From c302d35eac32bbd99ed9e3dc5b03d58073c78e86 Mon Sep 17 00:00:00 2001 From: Kamal Mostafa Date: Mon, 20 Oct 2014 12:08:10 -0700 Subject: Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe" This reverts bceee4a97eb5 ("PCI: pciehp: Prevent NULL dereference during probe") because it was accidentally applied twice: 62e4492c3063 ("PCI: Prevent NULL dereference during pciehp probe") bceee4a97eb5 ("PCI: pciehp: Prevent NULL dereference during probe") Revert the latter to dispose of the duplicated code block. [bhelgaas: tidy changelog, drop stable tag] Signed-off-by: Kamal Mostafa Signed-off-by: Bjorn Helgaas CC: Andreas Noever --- drivers/pci/hotplug/pciehp_core.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 3a5e7e28b874..07aa722bb12c 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -262,13 +262,6 @@ static int pciehp_probe(struct pcie_device *dev) goto err_out_none; } - if (!dev->port->subordinate) { - /* Can happen if we run out of bus numbers during probe */ - dev_err(&dev->device, - "Hotplug bridge without secondary bus, ignoring\n"); - goto err_out_none; - } - ctrl = pcie_init(dev); if (!ctrl) { dev_err(&dev->device, "Controller initialization failed\n"); -- cgit v1.2.3 From a2fa6f64c26aa0ea75b15116dd4a4f89bb5c869e Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Mon, 27 Oct 2014 13:17:32 +0800 Subject: PCI: imx6: Wait for clocks to stabilize after ref_en For boards without a reset GPIO we skip the delay between enabling the pcie_ref_clk and touching the RC registers for configuration. This hangs the system if there isn't a proper delay to ensure the clocks are settled in the DW PCIe core. Also iMX6Q always needs an additional 10us delay to make sure the reset is propagated through the core, as we don't have an explicitly controlled reset input on this SoC. This fixes a problem with 3fce0e882f61 ("PCI: imx6: Delay enabling reference clock for SS until it stabilizes"): the kernel doesn't boot on systems that don't pass the PCI GPIO reset in the DTB. This regression affects mx6 nitrogen boards. [bhelgaas: add regression info in changelog] Fixes: 3fce0e882f61 ("PCI: imx6: Delay enabling reference clock for SS until it stabilizes") Reported-by: Fabio Estevam Tested-by: Fabio Estevam Signed-off-by: Richard Zhu Signed-off-by: Bjorn Helgaas Acked-by: Lucas Stach --- drivers/pci/host/pci-imx6.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 233fe8a88264..69202d1eb8fb 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -275,15 +275,22 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) goto err_pcie; } - /* allow the clocks to stabilize */ - usleep_range(200, 500); - /* power up core phy and enable ref clock */ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18); + /* + * the async reset input need ref clock to sync internally, + * when the ref clock comes after reset, internal synced + * reset time is too short, cannot meet the requirement. + * add one ~10us delay here. + */ + udelay(10); regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16); + /* allow the clocks to stabilize */ + usleep_range(200, 500); + /* Some boards don't have PCIe reset GPIO. */ if (gpio_is_valid(imx6_pcie->reset_gpio)) { gpio_set_value(imx6_pcie->reset_gpio, 0); -- cgit v1.2.3 From d8e7d53a2fc14e0830ab728cb84ee19933d3ac8d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 30 Oct 2014 09:30:28 -0700 Subject: PCI: Rename sysfs 'enabled' file back to 'enable' Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"), I misstyped the 'enable' sysfs filename as 'enabled', which broke the userspace API. This patch fixes that issue by renaming the file back. Fixes: 5136b2da770d ("PCI: convert bus code to use dev_groups") Reported-by: Jeff Epler Tested-by: Jeff Epler # on v3.14-rt Signed-off-by: Greg Kroah-Hartman Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # 3.13 --- drivers/pci/pci-sysfs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 92b6d9ab00e4..2c6643fdc0cf 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -185,7 +185,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_RO(modalias); -static ssize_t enabled_store(struct device *dev, struct device_attribute *attr, +static ssize_t enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct pci_dev *pdev = to_pci_dev(dev); @@ -210,7 +210,7 @@ static ssize_t enabled_store(struct device *dev, struct device_attribute *attr, return result < 0 ? result : count; } -static ssize_t enabled_show(struct device *dev, struct device_attribute *attr, +static ssize_t enable_show(struct device *dev, struct device_attribute *attr, char *buf) { struct pci_dev *pdev; @@ -218,7 +218,7 @@ static ssize_t enabled_show(struct device *dev, struct device_attribute *attr, pdev = to_pci_dev(dev); return sprintf(buf, "%u\n", atomic_read(&pdev->enable_cnt)); } -static DEVICE_ATTR_RW(enabled); +static DEVICE_ATTR_RW(enable); #ifdef CONFIG_NUMA static ssize_t numa_node_show(struct device *dev, struct device_attribute *attr, @@ -563,7 +563,7 @@ static struct attribute *pci_dev_attrs[] = { #endif &dev_attr_dma_mask_bits.attr, &dev_attr_consistent_dma_mask_bits.attr, - &dev_attr_enabled.attr, + &dev_attr_enable.attr, &dev_attr_broken_parity_status.attr, &dev_attr_msi_bus.attr, #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI) -- cgit v1.2.3