From e675f0cc9a872fd152edc0c77acfed19bf28b81e Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 26 Mar 2012 00:03:42 +0000 Subject: ppp: Don't stop and restart queue on every TX packet MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For every transmitted packet, ppp_start_xmit() will stop the netdev queue and then, if appropriate, restart it. This causes the TX softirq to run, entirely gratuitously. This is "only" a waste of CPU time in the normal case, but it's actively harmful when the PPP device is a TEQL slave — the wakeup will cause the offending device to receive the next TX packet from the TEQL queue, when it *should* have gone to the next slave in the list. We end up seeing large bursts of packets on just *one* slave device, rather than using the full available bandwidth over all slaves. This patch fixes the problem by *not* unconditionally stopping the queue in ppp_start_xmit(). It adds a return value from ppp_xmit_process() which indicates whether the queue should be stopped or not. It *doesn't* remove the call to netif_wake_queue() from ppp_xmit_process(), because other code paths (especially from ppp_output_wakeup()) need it there and it's messy to push it out to the other callers to do it based on the return value. So we leave it in place — it's a no-op in the case where the queue wasn't stopped, so it's harmless in the TX path. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_generic.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 159da2905fe9..33f8c51968b6 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -235,7 +235,7 @@ struct ppp_net { /* Prototypes. */ static int ppp_unattached_ioctl(struct net *net, struct ppp_file *pf, struct file *file, unsigned int cmd, unsigned long arg); -static void ppp_xmit_process(struct ppp *ppp); +static int ppp_xmit_process(struct ppp *ppp); static void ppp_send_frame(struct ppp *ppp, struct sk_buff *skb); static void ppp_push(struct ppp *ppp); static void ppp_channel_push(struct channel *pch); @@ -968,9 +968,9 @@ ppp_start_xmit(struct sk_buff *skb, struct net_device *dev) proto = npindex_to_proto[npi]; put_unaligned_be16(proto, pp); - netif_stop_queue(dev); skb_queue_tail(&ppp->file.xq, skb); - ppp_xmit_process(ppp); + if (!ppp_xmit_process(ppp)) + netif_stop_queue(dev); return NETDEV_TX_OK; outf: @@ -1048,10 +1048,11 @@ static void ppp_setup(struct net_device *dev) * Called to do any work queued up on the transmit side * that can now be done. */ -static void +static int ppp_xmit_process(struct ppp *ppp) { struct sk_buff *skb; + int ret = 0; ppp_xmit_lock(ppp); if (!ppp->closing) { @@ -1061,10 +1062,13 @@ ppp_xmit_process(struct ppp *ppp) ppp_send_frame(ppp, skb); /* If there's no work left to do, tell the core net code that we can accept some more. */ - if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq)) + if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq)) { netif_wake_queue(ppp->dev); + ret = 1; + } } ppp_xmit_unlock(ppp); + return ret; } static inline struct sk_buff * -- cgit v1.2.3 From aacc1bea190d731755a65cb8ec31dd756f4e263e Mon Sep 17 00:00:00 2001 From: "Multanen, Eric W" Date: Wed, 28 Mar 2012 07:49:09 +0000 Subject: ixgbe: driver fix for link flap Fix up code so that changes in DCB settings are detected only when ixgbe_dcbnl_set_all is called. Previously, a series of 'change' commands followed by a call to ixgbe_dcbnl_set_all() would always be handled as a HW change - even if the net change was zero. This patch checks for this case of no actual change and skips going through the HW set process. Without this fix, the link could reset and result in a link flap. The core change in this patch is to check for changes in the ixgbe_copy_dcb_cfg() routine - and return a bitmask of detected changes. The other places where changes were detected previously can be removed. Signed-off-by: Eric Multanen Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c | 164 ++++++++++++------------ 1 file changed, 80 insertions(+), 84 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index dde65f951400..652e4b09546d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -44,62 +44,94 @@ #define DCB_NO_HW_CHG 1 /* DCB configuration did not change */ #define DCB_HW_CHG 2 /* DCB configuration changed, no reset */ -int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, - struct ixgbe_dcb_config *dst_dcb_cfg, int tc_max) +int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *scfg, + struct ixgbe_dcb_config *dcfg, int tc_max) { - struct tc_configuration *src_tc_cfg = NULL; - struct tc_configuration *dst_tc_cfg = NULL; - int i; + struct tc_configuration *src = NULL; + struct tc_configuration *dst = NULL; + int i, j; + int tx = DCB_TX_CONFIG; + int rx = DCB_RX_CONFIG; + int changes = 0; - if (!src_dcb_cfg || !dst_dcb_cfg) - return -EINVAL; + if (!scfg || !dcfg) + return changes; for (i = DCB_PG_ATTR_TC_0; i < tc_max + DCB_PG_ATTR_TC_0; i++) { - src_tc_cfg = &src_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0]; - dst_tc_cfg = &dst_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0]; + src = &scfg->tc_config[i - DCB_PG_ATTR_TC_0]; + dst = &dcfg->tc_config[i - DCB_PG_ATTR_TC_0]; - dst_tc_cfg->path[DCB_TX_CONFIG].prio_type = - src_tc_cfg->path[DCB_TX_CONFIG].prio_type; + if (dst->path[tx].prio_type != src->path[tx].prio_type) { + dst->path[tx].prio_type = src->path[tx].prio_type; + changes |= BIT_PG_TX; + } - dst_tc_cfg->path[DCB_TX_CONFIG].bwg_id = - src_tc_cfg->path[DCB_TX_CONFIG].bwg_id; + if (dst->path[tx].bwg_id != src->path[tx].bwg_id) { + dst->path[tx].bwg_id = src->path[tx].bwg_id; + changes |= BIT_PG_TX; + } - dst_tc_cfg->path[DCB_TX_CONFIG].bwg_percent = - src_tc_cfg->path[DCB_TX_CONFIG].bwg_percent; + if (dst->path[tx].bwg_percent != src->path[tx].bwg_percent) { + dst->path[tx].bwg_percent = src->path[tx].bwg_percent; + changes |= BIT_PG_TX; + } - dst_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap = - src_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap; + if (dst->path[tx].up_to_tc_bitmap != + src->path[tx].up_to_tc_bitmap) { + dst->path[tx].up_to_tc_bitmap = + src->path[tx].up_to_tc_bitmap; + changes |= (BIT_PG_TX | BIT_PFC | BIT_APP_UPCHG); + } - dst_tc_cfg->path[DCB_RX_CONFIG].prio_type = - src_tc_cfg->path[DCB_RX_CONFIG].prio_type; + if (dst->path[rx].prio_type != src->path[rx].prio_type) { + dst->path[rx].prio_type = src->path[rx].prio_type; + changes |= BIT_PG_RX; + } - dst_tc_cfg->path[DCB_RX_CONFIG].bwg_id = - src_tc_cfg->path[DCB_RX_CONFIG].bwg_id; + if (dst->path[rx].bwg_id != src->path[rx].bwg_id) { + dst->path[rx].bwg_id = src->path[rx].bwg_id; + changes |= BIT_PG_RX; + } - dst_tc_cfg->path[DCB_RX_CONFIG].bwg_percent = - src_tc_cfg->path[DCB_RX_CONFIG].bwg_percent; + if (dst->path[rx].bwg_percent != src->path[rx].bwg_percent) { + dst->path[rx].bwg_percent = src->path[rx].bwg_percent; + changes |= BIT_PG_RX; + } - dst_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap = - src_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap; + if (dst->path[rx].up_to_tc_bitmap != + src->path[rx].up_to_tc_bitmap) { + dst->path[rx].up_to_tc_bitmap = + src->path[rx].up_to_tc_bitmap; + changes |= (BIT_PG_RX | BIT_PFC | BIT_APP_UPCHG); + } } for (i = DCB_PG_ATTR_BW_ID_0; i < DCB_PG_ATTR_BW_ID_MAX; i++) { - dst_dcb_cfg->bw_percentage[DCB_TX_CONFIG] - [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage - [DCB_TX_CONFIG][i-DCB_PG_ATTR_BW_ID_0]; - dst_dcb_cfg->bw_percentage[DCB_RX_CONFIG] - [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage - [DCB_RX_CONFIG][i-DCB_PG_ATTR_BW_ID_0]; + j = i - DCB_PG_ATTR_BW_ID_0; + if (dcfg->bw_percentage[tx][j] != scfg->bw_percentage[tx][j]) { + dcfg->bw_percentage[tx][j] = scfg->bw_percentage[tx][j]; + changes |= BIT_PG_TX; + } + if (dcfg->bw_percentage[rx][j] != scfg->bw_percentage[rx][j]) { + dcfg->bw_percentage[rx][j] = scfg->bw_percentage[rx][j]; + changes |= BIT_PG_RX; + } } for (i = DCB_PFC_UP_ATTR_0; i < DCB_PFC_UP_ATTR_MAX; i++) { - dst_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc = - src_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc; + j = i - DCB_PFC_UP_ATTR_0; + if (dcfg->tc_config[j].dcb_pfc != scfg->tc_config[j].dcb_pfc) { + dcfg->tc_config[j].dcb_pfc = scfg->tc_config[j].dcb_pfc; + changes |= BIT_PFC; + } } - dst_dcb_cfg->pfc_mode_enable = src_dcb_cfg->pfc_mode_enable; + if (dcfg->pfc_mode_enable != scfg->pfc_mode_enable) { + dcfg->pfc_mode_enable = scfg->pfc_mode_enable; + changes |= BIT_PFC; + } - return 0; + return changes; } static u8 ixgbe_dcbnl_get_state(struct net_device *netdev) @@ -179,20 +211,6 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc, if (up_map != DCB_ATTR_VALUE_UNDEFINED) adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap = up_map; - - if ((adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type != - adapter->dcb_cfg.tc_config[tc].path[0].prio_type) || - (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id != - adapter->dcb_cfg.tc_config[tc].path[0].bwg_id) || - (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent != - adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent) || - (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap != - adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap)) - adapter->dcb_set_bitmap |= BIT_PG_TX; - - if (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap != - adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap) - adapter->dcb_set_bitmap |= BIT_PFC | BIT_APP_UPCHG; } static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, @@ -201,10 +219,6 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, struct ixgbe_adapter *adapter = netdev_priv(netdev); adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] = bw_pct; - - if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] != - adapter->dcb_cfg.bw_percentage[0][bwg_id]) - adapter->dcb_set_bitmap |= BIT_PG_TX; } static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc, @@ -223,20 +237,6 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc, if (up_map != DCB_ATTR_VALUE_UNDEFINED) adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap = up_map; - - if ((adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type != - adapter->dcb_cfg.tc_config[tc].path[1].prio_type) || - (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id != - adapter->dcb_cfg.tc_config[tc].path[1].bwg_id) || - (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent != - adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent) || - (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap != - adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap)) - adapter->dcb_set_bitmap |= BIT_PG_RX; - - if (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap != - adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap) - adapter->dcb_set_bitmap |= BIT_PFC; } static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id, @@ -245,10 +245,6 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id, struct ixgbe_adapter *adapter = netdev_priv(netdev); adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] = bw_pct; - - if (adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] != - adapter->dcb_cfg.bw_percentage[1][bwg_id]) - adapter->dcb_set_bitmap |= BIT_PG_RX; } static void ixgbe_dcbnl_get_pg_tc_cfg_tx(struct net_device *netdev, int tc, @@ -298,10 +294,8 @@ static void ixgbe_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority, adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc = setting; if (adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc != - adapter->dcb_cfg.tc_config[priority].dcb_pfc) { - adapter->dcb_set_bitmap |= BIT_PFC; + adapter->dcb_cfg.tc_config[priority].dcb_pfc) adapter->temp_dcb_cfg.pfc_mode_enable = true; - } } static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, @@ -336,7 +330,8 @@ static void ixgbe_dcbnl_devreset(struct net_device *dev) static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - int ret, i; + int ret = DCB_NO_HW_CHG; + int i; #ifdef IXGBE_FCOE struct dcb_app app = { .selector = DCB_APP_IDTYPE_ETHTYPE, @@ -355,12 +350,13 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) /* Fail command if not in CEE mode */ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) - return 1; + return ret; - ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, - MAX_TRAFFIC_CLASS); - if (ret) - return DCB_NO_HW_CHG; + adapter->dcb_set_bitmap |= ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, + &adapter->dcb_cfg, + MAX_TRAFFIC_CLASS); + if (!adapter->dcb_set_bitmap) + return ret; if (adapter->dcb_cfg.pfc_mode_enable) { switch (adapter->hw.mac.type) { @@ -420,6 +416,8 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) netdev_set_prio_tc_map(netdev, i, prio_tc[i]); + + ret = DCB_HW_CHG_RST; } if (adapter->dcb_set_bitmap & BIT_PFC) { @@ -430,7 +428,8 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) DCB_TX_CONFIG, prio_tc); ixgbe_dcb_unpack_pfc(&adapter->dcb_cfg, &pfc_en); ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc_en, prio_tc); - ret = DCB_HW_CHG; + if (ret != DCB_HW_CHG_RST) + ret = DCB_HW_CHG; } if (adapter->dcb_cfg.pfc_mode_enable) @@ -531,9 +530,6 @@ static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state) struct ixgbe_adapter *adapter = netdev_priv(netdev); adapter->temp_dcb_cfg.pfc_mode_enable = state; - if (adapter->temp_dcb_cfg.pfc_mode_enable != - adapter->dcb_cfg.pfc_mode_enable) - adapter->dcb_set_bitmap |= BIT_PFC; } /** -- cgit v1.2.3 From bb9e44d0d0f45da356c39e485edacff6e14ba961 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 21 Mar 2012 00:39:12 +0000 Subject: e1000e: prevent oops when adapter is being closed and reset simultaneously When the adapter is closed while it is simultaneously going through a reset, it can cause a null-pointer dereference when the two different code paths simultaneously cleanup up the Tx/Rx resources. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/e1000.h | 6 ++++++ drivers/net/ethernet/intel/e1000e/netdev.c | 9 +++++++++ 2 files changed, 15 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 86cdd4793992..b83897f76ee3 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -161,6 +161,12 @@ struct e1000_info; /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 +/* + * Count for polling __E1000_RESET condition every 10-20msec. + * Experimentation has shown the reset can take approximately 210msec. + */ +#define E1000_CHECK_RESET_COUNT 25 + #define DEFAULT_RDTR 0 #define DEFAULT_RADV 8 #define BURST_RDTR 0x20 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 2c38a65ade87..6878601f20c5 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3968,6 +3968,10 @@ static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct pci_dev *pdev = adapter->pdev; + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); @@ -5472,6 +5476,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, netif_device_detach(netdev); if (netif_running(netdev)) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); + WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); e1000e_down(adapter); e1000_free_irq(adapter); -- cgit v1.2.3 From bf03085f85112eac2d19036ea3003071220285bb Mon Sep 17 00:00:00 2001 From: Matthew Vick Date: Fri, 16 Mar 2012 09:03:00 +0000 Subject: e1000e: Guarantee descriptor writeback flush success. In rare circumstances, a descriptor writeback flush may not work if it arrives on a specific clock cycle as a writeback request is going out. Signed-off-by: Matthew Vick Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 6878601f20c5..19ab2154802c 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1059,6 +1059,13 @@ static void e1000_print_hw_hang(struct work_struct *work) ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); /* execute the writes immediately */ e1e_flush(); + /* + * Due to rare timing issues, write to TIDV again to ensure + * the write is successful + */ + ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); + /* execute the writes immediately */ + e1e_flush(); adapter->tx_hang_recheck = true; return; } @@ -3616,6 +3623,16 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter) /* execute the writes immediately */ e1e_flush(); + + /* + * due to rare timing issues, write to TIDV/RDTR again to ensure the + * write is successful + */ + ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); + ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); + + /* execute the writes immediately */ + e1e_flush(); } static void e1000e_update_stats(struct e1000_adapter *adapter); -- cgit v1.2.3 From b3300146aa8efc5d3937fd33f3cfdc580a3843bc Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 2 Apr 2012 00:02:09 +0000 Subject: phy:icplus:fix Auto Power Saving in ip101a_config_init. This patch fixes Auto Power Saving configuration in ip101a_config_init which was broken as there is no phy register write followed after setting IP101A_APS_ON flag. This patch also fixes the return value of ip101a_config_init. Without this patch ip101a_config_init returns 2 which is not an error accroding to IS_ERR and the mac driver will continue accessing 2 as valid pointer to phy_dev resulting in memory fault. Signed-off-by: Srinivas Kandagatla Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 0856e1b7a849..f08c85acf761 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -162,7 +162,8 @@ static int ip101a_g_config_init(struct phy_device *phydev) /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); c |= IP101A_G_APS_ON; - return c; + + return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); } static int ip175c_read_status(struct phy_device *phydev) -- cgit v1.2.3 From f2ed5ee1b050495be49e5a0d5df152663558ef08 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Tue, 3 Apr 2012 00:07:11 +0000 Subject: bnx2x: correction to firmware interface Commit 621b4d6 updated the bnx2x driver to a new FW version, but lacked a commit to a header file with changes to the firmware's interface. The missing interface change causes iscsi and fcoe to misbehave with the updated firmware. Signed-off-by: Yuval Mintz Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein CC: Michael Chan CC: Bhanu Prakash Gollapudi Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h | 110 ++++++++++----------- 1 file changed, 55 insertions(+), 55 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h index cd6dfa9eaa3a..b9b263323436 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h @@ -25,31 +25,31 @@ (IRO[149].base + ((funcId) * IRO[149].m1)) #define CSTORM_IGU_MODE_OFFSET (IRO[157].base) #define CSTORM_ISCSI_CQ_SIZE_OFFSET(pfId) \ - (IRO[315].base + ((pfId) * IRO[315].m1)) -#define CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ (IRO[316].base + ((pfId) * IRO[316].m1)) +#define CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ + (IRO[317].base + ((pfId) * IRO[317].m1)) #define CSTORM_ISCSI_EQ_CONS_OFFSET(pfId, iscsiEqId) \ - (IRO[308].base + ((pfId) * IRO[308].m1) + ((iscsiEqId) * IRO[308].m2)) + (IRO[309].base + ((pfId) * IRO[309].m1) + ((iscsiEqId) * IRO[309].m2)) #define CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(pfId, iscsiEqId) \ - (IRO[310].base + ((pfId) * IRO[310].m1) + ((iscsiEqId) * IRO[310].m2)) + (IRO[311].base + ((pfId) * IRO[311].m1) + ((iscsiEqId) * IRO[311].m2)) #define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(pfId, iscsiEqId) \ - (IRO[309].base + ((pfId) * IRO[309].m1) + ((iscsiEqId) * IRO[309].m2)) + (IRO[310].base + ((pfId) * IRO[310].m1) + ((iscsiEqId) * IRO[310].m2)) #define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_VALID_OFFSET(pfId, iscsiEqId) \ - (IRO[311].base + ((pfId) * IRO[311].m1) + ((iscsiEqId) * IRO[311].m2)) + (IRO[312].base + ((pfId) * IRO[312].m1) + ((iscsiEqId) * IRO[312].m2)) #define CSTORM_ISCSI_EQ_PROD_OFFSET(pfId, iscsiEqId) \ - (IRO[307].base + ((pfId) * IRO[307].m1) + ((iscsiEqId) * IRO[307].m2)) + (IRO[308].base + ((pfId) * IRO[308].m1) + ((iscsiEqId) * IRO[308].m2)) #define CSTORM_ISCSI_EQ_SB_INDEX_OFFSET(pfId, iscsiEqId) \ - (IRO[313].base + ((pfId) * IRO[313].m1) + ((iscsiEqId) * IRO[313].m2)) + (IRO[314].base + ((pfId) * IRO[314].m1) + ((iscsiEqId) * IRO[314].m2)) #define CSTORM_ISCSI_EQ_SB_NUM_OFFSET(pfId, iscsiEqId) \ - (IRO[312].base + ((pfId) * IRO[312].m1) + ((iscsiEqId) * IRO[312].m2)) + (IRO[313].base + ((pfId) * IRO[313].m1) + ((iscsiEqId) * IRO[313].m2)) #define CSTORM_ISCSI_HQ_SIZE_OFFSET(pfId) \ - (IRO[314].base + ((pfId) * IRO[314].m1)) + (IRO[315].base + ((pfId) * IRO[315].m1)) #define CSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ - (IRO[306].base + ((pfId) * IRO[306].m1)) + (IRO[307].base + ((pfId) * IRO[307].m1)) #define CSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ - (IRO[305].base + ((pfId) * IRO[305].m1)) + (IRO[306].base + ((pfId) * IRO[306].m1)) #define CSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ - (IRO[304].base + ((pfId) * IRO[304].m1)) + (IRO[305].base + ((pfId) * IRO[305].m1)) #define CSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ (IRO[151].base + ((funcId) * IRO[151].m1)) #define CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(pfId) \ @@ -96,37 +96,37 @@ #define TSTORM_FUNC_EN_OFFSET(funcId) \ (IRO[103].base + ((funcId) * IRO[103].m1)) #define TSTORM_ISCSI_ERROR_BITMAP_OFFSET(pfId) \ - (IRO[271].base + ((pfId) * IRO[271].m1)) -#define TSTORM_ISCSI_L2_ISCSI_OOO_CID_TABLE_OFFSET(pfId) \ (IRO[272].base + ((pfId) * IRO[272].m1)) -#define TSTORM_ISCSI_L2_ISCSI_OOO_CLIENT_ID_TABLE_OFFSET(pfId) \ +#define TSTORM_ISCSI_L2_ISCSI_OOO_CID_TABLE_OFFSET(pfId) \ (IRO[273].base + ((pfId) * IRO[273].m1)) -#define TSTORM_ISCSI_L2_ISCSI_OOO_PROD_OFFSET(pfId) \ +#define TSTORM_ISCSI_L2_ISCSI_OOO_CLIENT_ID_TABLE_OFFSET(pfId) \ (IRO[274].base + ((pfId) * IRO[274].m1)) +#define TSTORM_ISCSI_L2_ISCSI_OOO_PROD_OFFSET(pfId) \ + (IRO[275].base + ((pfId) * IRO[275].m1)) #define TSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ - (IRO[270].base + ((pfId) * IRO[270].m1)) + (IRO[271].base + ((pfId) * IRO[271].m1)) #define TSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ - (IRO[269].base + ((pfId) * IRO[269].m1)) + (IRO[270].base + ((pfId) * IRO[270].m1)) #define TSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ - (IRO[268].base + ((pfId) * IRO[268].m1)) + (IRO[269].base + ((pfId) * IRO[269].m1)) #define TSTORM_ISCSI_RQ_SIZE_OFFSET(pfId) \ - (IRO[267].base + ((pfId) * IRO[267].m1)) + (IRO[268].base + ((pfId) * IRO[268].m1)) #define TSTORM_ISCSI_TCP_LOCAL_ADV_WND_OFFSET(pfId) \ - (IRO[276].base + ((pfId) * IRO[276].m1)) + (IRO[277].base + ((pfId) * IRO[277].m1)) #define TSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(pfId) \ - (IRO[263].base + ((pfId) * IRO[263].m1)) -#define TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ (IRO[264].base + ((pfId) * IRO[264].m1)) -#define TSTORM_ISCSI_TCP_VARS_MID_LOCAL_MAC_ADDR_OFFSET(pfId) \ +#define TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ (IRO[265].base + ((pfId) * IRO[265].m1)) -#define TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ +#define TSTORM_ISCSI_TCP_VARS_MID_LOCAL_MAC_ADDR_OFFSET(pfId) \ (IRO[266].base + ((pfId) * IRO[266].m1)) +#define TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ + (IRO[267].base + ((pfId) * IRO[267].m1)) #define TSTORM_MAC_FILTER_CONFIG_OFFSET(pfId) \ (IRO[202].base + ((pfId) * IRO[202].m1)) #define TSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ (IRO[105].base + ((funcId) * IRO[105].m1)) #define TSTORM_TCP_MAX_CWND_OFFSET(pfId) \ - (IRO[216].base + ((pfId) * IRO[216].m1)) + (IRO[217].base + ((pfId) * IRO[217].m1)) #define TSTORM_VF_TO_PF_OFFSET(funcId) \ (IRO[104].base + ((funcId) * IRO[104].m1)) #define USTORM_AGG_DATA_OFFSET (IRO[206].base) @@ -140,29 +140,29 @@ #define USTORM_ETH_PAUSE_ENABLED_OFFSET(portId) \ (IRO[183].base + ((portId) * IRO[183].m1)) #define USTORM_FCOE_EQ_PROD_OFFSET(pfId) \ - (IRO[317].base + ((pfId) * IRO[317].m1)) + (IRO[318].base + ((pfId) * IRO[318].m1)) #define USTORM_FUNC_EN_OFFSET(funcId) \ (IRO[178].base + ((funcId) * IRO[178].m1)) #define USTORM_ISCSI_CQ_SIZE_OFFSET(pfId) \ - (IRO[281].base + ((pfId) * IRO[281].m1)) -#define USTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ (IRO[282].base + ((pfId) * IRO[282].m1)) +#define USTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ + (IRO[283].base + ((pfId) * IRO[283].m1)) #define USTORM_ISCSI_ERROR_BITMAP_OFFSET(pfId) \ - (IRO[286].base + ((pfId) * IRO[286].m1)) + (IRO[287].base + ((pfId) * IRO[287].m1)) #define USTORM_ISCSI_GLOBAL_BUF_PHYS_ADDR_OFFSET(pfId) \ - (IRO[283].base + ((pfId) * IRO[283].m1)) + (IRO[284].base + ((pfId) * IRO[284].m1)) #define USTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ - (IRO[279].base + ((pfId) * IRO[279].m1)) + (IRO[280].base + ((pfId) * IRO[280].m1)) #define USTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ - (IRO[278].base + ((pfId) * IRO[278].m1)) + (IRO[279].base + ((pfId) * IRO[279].m1)) #define USTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ - (IRO[277].base + ((pfId) * IRO[277].m1)) + (IRO[278].base + ((pfId) * IRO[278].m1)) #define USTORM_ISCSI_R2TQ_SIZE_OFFSET(pfId) \ - (IRO[280].base + ((pfId) * IRO[280].m1)) + (IRO[281].base + ((pfId) * IRO[281].m1)) #define USTORM_ISCSI_RQ_BUFFER_SIZE_OFFSET(pfId) \ - (IRO[284].base + ((pfId) * IRO[284].m1)) -#define USTORM_ISCSI_RQ_SIZE_OFFSET(pfId) \ (IRO[285].base + ((pfId) * IRO[285].m1)) +#define USTORM_ISCSI_RQ_SIZE_OFFSET(pfId) \ + (IRO[286].base + ((pfId) * IRO[286].m1)) #define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(pfId) \ (IRO[182].base + ((pfId) * IRO[182].m1)) #define USTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ @@ -188,39 +188,39 @@ #define XSTORM_FUNC_EN_OFFSET(funcId) \ (IRO[47].base + ((funcId) * IRO[47].m1)) #define XSTORM_ISCSI_HQ_SIZE_OFFSET(pfId) \ - (IRO[294].base + ((pfId) * IRO[294].m1)) + (IRO[295].base + ((pfId) * IRO[295].m1)) #define XSTORM_ISCSI_LOCAL_MAC_ADDR0_OFFSET(pfId) \ - (IRO[297].base + ((pfId) * IRO[297].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR1_OFFSET(pfId) \ (IRO[298].base + ((pfId) * IRO[298].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR2_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR1_OFFSET(pfId) \ (IRO[299].base + ((pfId) * IRO[299].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR3_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR2_OFFSET(pfId) \ (IRO[300].base + ((pfId) * IRO[300].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR4_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR3_OFFSET(pfId) \ (IRO[301].base + ((pfId) * IRO[301].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR5_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR4_OFFSET(pfId) \ (IRO[302].base + ((pfId) * IRO[302].m1)) -#define XSTORM_ISCSI_LOCAL_VLAN_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR5_OFFSET(pfId) \ (IRO[303].base + ((pfId) * IRO[303].m1)) +#define XSTORM_ISCSI_LOCAL_VLAN_OFFSET(pfId) \ + (IRO[304].base + ((pfId) * IRO[304].m1)) #define XSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ - (IRO[293].base + ((pfId) * IRO[293].m1)) + (IRO[294].base + ((pfId) * IRO[294].m1)) #define XSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ - (IRO[292].base + ((pfId) * IRO[292].m1)) + (IRO[293].base + ((pfId) * IRO[293].m1)) #define XSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ - (IRO[291].base + ((pfId) * IRO[291].m1)) + (IRO[292].base + ((pfId) * IRO[292].m1)) #define XSTORM_ISCSI_R2TQ_SIZE_OFFSET(pfId) \ - (IRO[296].base + ((pfId) * IRO[296].m1)) + (IRO[297].base + ((pfId) * IRO[297].m1)) #define XSTORM_ISCSI_SQ_SIZE_OFFSET(pfId) \ - (IRO[295].base + ((pfId) * IRO[295].m1)) + (IRO[296].base + ((pfId) * IRO[296].m1)) #define XSTORM_ISCSI_TCP_VARS_ADV_WND_SCL_OFFSET(pfId) \ - (IRO[290].base + ((pfId) * IRO[290].m1)) + (IRO[291].base + ((pfId) * IRO[291].m1)) #define XSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(pfId) \ - (IRO[289].base + ((pfId) * IRO[289].m1)) + (IRO[290].base + ((pfId) * IRO[290].m1)) #define XSTORM_ISCSI_TCP_VARS_TOS_OFFSET(pfId) \ - (IRO[288].base + ((pfId) * IRO[288].m1)) + (IRO[289].base + ((pfId) * IRO[289].m1)) #define XSTORM_ISCSI_TCP_VARS_TTL_OFFSET(pfId) \ - (IRO[287].base + ((pfId) * IRO[287].m1)) + (IRO[288].base + ((pfId) * IRO[288].m1)) #define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(pfId) \ (IRO[44].base + ((pfId) * IRO[44].m1)) #define XSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ -- cgit v1.2.3 From cff4c16296754888b6fd8c886bc860a888e20257 Mon Sep 17 00:00:00 2001 From: Artem Savkov Date: Tue, 3 Apr 2012 10:29:11 +0000 Subject: r8169: enable napi on resume. NAPI is disabled during suspend and needs to be enabled on resume. Without this the driver locks up during resume in rtl_reset_work() trying to disable NAPI again. Signed-off-by: Artem Savkov Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7b23554f80b6..f54509377efa 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5810,7 +5810,10 @@ static void __rtl8169_resume(struct net_device *dev) rtl_pll_power_up(tp); + rtl_lock_work(tp); + napi_enable(&tp->napi); set_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags); + rtl_unlock_work(tp); rtl_schedule_task(tp, RTL_FLAG_TASK_RESET_PENDING); } -- cgit v1.2.3 From 2af73d4b2afe826d23e83f3747f850eefbd867ff Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Tue, 3 Apr 2012 22:56:19 +0000 Subject: net/bonding: emit address change event also in bond_release commit 7d26bb103c4 "bonding: emit event when bonding changes MAC" didn't take care to emit the NETDEV_CHANGEADDR event in bond_release, where bonding actually changes the mac address (to all zeroes). As a result the neighbours aren't deleted by the core networking code (which does so upon getting that event). Signed-off-by: Shlomo Pongratz Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 941b4e189adf..5cb85cb0be4f 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2034,6 +2034,9 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) write_unlock_bh(&bond->lock); unblock_netpoll_tx(); + if (bond->slave_cnt == 0) + call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev); + bond_compute_features(bond); if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) && (old_features & NETIF_F_VLAN_CHALLENGED)) -- cgit v1.2.3 From 234bcf8a499ee206145c7007d12d9706a254f790 Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Tue, 3 Apr 2012 22:56:20 +0000 Subject: net/bonding: correctly proxy slave neigh param setup ndo function The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 51 ++++++++++++++++++++++++++++++++++------- 1 file changed, 43 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 5cb85cb0be4f..fc8a8d5c4dbd 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3704,17 +3704,52 @@ static void bond_set_multicast_list(struct net_device *bond_dev) read_unlock(&bond->lock); } -static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms) +static int bond_neigh_init(struct neighbour *n) { - struct bonding *bond = netdev_priv(dev); + struct bonding *bond = netdev_priv(n->dev); struct slave *slave = bond->first_slave; + const struct net_device_ops *slave_ops; + struct neigh_parms parms; + int ret; + + if (!slave) + return 0; + + slave_ops = slave->dev->netdev_ops; + + if (!slave_ops->ndo_neigh_setup) + return 0; + + parms.neigh_setup = NULL; + parms.neigh_cleanup = NULL; + ret = slave_ops->ndo_neigh_setup(slave->dev, &parms); + if (ret) + return ret; + + /* + * Assign slave's neigh_cleanup to neighbour in case cleanup is called + * after the last slave has been detached. Assumes that all slaves + * utilize the same neigh_cleanup (true at this writing as only user + * is ipoib). + */ + n->parms->neigh_cleanup = parms.neigh_cleanup; + + if (!parms.neigh_setup) + return 0; + + return parms.neigh_setup(n); +} + +/* + * The bonding ndo_neigh_setup is called at init time beofre any + * slave exists. So we must declare proxy setup function which will + * be used at run time to resolve the actual slave neigh param setup. + */ +static int bond_neigh_setup(struct net_device *dev, + struct neigh_parms *parms) +{ + parms->neigh_setup = bond_neigh_init; - if (slave) { - const struct net_device_ops *slave_ops - = slave->dev->netdev_ops; - if (slave_ops->ndo_neigh_setup) - return slave_ops->ndo_neigh_setup(slave->dev, parms); - } return 0; } -- cgit v1.2.3 From 857504d06d565ad5b401d505937932775ddf1c47 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 4 Apr 2012 12:10:27 +0000 Subject: sky2: copy received packets on inefficient unaligned architecture Modified from original patch from Chris. The sky2 driver has to have 8 byte alignment of receive buffer on some chip versions. On architectures which don't support efficient unaligned access this doesn't work very well. The solution is to just copy all received packets which is what the driver already does for small packets. This allows the driver to be used on the Tilera TILEmpower-Gx, since the tile architecture doesn't currently handle kernel unaligned accesses, just userspace. Signed-off-by: Stephen Hemminger Acked-by: Chris Metcalf Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index b806d9b4defb..c9b504e2dfc3 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2469,6 +2469,17 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) return err; } +static inline bool needs_copy(const struct rx_ring_info *re, + unsigned length) +{ +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + /* Some architectures need the IP header to be aligned */ + if (!IS_ALIGNED(re->data_addr + ETH_HLEN, sizeof(u32))) + return true; +#endif + return length < copybreak; +} + /* For small just reuse existing skb for next receive */ static struct sk_buff *receive_copy(struct sky2_port *sky2, const struct rx_ring_info *re, @@ -2599,7 +2610,7 @@ static struct sk_buff *sky2_receive(struct net_device *dev, goto error; okay: - if (length < copybreak) + if (needs_copy(re, length)) skb = receive_copy(sky2, re, length); else skb = receive_new(sky2, re, length); -- cgit v1.2.3 From 27d9129f5ae830cc031a898e0c220e1cdda69b34 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:28:54 +0000 Subject: bnx2x: PFC fix Fix a problem in which PFC frames are not honored, due to incorrect link attributes synchronization following PMF migration, and verify PFC XON is not stuck from previous link change. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 18 +++++++++++++++++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 1 + 2 files changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index efa557b76ac7..7e2ebbad7587 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -1371,7 +1371,14 @@ static void bnx2x_update_pfc_xmac(struct link_params *params, pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN | XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN | XMAC_PFC_CTRL_HI_REG_RX_PFC_EN | - XMAC_PFC_CTRL_HI_REG_TX_PFC_EN; + XMAC_PFC_CTRL_HI_REG_TX_PFC_EN | + XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON; + /* Write pause and PFC registers */ + REG_WR(bp, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val); + pfc1_val &= ~XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON; + } /* Write pause and PFC registers */ @@ -6843,6 +6850,12 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars) SINGLE_MEDIA_DIRECT(params)) && (phy_vars[active_external_phy].fault_detected == 0)); + /* Update the PFC configuration in case it was changed */ + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + else + vars->link_status &= ~LINK_STATUS_PFC_ENABLED; + if (vars->link_up) rc = bnx2x_update_link_up(params, vars, link_10g_plus); else @@ -12049,6 +12062,9 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_emac_init(params, vars); + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + if (params->num_phys == 0) { DP(NETIF_MSG_LINK, "No phy found for initialization !!\n"); return -EINVAL; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index ab0a250f95fa..ecc7fa6a6ca5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -5354,6 +5354,7 @@ #define XMAC_CTRL_REG_TX_EN (0x1<<0) #define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1<<18) #define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1<<17) +#define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON (0x1<<1) #define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN (0x1<<0) #define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN (0x1<<3) #define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN (0x1<<4) -- cgit v1.2.3 From ca05f29cf515ac4a8e162c8e0eee886727f5dcc7 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:28:55 +0000 Subject: bnx2x: Fix BCM57810-KR FC Fix 57810-KR flow-control handling link is achieved via CL37 AN. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 27 ++++++++++++++++++++++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 4 ++++ 2 files changed, 31 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 7e2ebbad7587..8c00bbc94038 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3655,6 +3655,33 @@ static void bnx2x_ext_phy_update_adv_fc(struct bnx2x_phy *phy, if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) { bnx2x_cl22_read(bp, phy, 0x4, &ld_pause); bnx2x_cl22_read(bp, phy, 0x5, &lp_pause); + } else if (CHIP_IS_E3(bp) && + SINGLE_MEDIA_DIRECT(params)) { + u8 lane = bnx2x_get_warpcore_lane(phy, params); + u16 gp_status, gp_mask; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_4, + &gp_status); + gp_mask = (MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL | + MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP) << + lane; + if ((gp_status & gp_mask) == gp_mask) { + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_ADV_PAUSE, &ld_pause); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); + } else { + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LD, &ld_pause); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &lp_pause); + ld_pause = ((ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + << 3); + lp_pause = ((lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + << 3); + } } else { bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index ecc7fa6a6ca5..1ea2b956e194 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6944,6 +6944,10 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_GP2_STATUS_GP_2_2 0x81d2 #define MDIO_WC_REG_GP2_STATUS_GP_2_3 0x81d3 #define MDIO_WC_REG_GP2_STATUS_GP_2_4 0x81d4 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1 #define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP 0x81EE #define MDIO_WC_REG_UC_INFO_B1_VERSION 0x81F0 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE 0x81F2 -- cgit v1.2.3 From 6a51c0d17b8fb6ae300ba5bc42a020160944e1b2 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:28:56 +0000 Subject: bnx2x: Fix BCM57810-KR AN speed transition BCM57810-KR link may not come up in 1G after running loopback test, so set the relevant registers to their default values before starting KR autoneg. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 8c00bbc94038..ce0b0c220e64 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3732,7 +3732,23 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, u16 val16 = 0, lane, bam37 = 0; struct bnx2x *bp = params->bp; DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); - + /* Set to default registers that may be overriden by 10G force */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_PAR_DET_10G_CTRL, 0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, 0x7415); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190); /* Disable Autoneg: re-enable it after adv is done. */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0); @@ -4402,7 +4418,7 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, switch (serdes_net_if) { case PORT_HW_CFG_NET_SERDES_IF_KR: /* Enable KR Auto Neg */ - if (params->loopback_mode == LOOPBACK_NONE) + if (params->loopback_mode != LOOPBACK_EXT) bnx2x_warpcore_enable_AN_KR(phy, params, vars); else { DP(NETIF_MSG_LINK, "Setting KR 10G-Force\n"); -- cgit v1.2.3 From 25182fc22237f0fb1789c7ac9a79e871a1898ae5 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:28:57 +0000 Subject: bnx2x: Fix BCM578x0-SFI pre-emphasis settings Fix 578x0-SFI pre-emphasis settings per HW recommendations to achieve better link strength. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index ce0b0c220e64..1e2fea37eec9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3994,13 +3994,13 @@ static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy, } else { misc1_val |= 0x9; - tap_val = ((0x12 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | - (0x2d << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | - (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); + tap_val = ((0x0f << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | + (0x2b << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | + (0x02 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); tx_driver_val = - ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | + ((0x03 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); + (0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); } bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val); -- cgit v1.2.3 From 9379c9be4b20d5cb7bde577f402b749cd7d3caa2 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:28:58 +0000 Subject: bnx2x: Restore 1G LED on BCM57712+BCM8727 designs. Fix no-LED problem when link speed is 1G on BCM57712 + BCM8727 designs, by removing a logic error checking for a different PHY. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 33 +++++++++++++----------- 1 file changed, 18 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 1e2fea37eec9..1438da858678 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -6216,12 +6216,14 @@ int bnx2x_set_led(struct link_params *params, tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); if (params->phy[EXT_PHY1].type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) - EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp & 0xfff1); - else { - EMAC_WR(bp, EMAC_REG_EMAC_LED, - (tmp | EMAC_LED_OVERRIDE)); - } + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) + tmp &= ~(EMAC_LED_1000MB_OVERRIDE | + EMAC_LED_100MB_OVERRIDE | + EMAC_LED_10MB_OVERRIDE); + else + tmp |= EMAC_LED_OVERRIDE; + + EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp); break; case LED_MODE_OPER: @@ -6276,10 +6278,15 @@ int bnx2x_set_led(struct link_params *params, hw_led_mode); } else if ((params->phy[EXT_PHY1].type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) && - (mode != LED_MODE_OPER)) { + (mode == LED_MODE_ON)) { REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | 0x3); + EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | + EMAC_LED_OVERRIDE | EMAC_LED_1000MB_OVERRIDE); + /* Break here; otherwise, it'll disable the + * intended override. + */ + break; } else REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode); @@ -6294,13 +6301,9 @@ int bnx2x_set_led(struct link_params *params, LED_BLINK_RATE_VAL_E1X_E2); REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port*4, 1); - if ((params->phy[EXT_PHY1].type != - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) && - (mode != LED_MODE_OPER)) { - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, - (tmp & (~EMAC_LED_OVERRIDE))); - } + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp & (~EMAC_LED_OVERRIDE))); if (CHIP_IS_E1(bp) && ((speed == SPEED_2500) || -- cgit v1.2.3 From 59a2e53b826103be8c22d9820355320b749b38ef Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:28:59 +0000 Subject: bnx2x: Fix link issue for BCM8727 boards. This patch fixes a link problem on BCM57712 + BCM8727 designs in which the TX laser is controller by GPIO, after 1.60.xx drivers were previously loaded. On these designs the TX_LASER is enabled by logic AND between the PHY (through MDIO), and the GPIO. When an old driver is used, it disables the MDIO part, hence the GPIO control had no affect de facto. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 1438da858678..732b4c80f116 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -8089,7 +8089,9 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, netdev_err(bp->dev, "Warning: Unqualified SFP+ module detected," " Port %d from %s part number %s\n", params->port, vendor_name, vendor_pn); - phy->flags |= FLAGS_SFP_NOT_APPROVED; + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) != + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG) + phy->flags |= FLAGS_SFP_NOT_APPROVED; return -EINVAL; } @@ -9149,6 +9151,12 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy, tmp2 &= 0xFFEF; bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, tmp2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + &tmp2); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + (tmp2 & 0x7fff)); } return 0; @@ -9329,12 +9337,11 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, ((1<<5) | (1<<2))); } - DP(NETIF_MSG_LINK, "Enabling 8727 TX laser if SFP is approved\n"); - bnx2x_8727_specific_func(phy, params, ENABLE_TX); - /* If transmitter is disabled, ignore false link up indication */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &val1); - if (val1 & (1<<15)) { + + if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) { + DP(NETIF_MSG_LINK, "Enabling 8727 TX laser\n"); + bnx2x_sfp_set_transmitter(params, phy, 1); + } else { DP(NETIF_MSG_LINK, "Tx is disabled\n"); return 0; } -- cgit v1.2.3 From 8267bbb01f005fa8d0c8d046ecc24ae0b52e4d70 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:29:00 +0000 Subject: bnx2x: Fix BCM84833 PHY FW version presentation Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 732b4c80f116..b576a3ae8e91 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -9435,8 +9435,7 @@ static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1); - bnx2x_save_spirom_version(bp, port, - ((fw_ver1 & 0xf000)>>5) | (fw_ver1 & 0x7f), + bnx2x_save_spirom_version(bp, port, fw_ver1 & 0xfff, phy->ver_addr); } else { /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */ -- cgit v1.2.3 From 99bf7f34368aac9b54dfa8801ae490a2326704f9 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:29:01 +0000 Subject: bnx2x: Clear BCM84833 LED after fan failure Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 9 +++++++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 3 +++ 2 files changed, 12 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index b576a3ae8e91..ce95ef71f96f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -9858,6 +9858,15 @@ static int bnx2x_84833_hw_reset_phy(struct bnx2x_phy *phy, other_shmem_base_addr)); u32 shmem_base_path[2]; + + /* Work around for 84833 LED failure inside RESET status */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + MDIO_AN_REG_8481_MII_CTRL_FORCE_1G); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, + MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF); + shmem_base_path[0] = params->shmem_base; shmem_base_path[1] = other_shmem_base_addr; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 1ea2b956e194..c25803b9c0ca 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6821,10 +6821,13 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0 +#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40 #define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1 #define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4 #define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6 #define MDIO_AN_REG_8481_1000T_CTRL 0xffe9 +#define MDIO_AN_REG_8481_1G_100T_EXT_CTRL 0xfff0 +#define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF 0x0008 #define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5 #define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7 #define MDIO_AN_REG_8481_AUX_CTRL 0xfff8 -- cgit v1.2.3 From f93fb01628c00d1f26e8b45d2f10b8feb650dd4b Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:29:02 +0000 Subject: bnx2x: Fix BCM57711+BCM84823 link issue Fix a link problem on the second port of BCM57711 + BCM84823 boards due to incorrect macro usage. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index ce95ef71f96f..7e41682bc2dd 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -10177,7 +10177,7 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, u8 port; u16 val16; - if (!(CHIP_IS_E1(bp))) + if (!(CHIP_IS_E1x(bp))) port = BP_PATH(bp); else port = params->port; @@ -10204,7 +10204,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, u16 val; u8 port; - if (!(CHIP_IS_E1(bp))) + if (!(CHIP_IS_E1x(bp))) port = BP_PATH(bp); else port = params->port; -- cgit v1.2.3 From ca7b91bbd1f150216e6354cc20818aa993f331f2 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 4 Apr 2012 01:40:02 +0000 Subject: bnx2x: Clear MDC/MDIO warning message This patch clears a warning message of "MDC/MDIO access timeout" which may appear when interface is loaded due to missing clock setting before resetting the LED, and starting periodic function too early. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 - drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 44556b719e81..4b054812713a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1874,7 +1874,6 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) * bnx2x_periodic_task(). */ smp_mb(); - queue_delayed_work(bnx2x_wq, &bp->period_task, 0); } else bp->port.pmf = 0; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 7e41682bc2dd..ad95324dc042 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -12205,10 +12205,10 @@ int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, * Hold it as vars low */ /* clear link led */ + bnx2x_set_mdio_clk(bp, params->chip_id, port); bnx2x_set_led(params, vars, LED_MODE_OFF, 0); if (reset_ext_phy) { - bnx2x_set_mdio_clk(bp, params->chip_id, port); for (phy_index = EXT_PHY1; phy_index < params->num_phys; phy_index++) { if (params->phy[phy_index].link_reset) { -- cgit v1.2.3 From 03f2eecdfc8aadae395ac593c099006390c8085c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 3 Apr 2012 22:13:01 +0000 Subject: stmmac: re-add IFF_UNICAST_FLT for dwmac1000 In commit (bfab27a stmmac: add the experimental PCI support) the IFF_UNICAST_FLT flag has been removed from the stmmac_mac_device_setup() function. This patch re-adds the flag. Signed-off-by: Marc Kleine-Budde Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e85ffbd54830..48d56da62f08 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1737,10 +1737,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv) struct mac_device_info *mac; /* Identify the MAC HW device */ - if (priv->plat->has_gmac) + if (priv->plat->has_gmac) { + priv->dev->priv_flags |= IFF_UNICAST_FLT; mac = dwmac1000_setup(priv->ioaddr); - else + } else { mac = dwmac100_setup(priv->ioaddr); + } if (!mac) return -ENOMEM; -- cgit v1.2.3 From 117980c4c994b6fe58e873fe803c9bcdcb4337a3 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 4 Apr 2012 09:40:40 +0000 Subject: mlx4: allocate just enough pages instead of always 4 pages The driver uses a 2-order allocation, which is too much on architectures like ppc64, which has a 64KiB page. This particular allocation is used for large packet fragments that may have a size of 512, 1024, 4096 or fill the whole allocation. So, a minimum size of 16384 is good enough and will be the same size that is used in architectures of 4KiB sized pages. This will avoid allocation failures that we see when the system is under stress, but still has plenty of memory, like the one below. This will also allow us to set the interface MTU to higher values like 9000, which was not possible on ppc64 without this patch. Node 1 DMA: 737*64kB 37*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 51904kB 83137 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 10420096kB Total swap = 10420096kB 107776 pages RAM 1184 pages reserved 147343 pages shared 28152 pages non-shared netstat: page allocation failure. order:2, mode:0x4020 Call Trace: [c0000001a4fa3770] [c000000000012f04] .show_stack+0x74/0x1c0 (unreliable) [c0000001a4fa3820] [c00000000016af38] .__alloc_pages_nodemask+0x618/0x930 [c0000001a4fa39a0] [c0000000001a71a0] .alloc_pages_current+0xb0/0x170 [c0000001a4fa3a40] [d00000000dcc3e00] .mlx4_en_alloc_frag+0x200/0x240 [mlx4_en] [c0000001a4fa3b10] [d00000000dcc3f8c] .mlx4_en_complete_rx_desc+0x14c/0x250 [mlx4_en] [c0000001a4fa3be0] [d00000000dcc4eec] .mlx4_en_process_rx_cq+0x62c/0x850 [mlx4_en] [c0000001a4fa3d20] [d00000000dcc5150] .mlx4_en_poll_rx_cq+0x40/0x90 [mlx4_en] [c0000001a4fa3dc0] [c0000000004e2bb8] .net_rx_action+0x178/0x450 [c0000001a4fa3eb0] [c00000000009c9b8] .__do_softirq+0x118/0x290 [c0000001a4fa3f90] [c000000000031df8] .call_do_softirq+0x14/0x24 [c000000184c3b520] [c00000000000e700] .do_softirq+0xf0/0x110 [c000000184c3b5c0] [c00000000009c6d4] .irq_exit+0xb4/0xc0 [c000000184c3b640] [c00000000000e964] .do_IRQ+0x144/0x230 Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Kleber Sacilotto de Souza Tested-by: Kleber Sacilotto de Souza Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 9e2b911a1230..d69fee41f24a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -83,8 +83,9 @@ #define MLX4_EN_WATCHDOG_TIMEOUT (15 * HZ) -#define MLX4_EN_ALLOC_ORDER 2 -#define MLX4_EN_ALLOC_SIZE (PAGE_SIZE << MLX4_EN_ALLOC_ORDER) +/* Use the maximum between 16384 and a single page */ +#define MLX4_EN_ALLOC_SIZE PAGE_ALIGN(16384) +#define MLX4_EN_ALLOC_ORDER get_order(MLX4_EN_ALLOC_SIZE) #define MLX4_EN_MAX_LRO_DESCRIPTORS 32 -- cgit v1.2.3 From 5a4309746cd74734daa964acb02690c22b3c8911 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Thu, 5 Apr 2012 03:47:43 +0000 Subject: bonding: properly unset current_arp_slave on slave link up When a slave comes up, we're unsetting the current_arp_slave without removing active flags from it, which can lead to situations where we have more than one slave with active flags in active-backup mode. To avoid this situation we must remove the active flags from a slave before removing it as a current_arp_slave. Signed-off-by: Veaceslav Falico Signed-off-by: Jay Vosburgh Signed-off-by: Andy Gospodarek Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index fc8a8d5c4dbd..62d2409bb293 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3010,7 +3010,11 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks) trans_start + delta_in_ticks)) || bond->curr_active_slave != slave) { slave->link = BOND_LINK_UP; - bond->current_arp_slave = NULL; + if (bond->current_arp_slave) { + bond_set_slave_inactive_flags( + bond->current_arp_slave); + bond->current_arp_slave = NULL; + } pr_info("%s: link status definitely up for interface %s.\n", bond->dev->name, slave->dev->name); -- cgit v1.2.3