From 1cc0c998fdf2cb665d625fb565a0d6db5c81c639 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 23 Apr 2012 09:03:49 +0800 Subject: ACPI: Fix D3hot v D3cold confusion Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot in some places, but D3cold in other places. After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD; and all references to D3hot use ACPI_STATE_D3_HOT. ACPI's _PR3 method is used to enter both D3hot and D3cold states. What distinguishes D3hot from D3cold is the presence _PR3 (Power Resources for D3hot) If these resources are all ON, then the state is D3hot. If _PR3 is not present, or all _PR0 resources for the devices are OFF, then the state is D3cold. This patch applies after Linux-3.4-rc1. A future syntax cleanup may remove ACPI_STATE_D3 to emphasize that it always means ACPI_STATE_D3_COLD. Signed-off-by: Lin Ming Acked-by: Rafael J. Wysocki Reviewed-by: Aaron Lu Signed-off-by: Len Brown --- drivers/pci/pci-acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/pci/pci-acpi.c') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 0f150f271c2a..1929c0c63b75 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -200,7 +200,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) return PCI_D1; case ACPI_STATE_D2: return PCI_D2; - case ACPI_STATE_D3: + case ACPI_STATE_D3_HOT: return PCI_D3hot; case ACPI_STATE_D3_COLD: return PCI_D3cold; @@ -223,7 +223,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) [PCI_D0] = ACPI_STATE_D0, [PCI_D1] = ACPI_STATE_D1, [PCI_D2] = ACPI_STATE_D2, - [PCI_D3hot] = ACPI_STATE_D3, + [PCI_D3hot] = ACPI_STATE_D3_HOT, [PCI_D3cold] = ACPI_STATE_D3 }; int error = -EINVAL; -- cgit v1.2.3