received */ - u8 terminate; /* stop scanning after reporting */ - - u8 tag; - u8 bss_type; /* for filtering */ - u8 filter_type; - - u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ - u8 ssid[IEEE80211_MAX_SSID_LEN]; - - u8 n_probe_reqs; /* Number of probes requests per channel */ - - u8 passive[SCAN_MAX_BANDS]; - u8 active[SCAN_MAX_BANDS]; - - u8 dfs; - - u8 n_pactive_ch; /* number of pactive (passive until fw detects energy) - channels in BG band */ - u8 role_id; - u8 padding[1]; - - struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; - struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; - struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; -} __packed; - - #define SCHED_SCAN_MAX_SSIDS 16 enum { @@ -220,21 +131,27 @@ struct wl1271_cmd_sched_scan_ssid_list { u8 padding[2]; } __packed; -struct wl1271_cmd_sched_scan_start { - struct wl1271_cmd_header header; +struct wlcore_scan_channels { + u8 passive[SCAN_MAX_BANDS]; /* number of passive scan channels */ + u8 active[SCAN_MAX_BANDS]; /* number of active scan channels */ + u8 dfs; /* number of dfs channels in 5ghz */ + u8 passive_active; /* number of passive before active channels 2.4ghz */ - u8 tag; - u8 role_id; - u8 padding[2]; -} __packed; - -struct wl1271_cmd_sched_scan_stop { - struct wl1271_cmd_header header; - - u8 tag; - u8 role_id; - u8 padding[2]; -} __packed; + struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; + struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; +}; +bool +wlcore_set_scan_chan_params(struct wl1271 *wl, + struct wlcore_scan_channels *cfg, + struct ieee80211_channel *channels[], + u32 n_channels, + u32 n_ssids); + +int +wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req); #endif /* __WL1271_SCAN_H__ */ diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index cf6dbee309a4..2844f305a489 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -1135,6 +1135,7 @@ u32 wl1271_tx_min_rate_get(struct wl1271 *wl, u32 rate_set) return BIT(__ffs(rate_set)); } +EXPORT_SYMBOL_GPL(wl1271_tx_min_rate_get); void wlcore_stop_queue_locked(struct wl1271 *wl, u8 queue, enum wlcore_queue_stop_reason reason) diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index b636f1db562b..9f82ee3a4a3a 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -82,6 +82,14 @@ struct wlcore_ops { int (*debugfs_init)(struct wl1271 *wl, struct dentry *rootdir); int (*handle_static_data)(struct wl1271 *wl, struct wl1271_static_data *static_data); + int (*scan_start)(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req); + int (*scan_stop)(struct wl1271 *wl, struct wl12xx_vif *wlvif); + void (*scan_completed)(struct wl1271 *wl, struct wl12xx_vif *wlvif); + int (*sched_scan_start)(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies); + void (*sched_scan_stop)(struct wl1271 *wl, struct wl12xx_vif *wlvif); int (*get_spare_blocks)(struct wl1271 *wl, bool is_gem); int (*set_key)(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_vif *vif, @@ -370,6 +378,11 @@ struct wl1271 { const char *sr_fw_name; const char *mr_fw_name; + u8 scan_templ_id_2_4; + u8 scan_templ_id_5; + u8 sched_scan_templ_id_2_4; + u8 sched_scan_templ_id_5; + /* per-chip-family private structure */ void *priv; -- cgit v1.2.3 From 0a1c720c63be74bbfe416fa085d0783348e4d69b Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:16 +0200 Subject: wl18xx: increase MAX_CHANNELS_5GHZ Some regdomains have more than 23 valid 5ghz channels, so 18xx's MAX_CHANNELS_5GHZ was increased to 32. Since now we have different max 5ghz channels values for wl12xx and wl18xx, add a new wl->max_channels_5ghz field, and use it for scan channels configuration. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 1 + drivers/net/wireless/ti/wl12xx/scan.h | 4 +++- drivers/net/wireless/ti/wl18xx/main.c | 1 + drivers/net/wireless/ti/wl18xx/scan.h | 4 +++- drivers/net/wireless/ti/wlcore/scan.c | 6 +++--- drivers/net/wireless/ti/wlcore/scan.h | 10 +++++++++- drivers/net/wireless/ti/wlcore/wlcore.h | 1 + 7 files changed, 21 insertions(+), 6 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index ada7031777cc..0c81eeb4f5b8 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -704,6 +704,7 @@ static int wl12xx_identify_chip(struct wl1271 *wl) wl->scan_templ_id_5 = CMD_TEMPL_APP_PROBE_REQ_5_LEGACY; wl->sched_scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; wl->sched_scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; + wl->max_channels_5 = WL12XX_MAX_CHANNELS_5GHZ; out: return ret; } diff --git a/drivers/net/wireless/ti/wl12xx/scan.h b/drivers/net/wireless/ti/wl12xx/scan.h index bd075dec5946..264af7ac2785 100644 --- a/drivers/net/wireless/ti/wl12xx/scan.h +++ b/drivers/net/wireless/ti/wl12xx/scan.h @@ -26,6 +26,8 @@ #include "../wlcore/cmd.h" #include "../wlcore/scan.h" +#define WL12XX_MAX_CHANNELS_5GHZ 23 + struct basic_scan_params { /* Scan option flags (WL1271_SCAN_OPT_*) */ __le16 scan_options; @@ -107,7 +109,7 @@ struct wl1271_cmd_sched_scan_config { u8 role_id; u8 padding[1]; struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; - struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_5[WL12XX_MAX_CHANNELS_5GHZ]; struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; } __packed; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 97c23c8dd5e9..e81b3518d288 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -636,6 +636,7 @@ static int wl18xx_identify_chip(struct wl1271 *wl) wl->scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC; wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC; + wl->max_channels_5 = WL18XX_MAX_CHANNELS_5GHZ; out: return ret; } diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h index 404baf17aa28..0e026ecb311e 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.h +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -50,6 +50,8 @@ enum WL18XX_SCAN_RATE_6 = 2, }; +#define WL18XX_MAX_CHANNELS_5GHZ 32 + struct wl18xx_cmd_scan_params { struct wl1271_cmd_header header; @@ -89,7 +91,7 @@ struct wl18xx_cmd_scan_params { union { struct { struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; - struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_5[WL18XX_MAX_CHANNELS_5GHZ]; struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; }; struct tracking_ch_params channels_tracking[WL1271_SCAN_MAX_CHANNELS]; diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 9eab64d1679b..e7d0a02be5b0 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -228,7 +228,7 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, cfg->channels_5, IEEE80211_BAND_5GHZ, false, true, 0, - MAX_CHANNELS_5GHZ, + wl->max_channels_5, &n_pactive_ch); cfg->dfs = wlcore_scan_get_channels(wl, @@ -239,7 +239,7 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, IEEE80211_BAND_5GHZ, true, true, cfg->passive[1], - MAX_CHANNELS_5GHZ, + wl->max_channels_5, &n_pactive_ch); cfg->active[1] = wlcore_scan_get_channels(wl, @@ -250,7 +250,7 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, IEEE80211_BAND_5GHZ, false, false, cfg->passive[1] + cfg->dfs, - MAX_CHANNELS_5GHZ, + wl->max_channels_5, &n_pactive_ch); /* 802.11j channels are not supported yet */ diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 25b0422ec989..8465f35c6a06 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -71,9 +71,17 @@ struct wl1271_cmd_trigger_scan_to { } __packed; #define MAX_CHANNELS_2GHZ 14 -#define MAX_CHANNELS_5GHZ 23 #define MAX_CHANNELS_4GHZ 4 +/* + * This max value here is used only for the struct definition of + * wlcore_scan_channels. This struct is used by both 12xx + * and 18xx (which have different max 5ghz channels value). + * In order to make sure this is large enough, just use the + * max possible 5ghz channels. + */ +#define MAX_CHANNELS_5GHZ 42 + #define SCAN_MAX_CYCLE_INTERVALS 16 #define SCAN_MAX_BANDS 3 diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 9f82ee3a4a3a..36fde4e01969 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -382,6 +382,7 @@ struct wl1271 { u8 scan_templ_id_5; u8 sched_scan_templ_id_2_4; u8 sched_scan_templ_id_5; + u8 max_channels_5; /* per-chip-family private structure */ void *priv; -- cgit v1.2.3 From b6acb4e00e187cb5ae8dd479958a02fe0ea97bf0 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:17 +0200 Subject: wlcore: update acx enum update the acx enum to the new fw api. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/acx.c | 2 +- drivers/net/wireless/ti/wl18xx/acx.h | 8 +++++++- drivers/net/wireless/ti/wlcore/acx.h | 1 - 3 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c index 72840e23bf59..adff9cde7db7 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.c +++ b/drivers/net/wireless/ti/wl18xx/acx.c @@ -75,7 +75,7 @@ int wl18xx_acx_set_checksum_state(struct wl1271 *wl) acx->checksum_state = CHECKSUM_OFFLOAD_ENABLED; - ret = wl1271_cmd_configure(wl, ACX_CHECKSUM_CONFIG, acx, sizeof(*acx)); + ret = wl1271_cmd_configure(wl, ACX_CSUM_CONFIG, acx, sizeof(*acx)); if (ret < 0) { wl1271_warning("failed to set Tx checksum state: %d", ret); goto out; diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h index e2609a6b7341..394d12500834 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.h +++ b/drivers/net/wireless/ti/wl18xx/acx.h @@ -26,7 +26,13 @@ #include "../wlcore/acx.h" enum { - ACX_CLEAR_STATISTICS = 0x0047, + ACX_NS_IPV6_FILTER = 0x0050, + ACX_PEER_HT_OPERATION_MODE_CFG = 0x0051, + ACX_CSUM_CONFIG = 0x0052, + ACX_SIM_CONFIG = 0x0053, + ACX_CLEAR_STATISTICS = 0x0054, + ACX_AUTO_RX_STREAMING = 0x0055, + ACX_PEER_CAP = 0x0056 }; /* numbers of bits the length field takes (add 1 for the actual number) */ diff --git a/drivers/net/wireless/ti/wlcore/acx.h b/drivers/net/wireless/ti/wlcore/acx.h index d03215d6b3bd..126536c6a393 100644 --- a/drivers/net/wireless/ti/wlcore/acx.h +++ b/drivers/net/wireless/ti/wlcore/acx.h @@ -1025,7 +1025,6 @@ enum { ACX_CONFIG_HANGOVER = 0x0042, ACX_FEATURE_CFG = 0x0043, ACX_PROTECTION_CFG = 0x0044, - ACX_CHECKSUM_CONFIG = 0x0045, }; -- cgit v1.2.3 From fcab189027cdd68df7f97474d1419aaa4a82130c Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:18 +0200 Subject: wlcore: update channel_switch/stop_channel_switch commands Some fields were added to the channel_switch and stop_channel_switch commands. Unfortunately, the new 18xx channel_switch struct is not backward compatible with the 12xx channel switch struct. Add a new channel_switch op to wlcore, and update the driver accordingly. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/cmd.c | 37 +++++++++++++++ drivers/net/wireless/ti/wl12xx/cmd.h | 20 +++++++++ drivers/net/wireless/ti/wl12xx/main.c | 1 + drivers/net/wireless/ti/wl18xx/Makefile | 2 +- drivers/net/wireless/ti/wl18xx/cmd.c | 80 +++++++++++++++++++++++++++++++++ drivers/net/wireless/ti/wl18xx/cmd.h | 52 +++++++++++++++++++++ drivers/net/wireless/ti/wl18xx/main.c | 2 + drivers/net/wireless/ti/wlcore/cmd.c | 40 ++--------------- drivers/net/wireless/ti/wlcore/cmd.h | 19 ++------ drivers/net/wireless/ti/wlcore/main.c | 5 +-- drivers/net/wireless/ti/wlcore/wlcore.h | 3 ++ 11 files changed, 204 insertions(+), 57 deletions(-) create mode 100644 drivers/net/wireless/ti/wl18xx/cmd.c create mode 100644 drivers/net/wireless/ti/wl18xx/cmd.h (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/cmd.c b/drivers/net/wireless/ti/wl12xx/cmd.c index 622206241e83..7dc9f965037d 100644 --- a/drivers/net/wireless/ti/wl12xx/cmd.c +++ b/drivers/net/wireless/ti/wl12xx/cmd.c @@ -284,3 +284,40 @@ int wl128x_cmd_radio_parms(struct wl1271 *wl) kfree(radio_parms); return ret; } + +int wl12xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch) +{ + struct wl12xx_cmd_channel_switch *cmd; + int ret; + + wl1271_debug(DEBUG_ACX, "cmd channel switch"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + cmd->channel = ch_switch->channel->hw_value; + cmd->switch_time = ch_switch->count; + cmd->stop_tx = ch_switch->block_tx; + + /* FIXME: control from mac80211 in the future */ + /* Enable TX on the target channel */ + cmd->post_switch_tx_disable = 0; + + ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send channel switch command"); + goto out_free; + } + +out_free: + kfree(cmd); + +out: + return ret; +} diff --git a/drivers/net/wireless/ti/wl12xx/cmd.h b/drivers/net/wireless/ti/wl12xx/cmd.h index 140a0e8829d5..32cbad54e993 100644 --- a/drivers/net/wireless/ti/wl12xx/cmd.h +++ b/drivers/net/wireless/ti/wl12xx/cmd.h @@ -103,10 +103,30 @@ struct wl1271_ext_radio_parms_cmd { u8 padding[3]; } __packed; +struct wl12xx_cmd_channel_switch { + struct wl1271_cmd_header header; + + u8 role_id; + + /* The new serving channel */ + u8 channel; + /* Relative time of the serving channel switch in TBTT units */ + u8 switch_time; + /* Stop the role TX, should expect it after radar detection */ + u8 stop_tx; + /* The target channel tx status 1-stopped 0-open*/ + u8 post_switch_tx_disable; + + u8 padding[3]; +} __packed; + int wl1271_cmd_general_parms(struct wl1271 *wl); int wl128x_cmd_general_parms(struct wl1271 *wl); int wl1271_cmd_radio_parms(struct wl1271 *wl); int wl128x_cmd_radio_parms(struct wl1271 *wl); int wl1271_cmd_ext_radio_parms(struct wl1271 *wl); +int wl12xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); #endif /* __WL12XX_CMD_H__ */ diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 0c81eeb4f5b8..b93de04ccd6a 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1632,6 +1632,7 @@ static struct wlcore_ops wl12xx_ops = { .sched_scan_stop = wl12xx_scan_sched_scan_stop, .get_spare_blocks = wl12xx_get_spare_blocks, .set_key = wl12xx_set_key, + .channel_switch = wl12xx_cmd_channel_switch, .pre_pkt_send = NULL, }; diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile index f74224960c70..81a864f3d793 100644 --- a/drivers/net/wireless/ti/wl18xx/Makefile +++ b/drivers/net/wireless/ti/wl18xx/Makefile @@ -1,3 +1,3 @@ -wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o +wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o cmd.o obj-$(CONFIG_WL18XX) += wl18xx.o diff --git a/drivers/net/wireless/ti/wl18xx/cmd.c b/drivers/net/wireless/ti/wl18xx/cmd.c new file mode 100644 index 000000000000..1d1f6cc7a50a --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/cmd.c @@ -0,0 +1,80 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" +#include "../wlcore/hw_ops.h" + +#include "cmd.h" + +int wl18xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch) +{ + struct wl18xx_cmd_channel_switch *cmd; + u32 supported_rates; + int ret; + + wl1271_debug(DEBUG_ACX, "cmd channel switch"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + cmd->channel = ch_switch->channel->hw_value; + cmd->switch_time = ch_switch->count; + cmd->stop_tx = ch_switch->block_tx; + + switch (ch_switch->channel->band) { + case IEEE80211_BAND_2GHZ: + cmd->band = WLCORE_BAND_2_4GHZ; + break; + case IEEE80211_BAND_5GHZ: + cmd->band = WLCORE_BAND_5GHZ; + break; + default: + wl1271_error("invalid channel switch band: %d", + ch_switch->channel->band); + ret = -EINVAL; + goto out_free; + } + + supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES | + wlcore_hw_sta_get_ap_rate_mask(wl, wlvif); + if (wlvif->p2p) + supported_rates &= ~CONF_TX_CCK_RATES; + cmd->local_supported_rates = cpu_to_le32(supported_rates); + cmd->channel_type = wlvif->channel_type; + + ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send channel switch command"); + goto out_free; + } + +out_free: + kfree(cmd); +out: + return ret; +} diff --git a/drivers/net/wireless/ti/wl18xx/cmd.h b/drivers/net/wireless/ti/wl18xx/cmd.h new file mode 100644 index 000000000000..6687d10899ac --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/cmd.h @@ -0,0 +1,52 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL18XX_CMD_H__ +#define __WL18XX_CMD_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/acx.h" + +struct wl18xx_cmd_channel_switch { + struct wl1271_cmd_header header; + + u8 role_id; + + /* The new serving channel */ + u8 channel; + /* Relative time of the serving channel switch in TBTT units */ + u8 switch_time; + /* Stop the role TX, should expect it after radar detection */ + u8 stop_tx; + + __le32 local_supported_rates; + + u8 channel_type; + u8 band; + + u8 padding[2]; +} __packed; + +int wl18xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); + +#endif diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index e81b3518d288..2e54a3ea813c 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -34,6 +34,7 @@ #include "reg.h" #include "conf.h" +#include "cmd.h" #include "acx.h" #include "tx.h" #include "wl18xx.h" @@ -1335,6 +1336,7 @@ static struct wlcore_ops wl18xx_ops = { .handle_static_data = wl18xx_handle_static_data, .get_spare_blocks = wl18xx_get_spare_blocks, .set_key = wl18xx_set_key, + .channel_switch = wl18xx_cmd_channel_switch, .pre_pkt_send = wl18xx_pre_pkt_send, }; diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index c8c776684d2c..979676529ed0 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -1722,43 +1722,7 @@ out: return ret; } -int wl12xx_cmd_channel_switch(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - struct ieee80211_channel_switch *ch_switch) -{ - struct wl12xx_cmd_channel_switch *cmd; - int ret; - - wl1271_debug(DEBUG_ACX, "cmd channel switch"); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - cmd->role_id = wlvif->role_id; - cmd->channel = ch_switch->channel->hw_value; - cmd->switch_time = ch_switch->count; - cmd->stop_tx = ch_switch->block_tx; - - /* FIXME: control from mac80211 in the future */ - cmd->post_switch_tx_disable = 0; /* Enable TX on the target channel */ - - ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("failed to send channel switch command"); - goto out_free; - } - -out_free: - kfree(cmd); - -out: - return ret; -} - -int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl) +int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl, struct wl12xx_vif *wlvif) { struct wl12xx_cmd_stop_channel_switch *cmd; int ret; @@ -1771,6 +1735,8 @@ int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl) goto out; } + cmd->role_id = wlvif->role_id; + ret = wl1271_cmd_send(wl, CMD_STOP_CHANNEL_SWICTH, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_error("failed to stop channel switch command"); diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 9e9062fdb712..96d53a730a31 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -89,7 +89,8 @@ int wl12xx_cmd_stop_fwlog(struct wl1271 *wl); int wl12xx_cmd_channel_switch(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_channel_switch *ch_switch); -int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl); +int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif); int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); @@ -633,27 +634,13 @@ struct wl12xx_cmd_stop_fwlog { struct wl1271_cmd_header header; } __packed; -struct wl12xx_cmd_channel_switch { +struct wl12xx_cmd_stop_channel_switch { struct wl1271_cmd_header header; u8 role_id; - - /* The new serving channel */ - u8 channel; - /* Relative time of the serving channel switch in TBTT units */ - u8 switch_time; - /* Stop the role TX, should expect it after radar detection */ - u8 stop_tx; - /* The target channel tx status 1-stopped 0-open*/ - u8 post_switch_tx_disable; - u8 padding[3]; } __packed; -struct wl12xx_cmd_stop_channel_switch { - struct wl1271_cmd_header header; -} __packed; - /* Used to check radio status after calibration */ #define MAX_TLV_LENGTH 500 #define TEST_CMD_P2G_CAL 2 /* TX BiP */ diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 0f7a9338d10b..efb770a02822 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2673,7 +2673,7 @@ static int wlcore_unset_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif) if (test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) { struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); - wl12xx_cmd_stop_channel_switch(wl); + wl12xx_cmd_stop_channel_switch(wl, wlvif); ieee80211_chswitch_done(vif, false); } @@ -4680,8 +4680,7 @@ static void wl12xx_op_channel_switch(struct ieee80211_hw *hw, /* TODO: change mac80211 to pass vif as param */ wl12xx_for_each_wlvif_sta(wl, wlvif) { - ret = wl12xx_cmd_channel_switch(wl, wlvif, ch_switch); - + ret = wl->ops->channel_switch(wl, wlvif, ch_switch); if (!ret) set_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags); } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 36fde4e01969..1ad49c9ea7a4 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -95,6 +95,9 @@ struct wlcore_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key_conf); + int (*channel_switch)(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); u32 (*pre_pkt_send)(struct wl1271 *wl, u32 buf_offset, u32 last_len); }; -- cgit v1.2.3 From c50a282515dc7092f7318708a0f3ae7ca7342b9f Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:19 +0200 Subject: wlcore: update events enum/struct to new fw api The event mailbox in wl18xx has a different (non-compatible) structure. Create common functions in wlcore to handle the events, and call them from the chip-specific event mailbox parsers. This way, each driver (wl12xx/wl18xx) extracts the event mailbox by itself according to its own structure, and then calls the common wlcore functions to handle it. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/Makefile | 2 +- drivers/net/wireless/ti/wl12xx/event.c | 112 ++++++++++ drivers/net/wireless/ti/wl12xx/event.h | 111 ++++++++++ drivers/net/wireless/ti/wl12xx/main.c | 24 ++- drivers/net/wireless/ti/wl18xx/Makefile | 2 +- drivers/net/wireless/ti/wl18xx/event.c | 99 +++++++++ drivers/net/wireless/ti/wl18xx/event.h | 76 +++++++ drivers/net/wireless/ti/wl18xx/main.c | 19 +- drivers/net/wireless/ti/wlcore/boot.c | 19 +- drivers/net/wireless/ti/wlcore/cmd.c | 44 +--- drivers/net/wireless/ti/wlcore/cmd.h | 2 + drivers/net/wireless/ti/wlcore/event.c | 338 ++++++++++++++---------------- drivers/net/wireless/ti/wlcore/event.h | 100 +++------ drivers/net/wireless/ti/wlcore/main.c | 133 ++++++++---- drivers/net/wireless/ti/wlcore/scan.c | 8 +- drivers/net/wireless/ti/wlcore/wlcore.h | 15 +- drivers/net/wireless/ti/wlcore/wlcore_i.h | 3 + 17 files changed, 735 insertions(+), 372 deletions(-) create mode 100644 drivers/net/wireless/ti/wl12xx/event.c create mode 100644 drivers/net/wireless/ti/wl12xx/event.h create mode 100644 drivers/net/wireless/ti/wl18xx/event.c create mode 100644 drivers/net/wireless/ti/wl18xx/event.h (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/Makefile b/drivers/net/wireless/ti/wl12xx/Makefile index 8d9afd238adc..e6a24056b3c8 100644 --- a/drivers/net/wireless/ti/wl12xx/Makefile +++ b/drivers/net/wireless/ti/wl12xx/Makefile @@ -1,3 +1,3 @@ -wl12xx-objs = main.o cmd.o acx.o debugfs.o scan.o +wl12xx-objs = main.o cmd.o acx.o debugfs.o scan.o event.o obj-$(CONFIG_WL12XX) += wl12xx.o diff --git a/drivers/net/wireless/ti/wl12xx/event.c b/drivers/net/wireless/ti/wl12xx/event.c new file mode 100644 index 000000000000..6437dac12e70 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/event.c @@ -0,0 +1,112 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "event.h" +#include "scan.h" +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" + +int wl12xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout) +{ + u32 local_event; + + switch (event) { + case WLCORE_EVENT_ROLE_STOP_COMPLETE: + local_event = ROLE_STOP_COMPLETE_EVENT_ID; + break; + + case WLCORE_EVENT_PEER_REMOVE_COMPLETE: + local_event = PEER_REMOVE_COMPLETE_EVENT_ID; + break; + + default: + /* event not implemented */ + return 0; + } + return wlcore_cmd_wait_for_event_or_timeout(wl, local_event, timeout); +} + +int wl12xx_process_mailbox_events(struct wl1271 *wl) +{ + struct wl12xx_event_mailbox *mbox = wl->mbox; + u32 vector; + + + vector = le32_to_cpu(mbox->events_vector); + vector &= ~(le32_to_cpu(mbox->events_mask)); + + wl1271_debug(DEBUG_EVENT, "MBOX vector: 0x%x", vector); + + if (vector & SCAN_COMPLETE_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "status: 0x%x", + mbox->scheduled_scan_status); + + if (wl->scan_wlvif) + wl12xx_scan_completed(wl, wl->scan_wlvif); + } + + if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) + wlcore_event_sched_scan_report(wl, + mbox->scheduled_scan_status); + + if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) + wlcore_event_sched_scan_completed(wl, + mbox->scheduled_scan_status); + if (vector & SOFT_GEMINI_SENSE_EVENT_ID) + wlcore_event_soft_gemini_sense(wl, + mbox->soft_gemini_sense_info); + + if (vector & BSS_LOSE_EVENT_ID) + wlcore_event_beacon_loss(wl, 0xff); + + if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) + wlcore_event_rssi_trigger(wl, mbox->rssi_snr_trigger_metric); + + if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) + wlcore_event_ba_rx_constraint(wl, + BIT(mbox->role_id), + mbox->rx_ba_allowed); + + if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) + wlcore_event_channel_switch(wl, 0xff, + mbox->channel_switch_status); + + if (vector & DUMMY_PACKET_EVENT_ID) + wlcore_event_dummy_packet(wl); + + /* + * "TX retries exceeded" has a different meaning according to mode. + * In AP mode the offending station is disconnected. + */ + if (vector & MAX_TX_RETRY_EVENT_ID) + wlcore_event_max_tx_failure(wl, + le16_to_cpu(mbox->sta_tx_retry_exceeded)); + + if (vector & INACTIVE_STA_EVENT_ID) + wlcore_event_inactive_sta(wl, + le16_to_cpu(mbox->sta_aging_status)); + + if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) + wlcore_event_roc_complete(wl); + + return 0; +} diff --git a/drivers/net/wireless/ti/wl12xx/event.h b/drivers/net/wireless/ti/wl12xx/event.h new file mode 100644 index 000000000000..a5cc3fcd9eea --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/event.h @@ -0,0 +1,111 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_EVENT_H__ +#define __WL12XX_EVENT_H__ + +#include "../wlcore/wlcore.h" + +enum { + MEASUREMENT_START_EVENT_ID = BIT(8), + MEASUREMENT_COMPLETE_EVENT_ID = BIT(9), + SCAN_COMPLETE_EVENT_ID = BIT(10), + WFD_DISCOVERY_COMPLETE_EVENT_ID = BIT(11), + AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12), + RESERVED1 = BIT(13), + PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14), + ROLE_STOP_COMPLETE_EVENT_ID = BIT(15), + RADAR_DETECTED_EVENT_ID = BIT(16), + CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17), + BSS_LOSE_EVENT_ID = BIT(18), + REGAINED_BSS_EVENT_ID = BIT(19), + MAX_TX_RETRY_EVENT_ID = BIT(20), + DUMMY_PACKET_EVENT_ID = BIT(21), + SOFT_GEMINI_SENSE_EVENT_ID = BIT(22), + CHANGE_AUTO_MODE_TIMEOUT_EVENT_ID = BIT(23), + SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24), + PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25), + INACTIVE_STA_EVENT_ID = BIT(26), + PEER_REMOVE_COMPLETE_EVENT_ID = BIT(27), + PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28), + PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29), + BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(30), + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(31), +}; + +struct wl12xx_event_mailbox { + __le32 events_vector; + __le32 events_mask; + __le32 reserved_1; + __le32 reserved_2; + + u8 number_of_scan_results; + u8 scan_tag; + u8 completed_scan_status; + u8 reserved_3; + + u8 soft_gemini_sense_info; + u8 soft_gemini_protective_info; + s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; + u8 change_auto_mode_timeout; + u8 scheduled_scan_status; + u8 reserved4; + /* tuned channel (roc) */ + u8 roc_channel; + + __le16 hlid_removed_bitmap; + + /* bitmap of aged stations (by HLID) */ + __le16 sta_aging_status; + + /* bitmap of stations (by HLID) which exceeded max tx retries */ + __le16 sta_tx_retry_exceeded; + + /* discovery completed results */ + u8 discovery_tag; + u8 number_of_preq_results; + u8 number_of_prsp_results; + u8 reserved_5; + + /* rx ba constraint */ + u8 role_id; /* 0xFF means any role. */ + u8 rx_ba_allowed; + u8 reserved_6[2]; + + /* Channel switch results */ + + u8 channel_switch_role_id; + u8 channel_switch_status; + u8 reserved_7[2]; + + u8 ps_poll_delivery_failure_role_ids; + u8 stopped_role_ids; + u8 started_role_ids; + + u8 reserved_8[9]; +} __packed; + +int wl12xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout); +int wl12xx_process_mailbox_events(struct wl1271 *wl); + +#endif + diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index b93de04ccd6a..7138fe49c63d 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -39,6 +39,7 @@ #include "cmd.h" #include "acx.h" #include "scan.h" +#include "event.h" #include "debugfs.h" static char *fref_param; @@ -1229,6 +1230,23 @@ static int wl12xx_boot(struct wl1271 *wl) if (ret < 0) goto out; + wl->event_mask = BSS_LOSE_EVENT_ID | + REGAINED_BSS_EVENT_ID | + SCAN_COMPLETE_EVENT_ID | + ROLE_STOP_COMPLETE_EVENT_ID | + RSSI_SNR_TRIGGER_0_EVENT_ID | + PSPOLL_DELIVERY_FAILURE_EVENT_ID | + SOFT_GEMINI_SENSE_EVENT_ID | + PERIODIC_SCAN_REPORT_EVENT_ID | + PERIODIC_SCAN_COMPLETE_EVENT_ID | + DUMMY_PACKET_EVENT_ID | + PEER_REMOVE_COMPLETE_EVENT_ID | + BA_SESSION_RX_CONSTRAINT_EVENT_ID | + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | + INACTIVE_STA_EVENT_ID | + MAX_TX_RETRY_EVENT_ID | + CHANNEL_SWITCH_COMPLETE_EVENT_ID; + ret = wlcore_boot_run_firmware(wl); if (ret < 0) goto out; @@ -1609,6 +1627,8 @@ static struct wlcore_ops wl12xx_ops = { .plt_init = wl12xx_plt_init, .trigger_cmd = wl12xx_trigger_cmd, .ack_event = wl12xx_ack_event, + .wait_for_event = wl12xx_wait_for_event, + .process_mailbox_events = wl12xx_process_mailbox_events, .calc_tx_blocks = wl12xx_calc_tx_blocks, .set_tx_desc_blocks = wl12xx_set_tx_desc_blocks, .set_tx_desc_data_len = wl12xx_set_tx_desc_data_len, @@ -1627,7 +1647,6 @@ static struct wlcore_ops wl12xx_ops = { .debugfs_init = wl12xx_debugfs_add_files, .scan_start = wl12xx_scan_start, .scan_stop = wl12xx_scan_stop, - .scan_completed = wl12xx_scan_completed, .sched_scan_start = wl12xx_sched_scan_start, .sched_scan_stop = wl12xx_scan_sched_scan_stop, .get_spare_blocks = wl12xx_get_spare_blocks, @@ -1719,7 +1738,8 @@ static int __devinit wl12xx_probe(struct platform_device *pdev) int ret; hw = wlcore_alloc_hw(sizeof(struct wl12xx_priv), - WL12XX_AGGR_BUFFER_SIZE); + WL12XX_AGGR_BUFFER_SIZE, + sizeof(struct wl12xx_event_mailbox)); if (IS_ERR(hw)) { wl1271_error("can't allocate hw"); ret = PTR_ERR(hw); diff --git a/drivers/net/wireless/ti/wl18xx/Makefile b/drivers/net/wireless/ti/wl18xx/Makefile index 81a864f3d793..ae2b81735785 100644 --- a/drivers/net/wireless/ti/wl18xx/Makefile +++ b/drivers/net/wireless/ti/wl18xx/Makefile @@ -1,3 +1,3 @@ -wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o cmd.o +wl18xx-objs = main.o acx.o tx.o io.o debugfs.o scan.o cmd.o event.o obj-$(CONFIG_WL18XX) += wl18xx.o diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c new file mode 100644 index 000000000000..bf4233c99028 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/event.c @@ -0,0 +1,99 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "event.h" +#include "scan.h" +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" + +int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout) +{ + u32 local_event; + + switch (event) { + case WLCORE_EVENT_PEER_REMOVE_COMPLETE: + local_event = PEER_REMOVE_COMPLETE_EVENT_ID; + break; + + default: + /* event not implemented */ + return 0; + } + return wlcore_cmd_wait_for_event_or_timeout(wl, local_event, timeout); +} + +int wl18xx_process_mailbox_events(struct wl1271 *wl) +{ + struct wl18xx_event_mailbox *mbox = wl->mbox; + u32 vector; + + vector = le32_to_cpu(mbox->events_vector); + wl1271_debug(DEBUG_EVENT, "MBOX vector: 0x%x", vector); + + if (vector & SCAN_COMPLETE_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "scan results: %d", + mbox->number_of_scan_results); + + if (wl->scan_wlvif) + wl18xx_scan_completed(wl, wl->scan_wlvif); + } + + if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) + wlcore_event_sched_scan_completed(wl, 1); + + if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) + wlcore_event_rssi_trigger(wl, mbox->rssi_snr_trigger_metric); + + if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) + wlcore_event_ba_rx_constraint(wl, + le16_to_cpu(mbox->rx_ba_role_id_bitmap), + le16_to_cpu(mbox->rx_ba_allowed_bitmap)); + + if (vector & BSS_LOSS_EVENT_ID) + wlcore_event_beacon_loss(wl, + le16_to_cpu(mbox->bss_loss_bitmap)); + + if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) + wlcore_event_channel_switch(wl, + le16_to_cpu(mbox->channel_switch_role_id_bitmap), + true); + + if (vector & DUMMY_PACKET_EVENT_ID) + wlcore_event_dummy_packet(wl); + + /* + * "TX retries exceeded" has a different meaning according to mode. + * In AP mode the offending station is disconnected. + */ + if (vector & MAX_TX_FAILURE_EVENT_ID) + wlcore_event_max_tx_failure(wl, + le32_to_cpu(mbox->tx_retry_exceeded_bitmap)); + + if (vector & INACTIVE_STA_EVENT_ID) + wlcore_event_inactive_sta(wl, + le32_to_cpu(mbox->inactive_sta_bitmap)); + + if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) + wlcore_event_roc_complete(wl); + + return 0; +} diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h new file mode 100644 index 000000000000..b55fd31e471a --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/event.h @@ -0,0 +1,76 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL18XX_EVENT_H__ +#define __WL18XX_EVENT_H__ + +#include "../wlcore/wlcore.h" + +enum { + SCAN_COMPLETE_EVENT_ID = BIT(8), + RADAR_DETECTED_EVENT_ID = BIT(9), + CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(10), + BSS_LOSS_EVENT_ID = BIT(11), + MAX_TX_FAILURE_EVENT_ID = BIT(12), + DUMMY_PACKET_EVENT_ID = BIT(13), + INACTIVE_STA_EVENT_ID = BIT(14), + PEER_REMOVE_COMPLETE_EVENT_ID = BIT(15), + PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(16), + BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(17), + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(18), + DFS_CHANNELS_CONFIG_COMPLETE_EVENT = BIT(19), +}; + +struct wl18xx_event_mailbox { + __le32 events_vector; + + u8 number_of_scan_results; + u8 number_of_sched_scan_results; + + __le16 channel_switch_role_id_bitmap; + + s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; + + /* bitmap of removed links */ + __le32 hlid_removed_bitmap; + + /* rx ba constraint */ + __le16 rx_ba_role_id_bitmap; /* 0xfff means any role. */ + __le16 rx_ba_allowed_bitmap; + + /* bitmap of roc completed (by role id) */ + __le16 roc_completed_bitmap; + + /* bitmap of stations (by role id) with bss loss */ + __le16 bss_loss_bitmap; + + /* bitmap of stations (by HLID) which exceeded max tx retries */ + __le32 tx_retry_exceeded_bitmap; + + /* bitmap of inactive stations (by HLID) */ + __le32 inactive_sta_bitmap; +} __packed; + +int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout); +int wl18xx_process_mailbox_events(struct wl1271 *wl); + +#endif diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 2e54a3ea813c..0895ffaad5a9 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -40,6 +40,7 @@ #include "wl18xx.h" #include "io.h" #include "scan.h" +#include "event.h" #include "debugfs.h" #define WL18XX_RX_CHECKSUM_MASK 0x40 @@ -851,6 +852,18 @@ static int wl18xx_boot(struct wl1271 *wl) if (ret < 0) goto out; + wl->event_mask = BSS_LOSS_EVENT_ID | + SCAN_COMPLETE_EVENT_ID | + RSSI_SNR_TRIGGER_0_EVENT_ID | + PERIODIC_SCAN_COMPLETE_EVENT_ID | + DUMMY_PACKET_EVENT_ID | + PEER_REMOVE_COMPLETE_EVENT_ID | + BA_SESSION_RX_CONSTRAINT_EVENT_ID | + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | + INACTIVE_STA_EVENT_ID | + MAX_TX_FAILURE_EVENT_ID | + CHANNEL_SWITCH_COMPLETE_EVENT_ID; + ret = wlcore_boot_run_firmware(wl); if (ret < 0) goto out; @@ -1313,6 +1326,8 @@ static struct wlcore_ops wl18xx_ops = { .plt_init = wl18xx_plt_init, .trigger_cmd = wl18xx_trigger_cmd, .ack_event = wl18xx_ack_event, + .wait_for_event = wl18xx_wait_for_event, + .process_mailbox_events = wl18xx_process_mailbox_events, .calc_tx_blocks = wl18xx_calc_tx_blocks, .set_tx_desc_blocks = wl18xx_set_tx_desc_blocks, .set_tx_desc_data_len = wl18xx_set_tx_desc_data_len, @@ -1330,7 +1345,6 @@ static struct wlcore_ops wl18xx_ops = { .debugfs_init = wl18xx_debugfs_add_files, .scan_start = wl18xx_scan_start, .scan_stop = wl18xx_scan_stop, - .scan_completed = wl18xx_scan_completed, .sched_scan_start = wl18xx_sched_scan_start, .sched_scan_stop = wl18xx_scan_sched_scan_stop, .handle_static_data = wl18xx_handle_static_data, @@ -1524,7 +1538,8 @@ static int __devinit wl18xx_probe(struct platform_device *pdev) int ret; hw = wlcore_alloc_hw(sizeof(struct wl18xx_priv), - WL18XX_AGGR_BUFFER_SIZE); + WL18XX_AGGR_BUFFER_SIZE, + sizeof(struct wl18xx_event_mailbox)); if (IS_ERR(hw)) { wl1271_error("can't allocate hw"); ret = PTR_ERR(hw); diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c index 375ea574eafb..230c765ab401 100644 --- a/drivers/net/wireless/ti/wlcore/boot.c +++ b/drivers/net/wireless/ti/wlcore/boot.c @@ -491,7 +491,7 @@ int wlcore_boot_run_firmware(struct wl1271 *wl) if (ret < 0) return ret; - wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox); + wl->mbox_ptr[1] = wl->mbox_ptr[0] + wl->mbox_size; wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x", wl->mbox_ptr[0], wl->mbox_ptr[1]); @@ -508,23 +508,6 @@ int wlcore_boot_run_firmware(struct wl1271 *wl) */ /* unmask required mbox events */ - wl->event_mask = BSS_LOSE_EVENT_ID | - REGAINED_BSS_EVENT_ID | - SCAN_COMPLETE_EVENT_ID | - ROLE_STOP_COMPLETE_EVENT_ID | - RSSI_SNR_TRIGGER_0_EVENT_ID | - PSPOLL_DELIVERY_FAILURE_EVENT_ID | - SOFT_GEMINI_SENSE_EVENT_ID | - PERIODIC_SCAN_REPORT_EVENT_ID | - PERIODIC_SCAN_COMPLETE_EVENT_ID | - DUMMY_PACKET_EVENT_ID | - PEER_REMOVE_COMPLETE_EVENT_ID | - BA_SESSION_RX_CONSTRAINT_EVENT_ID | - REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | - INACTIVE_STA_EVENT_ID | - MAX_TX_RETRY_EVENT_ID | - CHANNEL_SWITCH_COMPLETE_EVENT_ID; - ret = wl1271_event_unmask(wl); if (ret < 0) { wl1271_error("EVENT mask setting failed"); diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 979676529ed0..63102f20df63 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -137,8 +137,8 @@ EXPORT_SYMBOL_GPL(wl1271_cmd_send); * Poll the mailbox event field until any of the bits in the mask is set or a * timeout occurs (WL1271_EVENT_TIMEOUT in msecs) */ -static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, - u32 mask, bool *timeout) +int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl, + u32 mask, bool *timeout) { u32 *events_vector; u32 event; @@ -188,20 +188,7 @@ out: kfree(events_vector); return ret; } - -static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask) -{ - int ret; - bool timeout = false; - - ret = wl1271_cmd_wait_for_event_or_timeout(wl, mask, &timeout); - if (ret != 0 || timeout) { - wl12xx_queue_recovery_work(wl); - return ret; - } - - return 0; -} +EXPORT_SYMBOL_GPL(wlcore_cmd_wait_for_event_or_timeout); int wl12xx_cmd_role_enable(struct wl1271 *wl, u8 *addr, u8 role_type, u8 *role_id) @@ -423,12 +410,6 @@ static int wl12xx_cmd_role_stop_dev(struct wl1271 *wl, goto out_free; } - ret = wl1271_cmd_wait_for_event(wl, ROLE_STOP_COMPLETE_EVENT_ID); - if (ret < 0) { - wl1271_error("cmd role stop dev event completion error"); - goto out_free; - } - wl12xx_free_link(wl, wlvif, &wlvif->dev_hlid); out_free: @@ -516,7 +497,6 @@ int wl12xx_cmd_role_stop_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) { struct wl12xx_cmd_role_stop *cmd; int ret; - bool timeout = false; if (WARN_ON(wlvif->sta.hlid == WL12XX_INVALID_LINK_ID)) return -EINVAL; @@ -539,17 +519,6 @@ int wl12xx_cmd_role_stop_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) goto out_free; } - /* - * Sometimes the firmware doesn't send this event, so we just - * time out without failing. Queue recovery for other - * failures. - */ - ret = wl1271_cmd_wait_for_event_or_timeout(wl, - ROLE_STOP_COMPLETE_EVENT_ID, - &timeout); - if (ret) - wl12xx_queue_recovery_work(wl); - wl12xx_free_link(wl, wlvif, &wlvif->sta.hlid); out_free: @@ -1505,9 +1474,10 @@ int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid) goto out_free; } - ret = wl1271_cmd_wait_for_event_or_timeout(wl, - PEER_REMOVE_COMPLETE_EVENT_ID, - &timeout); + ret = wl->ops->wait_for_event(wl, + WLCORE_EVENT_PEER_REMOVE_COMPLETE, + &timeout); + /* * We are ok with a timeout here. The event is sometimes not sent * due to a firmware bug. In case of another error (like SDIO timeout) diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index 96d53a730a31..46513dac5fb1 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -94,6 +94,8 @@ int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl, int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); +int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl, + u32 mask, bool *timeout); enum wl1271_commands { CMD_INTERROGATE = 1, /* use this to read information elements */ diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index d9353dad08d9..3c20393d255e 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -29,25 +29,29 @@ #include "scan.h" #include "wl12xx_80211.h" -static void wl1271_event_rssi_trigger(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - struct event_mailbox *mbox) +void wlcore_event_rssi_trigger(struct wl1271 *wl, s8 *metric_arr) { - struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; enum nl80211_cqm_rssi_threshold_event event; - s8 metric = mbox->rssi_snr_trigger_metric[0]; + s8 metric = metric_arr[0]; wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric); - if (metric <= wlvif->rssi_thold) - event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW; - else - event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH; - - if (event != wlvif->last_rssi_event) - ieee80211_cqm_rssi_notify(vif, event, GFP_KERNEL); - wlvif->last_rssi_event = event; + /* TODO: check actual multi-role support */ + wl12xx_for_each_wlvif_sta(wl, wlvif) { + if (metric <= wlvif->rssi_thold) + event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW; + else + event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH; + + vif = wl12xx_wlvif_to_vif(wlvif); + if (event != wlvif->last_rssi_event) + ieee80211_cqm_rssi_notify(vif, event, GFP_KERNEL); + wlvif->last_rssi_event = event; + } } +EXPORT_SYMBOL_GPL(wlcore_event_rssi_trigger); static void wl1271_stop_ba_event(struct wl1271 *wl, struct wl12xx_vif *wlvif) { @@ -74,8 +78,7 @@ static void wl1271_stop_ba_event(struct wl1271 *wl, struct wl12xx_vif *wlvif) } } -static void wl12xx_event_soft_gemini_sense(struct wl1271 *wl, - u8 enable) +void wlcore_event_soft_gemini_sense(struct wl1271 *wl, u8 enable) { struct wl12xx_vif *wlvif; @@ -87,210 +90,179 @@ static void wl12xx_event_soft_gemini_sense(struct wl1271 *wl, wl1271_recalc_rx_streaming(wl, wlvif); } } - } +EXPORT_SYMBOL_GPL(wlcore_event_soft_gemini_sense); -static void wl1271_event_mbox_dump(struct event_mailbox *mbox) +void wlcore_event_sched_scan_report(struct wl1271 *wl, + u8 status) { - wl1271_debug(DEBUG_EVENT, "MBOX DUMP:"); - wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector); - wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask); + wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT (status 0x%0x)", + status); + + wl1271_scan_sched_scan_results(wl); } +EXPORT_SYMBOL_GPL(wlcore_event_sched_scan_report); -static int wl1271_event_process(struct wl1271 *wl) +void wlcore_event_sched_scan_completed(struct wl1271 *wl, + u8 status) { - struct event_mailbox *mbox = wl->mbox; - struct ieee80211_vif *vif; - struct wl12xx_vif *wlvif; - u32 vector; - bool disconnect_sta = false; - unsigned long sta_bitmap = 0; - int ret; + wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT (status 0x%0x)", + status); - wl1271_event_mbox_dump(mbox); + if (wl->sched_scanning) { + ieee80211_sched_scan_stopped(wl->hw); + wl->sched_scanning = false; + } +} +EXPORT_SYMBOL_GPL(wlcore_event_sched_scan_completed); - vector = le32_to_cpu(mbox->events_vector); - vector &= ~(le32_to_cpu(mbox->events_mask)); - wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector); +void wlcore_event_ba_rx_constraint(struct wl1271 *wl, + unsigned long roles_bitmap, + unsigned long allowed_bitmap) +{ + struct wl12xx_vif *wlvif; - if (vector & SCAN_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "status: 0x%x", - mbox->scheduled_scan_status); + wl1271_debug(DEBUG_EVENT, "%s: roles=0x%lx allowed=0x%lx", + __func__, roles_bitmap, allowed_bitmap); - if (wl->scan_vif) - wl->ops->scan_completed(wl, - wl12xx_vif_to_data(wl->scan_vif)); - } + wl12xx_for_each_wlvif(wl, wlvif) { + if (wlvif->role_id == WL12XX_INVALID_ROLE_ID || + !test_bit(wlvif->role_id , &roles_bitmap)) + continue; - if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT " - "(status 0x%0x)", mbox->scheduled_scan_status); - - wl1271_scan_sched_scan_results(wl); + wlvif->ba_allowed = !!test_bit(wlvif->role_id, + &allowed_bitmap); + if (!wlvif->ba_allowed) + wl1271_stop_ba_event(wl, wlvif); } +} +EXPORT_SYMBOL_GPL(wlcore_event_ba_rx_constraint); - if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_COMPLETE_EVENT " - "(status 0x%0x)", mbox->scheduled_scan_status); - if (wl->sched_scanning) { - ieee80211_sched_scan_stopped(wl->hw); - wl->sched_scanning = false; - } - } +void wlcore_event_channel_switch(struct wl1271 *wl, + unsigned long roles_bitmap, + bool success) +{ + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; - if (vector & SOFT_GEMINI_SENSE_EVENT_ID) - wl12xx_event_soft_gemini_sense(wl, - mbox->soft_gemini_sense_info); + wl1271_debug(DEBUG_EVENT, "%s: roles=0x%lx success=%d", + __func__, roles_bitmap, success); - /* - * We are HW_MONITOR device. On beacon loss - queue - * connection loss work. Cancel it on REGAINED event. - */ - if (vector & BSS_LOSE_EVENT_ID) { - /* TODO: check for multi-role */ - int delay = wl->conf.conn.synch_fail_thold * - wl->conf.conn.bss_lose_timeout; - wl1271_info("Beacon loss detected."); + wl12xx_for_each_wlvif_sta(wl, wlvif) { + if (wlvif->role_id == WL12XX_INVALID_ROLE_ID || + !test_bit(wlvif->role_id , &roles_bitmap)) + continue; - /* - * if the work is already queued, it should take place. We - * don't want to delay the connection loss indication - * any more. - */ - ieee80211_queue_delayed_work(wl->hw, &wl->connection_loss_work, - msecs_to_jiffies(delay)); + if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, + &wlvif->flags)) + continue; - wl12xx_for_each_wlvif_sta(wl, wlvif) { - vif = wl12xx_wlvif_to_vif(wlvif); + vif = wl12xx_wlvif_to_vif(wlvif); - ieee80211_cqm_rssi_notify( - vif, - NL80211_CQM_RSSI_BEACON_LOSS_EVENT, - GFP_KERNEL); - } + ieee80211_chswitch_done(vif, success); + cancel_delayed_work(&wlvif->channel_switch_work); } +} +EXPORT_SYMBOL_GPL(wlcore_event_channel_switch); - if (vector & REGAINED_BSS_EVENT_ID) { - /* TODO: check for multi-role */ - wl1271_info("Beacon regained."); - cancel_delayed_work(&wl->connection_loss_work); - - /* sanity check - we can't lose and gain the beacon together */ - WARN(vector & BSS_LOSE_EVENT_ID, - "Concurrent beacon loss and gain from FW"); - } +void wlcore_event_dummy_packet(struct wl1271 *wl) +{ + wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID"); + wl1271_tx_dummy_packet(wl); +} +EXPORT_SYMBOL_GPL(wlcore_event_dummy_packet); - if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) { - /* TODO: check actual multi-role support */ - wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT"); - wl12xx_for_each_wlvif_sta(wl, wlvif) { - wl1271_event_rssi_trigger(wl, wlvif, mbox); +static void wlcore_disconnect_sta(struct wl1271 *wl, unsigned long sta_bitmap) +{ + u32 num_packets = wl->conf.tx.max_tx_retries; + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; + struct ieee80211_sta *sta; + const u8 *addr; + int h; + + for_each_set_bit(h, &sta_bitmap, WL12XX_MAX_LINKS) { + bool found = false; + /* find the ap vif connected to this sta */ + wl12xx_for_each_wlvif_ap(wl, wlvif) { + if (!test_bit(h, wlvif->ap.sta_hlid_map)) + continue; + found = true; + break; } - } - - if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) { - u8 role_id = mbox->role_id; - wl1271_debug(DEBUG_EVENT, "BA_SESSION_RX_CONSTRAINT_EVENT_ID. " - "ba_allowed = 0x%x, role_id=%d", - mbox->rx_ba_allowed, role_id); + if (!found) + continue; - wl12xx_for_each_wlvif(wl, wlvif) { - if (role_id != 0xff && role_id != wlvif->role_id) - continue; + vif = wl12xx_wlvif_to_vif(wlvif); + addr = wl->links[h].addr; - wlvif->ba_allowed = !!mbox->rx_ba_allowed; - if (!wlvif->ba_allowed) - wl1271_stop_ba_event(wl, wlvif); + rcu_read_lock(); + sta = ieee80211_find_sta(vif, addr); + if (sta) { + wl1271_debug(DEBUG_EVENT, "remove sta %d", h); + ieee80211_report_low_ack(sta, num_packets); } + rcu_read_unlock(); } +} - if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "CHANNEL_SWITCH_COMPLETE_EVENT_ID. " - "status = 0x%x", - mbox->channel_switch_status); - /* - * That event uses for two cases: - * 1) channel switch complete with status=0 - * 2) channel switch failed status=1 - */ - - /* TODO: configure only the relevant vif */ - wl12xx_for_each_wlvif_sta(wl, wlvif) { - bool success; - - if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, - &wlvif->flags)) - continue; - - success = mbox->channel_switch_status ? false : true; - vif = wl12xx_wlvif_to_vif(wlvif); +void wlcore_event_max_tx_failure(struct wl1271 *wl, unsigned long sta_bitmap) +{ + wl1271_debug(DEBUG_EVENT, "MAX_TX_FAILURE_EVENT_ID"); + wlcore_disconnect_sta(wl, sta_bitmap); +} +EXPORT_SYMBOL_GPL(wlcore_event_max_tx_failure); - ieee80211_chswitch_done(vif, success); - } - } +void wlcore_event_inactive_sta(struct wl1271 *wl, unsigned long sta_bitmap) +{ + wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID"); + wlcore_disconnect_sta(wl, sta_bitmap); +} +EXPORT_SYMBOL_GPL(wlcore_event_inactive_sta); - if ((vector & DUMMY_PACKET_EVENT_ID)) { - wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID"); - ret = wl1271_tx_dummy_packet(wl); - if (ret < 0) - return ret; - } +void wlcore_event_roc_complete(struct wl1271 *wl) +{ + wl1271_debug(DEBUG_EVENT, "REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID"); + if (wl->roc_vif) + ieee80211_ready_on_channel(wl->hw); +} +EXPORT_SYMBOL_GPL(wlcore_event_roc_complete); +void wlcore_event_beacon_loss(struct wl1271 *wl, unsigned long roles_bitmap) +{ /* - * "TX retries exceeded" has a different meaning according to mode. - * In AP mode the offending station is disconnected. + * We are HW_MONITOR device. On beacon loss - queue + * connection loss work. Cancel it on REGAINED event. */ - if (vector & MAX_TX_RETRY_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID"); - sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded); - disconnect_sta = true; - } - - if (vector & INACTIVE_STA_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID"); - sta_bitmap |= le16_to_cpu(mbox->sta_aging_status); - disconnect_sta = true; - } + struct wl12xx_vif *wlvif; + struct ieee80211_vif *vif; + int delay = wl->conf.conn.synch_fail_thold * + wl->conf.conn.bss_lose_timeout; - if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, - "REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID"); - if (wl->roc_vif) - ieee80211_ready_on_channel(wl->hw); - } + wl1271_info("Beacon loss detected. roles:0x%lx", roles_bitmap); - if (disconnect_sta) { - u32 num_packets = wl->conf.tx.max_tx_retries; - struct ieee80211_sta *sta; - const u8 *addr; - int h; - - for_each_set_bit(h, &sta_bitmap, WL12XX_MAX_LINKS) { - bool found = false; - /* find the ap vif connected to this sta */ - wl12xx_for_each_wlvif_ap(wl, wlvif) { - if (!test_bit(h, wlvif->ap.sta_hlid_map)) - continue; - found = true; - break; - } - if (!found) - continue; + wl12xx_for_each_wlvif_sta(wl, wlvif) { + if (wlvif->role_id == WL12XX_INVALID_ROLE_ID || + !test_bit(wlvif->role_id , &roles_bitmap)) + continue; - vif = wl12xx_wlvif_to_vif(wlvif); - addr = wl->links[h].addr; + /* + * if the work is already queued, it should take place. + * We don't want to delay the connection loss + * indication any more. + */ + ieee80211_queue_delayed_work(wl->hw, + &wlvif->connection_loss_work, + msecs_to_jiffies(delay)); - rcu_read_lock(); - sta = ieee80211_find_sta(vif, addr); - if (sta) { - wl1271_debug(DEBUG_EVENT, "remove sta %d", h); - ieee80211_report_low_ack(sta, num_packets); - } - rcu_read_unlock(); - } + vif = wl12xx_wlvif_to_vif(wlvif); + ieee80211_cqm_rssi_notify( + vif, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, + GFP_KERNEL); } - return 0; } +EXPORT_SYMBOL_GPL(wlcore_event_beacon_loss); int wl1271_event_unmask(struct wl1271 *wl) { @@ -314,12 +286,12 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num) /* first we read the mbox descriptor */ ret = wlcore_read(wl, wl->mbox_ptr[mbox_num], wl->mbox, - sizeof(*wl->mbox), false); + wl->mbox_size, false); if (ret < 0) return ret; /* process the descriptor */ - ret = wl1271_event_process(wl); + ret = wl->ops->process_mailbox_events(wl); if (ret < 0) return ret; diff --git a/drivers/net/wireless/ti/wlcore/event.h b/drivers/net/wireless/ti/wlcore/event.h index 8adf18d6c58f..766b02f15780 100644 --- a/drivers/net/wireless/ti/wlcore/event.h +++ b/drivers/net/wireless/ti/wlcore/event.h @@ -46,33 +46,16 @@ enum { RSSI_SNR_TRIGGER_5_EVENT_ID = BIT(5), RSSI_SNR_TRIGGER_6_EVENT_ID = BIT(6), RSSI_SNR_TRIGGER_7_EVENT_ID = BIT(7), - MEASUREMENT_START_EVENT_ID = BIT(8), - MEASUREMENT_COMPLETE_EVENT_ID = BIT(9), - SCAN_COMPLETE_EVENT_ID = BIT(10), - WFD_DISCOVERY_COMPLETE_EVENT_ID = BIT(11), - AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12), - RESERVED1 = BIT(13), - PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14), - ROLE_STOP_COMPLETE_EVENT_ID = BIT(15), - RADAR_DETECTED_EVENT_ID = BIT(16), - CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17), - BSS_LOSE_EVENT_ID = BIT(18), - REGAINED_BSS_EVENT_ID = BIT(19), - MAX_TX_RETRY_EVENT_ID = BIT(20), - DUMMY_PACKET_EVENT_ID = BIT(21), - SOFT_GEMINI_SENSE_EVENT_ID = BIT(22), - CHANGE_AUTO_MODE_TIMEOUT_EVENT_ID = BIT(23), - SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24), - PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25), - INACTIVE_STA_EVENT_ID = BIT(26), - PEER_REMOVE_COMPLETE_EVENT_ID = BIT(27), - PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28), - PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29), - BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(30), - REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(31), + EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff, }; +/* events the driver might want to wait for */ +enum wlcore_wait_event { + WLCORE_EVENT_ROLE_STOP_COMPLETE, + WLCORE_EVENT_PEER_REMOVE_COMPLETE, +}; + enum { EVENT_ENTER_POWER_SAVE_FAIL = 0, EVENT_ENTER_POWER_SAVE_SUCCESS, @@ -80,61 +63,26 @@ enum { #define NUM_OF_RSSI_SNR_TRIGGERS 8 -struct event_mailbox { - __le32 events_vector; - __le32 events_mask; - __le32 reserved_1; - __le32 reserved_2; - - u8 number_of_scan_results; - u8 scan_tag; - u8 completed_scan_status; - u8 reserved_3; - - u8 soft_gemini_sense_info; - u8 soft_gemini_protective_info; - s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; - u8 change_auto_mode_timeout; - u8 scheduled_scan_status; - u8 reserved4; - /* tuned channel (roc) */ - u8 roc_channel; - - __le16 hlid_removed_bitmap; - - /* bitmap of aged stations (by HLID) */ - __le16 sta_aging_status; - - /* bitmap of stations (by HLID) which exceeded max tx retries */ - __le16 sta_tx_retry_exceeded; - - /* discovery completed results */ - u8 discovery_tag; - u8 number_of_preq_results; - u8 number_of_prsp_results; - u8 reserved_5; - - /* rx ba constraint */ - u8 role_id; /* 0xFF means any role. */ - u8 rx_ba_allowed; - u8 reserved_6[2]; - - /* Channel switch results */ - - u8 channel_switch_role_id; - u8 channel_switch_status; - u8 reserved_7[2]; - - u8 ps_poll_delivery_failure_role_ids; - u8 stopped_role_ids; - u8 started_role_ids; - - u8 reserved_8[9]; -} __packed; - struct wl1271; int wl1271_event_unmask(struct wl1271 *wl); int wl1271_event_handle(struct wl1271 *wl, u8 mbox); +void wlcore_event_soft_gemini_sense(struct wl1271 *wl, u8 enable); +void wlcore_event_sched_scan_report(struct wl1271 *wl, + u8 status); +void wlcore_event_sched_scan_completed(struct wl1271 *wl, + u8 status); +void wlcore_event_ba_rx_constraint(struct wl1271 *wl, + unsigned long roles_bitmap, + unsigned long allowed_bitmap); +void wlcore_event_channel_switch(struct wl1271 *wl, + unsigned long roles_bitmap, + bool success); +void wlcore_event_beacon_loss(struct wl1271 *wl, unsigned long roles_bitmap); +void wlcore_event_dummy_packet(struct wl1271 *wl); +void wlcore_event_max_tx_failure(struct wl1271 *wl, unsigned long sta_bitmap); +void wlcore_event_inactive_sta(struct wl1271 *wl, unsigned long sta_bitmap); +void wlcore_event_roc_complete(struct wl1271 *wl); +void wlcore_event_rssi_trigger(struct wl1271 *wl, s8 *metric_arr); #endif diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index efb770a02822..043bf7f7c005 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1139,7 +1139,6 @@ int wl1271_plt_stop(struct wl1271 *wl) cancel_work_sync(&wl->recovery_work); cancel_delayed_work_sync(&wl->elp_work); cancel_delayed_work_sync(&wl->tx_watchdog_work); - cancel_delayed_work_sync(&wl->connection_loss_work); mutex_lock(&wl->mutex); wl1271_power_off(wl); @@ -1841,7 +1840,6 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) cancel_work_sync(&wl->tx_work); cancel_delayed_work_sync(&wl->elp_work); cancel_delayed_work_sync(&wl->tx_watchdog_work); - cancel_delayed_work_sync(&wl->connection_loss_work); /* let's notify MAC80211 about the remaining pending TX frames */ wl12xx_tx_reset(wl); @@ -1916,6 +1914,71 @@ static void wlcore_op_stop(struct ieee80211_hw *hw) mutex_unlock(&wl->mutex); } +static void wlcore_channel_switch_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + struct ieee80211_vif *vif; + struct wl12xx_vif *wlvif; + int ret; + + dwork = container_of(work, struct delayed_work, work); + wlvif = container_of(dwork, struct wl12xx_vif, channel_switch_work); + wl = wlvif->wl; + + wl1271_info("channel switch failed (role_id: %d).", wlvif->role_id); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + /* check the channel switch is still ongoing */ + if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) + goto out; + + vif = wl12xx_wlvif_to_vif(wlvif); + ieee80211_chswitch_done(vif, false); + + ret = wl1271_ps_elp_wakeup(wl); + if (ret < 0) + goto out; + + wl12xx_cmd_stop_channel_switch(wl, wlvif); + + wl1271_ps_elp_sleep(wl); +out: + mutex_unlock(&wl->mutex); +} + +static void wlcore_connection_loss_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + struct ieee80211_vif *vif; + struct wl12xx_vif *wlvif; + + dwork = container_of(work, struct delayed_work, work); + wlvif = container_of(dwork, struct wl12xx_vif, connection_loss_work); + wl = wlvif->wl; + + wl1271_info("Connection loss work (role_id: %d).", wlvif->role_id); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + /* Call mac80211 connection loss */ + if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) + goto out; + + vif = wl12xx_wlvif_to_vif(wlvif); + ieee80211_connection_loss(vif); +out: + mutex_unlock(&wl->mutex); +} + static int wl12xx_allocate_rate_policy(struct wl1271 *wl, u8 *idx) { u8 policy = find_first_zero_bit(wl->rate_policies_map, @@ -2063,6 +2126,10 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif) wl1271_rx_streaming_enable_work); INIT_WORK(&wlvif->rx_streaming_disable_work, wl1271_rx_streaming_disable_work); + INIT_DELAYED_WORK(&wlvif->channel_switch_work, + wlcore_channel_switch_work); + INIT_DELAYED_WORK(&wlvif->connection_loss_work, + wlcore_connection_loss_work); INIT_LIST_HEAD(&wlvif->list); setup_timer(&wlvif->rx_streaming_timer, wl1271_rx_streaming_timer, @@ -2312,7 +2379,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl, wl1271_info("down"); if (wl->scan.state != WL1271_SCAN_STATE_IDLE && - wl->scan_vif == vif) { + wl->scan_wlvif == wlvif) { /* * Rearm the tx watchdog just before idling scan. This * prevents just-finished scans from triggering the watchdog @@ -2321,7 +2388,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl, wl->scan.state = WL1271_SCAN_STATE_IDLE; memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); - wl->scan_vif = NULL; + wl->scan_wlvif = NULL; wl->scan.req = NULL; ieee80211_scan_completed(wl->hw, true); } @@ -2408,6 +2475,7 @@ unlock: del_timer_sync(&wlvif->rx_streaming_timer); cancel_work_sync(&wlvif->rx_streaming_enable_work); cancel_work_sync(&wlvif->rx_streaming_disable_work); + cancel_delayed_work_sync(&wlvif->connection_loss_work); mutex_lock(&wl->mutex); } @@ -2675,6 +2743,7 @@ static int wlcore_unset_assoc(struct wl1271 *wl, struct wl12xx_vif *wlvif) wl12xx_cmd_stop_channel_switch(wl, wlvif); ieee80211_chswitch_done(vif, false); + cancel_delayed_work(&wlvif->channel_switch_work); } /* invalidate keep-alive template */ @@ -3296,7 +3365,7 @@ static void wl1271_op_cancel_hw_scan(struct ieee80211_hw *hw, wl->scan.state = WL1271_SCAN_STATE_IDLE; memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); - wl->scan_vif = NULL; + wl->scan_wlvif = NULL; wl->scan.req = NULL; ieee80211_scan_completed(wl->hw, true); @@ -4087,7 +4156,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, * state changed */ if (!is_ap && (changed & BSS_CHANGED_ASSOC)) - cancel_delayed_work_sync(&wl->connection_loss_work); + cancel_delayed_work_sync(&wlvif->connection_loss_work); if (is_ap && (changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon) @@ -4680,11 +4749,23 @@ static void wl12xx_op_channel_switch(struct ieee80211_hw *hw, /* TODO: change mac80211 to pass vif as param */ wl12xx_for_each_wlvif_sta(wl, wlvif) { + unsigned long delay_usec; + ret = wl->ops->channel_switch(wl, wlvif, ch_switch); - if (!ret) - set_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags); + if (ret) + goto out_sleep; + + set_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags); + + /* indicate failure 5 seconds after channel switch time */ + delay_usec = ieee80211_tu_to_usec(wlvif->beacon_int) * + ch_switch->count; + ieee80211_queue_delayed_work(hw, &wlvif->channel_switch_work, + usecs_to_jiffies(delay_usec) + + msecs_to_jiffies(5000)); } +out_sleep: wl1271_ps_elp_sleep(wl); out: @@ -5193,34 +5274,6 @@ static struct bin_attribute fwlog_attr = { .read = wl1271_sysfs_read_fwlog, }; -static void wl1271_connection_loss_work(struct work_struct *work) -{ - struct delayed_work *dwork; - struct wl1271 *wl; - struct ieee80211_vif *vif; - struct wl12xx_vif *wlvif; - - dwork = container_of(work, struct delayed_work, work); - wl = container_of(dwork, struct wl1271, connection_loss_work); - - wl1271_info("Connection loss work."); - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state != WLCORE_STATE_ON)) - goto out; - - /* Call mac80211 connection loss */ - wl12xx_for_each_wlvif_sta(wl, wlvif) { - if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) - goto out; - vif = wl12xx_wlvif_to_vif(wlvif); - ieee80211_connection_loss(vif); - } -out: - mutex_unlock(&wl->mutex); -} - static void wl12xx_derive_mac_addresses(struct wl1271 *wl, u32 oui, u32 nic) { int i; @@ -5478,7 +5531,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) #define WL1271_DEFAULT_CHANNEL 0 -struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size) +struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, + u32 mbox_size) { struct ieee80211_hw *hw; struct wl1271 *wl; @@ -5522,8 +5576,6 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size) INIT_DELAYED_WORK(&wl->scan_complete_work, wl1271_scan_complete_work); INIT_DELAYED_WORK(&wl->roc_complete_work, wlcore_roc_complete_work); INIT_DELAYED_WORK(&wl->tx_watchdog_work, wl12xx_tx_watchdog_work); - INIT_DELAYED_WORK(&wl->connection_loss_work, - wl1271_connection_loss_work); wl->freezable_wq = create_freezable_workqueue("wl12xx_wq"); if (!wl->freezable_wq) { @@ -5586,7 +5638,8 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size) goto err_dummy_packet; } - wl->mbox = kmalloc(sizeof(*wl->mbox), GFP_KERNEL | GFP_DMA); + wl->mbox_size = mbox_size; + wl->mbox = kmalloc(wl->mbox_size, GFP_KERNEL | GFP_DMA); if (!wl->mbox) { ret = -ENOMEM; goto err_fwlog; diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index e7d0a02be5b0..eeb61889833f 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -35,7 +35,6 @@ void wl1271_scan_complete_work(struct work_struct *work) { struct delayed_work *dwork; struct wl1271 *wl; - struct ieee80211_vif *vif; struct wl12xx_vif *wlvif; int ret; @@ -52,8 +51,7 @@ void wl1271_scan_complete_work(struct work_struct *work) if (wl->scan.state == WL1271_SCAN_STATE_IDLE) goto out; - vif = wl->scan_vif; - wlvif = wl12xx_vif_to_data(vif); + wlvif = wl->scan_wlvif; /* * Rearm the tx watchdog just before idling scan. This @@ -64,7 +62,7 @@ void wl1271_scan_complete_work(struct work_struct *work) wl->scan.state = WL1271_SCAN_STATE_IDLE; memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); wl->scan.req = NULL; - wl->scan_vif = NULL; + wl->scan_wlvif = NULL; ret = wl1271_ps_elp_wakeup(wl); if (ret < 0) @@ -295,7 +293,7 @@ int wlcore_scan(struct wl1271 *wl, struct ieee80211_vif *vif, wl->scan.ssid_len = 0; } - wl->scan_vif = vif; + wl->scan_wlvif = wlvif; wl->scan.req = req; memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 1ad49c9ea7a4..d47eb6c19b0a 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -51,6 +51,9 @@ struct wlcore_ops { int (*trigger_cmd)(struct wl1271 *wl, int cmd_box_addr, void *buf, size_t len); int (*ack_event)(struct wl1271 *wl); + int (*wait_for_event)(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout); + int (*process_mailbox_events)(struct wl1271 *wl); u32 (*calc_tx_blocks)(struct wl1271 *wl, u32 len, u32 spare_blks); void (*set_tx_desc_blocks)(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, @@ -85,7 +88,6 @@ struct wlcore_ops { int (*scan_start)(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct cfg80211_scan_request *req); int (*scan_stop)(struct wl1271 *wl, struct wl12xx_vif *wlvif); - void (*scan_completed)(struct wl1271 *wl, struct wl12xx_vif *wlvif); int (*sched_scan_start)(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct cfg80211_sched_scan_request *req, struct ieee80211_sched_scan_ies *ies); @@ -281,22 +283,20 @@ struct wl1271 { bool watchdog_recovery; /* Pointer that holds DMA-friendly block for the mailbox */ - struct event_mailbox *mbox; + void *mbox; /* The mbox event mask */ u32 event_mask; /* Mailbox pointers */ + u32 mbox_size; u32 mbox_ptr[2]; /* Are we currently scanning */ - struct ieee80211_vif *scan_vif; + struct wl12xx_vif *scan_wlvif; struct wl1271_scan scan; struct delayed_work scan_complete_work; - /* Connection loss work */ - struct delayed_work connection_loss_work; - struct ieee80211_vif *roc_vif; struct delayed_work roc_complete_work; @@ -436,7 +436,8 @@ struct wl1271 { int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev); int __devexit wlcore_remove(struct platform_device *pdev); -struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size); +struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size, + u32 mbox_size); int wlcore_free_hw(struct wl1271 *wl); int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_vif *vif, diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 6678d4b18611..bc3b5f4d1b44 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -421,6 +421,9 @@ struct wl12xx_vif { struct work_struct rx_streaming_disable_work; struct timer_list rx_streaming_timer; + struct delayed_work channel_switch_work; + struct delayed_work connection_loss_work; + /* * This struct must be last! * data that has to be saved acrossed reconfigs (e.g. recovery) -- cgit v1.2.3 From 6b70e7eb70cd6c5ad445ec02f74b84131a4c721a Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Sun, 25 Nov 2012 18:26:59 +0200 Subject: wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein Signed-off-by: Arik Nemtsov Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/event.c | 4 + drivers/net/wireless/ti/wl18xx/main.c | 4 +- drivers/net/wireless/ti/wlcore/cmd.c | 125 ++++++++++++++++++++++++++++++++ drivers/net/wireless/ti/wlcore/cmd.h | 10 +++ drivers/net/wireless/ti/wlcore/event.h | 1 + drivers/net/wireless/ti/wlcore/init.c | 4 + drivers/net/wireless/ti/wlcore/main.c | 34 +++++++++ drivers/net/wireless/ti/wlcore/rx.c | 4 + drivers/net/wireless/ti/wlcore/scan.c | 2 + drivers/net/wireless/ti/wlcore/wlcore.h | 10 +++ 10 files changed, 197 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c index bf4233c99028..02ef5aa9da6b 100644 --- a/drivers/net/wireless/ti/wl18xx/event.c +++ b/drivers/net/wireless/ti/wl18xx/event.c @@ -34,6 +34,10 @@ int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, local_event = PEER_REMOVE_COMPLETE_EVENT_ID; break; + case WLCORE_EVENT_DFS_CONFIG_COMPLETE: + local_event = DFS_CHANNELS_CONFIG_COMPLETE_EVENT; + break; + default: /* event not implemented */ return 0; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 0895ffaad5a9..f1eaf9aebb1e 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -616,6 +616,7 @@ static int wl18xx_identify_chip(struct wl1271 *wl) WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | WLCORE_QUIRK_TX_PAD_LAST_FRAME | + WLCORE_QUIRK_REGDOMAIN_CONF | WLCORE_QUIRK_DUAL_PROBE_TMPL; wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, WL18XX_IFTYPE_VER, @@ -862,7 +863,8 @@ static int wl18xx_boot(struct wl1271 *wl) REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | INACTIVE_STA_EVENT_ID | MAX_TX_FAILURE_EVENT_ID | - CHANNEL_SWITCH_COMPLETE_EVENT_ID; + CHANNEL_SWITCH_COMPLETE_EVENT_ID | + DFS_CHANNELS_CONFIG_COMPLETE_EVENT; ret = wlcore_boot_run_firmware(wl); if (ret < 0) diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 1735a534a89d..599c006f4c47 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -1503,6 +1503,131 @@ out: return ret; } +static int wlcore_get_reg_conf_ch_idx(enum ieee80211_band band, u16 ch) +{ + int idx = -1; + + switch (band) { + case IEEE80211_BAND_5GHZ: + if (ch >= 8 && ch <= 16) + idx = ((ch-8)/4 + 18); + else if (ch >= 34 && ch <= 64) + idx = ((ch-34)/2 + 3 + 18); + else if (ch >= 100 && ch <= 140) + idx = ((ch-100)/4 + 15 + 18); + else if (ch >= 149 && ch <= 165) + idx = ((ch-149)/4 + 26 + 18); + else + idx = -1; + break; + case IEEE80211_BAND_2GHZ: + if (ch >= 1 && ch <= 14) + idx = ch - 1; + else + idx = -1; + break; + default: + wl1271_error("get reg conf ch idx - unknown band: %d", + (int)band); + } + + return idx; +} + +void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel, + enum ieee80211_band band) +{ + int ch_bit_idx = 0; + + if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF)) + return; + + ch_bit_idx = wlcore_get_reg_conf_ch_idx(band, channel); + + if (ch_bit_idx > 0 && ch_bit_idx <= WL1271_MAX_CHANNELS) + set_bit(ch_bit_idx, (long *)wl->reg_ch_conf_pending); +} + +int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl) +{ + struct wl12xx_cmd_regdomain_dfs_config *cmd = NULL; + int ret = 0, i, b, ch_bit_idx; + struct ieee80211_channel *channel; + u32 tmp_ch_bitmap[2]; + u16 ch; + struct wiphy *wiphy = wl->hw->wiphy; + struct ieee80211_supported_band *band; + bool timeout = false; + + if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF)) + return 0; + + wl1271_debug(DEBUG_CMD, "cmd reg domain config"); + + memset(tmp_ch_bitmap, 0, sizeof(tmp_ch_bitmap)); + + for (b = IEEE80211_BAND_2GHZ; b <= IEEE80211_BAND_5GHZ; b++) { + band = wiphy->bands[b]; + for (i = 0; i < band->n_channels; i++) { + channel = &band->channels[i]; + ch = channel->hw_value; + + if (channel->flags & (IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_PASSIVE_SCAN)) + continue; + + ch_bit_idx = wlcore_get_reg_conf_ch_idx(b, ch); + if (ch_bit_idx < 0) + continue; + + set_bit(ch_bit_idx, (long *)tmp_ch_bitmap); + } + } + + tmp_ch_bitmap[0] |= wl->reg_ch_conf_pending[0]; + tmp_ch_bitmap[1] |= wl->reg_ch_conf_pending[1]; + + if (!memcmp(tmp_ch_bitmap, wl->reg_ch_conf_last, sizeof(tmp_ch_bitmap))) + goto out; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->ch_bit_map1 = cpu_to_le32(tmp_ch_bitmap[0]); + cmd->ch_bit_map2 = cpu_to_le32(tmp_ch_bitmap[1]); + + wl1271_debug(DEBUG_CMD, + "cmd reg domain bitmap1: 0x%08x, bitmap2: 0x%08x", + cmd->ch_bit_map1, cmd->ch_bit_map2); + + ret = wl1271_cmd_send(wl, CMD_DFS_CHANNEL_CONFIG, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send reg domain dfs config"); + goto out; + } + + ret = wl->ops->wait_for_event(wl, + WLCORE_EVENT_DFS_CONFIG_COMPLETE, + &timeout); + if (ret < 0 || timeout) { + wl1271_error("reg domain conf %serror", + timeout ? "completion " : ""); + ret = timeout ? -ETIMEDOUT : ret; + goto out; + } + + memcpy(wl->reg_ch_conf_last, tmp_ch_bitmap, sizeof(tmp_ch_bitmap)); + memset(wl->reg_ch_conf_pending, 0, sizeof(wl->reg_ch_conf_pending)); + +out: + kfree(cmd); + return ret; +} + int wl12xx_cmd_config_fwlog(struct wl1271 *wl) { struct wl12xx_cmd_config_fwlog *cmd; diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h index c9f826819f97..7f378b73f022 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.h +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -84,6 +84,9 @@ int wl12xx_croc(struct wl1271 *wl, u8 role_id); int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_sta *sta, u8 hlid); int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid); +void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel, + enum ieee80211_band band); +int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl); int wl12xx_cmd_config_fwlog(struct wl1271 *wl); int wl12xx_cmd_start_fwlog(struct wl1271 *wl); int wl12xx_cmd_stop_fwlog(struct wl1271 *wl); @@ -623,6 +626,13 @@ enum wl12xx_fwlogger_output { WL12XX_FWLOG_OUTPUT_HOST, }; +struct wl12xx_cmd_regdomain_dfs_config { + struct wl1271_cmd_header header; + + __le32 ch_bit_map1; + __le32 ch_bit_map2; +} __packed; + struct wl12xx_cmd_config_fwlog { struct wl1271_cmd_header header; diff --git a/drivers/net/wireless/ti/wlcore/event.h b/drivers/net/wireless/ti/wlcore/event.h index 766b02f15780..b4353be68ddb 100644 --- a/drivers/net/wireless/ti/wlcore/event.h +++ b/drivers/net/wireless/ti/wlcore/event.h @@ -54,6 +54,7 @@ enum { enum wlcore_wait_event { WLCORE_EVENT_ROLE_STOP_COMPLETE, WLCORE_EVENT_PEER_REMOVE_COMPLETE, + WLCORE_EVENT_DFS_CONFIG_COMPLETE }; enum { diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index 06e1bf98f44e..68828b4adc06 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -681,6 +681,10 @@ int wl1271_hw_init(struct wl1271 *wl) if (ret < 0) return ret; + ret = wlcore_cmd_regdomain_config_locked(wl); + if (ret < 0) + return ret; + /* Bluetooth WLAN coexistence */ ret = wl1271_init_pta(wl); if (ret < 0) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 97e4a9c9da70..015d769ae9f7 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -93,6 +93,8 @@ static int wl1271_reg_notify(struct wiphy *wiphy, struct ieee80211_supported_band *band; struct ieee80211_channel *ch; int i; + struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); + struct wl1271 *wl = hw->priv; band = wiphy->bands[IEEE80211_BAND_5GHZ]; for (i = 0; i < band->n_channels; i++) { @@ -106,6 +108,9 @@ static int wl1271_reg_notify(struct wiphy *wiphy, } + if (likely(wl->state == WLCORE_STATE_ON)) + wlcore_regdomain_config(wl); + return 0; } @@ -1900,6 +1905,12 @@ static void wlcore_op_stop_locked(struct wl1271 *wl) wl->tx_res_if = NULL; kfree(wl->target_mem_map); wl->target_mem_map = NULL; + + /* + * FW channels must be re-calibrated after recovery, + * clear the last Reg-Domain channel configuration. + */ + memset(wl->reg_ch_conf_last, 0, sizeof(wl->reg_ch_conf_last)); } static void wlcore_op_stop(struct ieee80211_hw *hw) @@ -3284,6 +3295,29 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd, } EXPORT_SYMBOL_GPL(wlcore_set_key); +void wlcore_regdomain_config(struct wl1271 *wl) +{ + int ret; + + if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF)) + return; + + mutex_lock(&wl->mutex); + ret = wl1271_ps_elp_wakeup(wl); + if (ret < 0) + goto out; + + ret = wlcore_cmd_regdomain_config_locked(wl); + if (ret < 0) { + wl12xx_queue_recovery_work(wl); + goto out; + } + + wl1271_ps_elp_sleep(wl); +out: + mutex_unlock(&wl->mutex); +} + static int wl1271_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_scan_request *req) diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c index 9ee0ec6fd1db..4665b9615dc9 100644 --- a/drivers/net/wireless/ti/wlcore/rx.c +++ b/drivers/net/wireless/ti/wlcore/rx.c @@ -97,6 +97,10 @@ static void wl1271_rx_status(struct wl1271 *wl, wl1271_warning("Michael MIC error"); } } + + if (beacon) + wlcore_set_pending_regdomain_ch(wl, (u16)desc->channel, + status->band); } static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length, diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index eeb61889833f..c9137004982e 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -80,6 +80,8 @@ void wl1271_scan_complete_work(struct work_struct *work) wl12xx_queue_recovery_work(wl); } + wlcore_cmd_regdomain_config_locked(wl); + ieee80211_scan_completed(wl->hw, false); out: diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index e9254b78bac5..d3818ef1bc98 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -284,6 +284,11 @@ struct wl1271 { struct work_struct recovery_work; bool watchdog_recovery; + /* Reg domain last configuration */ + u32 reg_ch_conf_last[2]; + /* Reg domain pending configuration */ + u32 reg_ch_conf_pending[2]; + /* Pointer that holds DMA-friendly block for the mailbox */ void *mbox; @@ -445,6 +450,7 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key_conf); +void wlcore_regdomain_config(struct wl1271 *wl); static inline void wlcore_set_ht_cap(struct wl1271 *wl, enum ieee80211_band band, @@ -503,6 +509,10 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, /* separate probe response templates for one-shot and sched scans */ #define WLCORE_QUIRK_DUAL_PROBE_TMPL BIT(10) +/* Firmware requires reg domain configuration for active calibration */ +#define WLCORE_QUIRK_REGDOMAIN_CONF BIT(11) + + /* TODO: move to the lower drivers when all usages are abstracted */ #define CHIP_ID_1271_PG10 (0x4030101) #define CHIP_ID_1271_PG20 (0x4030111) -- cgit v1.2.3 From 6507babab4f7fe6c51c20abedd66d7449b7a9aca Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 22 Nov 2012 18:06:24 +0200 Subject: wl18xx: make driver operational again we have done updating the driver to the new fw api, so make the driver operational again. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index f1eaf9aebb1e..bb67d701f8a4 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1415,10 +1415,6 @@ static int wl18xx_setup(struct wl1271 *wl) struct wl18xx_priv *priv = wl->priv; int ret; - wl1271_error("driver is in transitional commit (due to fw api" - "change) and can't be booted!"); - return -EINVAL; - wl->rtable = wl18xx_rtable; wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS; -- cgit v1.2.3 From 7c482c1040ae54e89a8fd4d6415577070d5a915d Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 26 Nov 2012 18:05:40 +0200 Subject: wlcore: configure dwell times according to scan type Allow configuring different dwell times to the different scan types (regular and scheduled). Add new configuration entry (dwell_time_dfs) to conf_scan_settings, in order to allow setting different values for normal scan and scheduled scan. Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 4 +-- drivers/net/wireless/ti/wl12xx/scan.c | 7 +++-- drivers/net/wireless/ti/wl18xx/main.c | 4 +-- drivers/net/wireless/ti/wl18xx/scan.c | 6 ++-- drivers/net/wireless/ti/wl18xx/scan.h | 7 ----- drivers/net/wireless/ti/wlcore/conf.h | 18 +++-------- drivers/net/wireless/ti/wlcore/scan.c | 57 ++++++++++++++++++++++++----------- drivers/net/wireless/ti/wlcore/scan.h | 9 +++++- 8 files changed, 64 insertions(+), 48 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 7138fe49c63d..17ee0fd14bcc 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -267,8 +267,8 @@ static struct wlcore_conf wl12xx_conf = { .scan = { .min_dwell_time_active = 7500, .max_dwell_time_active = 30000, - .min_dwell_time_passive = 100000, - .max_dwell_time_passive = 100000, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, .num_probe_reqs = 2, .split_scan_timeout = 50000, }, diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c index a99e8764162d..affdb3ec6225 100644 --- a/drivers/net/wireless/ti/wl12xx/scan.c +++ b/drivers/net/wireless/ti/wl12xx/scan.c @@ -68,9 +68,9 @@ static int wl1271_get_scan_channels(struct wl1271 *wl, cpu_to_le32(c->max_dwell_time_active); } else { channels[j].min_duration = - cpu_to_le32(c->min_dwell_time_passive); + cpu_to_le32(c->dwell_time_passive); channels[j].max_duration = - cpu_to_le32(c->max_dwell_time_passive); + cpu_to_le32(c->dwell_time_passive); } channels[j].early_termination = 0; channels[j].tx_power_att = req->channels[i]->max_power; @@ -364,7 +364,8 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, } if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels, - req->n_channels, req->n_ssids)) { + req->n_channels, req->n_ssids, + SCAN_TYPE_PERIODIC)) { wl1271_error("scan channel list is empty"); ret = -EINVAL; goto out; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index bb67d701f8a4..c015231d295f 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -394,8 +394,8 @@ static struct wlcore_conf wl18xx_conf = { .scan = { .min_dwell_time_active = 7500, .max_dwell_time_active = 30000, - .min_dwell_time_passive = 100000, - .max_dwell_time_passive = 100000, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, .num_probe_reqs = 2, .split_scan_timeout = 50000, }, diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index f31d0d480d1b..daaebad78e1c 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -84,7 +84,8 @@ static int wl18xx_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, } wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, - req->n_channels, req->n_ssids); + req->n_channels, req->n_ssids, + SCAN_TYPE_SEARCH); wl18xx_adjust_channels(cmd, cmd_channels); /* @@ -214,7 +215,8 @@ int wl18xx_scan_sched_scan_config(struct wl1271 *wl, /* configure channels */ wlcore_set_scan_chan_params(wl, cmd_channels, req->channels, - req->n_channels, req->n_ssids); + req->n_channels, req->n_ssids, + SCAN_TYPE_PERIODIC); wl18xx_adjust_channels(cmd, cmd_channels); cmd->short_cycles_sec = 0; diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h index 0e026ecb311e..5eb8c7fc1567 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.h +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -35,13 +35,6 @@ struct tracking_ch_params { u8 padding[2]; } __packed; -enum -{ - SCAN_TYPE_SEARCH = 0, - SCAN_TYPE_PERIODIC = 1, - SCAN_TYPE_TRACKING = 2, -}; - /* probe request rate */ enum { diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index a5d190816f34..c9de4d5c8965 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -1059,19 +1059,11 @@ struct conf_scan_settings { */ u32 max_dwell_time_active; - /* - * The minimum time to wait on each channel for passive scans - * - * Range: u32 tu/1000 - */ - u32 min_dwell_time_passive; + /* time to wait on the channel for passive scans (in TU/1000) */ + u32 dwell_time_passive; - /* - * The maximum time to wait on each channel for passive scans - * - * Range: u32 tu/1000 - */ - u32 max_dwell_time_passive; + /* time to wait on the channel for DFS scans (in TU/1000) */ + u32 dwell_time_dfs; /* * Number of probe requests to transmit on each active scan channel @@ -1281,7 +1273,7 @@ struct conf_hangover_settings { * version, the two LSB are the lower driver's private conf * version. */ -#define WLCORE_CONF_VERSION (0x0002 << 16) +#define WLCORE_CONF_VERSION (0x0003 << 16) #define WLCORE_CONF_MASK 0xffff0000 #define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ sizeof(struct wlcore_conf)) diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index c9137004982e..7f42f8a4d90b 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -97,29 +97,44 @@ wlcore_scan_get_channels(struct wl1271 *wl, struct conn_scan_ch_params *channels, u32 band, bool radar, bool passive, int start, int max_channels, - u8 *n_pactive_ch) + u8 *n_pactive_ch, + int scan_type) { - struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, j; u32 flags; bool force_passive = !n_ssids; - u32 min_dwell_time_active, max_dwell_time_active, delta_per_probe; + u32 min_dwell_time_active, max_dwell_time_active; u32 dwell_time_passive, dwell_time_dfs; - if (band == IEEE80211_BAND_5GHZ) - delta_per_probe = c->dwell_time_delta_per_probe_5; - else - delta_per_probe = c->dwell_time_delta_per_probe; + /* configure dwell times according to scan type */ + if (scan_type == SCAN_TYPE_SEARCH) { + struct conf_scan_settings *c = &wl->conf.scan; - min_dwell_time_active = c->base_dwell_time + - n_ssids * c->num_probe_reqs * delta_per_probe; + min_dwell_time_active = c->min_dwell_time_active; + max_dwell_time_active = c->max_dwell_time_active; + dwell_time_passive = c->dwell_time_passive; + dwell_time_dfs = c->dwell_time_dfs; + } else { + struct conf_sched_scan_settings *c = &wl->conf.sched_scan; + u32 delta_per_probe; + + if (band == IEEE80211_BAND_5GHZ) + delta_per_probe = c->dwell_time_delta_per_probe_5; + else + delta_per_probe = c->dwell_time_delta_per_probe; - max_dwell_time_active = min_dwell_time_active + c->max_dwell_time_delta; + min_dwell_time_active = c->base_dwell_time + + n_ssids * c->num_probe_reqs * delta_per_probe; + max_dwell_time_active = min_dwell_time_active + + c->max_dwell_time_delta; + dwell_time_passive = c->dwell_time_passive; + dwell_time_dfs = c->dwell_time_dfs; + } min_dwell_time_active = DIV_ROUND_UP(min_dwell_time_active, 1000); max_dwell_time_active = DIV_ROUND_UP(max_dwell_time_active, 1000); - dwell_time_passive = DIV_ROUND_UP(c->dwell_time_passive, 1000); - dwell_time_dfs = DIV_ROUND_UP(c->dwell_time_dfs, 1000); + dwell_time_passive = DIV_ROUND_UP(dwell_time_passive, 1000); + dwell_time_dfs = DIV_ROUND_UP(dwell_time_dfs, 1000); for (i = 0, j = start; i < n_channels && j < max_channels; @@ -195,7 +210,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, struct wlcore_scan_channels *cfg, struct ieee80211_channel *channels[], u32 n_channels, - u32 n_ssids) + u32 n_ssids, + int scan_type) { u8 n_pactive_ch = 0; @@ -208,7 +224,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, IEEE80211_BAND_2GHZ, false, true, 0, MAX_CHANNELS_2GHZ, - &n_pactive_ch); + &n_pactive_ch, + scan_type); cfg->active[0] = wlcore_scan_get_channels(wl, channels, @@ -219,7 +236,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, false, false, cfg->passive[0], MAX_CHANNELS_2GHZ, - &n_pactive_ch); + &n_pactive_ch, + scan_type); cfg->passive[1] = wlcore_scan_get_channels(wl, channels, @@ -229,7 +247,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, IEEE80211_BAND_5GHZ, false, true, 0, wl->max_channels_5, - &n_pactive_ch); + &n_pactive_ch, + scan_type); cfg->dfs = wlcore_scan_get_channels(wl, channels, @@ -240,7 +259,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, true, true, cfg->passive[1], wl->max_channels_5, - &n_pactive_ch); + &n_pactive_ch, + scan_type); cfg->active[1] = wlcore_scan_get_channels(wl, channels, @@ -251,7 +271,8 @@ wlcore_set_scan_chan_params(struct wl1271 *wl, false, false, cfg->passive[1] + cfg->dfs, wl->max_channels_5, - &n_pactive_ch); + &n_pactive_ch, + scan_type); /* 802.11j channels are not supported yet */ cfg->passive[2] = 0; diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 8465f35c6a06..9ae606555aeb 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -150,12 +150,19 @@ struct wlcore_scan_channels { struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; }; +enum { + SCAN_TYPE_SEARCH = 0, + SCAN_TYPE_PERIODIC = 1, + SCAN_TYPE_TRACKING = 2, +}; + bool wlcore_set_scan_chan_params(struct wl1271 *wl, struct wlcore_scan_channels *cfg, struct ieee80211_channel *channels[], u32 n_channels, - u32 n_ssids); + u32 n_ssids, + int scan_type); int wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, -- cgit v1.2.3 From 5f9b67770be4201f4449b0f180effecaac4e2686 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Mon, 26 Nov 2012 18:05:41 +0200 Subject: wlcore: use new set bandwidth command to adjusting channel BW We support changing the channel BW when we started the STA role on a 40Mhz bandwidth. Otherwise a reconnection is required. Save the started channel width and use it when channel width updates arrive. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/acx.c | 31 +++++++++++++++++++++++++ drivers/net/wireless/ti/wl18xx/acx.h | 14 ++++++++++++ drivers/net/wireless/ti/wl18xx/main.c | 38 +++++++++++++++++++++++++++++++ drivers/net/wireless/ti/wlcore/cmd.c | 1 + drivers/net/wireless/ti/wlcore/hw_ops.h | 8 +++++++ drivers/net/wireless/ti/wlcore/main.c | 12 ++++++++++ drivers/net/wireless/ti/wlcore/wlcore.h | 2 ++ drivers/net/wireless/ti/wlcore/wlcore_i.h | 2 ++ 8 files changed, 108 insertions(+) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c index adff9cde7db7..801d8af5cef2 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.c +++ b/drivers/net/wireless/ti/wl18xx/acx.c @@ -109,3 +109,34 @@ out: kfree(acx); return ret; } + +int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide) +{ + struct wlcore_peer_ht_operation_mode *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx peer ht operation mode hlid %d bw %d", + hlid, wide); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->hlid = hlid; + acx->bandwidth = wide ? WLCORE_BANDWIDTH_40MHZ : WLCORE_BANDWIDTH_20MHZ; + + ret = wl1271_cmd_configure(wl, ACX_PEER_HT_OPERATION_MODE_CFG, acx, + sizeof(*acx)); + + if (ret < 0) { + wl1271_warning("acx peer ht operation mode failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; + +} diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h index 394d12500834..b57e3483509d 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.h +++ b/drivers/net/wireless/ti/wl18xx/acx.h @@ -284,10 +284,24 @@ struct wl18xx_acx_clear_statistics { struct acx_header header; }; +enum wlcore_bandwidth { + WLCORE_BANDWIDTH_20MHZ, + WLCORE_BANDWIDTH_40MHZ, +}; + +struct wlcore_peer_ht_operation_mode { + struct acx_header header; + + u8 hlid; + u8 bandwidth; /* enum wlcore_bandwidth */ + u8 padding[2]; +}; + int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap, u32 sdio_blk_size, u32 extra_mem_blks, u32 len_field_size); int wl18xx_acx_set_checksum_state(struct wl1271 *wl); int wl18xx_acx_clear_statistics(struct wl1271 *wl); +int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide); #endif /* __WL18XX_ACX_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index c015231d295f..c616c21bd6b7 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1319,6 +1319,43 @@ static u32 wl18xx_pre_pkt_send(struct wl1271 *wl, return buf_offset; } +static void wl18xx_sta_rc_update(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_sta *sta, + u32 changed) +{ + bool wide = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + + wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide); + + if (!(changed & IEEE80211_RC_BW_CHANGED)) + return; + + mutex_lock(&wl->mutex); + + /* sanity */ + if (WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS)) + goto out; + + /* ignore the change before association */ + if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) + goto out; + + /* + * If we started out as wide, we can change the operation mode. If we + * thought this was a 20mhz AP, we have to reconnect + */ + if (wlvif->sta.role_chan_type == NL80211_CHAN_HT40MINUS || + wlvif->sta.role_chan_type == NL80211_CHAN_HT40PLUS) + wl18xx_acx_peer_ht_operation_mode(wl, wlvif->sta.hlid, wide); + else + ieee80211_connection_loss(wl12xx_wlvif_to_vif(wlvif)); + +out: + mutex_unlock(&wl->mutex); +} + + static int wl18xx_setup(struct wl1271 *wl); static struct wlcore_ops wl18xx_ops = { @@ -1354,6 +1391,7 @@ static struct wlcore_ops wl18xx_ops = { .set_key = wl18xx_set_key, .channel_switch = wl18xx_cmd_channel_switch, .pre_pkt_send = wl18xx_pre_pkt_send, + .sta_rc_update = wl18xx_sta_rc_update, }; /* HT cap appropriate for wide channels in 2Ghz */ diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 599c006f4c47..65f071d90727 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -480,6 +480,7 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) goto err_hlid; } + wlvif->sta.role_chan_type = wlvif->channel_type; goto out_free; err_hlid: diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h index 2673d783ec1e..0e0b6563a3ff 100644 --- a/drivers/net/wireless/ti/wlcore/hw_ops.h +++ b/drivers/net/wireless/ti/wlcore/hw_ops.h @@ -201,4 +201,12 @@ wlcore_hw_pre_pkt_send(struct wl1271 *wl, u32 buf_offset, u32 last_len) return buf_offset; } +static inline void +wlcore_hw_sta_rc_update(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct ieee80211_sta *sta, u32 changed) +{ + if (wl->ops->sta_rc_update) + wl->ops->sta_rc_update(wl, wlvif, sta, changed); +} + #endif diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index cce73c417dec..59ad288a1b8f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4948,6 +4948,17 @@ static int wlcore_op_cancel_remain_on_channel(struct ieee80211_hw *hw) return 0; } +static void wlcore_op_sta_rc_update(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + u32 changed) +{ + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + struct wl1271 *wl = hw->priv; + + wlcore_hw_sta_rc_update(wl, wlvif, sta, changed); +} + static bool wl1271_tx_frames_pending(struct ieee80211_hw *hw) { struct wl1271 *wl = hw->priv; @@ -5146,6 +5157,7 @@ static const struct ieee80211_ops wl1271_ops = { .change_chanctx = wlcore_op_change_chanctx, .assign_vif_chanctx = wlcore_op_assign_vif_chanctx, .unassign_vif_chanctx = wlcore_op_unassign_vif_chanctx, + .sta_rc_update = wlcore_op_sta_rc_update, CFG80211_TESTMODE_CMD(wl1271_tm_cmd) }; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index b31589792dfd..037c56e6cae0 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -101,6 +101,8 @@ struct wlcore_ops { struct wl12xx_vif *wlvif, struct ieee80211_channel_switch *ch_switch); u32 (*pre_pkt_send)(struct wl1271 *wl, u32 buf_offset, u32 last_len); + void (*sta_rc_update)(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct ieee80211_sta *sta, u32 changed); }; enum wlcore_partitions { diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 6be1e8ef55bc..e3a77aa932d2 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -341,6 +341,8 @@ struct wl12xx_vif { u8 klv_template_id; bool qos; + /* channel type we started the STA role with */ + enum nl80211_channel_type role_chan_type; } sta; struct { u8 global_hlid; -- cgit v1.2.3 From de40750f4b10aa236ae44a9a3f10f50998e1c345 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Mon, 26 Nov 2012 18:05:44 +0200 Subject: wlcore/wl18xx/wl12xx: separate channel count between chips 18xx chips are capable of staying on 2 channels at the same time. Introduce a chip-family specific parameter to set the number of channels in the interface-combinations published by the driver. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 1 + drivers/net/wireless/ti/wl18xx/main.c | 1 + drivers/net/wireless/ti/wlcore/main.c | 4 ++-- drivers/net/wireless/ti/wlcore/wlcore.h | 3 +++ 4 files changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 17ee0fd14bcc..97cc79c1bcf0 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1676,6 +1676,7 @@ static int wl12xx_setup(struct wl1271 *wl) wl->rtable = wl12xx_rtable; wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS; wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS; + wl->num_channels = 1; wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES; wl->band_rate_to_idx = wl12xx_band_rate_to_idx; wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index c616c21bd6b7..18a01b404ea5 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1456,6 +1456,7 @@ static int wl18xx_setup(struct wl1271 *wl) wl->rtable = wl18xx_rtable; wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS; + wl->num_channels = 2; wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES; wl->band_rate_to_idx = wl18xx_band_rate_to_idx; wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 603cafc06a58..4bdf3d7b947e 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5464,10 +5464,9 @@ static const struct ieee80211_iface_limit wlcore_iface_limits[] = { }, }; -static const struct ieee80211_iface_combination +static struct ieee80211_iface_combination wlcore_iface_combinations[] = { { - .num_different_channels = 1, .max_interfaces = 3, .limits = wlcore_iface_limits, .n_limits = ARRAY_SIZE(wlcore_iface_limits), @@ -5570,6 +5569,7 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P; /* allowed interface combinations */ + wlcore_iface_combinations[0].num_different_channels = wl->num_channels; wl->hw->wiphy->iface_combinations = wlcore_iface_combinations; wl->hw->wiphy->n_iface_combinations = ARRAY_SIZE(wlcore_iface_combinations); diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 037c56e6cae0..5f580e56a19b 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -441,6 +441,9 @@ struct wl1271 { unsigned int min_fw_ver[NUM_FW_VER]; struct completion nvs_loading_complete; + + /* number of concurrent channels the HW supports */ + u32 num_channels; }; int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev); -- cgit v1.2.3 From 7230341f254c9bce39e9576362f18b94854bc779 Mon Sep 17 00:00:00 2001 From: Yair Shapira Date: Mon, 26 Nov 2012 18:05:50 +0200 Subject: wlcore/wl18xx/wl12xx: add recovery settings to conf add support for recovery settings including bug_on_recovery and no_recovery options. These options can now be set using wl18xx-conf.bin file and wlconf tool. Signed-off-by: Yair Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 4 ++++ drivers/net/wireless/ti/wl18xx/main.c | 4 ++++ drivers/net/wireless/ti/wlcore/conf.h | 11 ++++++++++- drivers/net/wireless/ti/wlcore/main.c | 19 +++++++++++++------ 4 files changed, 31 insertions(+), 7 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 97cc79c1bcf0..aa73ada06463 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -370,6 +370,10 @@ static struct wlcore_conf wl12xx_conf = { .increase_time = 1, .window_size = 16, }, + .recovery = { + .bug_on_recovery = 0, + .no_recovery = 0, + }, }; static struct wl12xx_priv_conf wl12xx_default_priv_conf = { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 18a01b404ea5..98d034b4530d 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -492,6 +492,10 @@ static struct wlcore_conf wl18xx_conf = { .increase_time = 1, .window_size = 16, }, + .recovery = { + .bug_on_recovery = 0, + .no_recovery = 0, + }, }; static struct wl18xx_priv_conf wl18xx_default_priv_conf = { diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index c9de4d5c8965..1bd831c9e843 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -1268,12 +1268,20 @@ struct conf_hangover_settings { u8 window_size; } __packed; +struct conf_recovery_settings { + /* BUG() on fw recovery */ + u8 bug_on_recovery; + + /* Prevent HW recovery. FW will remain stuck. */ + u8 no_recovery; +} __packed; + /* * The conf version consists of 4 bytes. The two MSB are the wlcore * version, the two LSB are the lower driver's private conf * version. */ -#define WLCORE_CONF_VERSION (0x0003 << 16) +#define WLCORE_CONF_VERSION (0x0004 << 16) #define WLCORE_CONF_MASK 0xffff0000 #define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ sizeof(struct wlcore_conf)) @@ -1301,6 +1309,7 @@ struct wlcore_conf { struct conf_fwlog fwlog; struct conf_rate_policy_settings rate; struct conf_hangover_settings hangover; + struct conf_recovery_settings recovery; } __packed; struct wlcore_conf_file { diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 615b40dc981e..4dfd533a81c1 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -56,8 +56,8 @@ #define WL1271_BOOT_RETRIES 3 static char *fwlog_param; -static bool bug_on_recovery; -static bool no_recovery; +static int bug_on_recovery = -1; +static int no_recovery = -1; static void __wl1271_op_remove_interface(struct wl1271 *wl, struct ieee80211_vif *vif, @@ -306,6 +306,7 @@ out: static void wlcore_adjust_conf(struct wl1271 *wl) { /* Adjust settings according to optional module parameters */ + if (fwlog_param) { if (!strcmp(fwlog_param, "continuous")) { wl->conf.fwlog.mode = WL12XX_FWLOG_CONTINUOUS; @@ -321,6 +322,12 @@ static void wlcore_adjust_conf(struct wl1271 *wl) wl1271_error("Unknown fwlog parameter %s", fwlog_param); } } + + if (bug_on_recovery != -1) + wl->conf.recovery.bug_on_recovery = (u8) bug_on_recovery; + + if (no_recovery != -1) + wl->conf.recovery.no_recovery = (u8) no_recovery; } static void wl12xx_irq_ps_regulate_link(struct wl1271 *wl, @@ -903,10 +910,10 @@ static void wl1271_recovery_work(struct work_struct *work) wlcore_print_recovery(wl); } - BUG_ON(bug_on_recovery && + BUG_ON(wl->conf.recovery.bug_on_recovery && !test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags)); - if (no_recovery) { + if (wl->conf.recovery.no_recovery) { wl1271_info("No recovery (chosen on module load). Fw will remain stuck."); goto out_unlock; } @@ -6013,10 +6020,10 @@ module_param_named(fwlog, fwlog_param, charp, 0); MODULE_PARM_DESC(fwlog, "FW logger options: continuous, ondemand, dbgpins or disable"); -module_param(bug_on_recovery, bool, S_IRUSR | S_IWUSR); +module_param(bug_on_recovery, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(bug_on_recovery, "BUG() on fw recovery"); -module_param(no_recovery, bool, S_IRUSR | S_IWUSR); +module_param(no_recovery, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(no_recovery, "Prevent HW recovery. FW will remain stuck."); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 8675f9abdf5b67a3f621fa99e1f0e0c8d8ae2531 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 27 Nov 2012 15:52:00 +0200 Subject: wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions Previously we were only checking the single-role firmware version. Now add code to check for the firmware versions separately for each firmware type. Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 24 +++++++++++++++--------- drivers/net/wireless/ti/wl12xx/wl12xx.h | 32 ++++++++++++++++++++++---------- drivers/net/wireless/ti/wl18xx/main.c | 8 +++++--- drivers/net/wireless/ti/wlcore/boot.c | 3 ++- drivers/net/wireless/ti/wlcore/wlcore.h | 29 ++++++++++++++++++++--------- 5 files changed, 64 insertions(+), 32 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 07f7f76a0783..37e577ff17cb 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -653,9 +653,11 @@ static int wl12xx_identify_chip(struct wl1271 *wl) /* read data preparation is only needed by wl127x */ wl->ops->prepare_read = wl127x_prepare_read; - wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, WL127X_IFTYPE_VER, - WL127X_MAJOR_VER, WL127X_SUBTYPE_VER, - WL127X_MINOR_VER); + wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, + WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER, + WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER, + WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER, + WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER); break; case CHIP_ID_127X_PG20: @@ -675,9 +677,11 @@ static int wl12xx_identify_chip(struct wl1271 *wl) /* read data preparation is only needed by wl127x */ wl->ops->prepare_read = wl127x_prepare_read; - wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, WL127X_IFTYPE_VER, - WL127X_MAJOR_VER, WL127X_SUBTYPE_VER, - WL127X_MINOR_VER); + wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, + WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER, + WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER, + WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER, + WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER); break; case CHIP_ID_128X_PG20: @@ -693,9 +697,11 @@ static int wl12xx_identify_chip(struct wl1271 *wl) WLCORE_QUIRK_TKIP_HEADER_SPACE | WLCORE_QUIRK_START_STA_FAILS; - wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, WL128X_IFTYPE_VER, - WL128X_MAJOR_VER, WL128X_SUBTYPE_VER, - WL128X_MINOR_VER); + wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, + WL128X_IFTYPE_SR_VER, WL128X_MAJOR_SR_VER, + WL128X_SUBTYPE_SR_VER, WL128X_MINOR_SR_VER, + WL128X_IFTYPE_MR_VER, WL128X_MAJOR_MR_VER, + WL128X_SUBTYPE_MR_VER, WL128X_MINOR_MR_VER); break; case CHIP_ID_128X_PG10: default: diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 310df5200c26..a07be5e022fb 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -30,19 +30,31 @@ #define CHIP_ID_128X_PG10 (0x05030101) #define CHIP_ID_128X_PG20 (0x05030111) -/* minimum FW required for driver for wl127x */ +/* FW chip version for wl127x */ #define WL127X_CHIP_VER 6 -#define WL127X_IFTYPE_VER WLCORE_FW_VER_IGNORE -#define WL127X_MAJOR_VER 10 -#define WL127X_SUBTYPE_VER WLCORE_FW_VER_IGNORE -#define WL127X_MINOR_VER 115 +/* minimum single-role FW version for wl127x */ +#define WL127X_IFTYPE_SR_VER 3 +#define WL127X_MAJOR_SR_VER 10 +#define WL127X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE +#define WL127X_MINOR_SR_VER 115 +/* minimum multi-role FW version for wl127x */ +#define WL127X_IFTYPE_MR_VER 5 +#define WL127X_MAJOR_MR_VER 7 +#define WL127X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE +#define WL127X_MINOR_MR_VER 115 -/* minimum FW required for driver for wl128x */ +/* FW chip version for wl128x */ #define WL128X_CHIP_VER 7 -#define WL128X_IFTYPE_VER WLCORE_FW_VER_IGNORE -#define WL128X_MAJOR_VER 10 -#define WL128X_SUBTYPE_VER WLCORE_FW_VER_IGNORE -#define WL128X_MINOR_VER 115 +/* minimum single-role FW version for wl128x */ +#define WL128X_IFTYPE_SR_VER 3 +#define WL128X_MAJOR_SR_VER 10 +#define WL128X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE +#define WL128X_MINOR_SR_VER 115 +/* minimum multi-role FW version for wl128x */ +#define WL128X_IFTYPE_MR_VER 5 +#define WL128X_MAJOR_MR_VER 7 +#define WL128X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE +#define WL128X_MINOR_MR_VER 42 #define WL12XX_AGGR_BUFFER_SIZE (4 * PAGE_SIZE) diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 98d034b4530d..08c3a2fc427e 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -623,9 +623,11 @@ static int wl18xx_identify_chip(struct wl1271 *wl) WLCORE_QUIRK_REGDOMAIN_CONF | WLCORE_QUIRK_DUAL_PROBE_TMPL; - wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, WL18XX_IFTYPE_VER, - WL18XX_MAJOR_VER, WL18XX_SUBTYPE_VER, - WL18XX_MINOR_VER); + wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, + WL18XX_IFTYPE_VER, WL18XX_MAJOR_VER, + WL18XX_SUBTYPE_VER, WL18XX_MINOR_VER, + /* there's no separate multi-role FW */ + 0, 0, 0, 0); break; case CHIP_ID_185x_PG10: wl1271_warning("chip id 0x%x (185x PG10) is deprecated", diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c index 2c57246b6a85..b58ae5fc1487 100644 --- a/drivers/net/wireless/ti/wlcore/boot.c +++ b/drivers/net/wireless/ti/wlcore/boot.c @@ -84,7 +84,8 @@ out: static int wlcore_validate_fw_ver(struct wl1271 *wl) { unsigned int *fw_ver = wl->chip.fw_ver; - unsigned int *min_ver = wl->min_fw_ver; + unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_NORMAL) ? + wl->min_sr_fw_ver : wl->min_mr_fw_ver; char min_fw_str[32] = ""; int i; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 66b8306883d2..32987d0a5f73 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -439,8 +439,11 @@ struct wl1271 { /* the number of allocated MAC addresses in this chip */ int num_mac_addr; - /* the minimum FW version required for the driver to work */ - unsigned int min_fw_ver[NUM_FW_VER]; + /* minimum FW version required for the driver to work in single-role */ + unsigned int min_sr_fw_ver[NUM_FW_VER]; + + /* minimum FW version required for the driver to work in multi-role */ + unsigned int min_mr_fw_ver[NUM_FW_VER]; struct completion nvs_loading_complete; @@ -471,14 +474,22 @@ wlcore_set_ht_cap(struct wl1271 *wl, enum ieee80211_band band, static inline void wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, - unsigned int iftype, unsigned int major, - unsigned int subtype, unsigned int minor) + unsigned int iftype_sr, unsigned int major_sr, + unsigned int subtype_sr, unsigned int minor_sr, + unsigned int iftype_mr, unsigned int major_mr, + unsigned int subtype_mr, unsigned int minor_mr) { - wl->min_fw_ver[FW_VER_CHIP] = chip; - wl->min_fw_ver[FW_VER_IF_TYPE] = iftype; - wl->min_fw_ver[FW_VER_MAJOR] = major; - wl->min_fw_ver[FW_VER_SUBTYPE] = subtype; - wl->min_fw_ver[FW_VER_MINOR] = minor; + wl->min_sr_fw_ver[FW_VER_CHIP] = chip; + wl->min_sr_fw_ver[FW_VER_IF_TYPE] = iftype_sr; + wl->min_sr_fw_ver[FW_VER_MAJOR] = major_sr; + wl->min_sr_fw_ver[FW_VER_SUBTYPE] = subtype_sr; + wl->min_sr_fw_ver[FW_VER_MINOR] = minor_sr; + + wl->min_mr_fw_ver[FW_VER_CHIP] = chip; + wl->min_mr_fw_ver[FW_VER_IF_TYPE] = iftype_mr; + wl->min_mr_fw_ver[FW_VER_MAJOR] = major_mr; + wl->min_mr_fw_ver[FW_VER_SUBTYPE] = subtype_mr; + wl->min_mr_fw_ver[FW_VER_MINOR] = minor_mr; } /* Firmware image load chunk size */ -- cgit v1.2.3 From 2f24456149110f4d9f0547429f1249d40143561d Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 27 Nov 2012 15:52:01 +0200 Subject: wl18xx: ignore irrelevant firmware version fields For wl18xx, only the chip ID and the minor version number are relevant. Ignore the other numbers which are either not used or relate to internal projects or internal branches. Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/wl18xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index 4d295a574a87..3105fbf79ae4 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -27,8 +27,8 @@ /* minimum FW required for driver */ #define WL18XX_CHIP_VER 8 #define WL18XX_IFTYPE_VER 5 -#define WL18XX_MAJOR_VER 0 -#define WL18XX_SUBTYPE_VER 0 +#define WL18XX_MAJOR_VER WLCORE_FW_VER_IGNORE +#define WL18XX_SUBTYPE_VER WLCORE_FW_VER_IGNORE #define WL18XX_MINOR_VER 28 #define WL18XX_CMD_MAX_SIZE 740 -- cgit v1.2.3 From ec4f4b76a622822d5d47e99bf4062fc308a7d424 Mon Sep 17 00:00:00 2001 From: Ido Reis Date: Tue, 27 Nov 2012 08:44:42 +0200 Subject: wl18xx: update default mac/phy parameters Update mac/phy paramters according to the default HP SISO boards. Signed-off-by: Ido Reis Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/conf.h | 17 +++++++++++------ drivers/net/wireless/ti/wl18xx/main.c | 5 +++-- 2 files changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h index 4d426cc20274..1cb313fe368b 100644 --- a/drivers/net/wireless/ti/wl18xx/conf.h +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -23,20 +23,21 @@ #define __WL18XX_CONF_H__ #define WL18XX_CONF_MAGIC 0x10e100ca -#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0003) +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0004) #define WL18XX_CONF_MASK 0x0000ffff #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ sizeof(struct wl18xx_priv_conf)) #define NUM_OF_CHANNELS_11_ABG 150 #define NUM_OF_CHANNELS_11_P 7 -#define WL18XX_NUM_OF_SUB_BANDS 9 #define SRF_TABLE_LEN 16 #define PIN_MUXING_SIZE 2 +#define WL18XX_TRACE_LOSS_GAPS_TX 10 +#define WL18XX_TRACE_LOSS_GAPS_RX 18 struct wl18xx_mac_and_phy_params { u8 phy_standalone; - u8 rdl; + u8 spare0; u8 enable_clpc; u8 enable_tx_low_pwr_on_siso_rdl; u8 auto_detect; @@ -69,8 +70,8 @@ struct wl18xx_mac_and_phy_params { u8 pwr_limit_reference_11_abg; u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; u8 pwr_limit_reference_11p; - u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS]; - u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS]; + u8 spare1[9]; + u8 spare2[9]; u8 primary_clock_setting_time; u8 clock_valid_on_wake_up; u8 secondary_clock_setting_time; @@ -81,7 +82,11 @@ struct wl18xx_mac_and_phy_params { s8 low_power_val; s8 med_power_val; s8 high_power_val; - u8 padding[1]; + s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX]; + s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX]; + u8 tx_rf_margin; + + u8 padding[4]; } __packed; enum wl18xx_ht_mode { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 08c3a2fc427e..3588e340634a 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -508,7 +508,6 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .clock_valid_on_wake_up = 0x00, .secondary_clock_setting_time = 0x05, .board_type = BOARD_TYPE_HDK_18XX, - .rdl = 0x01, .auto_detect = 0x00, .dedicated_fem = FEM_NONE, .low_band_component = COMPONENT_3_WAY_SWITCH, @@ -525,13 +524,15 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .enable_tx_low_pwr_on_siso_rdl = 0x00, .rx_profile = 0x00, .pwr_limit_reference_11_abg = 0xc8, + .pwr_limit_reference_11p = 0xc8, .psat = 0, .low_power_val = 0x00, .med_power_val = 0x0a, - .high_power_val = 0x1e, + .high_power_val = 0x11, .external_pa_dc2dc = 0, .number_of_assembled_ant2_4 = 1, .number_of_assembled_ant5 = 1, + .tx_rf_margin = 1, }, }; -- cgit v1.2.3 From d88949b7def1e982871406f3ad3efa361ffa6ffc Mon Sep 17 00:00:00 2001 From: Yair Shapira Date: Tue, 27 Nov 2012 08:44:43 +0200 Subject: wl18xx: support 2nd set of mac/phy tx-power params First set (low, medium and high TX power values) is used for STA-HP background role. The 2nd set is used for other roles. Update other mac/phy parameters according to new FW. Signed-off-by: Yair Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho Conflicts: drivers/net/wireless/ti/wl18xx/main.c --- drivers/net/wireless/ti/wl18xx/conf.h | 10 +++++++--- drivers/net/wireless/ti/wl18xx/main.c | 35 +++++++++++++++++++++++++++++------ 2 files changed, 36 insertions(+), 9 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h index 1cb313fe368b..b5f114857191 100644 --- a/drivers/net/wireless/ti/wl18xx/conf.h +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -23,7 +23,7 @@ #define __WL18XX_CONF_H__ #define WL18XX_CONF_MAGIC 0x10e100ca -#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0004) +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0005) #define WL18XX_CONF_MASK 0x0000ffff #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ sizeof(struct wl18xx_priv_conf)) @@ -78,15 +78,19 @@ struct wl18xx_mac_and_phy_params { u8 board_type; /* enable point saturation */ u8 psat; - /* low/medium/high Tx power in dBm */ + /* low/medium/high Tx power in dBm for STA-HP BG */ s8 low_power_val; s8 med_power_val; s8 high_power_val; s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX]; s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX]; u8 tx_rf_margin; + /* low/medium/high Tx power in dBm for other role */ + s8 low_power_val_2nd; + s8 med_power_val_2nd; + s8 high_power_val_2nd; - u8 padding[4]; + u8 padding[1]; } __packed; enum wl18xx_ht_mode { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 3588e340634a..a45ecffef01a 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -523,14 +523,37 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .enable_clpc = 0x00, .enable_tx_low_pwr_on_siso_rdl = 0x00, .rx_profile = 0x00, - .pwr_limit_reference_11_abg = 0xc8, - .pwr_limit_reference_11p = 0xc8, + .pwr_limit_reference_11_abg = 0x64, + .per_chan_pwr_limit_arr_11abg = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, + .pwr_limit_reference_11p = 0x64, + .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff }, .psat = 0, - .low_power_val = 0x00, - .med_power_val = 0x0a, - .high_power_val = 0x11, + .low_power_val = 0x08, + .med_power_val = 0x12, + .high_power_val = 0x18, + .low_power_val_2nd = 0x05, + .med_power_val_2nd = 0x0a, + .high_power_val_2nd = 0x14, .external_pa_dc2dc = 0, - .number_of_assembled_ant2_4 = 1, + .number_of_assembled_ant2_4 = 2, .number_of_assembled_ant5 = 1, .tx_rf_margin = 1, }, -- cgit v1.2.3 From 2718bf409937655f9b0bbc174faee3ac2ecf1062 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 27 Nov 2012 08:44:47 +0200 Subject: wlcore: remove WLCORE_QUIRK_NO_ELP all the current firmwares support elp, so we can safely remove WLCORE_QUIRK_NO_ELP. Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 3 +-- drivers/net/wireless/ti/wlcore/init.c | 3 --- drivers/net/wireless/ti/wlcore/main.c | 3 --- drivers/net/wireless/ti/wlcore/wlcore.h | 3 --- 4 files changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a45ecffef01a..4621d67cfe2d 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -639,8 +639,7 @@ static int wl18xx_identify_chip(struct wl1271 *wl) wl->sr_fw_name = WL18XX_FW_NAME; /* wl18xx uses the same firmware for PLT */ wl->plt_fw_name = WL18XX_FW_NAME; - wl->quirks |= WLCORE_QUIRK_NO_ELP | - WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | + wl->quirks |= WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | WLCORE_QUIRK_TX_PAD_LAST_FRAME | diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index 68828b4adc06..5c6f11e157d9 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -577,9 +577,6 @@ int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif) /* Configure for power according to debugfs */ if (sta_auth != WL1271_PSM_ILLEGAL) ret = wl1271_acx_sleep_auth(wl, sta_auth); - /* Configure for power always on */ - else if (wl->quirks & WLCORE_QUIRK_NO_ELP) - ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); /* Configure for ELP power saving */ else ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index a163b0900b77..1b42cb3d472a 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2482,9 +2482,6 @@ deinit: /* Configure for power according to debugfs */ if (sta_auth != WL1271_PSM_ILLEGAL) wl1271_acx_sleep_auth(wl, sta_auth); - /* Configure for power always on */ - else if (wl->quirks & WLCORE_QUIRK_NO_ELP) - wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); /* Configure for ELP power saving */ else wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP); diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index d90436dc9c0d..5aa8b3f60005 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -515,9 +515,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip, /* Older firmwares use an old NVS format */ #define WLCORE_QUIRK_LEGACY_NVS BIT(5) -/* Some firmwares may not support ELP */ -#define WLCORE_QUIRK_NO_ELP BIT(6) - /* pad only the last frame in the aggregate buffer */ #define WLCORE_QUIRK_TX_PAD_LAST_FRAME BIT(7) -- cgit v1.2.3 From 0330ee1f5bb65bd2fd3c4b3980f4ba999405a153 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 27 Nov 2012 08:44:49 +0200 Subject: wl18xx: declare support for greenfield ht_cap The 18xx fw supports greenfield so add the IEEE80211_HT_CAP_GRN_FLD flag to the supported ht capabilities flags. Signed-off-by: Eliad Peller Signed-off-by: Ido Reis Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 4621d67cfe2d..f6c2bac9f640 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1426,7 +1426,8 @@ static struct wlcore_ops wl18xx_ops = { /* HT cap appropriate for wide channels in 2Ghz */ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = { .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | - IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40, + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40 | + IEEE80211_HT_CAP_GRN_FLD, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, @@ -1440,7 +1441,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = { /* HT cap appropriate for wide channels in 5Ghz */ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = { .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | - IEEE80211_HT_CAP_SUP_WIDTH_20_40, + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, @@ -1453,7 +1455,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = { /* HT cap appropriate for SISO 20 */ static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = { - .cap = IEEE80211_HT_CAP_SGI_20, + .cap = IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_GRN_FLD, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, @@ -1466,7 +1469,8 @@ static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = { /* HT cap appropriate for MIMO rates in 20mhz channel */ static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = { - .cap = IEEE80211_HT_CAP_SGI_20, + .cap = IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_GRN_FLD, .ht_supported = true, .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, -- cgit v1.2.3 From 0e81047996fdde7fc9e8a1c01d532df1f53586fa Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 27 Nov 2012 08:45:00 +0200 Subject: wlcore: improved Tx scheduling algorithm Prioritize EDCA by choosing the AC before anything else. Use the fast/slow link bitmap in FW to improve the scheduling algorithm for the multi-link scenario. Set packet thresholds to determine if a given link is high or low priority according to its speed. A slow link will be given high priority if the amount of packets queued for it in the FW is lower than the slow-threshold. Similarly, a fast link will be given high priority if the number of its packets queued in FW is smaller than the high-threshold. The improved algorithm: 1. Choose optimal AC according to FW utilization 2. Traversing the VIFs in a round-robin fashion, try to choose a high priority link. Links are traversed in a round-robin fashion inside a VIF. 3. If no high priority links are found, choose the first non-empty (low priority) link found in the round robin. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 2 + drivers/net/wireless/ti/wl18xx/main.c | 2 + drivers/net/wireless/ti/wlcore/conf.h | 14 +++- drivers/net/wireless/ti/wlcore/main.c | 4 +- drivers/net/wireless/ti/wlcore/tx.c | 124 +++++++++++++++++++++++--------- drivers/net/wireless/ti/wlcore/wlcore.h | 3 + 6 files changed, 112 insertions(+), 37 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index d22b52f90d42..64dffafa35fb 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -210,6 +210,8 @@ static struct wlcore_conf wl12xx_conf = { .tmpl_short_retry_limit = 10, .tmpl_long_retry_limit = 10, .tx_watchdog_timeout = 5000, + .slow_link_thold = 3, + .fast_link_thold = 10, }, .conn = { .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index f6c2bac9f640..a5119d3d5e70 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -337,6 +337,8 @@ static struct wlcore_conf wl18xx_conf = { .tmpl_short_retry_limit = 10, .tmpl_long_retry_limit = 10, .tx_watchdog_timeout = 5000, + .slow_link_thold = 3, + .fast_link_thold = 30, }, .conn = { .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index 1bd831c9e843..552ac8182475 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -677,6 +677,18 @@ struct conf_tx_settings { /* Time in ms for Tx watchdog timer to expire */ u32 tx_watchdog_timeout; + + /* + * when a slow link has this much packets pending, it becomes a low + * priority link, scheduling-wise + */ + u8 slow_link_thold; + + /* + * when a fast link has this much packets pending, it becomes a low + * priority link, scheduling-wise + */ + u8 fast_link_thold; } __packed; enum { @@ -1281,7 +1293,7 @@ struct conf_recovery_settings { * version, the two LSB are the lower driver's private conf * version. */ -#define WLCORE_CONF_VERSION (0x0004 << 16) +#define WLCORE_CONF_VERSION (0x0005 << 16) #define WLCORE_CONF_MASK 0xffff0000 #define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ sizeof(struct wlcore_conf)) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 33a9559f4d84..486b7fa0259c 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -362,8 +362,6 @@ static void wl12xx_irq_update_links_status(struct wl1271 *wl, u32 cur_fw_ps_map; u8 hlid; - /* TODO: also use link_fast_bitmap here */ - cur_fw_ps_map = le32_to_cpu(status->link_ps_bitmap); if (wl->ap_fw_ps_map != cur_fw_ps_map) { wl1271_debug(DEBUG_PSM, @@ -479,6 +477,8 @@ static int wlcore_fw_status(struct wl1271 *wl, wl->time_offset = (timespec_to_ns(&ts) >> 10) - (s64)le32_to_cpu(status_2->fw_localtime); + wl->fw_fast_lnk_map = le32_to_cpu(status_2->link_fast_bitmap); + return 0; } diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 076983b05b4d..fbda3cbca7e7 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -467,8 +467,7 @@ void wl1271_handle_tx_low_watermark(struct wl1271 *wl) } } -static struct sk_buff_head *wl1271_select_queue(struct wl1271 *wl, - struct sk_buff_head *queues) +static int wlcore_select_ac(struct wl1271 *wl) { int i, q = -1, ac; u32 min_pkts = 0xffffffff; @@ -482,33 +481,24 @@ static struct sk_buff_head *wl1271_select_queue(struct wl1271 *wl, */ for (i = 0; i < NUM_TX_QUEUES; i++) { ac = wl1271_tx_get_queue(i); - if (!skb_queue_empty(&queues[ac]) && - (wl->tx_allocated_pkts[ac] < min_pkts)) { + if (wl->tx_queue_count[ac] && + wl->tx_allocated_pkts[ac] < min_pkts) { q = ac; min_pkts = wl->tx_allocated_pkts[q]; } } - if (q == -1) - return NULL; - - return &queues[q]; + return q; } -static struct sk_buff *wl12xx_lnk_skb_dequeue(struct wl1271 *wl, - struct wl1271_link *lnk) +static struct sk_buff *wlcore_lnk_dequeue(struct wl1271 *wl, + struct wl1271_link *lnk, u8 q) { struct sk_buff *skb; unsigned long flags; - struct sk_buff_head *queue; - queue = wl1271_select_queue(wl, lnk->tx_queue); - if (!queue) - return NULL; - - skb = skb_dequeue(queue); + skb = skb_dequeue(&lnk->tx_queue[q]); if (skb) { - int q = wl1271_tx_get_queue(skb_get_queue_mapping(skb)); spin_lock_irqsave(&wl->wl_lock, flags); WARN_ON_ONCE(wl->tx_queue_count[q] <= 0); wl->tx_queue_count[q]--; @@ -522,9 +512,41 @@ static struct sk_buff *wl12xx_lnk_skb_dequeue(struct wl1271 *wl, return skb; } -static struct sk_buff *wl12xx_vif_skb_dequeue(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - u8 *hlid) +static bool wlcore_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + + if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + thold = wl->conf.tx.fast_link_thold; + else + thold = wl->conf.tx.slow_link_thold; + + return lnk->allocated_pkts < thold; +} + +static struct sk_buff *wlcore_lnk_dequeue_high_prio(struct wl1271 *wl, + u8 hlid, u8 ac, + u8 *low_prio_hlid) +{ + struct wl1271_link *lnk = &wl->links[hlid]; + + if (!wlcore_lnk_high_prio(wl, hlid, lnk)) { + if (*low_prio_hlid == WL12XX_INVALID_LINK_ID && + !skb_queue_empty(&lnk->tx_queue[ac])) + /* we found the first non-empty low priority queue */ + *low_prio_hlid = hlid; + + return NULL; + } + + return wlcore_lnk_dequeue(wl, lnk, ac); +} + +static struct sk_buff *wlcore_vif_dequeue_high_prio(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + u8 ac, u8 *hlid, + u8 *low_prio_hlid) { struct sk_buff *skb = NULL; int i, h, start_hlid; @@ -540,7 +562,8 @@ static struct sk_buff *wl12xx_vif_skb_dequeue(struct wl1271 *wl, if (!test_bit(h, wlvif->links_map)) continue; - skb = wl12xx_lnk_skb_dequeue(wl, &wl->links[h]); + skb = wlcore_lnk_dequeue_high_prio(wl, h, ac, + low_prio_hlid); if (!skb) continue; @@ -560,42 +583,74 @@ static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl, u8 *hlid) unsigned long flags; struct wl12xx_vif *wlvif = wl->last_wlvif; struct sk_buff *skb = NULL; + int ac; + u8 low_prio_hlid = WL12XX_INVALID_LINK_ID; + + ac = wlcore_select_ac(wl); + if (ac < 0) + goto out; /* continue from last wlvif (round robin) */ if (wlvif) { wl12xx_for_each_wlvif_continue(wl, wlvif) { - skb = wl12xx_vif_skb_dequeue(wl, wlvif, hlid); - if (skb) { - wl->last_wlvif = wlvif; - break; - } + if (!wlvif->tx_queue_count[ac]) + continue; + + skb = wlcore_vif_dequeue_high_prio(wl, wlvif, ac, hlid, + &low_prio_hlid); + if (!skb) + continue; + + wl->last_wlvif = wlvif; + break; } } /* dequeue from the system HLID before the restarting wlvif list */ if (!skb) { - skb = wl12xx_lnk_skb_dequeue(wl, &wl->links[wl->system_hlid]); - *hlid = wl->system_hlid; + skb = wlcore_lnk_dequeue_high_prio(wl, wl->system_hlid, + ac, &low_prio_hlid); + if (skb) { + *hlid = wl->system_hlid; + wl->last_wlvif = NULL; + } } - /* do a new pass over the wlvif list */ + /* Do a new pass over the wlvif list. But no need to continue + * after last_wlvif. The previous pass should have found it. */ if (!skb) { wl12xx_for_each_wlvif(wl, wlvif) { - skb = wl12xx_vif_skb_dequeue(wl, wlvif, hlid); + if (!wlvif->tx_queue_count[ac]) + goto next; + + skb = wlcore_vif_dequeue_high_prio(wl, wlvif, ac, hlid, + &low_prio_hlid); if (skb) { wl->last_wlvif = wlvif; break; } - /* - * No need to continue after last_wlvif. The previous - * pass should have found it. - */ +next: if (wlvif == wl->last_wlvif) break; } } + /* no high priority skbs found - but maybe a low priority one? */ + if (!skb && low_prio_hlid != WL12XX_INVALID_LINK_ID) { + struct wl1271_link *lnk = &wl->links[low_prio_hlid]; + skb = wlcore_lnk_dequeue(wl, lnk, ac); + + WARN_ON(!skb); /* we checked this before */ + *hlid = low_prio_hlid; + + /* ensure proper round robin in the vif/link levels */ + wl->last_wlvif = lnk->wlvif; + if (lnk->wlvif) + lnk->wlvif->last_tx_hlid = low_prio_hlid; + + } + if (!skb && test_and_clear_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags)) { int q; @@ -609,6 +664,7 @@ static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl, u8 *hlid) spin_unlock_irqrestore(&wl->wl_lock, flags); } +out: return skb; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 8703ae976081..e8245f36a67e 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -361,6 +361,9 @@ struct wl1271 { */ struct wl1271_link links[WL12XX_MAX_LINKS]; + /* Fast/slow links bitmap according to FW */ + u32 fw_fast_lnk_map; + /* AP-mode - a bitmap of links currently in PS mode according to FW */ u32 ap_fw_ps_map; -- cgit v1.2.3 From 4d703847617fa053689b119e43122088c81ef86d Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Fri, 30 Nov 2012 00:46:48 +0200 Subject: wl18xx: set last Tx rate from FW status Obtain the last Tx rate from the FW status and translate it to the mac80211 rate+flag format before sending it up via the Tx status. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/tx.c | 54 ++++++++++++++++++++++++++--- drivers/net/wireless/ti/wlcore/conf.h | 57 +++++++++++++++++++++++-------- drivers/net/wireless/ti/wlcore/wlcore_i.h | 5 ++- 3 files changed, 96 insertions(+), 20 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/tx.c b/drivers/net/wireless/ti/wl18xx/tx.c index 5b1fb10d9fd7..57c694396647 100644 --- a/drivers/net/wireless/ti/wl18xx/tx.c +++ b/drivers/net/wireless/ti/wl18xx/tx.c @@ -28,6 +28,49 @@ #include "wl18xx.h" #include "tx.h" +static +void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif, + struct ieee80211_tx_rate *rate) +{ + u8 fw_rate = wl->fw_status_2->counters.tx_last_rate; + + if (fw_rate > CONF_HW_RATE_INDEX_MAX) { + wl1271_error("last Tx rate invalid: %d", fw_rate); + rate->idx = 0; + rate->flags = 0; + return; + } + + if (fw_rate <= CONF_HW_RATE_INDEX_54MBPS) { + rate->idx = fw_rate; + rate->flags = 0; + } else { + rate->flags = IEEE80211_TX_RC_MCS; + rate->idx = fw_rate - CONF_HW_RATE_INDEX_MCS0; + + /* SGI modifier is counted as a separate rate */ + if (fw_rate >= CONF_HW_RATE_INDEX_MCS7_SGI) + (rate->idx)--; + if (fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI) + (rate->idx)--; + + /* this also covers the 40Mhz SGI case (= MCS15) */ + if (fw_rate == CONF_HW_RATE_INDEX_MCS7_SGI || + fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI) + rate->flags |= IEEE80211_TX_RC_SHORT_GI; + + if (fw_rate > CONF_HW_RATE_INDEX_MCS7_SGI && vif) { + struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + /* adjustment needed for range 0-7 */ + rate->idx -= 8; + rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + } + } + } +} + static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte) { struct ieee80211_tx_info *info; @@ -44,7 +87,6 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte) /* a zero bit indicates Tx success */ tx_success = !(tx_stat_byte & BIT(WL18XX_TX_STATUS_STAT_BIT_IDX)); - skb = wl->tx_frames[id]; info = IEEE80211_SKB_CB(skb); @@ -56,11 +98,13 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte) /* update the TX status info */ if (tx_success && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) info->flags |= IEEE80211_TX_STAT_ACK; + /* + * first pass info->control.vif while it's valid, and then fill out + * the info->status structures + */ + wl18xx_get_last_tx_rate(wl, info->control.vif, &info->status.rates[0]); - /* no real data about Tx completion */ - info->status.rates[0].idx = -1; - info->status.rates[0].count = 0; - info->status.rates[0].flags = 0; + info->status.rates[0].count = 1; /* no data about retries */ info->status.ack_signal = -1; if (!tx_success) diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index 552ac8182475..fd173b9ca46a 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -57,20 +57,49 @@ enum { }; enum { - CONF_HW_RATE_INDEX_1MBPS = 0, - CONF_HW_RATE_INDEX_2MBPS = 1, - CONF_HW_RATE_INDEX_5_5MBPS = 2, - CONF_HW_RATE_INDEX_6MBPS = 3, - CONF_HW_RATE_INDEX_9MBPS = 4, - CONF_HW_RATE_INDEX_11MBPS = 5, - CONF_HW_RATE_INDEX_12MBPS = 6, - CONF_HW_RATE_INDEX_18MBPS = 7, - CONF_HW_RATE_INDEX_22MBPS = 8, - CONF_HW_RATE_INDEX_24MBPS = 9, - CONF_HW_RATE_INDEX_36MBPS = 10, - CONF_HW_RATE_INDEX_48MBPS = 11, - CONF_HW_RATE_INDEX_54MBPS = 12, - CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, + CONF_HW_RATE_INDEX_1MBPS = 0, + CONF_HW_RATE_INDEX_2MBPS = 1, + CONF_HW_RATE_INDEX_5_5MBPS = 2, + CONF_HW_RATE_INDEX_11MBPS = 3, + CONF_HW_RATE_INDEX_6MBPS = 4, + CONF_HW_RATE_INDEX_9MBPS = 5, + CONF_HW_RATE_INDEX_12MBPS = 6, + CONF_HW_RATE_INDEX_18MBPS = 7, + CONF_HW_RATE_INDEX_24MBPS = 8, + CONF_HW_RATE_INDEX_36MBPS = 9, + CONF_HW_RATE_INDEX_48MBPS = 10, + CONF_HW_RATE_INDEX_54MBPS = 11, + CONF_HW_RATE_INDEX_MCS0 = 12, + CONF_HW_RATE_INDEX_MCS1 = 13, + CONF_HW_RATE_INDEX_MCS2 = 14, + CONF_HW_RATE_INDEX_MCS3 = 15, + CONF_HW_RATE_INDEX_MCS4 = 16, + CONF_HW_RATE_INDEX_MCS5 = 17, + CONF_HW_RATE_INDEX_MCS6 = 18, + CONF_HW_RATE_INDEX_MCS7 = 19, + CONF_HW_RATE_INDEX_MCS7_SGI = 20, + CONF_HW_RATE_INDEX_MCS0_40MHZ = 21, + CONF_HW_RATE_INDEX_MCS1_40MHZ = 22, + CONF_HW_RATE_INDEX_MCS2_40MHZ = 23, + CONF_HW_RATE_INDEX_MCS3_40MHZ = 24, + CONF_HW_RATE_INDEX_MCS4_40MHZ = 25, + CONF_HW_RATE_INDEX_MCS5_40MHZ = 26, + CONF_HW_RATE_INDEX_MCS6_40MHZ = 27, + CONF_HW_RATE_INDEX_MCS7_40MHZ = 28, + CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI = 29, + + /* MCS8+ rates overlap with 40Mhz rates */ + CONF_HW_RATE_INDEX_MCS8 = 21, + CONF_HW_RATE_INDEX_MCS9 = 22, + CONF_HW_RATE_INDEX_MCS10 = 23, + CONF_HW_RATE_INDEX_MCS11 = 24, + CONF_HW_RATE_INDEX_MCS12 = 25, + CONF_HW_RATE_INDEX_MCS13 = 26, + CONF_HW_RATE_INDEX_MCS14 = 27, + CONF_HW_RATE_INDEX_MCS15 = 28, + CONF_HW_RATE_INDEX_MCS15_SGI = 29, + + CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI, }; #define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 670d12f3cd50..0194f5575acf 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -130,7 +130,10 @@ struct wl_fw_packet_counters { /* Cumulative counter of released Voice memory blocks */ u8 tx_voice_released_blks; - u8 padding[3]; + /* Tx rate of the last transmitted packet */ + u8 tx_last_rate; + + u8 padding[2]; } __packed; /* FW status registers */ -- cgit v1.2.3 From 530abe195df6918d43c9381fd9a70b7e16d55036 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Wed, 28 Nov 2012 11:42:31 +0200 Subject: wlcore: add ACX_PEER_CAP command ACX_PEER_CAP command is just ACX_PEER_HT_CAP, but allows configuring the peer's support rates as well. this is needed because we start the station role when the remote rates are not known yet. the two commands should be unified in future fw versions, but for now add a new set_peer_cap per-hw op, that will use ACX_PEER_CAP for 18xx, and ACX_PEER_HT_CAP for 12xx. Signed-off-by: Eliad Peller Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 10 ++++++ drivers/net/wireless/ti/wl18xx/acx.c | 54 +++++++++++++++++++++++++++++++++ drivers/net/wireless/ti/wl18xx/acx.h | 33 ++++++++++++++++++++ drivers/net/wireless/ti/wl18xx/main.c | 9 ++++++ drivers/net/wireless/ti/wlcore/acx.c | 2 ++ drivers/net/wireless/ti/wlcore/cmd.c | 7 ++--- drivers/net/wireless/ti/wlcore/hw_ops.h | 13 ++++++++ drivers/net/wireless/ti/wlcore/main.c | 9 +++--- drivers/net/wireless/ti/wlcore/wlcore.h | 5 +++ 9 files changed, 134 insertions(+), 8 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 64dffafa35fb..8b4827f47deb 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1616,6 +1616,15 @@ static int wl12xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, return wlcore_set_key(wl, cmd, vif, sta, key_conf); } +static int wl12xx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + return wl1271_acx_set_ht_capabilities(wl, ht_cap, allow_ht_operation, + hlid); +} + static int wl12xx_setup(struct wl1271 *wl); static struct wlcore_ops wl12xx_ops = { @@ -1651,6 +1660,7 @@ static struct wlcore_ops wl12xx_ops = { .set_key = wl12xx_set_key, .channel_switch = wl12xx_cmd_channel_switch, .pre_pkt_send = NULL, + .set_peer_cap = wl12xx_set_peer_cap, }; static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c index 801d8af5cef2..a169bb5a5dbf 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.c +++ b/drivers/net/wireless/ti/wl18xx/acx.c @@ -140,3 +140,57 @@ out: return ret; } + +/* + * this command is basically the same as wl1271_acx_ht_capabilities, + * with the addition of supported rates. they should be unified in + * the next fw api change + */ +int wl18xx_acx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + struct wlcore_acx_peer_cap *acx; + int ret = 0; + u32 ht_capabilites = 0; + + wl1271_debug(DEBUG_ACX, + "acx set cap ht_supp: %d ht_cap: %d rates: 0x%x", + ht_cap->ht_supported, ht_cap->cap, rate_set); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + if (allow_ht_operation && ht_cap->ht_supported) { + /* no need to translate capabilities - use the spec values */ + ht_capabilites = ht_cap->cap; + + /* + * this bit is not employed by the spec but only by FW to + * indicate peer HT support + */ + ht_capabilites |= WL12XX_HT_CAP_HT_OPERATION; + + /* get data from A-MPDU parameters field */ + acx->ampdu_max_length = ht_cap->ampdu_factor; + acx->ampdu_min_spacing = ht_cap->ampdu_density; + } + + acx->hlid = hlid; + acx->ht_capabilites = cpu_to_le32(ht_capabilites); + acx->supported_rates = cpu_to_le32(rate_set); + + ret = wl1271_cmd_configure(wl, ACX_PEER_CAP, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx ht capabilities setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h index b57e3483509d..0e636def1217 100644 --- a/drivers/net/wireless/ti/wl18xx/acx.h +++ b/drivers/net/wireless/ti/wl18xx/acx.h @@ -297,11 +297,44 @@ struct wlcore_peer_ht_operation_mode { u8 padding[2]; }; +/* + * ACX_PEER_CAP + * this struct is very similar to wl1271_acx_ht_capabilities, with the + * addition of supported rates + */ +struct wlcore_acx_peer_cap { + struct acx_header header; + + /* bitmask of capability bits supported by the peer */ + __le32 ht_capabilites; + + /* rates supported by the remote peer */ + __le32 supported_rates; + + /* Indicates to which link these capabilities apply. */ + u8 hlid; + + /* + * This the maximum A-MPDU length supported by the AP. The FW may not + * exceed this length when sending A-MPDUs + */ + u8 ampdu_max_length; + + /* This is the minimal spacing required when sending A-MPDUs to the AP*/ + u8 ampdu_min_spacing; + + u8 padding; +} __packed; + int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap, u32 sdio_blk_size, u32 extra_mem_blks, u32 len_field_size); int wl18xx_acx_set_checksum_state(struct wl1271 *wl); int wl18xx_acx_clear_statistics(struct wl1271 *wl); int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide); +int wl18xx_acx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid); #endif /* __WL18XX_ACX_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a5119d3d5e70..55fd46b9628d 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1386,6 +1386,14 @@ out: mutex_unlock(&wl->mutex); } +static int wl18xx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + return wl18xx_acx_set_peer_cap(wl, ht_cap, allow_ht_operation, + rate_set, hlid); +} static int wl18xx_setup(struct wl1271 *wl); @@ -1423,6 +1431,7 @@ static struct wlcore_ops wl18xx_ops = { .channel_switch = wl18xx_cmd_channel_switch, .pre_pkt_send = wl18xx_pre_pkt_send, .sta_rc_update = wl18xx_sta_rc_update, + .set_peer_cap = wl18xx_set_peer_cap, }; /* HT cap appropriate for wide channels in 2Ghz */ diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c index 9c32f0c840d7..c79654323396 100644 --- a/drivers/net/wireless/ti/wlcore/acx.c +++ b/drivers/net/wireless/ti/wlcore/acx.c @@ -1340,6 +1340,8 @@ out: kfree(acx); return ret; } +EXPORT_SYMBOL_GPL(wl1271_acx_set_ht_capabilities); + int wl1271_acx_set_ht_information(struct wl1271 *wl, struct wl12xx_vif *wlvif, diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 56432c8cda00..1fbee0d51872 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -506,11 +506,10 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) cmd->sta.hlid = wlvif->sta.hlid; cmd->sta.session = wl->session_ids[wlvif->sta.hlid]; /* - * We don't have the correct remote rates in this stage, and there - * is no way to update them later, so use our supported rates instead. - * The fw will take the configured rate policies into account anyway. + * We don't have the correct remote rates in this stage. the rates + * will be reconfigured later, after authorization. */ - cmd->sta.remote_rates = cpu_to_le32(supported_rates); + cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set); wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d " "basic_rate_set: 0x%x, remote_rates: 0x%x", diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h index 0e0b6563a3ff..4db03e14acf7 100644 --- a/drivers/net/wireless/ti/wlcore/hw_ops.h +++ b/drivers/net/wireless/ti/wlcore/hw_ops.h @@ -209,4 +209,17 @@ wlcore_hw_sta_rc_update(struct wl1271 *wl, struct wl12xx_vif *wlvif, wl->ops->sta_rc_update(wl, wlvif, sta, changed); } +static inline int +wlcore_hw_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + if (wl->ops->set_peer_cap) + return wl->ops->set_peer_cap(wl, ht_cap, allow_ht_operation, + rate_set, hlid); + + return 0; +} + #endif diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 486b7fa0259c..fed227c88a8a 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4132,10 +4132,11 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, bool enabled = bss_conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT; - ret = wl1271_acx_set_ht_capabilities(wl, - &sta_ht_cap, - enabled, - wlvif->sta.hlid); + ret = wlcore_hw_set_peer_cap(wl, + &sta_ht_cap, + enabled, + wlvif->rate_set, + wlvif->sta.hlid); if (ret < 0) { wl1271_warning("Set ht cap failed %d", ret); goto out; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index e8245f36a67e..a4441164bb4b 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -106,6 +106,11 @@ struct wlcore_ops { u32 (*pre_pkt_send)(struct wl1271 *wl, u32 buf_offset, u32 last_len); void (*sta_rc_update)(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_sta *sta, u32 changed); + int (*set_peer_cap)(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid); + }; enum wlcore_partitions { -- cgit v1.2.3 From 5d3a160365306c4161b7064d482c26a85829f170 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Sat, 8 Dec 2012 02:58:23 +0200 Subject: wlcore: increase scan dwell times if no activity There's a limit on scan dwell times of max 30ms in order to avoid degrading voip traffic which could be going on while scanning. However these dwell times increase the chance of missing out on nearby APs leading to partial scan results. Allow configuration of longer dwell times in case there no active interface (i.e. no STA associated or AP up). [Arik - count started vifs using an in-driver function] [Fixed some new checkpatch warnings regarding comments in the networking subsystem. -- Luca] Signed-off-by: Eyal Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 2 ++ drivers/net/wireless/ti/wl18xx/main.c | 2 ++ drivers/net/wireless/ti/wlcore/conf.h | 22 ++++++++++++++++++++++ drivers/net/wireless/ti/wlcore/scan.c | 30 +++++++++++++++++++++++++++--- 4 files changed, 53 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 8b4827f47deb..08b67625f7ff 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -269,6 +269,8 @@ static struct wlcore_conf wl12xx_conf = { .scan = { .min_dwell_time_active = 7500, .max_dwell_time_active = 30000, + .min_dwell_time_active_long = 25000, + .max_dwell_time_active_long = 50000, .dwell_time_passive = 100000, .dwell_time_dfs = 150000, .num_probe_reqs = 2, diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 55fd46b9628d..62f431a2ed34 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -396,6 +396,8 @@ static struct wlcore_conf wl18xx_conf = { .scan = { .min_dwell_time_active = 7500, .max_dwell_time_active = 30000, + .min_dwell_time_active_long = 25000, + .max_dwell_time_active_long = 50000, .dwell_time_passive = 100000, .dwell_time_dfs = 150000, .num_probe_reqs = 2, diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index fd173b9ca46a..2b96ff821341 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -1088,6 +1088,7 @@ struct conf_roam_trigger_settings { struct conf_scan_settings { /* * The minimum time to wait on each channel for active scans + * This value will be used whenever there's a connected interface. * * Range: u32 tu/1000 */ @@ -1095,11 +1096,32 @@ struct conf_scan_settings { /* * The maximum time to wait on each channel for active scans + * This value will be currently used whenever there's a + * connected interface. It shouldn't exceed 30000 (~30ms) to avoid + * possible interference of voip traffic going on while scanning. * * Range: u32 tu/1000 */ u32 max_dwell_time_active; + /* The minimum time to wait on each channel for active scans + * when it's possible to have longer scan dwell times. + * Currently this is used whenever we're idle on all interfaces. + * Longer dwell times improve detection of networks within a + * single scan. + * + * Range: u32 tu/1000 + */ + u32 min_dwell_time_active_long; + + /* The maximum time to wait on each channel for active scans + * when it's possible to have longer scan dwell times. + * See min_dwell_time_active_long + * + * Range: u32 tu/1000 + */ + u32 max_dwell_time_active_long; + /* time to wait on the channel for passive scans (in TU/1000) */ u32 dwell_time_passive; diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 7f42f8a4d90b..6cfdeaea12f0 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -89,6 +89,25 @@ out: } +static void wlcore_started_vifs_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + int *count = (int *)data; + + if (!vif->bss_conf.idle) + (*count)++; +} + +static int wlcore_count_started_vifs(struct wl1271 *wl) +{ + int count = 0; + + ieee80211_iterate_active_interfaces_atomic(wl->hw, + IEEE80211_IFACE_ITER_RESUME_ALL, + wlcore_started_vifs_iter, &count); + return count; +} + static int wlcore_scan_get_channels(struct wl1271 *wl, struct ieee80211_channel *req_channels[], @@ -109,9 +128,14 @@ wlcore_scan_get_channels(struct wl1271 *wl, /* configure dwell times according to scan type */ if (scan_type == SCAN_TYPE_SEARCH) { struct conf_scan_settings *c = &wl->conf.scan; - - min_dwell_time_active = c->min_dwell_time_active; - max_dwell_time_active = c->max_dwell_time_active; + bool active_vif_exists = !!wlcore_count_started_vifs(wl); + + min_dwell_time_active = active_vif_exists ? + c->min_dwell_time_active : + c->min_dwell_time_active_long; + max_dwell_time_active = active_vif_exists ? + c->max_dwell_time_active : + c->max_dwell_time_active_long; dwell_time_passive = c->dwell_time_passive; dwell_time_dfs = c->dwell_time_dfs; } else { -- cgit v1.2.3 From c23280eb1436edd30814e5e40e4c46ae4cdb3cf4 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:36 +0200 Subject: wlcore: set 5Ghz probe-req template for DFS channels Even passive scans on DFS channels require us to send probe requests, so configure the probe-req in this case. Also use this opportunity to prevent the code from crashing in case no SSIDs are sent from above. This will likely happen in the DFS case introduced. Even a passive scan might need the probe request configured because of DFS channels. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/scan.c | 52 +++++++++++++++++------------------ 1 file changed, 26 insertions(+), 26 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index daaebad78e1c..1df88d5336f3 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -108,27 +108,27 @@ static int wl18xx_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, if (cmd->active[0]) { u8 band = IEEE80211_BAND_2GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - req->ie, - req->ie_len, - false); + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + req->ie, + req->ie_len, + false); if (ret < 0) { wl1271_error("2.4GHz PROBE request template failed"); goto out; } } - if (cmd->active[1]) { + if (cmd->active[1] || cmd->dfs) { u8 band = IEEE80211_BAND_5GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - req->ie, - req->ie_len, - false); + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + req->ie, + req->ie_len, + false); if (ret < 0) { wl1271_error("5GHz PROBE request template failed"); goto out; @@ -230,27 +230,27 @@ int wl18xx_scan_sched_scan_config(struct wl1271 *wl, if (cmd->active[0]) { u8 band = IEEE80211_BAND_2GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - ies->ie[band], - ies->len[band], - true); + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + ies->ie[band], + ies->len[band], + true); if (ret < 0) { wl1271_error("2.4GHz PROBE request template failed"); goto out; } } - if (cmd->active[1]) { + if (cmd->active[1] || cmd->dfs) { u8 band = IEEE80211_BAND_5GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, - cmd->role_id, band, - req->ssids[0].ssid, - req->ssids[0].ssid_len, - ies->ie[band], - ies->len[band], - true); + cmd->role_id, band, + req->ssids ? req->ssids[0].ssid : NULL, + req->ssids ? req->ssids[0].ssid_len : 0, + ies->ie[band], + ies->len[band], + true); if (ret < 0) { wl1271_error("5GHz PROBE request template failed"); goto out; -- cgit v1.2.3 From c91ec5f3ada86807ea4857fc5793a4efe99c9de3 Mon Sep 17 00:00:00 2001 From: Yair Shapira Date: Wed, 28 Nov 2012 11:42:39 +0200 Subject: wl18xx: fix a bug in wl->num_rx_desc initialization wl->num_rx_desc was mistakenly initialized with WL18XX_NUM_TX_DESCRIPTORS but it should use WL18XX_NUM_RX_DESCRIPTORS instead. This bug was passed unnoticed because currently both RX and TX descriptors are initialized to the same value (32). Signed-off-by: Yair Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 62f431a2ed34..a35eba2b8d8b 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1501,7 +1501,7 @@ static int wl18xx_setup(struct wl1271 *wl) wl->rtable = wl18xx_rtable; wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; - wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS; + wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS; wl->num_channels = 2; wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES; wl->band_rate_to_idx = wl18xx_band_rate_to_idx; -- cgit v1.2.3 From f1626fd8983a5bc68ce2879865cce297eb96c0b4 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:40 +0200 Subject: wlcore/wl18xx: change priority calculations for links Update the 18xx FW status private part to include Tx related link priorities. Introduce new HW ops to determine link priority per chip family. For 18xx the changes are: - Suspended links are at most low priority and Tx for them is stopped beyond the suspend threshold. - Active links now get their thresholds directly from FW - There's a new "stop" threshold for active links, at which point a link stops receiving new packets. Update the min 18xx FW version required to make sure suspended links bitmap is advertised by the FW. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/main.c | 22 ++++++++++++++++++ drivers/net/wireless/ti/wl18xx/main.c | 41 +++++++++++++++++++++++++++++++++ drivers/net/wireless/ti/wl18xx/wl18xx.h | 38 +++++++++++++++++++++++++++++- drivers/net/wireless/ti/wlcore/hw_ops.h | 20 ++++++++++++++++ drivers/net/wireless/ti/wlcore/tx.c | 18 +++------------ drivers/net/wireless/ti/wlcore/wlcore.h | 5 +++- 6 files changed, 127 insertions(+), 17 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 08b67625f7ff..6d4a02171abc 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1627,6 +1627,26 @@ static int wl12xx_set_peer_cap(struct wl1271 *wl, hlid); } +static bool wl12xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + + if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + thold = wl->conf.tx.fast_link_thold; + else + thold = wl->conf.tx.slow_link_thold; + + return lnk->allocated_pkts < thold; +} + +static bool wl12xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + /* any link is good for low priority */ + return true; +} + static int wl12xx_setup(struct wl1271 *wl); static struct wlcore_ops wl12xx_ops = { @@ -1663,6 +1683,8 @@ static struct wlcore_ops wl12xx_ops = { .channel_switch = wl12xx_cmd_channel_switch, .pre_pkt_send = NULL, .set_peer_cap = wl12xx_set_peer_cap, + .lnk_high_prio = wl12xx_lnk_high_prio, + .lnk_low_prio = wl12xx_lnk_low_prio, }; static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a35eba2b8d8b..ed34a7f3391c 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1397,6 +1397,45 @@ static int wl18xx_set_peer_cap(struct wl1271 *wl, rate_set, hlid); } +static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + struct wl18xx_fw_status_priv *status_priv = + (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv; + u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap); + + /* suspended links are never high priority */ + if (test_bit(hlid, (unsigned long *)&suspend_bitmap)) + return false; + + /* the priority thresholds are taken from FW */ + if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + thold = status_priv->tx_fast_link_prio_threshold; + else + thold = status_priv->tx_slow_link_prio_threshold; + + return lnk->allocated_pkts < thold; +} + +static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + struct wl18xx_fw_status_priv *status_priv = + (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv; + u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap); + + if (test_bit(hlid, (unsigned long *)&suspend_bitmap)) + thold = status_priv->tx_suspend_threshold; + else if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + thold = status_priv->tx_fast_stop_threshold; + else + thold = status_priv->tx_slow_stop_threshold; + + return lnk->allocated_pkts < thold; +} + static int wl18xx_setup(struct wl1271 *wl); static struct wlcore_ops wl18xx_ops = { @@ -1434,6 +1473,8 @@ static struct wlcore_ops wl18xx_ops = { .pre_pkt_send = wl18xx_pre_pkt_send, .sta_rc_update = wl18xx_sta_rc_update, .set_peer_cap = wl18xx_set_peer_cap, + .lnk_high_prio = wl18xx_lnk_high_prio, + .lnk_low_prio = wl18xx_lnk_low_prio, }; /* HT cap appropriate for wide channels in 2Ghz */ diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index 3105fbf79ae4..e6ea78c7da36 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -68,7 +68,43 @@ struct wl18xx_fw_status_priv { */ u8 released_tx_desc[WL18XX_FW_MAX_TX_STATUS_DESC]; - u8 padding[2]; + /* A bitmap representing the currently suspended links. The suspend + * is short lived, for multi-channel Tx requirements. + */ + __le32 link_suspend_bitmap; + + /* packet threshold for an "almost empty" AC, + * for Tx schedulng purposes + */ + u8 tx_ac_threshold; + + /* number of packets to queue up for a link in PS */ + u8 tx_ps_threshold; + + /* number of packet to queue up for a suspended link */ + u8 tx_suspend_threshold; + + /* Should have less than this number of packets in queue of a slow + * link to qualify as high priority link + */ + u8 tx_slow_link_prio_threshold; + + /* Should have less than this number of packets in queue of a fast + * link to qualify as high priority link + */ + u8 tx_fast_link_prio_threshold; + + /* Should have less than this number of packets in queue of a slow + * link before we stop queuing up packets for it. + */ + u8 tx_slow_stop_threshold; + + /* Should have less than this number of packets in queue of a fast + * link before we stop queuing up packets for it. + */ + u8 tx_fast_stop_threshold; + + u8 padding[3]; }; #define WL18XX_PHY_VERSION_MAX_LEN 20 diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h index 4db03e14acf7..7fd260c02a0a 100644 --- a/drivers/net/wireless/ti/wlcore/hw_ops.h +++ b/drivers/net/wireless/ti/wlcore/hw_ops.h @@ -222,4 +222,24 @@ wlcore_hw_set_peer_cap(struct wl1271 *wl, return 0; } +static inline bool +wlcore_hw_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + if (!wl->ops->lnk_high_prio) + BUG_ON(1); + + return wl->ops->lnk_high_prio(wl, hlid, lnk); +} + +static inline bool +wlcore_hw_lnk_low_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + if (!wl->ops->lnk_low_prio) + BUG_ON(1); + + return wl->ops->lnk_low_prio(wl, hlid, lnk); +} + #endif diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 8f5ea89b03b1..25cfd35ab1a2 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -509,28 +509,16 @@ static struct sk_buff *wlcore_lnk_dequeue(struct wl1271 *wl, return skb; } -static bool wlcore_lnk_high_prio(struct wl1271 *wl, u8 hlid, - struct wl1271_link *lnk) -{ - u8 thold; - - if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) - thold = wl->conf.tx.fast_link_thold; - else - thold = wl->conf.tx.slow_link_thold; - - return lnk->allocated_pkts < thold; -} - static struct sk_buff *wlcore_lnk_dequeue_high_prio(struct wl1271 *wl, u8 hlid, u8 ac, u8 *low_prio_hlid) { struct wl1271_link *lnk = &wl->links[hlid]; - if (!wlcore_lnk_high_prio(wl, hlid, lnk)) { + if (!wlcore_hw_lnk_high_prio(wl, hlid, lnk)) { if (*low_prio_hlid == WL12XX_INVALID_LINK_ID && - !skb_queue_empty(&lnk->tx_queue[ac])) + !skb_queue_empty(&lnk->tx_queue[ac]) && + wlcore_hw_lnk_low_prio(wl, hlid, lnk)) /* we found the first non-empty low priority queue */ *low_prio_hlid = hlid; diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index a4441164bb4b..58e52505ec17 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -110,7 +110,10 @@ struct wlcore_ops { struct ieee80211_sta_ht_cap *ht_cap, bool allow_ht_operation, u32 rate_set, u8 hlid); - + bool (*lnk_high_prio)(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk); + bool (*lnk_low_prio)(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk); }; enum wlcore_partitions { -- cgit v1.2.3 From 98323895c021ff010685ba77773af876eff503a5 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:41 +0200 Subject: wl18xx: limit Tx for the AP single-STA-in-PSM case Treat a single connected STA in PSM as a slow link and regulate Tx speed according to slow link priority/stop thresholds. This allows us to avoid flooding the FW, while delivering decent throughput to a peer in forced-PSM. [Small simplification of the if statements -- Luca] Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index ed34a7f3391c..3f6762c9b9a7 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1410,7 +1410,8 @@ static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, return false; /* the priority thresholds are taken from FW */ - if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map) && + !test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map)) thold = status_priv->tx_fast_link_prio_threshold; else thold = status_priv->tx_slow_link_prio_threshold; @@ -1428,7 +1429,8 @@ static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, if (test_bit(hlid, (unsigned long *)&suspend_bitmap)) thold = status_priv->tx_suspend_threshold; - else if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map)) + else if (test_bit(hlid, (unsigned long *)&wl->fw_fast_lnk_map) && + !test_bit(hlid, (unsigned long *)&wl->ap_fw_ps_map)) thold = status_priv->tx_fast_stop_threshold; else thold = status_priv->tx_slow_stop_threshold; -- cgit v1.2.3 From c80daad625b382fcd72ad68a5c0a26933263aa85 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:46 +0200 Subject: wl18xx: support MIMO only if HT mode is not forced to SISO Don't use MIMO rates when HT mode is forced to SISO, even if we have multiple antennas. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 3f6762c9b9a7..0ff9bc7b1f33 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1078,7 +1078,12 @@ static bool wl18xx_is_mimo_supported(struct wl1271 *wl) { struct wl18xx_priv *priv = wl->priv; - return priv->conf.phy.number_of_assembled_ant2_4 >= 2; + /* only support MIMO with multiple antennas, and when SISO + * is not forced through config + */ + return (priv->conf.phy.number_of_assembled_ant2_4 >= 2) && + (priv->conf.ht.mode != HT_MODE_WIDE) && + (priv->conf.ht.mode != HT_MODE_SISO20); } /* -- cgit v1.2.3 From 0b70078c38fd1c8d69cf52b93e8c3bdd719a2394 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Wed, 28 Nov 2012 11:42:47 +0200 Subject: wlcore: support scan reports during periodic scan FW API changed and now PERIODIC_SCAN_REPORT_EVENT is sent in case results were found at the end of each sched scan cycle. Previous FW was missing that and broke sched scan. This API change is available from 18xx FW 8.5.0.0.27 [Arik - move changes to 18xx specific files, align FW structures to latest for scan command] Signed-off-by: Eyal Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl12xx/event.c | 10 +++++++--- drivers/net/wireless/ti/wl18xx/event.c | 8 ++++++++ drivers/net/wireless/ti/wl18xx/event.h | 1 + drivers/net/wireless/ti/wl18xx/main.c | 1 + drivers/net/wireless/ti/wl18xx/scan.c | 4 ++++ drivers/net/wireless/ti/wl18xx/scan.h | 18 +++++++++++++++--- drivers/net/wireless/ti/wlcore/event.c | 10 ---------- drivers/net/wireless/ti/wlcore/event.h | 2 -- drivers/net/wireless/ti/wlcore/scan.c | 3 ++- drivers/net/wireless/ti/wlcore/scan.h | 2 +- 10 files changed, 39 insertions(+), 20 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl12xx/event.c b/drivers/net/wireless/ti/wl12xx/event.c index 6437dac12e70..6ac0ed751da8 100644 --- a/drivers/net/wireless/ti/wl12xx/event.c +++ b/drivers/net/wireless/ti/wl12xx/event.c @@ -64,9 +64,13 @@ int wl12xx_process_mailbox_events(struct wl1271 *wl) wl12xx_scan_completed(wl, wl->scan_wlvif); } - if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) - wlcore_event_sched_scan_report(wl, - mbox->scheduled_scan_status); + if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, + "PERIODIC_SCAN_REPORT_EVENT (status 0x%0x)", + mbox->scheduled_scan_status); + + wlcore_scan_sched_scan_results(wl); + } if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) wlcore_event_sched_scan_completed(wl, diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c index 02ef5aa9da6b..c9199d7804c6 100644 --- a/drivers/net/wireless/ti/wl18xx/event.c +++ b/drivers/net/wireless/ti/wl18xx/event.c @@ -61,6 +61,14 @@ int wl18xx_process_mailbox_events(struct wl1271 *wl) wl18xx_scan_completed(wl, wl->scan_wlvif); } + if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, + "PERIODIC_SCAN_REPORT_EVENT (results %d)", + mbox->number_of_sched_scan_results); + + wlcore_scan_sched_scan_results(wl); + } + if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) wlcore_event_sched_scan_completed(wl, 1); diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h index b55fd31e471a..398f3d2c0a6c 100644 --- a/drivers/net/wireless/ti/wl18xx/event.h +++ b/drivers/net/wireless/ti/wl18xx/event.h @@ -37,6 +37,7 @@ enum { BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(17), REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(18), DFS_CHANNELS_CONFIG_COMPLETE_EVENT = BIT(19), + PERIODIC_SCAN_REPORT_EVENT_ID = BIT(20), }; struct wl18xx_event_mailbox { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 0ff9bc7b1f33..ec331e9e0b74 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -890,6 +890,7 @@ static int wl18xx_boot(struct wl1271 *wl) SCAN_COMPLETE_EVENT_ID | RSSI_SNR_TRIGGER_0_EVENT_ID | PERIODIC_SCAN_COMPLETE_EVENT_ID | + PERIODIC_SCAN_REPORT_EVENT_ID | DUMMY_PACKET_EVENT_ID | PEER_REMOVE_COMPLETE_EVENT_ID | BA_SESSION_RX_CONSTRAINT_EVENT_ID | diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index 1df88d5336f3..09d944505ac0 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -227,6 +227,10 @@ int wl18xx_scan_sched_scan_config(struct wl1271 *wl, cmd->tag = WL1271_SCAN_DEFAULT_TAG; + /* create a PERIODIC_SCAN_REPORT_EVENT whenever we've got a match */ + cmd->report_threshold = 1; + cmd->terminate_on_report = 0; + if (cmd->active[0]) { u8 band = IEEE80211_BAND_2GHZ; ret = wl12xx_cmd_build_probe_req(wl, wlvif, diff --git a/drivers/net/wireless/ti/wl18xx/scan.h b/drivers/net/wireless/ti/wl18xx/scan.h index 5eb8c7fc1567..eadee42689d1 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.h +++ b/drivers/net/wireless/ti/wl18xx/scan.h @@ -78,8 +78,7 @@ struct wl18xx_cmd_scan_params { __le16 long_cycles_sec; u8 short_cycles_count; u8 total_cycles; /* 0 - infinite */ - u8 rate; - u8 padding[1]; + u8 padding[2]; union { struct { @@ -93,7 +92,20 @@ struct wl18xx_cmd_scan_params { u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ u8 tag; - u8 padding1[2]; + u8 rate; + + /* send SCAN_REPORT_EVENT in periodic scans after each cycle + * if number of results >= report_threshold. Must be 0 for + * non periodic scans + */ + u8 report_threshold; + + /* Should periodic scan stop after a report event was created. + * Must be 0 for non periodic scans. + */ + u8 terminate_on_report; + + u8 padding1[3]; } __packed; struct wl18xx_cmd_scan_stop { diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c index 2776d953b6b4..70f289aa1bc6 100644 --- a/drivers/net/wireless/ti/wlcore/event.c +++ b/drivers/net/wireless/ti/wlcore/event.c @@ -94,16 +94,6 @@ void wlcore_event_soft_gemini_sense(struct wl1271 *wl, u8 enable) } EXPORT_SYMBOL_GPL(wlcore_event_soft_gemini_sense); -void wlcore_event_sched_scan_report(struct wl1271 *wl, - u8 status) -{ - wl1271_debug(DEBUG_EVENT, "PERIODIC_SCAN_REPORT_EVENT (status 0x%0x)", - status); - - wl1271_scan_sched_scan_results(wl); -} -EXPORT_SYMBOL_GPL(wlcore_event_sched_scan_report); - void wlcore_event_sched_scan_completed(struct wl1271 *wl, u8 status) { diff --git a/drivers/net/wireless/ti/wlcore/event.h b/drivers/net/wireless/ti/wlcore/event.h index b4353be68ddb..acc7a59d3828 100644 --- a/drivers/net/wireless/ti/wlcore/event.h +++ b/drivers/net/wireless/ti/wlcore/event.h @@ -70,8 +70,6 @@ int wl1271_event_unmask(struct wl1271 *wl); int wl1271_event_handle(struct wl1271 *wl, u8 mbox); void wlcore_event_soft_gemini_sense(struct wl1271 *wl, u8 enable); -void wlcore_event_sched_scan_report(struct wl1271 *wl, - u8 status); void wlcore_event_sched_scan_completed(struct wl1271 *wl, u8 status); void wlcore_event_ba_rx_constraint(struct wl1271 *wl, diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index 6cfdeaea12f0..f407101e525b 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -460,9 +460,10 @@ out: } EXPORT_SYMBOL_GPL(wlcore_scan_sched_scan_ssid_list); -void wl1271_scan_sched_scan_results(struct wl1271 *wl) +void wlcore_scan_sched_scan_results(struct wl1271 *wl) { wl1271_debug(DEBUG_SCAN, "got periodic scan results"); ieee80211_sched_scan_results(wl->hw); } +EXPORT_SYMBOL_GPL(wlcore_scan_sched_scan_results); diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 9ae606555aeb..a6ab24b5c0f9 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -39,7 +39,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, struct cfg80211_sched_scan_request *req, struct ieee80211_sched_scan_ies *ies); int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif); -void wl1271_scan_sched_scan_results(struct wl1271 *wl); +void wlcore_scan_sched_scan_results(struct wl1271 *wl); #define WL1271_SCAN_MAX_CHANNELS 24 #define WL1271_SCAN_DEFAULT_TAG 1 -- cgit v1.2.3 From 2fd8a3bb49400a4a0fe9d9cd9d49019e7a46403e Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Nov 2012 11:42:48 +0200 Subject: wl18xx: count HW block spare based correctly on keys We have no idea how many VIFs there are requiring a special spare, we know just about the number of keys set. Rename the counter appropriately and toggle it whenever a special key is added/removed. Previously this was only changed once, since it was toggled whenever the actual spare was changed. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 56 ++++++++++++++++++--------------- drivers/net/wireless/ti/wl18xx/wl18xx.h | 4 +-- 2 files changed, 33 insertions(+), 27 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index ec331e9e0b74..6b57686c5b0d 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1021,7 +1021,7 @@ static int wl18xx_hw_init(struct wl1271 *wl) /* (re)init private structures. Relevant on recovery as well. */ priv->last_fw_rls_idx = 0; - priv->extra_spare_vif_count = 0; + priv->extra_spare_key_count = 0; /* set the default amount of spare blocks in the bitmap */ ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE); @@ -1285,8 +1285,8 @@ static int wl18xx_get_spare_blocks(struct wl1271 *wl, bool is_gem) { struct wl18xx_priv *priv = wl->priv; - /* If we have VIFs requiring extra spare, indulge them */ - if (priv->extra_spare_vif_count) + /* If we have keys requiring extra spare, indulge them */ + if (priv->extra_spare_key_count) return WL18XX_TX_HW_EXTRA_BLOCK_SPARE; return WL18XX_TX_HW_BLOCK_SPARE; @@ -1298,42 +1298,48 @@ static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_key_conf *key_conf) { struct wl18xx_priv *priv = wl->priv; - bool change_spare = false; + bool change_spare = false, special_enc; int ret; + wl1271_debug(DEBUG_CRYPT, "extra spare keys before: %d", + priv->extra_spare_key_count); + + special_enc = key_conf->cipher == WL1271_CIPHER_SUITE_GEM || + key_conf->cipher == WLAN_CIPHER_SUITE_TKIP; + + ret = wlcore_set_key(wl, cmd, vif, sta, key_conf); + if (ret < 0) + goto out; + /* - * when adding the first or removing the last GEM/TKIP interface, + * when adding the first or removing the last GEM/TKIP key, * we have to adjust the number of spare blocks. */ - change_spare = (key_conf->cipher == WL1271_CIPHER_SUITE_GEM || - key_conf->cipher == WLAN_CIPHER_SUITE_TKIP) && - ((priv->extra_spare_vif_count == 0 && cmd == SET_KEY) || - (priv->extra_spare_vif_count == 1 && cmd == DISABLE_KEY)); + if (special_enc) { + if (cmd == SET_KEY) { + /* first key */ + change_spare = (priv->extra_spare_key_count == 0); + priv->extra_spare_key_count++; + } else if (cmd == DISABLE_KEY) { + /* last key */ + change_spare = (priv->extra_spare_key_count == 1); + priv->extra_spare_key_count--; + } + } - /* no need to change spare - just regular set_key */ - if (!change_spare) - return wlcore_set_key(wl, cmd, vif, sta, key_conf); + wl1271_debug(DEBUG_CRYPT, "extra spare keys after: %d", + priv->extra_spare_key_count); - ret = wlcore_set_key(wl, cmd, vif, sta, key_conf); - if (ret < 0) + if (!change_spare) goto out; /* key is now set, change the spare blocks */ - if (cmd == SET_KEY) { + if (priv->extra_spare_key_count) ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_EXTRA_BLOCK_SPARE); - if (ret < 0) - goto out; - - priv->extra_spare_vif_count++; - } else { + else ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE); - if (ret < 0) - goto out; - - priv->extra_spare_vif_count--; - } out: return ret; diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index e6ea78c7da36..b6739e79efcf 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -49,8 +49,8 @@ struct wl18xx_priv { /* Index of last released Tx desc in FW */ u8 last_fw_rls_idx; - /* number of VIFs requiring extra spare mem-blocks */ - int extra_spare_vif_count; + /* number of keys requiring extra spare mem-blocks */ + int extra_spare_key_count; }; #define WL18XX_FW_MAX_TX_STATUS_DESC 33 -- cgit v1.2.3 From 1d6146659ef7ae10263d490a9554ff0bfc7f6ecd Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Thu, 27 Dec 2012 15:49:47 +0200 Subject: wl18xx: add new phy configuration parameters for telec support Add back-off settings to the wl18xx_mac_and_phy_params. We had an empty space where the new parameters are added, so this change doesn't affect backwards-compatibility with older firmwares. Update WL18XX_CONF_VERSION accordingly. Signed-off-by: Victor Goldenshtein Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/conf.h | 7 ++++--- drivers/net/wireless/ti/wl18xx/main.c | 5 +++++ 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h index b5f114857191..e34302e3b51d 100644 --- a/drivers/net/wireless/ti/wl18xx/conf.h +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -23,7 +23,7 @@ #define __WL18XX_CONF_H__ #define WL18XX_CONF_MAGIC 0x10e100ca -#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0005) +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0006) #define WL18XX_CONF_MASK 0x0000ffff #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ sizeof(struct wl18xx_priv_conf)) @@ -70,8 +70,9 @@ struct wl18xx_mac_and_phy_params { u8 pwr_limit_reference_11_abg; u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; u8 pwr_limit_reference_11p; - u8 spare1[9]; - u8 spare2[9]; + u8 spare1; + u8 per_chan_bo_mode_11_abg[13]; + u8 per_chan_bo_mode_11_p[4]; u8 primary_clock_setting_time; u8 clock_valid_on_wake_up; u8 secondary_clock_setting_time; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 0be1cfc17a86..a10b7a7a215a 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -547,6 +547,11 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .pwr_limit_reference_11p = 0x64, + .per_chan_bo_mode_11_abg = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00 }, + .per_chan_bo_mode_11_p = { 0x00, 0x00, 0x00, 0x00 }, .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .psat = 0, -- cgit v1.2.3 From e1a0c6b3a4b27ed5f21291d0bbee2167ec201ef5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 11:47:44 +0100 Subject: mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 For VHT, many more bandwidth changes are possible. As a first step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag in the HT capabilities and instead introduce a bandwidth field indicating the currently usable bandwidth to transmit to the station. Of course, make all drivers use it. To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get the station as an argument, rather than the new capabilities, so it can set up the new bandwidth field. If the station is a VHT station and VHT bandwidth is in use, also set the bandwidth accordingly. Doing this allows us to get rid of the supports_40mhz flag as the HT capabilities now reflect the true capability instead of the current setting. While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not ignore HT cap overrides when MCS TX isn't supported (not that it really happens...) Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath9k/rc.c | 2 +- drivers/net/wireless/iwlwifi/dvm/agn.h | 2 +- drivers/net/wireless/iwlwifi/dvm/rs.c | 6 +- drivers/net/wireless/iwlwifi/dvm/sta.c | 19 ++----- drivers/net/wireless/iwlwifi/mvm/rs.c | 24 ++------ drivers/net/wireless/rtlwifi/base.c | 7 +-- drivers/net/wireless/rtlwifi/rc.c | 5 +- drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 6 +- drivers/net/wireless/rtlwifi/rtl8192ce/trx.c | 3 +- drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 3 +- drivers/net/wireless/rtlwifi/rtl8192de/trx.c | 3 +- drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 3 +- drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 3 +- drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 3 +- drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 3 +- drivers/net/wireless/ti/wl18xx/main.c | 2 +- include/net/mac80211.h | 24 +++++++- net/mac80211/cfg.c | 3 +- net/mac80211/ht.c | 82 +++++++++++++++++----------- net/mac80211/ibss.c | 23 +++----- net/mac80211/ieee80211_i.h | 5 +- net/mac80211/mesh_plink.c | 6 +- net/mac80211/mlme.c | 22 ++++---- net/mac80211/rc80211_minstrel_ht.c | 19 +++---- net/mac80211/rx.c | 21 +++---- net/mac80211/sta_info.h | 4 -- net/mac80211/vht.c | 39 +++++++++++++ 27 files changed, 184 insertions(+), 158 deletions(-) (limited to 'drivers/net/wireless/ti/wl18xx') diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 714558d1ba78..54150b6a39ae 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1204,7 +1204,7 @@ static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta) caps |= WLAN_RC_TS_FLAG | WLAN_RC_DS_FLAG; else if (sta->ht_cap.mcs.rx_mask[1]) caps |= WLAN_RC_DS_FLAG; - if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { caps |= WLAN_RC_40_FLAG; if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) caps |= WLAN_RC_SGI_FLAG; diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h index f41ae79e6bc0..41ec27cb6efe 100644 --- a/drivers/net/wireless/iwlwifi/dvm/agn.h +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -338,7 +338,7 @@ int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx, bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap); + struct ieee80211_sta *sta); static inline int iwl_sta_id(struct ieee80211_sta *sta) { diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index a131227c49e9..b25de02964f9 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1305,7 +1305,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1361,7 +1361,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv, tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; rate_mask = lq_sta->active_mimo3_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1410,7 +1410,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index ab768045696b..6deab38c7aee 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -173,7 +173,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap) + struct ieee80211_sta *sta) { if (!ctx->ht.enabled || !ctx->ht.is_40mhz) return false; @@ -183,20 +183,11 @@ bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, return false; #endif - /* - * Remainder of this function checks ht_cap, but if it's - * NULL then we can do HT40 (special case for RXON) - */ - if (!ht_cap) + /* special case for RXON */ + if (!sta) return true; - if (!ht_cap->ht_supported) - return false; - - if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return false; - - return true; + return sta->bandwidth >= IEEE80211_STA_RX_BW_40; } static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, @@ -246,7 +237,7 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, *flags |= cpu_to_le32( (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) *flags |= STA_FLG_HT40_EN_MSK; } diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 60a4291ca221..8ba36e5e4b67 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1209,23 +1209,9 @@ static s32 rs_get_best_rate(struct iwl_mvm *mvm, return new_rate; } -static bool iwl_is_ht40_tx_allowed(struct iwl_mvm *mvm, - struct ieee80211_sta_ht_cap *ht_cap) +static bool iwl_is_ht40_tx_allowed(struct ieee80211_sta *sta) { - /* - * Remainder of this function checks ht_cap, but if it's - * NULL then we can do HT40 (special case for RXON) - */ - if (!ht_cap) - return true; - - if (!ht_cap->ht_supported) - return false; - - if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return false; - - return true; + return sta->bandwidth >= IEEE80211_STA_RX_BW_40; } /* @@ -1258,7 +1244,7 @@ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1311,7 +1297,7 @@ static int rs_switch_to_mimo3(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; rate_mask = lq_sta->active_mimo3_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1356,7 +1342,7 @@ static int rs_switch_to_siso(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 4494d130b37c..84ea04dab303 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -523,8 +523,8 @@ static void _rtl_query_shortgi(struct ieee80211_hw *hw, if (mac->opmode == NL80211_IFTYPE_STATION) bw_40 = mac->bw_40; else if (mac->opmode == NL80211_IFTYPE_AP || - mac->opmode == NL80211_IFTYPE_ADHOC) - bw_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + mac->opmode == NL80211_IFTYPE_ADHOC) + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; if (bw_40 && sgi_40) tcb_desc->use_shortgi = true; @@ -634,8 +634,7 @@ static void _rtl_query_bandwidth_mode(struct ieee80211_hw *hw, return; if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { - if (!(sta->ht_cap.ht_supported) || - !(sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + if (sta->bandwidth == IEEE80211_STA_RX_BW_20) return; } else if (mac->opmode == NL80211_IFTYPE_STATION) { if (!mac->bw_40 || !(sta->ht_cap.ht_supported)) diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index 204f46c4510d..c12a866e1261 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -116,9 +116,8 @@ static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv, if (txrc->short_preamble) rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; if (mac->opmode == NL80211_IFTYPE_AP || - mac->opmode == NL80211_IFTYPE_ADHOC) { - if (sta && (sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + mac->opmode == NL80211_IFTYPE_ADHOC) { + if (sta && (sta->bandwidth >= IEEE80211_STA_RX_BW_40)) rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; } else { if (mac->bw_40) diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index d1f34f6ffbdf..1b65db7fd651 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -1846,9 +1846,9 @@ static void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; - u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; + u8 curshortgi_40mhz = curtxbw_40mhz && + (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1 : 0; diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index da0e9022a99a..b9b1a6e0b16e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -626,8 +626,7 @@ void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c index f4051f4f0390..aa5b42521bb4 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c @@ -1970,8 +1970,7 @@ static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index cdb570ffb4b5..941080e03c06 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -574,8 +574,7 @@ void rtl92de_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc); diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c index 28526a7361f5..084e7773bce2 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -2085,8 +2085,7 @@ static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index = 0; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index f8431a3c2c9d..7b0a2e75b8b8 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -621,8 +621,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c index 149804816ac4..9a0c71c2e15e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c @@ -1866,8 +1866,7 @@ static void rtl8723ae_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index b1fd2b328abf..ac081297db50 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -395,8 +395,7 @@ void rtl8723ae_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a10b7a7a215a..da3ef1b10a9c 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1374,7 +1374,7 @@ static void wl18xx_sta_rc_update(struct wl1271 *wl, struct ieee80211_sta *sta, u32 changed) { - bool wide = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bool wide = sta->bandwidth >= IEEE80211_STA_RX_BW_40; wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7241962f9f13..1e3b4f730397 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1196,6 +1196,24 @@ enum ieee80211_sta_state { IEEE80211_STA_AUTHORIZED, }; +/** + * enum ieee80211_sta_rx_bandwidth - station RX bandwidth + * @IEEE80211_STA_RX_BW_20: station can only receive 20 MHz + * @IEEE80211_STA_RX_BW_40: station can receive up to 40 MHz + * @IEEE80211_STA_RX_BW_80: station can receive up to 80 MHz + * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz + * (including 80+80 MHz) + * + * Implementation note: 20 must be zero to be initialized + * correctly, the values must be sorted. + */ +enum ieee80211_sta_rx_bandwidth { + IEEE80211_STA_RX_BW_20 = 0, + IEEE80211_STA_RX_BW_40, + IEEE80211_STA_RX_BW_80, + IEEE80211_STA_RX_BW_160, +}; + /** * struct ieee80211_sta - station table entry * @@ -1218,6 +1236,7 @@ enum ieee80211_sta_state { * @uapsd_queues: bitmap of queues configured for uapsd. Only valid * if wme is supported. * @max_sp: max Service Period. Only valid if wme is supported. + * @bandwidth: current bandwidth the station can receive with */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1228,6 +1247,7 @@ struct ieee80211_sta { bool wme; u8 uapsd_queues; u8 max_sp; + enum ieee80211_sta_rx_bandwidth bandwidth; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -2086,7 +2106,9 @@ enum ieee80211_frame_release_type { * enum ieee80211_rate_control_changed - flags to indicate what changed * * @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit - * to this station changed. + * to this station changed. The actual bandwidth is in the station + * information -- for HT20/40 the IEEE80211_HT_CAP_SUP_WIDTH_20_40 + * flag changes, for HT and VHT the bandwidth field changes. * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed. * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer * changed (in IBSS mode) due to discovering more information about diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9c9496d01120..c3869ba42343 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1252,8 +1252,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->ht_capa) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - params->ht_capa, - &sta->sta.ht_cap); + params->ht_capa, sta); if (params->vht_capa) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 9e7560becbbb..a64b4f0d373f 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -37,6 +37,9 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, u8 *smask = (u8 *)(&sdata->u.mgd.ht_capa_mask.mcs.rx_mask); int i; + if (!ht_cap->ht_supported) + return; + if (sdata->vif.type != NL80211_IFTYPE_STATION) { /* AP interfaces call this code when adding new stations, * so just silently ignore non station interfaces. @@ -89,22 +92,23 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, } -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, +bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_ht_cap *ht_cap_ie, - struct ieee80211_sta_ht_cap *ht_cap) + struct sta_info *sta) { + struct ieee80211_sta_ht_cap ht_cap; u8 ampdu_info, tx_mcs_set_cap; int i, max_tx_streams; + bool changed; + enum ieee80211_sta_rx_bandwidth bw; - BUG_ON(!ht_cap); - - memset(ht_cap, 0, sizeof(*ht_cap)); + memset(&ht_cap, 0, sizeof(ht_cap)); if (!ht_cap_ie || !sband->ht_cap.ht_supported) - return; + goto apply; - ht_cap->ht_supported = true; + ht_cap.ht_supported = true; /* * The bits listed in this expression should be @@ -112,7 +116,7 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, * advertises more then we can't use those thus * we mask them out. */ - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + ht_cap.cap = le16_to_cpu(ht_cap_ie->cap_info) & (sband->ht_cap.cap | ~(IEEE80211_HT_CAP_LDPC_CODING | IEEE80211_HT_CAP_SUP_WIDTH_20_40 | @@ -121,44 +125,30 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_DSSSCCK40)); - /* Unset 40 MHz if we're not using a 40 MHz channel */ - switch (sdata->vif.bss_conf.chandef.width) { - case NL80211_CHAN_WIDTH_20_NOHT: - case NL80211_CHAN_WIDTH_20: - ht_cap->cap &= ~IEEE80211_HT_CAP_SGI_40; - ht_cap->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - break; - case NL80211_CHAN_WIDTH_40: - case NL80211_CHAN_WIDTH_80: - case NL80211_CHAN_WIDTH_80P80: - case NL80211_CHAN_WIDTH_160: - break; - } - /* * The STBC bits are asymmetric -- if we don't have * TX then mask out the peer's RX and vice versa. */ if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) - ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + ht_cap.cap &= ~IEEE80211_HT_CAP_RX_STBC; if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) - ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; + ht_cap.cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; - ht_cap->ampdu_factor = + ht_cap.ampdu_factor = ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR; - ht_cap->ampdu_density = + ht_cap.ampdu_density = (ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2; /* own MCS TX capabilities */ tx_mcs_set_cap = sband->ht_cap.mcs.tx_params; /* Copy peer MCS TX capabilities, the driver might need them. */ - ht_cap->mcs.tx_params = ht_cap_ie->mcs.tx_params; + ht_cap.mcs.tx_params = ht_cap_ie->mcs.tx_params; /* can we TX with MCS rates? */ if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED)) - return; + goto apply; /* Counting from 0, therefore +1 */ if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF) @@ -176,25 +166,53 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, * - remainder are multiple spatial streams using unequal modulation */ for (i = 0; i < max_tx_streams; i++) - ht_cap->mcs.rx_mask[i] = + ht_cap.mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION) for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE; i < IEEE80211_HT_MCS_MASK_LEN; i++) - ht_cap->mcs.rx_mask[i] = + ht_cap.mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; /* handle MCS rate 32 too */ if (sband->ht_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1) - ht_cap->mcs.rx_mask[32/8] |= 1; + ht_cap.mcs.rx_mask[32/8] |= 1; + apply: /* * If user has specified capability over-rides, take care * of that here. */ - ieee80211_apply_htcap_overrides(sdata, ht_cap); + ieee80211_apply_htcap_overrides(sdata, &ht_cap); + + changed = memcmp(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); + + memcpy(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); + + switch (sdata->vif.bss_conf.chandef.width) { + default: + WARN_ON_ONCE(1); + /* fall through */ + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + bw = IEEE80211_STA_RX_BW_20; + break; + case NL80211_CHAN_WIDTH_40: + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + bw = ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + break; + } + + if (bw != sta->sta.bandwidth) + changed = true; + sta->sta.bandwidth = bw; + + return changed; } void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 2db1f2b90bfe..40b71dfcc79d 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -496,33 +496,26 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, if (sta && elems->ht_operation && elems->ht_cap_elem && sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) { /* we both use HT */ - struct ieee80211_sta_ht_cap sta_ht_cap_new; + struct ieee80211_ht_cap htcap_ie; struct cfg80211_chan_def chandef; ieee80211_ht_oper_to_chandef(channel, elems->ht_operation, &chandef); - ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta_ht_cap_new); + memcpy(&htcap_ie, elems->ht_cap_elem, sizeof(htcap_ie)); /* * fall back to HT20 if we don't use or use * the other extension channel */ - if (chandef.width != NL80211_CHAN_WIDTH_40 || - cfg80211_get_chandef_type(&chandef) != + if (cfg80211_get_chandef_type(&chandef) != sdata->u.ibss.channel_type) - sta_ht_cap_new.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - - if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new, - sizeof(sta_ht_cap_new))) { - memcpy(&sta->sta.ht_cap, &sta_ht_cap_new, - sizeof(sta_ht_cap_new)); - rates_updated = true; - } + htcap_ie.cap_info &= + cpu_to_le16(~IEEE80211_HT_CAP_SUP_WIDTH_20_40); + + rates_updated |= ieee80211_ht_cap_ie_to_sta_ht_cap( + sdata, sband, &htcap_ie, sta); } if (sta && rates_updated) { diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 9206d43ca572..6b41d7787a5a 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1384,10 +1384,10 @@ void ieee80211_purge_tx_queue(struct ieee80211_hw *hw, /* HT */ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_ht_cap *ht_cap); -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, +bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_ht_cap *ht_cap_ie, - struct ieee80211_sta_ht_cap *ht_cap); + struct sta_info *sta); void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid, u16 initiator, u16 reason_code); @@ -1431,6 +1431,7 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, struct sta_info *sta); +enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index a4c7a7e98d14..7765139b24aa 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -373,8 +373,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (elems->ht_cap_elem && sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta->sta.ht_cap); + elems->ht_cap_elem, sta); else memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap)); @@ -383,8 +382,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (!(elems->ht_operation->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, elems->ht_operation, &chandef); if (sta->ch_width != chandef.width) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 58b6e67ffbed..be1147286801 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -219,19 +219,20 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, bssid); - WARN_ON_ONCE(!sta); + if (WARN_ON_ONCE(!sta)) { + mutex_unlock(&local->sta_mtx); + return changed; + } - if (sta && !sta->supports_40mhz) + if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) disable_40 = true; - if (sta && (!reconfig || - (disable_40 != !(sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40)))) { - + if (!reconfig || + disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { if (disable_40) - sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; else - sta->sta.ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); rate_control_rate_update(local, sband, sta, IEEE80211_RC_BW_CHANGED); @@ -2210,10 +2211,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems.ht_cap_elem, &sta->sta.ht_cap); - - sta->supports_40mhz = - sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + elems.ht_cap_elem, sta); if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 6e35dcd2aa2f..6176c71d47ff 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -848,8 +848,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, IEEE80211_HT_CAP_SM_PS_SHIFT; for (i = 0; i < ARRAY_SIZE(mi->groups); i++) { - u16 req = 0; - mi->groups[i].supported = 0; if (i == MINSTREL_CCK_GROUP) { minstrel_ht_update_cck(mp, mi, sband, sta); @@ -857,16 +855,17 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, } if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) { - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - req |= IEEE80211_HT_CAP_SGI_40; - else - req |= IEEE80211_HT_CAP_SGI_20; + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { + if (!(sta_cap & IEEE80211_HT_CAP_SGI_40)) + continue; + } else { + if (!(sta_cap & IEEE80211_HT_CAP_SGI_20)) + continue; + } } - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - req |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; - - if ((sta_cap & req) != req) + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH && + sta->bandwidth < IEEE80211_STA_RX_BW_40) continue; /* Mark MCS > 7 as unsupported if STA is in static SMPS mode */ diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index b5f1bba7ffe1..8a861a50b12f 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2410,26 +2410,21 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: { struct ieee80211_supported_band *sband; u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth; - bool old_40mhz, new_40mhz; + enum ieee80211_sta_rx_bandwidth new_bw; /* If it doesn't support 40 MHz it can't change ... */ - if (!rx->sta->supports_40mhz) + if (!(rx->sta->sta.ht_cap.cap & + IEEE80211_HT_CAP_SUP_WIDTH_20_40)) goto handled; - old_40mhz = rx->sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; - new_40mhz = chanwidth == IEEE80211_HT_CHANWIDTH_ANY; + if (chanwidth == IEEE80211_HT_CHANWIDTH_20MHZ) + new_bw = IEEE80211_STA_RX_BW_20; + else + new_bw = ieee80211_sta_cur_vht_bw(rx->sta); - if (old_40mhz == new_40mhz) + if (rx->sta->sta.bandwidth == new_bw) goto handled; - if (new_40mhz) - rx->sta->sta.ht_cap.cap |= - IEEE80211_HT_CAP_SUP_WIDTH_20_40; - else - rx->sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - sband = rx->local->hw.wiphy->bands[status->band]; rate_control_rate_update(local, sband, rx->sta, diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 350578c396c0..03c42f8d39f0 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -296,8 +296,6 @@ struct sta_ampdu_mlme { * @sta: station information we share with the driver * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered - * @supports_40mhz: tracks whether the station advertised 40 MHz support - * as we overwrite its HT parameters with the currently used value * @rcu_head: RCU head used for freeing this station struct */ struct sta_info { @@ -403,8 +401,6 @@ struct sta_info { unsigned int lost_packets; unsigned int beacon_loss_count; - bool supports_40mhz; - /* keep last! */ struct ieee80211_sta sta; }; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 1606aa165d5f..0fc9a2fb8d53 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -27,6 +27,10 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; + /* A VHT STA must support 40 MHz */ + if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + return; + vht_cap->vht_supported = true; vht_cap->cap = le32_to_cpu(vht_cap_ie->vht_cap_info); @@ -34,4 +38,39 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, /* Copy peer MCS info, the driver might need them. */ memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, sizeof(struct ieee80211_vht_mcs_info)); + + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); +} + +enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 cap = sta->sta.vht_cap.cap; + + if (!sta->sta.vht_cap.vht_supported) + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + + /* TODO: handle VHT opmode notification data */ + + switch (sdata->vif.bss_conf.chandef.width) { + default: + WARN_ON_ONCE(1); + /* fall through */ + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + case NL80211_CHAN_WIDTH_160: + if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) + return IEEE80211_STA_RX_BW_160; + /* fall through */ + case NL80211_CHAN_WIDTH_80P80: + if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) + return IEEE80211_STA_RX_BW_160; + /* fall through */ + case NL80211_CHAN_WIDTH_80: + return IEEE80211_STA_RX_BW_80; + } } -- cgit v1.2.3