From 65ab8385b67854792e89267907f9fcb27e779f95 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Wed, 4 Feb 2009 16:31:39 -0800 Subject: cxgb3: Fix lro switch The LRO switch is always set to 1 in the rx processing loop. It breaks the accelerated iSCSI receive traffic. Fix its computation. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/sge.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 379a1324db4e..d31791f60292 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2276,8 +2276,7 @@ no_mem: } else if ((len = ntohl(r->len_cq)) != 0) { struct sge_fl *fl; - if (eth) - lro = qs->lro_enabled && is_eth_tcp(rss_hi); + lro &= eth && is_eth_tcp(rss_hi); fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0]; if (fl->use_pages) { -- cgit v1.2.3 From 1fbe49328f7442090439addddf441fb5b3186e71 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 4 Feb 2009 16:37:40 -0800 Subject: gianfar: Fix BD_LENGTH_MASK definition BD_LENGTH_MASK is supposed to catch the low 16-bits of the status field, not the low byte. The old way, we would never be able to clean up tx packets with sizes divisible by 256. Signed-off-by: Andy Fleming Signed-off-by: David S. Miller --- drivers/net/gianfar.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index b1a83344acc7..eaa86897f5c3 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -312,7 +312,7 @@ extern const char gfar_driver_version[]; #define ATTRELI_EI(x) (x) #define BD_LFLAG(flags) ((flags) << 16) -#define BD_LENGTH_MASK 0x00ff +#define BD_LENGTH_MASK 0x0000ffff /* TxBD status field bits */ #define TXBD_READY 0x8000 -- cgit v1.2.3 From b98ac702f49042ab0c382b839465b95a2bd0cd65 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 4 Feb 2009 16:38:05 -0800 Subject: gianfar: Fix potential soft reset race SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work properly. The syncs in the gfar_write() commands have been hiding this, but we need to guarantee it. Signed-off-by: Andy Fleming Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 3f7eab42aef1..acae2d8cd688 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -351,6 +351,9 @@ static int gfar_probe(struct of_device *ofdev, /* Reset MAC layer */ gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); + /* We need to delay at least 3 TX clocks */ + udelay(2); + tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); gfar_write(&priv->regs->maccfg1, tempval); -- cgit v1.2.3