From dc1a94ae1749d14c55f8b54e9d92bd89df82d51a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 29 Nov 2009 16:35:54 +0100 Subject: PCI/PM: Propagate wake-up enable for PCIe devices too Having read the PM part of the PCIe 2.0 specification more carefully I think that it was a mistake to restrict the wake-up enable propagation to non-PCIe devices, because if we do not request control of the root ports' PME registers via OSC, PCIe PME is supposed to be handled by the platform, just like the non-PCIe PME. Even if we do that, the wake-up propagation is done to allow the devices to wake up the system from sleep states which involves the platform anyway, so it won't hurt. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index cc617ddd33d0..7e2829538a4c 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -112,11 +112,7 @@ static bool acpi_pci_can_wakeup(struct pci_dev *dev) static void acpi_pci_propagate_wakeup_enable(struct pci_bus *bus, bool enable) { while (bus->parent) { - struct pci_dev *bridge = bus->self; - int ret; - - ret = acpi_pm_device_sleep_wake(&bridge->dev, enable); - if (!ret || pci_is_pcie(bridge)) + if (!acpi_pm_device_sleep_wake(&bus->self->dev, enable)) return; bus = bus->parent; } @@ -131,9 +127,7 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) if (acpi_pci_can_wakeup(dev)) return acpi_pm_device_sleep_wake(&dev->dev, enable); - if (!pci_is_pcie(dev)) - acpi_pci_propagate_wakeup_enable(dev->bus, enable); - + acpi_pci_propagate_wakeup_enable(dev->bus, enable); return 0; } -- cgit v1.2.3 From 2820f333e3b4ad96590093efbed7b3400bcf492b Mon Sep 17 00:00:00 2001 From: Csaba Henk Date: Tue, 15 Dec 2009 17:55:25 +0530 Subject: PCI: Handle case when no pci device can provide cache line size hint Prior to this patch, if pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, ...) returns 0 for all dev, pci_cache_line_size ends up set to zero (instead of pci_dfl_cache_line_size). This patch ensures the pci_cache_line_size = pci_dfl_cache_line_size setting in the above scenario. This happens in case of a kvm-88 guest (where, consequently, the rtl8139 NIC failed to initialize). Acked-by: Tejun Heo Signed-off-by: Csaba Henk Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7cfa7c38d318..f70f4e23225c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2629,7 +2629,7 @@ static int __init pci_apply_final_quirks(void) if (!pci_cache_line_size) { printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", cls << 2, pci_dfl_cache_line_size << 2); - pci_cache_line_size = cls; + pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; } return 0; -- cgit v1.2.3 From b9c3b266411d27f1a6466c19d146d08db576bfea Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 7 Dec 2009 13:03:21 +0800 Subject: PCI: support device-specific reset methods Add a new type of quirk for resetting devices at pci_dev_reset time. This is necessary to handle device with nonstandard reset procedures, especially useful for guest drivers. Signed-off-by: Yu Zhao Signed-off-by: Dexuan Cui Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 19 +++++++++++++++++++ drivers/pci/pci.h | 8 ++++++++ drivers/pci/quirks.c | 9 +++++++++ 3 files changed, 36 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 0bc27e059019..6011d064e89d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2284,6 +2284,21 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) return 0; } +static int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + struct pci_dev_reset_methods *i; + + for (i = pci_dev_reset_methods; i->reset; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->reset(dev, probe); + } + + return -ENOTTY; +} + static int pci_dev_reset(struct pci_dev *dev, int probe) { int rc; @@ -2296,6 +2311,10 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) down(&dev->dev.sem); } + rc = pci_dev_specific_reset(dev, probe); + if (rc != -ENOTTY) + goto done; + rc = pcie_flr(dev, probe); if (rc != -ENOTTY) goto done; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 33ed8e0aba1e..709eaa4fee51 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -313,4 +313,12 @@ static inline int pci_resource_alignment(struct pci_dev *dev, extern void pci_enable_acs(struct pci_dev *dev); +struct pci_dev_reset_methods { + u16 vendor; + u16 device; + int (*reset)(struct pci_dev *dev, int probe); +}; + +extern struct pci_dev_reset_methods pci_dev_reset_methods[]; + #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f70f4e23225c..86c9177a6c6c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2636,6 +2636,15 @@ static int __init pci_apply_final_quirks(void) } fs_initcall_sync(pci_apply_final_quirks); + +/* + * Followings are device-specific reset methods which can be used to + * reset a single function if other methods (e.g. FLR, PM D0->D3) are + * not available. + */ +struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { 0 } +}; #else void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} #endif -- cgit v1.2.3 From aeb30016fec3378c543cae33654c2144277fe674 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 7 Dec 2009 13:03:22 +0800 Subject: PCI: add Intel USB specific reset method Handle device specific reset requirements (i.e. vendor reg for reset along with appropriate timeout). Signed-off-by: Yu Zhao Signed-off-by: Dexuan Cui Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 86c9177a6c6c..cf96776d4bbf 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2642,7 +2642,31 @@ fs_initcall_sync(pci_apply_final_quirks); * reset a single function if other methods (e.g. FLR, PM D0->D3) are * not available. */ +static int reset_intel_generic_dev(struct pci_dev *dev, int probe) +{ + int pos; + + /* only implement PCI_CLASS_SERIAL_USB at present */ + if (dev->class == PCI_CLASS_SERIAL_USB) { + pos = pci_find_capability(dev, PCI_CAP_ID_VNDR); + if (!pos) + return -ENOTTY; + + if (probe) + return 0; + + pci_write_config_byte(dev, pos + 0x4, 1); + msleep(100); + + return 0; + } else { + return -ENOTTY; + } +} + struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + reset_intel_generic_dev }, { 0 } }; #else -- cgit v1.2.3 From c763e7b58f71833e6cb7b05493eb1adda4811b08 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 7 Dec 2009 13:03:23 +0800 Subject: PCI: add Intel 82599 Virtual Function specific reset method Handle device specific timeout and use FLR. Signed-off-by: Yu Zhao Signed-off-by: Dexuan Cui Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index cf96776d4bbf..8726698866b1 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2664,7 +2664,29 @@ static int reset_intel_generic_dev(struct pci_dev *dev, int probe) } } +static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) +{ + int pos; + + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!pos) + return -ENOTTY; + + if (probe) + return 0; + + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_BCR_FLR); + msleep(100); + + return 0; +} + +#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed + struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, + reset_intel_82599_sfp_virtfn }, { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, reset_intel_generic_dev }, { 0 } -- cgit v1.2.3 From 45e829ea412760d2404d7dfc42528df46aedbf62 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Thu, 3 Dec 2009 06:49:24 -0500 Subject: PCI: change PCI nomenclature in drivers/pci/ (comment changes) Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern comments only. Signed-off-by: Stefan Assmann Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/shpchp.h | 2 +- drivers/pci/intel-iommu.c | 6 +++--- drivers/pci/intr_remapping.c | 2 +- drivers/pci/pci.c | 6 +++--- drivers/pci/pcie/aer/aer_inject.c | 4 ++-- drivers/pci/pcie/aer/aerdrv.c | 2 +- drivers/pci/pcie/aer/aerdrv_acpi.c | 2 +- drivers/pci/pcie/aer/aerdrv_core.c | 6 +++--- drivers/pci/pcie/aspm.c | 4 ++-- drivers/pci/search.c | 6 +++--- 10 files changed, 20 insertions(+), 20 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index bd588eb8e922..8e210cd76e55 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -121,7 +121,7 @@ struct controller { #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 #define PCI_DEVICE_ID_AMD_POGO_7458 0x7458 -/* AMD PCIX bridge registers */ +/* AMD PCI-X bridge registers */ #define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C #define PCIX_MISCII_OFFSET 0x48 #define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80 diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 8d6159426311..25e15d518bd9 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -304,7 +304,7 @@ struct device_domain_info { int segment; /* PCI domain */ u8 bus; /* PCI bus number */ u8 devfn; /* PCI devfn number */ - struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */ + struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */ struct intel_iommu *iommu; /* IOMMU used by this device */ struct dmar_domain *domain; /* pointer to domain */ }; @@ -1611,7 +1611,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev, return ret; parent = parent->bus->self; } - if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */ + if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */ return domain_context_mapping_one(domain, pci_domain_nr(tmp->subordinate), tmp->subordinate->number, 0, @@ -3319,7 +3319,7 @@ static void iommu_detach_dependent_devices(struct intel_iommu *iommu, parent->devfn); parent = parent->bus->self; } - if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */ + if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */ iommu_detach_dev(iommu, tmp->subordinate->number, 0); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index 1487bf2be863..c26caf180990 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -528,7 +528,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev) bridge = pci_find_upstream_pcie_bridge(dev); if (bridge) { - if (pci_is_pcie(bridge))/* this is a PCIE-to-PCI/PCIX bridge */ + if (pci_is_pcie(bridge))/* this is a PCIe-to-PCI/PCIX bridge */ set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, (bridge->bus->number << 8) | dev->bus->number); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6011d064e89d..d50522bf16b1 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1153,11 +1153,11 @@ pci_disable_device(struct pci_dev *dev) /** * pcibios_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * - * Sets the PCI-E reset state for the device. This is the default + * Sets the PCIe reset state for the device. This is the default * implementation. Architecture implementations can override this. */ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, @@ -1168,7 +1168,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, /** * pci_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 7fcd5331b14c..0cae0f2b353a 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -1,7 +1,7 @@ /* - * PCIE AER software error injection support. + * PCIe AER software error injection support. * - * Debuging PCIE AER code is quite difficult because it is hard to + * Debuging PCIe AER code is quite difficult because it is hard to * trigger various real hardware errors. Software based error * injection can fake almost all kinds of errors with the help of a * user space helper tool aer-inject, which can be gotten from: diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 97a345927b55..21f215f4daa3 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev) mutex_init(&rpc->rpc_mutex); init_waitqueue_head(&rpc->wait_release); - /* Use PCIE bus function to store rpc into PCIE device */ + /* Use PCIe bus function to store rpc into PCIe device */ set_service_data(dev, rpc); return rpc; diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index 8edb2f300e8f..04814087658d 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -24,7 +24,7 @@ * * @return: Zero on success. Nonzero otherwise. * - * Invoked when PCIE bus loads AER service driver. To avoid conflict with + * Invoked when PCIe bus loads AER service driver. To avoid conflict with * BIOS AER support requires BIOS to yield AER control to OS native driver. **/ int aer_osc_setup(struct pcie_device *pciedev) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index ae672ca80333..c843a799814d 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -587,7 +587,7 @@ static void handle_error_source(struct pcie_device *aerdev, * aer_enable_rootport - enable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus loads AER service driver. + * Invoked when PCIe bus loads AER service driver. */ void aer_enable_rootport(struct aer_rpc *rpc) { @@ -597,7 +597,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) u32 reg32; pos = pci_pcie_cap(pdev); - /* Clear PCIE Capability's Device Status */ + /* Clear PCIe Capability's Device Status */ pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16); pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16); @@ -631,7 +631,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) * disable_root_aer - disable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus unloads AER service driver. + * Invoked when PCIe bus unloads AER service driver. */ static void disable_root_aer(struct aer_rpc *rpc) { diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5a01fc7fbf05..be53d98fa384 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1,6 +1,6 @@ /* * File: drivers/pci/pcie/aspm.c - * Enabling PCIE link L0s/L1 state and Clock Power Management + * Enabling PCIe link L0s/L1 state and Clock Power Management * * Copyright (C) 2007 Intel * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) @@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) int pos; u32 reg32; /* - * Some functions in a slot might not all be PCIE functions, + * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot */ list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 6dae87143258..4a471dc4f4b9 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -15,9 +15,9 @@ DECLARE_RWSEM(pci_bus_sem); /* - * find the upstream PCIE-to-PCI bridge of a PCI device + * find the upstream PCIe-to-PCI bridge of a PCI device * if the device is PCIE, return NULL - * if the device isn't connected to a PCIE bridge (that is its parent is a + * if the device isn't connected to a PCIe bridge (that is its parent is a * legacy PCI bridge and the bridge is directly connected to bus 0), return its * parent */ @@ -37,7 +37,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev) tmp = pdev; continue; } - /* PCI device should connect to a PCIE bridge */ + /* PCI device should connect to a PCIe bridge */ if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) { /* Busted hardware? */ WARN_ON_ONCE(1); -- cgit v1.2.3 From 7e8af37a9a71b479f58d2fd5f0ddaa6780c51f11 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Thu, 3 Dec 2009 18:00:10 +0100 Subject: PCI: change PCI nomenclature in drivers/pci/ (non-comment changes) Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern non-comment parts or anything that might be visible to the user. Signed-off-by: Stefan Assmann Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/Kconfig.debug | 4 ++-- drivers/pci/pcie/aer/aer_inject.c | 2 +- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- drivers/pci/pcie/portdrv_pci.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug index b8c925c1f6aa..9142949734f5 100644 --- a/drivers/pci/pcie/aer/Kconfig.debug +++ b/drivers/pci/pcie/aer/Kconfig.debug @@ -3,14 +3,14 @@ # config PCIEAER_INJECT - tristate "PCIE AER error injector support" + tristate "PCIe AER error injector support" depends on PCIEAER default n help This enables PCI Express Root Port Advanced Error Reporting (AER) software error injector. - Debuging PCIE AER code is quite difficult because it is hard + Debugging PCIe AER code is quite difficult because it is hard to trigger various real hardware errors. Software based error injection can fake almost all kinds of errors with the help of a user space helper tool aer-inject, which can be diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 0cae0f2b353a..797d47809f7a 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -484,5 +484,5 @@ static void __exit aer_inject_exit(void) module_init(aer_inject_init); module_exit(aer_inject_exit); -MODULE_DESCRIPTION("PCIE AER software error injector"); +MODULE_DESCRIPTION("PCIe AER software error injector"); MODULE_LICENSE("GPL"); diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 44acde72294f..9d3e4c8d0184 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) if (info->status == 0) { AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=Unaccessible, " + "PCIe Bus Error: severity=%s, type=Unaccessible, " "id=%04x(Unregistered Agent ID)\n", aer_error_severity_string[info->severity], id); } else { @@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) agent = AER_GET_AGENT(info->severity, info->status); AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n", + "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", aer_error_severity_string[info->severity], aer_error_layer[layer], id, aer_agent_string[agent]); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index a49452e2aed9..34d65172a4d7 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -24,7 +24,7 @@ */ #define DRIVER_VERSION "v1.0" #define DRIVER_AUTHOR "tom.l.nguyen@intel.com" -#define DRIVER_DESC "PCIE Port Bus Driver" +#define DRIVER_DESC "PCIe Port Bus Driver" MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 2d1c861871d767153538a77c498752b36d4bb4b8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 9 Dec 2009 17:52:13 +1100 Subject: PCI/cardbus: Add a fixup hook and fix powerpc The cardbus code creates PCI devices without ever going through the necessary fixup bits and pieces that normal PCI devices go through. There's in fact a commented out call to pcibios_fixup_bus() in there, it's commented because ... it doesn't work. I could make pcibios_fixup_bus() do the right thing on powerpc easily but I felt it cleaner instead to provide a specific hook pci_fixup_cardbus for which a weak empty implementation is provided by the PCI core. This fixes cardbus on powerbooks and probably all other PowerPC platforms which was broken completely for ever on some platforms and since 2.6.31 on others such as PowerBooks when we made the DMA ops mandatory (since those are setup by the fixups). Acked-by: Dominik Brodowski Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- arch/powerpc/kernel/pci-common.c | 13 +++++++++++++ drivers/pci/pci.c | 5 +++++ drivers/pcmcia/cardbus.c | 2 +- include/linux/pci.h | 3 +++ 4 files changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index e8dfdbd9327a..cadbed679fbb 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1107,6 +1107,12 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { struct dev_archdata *sd = &dev->dev.archdata; + /* Cardbus can call us to add new devices to a bus, so ignore + * those who are already fully discovered + */ + if (dev->is_added) + continue; + /* Setup OF node pointer in archdata */ sd->of_node = pci_device_to_OF_node(dev); @@ -1147,6 +1153,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } EXPORT_SYMBOL(pcibios_fixup_bus); +void __devinit pci_fixup_cardbus(struct pci_bus *bus) +{ + /* Now fixup devices on that bus */ + pcibios_setup_bus_devices(bus); +} + + static int skip_isa_ioresource_align(struct pci_dev *dev) { if ((ppc_pci_flags & PPC_PCI_CAN_SKIP_ISA_ALIGN) && diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d50522bf16b1..864e703cf737 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2798,6 +2798,11 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev) return 1; } +void __weak pci_fixup_cardbus(struct pci_bus *bus) +{ +} +EXPORT_SYMBOL(pci_fixup_cardbus); + static int __init pci_setup(char *str) { while (str) { diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c index cdf50f3bc2df..d99f846451a3 100644 --- a/drivers/pcmcia/cardbus.c +++ b/drivers/pcmcia/cardbus.c @@ -222,7 +222,7 @@ int __ref cb_alloc(struct pcmcia_socket *s) unsigned int max, pass; s->functions = pci_scan_slot(bus, PCI_DEVFN(0, 0)); -/* pcibios_fixup_bus(bus); */ + pci_fixup_cardbus(bus); max = bus->secondary; for (pass = 0; pass < 2; pass++) diff --git a/include/linux/pci.h b/include/linux/pci.h index bf1e67080849..5da0690d9cee 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -566,6 +566,9 @@ void pcibios_align_resource(void *, struct resource *, resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); +/* Weak but can be overriden by arch */ +void pci_fixup_cardbus(struct pci_bus *); + /* Generic PCI functions used internally */ extern struct pci_bus *pci_find_bus(int domain, int busnr); -- cgit v1.2.3 From 5b889bf237fca383b5807ad69fde3ad1e2287e42 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 31 Dec 2009 19:06:35 +0100 Subject: PCI: Fix build if quirks are not enabled After commit b9c3b266411d27f1a6466c19d146d08db576bfea ("PCI: support device-specific reset methods") the kernel build is broken if CONFIG_PCI_QUIRKS is unset. Fix this by moving pci_dev_specific_reset() to drivers/pci/quirks.c and providing an empty replacement for !CONFIG_PCI_QUIRKS builds. Signed-off-by: Rafael J. Wysocki Reported-by: Ingo Molnar Signed-off-by: Linus Torvalds --- drivers/pci/pci.c | 15 --------------- drivers/pci/pci.h | 2 +- drivers/pci/quirks.c | 19 ++++++++++++++++++- 3 files changed, 19 insertions(+), 17 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 864e703cf737..0906599ebfde 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2284,21 +2284,6 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) return 0; } -static int pci_dev_specific_reset(struct pci_dev *dev, int probe) -{ - struct pci_dev_reset_methods *i; - - for (i = pci_dev_reset_methods; i->reset; i++) { - if ((i->vendor == dev->vendor || - i->vendor == (u16)PCI_ANY_ID) && - (i->device == dev->device || - i->device == (u16)PCI_ANY_ID)) - return i->reset(dev, probe); - } - - return -ENOTTY; -} - static int pci_dev_reset(struct pci_dev *dev, int probe) { int rc; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 709eaa4fee51..fbd0e3adbca3 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -319,6 +319,6 @@ struct pci_dev_reset_methods { int (*reset)(struct pci_dev *dev, int probe); }; -extern struct pci_dev_reset_methods pci_dev_reset_methods[]; +extern int pci_dev_specific_reset(struct pci_dev *dev, int probe); #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 8726698866b1..5c449fc4db19 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2684,14 +2684,31 @@ static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed -struct pci_dev_reset_methods pci_dev_reset_methods[] = { +static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, reset_intel_82599_sfp_virtfn }, { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, reset_intel_generic_dev }, { 0 } }; + +int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + struct pci_dev_reset_methods *i; + + for (i = pci_dev_reset_methods; i->reset; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->reset(dev, probe); + } + + return -ENOTTY; +} + #else void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} +int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; } #endif EXPORT_SYMBOL(pci_fixup_device); -- cgit v1.2.3 From df9d1e8a4379119cbc47c474f168b5103e404e17 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 31 Dec 2009 16:44:43 -0800 Subject: pci: avoid compiler warning in quirks.c Introduced by commit 5b889bf23 ("PCI: Fix build if quirks are not enabled"), which made the pci_dev_reset_methods[] array static and 'const', but didn't then change the code to match, and use a const pointer when moving it to quirks.c. Trivially fixed by just adding the required 'const' to the iterator variable. Reported-by: Stephen Rothwell Cc: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5c449fc4db19..c74694345b6e 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2694,7 +2694,7 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { int pci_dev_specific_reset(struct pci_dev *dev, int probe) { - struct pci_dev_reset_methods *i; + const struct pci_dev_reset_methods *i; for (i = pci_dev_reset_methods; i->reset; i++) { if ((i->vendor == dev->vendor || -- cgit v1.2.3 From 40da4186a53e59d801130156ecb89fc5830ff227 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Tue, 15 Dec 2009 11:38:04 +0900 Subject: PCI: pcie portdrv: style cleanup No change in logic. Before: drivers/pci/pcie/portdrv_core.c: total: 7 errors, 2 warnings, 508 lines checked drivers/pci/pcie/portdrv_pci.c: total: 4 errors, 2 warnings, 300 lines checked After: drivers/pci/pcie/portdrv_core.c: total: 0 errors, 0 warnings, 506 lines checked drivers/pci/pcie/portdrv_pci.c: total: 0 errors, 0 warnings, 299 lines checked Signed-off-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/pcie/portdrv_core.c | 16 +++++++--------- drivers/pci/pcie/portdrv_pci.c | 17 ++++++++--------- 2 files changed, 15 insertions(+), 18 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 413262eb95b7..b174188ac121 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -27,7 +27,7 @@ */ static void release_pcie_device(struct device *dev) { - kfree(to_pcie_device(dev)); + kfree(to_pcie_device(dev)); } /** @@ -346,12 +346,11 @@ static int suspend_iter(struct device *dev, void *data) { struct pcie_port_service_driver *service_driver; - if ((dev->bus == &pcie_port_bus_type) && - (dev->driver)) { - service_driver = to_service_driver(dev->driver); - if (service_driver->suspend) - service_driver->suspend(to_pcie_device(dev)); - } + if ((dev->bus == &pcie_port_bus_type) && dev->driver) { + service_driver = to_service_driver(dev->driver); + if (service_driver->suspend) + service_driver->suspend(to_pcie_device(dev)); + } return 0; } @@ -494,6 +493,7 @@ int pcie_port_service_register(struct pcie_port_service_driver *new) return driver_register(&new->driver); } +EXPORT_SYMBOL(pcie_port_service_register); /** * pcie_port_service_unregister - unregister PCI Express port service driver @@ -503,6 +503,4 @@ void pcie_port_service_unregister(struct pcie_port_service_driver *drv) { driver_unregister(&drv->driver); } - -EXPORT_SYMBOL(pcie_port_service_register); EXPORT_SYMBOL(pcie_port_service_unregister); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 34d65172a4d7..13c8972886e6 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -63,7 +63,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { * pcie_portdrv_probe - Probe PCI-Express port devices * @dev: PCI-Express port device being probed * - * If detected invokes the pcie_port_device_register() method for + * If detected invokes the pcie_port_device_register() method for * this port device. * */ @@ -78,7 +78,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, (dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))) return -ENODEV; - if (!dev->irq && dev->pin) { + if (!dev->irq && dev->pin) { dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; " "check vendor BIOS\n", dev->vendor, dev->device); } @@ -91,7 +91,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, return 0; } -static void pcie_portdrv_remove (struct pci_dev *dev) +static void pcie_portdrv_remove(struct pci_dev *dev) { pcie_port_device_remove(dev); pci_disable_device(dev); @@ -129,14 +129,13 @@ static int error_detected_iter(struct device *device, void *data) static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev, enum pci_channel_state error) { - struct aer_broadcast_data result_data = - {error, PCI_ERS_RESULT_CAN_RECOVER}; - int retval; + struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER}; + int ret; /* can not fail */ - retval = device_for_each_child(&dev->dev, &result_data, error_detected_iter); + ret = device_for_each_child(&dev->dev, &data, error_detected_iter); - return result_data.result; + return data.result; } static int mmio_enabled_iter(struct device *device, void *data) @@ -290,7 +289,7 @@ static int __init pcie_portdrv_init(void) return retval; } -static void __exit pcie_portdrv_exit(void) +static void __exit pcie_portdrv_exit(void) { pci_unregister_driver(&pcie_portdriver); pcie_port_bus_unregister(); -- cgit v1.2.3 From 46256f83d0d066f99ffde547f27473dfd2a78009 Mon Sep 17 00:00:00 2001 From: "Youquan,Song" Date: Fri, 11 Dec 2009 18:42:35 -0500 Subject: PCI: AER: fix aer inject result in kernel oops If the BIOS does not export _OSC to allow OS take over the PCIe AER, the pcie aer driver will not initialize the aer service. However, the aer_inject driver does not check this scenario, which results in a kernel oops when injecting an aer error into OS. For example: BUG: unable to handle kernel NULL pointer dereference at 0000000000000350 IP: [] _spin_lock_irqsave+0xc/0x23 PGD 155c41067 PUD 157fe0067 PMD 0 Oops: 0002 [#1] SMP Pid: 5119, comm: aer-inject Not tainted 2.6.32-rc8-mce #2 RIP: 0010:[] [] _spin_lock_irqsave+0xc/0x23 RSP: 0018:ffff880157f81e28 EFLAGS: 00010096 RAX: 0000000000000296 RBX: 0000000000000000 RCX: 0000000000000100 RDX: 0000000000010000 RSI: 0000000000000246 RDI: 0000000000000350 RBP: ffff880157f81e28 R08: 0000000000000004 R09: ffff880157f81dac R10: ffff88015a666f60 R11: ffff88015a666f40 R12: ffff88015758cc00 R13: 0000000000000350 R14: 0000000000000000 R15: 0000000000000100 FS: 00007f4d4a66e6f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000350 CR3: 000000015661a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process aer-inject (pid: 5119, threadinfo ffff880157f80000, task ffff8801585f4340) Stack: ffff880157f81e78 ffffffff811b1615 ffff880157f81e78 ffffffff81222823 Call Trace: [] aer_irq+0x38/0x117 [] ? device_for_each_child+0x5f/0x6f [] aer_inject_write+0x409/0x45e [aer_inject] [] vfs_write+0xae/0x16a [] sys_write+0x47/0x6e [] system_call_fastpath+0x16/0x1b RIP [] _spin_lock_irqsave+0xc/0x23 RSP CR2: 0000000000000350 So check the _OSC before assuming that AER is available to the OS. Signed-off-by: Youquan, Song Acked-by: Ying, Huang Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aer_inject.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 797d47809f7a..dd7155a037e7 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -413,8 +413,14 @@ static int aer_inject(struct aer_error_inj *einj) if (ret) goto out_put; - if (find_aer_device(rpdev, &edev)) + if (find_aer_device(rpdev, &edev)) { + if (!get_service_data(edev)) { + printk(KERN_WARNING "AER service is not initialized\n"); + ret = -EINVAL; + goto out_put; + } aer_irq(-1, edev); + } else ret = -EINVAL; out_put: -- cgit v1.2.3 From 6be954d1f91b81ca85c74792b13654069278c577 Mon Sep 17 00:00:00 2001 From: David John Date: Mon, 4 Jan 2010 20:28:57 +0530 Subject: PCI: Check the node argument passed to cpumask_of_node Commit e0cd516 "PCI: derive nearby CPUs from device's instead of bus' NUMA information" causes an null pointer dereference when reading from the sysfs attributes local_cpu* on Intel machines with no ACPI NUMA proximity info, since dev->numa_node gets set to -1 for all PCI devices, which then gets passed to cpumask_of_node. Add a check to prevent this. Signed-off-by: David John Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index c5df94e86678..807224ec8351 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -75,7 +75,8 @@ static ssize_t local_cpus_show(struct device *dev, int len; #ifdef CONFIG_NUMA - mask = cpumask_of_node(dev_to_node(dev)); + mask = (dev_to_node(dev) == -1) ? cpu_online_mask : + cpumask_of_node(dev_to_node(dev)); #else mask = cpumask_of_pcibus(to_pci_dev(dev)->bus); #endif @@ -93,7 +94,8 @@ static ssize_t local_cpulist_show(struct device *dev, int len; #ifdef CONFIG_NUMA - mask = cpumask_of_node(dev_to_node(dev)); + mask = (dev_to_node(dev) == -1) ? cpu_online_mask : + cpumask_of_node(dev_to_node(dev)); #else mask = cpumask_of_pcibus(to_pci_dev(dev)->bus); #endif -- cgit v1.2.3 From 1ae861e652b5457e7fa98ccbc55abea1e207916e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 31 Dec 2009 12:15:54 +0100 Subject: PCI/PM: Use per-device D3 delays It turns out that some PCI devices require extra delays when changing power state from D3 to D0 (and the other way around). Although this is against the PCI specification, we can handle it quite easily by allowing drivers to define arbitrary D3 delays for devices known to require extra time for switching power states. Introduce additional field d3_delay in struct pci_dev and use it to store the value of the device's D0->D3 delay, in miliseconds. Make the PCI PM core code use the per-device d3_delay unless pci_pm_d3_delay is greater (in which case the latter is used). [This also allows the driver to specify d3_delay shorter than the 10 ms required by the PCI standard if the device is known to be able to handle that.] Make the sky2 driver set d3_delay to 150 for devices handled by it. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14730 which is a listed regression from 2.6.30. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/net/sky2.c | 1 + drivers/pci/pci.c | 19 +++++++++++++++---- include/linux/pci.h | 1 + 3 files changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1c01b96c9611..2d28d58200d0 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4684,6 +4684,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, INIT_WORK(&hw->restart_work, sky2_restart); pci_set_drvdata(pdev, hw); + pdev->d3_delay = 150; return 0; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 0906599ebfde..315fea47e784 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -29,7 +29,17 @@ const char *pci_power_names[] = { }; EXPORT_SYMBOL_GPL(pci_power_names); -unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; +unsigned int pci_pm_d3_delay; + +static void pci_dev_d3_sleep(struct pci_dev *dev) +{ + unsigned int delay = dev->d3_delay; + + if (delay < pci_pm_d3_delay) + delay = pci_pm_d3_delay; + + msleep(delay); +} #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -522,7 +532,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(PCI_PM_D2_DELAY); @@ -1409,6 +1419,7 @@ void pci_pm_init(struct pci_dev *dev) } dev->pm_cap = pm; + dev->d3_delay = PCI_PM_D3_WAIT; dev->d1_support = false; dev->d2_support = false; @@ -2247,12 +2258,12 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D3hot; pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D0; pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); return 0; } diff --git a/include/linux/pci.h b/include/linux/pci.h index 5da0690d9cee..174e5392e51e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -243,6 +243,7 @@ struct pci_dev { unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ unsigned int wakeup_prepared:1; + unsigned int d3_delay; /* D3->D0 transition time in ms */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ -- cgit v1.2.3 From b49bfd32901625e4adcfee011d2b32a43b4db67d Mon Sep 17 00:00:00 2001 From: "Youquan,Song" Date: Thu, 17 Dec 2009 08:22:48 -0500 Subject: PCIe AER: prevent AER injection if hardware masks error reporting The Correcteable/Uncorrectable Error Mask Registers are used by PCIe AER driver which will controls the reporting of individual errors to PCIe RC via PCIe error messages. If hardware masks special error reporting to RC, the aer_inject driver should not inject aer error. Acked-by: Andi Kleen Signed-off-by: Youquan, Song Acked-by: Ying, Huang Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aer_inject.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index dd7155a037e7..8c30a9544d61 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj) unsigned long flags; unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn); int pos_cap_err, rp_pos_cap_err; - u32 sever; + u32 sever, mask; int ret = 0; dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn); @@ -374,6 +374,24 @@ static int aer_inject(struct aer_error_inj *einj) err->header_log2 = einj->header_log2; err->header_log3 = einj->header_log3; + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask); + if (einj->cor_status && !(einj->cor_status & ~mask)) { + ret = -EINVAL; + printk(KERN_WARNING "The correctable error(s) is masked " + "by device\n"); + spin_unlock_irqrestore(&inject_lock, flags); + goto out_put; + } + + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask); + if (einj->uncor_status && !(einj->uncor_status & ~mask)) { + ret = -EINVAL; + printk(KERN_WARNING "The uncorrectable error(s) is masked " + "by device\n"); + spin_unlock_irqrestore(&inject_lock, flags); + goto out_put; + } + rperr = __find_aer_error_by_dev(rpdev); if (!rperr) { rperr = rperr_alloc; -- cgit v1.2.3 From bd1f46deba615971a58193afd0202878cadf19a7 Mon Sep 17 00:00:00 2001 From: Andrew Patterson Date: Fri, 22 Jan 2010 14:06:53 -0700 Subject: PCI: fix nested spinlock hang in aer_inject The aer_inject module hangs in aer_inject() when checking the device's error masks. The hang is due to a recursive use of the aer_inject lock. The aer_inject() routine grabs the lock while processing the error and then calls pci_read_config_dword to read the masks. The pci_read_config_dword routine is earlier overridden by pci_read_aer, which among other things, grabs the aer_inject lock. Fixed by moving the pci_read_config_dword calls to read the masks to before the lock is taken. Acked-by: Huang Ying Signed-off-by: Andrew Patterson Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aer_inject.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 8c30a9544d61..223052b73563 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj) unsigned long flags; unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn); int pos_cap_err, rp_pos_cap_err; - u32 sever, mask; + u32 sever, cor_mask, uncor_mask; int ret = 0; dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn); @@ -339,6 +339,9 @@ static int aer_inject(struct aer_error_inj *einj) goto out_put; } pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever); + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask); + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, + &uncor_mask); rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR); if (!rp_pos_cap_err) { @@ -374,17 +377,14 @@ static int aer_inject(struct aer_error_inj *einj) err->header_log2 = einj->header_log2; err->header_log3 = einj->header_log3; - pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask); - if (einj->cor_status && !(einj->cor_status & ~mask)) { + if (einj->cor_status && !(einj->cor_status & ~cor_mask)) { ret = -EINVAL; printk(KERN_WARNING "The correctable error(s) is masked " "by device\n"); spin_unlock_irqrestore(&inject_lock, flags); goto out_put; } - - pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask); - if (einj->uncor_status && !(einj->uncor_status & ~mask)) { + if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) { ret = -EINVAL; printk(KERN_WARNING "The uncorrectable error(s) is masked " "by device\n"); -- cgit v1.2.3 From 439913fffd39374c3737186b22d2d56c3a0ae526 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 28 Jan 2010 10:53:19 +0800 Subject: ACPI: replace acpi_integer by u64 acpi_integer is now obsolete and removed from the ACPICA code base, replaced by u64. Signed-off-by: Lin Ming Signed-off-by: Len Brown --- arch/ia64/hp/common/aml_nfw.c | 6 ++--- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 6 ++--- drivers/acpi/battery.c | 4 +-- drivers/acpi/ec.c | 4 +-- drivers/acpi/glue.c | 4 +-- drivers/acpi/osl.c | 4 +-- drivers/acpi/power_meter.c | 30 +++++++++++----------- drivers/acpi/processor_idle.c | 2 +- drivers/acpi/processor_throttling.c | 24 +++++++++--------- drivers/acpi/utils.c | 16 ++++++------ drivers/acpi/video.c | 2 +- drivers/ata/libata-acpi.c | 4 +-- drivers/ide/ide-acpi.c | 8 +++--- drivers/input/misc/atlas_btns.c | 2 +- drivers/pci/pci-acpi.c | 2 +- drivers/platform/x86/toshiba_bluetooth.c | 4 +-- drivers/platform/x86/wmi.c | 4 +-- include/acpi/acpi_bus.h | 6 ++--- include/acpi/processor.h | 42 +++++++++++++++---------------- 19 files changed, 87 insertions(+), 87 deletions(-) (limited to 'drivers/pci') diff --git a/arch/ia64/hp/common/aml_nfw.c b/arch/ia64/hp/common/aml_nfw.c index 4abd2c79bb1d..22078486d35d 100644 --- a/arch/ia64/hp/common/aml_nfw.c +++ b/arch/ia64/hp/common/aml_nfw.c @@ -77,7 +77,7 @@ static void aml_nfw_execute(struct ia64_nfw_context *c) c->arg[4], c->arg[5], c->arg[6], c->arg[7]); } -static void aml_nfw_read_arg(u8 *offset, u32 bit_width, acpi_integer *value) +static void aml_nfw_read_arg(u8 *offset, u32 bit_width, u64 *value) { switch (bit_width) { case 8: @@ -95,7 +95,7 @@ static void aml_nfw_read_arg(u8 *offset, u32 bit_width, acpi_integer *value) } } -static void aml_nfw_write_arg(u8 *offset, u32 bit_width, acpi_integer *value) +static void aml_nfw_write_arg(u8 *offset, u32 bit_width, u64 *value) { switch (bit_width) { case 8: @@ -114,7 +114,7 @@ static void aml_nfw_write_arg(u8 *offset, u32 bit_width, acpi_integer *value) } static acpi_status aml_nfw_handler(u32 function, acpi_physical_address address, - u32 bit_width, acpi_integer *value, void *handler_context, + u32 bit_width, u64 *value, void *handler_context, void *region_context) { struct ia64_nfw_context *context = handler_context; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index f125e5c551c0..55d42bc443e8 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -806,7 +806,7 @@ static int find_psb_table(struct powernow_k8_data *data) static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { - acpi_integer control; + u64 control; if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) return; @@ -824,7 +824,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { struct cpufreq_frequency_table *powernow_table; int ret_val = -ENODEV; - acpi_integer control, status; + u64 control, status; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { dprintk("register performance failed: bad ACPI data\n"); @@ -948,7 +948,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, u32 fid; u32 vid; u32 freq, index; - acpi_integer status, control; + u64 status, control; if (data->exttype) { status = data->acpi_data.states[i].status; diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index cada73ffdfa7..58d2c91ba62b 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -324,8 +324,8 @@ static int extract_package(struct acpi_battery *battery, strncpy(ptr, element->string.pointer, 32); else if (element->type == ACPI_TYPE_INTEGER) { strncpy(ptr, (u8 *)&element->integer.value, - sizeof(acpi_integer)); - ptr[sizeof(acpi_integer)] = 0; + sizeof(u64)); + ptr[sizeof(u64)] = 0; } else *ptr = 0; /* don't have value */ } else { diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index d6471bb6852f..748ced85dec5 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -589,7 +589,7 @@ static u32 acpi_ec_gpe_handler(void *data) static acpi_status acpi_ec_space_handler(u32 function, acpi_physical_address address, - u32 bits, acpi_integer *value, + u32 bits, u64 *value, void *handler_context, void *region_context) { struct acpi_ec *ec = handler_context; @@ -620,7 +620,7 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, ++address; if (function == ACPI_READ) { result = acpi_ec_read(ec, address, &temp); - (*value) |= ((acpi_integer)temp) << i; + (*value) |= ((u64)temp) << i; } else { temp = 0xff & ((*value) >> i); result = acpi_ec_write(ec, address, temp); diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 4c8fcff662cf..6d5b64b7d526 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -87,7 +87,7 @@ static int acpi_find_bridge_device(struct device *dev, acpi_handle * handle) /* Get device's handler per its address under its parent */ struct acpi_find_child { acpi_handle handle; - acpi_integer address; + u64 address; }; static acpi_status @@ -106,7 +106,7 @@ do_acpi_find_child(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; } -acpi_handle acpi_get_child(acpi_handle parent, acpi_integer address) +acpi_handle acpi_get_child(acpi_handle parent, u64 address) { struct acpi_find_child find = { NULL, address }; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 02e8464e480f..8e6d8665f0ae 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -436,7 +436,7 @@ acpi_status acpi_os_remove_interrupt_handler(u32 irq, acpi_osd_handler handler) * Running in interpreter thread context, safe to sleep */ -void acpi_os_sleep(acpi_integer ms) +void acpi_os_sleep(u64 ms) { schedule_timeout_interruptible(msecs_to_jiffies(ms)); } @@ -603,7 +603,7 @@ acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg, acpi_status acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg, - acpi_integer value, u32 width) + u64 value, u32 width) { int result, size; diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index dc4ffadf8122..834c5af0de4b 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -71,17 +71,17 @@ static const struct acpi_device_id power_meter_ids[] = { MODULE_DEVICE_TABLE(acpi, power_meter_ids); struct acpi_power_meter_capabilities { - acpi_integer flags; - acpi_integer units; - acpi_integer type; - acpi_integer accuracy; - acpi_integer sampling_time; - acpi_integer min_avg_interval; - acpi_integer max_avg_interval; - acpi_integer hysteresis; - acpi_integer configurable_cap; - acpi_integer min_cap; - acpi_integer max_cap; + u64 flags; + u64 units; + u64 type; + u64 accuracy; + u64 sampling_time; + u64 min_avg_interval; + u64 max_avg_interval; + u64 hysteresis; + u64 configurable_cap; + u64 min_cap; + u64 max_cap; }; struct acpi_power_meter_resource { @@ -93,9 +93,9 @@ struct acpi_power_meter_resource { acpi_string model_number; acpi_string serial_number; acpi_string oem_info; - acpi_integer power; - acpi_integer cap; - acpi_integer avg_interval; + u64 power; + u64 cap; + u64 avg_interval; int sensors_valid; unsigned long sensors_last_updated; struct sensor_device_attribute sensors[NUM_SENSORS]; @@ -402,7 +402,7 @@ static ssize_t show_val(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct acpi_device *acpi_dev = to_acpi_device(dev); struct acpi_power_meter_resource *resource = acpi_dev->driver_data; - acpi_integer val = 0; + u64 val = 0; switch (attr->index) { case 0: diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 7c0441f63b39..3455d7abf5f3 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -352,7 +352,7 @@ static int acpi_processor_get_power_info_default(struct acpi_processor *pr) static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) { acpi_status status = 0; - acpi_integer count; + u64 count; int current_count; int i; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 1c5d7a8b2fdf..7ded7542fc9d 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -660,7 +660,7 @@ static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr) #ifdef CONFIG_X86 static int acpi_throttling_rdmsr(struct acpi_processor *pr, - acpi_integer * value) + u64 *value) { struct cpuinfo_x86 *c; u64 msr_high, msr_low; @@ -681,13 +681,13 @@ static int acpi_throttling_rdmsr(struct acpi_processor *pr, rdmsr_safe(MSR_IA32_THERM_CONTROL, (u32 *)&msr_low , (u32 *) &msr_high); msr = (msr_high << 32) | msr_low; - *value = (acpi_integer) msr; + *value = (u64) msr; ret = 0; } return ret; } -static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) +static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value) { struct cpuinfo_x86 *c; unsigned int cpu; @@ -711,14 +711,14 @@ static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) } #else static int acpi_throttling_rdmsr(struct acpi_processor *pr, - acpi_integer * value) + u64 *value) { printk(KERN_ERR PREFIX "HARDWARE addr space,NOT supported yet\n"); return -1; } -static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) +static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value) { printk(KERN_ERR PREFIX "HARDWARE addr space,NOT supported yet\n"); @@ -727,7 +727,7 @@ static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) #endif static int acpi_read_throttling_status(struct acpi_processor *pr, - acpi_integer *value) + u64 *value) { u32 bit_width, bit_offset; u64 ptc_value; @@ -746,7 +746,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, address, (u32 *) &ptc_value, (u32) (bit_width + bit_offset)); ptc_mask = (1 << bit_width) - 1; - *value = (acpi_integer) ((ptc_value >> bit_offset) & ptc_mask); + *value = (u64) ((ptc_value >> bit_offset) & ptc_mask); ret = 0; break; case ACPI_ADR_SPACE_FIXED_HARDWARE: @@ -760,7 +760,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, } static int acpi_write_throttling_state(struct acpi_processor *pr, - acpi_integer value) + u64 value) { u32 bit_width, bit_offset; u64 ptc_value; @@ -793,7 +793,7 @@ static int acpi_write_throttling_state(struct acpi_processor *pr, } static int acpi_get_throttling_state(struct acpi_processor *pr, - acpi_integer value) + u64 value) { int i; @@ -808,7 +808,7 @@ static int acpi_get_throttling_state(struct acpi_processor *pr, } static int acpi_get_throttling_value(struct acpi_processor *pr, - int state, acpi_integer *value) + int state, u64 *value) { int ret = -1; @@ -826,7 +826,7 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) { int state = 0; int ret; - acpi_integer value; + u64 value; if (!pr) return -EINVAL; @@ -993,7 +993,7 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, int state, bool force) { int ret; - acpi_integer value; + u64 value; if (!pr) return -EINVAL; diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 811fec10462b..11882dbe2094 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -107,12 +107,12 @@ acpi_extract_package(union acpi_object *package, case ACPI_TYPE_INTEGER: switch (format_string[i]) { case 'N': - size_required += sizeof(acpi_integer); - tail_offset += sizeof(acpi_integer); + size_required += sizeof(u64); + tail_offset += sizeof(u64); break; case 'S': size_required += - sizeof(char *) + sizeof(acpi_integer) + + sizeof(char *) + sizeof(u64) + sizeof(char); tail_offset += sizeof(char *); break; @@ -193,17 +193,17 @@ acpi_extract_package(union acpi_object *package, case ACPI_TYPE_INTEGER: switch (format_string[i]) { case 'N': - *((acpi_integer *) head) = + *((u64 *) head) = element->integer.value; - head += sizeof(acpi_integer); + head += sizeof(u64); break; case 'S': pointer = (u8 **) head; *pointer = tail; - *((acpi_integer *) tail) = + *((u64 *) tail) = element->integer.value; - head += sizeof(acpi_integer *); - tail += sizeof(acpi_integer); + head += sizeof(u64 *); + tail += sizeof(u64); /* NULL terminate string */ *tail = (char)0; tail += sizeof(char); diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index b765790b32be..6e9b49149fce 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -759,7 +759,7 @@ acpi_video_bus_POST_options(struct acpi_video_bus *video, static int acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) { - acpi_integer status = 0; + u64 status = 0; union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list args = { 1, &arg0 }; diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 1245838ac13d..292fdbc0431a 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -64,7 +64,7 @@ void ata_acpi_associate_sata_port(struct ata_port *ap) WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA)); if (!sata_pmp_attached(ap)) { - acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT); + u64 adr = SATA_ADR(ap->port_no, NO_PORT_MULT); ap->link.device->acpi_handle = acpi_get_child(ap->host->acpi_handle, adr); @@ -74,7 +74,7 @@ void ata_acpi_associate_sata_port(struct ata_port *ap) ap->link.device->acpi_handle = NULL; ata_for_each_link(link, ap, EDGE) { - acpi_integer adr = SATA_ADR(ap->port_no, link->pmp); + u64 adr = SATA_ADR(ap->port_no, link->pmp); link->device->acpi_handle = acpi_get_child(ap->host->acpi_handle, adr); diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index c0cf45a11b93..5cb01e5c323c 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -108,11 +108,11 @@ bool ide_port_acpi(ide_hwif_t *hwif) * Returns 0 on success, <0 on error. */ static int ide_get_dev_handle(struct device *dev, acpi_handle *handle, - acpi_integer *pcidevfn) + u64 *pcidevfn) { struct pci_dev *pdev = to_pci_dev(dev); unsigned int bus, devnum, func; - acpi_integer addr; + u64 addr; acpi_handle dev_handle; acpi_status status; struct acpi_device_info *dinfo = NULL; @@ -122,7 +122,7 @@ static int ide_get_dev_handle(struct device *dev, acpi_handle *handle, devnum = PCI_SLOT(pdev->devfn); func = PCI_FUNC(pdev->devfn); /* ACPI _ADR encoding for PCI bus: */ - addr = (acpi_integer)(devnum << 16 | func); + addr = (u64)(devnum << 16 | func); DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func); @@ -169,7 +169,7 @@ static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif) { struct device *dev = hwif->gendev.parent; acpi_handle uninitialized_var(dev_handle); - acpi_integer pcidevfn; + u64 pcidevfn; acpi_handle chan_handle; int err; diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c index 1b871917340a..dfaa9a045ed8 100644 --- a/drivers/input/misc/atlas_btns.c +++ b/drivers/input/misc/atlas_btns.c @@ -47,7 +47,7 @@ static acpi_status acpi_atlas_button_setup(acpi_handle region_handle, static acpi_status acpi_atlas_button_handler(u32 function, acpi_physical_address address, - u32 bit_width, acpi_integer *value, + u32 bit_width, u64 *value, void *handler_context, void *region_context) { acpi_status status; diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 7e2829538a4c..441326c44138 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -143,7 +143,7 @@ static struct pci_platform_pm_ops acpi_pci_platform_pm = { static int acpi_pci_find_device(struct device *dev, acpi_handle *handle) { struct pci_dev * pci_dev; - acpi_integer addr; + u64 addr; pci_dev = to_pci_dev(dev); /* Please ref to ACPI spec for the syntax of _ADR */ diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c index a350418e87ea..944068611919 100644 --- a/drivers/platform/x86/toshiba_bluetooth.c +++ b/drivers/platform/x86/toshiba_bluetooth.c @@ -57,7 +57,7 @@ static struct acpi_driver toshiba_bt_rfkill_driver = { static int toshiba_bluetooth_enable(acpi_handle handle) { acpi_status res1, res2; - acpi_integer result; + u64 result; /* * Query ACPI to verify RFKill switch is set to 'on'. @@ -95,7 +95,7 @@ static int toshiba_bt_resume(struct acpi_device *device) static int toshiba_bt_rfkill_add(struct acpi_device *device) { acpi_status status; - acpi_integer bt_present; + u64 bt_present; int result = -ENODEV; /* diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index b104302fea0a..09e9918c69c1 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -796,7 +796,7 @@ static __init acpi_status parse_wdg(acpi_handle handle) */ static acpi_status acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address, - u32 bits, acpi_integer * value, + u32 bits, u64 *value, void *handler_context, void *region_context) { int result = 0, i = 0; @@ -813,7 +813,7 @@ acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address, if (function == ACPI_READ) { result = ec_read(address, &temp); - (*value) |= ((acpi_integer)temp) << i; + (*value) |= ((u64)temp) << i; } else { temp = 0xff & ((*value) >> i); result = ec_write(address, temp); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 3cd9ccdcbd8f..71c105c9b0ee 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -250,8 +250,8 @@ struct acpi_device_wakeup_state { struct acpi_device_wakeup { acpi_handle gpe_device; - acpi_integer gpe_number; - acpi_integer sleep_state; + u64 gpe_number; + u64 sleep_state; struct acpi_handle_list resources; struct acpi_device_wakeup_state state; struct acpi_device_wakeup_flags flags; @@ -380,7 +380,7 @@ struct acpi_pci_root { }; /* helper */ -acpi_handle acpi_get_child(acpi_handle, acpi_integer); +acpi_handle acpi_get_child(acpi_handle, u64); int acpi_is_root_bridge(acpi_handle); acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle); diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 0ea5ef4eb6a9..29831768c0e6 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -92,11 +92,11 @@ struct acpi_processor_power { /* Performance Management */ struct acpi_psd_package { - acpi_integer num_entries; - acpi_integer revision; - acpi_integer domain; - acpi_integer coord_type; - acpi_integer num_processors; + u64 num_entries; + u64 revision; + u64 domain; + u64 coord_type; + u64 num_processors; } __attribute__ ((packed)); struct acpi_pct_register { @@ -110,12 +110,12 @@ struct acpi_pct_register { } __attribute__ ((packed)); struct acpi_processor_px { - acpi_integer core_frequency; /* megahertz */ - acpi_integer power; /* milliWatts */ - acpi_integer transition_latency; /* microseconds */ - acpi_integer bus_master_latency; /* microseconds */ - acpi_integer control; /* control value */ - acpi_integer status; /* success indicator */ + u64 core_frequency; /* megahertz */ + u64 power; /* milliWatts */ + u64 transition_latency; /* microseconds */ + u64 bus_master_latency; /* microseconds */ + u64 control; /* control value */ + u64 status; /* success indicator */ }; struct acpi_processor_performance { @@ -133,11 +133,11 @@ struct acpi_processor_performance { /* Throttling Control */ struct acpi_tsd_package { - acpi_integer num_entries; - acpi_integer revision; - acpi_integer domain; - acpi_integer coord_type; - acpi_integer num_processors; + u64 num_entries; + u64 revision; + u64 domain; + u64 coord_type; + u64 num_processors; } __attribute__ ((packed)); struct acpi_ptc_register { @@ -151,11 +151,11 @@ struct acpi_ptc_register { } __attribute__ ((packed)); struct acpi_processor_tx_tss { - acpi_integer freqpercentage; /* */ - acpi_integer power; /* milliWatts */ - acpi_integer transition_latency; /* microseconds */ - acpi_integer control; /* control value */ - acpi_integer status; /* success indicator */ + u64 freqpercentage; /* */ + u64 power; /* milliWatts */ + u64 transition_latency; /* microseconds */ + u64 control; /* control value */ + u64 status; /* success indicator */ }; struct acpi_processor_tx { u16 power; -- cgit v1.2.3 From bb209c8287d2d55ec4a67e3933346e0a3ee0da76 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:03 +0000 Subject: powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() We are missing these when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt Acked-by: Jesse Barnes --- arch/powerpc/kernel/pci_of_scan.c | 2 ++ drivers/pci/probe.c | 4 ++-- include/linux/pci.h | 4 ++++ 3 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 7311fdfb9bf8..693eb9a25bfa 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -140,6 +140,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->devfn = devfn; dev->multifunction = 0; /* maybe a lie? */ dev->needs_freset = 0; /* pcie fundamental reset required */ + set_pcie_port_type(dev); dev->vendor = get_int_prop(node, "vendor-id", 0xffff); dev->device = get_int_prop(node, "device-id", 0xffff); @@ -164,6 +165,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, /* a PCI-PCI bridge */ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; dev->rom_base_reg = PCI_ROM_ADDRESS1; + set_pcie_hotplug_bridge(dev); } else if (!strcmp(type, "cardbus")) { dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; } else { diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 98ffb2de22e9..446e4a94d7d3 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -681,7 +681,7 @@ static void pci_read_irq(struct pci_dev *dev) dev->irq = irq; } -static void set_pcie_port_type(struct pci_dev *pdev) +void set_pcie_port_type(struct pci_dev *pdev) { int pos; u16 reg16; @@ -695,7 +695,7 @@ static void set_pcie_port_type(struct pci_dev *pdev) pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4; } -static void set_pcie_hotplug_bridge(struct pci_dev *pdev) +void set_pcie_hotplug_bridge(struct pci_dev *pdev) { int pos; u16 reg16; diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..c1968f464c38 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -756,6 +756,10 @@ pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +/* For use by arch with custom probe code */ +void set_pcie_port_type(struct pci_dev *pdev); +void set_pcie_hotplug_bridge(struct pci_dev *pdev); + /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG -- cgit v1.2.3 From 7779688fc3d1ceddad84846a7b0affbe8e78ec6e Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 29 Jan 2010 17:48:52 +0100 Subject: ACPI: acpi_bus_{scan,bus,add}: return -ENODEV if no device was found Callers (acpi_memhotplug.c, dock.c and others) check for the return value of acpi_bus_add() and assume a valid device was returned in case zero was returned. Thus return -ENODEV if no device was found in acpi_bus_scan and propagate this through acpi_bus_add and acpi_bus_start. Also remove a confusing comment in acpiphp_glue.c, acpi_bus_scan will and cannot invoke if acpi_bus_add returns no valid device. Signed-off-by: Thomas Renninger Acked-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/scan.c | 24 +++++++++++++++++++----- drivers/pci/hotplug/acpiphp_glue.c | 6 ------ 2 files changed, 19 insertions(+), 11 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8044583f3034..3e009674f333 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1336,9 +1336,25 @@ static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops, if (child) *child = device; - return 0; + + if (device) + return 0; + else + return -ENODEV; } +/* + * acpi_bus_add and acpi_bus_start + * + * scan a given ACPI tree and (probably recently hot-plugged) + * create and add or starts found devices. + * + * If no devices were found -ENODEV is returned which does not + * mean that this is a real error, there just have been no suitable + * ACPI objects in the table trunk from which the kernel could create + * a device and add/start an appropriate driver. + */ + int acpi_bus_add(struct acpi_device **child, struct acpi_device *parent, acpi_handle handle, int type) @@ -1348,8 +1364,7 @@ acpi_bus_add(struct acpi_device **child, memset(&ops, 0, sizeof(ops)); ops.acpi_op_add = 1; - acpi_bus_scan(handle, &ops, child); - return 0; + return acpi_bus_scan(handle, &ops, child); } EXPORT_SYMBOL(acpi_bus_add); @@ -1363,8 +1378,7 @@ int acpi_bus_start(struct acpi_device *device) memset(&ops, 0, sizeof(ops)); ops.acpi_op_start = 1; - acpi_bus_scan(device->handle, &ops, NULL); - return 0; + return acpi_bus_scan(device->handle, &ops, NULL); } EXPORT_SYMBOL(acpi_bus_start); diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 8e952fdab764..cb2fd01eddae 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -720,12 +720,6 @@ static int acpiphp_bus_add(struct acpiphp_func *func) -ret_val); goto acpiphp_bus_add_out; } - /* - * try to start anyway. We could have failed to add - * simply because this bus had previously been added - * on another add. Don't bother with the return value - * we just keep going. - */ ret_val = acpi_bus_start(device); acpiphp_bus_add_out: -- cgit v1.2.3 From 73d2eaac8a3f1ec1d6d0a80ea7302a439ca9b933 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 5 Feb 2010 01:42:43 -0500 Subject: CS5536: apply pci quirk for BIOS SMBUS bug The new cs5535-* drivers use PCI header config info rather than MSRs to determine the memory region to use for things like GPIOs and MFGPTs. As anticipated, we've run into a buggy BIOS: [ 0.081818] pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] [ 0.081906] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] [ 0.082015] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] [ 0.082917] pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] [ 0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff] [ 0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff] [ 0.088816] PCI: pci_cache_line_size set to 32 bytes [ 0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use [ 0.089052] pci 0000:00:14.0: can't reserve [io 0x6100-0x61ff] This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge device's BAR0 to 8k. In reality, it should be 8 bytes (BAR0 is used for SMBus stuff). This quirk checks for an incorrect size, and resets it accordingly. Signed-off-by: Andres Salomon Tested-by: Leigh Porter Tested-by: Jens Rottmann Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index c74694345b6e..d58b94030ef3 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -338,6 +338,23 @@ static void __devinit quirk_s3_64M(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); +/* + * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS + * ver. 1.33 20070103) don't set the correct ISA PCI region header info. + * BAR0 should be 8 bytes; instead, it may be set to something like 8k + * (which conflicts w/ BAR1's memory range). + */ +static void __devinit quirk_cs5536_vsa(struct pci_dev *dev) +{ + if (pci_resource_len(dev, 0) != 8) { + struct resource *res = &dev->resource[0]; + res->end = res->start + 8 - 1; + dev_info(&dev->dev, "CS5536 ISA bridge bug detected " + "(incorrect header); workaround applied.\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); + static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr, const char *name) { -- cgit v1.2.3 From 95a8b6efc5d07103583f706c8a5889437d537939 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Tue, 2 Feb 2010 14:38:13 -0800 Subject: pci: Update pci_set_vga_state() to call arch functions Update pci_set_vga_state to call arch dependent functions to enable Legacy VGA I/O transactions to be redirected to correct target. [akpm@linux-foundation.org: make pci_register_set_vga_state() __init] Signed-off-by: Mike Travis LKML-Reference: <201002022238.o12McE1J018723@imap1.linux-foundation.org> Cc: Thomas Gleixner Cc: Robin Holt Cc: Jack Steiner Cc: Ingo Molnar Cc: Jesse Barnes Cc: David Airlie Signed-off-by: Andrew Morton Signed-off-by: H. Peter Anvin --- drivers/pci/pci.c | 25 ++++++++++++++++++++++++- include/linux/pci.h | 5 +++++ 2 files changed, 29 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 315fea47e784..ac2a576133f9 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2615,6 +2615,23 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) return 0; } +/* Some architectures require additional programming to enable VGA */ +static arch_set_vga_state_t arch_set_vga_state; + +void __init pci_register_set_vga_state(arch_set_vga_state_t func) +{ + arch_set_vga_state = func; /* NULL disables */ +} + +static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, + unsigned int command_bits, bool change_bridge) +{ + if (arch_set_vga_state) + return arch_set_vga_state(dev, decode, command_bits, + change_bridge); + return 0; +} + /** * pci_set_vga_state - set VGA decode state on device and parents if requested * @dev: the PCI device @@ -2628,9 +2645,15 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode, struct pci_bus *bus; struct pci_dev *bridge; u16 cmd; + int rc; WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)); + /* ARCH specific VGA enables */ + rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge); + if (rc) + return rc; + pci_read_config_word(dev, PCI_COMMAND, &cmd); if (decode == true) cmd |= command_bits; @@ -2845,6 +2868,7 @@ EXPORT_SYMBOL(pcim_pin_device); EXPORT_SYMBOL(pci_disable_device); EXPORT_SYMBOL(pci_find_capability); EXPORT_SYMBOL(pci_bus_find_capability); +EXPORT_SYMBOL(pci_register_set_vga_state); EXPORT_SYMBOL(pci_release_regions); EXPORT_SYMBOL(pci_request_regions); EXPORT_SYMBOL(pci_request_regions_exclusive); @@ -2877,4 +2901,3 @@ EXPORT_SYMBOL(pci_target_state); EXPORT_SYMBOL(pci_prepare_to_sleep); EXPORT_SYMBOL(pci_back_from_sleep); EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); - diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..5da166e560c2 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -955,6 +955,11 @@ static inline int pci_proc_domain(struct pci_bus *bus) } #endif /* CONFIG_PCI_DOMAINS */ +/* some architectures require additional setup to direct VGA traffic */ +typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode, + unsigned int command_bits, bool change_bridge); +extern void pci_register_set_vga_state(arch_set_vga_state_t func); + #else /* CONFIG_PCI is not enabled */ /* -- cgit v1.2.3 From c85e4aae699360e8db4ebfe710e917ac9b6fc77e Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 10 Feb 2010 17:45:09 -0800 Subject: ibmphp: Rename add_range() to add_bus_range() to avoid conflict Rename add_range() to add_bus_range() to avoid conflict with the naming of the generic range manipulation functions. LKML-Reference: <1265793639-15071-4-git-send-email-yinghai@kernel.org> Cc: Yinghai Lu Cc: Jesse Barnes Cc: Greg Kroah-Hartman Signed-off-by: H. Peter Anvin --- drivers/pci/hotplug/ibmphp_res.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c index ec73294d1fa6..e2dc289f767c 100644 --- a/drivers/pci/hotplug/ibmphp_res.c +++ b/drivers/pci/hotplug/ibmphp_res.c @@ -40,7 +40,7 @@ static void update_resources (struct bus_node *bus_cur, int type, int rangeno); static int once_over (void); static int remove_ranges (struct bus_node *, struct bus_node *); static int update_bridge_ranges (struct bus_node **); -static int add_range (int type, struct range_node *, struct bus_node *); +static int add_bus_range (int type, struct range_node *, struct bus_node *); static void fix_resources (struct bus_node *); static struct bus_node *find_bus_wprev (u8, struct bus_node **, u8); @@ -133,7 +133,7 @@ static int __init alloc_bus_range (struct bus_node **new_bus, struct range_node newrange->rangeno = 1; else { /* need to insert our range */ - add_range (flag, newrange, newbus); + add_bus_range (flag, newrange, newbus); debug ("%d resource Primary Bus inserted on bus %x [%x - %x]\n", flag, newbus->busno, newrange->start, newrange->end); } @@ -384,7 +384,7 @@ int __init ibmphp_rsrc_init (void) * Input: type of the resource, range to add, current bus * Output: 0 or -1, bus and range ptrs ********************************************************************************/ -static int add_range (int type, struct range_node *range, struct bus_node *bus_cur) +static int add_bus_range (int type, struct range_node *range, struct bus_node *bus_cur) { struct range_node *range_cur = NULL; struct range_node *range_prev; @@ -455,7 +455,7 @@ static int add_range (int type, struct range_node *range, struct bus_node *bus_c /******************************************************************************* * This routine goes through the list of resources of type 'type' and updates - * the range numbers that they correspond to. It was called from add_range fnc + * the range numbers that they correspond to. It was called from add_bus_range fnc * * Input: bus, type of the resource, the rangeno starting from which to update ******************************************************************************/ @@ -1999,7 +1999,7 @@ static int __init update_bridge_ranges (struct bus_node **bus) if (bus_sec->noIORanges > 0) { if (!range_exists_already (range, bus_sec, IO)) { - add_range (IO, range, bus_sec); + add_bus_range (IO, range, bus_sec); ++bus_sec->noIORanges; } else { kfree (range); @@ -2048,7 +2048,7 @@ static int __init update_bridge_ranges (struct bus_node **bus) if (bus_sec->noMemRanges > 0) { if (!range_exists_already (range, bus_sec, MEM)) { - add_range (MEM, range, bus_sec); + add_bus_range (MEM, range, bus_sec); ++bus_sec->noMemRanges; } else { kfree (range); @@ -2102,7 +2102,7 @@ static int __init update_bridge_ranges (struct bus_node **bus) if (bus_sec->noPFMemRanges > 0) { if (!range_exists_already (range, bus_sec, PFMEM)) { - add_range (PFMEM, range, bus_sec); + add_bus_range (PFMEM, range, bus_sec); ++bus_sec->noPFMemRanges; } else { kfree (range); -- cgit v1.2.3 From fb8a0d9d1bfd1e4355f307e86a6da7209eefd5f3 Mon Sep 17 00:00:00 2001 From: "Williams, Mitch A" Date: Wed, 10 Feb 2010 01:43:04 +0000 Subject: pci: Add SR-IOV convenience functions and macros Add and export pci_num_vf to allow other subsystems to determine how many virtual function devices are associated with an SR-IOV physical function device. Add macros dev_is_pci, dev_is_ps, and dev_num_vf to make it easier for non-PCI specific code to determine SR-IOV capabilities. Signed-off-by: Mitch Williams Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/pci/iov.c | 15 +++++++++++++++ include/linux/pci.h | 11 +++++++++++ 2 files changed, 26 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index b2a448e19fe6..3e5ab2bf6a5c 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -706,6 +706,21 @@ irqreturn_t pci_sriov_migration(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(pci_sriov_migration); +/** + * pci_num_vf - return number of VFs associated with a PF device_release_driver + * @dev: the PCI device + * + * Returns number of VFs, or 0 if SR-IOV is not enabled. + */ +int pci_num_vf(struct pci_dev *dev) +{ + if (!dev || !dev->is_physfn) + return 0; + else + return dev->sriov->nr_virtfn; +} +EXPORT_SYMBOL_GPL(pci_num_vf); + static int ats_alloc_one(struct pci_dev *dev, int ps) { int pos; diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..59a98e2ee2c6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -612,6 +612,9 @@ extern void pci_remove_bus_device(struct pci_dev *dev); extern void pci_stop_bus_device(struct pci_dev *dev); void pci_setup_cardbus(struct pci_bus *bus); extern void pci_sort_breadthfirst(void); +#define dev_is_pci(d) ((d)->bus == &pci_bus_type) +#define dev_is_pf(d) ((dev_is_pci(d) ? to_pci_dev(d)->is_physfn : false)) +#define dev_num_vf(d) ((dev_is_pci(d) ? pci_num_vf(to_pci_dev(d)) : 0)) /* Generic PCI functions exported to card drivers */ @@ -1129,6 +1132,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn) { return NULL; } +#define dev_is_pci(d) (false) +#define dev_is_pf(d) (false) +#define dev_num_vf(d) (0) #endif /* CONFIG_PCI */ /* Include architecture-dependent settings and functions */ @@ -1286,6 +1292,7 @@ void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar); extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn); extern void pci_disable_sriov(struct pci_dev *dev); extern irqreturn_t pci_sriov_migration(struct pci_dev *dev); +extern int pci_num_vf(struct pci_dev *dev); #else static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) { @@ -1298,6 +1305,10 @@ static inline irqreturn_t pci_sriov_migration(struct pci_dev *dev) { return IRQ_NONE; } +static inline int pci_num_vf(struct pci_dev *dev) +{ + return 0; +} #endif #if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE) -- cgit v1.2.3 From cf4c43dd439b90a1a876b3f836ebe745abb9a269 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 15 Jul 2009 13:13:00 -0700 Subject: PCI: Add pci_bus_find_ext_capability For use by code that needs to walk extended capability lists before pci_dev structures are set up. Signed-off-by: Jesse Barnes LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFD@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan Signed-off-by: H. Peter Anvin --- drivers/pci/pci.c | 43 +++++++++++++++++++++++++++++++++++++++++++ include/linux/pci.h | 2 ++ 2 files changed, 45 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 315fea47e784..aad62af2b4c6 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -297,6 +297,49 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap) } EXPORT_SYMBOL_GPL(pci_find_ext_capability); +/** + * pci_bus_find_ext_capability - find an extended capability + * @bus: the PCI bus to query + * @devfn: PCI device to query + * @cap: capability code + * + * Like pci_find_ext_capability() but works for pci devices that do not have a + * pci_dev structure set up yet. + * + * Returns the address of the requested capability structure within the + * device's PCI configuration space or 0 in case the device does not + * support it. + */ +int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, + int cap) +{ + u32 header; + int ttl; + int pos = PCI_CFG_SPACE_SIZE; + + /* minimum 8 bytes per capability */ + ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8; + + if (!pci_bus_read_config_dword(bus, devfn, pos, &header)) + return 0; + if (header == 0xffffffff || header == 0) + return 0; + + while (ttl-- > 0) { + if (PCI_EXT_CAP_ID(header) == cap) + return pos; + + pos = PCI_EXT_CAP_NEXT(header); + if (pos < PCI_CFG_SPACE_SIZE) + break; + + if (!pci_bus_read_config_dword(bus, devfn, pos, &header)) + break; + } + + return 0; +} + static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap) { int rc, ttl = PCI_FIND_CAP_TTL; diff --git a/include/linux/pci.h b/include/linux/pci.h index c1968f464c38..65f8a8f9d3e5 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -631,6 +631,8 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev); int pci_find_capability(struct pci_dev *dev, int cap); int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap); int pci_find_ext_capability(struct pci_dev *dev, int cap); +int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, + int cap); int pci_find_ht_capability(struct pci_dev *dev, int ht_cap); int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap); struct pci_bus *pci_find_next_bus(const struct pci_bus *from); -- cgit v1.2.3 From 7a0deb6bcda98c2a764cb87f1441eef920fd3663 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 19 Feb 2010 17:57:46 +0000 Subject: pci: add support for 82576NS serdes to existing SR-IOV quirk This patch adds support for the 82576NS Serdes adapter to the existing pci quirk for 82576 parts. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/pci/quirks.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index d58b94030ef3..456c265b1fe9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2534,6 +2534,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150d, quirk_i82576_sriov); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov); #endif /* CONFIG_PCI_IOV */ -- cgit v1.2.3 From f07852d6442c46c50b59c7e2acc8a1b291f9ab6d Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:10:02 -0500 Subject: PCI: Rewrite pci_scan_slot The Alternate Routing-ID Interpretation capability allows a single device to have up to 256 functions. They can be populated sparsely, so the current technique of scanning every eighth function is not guaranteed to find them all. By introducing a 'next_fn' function pointer, we can use the linked list of functions in the ARI capability to scan all the functions which exist. We can then speed up the pci_scan_slot by skipping the scan of subsequent devfns for PCIe devices which are the direct children of Root Ports or Downstream Ports. These devices are only permitted to implement device 0, unless they are ARI devices, in which case they'll be scanned by the ARI code above. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 56 ++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 9 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 446e4a94d7d3..dd64310a735e 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1081,6 +1081,37 @@ struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn) } EXPORT_SYMBOL(pci_scan_single_device); +static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn) +{ + u16 cap; + unsigned pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); + if (!pos) + return 0; + pci_read_config_word(dev, pos + 4, &cap); + return cap >> 8; +} + +static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn) +{ + return (fn + 1) % 8; +} + +static unsigned no_next_fn(struct pci_dev *dev, unsigned fn) +{ + return 0; +} + +static int only_one_child(struct pci_bus *bus) +{ + struct pci_dev *parent = bus->self; + if (!parent || !pci_is_pcie(parent)) + return 0; + if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT || + parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) + return 1; + return 0; +} + /** * pci_scan_slot - scan a PCI slot on a bus for devices. * @bus: PCI bus to scan @@ -1094,21 +1125,28 @@ EXPORT_SYMBOL(pci_scan_single_device); */ int pci_scan_slot(struct pci_bus *bus, int devfn) { - int fn, nr = 0; + unsigned fn, nr = 0; struct pci_dev *dev; + unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn; + + if (only_one_child(bus) && (devfn > 0)) + return 0; /* Already scanned the entire slot */ dev = pci_scan_single_device(bus, devfn); if (dev && !dev->is_added) /* new device? */ nr++; - if (dev && dev->multifunction) { - for (fn = 1; fn < 8; fn++) { - dev = pci_scan_single_device(bus, devfn + fn); - if (dev) { - if (!dev->is_added) - nr++; - dev->multifunction = 1; - } + if (pci_ari_enabled(bus)) + next_fn = next_ari_fn; + else if (dev && dev->multifunction) + next_fn = next_trad_fn; + + for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) { + dev = pci_scan_single_device(bus, devfn + fn); + if (dev) { + if (!dev->is_added) + nr++; + dev->multifunction = 1; } } -- cgit v1.2.3 From 536c8cb49eccd4f753b4782e7e975ef87359cb44 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:31 -0500 Subject: PCI: Unify pcie_link_speed and pci_bus_speed These enums must not overlap anyway, since we only have a single pci_bus_speed_strings array. Use a single enum, and move it to pci.h. Add 'SPEED' to the pcie names to make it clear what they are. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 16 ++++++++-------- include/linux/pci.h | 21 +++++++++++++++++++++ include/linux/pci_hotplug.h | 26 -------------------------- 3 files changed, 29 insertions(+), 34 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 10040d58c8ef..6744ca1d8d01 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -613,7 +613,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value) { struct controller *ctrl = slot->ctrl; - enum pcie_link_speed lnk_speed; + enum pci_bus_speed lnk_speed; u32 lnk_cap; int retval = 0; @@ -625,13 +625,13 @@ int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value) switch (lnk_cap & 0x000F) { case 1: - lnk_speed = PCIE_2_5GB; + lnk_speed = PCIE_SPEED_2_5GT; break; case 2: - lnk_speed = PCIE_5_0GB; + lnk_speed = PCIE_SPEED_5_0GT; break; default: - lnk_speed = PCIE_LNK_SPEED_UNKNOWN; + lnk_speed = PCI_SPEED_UNKNOWN; break; } @@ -694,7 +694,7 @@ int pciehp_get_max_lnk_width(struct slot *slot, int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value) { struct controller *ctrl = slot->ctrl; - enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN; + enum pci_bus_speed lnk_speed = PCI_SPEED_UNKNOWN; int retval = 0; u16 lnk_status; @@ -707,13 +707,13 @@ int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value) switch (lnk_status & PCI_EXP_LNKSTA_CLS) { case 1: - lnk_speed = PCIE_2_5GB; + lnk_speed = PCIE_SPEED_2_5GT; break; case 2: - lnk_speed = PCIE_5_0GB; + lnk_speed = PCIE_SPEED_5_0GT; break; default: - lnk_speed = PCIE_LNK_SPEED_UNKNOWN; + lnk_speed = PCI_SPEED_UNKNOWN; break; } diff --git a/include/linux/pci.h b/include/linux/pci.h index c1968f464c38..d76a8a0b6b53 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -187,6 +187,27 @@ enum pci_bus_flags { PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2, }; +/* Based on the PCI Hotplug Spec, but some values are made up by us */ +enum pci_bus_speed { + PCI_SPEED_33MHz = 0x00, + PCI_SPEED_66MHz = 0x01, + PCI_SPEED_66MHz_PCIX = 0x02, + PCI_SPEED_100MHz_PCIX = 0x03, + PCI_SPEED_133MHz_PCIX = 0x04, + PCI_SPEED_66MHz_PCIX_ECC = 0x05, + PCI_SPEED_100MHz_PCIX_ECC = 0x06, + PCI_SPEED_133MHz_PCIX_ECC = 0x07, + PCI_SPEED_66MHz_PCIX_266 = 0x09, + PCI_SPEED_100MHz_PCIX_266 = 0x0a, + PCI_SPEED_133MHz_PCIX_266 = 0x0b, + PCI_SPEED_66MHz_PCIX_533 = 0x11, + PCI_SPEED_100MHz_PCIX_533 = 0x12, + PCI_SPEED_133MHz_PCIX_533 = 0x13, + PCIE_SPEED_2_5GT = 0x14, + PCIE_SPEED_5_0GT = 0x15, + PCI_SPEED_UNKNOWN = 0xff, +}; + struct pci_cap_saved_state { struct hlist_node next; char cap_nr; diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 652ba797696d..56251ac385e9 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -28,26 +28,6 @@ #ifndef _PCI_HOTPLUG_H #define _PCI_HOTPLUG_H - -/* These values come from the PCI Hotplug Spec */ -enum pci_bus_speed { - PCI_SPEED_33MHz = 0x00, - PCI_SPEED_66MHz = 0x01, - PCI_SPEED_66MHz_PCIX = 0x02, - PCI_SPEED_100MHz_PCIX = 0x03, - PCI_SPEED_133MHz_PCIX = 0x04, - PCI_SPEED_66MHz_PCIX_ECC = 0x05, - PCI_SPEED_100MHz_PCIX_ECC = 0x06, - PCI_SPEED_133MHz_PCIX_ECC = 0x07, - PCI_SPEED_66MHz_PCIX_266 = 0x09, - PCI_SPEED_100MHz_PCIX_266 = 0x0a, - PCI_SPEED_133MHz_PCIX_266 = 0x0b, - PCI_SPEED_66MHz_PCIX_533 = 0x11, - PCI_SPEED_100MHz_PCIX_533 = 0x12, - PCI_SPEED_133MHz_PCIX_533 = 0x13, - PCI_SPEED_UNKNOWN = 0xff, -}; - /* These values come from the PCI Express Spec */ enum pcie_link_width { PCIE_LNK_WIDTH_RESRV = 0x00, @@ -61,12 +41,6 @@ enum pcie_link_width { PCIE_LNK_WIDTH_UNKNOWN = 0xFF, }; -enum pcie_link_speed { - PCIE_2_5GB = 0x14, - PCIE_5_0GB = 0x15, - PCIE_LNK_SPEED_UNKNOWN = 0xFF, -}; - /** * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use * @owner: The module owner of this structure -- cgit v1.2.3 From 3749c51ac6c1560aa1cb1520066bed84c6f8152a Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:32 -0500 Subject: PCI: Make current and maximum bus speeds part of the PCI core Move the max_bus_speed and cur_bus_speed into the pci_bus. Expose the values through the PCI slot driver instead of the hotplug slot driver. Update all the hotplug drivers to use the pci_bus instead of their own data structures. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp_core.c | 2 - drivers/pci/hotplug/cpqphp.h | 2 - drivers/pci/hotplug/cpqphp_core.c | 57 ++++--------- drivers/pci/hotplug/cpqphp_ctrl.c | 27 +++--- drivers/pci/hotplug/ibmphp_core.c | 106 +++++++---------------- drivers/pci/hotplug/pci_hotplug_core.c | 132 ----------------------------- drivers/pci/hotplug/pciehp_core.c | 25 ------ drivers/pci/hotplug/pciehp_hpc.c | 72 ++-------------- drivers/pci/hotplug/rpaphp_core.c | 23 ++--- drivers/pci/hotplug/shpchp.h | 2 - drivers/pci/hotplug/shpchp_core.c | 35 -------- drivers/pci/hotplug/shpchp_ctrl.c | 13 +-- drivers/pci/hotplug/shpchp_hpc.c | 149 +++++++++++++++++---------------- drivers/pci/probe.c | 27 ++++++ drivers/pci/slot.c | 54 ++++++++++++ include/linux/pci.h | 3 + include/linux/pci_hotplug.h | 15 +--- 17 files changed, 246 insertions(+), 498 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 4dd7114964ac..efa9f2de51c1 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -332,8 +332,6 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->attention_status = 0; slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot); slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot); - slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN; - slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun); diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index 9c6a9fd26812..d8ffc7366801 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -310,8 +310,6 @@ struct controller { u8 first_slot; u8 add_support; u8 push_flag; - enum pci_bus_speed speed; - enum pci_bus_speed speed_capability; u8 push_button; /* 0 = no pushbutton, 1 = pushbutton present */ u8 slot_switch_type; /* 0 = no switch, 1 = switch present */ u8 defeature_PHP; /* 0 = PHP not supported, 1 = PHP supported */ diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 075b4f4b6e0d..f184d1d2ecbe 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -583,30 +583,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) return 0; } -static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - struct controller *ctrl = slot->ctrl; - - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); - - *value = ctrl->speed_capability; - - return 0; -} - -static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - struct controller *ctrl = slot->ctrl; - - dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); - - *value = ctrl->speed; - - return 0; -} - static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { .set_attention_status = set_attention_status, .enable_slot = process_SI, @@ -616,8 +592,6 @@ static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, }; #define SLOT_NAME_SIZE 10 @@ -629,6 +603,7 @@ static int ctrl_slot_setup(struct controller *ctrl, struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *hotplug_slot_info; + struct pci_bus *bus = ctrl->pci_bus; u8 number_of_slots; u8 slot_device; u8 slot_number; @@ -694,7 +669,7 @@ static int ctrl_slot_setup(struct controller *ctrl, slot->capabilities |= PCISLOT_64_BIT_SUPPORTED; if (is_slot66mhz(slot)) slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED; - if (ctrl->speed == PCI_SPEED_66MHz) + if (bus->cur_bus_speed == PCI_SPEED_66MHz) slot->capabilities |= PCISLOT_66_MHZ_OPERATION; ctrl_slot = @@ -844,6 +819,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) u32 rc; struct controller *ctrl; struct pci_func *func; + struct pci_bus *bus; int err; err = pci_enable_device(pdev); @@ -852,6 +828,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_name(pdev), err); return err; } + bus = pdev->subordinate; /* Need to read VID early b/c it's used to differentiate CPQ and INTC * discovery @@ -929,22 +906,22 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_byte(pdev, 0x41, &bus_cap); if (bus_cap & 0x80) { dbg("bus max supports 133MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_133MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_133MHz_PCIX; break; } if (bus_cap & 0x40) { dbg("bus max supports 100MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_100MHz_PCIX; break; } if (bus_cap & 20) { dbg("bus max supports 66MHz PCI-X\n"); - ctrl->speed_capability = PCI_SPEED_66MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_66MHz_PCIX; break; } if (bus_cap & 10) { dbg("bus max supports 66MHz PCI\n"); - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; break; } @@ -955,7 +932,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_SUB_HPC_ID: /* Original 6500/7000 implementation */ ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 0; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -966,7 +943,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First Pushbutton implementation */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -976,7 +953,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_SUB_HPC_ID_INTC: /* Third party (6500/7000) */ ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; ctrl->push_button = 0; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -987,7 +964,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First 66 Mhz implementation */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -998,7 +975,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* First PCI-X implementation, 100MHz */ ctrl->push_flag = 1; ctrl->slot_switch_type = 1; - ctrl->speed_capability = PCI_SPEED_100MHz_PCIX; + bus->max_bus_speed = PCI_SPEED_100MHz_PCIX; ctrl->push_button = 1; ctrl->pci_config_space = 1; ctrl->defeature_PHP = 1; @@ -1015,9 +992,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case PCI_VENDOR_ID_INTEL: /* Check for speed capability (0=33, 1=66) */ if (subsystem_deviceid & 0x0001) - ctrl->speed_capability = PCI_SPEED_66MHz; + bus->max_bus_speed = PCI_SPEED_66MHz; else - ctrl->speed_capability = PCI_SPEED_33MHz; + bus->max_bus_speed = PCI_SPEED_33MHz; /* Check for push button */ if (subsystem_deviceid & 0x0002) @@ -1079,7 +1056,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pdev->bus->number); dbg("Hotplug controller capabilities:\n"); - dbg(" speed_capability %d\n", ctrl->speed_capability); + dbg(" speed_capability %d\n", bus->max_bus_speed); dbg(" slot_switch_type %s\n", ctrl->slot_switch_type ? "switch present" : "no switch"); dbg(" defeature_PHP %s\n", ctrl->defeature_PHP ? @@ -1142,7 +1119,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* Check for 66Mhz operation */ - ctrl->speed = get_controller_speed(ctrl); + bus->cur_bus_speed = get_controller_speed(ctrl); /******************************************************** diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index 0ff689afa757..e43908d9b5df 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -1130,12 +1130,13 @@ static int is_bridge(struct pci_func * func) static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot) { struct slot *slot; + struct pci_bus *bus = ctrl->pci_bus; u8 reg; u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER); u16 reg16; u32 leds = readl(ctrl->hpc_reg + LED_CONTROL); - if (ctrl->speed == adapter_speed) + if (bus->cur_bus_speed == adapter_speed) return 0; /* We don't allow freq/mode changes if we find another adapter running @@ -1152,7 +1153,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ * lower speed/mode, we allow the new adapter to function at * this rate if supported */ - if (ctrl->speed < adapter_speed) + if (bus->cur_bus_speed < adapter_speed) return 0; return 1; @@ -1161,20 +1162,20 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ /* If the controller doesn't support freq/mode changes and the * controller is running at a higher mode, we bail */ - if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability)) + if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability)) return 1; /* But we allow the adapter to run at a lower rate if possible */ - if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability)) + if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability)) return 0; /* We try to set the max speed supported by both the adapter and * controller */ - if (ctrl->speed_capability < adapter_speed) { - if (ctrl->speed == ctrl->speed_capability) + if (bus->max_bus_speed < adapter_speed) { + if (bus->cur_bus_speed == bus->max_bus_speed) return 0; - adapter_speed = ctrl->speed_capability; + adapter_speed = bus->max_bus_speed; } writel(0x0L, ctrl->hpc_reg + LED_CONTROL); @@ -1229,8 +1230,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ pci_write_config_byte(ctrl->pci_dev, 0x43, reg); /* Only if mode change...*/ - if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || - ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) + if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || + ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); @@ -1243,7 +1244,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); - ctrl->speed = adapter_speed; + bus->cur_bus_speed = adapter_speed; slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); info("Successfully changed frequency/mode for adapter in slot %d\n", @@ -1269,6 +1270,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ */ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) { + struct pci_bus *bus = ctrl->pci_bus; u8 hp_slot; u8 temp_byte; u8 adapter_speed; @@ -1309,7 +1311,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) wait_for_ctrl_irq (ctrl); adapter_speed = get_adapter_speed(ctrl, hp_slot); - if (ctrl->speed != adapter_speed) + if (bus->cur_bus_speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) rc = WRONG_BUS_FREQUENCY; @@ -1426,6 +1428,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) u32 temp_register = 0xFFFFFFFF; u32 rc = 0; struct pci_func *new_slot = NULL; + struct pci_bus *bus = ctrl->pci_bus; struct slot *p_slot; struct resource_lists res_lists; @@ -1456,7 +1459,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) wait_for_ctrl_irq (ctrl); adapter_speed = get_adapter_speed(ctrl, hp_slot); - if (ctrl->speed != adapter_speed) + if (bus->cur_bus_speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) rc = WRONG_BUS_FREQUENCY; diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 7485ffda950c..d934dd4fa873 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -395,89 +395,40 @@ static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 * value) return rc; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) +static int get_max_bus_speed(struct slot *slot) { - int rc = -ENODEV; - struct slot *pslot; + int rc; u8 mode = 0; + enum pci_bus_speed speed; + struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus; - debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__, - hotplug_slot, value); + debug("%s - Entry slot[%p]\n", __func__, slot); ibmphp_lock_operations(); - - if (hotplug_slot) { - pslot = hotplug_slot->private; - if (pslot) { - rc = 0; - mode = pslot->supported_bus_mode; - *value = pslot->supported_speed; - switch (*value) { - case BUS_SPEED_33: - break; - case BUS_SPEED_66: - if (mode == BUS_MODE_PCIX) - *value += 0x01; - break; - case BUS_SPEED_100: - case BUS_SPEED_133: - *value = pslot->supported_speed + 0x01; - break; - default: - /* Note (will need to change): there would be soon 256, 512 also */ - rc = -ENODEV; - } - } - } - + mode = slot->supported_bus_mode; + speed = slot->supported_speed; ibmphp_unlock_operations(); - debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value); - return rc; -} -static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - int rc = -ENODEV; - struct slot *pslot; - u8 mode = 0; - - debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__, - hotplug_slot, value); - - ibmphp_lock_operations(); - - if (hotplug_slot) { - pslot = hotplug_slot->private; - if (pslot) { - rc = get_cur_bus_info(&pslot); - if (!rc) { - mode = pslot->bus_on->current_bus_mode; - *value = pslot->bus_on->current_speed; - switch (*value) { - case BUS_SPEED_33: - break; - case BUS_SPEED_66: - if (mode == BUS_MODE_PCIX) - *value += 0x01; - else if (mode == BUS_MODE_PCI) - ; - else - *value = PCI_SPEED_UNKNOWN; - break; - case BUS_SPEED_100: - case BUS_SPEED_133: - *value += 0x01; - break; - default: - /* Note of change: there would also be 256, 512 soon */ - rc = -ENODEV; - } - } - } + switch (speed) { + case BUS_SPEED_33: + break; + case BUS_SPEED_66: + if (mode == BUS_MODE_PCIX) + speed += 0x01; + break; + case BUS_SPEED_100: + case BUS_SPEED_133: + speed += 0x01; + break; + default: + /* Note (will need to change): there would be soon 256, 512 also */ + rc = -ENODEV; } - ibmphp_unlock_operations(); - debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value); + if (!rc) + bus->max_bus_speed = speed; + + debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed); return rc; } @@ -572,6 +523,7 @@ static int __init init_ops(void) if (slot_cur->bus_on->current_speed == 0xFF) if (get_cur_bus_info(&slot_cur)) return -1; + get_max_bus_speed(slot_cur); if (slot_cur->ctrl->options == 0xFF) if (get_hpc_options(slot_cur, &slot_cur->ctrl->options)) @@ -655,6 +607,7 @@ static int validate(struct slot *slot_cur, int opn) int ibmphp_update_slot_info(struct slot *slot_cur) { struct hotplug_slot_info *info; + struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus; int rc; u8 bus_speed; u8 mode; @@ -700,8 +653,7 @@ int ibmphp_update_slot_info(struct slot *slot_cur) bus_speed = PCI_SPEED_UNKNOWN; } - info->cur_bus_speed = bus_speed; - info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed; + bus->cur_bus_speed = bus_speed; // To do: bus_names rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info); @@ -1326,8 +1278,6 @@ struct hotplug_slot_ops ibmphp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_present, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, /* .get_max_adapter_speed = get_max_adapter_speed, .get_bus_name_status = get_bus_name, */ diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 38183a534b65..728b119f71ad 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -64,32 +64,6 @@ static int debug; static LIST_HEAD(pci_hotplug_slot_list); static DEFINE_MUTEX(pci_hp_mutex); -/* these strings match up with the values in pci_bus_speed */ -static char *pci_bus_speed_strings[] = { - "33 MHz PCI", /* 0x00 */ - "66 MHz PCI", /* 0x01 */ - "66 MHz PCI-X", /* 0x02 */ - "100 MHz PCI-X", /* 0x03 */ - "133 MHz PCI-X", /* 0x04 */ - NULL, /* 0x05 */ - NULL, /* 0x06 */ - NULL, /* 0x07 */ - NULL, /* 0x08 */ - "66 MHz PCI-X 266", /* 0x09 */ - "100 MHz PCI-X 266", /* 0x0a */ - "133 MHz PCI-X 266", /* 0x0b */ - NULL, /* 0x0c */ - NULL, /* 0x0d */ - NULL, /* 0x0e */ - NULL, /* 0x0f */ - NULL, /* 0x10 */ - "66 MHz PCI-X 533", /* 0x11 */ - "100 MHz PCI-X 533", /* 0x12 */ - "133 MHz PCI-X 533", /* 0x13 */ - "2.5 GT/s PCIe", /* 0x14 */ - "5.0 GT/s PCIe", /* 0x15 */ -}; - #ifdef CONFIG_HOTPLUG_PCI_CPCI extern int cpci_hotplug_init(int debug); extern void cpci_hotplug_exit(void); @@ -118,8 +92,6 @@ GET_STATUS(power_status, u8) GET_STATUS(attention_status, u8) GET_STATUS(latch_status, u8) GET_STATUS(adapter_status, u8) -GET_STATUS(max_bus_speed, enum pci_bus_speed) -GET_STATUS(cur_bus_speed, enum pci_bus_speed) static ssize_t power_read_file(struct pci_slot *slot, char *buf) { @@ -263,60 +235,6 @@ static struct pci_slot_attribute hotplug_slot_attr_presence = { .show = presence_read_file, }; -static char *unknown_speed = "Unknown bus speed"; - -static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf) -{ - char *speed_string; - int retval; - enum pci_bus_speed value; - - retval = get_max_bus_speed(slot->hotplug, &value); - if (retval) - goto exit; - - if (value == PCI_SPEED_UNKNOWN) - speed_string = unknown_speed; - else - speed_string = pci_bus_speed_strings[value]; - - retval = sprintf (buf, "%s\n", speed_string); - -exit: - return retval; -} - -static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = { - .attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO}, - .show = max_bus_speed_read_file, -}; - -static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf) -{ - char *speed_string; - int retval; - enum pci_bus_speed value; - - retval = get_cur_bus_speed(slot->hotplug, &value); - if (retval) - goto exit; - - if (value == PCI_SPEED_UNKNOWN) - speed_string = unknown_speed; - else - speed_string = pci_bus_speed_strings[value]; - - retval = sprintf (buf, "%s\n", speed_string); - -exit: - return retval; -} - -static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = { - .attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO}, - .show = cur_bus_speed_read_file, -}; - static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf, size_t count) { @@ -391,26 +309,6 @@ static bool has_adapter_file(struct pci_slot *pci_slot) return false; } -static bool has_max_bus_speed_file(struct pci_slot *pci_slot) -{ - struct hotplug_slot *slot = pci_slot->hotplug; - if ((!slot) || (!slot->ops)) - return false; - if (slot->ops->get_max_bus_speed) - return true; - return false; -} - -static bool has_cur_bus_speed_file(struct pci_slot *pci_slot) -{ - struct hotplug_slot *slot = pci_slot->hotplug; - if ((!slot) || (!slot->ops)) - return false; - if (slot->ops->get_cur_bus_speed) - return true; - return false; -} - static bool has_test_file(struct pci_slot *pci_slot) { struct hotplug_slot *slot = pci_slot->hotplug; @@ -456,20 +354,6 @@ static int fs_add_slot(struct pci_slot *slot) goto exit_adapter; } - if (has_max_bus_speed_file(slot)) { - retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); - if (retval) - goto exit_max_speed; - } - - if (has_cur_bus_speed_file(slot)) { - retval = sysfs_create_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); - if (retval) - goto exit_cur_speed; - } - if (has_test_file(slot)) { retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_test.attr); @@ -480,14 +364,6 @@ static int fs_add_slot(struct pci_slot *slot) goto exit; exit_test: - if (has_cur_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); -exit_cur_speed: - if (has_max_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); -exit_max_speed: if (has_adapter_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); @@ -523,14 +399,6 @@ static void fs_remove_slot(struct pci_slot *slot) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr); - if (has_max_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_max_bus_speed.attr); - - if (has_cur_bus_speed_file(slot)) - sysfs_remove_file(&slot->kobj, - &hotplug_slot_attr_cur_bus_speed.attr); - if (has_test_file(slot)) sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 5674b2075bdc..920f820edf87 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -69,8 +69,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); -static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); /** * release_slot - free up the memory used by a slot @@ -113,8 +111,6 @@ static int init_slot(struct controller *ctrl) ops->disable_slot = disable_slot; ops->get_power_status = get_power_status; ops->get_adapter_status = get_adapter_status; - ops->get_max_bus_speed = get_max_bus_speed; - ops->get_cur_bus_speed = get_cur_bus_speed; if (MRL_SENS(ctrl)) ops->get_latch_status = get_latch_status; if (ATTN_LED(ctrl)) { @@ -227,27 +223,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) return pciehp_get_adapter_status(slot, value); } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, - enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - return pciehp_get_max_link_speed(slot, value); -} - -static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = hotplug_slot->private; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - return pciehp_get_cur_link_speed(slot, value); -} - static int pciehp_probe(struct pcie_device *dev) { int rc; diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 6744ca1d8d01..40b48f569b1e 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -492,6 +492,7 @@ int pciehp_power_on_slot(struct slot * slot) u16 slot_cmd; u16 cmd_mask; u16 slot_status; + u16 lnk_status; int retval = 0; /* Clear sticky power-fault bit from previous power failures */ @@ -523,6 +524,14 @@ int pciehp_power_on_slot(struct slot * slot) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); + retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); + if (retval) { + ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n", + __func__); + return retval; + } + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); + return retval; } @@ -610,37 +619,6 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) return IRQ_HANDLED; } -int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value) -{ - struct controller *ctrl = slot->ctrl; - enum pci_bus_speed lnk_speed; - u32 lnk_cap; - int retval = 0; - - retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__); - return retval; - } - - switch (lnk_cap & 0x000F) { - case 1: - lnk_speed = PCIE_SPEED_2_5GT; - break; - case 2: - lnk_speed = PCIE_SPEED_5_0GT; - break; - default: - lnk_speed = PCI_SPEED_UNKNOWN; - break; - } - - *value = lnk_speed; - ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed); - - return retval; -} - int pciehp_get_max_lnk_width(struct slot *slot, enum pcie_link_width *value) { @@ -691,38 +669,6 @@ int pciehp_get_max_lnk_width(struct slot *slot, return retval; } -int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value) -{ - struct controller *ctrl = slot->ctrl; - enum pci_bus_speed lnk_speed = PCI_SPEED_UNKNOWN; - int retval = 0; - u16 lnk_status; - - retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n", - __func__); - return retval; - } - - switch (lnk_status & PCI_EXP_LNKSTA_CLS) { - case 1: - lnk_speed = PCIE_SPEED_2_5GT; - break; - case 2: - lnk_speed = PCIE_SPEED_5_0GT; - break; - default: - lnk_speed = PCI_SPEED_UNKNOWN; - break; - } - - *value = lnk_speed; - ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed); - - return retval; -} - int pciehp_get_cur_lnk_width(struct slot *slot, enum pcie_link_width *value) { diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index c159223389ec..b14e5e66a92c 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -130,10 +130,9 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value) return 0; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) +static enum pci_bus_speed get_max_bus_speed(struct slot *slot) { - struct slot *slot = (struct slot *)hotplug_slot->private; - + enum pci_bus_speed speed; switch (slot->type) { case 1: case 2: @@ -141,30 +140,30 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe case 4: case 5: case 6: - *value = PCI_SPEED_33MHz; /* speed for case 1-6 */ + speed = PCI_SPEED_33MHz; /* speed for case 1-6 */ break; case 7: case 8: - *value = PCI_SPEED_66MHz; + speed = PCI_SPEED_66MHz; break; case 11: case 14: - *value = PCI_SPEED_66MHz_PCIX; + speed = PCI_SPEED_66MHz_PCIX; break; case 12: case 15: - *value = PCI_SPEED_100MHz_PCIX; + speed = PCI_SPEED_100MHz_PCIX; break; case 13: case 16: - *value = PCI_SPEED_133MHz_PCIX; + speed = PCI_SPEED_133MHz_PCIX; break; default: - *value = PCI_SPEED_UNKNOWN; + speed = PCI_SPEED_UNKNOWN; break; - } - return 0; + + return speed; } static int get_children_props(struct device_node *dn, const int **drc_indexes, @@ -408,6 +407,8 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) slot->state = NOT_VALID; return -EINVAL; } + + slot->bus->max_bus_speed = get_max_bus_speed(slot); return 0; } diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 8e210cd76e55..d2627e1c3ac1 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -333,8 +333,6 @@ struct hpc_ops { int (*set_attention_status)(struct slot *slot, u8 status); int (*get_latch_status)(struct slot *slot, u8 *status); int (*get_adapter_status)(struct slot *slot, u8 *status); - int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed); - int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed); int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed); int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode); int (*get_prog_int)(struct slot *slot, u8 *prog_int); diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 8a520a3d0f59..a5062297f488 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -65,8 +65,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value); static int get_attention_status (struct hotplug_slot *slot, u8 *value); static int get_latch_status (struct hotplug_slot *slot, u8 *value); static int get_adapter_status (struct hotplug_slot *slot, u8 *value); -static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); -static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value); static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { .set_attention_status = set_attention_status, @@ -76,8 +74,6 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, }; /** @@ -279,37 +275,6 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) return 0; } -static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, - enum pci_bus_speed *value) -{ - struct slot *slot = get_slot(hotplug_slot); - int retval; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - retval = slot->hpc_ops->get_max_bus_speed(slot, value); - if (retval < 0) - *value = PCI_SPEED_UNKNOWN; - - return 0; -} - -static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value) -{ - struct slot *slot = get_slot(hotplug_slot); - int retval; - - ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", - __func__, slot_name(slot)); - - retval = slot->hpc_ops->get_cur_bus_speed(slot, value); - if (retval < 0) - *value = PCI_SPEED_UNKNOWN; - - return 0; -} - static int is_shpc_capable(struct pci_dev *dev) { if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index b8ab2796e66a..179b1c1cb99b 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -285,17 +285,8 @@ static int board_added(struct slot *p_slot) return WRONG_BUS_FREQUENCY; } - rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp); - if (rc) { - ctrl_err(ctrl, "Can't get bus operation speed\n"); - return WRONG_BUS_FREQUENCY; - } - - rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp); - if (rc) { - ctrl_err(ctrl, "Can't get max bus operation speed\n"); - msp = bsp; - } + bsp = ctrl->pci_dev->bus->cur_bus_speed; + msp = ctrl->pci_dev->bus->max_bus_speed; /* Check if there are other slots or devices on the same bus */ if (!list_empty(&ctrl->pci_dev->subordinate->devices)) diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 86dc39847769..5f5e8d2e3552 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -660,6 +660,75 @@ static int hpc_slot_disable(struct slot * slot) return retval; } +static int shpc_get_cur_bus_speed(struct controller *ctrl) +{ + int retval = 0; + struct pci_bus *bus = ctrl->pci_dev->subordinate; + enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; + u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); + u8 pi = shpc_readb(ctrl, PROG_INTERFACE); + u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); + + if ((pi == 1) && (speed_mode > 4)) { + retval = -ENODEV; + goto out; + } + + switch (speed_mode) { + case 0x0: + bus_speed = PCI_SPEED_33MHz; + break; + case 0x1: + bus_speed = PCI_SPEED_66MHz; + break; + case 0x2: + bus_speed = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + bus_speed = PCI_SPEED_100MHz_PCIX; + break; + case 0x4: + bus_speed = PCI_SPEED_133MHz_PCIX; + break; + case 0x5: + bus_speed = PCI_SPEED_66MHz_PCIX_ECC; + break; + case 0x6: + bus_speed = PCI_SPEED_100MHz_PCIX_ECC; + break; + case 0x7: + bus_speed = PCI_SPEED_133MHz_PCIX_ECC; + break; + case 0x8: + bus_speed = PCI_SPEED_66MHz_PCIX_266; + break; + case 0x9: + bus_speed = PCI_SPEED_100MHz_PCIX_266; + break; + case 0xa: + bus_speed = PCI_SPEED_133MHz_PCIX_266; + break; + case 0xb: + bus_speed = PCI_SPEED_66MHz_PCIX_533; + break; + case 0xc: + bus_speed = PCI_SPEED_100MHz_PCIX_533; + break; + case 0xd: + bus_speed = PCI_SPEED_133MHz_PCIX_533; + break; + default: + retval = -ENODEV; + break; + } + + out: + bus->cur_bus_speed = bus_speed; + dbg("Current bus speed = %d\n", bus_speed); + return retval; +} + + static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) { int retval; @@ -720,6 +789,8 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) retval = shpc_write_cmd(slot, 0, cmd); if (retval) ctrl_err(ctrl, "%s: Write command failed!\n", __func__); + else + shpc_get_cur_bus_speed(ctrl); return retval; } @@ -803,10 +874,10 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) +static int shpc_get_max_bus_speed(struct controller *ctrl) { int retval = 0; - struct controller *ctrl = slot->ctrl; + struct pci_bus *bus = ctrl->pci_dev->subordinate; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; u8 pi = shpc_readb(ctrl, PROG_INTERFACE); u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1); @@ -842,79 +913,12 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) retval = -ENODEV; } - *value = bus_speed; + bus->max_bus_speed = bus_speed; ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed); return retval; } -static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) -{ - int retval = 0; - struct controller *ctrl = slot->ctrl; - enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; - u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); - u8 pi = shpc_readb(ctrl, PROG_INTERFACE); - u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); - - if ((pi == 1) && (speed_mode > 4)) { - *value = PCI_SPEED_UNKNOWN; - return -ENODEV; - } - - switch (speed_mode) { - case 0x0: - *value = PCI_SPEED_33MHz; - break; - case 0x1: - *value = PCI_SPEED_66MHz; - break; - case 0x2: - *value = PCI_SPEED_66MHz_PCIX; - break; - case 0x3: - *value = PCI_SPEED_100MHz_PCIX; - break; - case 0x4: - *value = PCI_SPEED_133MHz_PCIX; - break; - case 0x5: - *value = PCI_SPEED_66MHz_PCIX_ECC; - break; - case 0x6: - *value = PCI_SPEED_100MHz_PCIX_ECC; - break; - case 0x7: - *value = PCI_SPEED_133MHz_PCIX_ECC; - break; - case 0x8: - *value = PCI_SPEED_66MHz_PCIX_266; - break; - case 0x9: - *value = PCI_SPEED_100MHz_PCIX_266; - break; - case 0xa: - *value = PCI_SPEED_133MHz_PCIX_266; - break; - case 0xb: - *value = PCI_SPEED_66MHz_PCIX_533; - break; - case 0xc: - *value = PCI_SPEED_100MHz_PCIX_533; - break; - case 0xd: - *value = PCI_SPEED_133MHz_PCIX_533; - break; - default: - *value = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - break; - } - - ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed); - return retval; -} - static struct hpc_ops shpchp_hpc_ops = { .power_on_slot = hpc_power_on_slot, .slot_enable = hpc_slot_enable, @@ -926,8 +930,6 @@ static struct hpc_ops shpchp_hpc_ops = { .get_latch_status = hpc_get_latch_status, .get_adapter_status = hpc_get_adapter_status, - .get_max_bus_speed = hpc_get_max_bus_speed, - .get_cur_bus_speed = hpc_get_cur_bus_speed, .get_adapter_speed = hpc_get_adapter_speed, .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap, .get_prog_int = hpc_get_prog_int, @@ -1086,6 +1088,9 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) } ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq); + shpc_get_max_bus_speed(ctrl); + shpc_get_cur_bus_speed(ctrl); + /* * If this is the first controller to be initialized, * initialize the shpchpd work queue diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index dd64310a735e..51cf8982fec7 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -387,10 +387,37 @@ static struct pci_bus * pci_alloc_bus(void) INIT_LIST_HEAD(&b->children); INIT_LIST_HEAD(&b->devices); INIT_LIST_HEAD(&b->slots); + b->max_bus_speed = PCI_SPEED_UNKNOWN; + b->cur_bus_speed = PCI_SPEED_UNKNOWN; } return b; } +static unsigned char pcie_link_speed[] = { + PCI_SPEED_UNKNOWN, /* 0 */ + PCIE_SPEED_2_5GT, /* 1 */ + PCIE_SPEED_5_0GT, /* 2 */ + PCI_SPEED_UNKNOWN, /* 3 */ + PCI_SPEED_UNKNOWN, /* 4 */ + PCI_SPEED_UNKNOWN, /* 5 */ + PCI_SPEED_UNKNOWN, /* 6 */ + PCI_SPEED_UNKNOWN, /* 7 */ + PCI_SPEED_UNKNOWN, /* 8 */ + PCI_SPEED_UNKNOWN, /* 9 */ + PCI_SPEED_UNKNOWN, /* A */ + PCI_SPEED_UNKNOWN, /* B */ + PCI_SPEED_UNKNOWN, /* C */ + PCI_SPEED_UNKNOWN, /* D */ + PCI_SPEED_UNKNOWN, /* E */ + PCI_SPEED_UNKNOWN /* F */ +}; + +void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) +{ + bus->cur_bus_speed = pcie_link_speed[linksta & 0xf]; +} +EXPORT_SYMBOL_GPL(pcie_update_link_speed); + static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr) { diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 8c02b6c53bdb..6f6b8d24786a 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -47,6 +47,54 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf) slot->number); } +/* these strings match up with the values in pci_bus_speed */ +static char *pci_bus_speed_strings[] = { + "33 MHz PCI", /* 0x00 */ + "66 MHz PCI", /* 0x01 */ + "66 MHz PCI-X", /* 0x02 */ + "100 MHz PCI-X", /* 0x03 */ + "133 MHz PCI-X", /* 0x04 */ + NULL, /* 0x05 */ + NULL, /* 0x06 */ + NULL, /* 0x07 */ + NULL, /* 0x08 */ + "66 MHz PCI-X 266", /* 0x09 */ + "100 MHz PCI-X 266", /* 0x0a */ + "133 MHz PCI-X 266", /* 0x0b */ + NULL, /* 0x0c */ + NULL, /* 0x0d */ + NULL, /* 0x0e */ + NULL, /* 0x0f */ + NULL, /* 0x10 */ + "66 MHz PCI-X 533", /* 0x11 */ + "100 MHz PCI-X 533", /* 0x12 */ + "133 MHz PCI-X 533", /* 0x13 */ + "2.5 GT/s PCIe", /* 0x14 */ + "5.0 GT/s PCIe", /* 0x15 */ +}; + +static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf) +{ + const char *speed_string; + + if (speed < ARRAY_SIZE(pci_bus_speed_strings)) + speed_string = pci_bus_speed_strings[speed]; + else + speed_string = "Unknown"; + + return sprintf(buf, "%s\n", speed_string); +} + +static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf) +{ + return bus_speed_read(slot->bus->max_bus_speed, buf); +} + +static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf) +{ + return bus_speed_read(slot->bus->cur_bus_speed, buf); +} + static void pci_slot_release(struct kobject *kobj) { struct pci_dev *dev; @@ -66,9 +114,15 @@ static void pci_slot_release(struct kobject *kobj) static struct pci_slot_attribute pci_slot_attr_address = __ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL); +static struct pci_slot_attribute pci_slot_attr_max_speed = + __ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL); +static struct pci_slot_attribute pci_slot_attr_cur_speed = + __ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL); static struct attribute *pci_slot_default_attrs[] = { &pci_slot_attr_address.attr, + &pci_slot_attr_max_speed.attr, + &pci_slot_attr_cur_speed.attr, NULL, }; diff --git a/include/linux/pci.h b/include/linux/pci.h index d76a8a0b6b53..a446097a9f68 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -380,6 +380,8 @@ struct pci_bus { unsigned char primary; /* number of primary bridge */ unsigned char secondary; /* number of secondary bridge */ unsigned char subordinate; /* max number of subordinate buses */ + unsigned char max_bus_speed; /* enum pci_bus_speed */ + unsigned char cur_bus_speed; /* enum pci_bus_speed */ char name[48]; @@ -610,6 +612,7 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr); +void pcie_update_link_speed(struct pci_bus *bus, u16 link_status); struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, const char *name, struct hotplug_slot *hotplug); diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 56251ac385e9..5d09cbafa7db 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -63,12 +63,6 @@ enum pcie_link_width { * @get_adapter_status: Called to get see if an adapter is present in the slot or not. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. - * @get_max_bus_speed: Called to get the max bus speed for a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. - * @get_cur_bus_speed: Called to get the current bus speed for a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. * * The table of function pointers that is passed to the hotplug pci core by a * hotplug pci driver. These functions are called by the hotplug pci core when @@ -86,17 +80,14 @@ struct hotplug_slot_ops { int (*get_attention_status) (struct hotplug_slot *slot, u8 *value); int (*get_latch_status) (struct hotplug_slot *slot, u8 *value); int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value); - int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); - int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); }; /** * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot - * @power: if power is enabled or not (1/0) + * @power_status: if power is enabled or not (1/0) * @attention_status: if the attention light is enabled or not (1/0) * @latch_status: if the latch (if any) is open or closed (1/0) - * @adapter_present: if there is a pci board present in the slot or not (1/0) - * @address: (domain << 16 | bus << 8 | dev) + * @adapter_status: if there is a pci board present in the slot or not (1/0) * * Used to notify the hotplug pci core of the status of a specific slot. */ @@ -105,8 +96,6 @@ struct hotplug_slot_info { u8 attention_status; u8 latch_status; u8 adapter_status; - enum pci_bus_speed max_bus_speed; - enum pci_bus_speed cur_bus_speed; }; /** -- cgit v1.2.3 From 9be60ca0497a2563662fde4c9007841c3b79a742 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:33 -0500 Subject: PCI: Add support for detection of PCIe and PCI-X bus speeds Both PCIe and PCI-X bridges report their secondary bus speed in their respective capabilities. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 51cf8982fec7..188ee9cf0605 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -393,6 +393,25 @@ static struct pci_bus * pci_alloc_bus(void) return b; } +static unsigned char pcix_bus_speed[] = { + PCI_SPEED_UNKNOWN, /* 0 */ + PCI_SPEED_66MHz_PCIX, /* 1 */ + PCI_SPEED_100MHz_PCIX, /* 2 */ + PCI_SPEED_133MHz_PCIX, /* 3 */ + PCI_SPEED_UNKNOWN, /* 4 */ + PCI_SPEED_66MHz_PCIX_ECC, /* 5 */ + PCI_SPEED_100MHz_PCIX_ECC, /* 6 */ + PCI_SPEED_133MHz_PCIX_ECC, /* 7 */ + PCI_SPEED_UNKNOWN, /* 8 */ + PCI_SPEED_66MHz_PCIX_266, /* 9 */ + PCI_SPEED_100MHz_PCIX_266, /* A */ + PCI_SPEED_133MHz_PCIX_266, /* B */ + PCI_SPEED_UNKNOWN, /* C */ + PCI_SPEED_66MHz_PCIX_533, /* D */ + PCI_SPEED_100MHz_PCIX_533, /* E */ + PCI_SPEED_133MHz_PCIX_533 /* F */ +}; + static unsigned char pcie_link_speed[] = { PCI_SPEED_UNKNOWN, /* 0 */ PCIE_SPEED_2_5GT, /* 1 */ @@ -418,6 +437,51 @@ void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) } EXPORT_SYMBOL_GPL(pcie_update_link_speed); +static void pci_set_bus_speed(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + int pos; + + pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); + if (pos) { + u16 status; + enum pci_bus_speed max; + pci_read_config_word(bridge, pos + 2, &status); + + if (status & 0x8000) { + max = PCI_SPEED_133MHz_PCIX_533; + } else if (status & 0x4000) { + max = PCI_SPEED_133MHz_PCIX_266; + } else if (status & 0x0002) { + if (((status >> 12) & 0x3) == 2) { + max = PCI_SPEED_133MHz_PCIX_ECC; + } else { + max = PCI_SPEED_133MHz_PCIX; + } + } else { + max = PCI_SPEED_66MHz_PCIX; + } + + bus->max_bus_speed = max; + bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf]; + + return; + } + + pos = pci_find_capability(bridge, PCI_CAP_ID_EXP); + if (pos) { + u32 linkcap; + u16 linksta; + + pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap); + bus->max_bus_speed = pcie_link_speed[linkcap & 0xf]; + + pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta); + pcie_update_link_speed(bus, linksta); + } +} + + static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr) { @@ -457,6 +521,8 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, child->self = bridge; child->bridge = get_device(&bridge->dev); + pci_set_bus_speed(child); + /* Set up default resource pointers and names.. */ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; -- cgit v1.2.3 From 45b4cdd57ef0e57555b2ab61b584784819b39365 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:34 -0500 Subject: PCI: Add support for AGP in cur/max bus speed Take advantage of some gaps in the table to fit in support for AGP speeds. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/slot.c | 10 +++++----- include/linux/pci.h | 5 +++++ 3 files changed, 55 insertions(+), 5 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 188ee9cf0605..2803ab96a98c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -437,11 +437,56 @@ void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) } EXPORT_SYMBOL_GPL(pcie_update_link_speed); +static unsigned char agp_speeds[] = { + AGP_UNKNOWN, + AGP_1X, + AGP_2X, + AGP_4X, + AGP_8X +}; + +static enum pci_bus_speed agp_speed(int agp3, int agpstat) +{ + int index = 0; + + if (agpstat & 4) + index = 3; + else if (agpstat & 2) + index = 2; + else if (agpstat & 1) + index = 1; + else + goto out; + + if (agp3) { + index += 2; + if (index == 5) + index = 0; + } + + out: + return agp_speeds[index]; +} + + static void pci_set_bus_speed(struct pci_bus *bus) { struct pci_dev *bridge = bus->self; int pos; + pos = pci_find_capability(bridge, PCI_CAP_ID_AGP); + if (!pos) + pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3); + if (pos) { + u32 agpstat, agpcmd; + + pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat); + bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7); + + pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd); + bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7); + } + pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); if (pos) { u16 status; diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 6f6b8d24786a..c7260d4e339b 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -61,11 +61,11 @@ static char *pci_bus_speed_strings[] = { "66 MHz PCI-X 266", /* 0x09 */ "100 MHz PCI-X 266", /* 0x0a */ "133 MHz PCI-X 266", /* 0x0b */ - NULL, /* 0x0c */ - NULL, /* 0x0d */ - NULL, /* 0x0e */ - NULL, /* 0x0f */ - NULL, /* 0x10 */ + "Unknown AGP", /* 0x0c */ + "1x AGP", /* 0x0d */ + "2x AGP", /* 0x0e */ + "4x AGP", /* 0x0f */ + "8x AGP", /* 0x10 */ "66 MHz PCI-X 533", /* 0x11 */ "100 MHz PCI-X 533", /* 0x12 */ "133 MHz PCI-X 533", /* 0x13 */ diff --git a/include/linux/pci.h b/include/linux/pci.h index a446097a9f68..842adaad312e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -200,6 +200,11 @@ enum pci_bus_speed { PCI_SPEED_66MHz_PCIX_266 = 0x09, PCI_SPEED_100MHz_PCIX_266 = 0x0a, PCI_SPEED_133MHz_PCIX_266 = 0x0b, + AGP_UNKNOWN = 0x0c, + AGP_1X = 0x0d, + AGP_2X = 0x0e, + AGP_4X = 0x0f, + AGP_8X = 0x10, PCI_SPEED_66MHz_PCIX_533 = 0x11, PCI_SPEED_100MHz_PCIX_533 = 0x12, PCI_SPEED_133MHz_PCIX_533 = 0x13, -- cgit v1.2.3 From 9dfd97fe12f79ec8b68feb63912a4ef2f31f571a Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:35 -0500 Subject: PCI: Add support for reporting PCIe 3.0 speeds Add the 8.0 GT/s speed. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 2 +- drivers/pci/slot.c | 1 + include/linux/pci.h | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2803ab96a98c..9672760c7ade 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -416,7 +416,7 @@ static unsigned char pcie_link_speed[] = { PCI_SPEED_UNKNOWN, /* 0 */ PCIE_SPEED_2_5GT, /* 1 */ PCIE_SPEED_5_0GT, /* 2 */ - PCI_SPEED_UNKNOWN, /* 3 */ + PCIE_SPEED_8_0GT, /* 3 */ PCI_SPEED_UNKNOWN, /* 4 */ PCI_SPEED_UNKNOWN, /* 5 */ PCI_SPEED_UNKNOWN, /* 6 */ diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index c7260d4e339b..49c9e6c9779a 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -71,6 +71,7 @@ static char *pci_bus_speed_strings[] = { "133 MHz PCI-X 533", /* 0x13 */ "2.5 GT/s PCIe", /* 0x14 */ "5.0 GT/s PCIe", /* 0x15 */ + "8.0 GT/s PCIe", /* 0x16 */ }; static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf) diff --git a/include/linux/pci.h b/include/linux/pci.h index 842adaad312e..0c3a29444f89 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -210,6 +210,7 @@ enum pci_bus_speed { PCI_SPEED_133MHz_PCIX_533 = 0x13, PCIE_SPEED_2_5GT = 0x14, PCIE_SPEED_5_0GT = 0x15, + PCIE_SPEED_8_0GT = 0x16, PCI_SPEED_UNKNOWN = 0xff, }; -- cgit v1.2.3 From 3804259475314a50e4d7a8a974a22fddb6ac7dd7 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 4 Jan 2010 15:44:10 -0800 Subject: PCI hotplug: remove obsolete usage of get_bus_speed from rpaphp hotplug ops No longer needed and causes build breakage. Reported-by: Stephen Rothwell Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/rpaphp_core.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index b14e5e66a92c..dcaae725fd79 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -430,7 +430,6 @@ struct hotplug_slot_ops rpaphp_hotplug_slot_ops = { .get_power_status = get_power_status, .get_attention_status = get_attention_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, }; module_init(rpaphp_init); -- cgit v1.2.3 From 93177a748ba0d4f3d3e51c8e6c785773bf6a70df Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 2 Jan 2010 22:57:24 +0100 Subject: PCI: Clean up build for CONFIG_PCI_QUIRKS unset Currently, drivers/pci/quirks.c is built unconditionally, but if CONFIG_PCI_QUIRKS is unset, the only things actually built in this file are definitions of global variables and empty functions (due to the #ifdef CONFIG_PCI_QUIRKS embracing all of the code inside the file). This is not particularly nice and if someone overlooks the #ifdef CONFIG_PCI_QUIRKS, build errors are introduced. To clean that up, move the definitions of the global variables in quirks.c that are always built to pci.c, move the definitions of the empty functions (compiled when CONFIG_PCI_QUIRKS is unset) to headers (additionally make these functions static inline) and modify drivers/pci/Makefile so that quirks.c is only built if CONFIG_PCI_QUIRKS is set. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/Makefile | 4 +++- drivers/pci/pci.c | 7 ++++++- drivers/pci/pci.h | 7 +++++++ drivers/pci/quirks.c | 14 ++------------ include/linux/pci.h | 6 +++++- 5 files changed, 23 insertions(+), 15 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 4df48d58eaa6..adb74253a996 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -2,12 +2,14 @@ # Makefile for the PCI bus specific drivers. # -obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \ +obj-y += access.o bus.o probe.o remove.o pci.o \ pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ irq.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_SYSFS) += slot.o +obj-$(CONFIG_PCI_QUIRKS) += quirks.o + obj-$(CONFIG_PCI_LEGACY) += legacy.o CFLAGS_legacy.o += -Wno-deprecated-declarations diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 315fea47e784..1f9be53c39ba 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -19,7 +19,6 @@ #include #include #include -#include /* isa_dma_bridge_buggy */ #include #include #include "pci.h" @@ -29,6 +28,12 @@ const char *pci_power_names[] = { }; EXPORT_SYMBOL_GPL(pci_power_names); +int isa_dma_bridge_buggy; +EXPORT_SYMBOL(isa_dma_bridge_buggy); + +int pci_pci_problems; +EXPORT_SYMBOL(pci_pci_problems); + unsigned int pci_pm_d3_delay; static void pci_dev_d3_sleep(struct pci_dev *dev) diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index fbd0e3adbca3..5d169bc3ccd1 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -319,6 +319,13 @@ struct pci_dev_reset_methods { int (*reset)(struct pci_dev *dev, int probe); }; +#ifdef CONFIG_PCI_QUIRKS extern int pci_dev_specific_reset(struct pci_dev *dev, int probe); +#else +static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + return -ENOTTY; +} +#endif #endif /* DRIVERS_PCI_H */ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index d58b94030ef3..790eb69a4aa9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -25,14 +25,9 @@ #include #include #include +#include /* isa_dma_bridge_buggy */ #include "pci.h" -int isa_dma_bridge_buggy; -EXPORT_SYMBOL(isa_dma_bridge_buggy); -int pci_pci_problems; -EXPORT_SYMBOL(pci_pci_problems); - -#ifdef CONFIG_PCI_QUIRKS /* * This quirk function disables memory decoding and releases memory resources * of the device specified by kernel's boot parameter 'pci=resource_alignment='. @@ -2612,6 +2607,7 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) } pci_do_fixups(dev, start, end); } +EXPORT_SYMBOL(pci_fixup_device); static int __init pci_apply_final_quirks(void) { @@ -2723,9 +2719,3 @@ int pci_dev_specific_reset(struct pci_dev *dev, int probe) return -ENOTTY; } - -#else -void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} -int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; } -#endif -EXPORT_SYMBOL(pci_fixup_device); diff --git a/include/linux/pci.h b/include/linux/pci.h index 0c3a29444f89..16f48e7506ed 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1271,8 +1271,12 @@ enum pci_fixup_pass { DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ suspend##vendor##device##hook, vendor, device, hook) - +#ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); +#else +static inline void pci_fixup_device(enum pci_fixup_pass pass, + struct pci_dev *dev) {} +#endif void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr); -- cgit v1.2.3 From b26b2d494b659f988b4d75eb394dfa0ddac415c9 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 1 Jan 2010 17:40:49 +0100 Subject: resource/PCI: align functions now return start of resource As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas Cc: Yinghai Lu Signed-off-by: Dominik Brodowski Signed-off-by: Jesse Barnes --- arch/alpha/kernel/pci.c | 4 ++-- arch/arm/kernel/bios32.c | 8 +++++--- arch/cris/arch-v32/drivers/pci/bios.c | 14 ++++++-------- arch/frv/mb93090-mb00/pci-frv.c | 14 ++++++-------- arch/ia64/pci/pci.c | 3 ++- arch/mips/pci/pci.c | 4 ++-- arch/mips/pmc-sierra/yosemite/ht.c | 10 +++++----- arch/mn10300/unit-asb2305/pci-asb2305.c | 16 +++++++--------- arch/parisc/kernel/pci.c | 10 +++++----- arch/powerpc/kernel/pci-common.c | 13 ++++++------- arch/sh/drivers/pci/pci.c | 6 +++--- arch/sparc/kernel/pci.c | 5 +++-- arch/sparc/kernel/pcic.c | 5 +++-- arch/x86/pci/i386.c | 12 +++++------- arch/xtensa/kernel/pci.c | 11 +++++------ drivers/pci/bus.c | 6 ++++-- drivers/pcmcia/rsrc_mgr.c | 12 ++++++------ drivers/pcmcia/rsrc_nonstatic.c | 16 +++++++++------- include/linux/ioport.h | 6 ++++-- include/linux/pci.h | 8 +++++--- kernel/resource.c | 14 +++++++++----- 21 files changed, 102 insertions(+), 95 deletions(-) (limited to 'drivers/pci') diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index a91ba28999b5..5cf111ed851c 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -126,7 +126,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final); #define MB (1024*KB) #define GB (1024*MB) -void +resource_size_t pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { @@ -184,7 +184,7 @@ pcibios_align_resource(void *data, struct resource *res, } } - res->start = start; + return start; } #undef KB #undef MB diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 809681900ec8..a7c85f84f06c 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -616,15 +616,17 @@ char * __init pcibios_setup(char *str) * but we want to try to avoid allocating at 0x2900-0x2bff * which might be mirrored at 0x0100-0x03ff.. */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) { resource_size_t start = res->start; if (res->flags & IORESOURCE_IO && start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = (start + align - 1) & ~(align - 1); + start = (start + align - 1) & ~(align - 1); + + return start; } /** diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c index 77ee319193c3..5811e2f8945c 100644 --- a/arch/cris/arch-v32/drivers/pci/bios.c +++ b/arch/cris/arch-v32/drivers/pci/bios.c @@ -41,18 +41,16 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return 0; } -void +resource_size_t pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; + resource_size_t start = res->start; - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; + + return start } int pcibios_enable_resources(struct pci_dev *dev, int mask) diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index 566bdeb499d1..c947aa43f2a9 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -32,18 +32,16 @@ * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void +resource_size_t pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; + resource_size_t start = res->start; - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; + + return start } diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index df639db779f9..ef574cd311d1 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -547,10 +547,11 @@ pcibios_disable_device (struct pci_dev *dev) acpi_pci_irq_disable(dev); } -void +resource_size_t pcibios_align_resource (void *data, struct resource *res, resource_size_t size, resource_size_t align) { + return res->start; } /* diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 9a11c2226891..9085988f7cf3 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -49,7 +49,7 @@ static int pci_initialized; * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void +resource_size_t pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { @@ -73,7 +73,7 @@ pcibios_align_resource(void *data, struct resource *res, start = PCIBIOS_MIN_MEM + hose->mem_resource->start; } - res->start = start; + return start; } static void __devinit pcibios_scanbus(struct pci_controller *hose) diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c index 678388fd34b1..5e410087b628 100644 --- a/arch/mips/pmc-sierra/yosemite/ht.c +++ b/arch/mips/pmc-sierra/yosemite/ht.c @@ -345,14 +345,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_enable_resources(dev); } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - /* We need to avoid collisions with `mirrored' VGA ports and other strange ISA hardware, so we always want the addresses kilobyte aligned. */ @@ -363,8 +362,9 @@ void pcibios_align_resource(void *data, struct resource *res, } start = (start + 1024 - 1) & ~(1024 - 1); - res->start = start; } + + return start; } struct pci_ops titan_pci_ops = { diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index 78cd134ddf7d..b0b3758fba08 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -31,9 +31,11 @@ * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) { + resource_size_t start = res->start; + #if 0 struct pci_dev *dev = data; @@ -47,14 +49,10 @@ void pcibios_align_resource(void *data, struct resource *res, ); #endif - if (res->flags & IORESOURCE_IO) { - unsigned long start = res->start; + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } + return start; } diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index f7064abc3bb6..4463a31973ba 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -254,10 +254,10 @@ EXPORT_SYMBOL(pcibios_bus_to_resource); * Since we are just checking candidates, don't use any fields other * than res->start. */ -void pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t alignment) { - resource_size_t mask, align; + resource_size_t mask, align, start = res->start; DBG_RES("pcibios_align_resource(%s, (%p) [%lx,%lx]/%x, 0x%lx, 0x%lx)\n", pci_name(((struct pci_dev *) data)), @@ -269,10 +269,10 @@ void pcibios_align_resource(void *data, struct resource *res, /* Align to largest of MIN or input size */ mask = max(alignment, align) - 1; - res->start += mask; - res->start &= ~mask; + start += mask; + start &= ~mask; - /* The caller updates the end field, we don't. */ + return start; } diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index cadbed679fbb..d7eebbaf01f1 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1181,21 +1181,20 @@ static int skip_isa_ioresource_align(struct pci_dev *dev) * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (skip_isa_ioresource_align(dev)) - return; - if (start & 0x300) { + return start; + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } } + + return start; } EXPORT_SYMBOL(pcibios_align_resource); diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index c481df639022..b36ca825b3d3 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -148,8 +148,8 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) * addresses to be allocated in the 0x000-0x0ff region * modulo 0x400. */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; struct pci_channel *chan = dev->sysdata; @@ -171,7 +171,7 @@ void pcibios_align_resource(void *data, struct resource *res, start = PCIBIOS_MIN_MEM + chan->mem_resource->start; } - res->start = start; + return start; } void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 592b03d85167..d56c1f34689e 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -722,9 +722,10 @@ void pcibios_update_irq(struct pci_dev *pdev, int irq) { } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) { + return res->start; } int pcibios_enable_device(struct pci_dev *dev, int mask) diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 4e2724ec2bb6..46fda64ff163 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -768,9 +768,10 @@ char * __devinit pcibios_setup(char *str) return str; } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) +resource_size_t pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) { + return res->start; } int pcibios_enable_device(struct pci_dev *pdev, int mask) diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 5dc9e8c63fcd..924e40c916d3 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -60,22 +60,20 @@ skip_isa_ioresource_align(struct pci_dev *dev) { * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void +resource_size_t pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (skip_isa_ioresource_align(dev)) - return; - if (start & 0x300) { + return start; + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } } + return start; } EXPORT_SYMBOL(pcibios_align_resource); diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c index b7c073484e01..d7efab03164e 100644 --- a/arch/xtensa/kernel/pci.c +++ b/arch/xtensa/kernel/pci.c @@ -69,26 +69,25 @@ static int pci_bus_count; * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void +resource_size_t pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - if (size > 0x100) { printk(KERN_ERR "PCI: I/O Region %s/%d too large" " (%ld bytes)\n", pci_name(dev), dev->resource - res, size); } - if (start & 0x300) { + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } } + + return start; } int diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index cef28a79103f..d29d69a37940 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -36,8 +36,10 @@ int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, - void (*alignf)(void *, struct resource *, resource_size_t, - resource_size_t), + resource_size_t (*alignf)(void *, + struct resource *, + resource_size_t, + resource_size_t), void *alignf_data) { int i, ret = -ENOMEM; diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c index 52db17263d8b..f92a2dac13a2 100644 --- a/drivers/pcmcia/rsrc_mgr.c +++ b/drivers/pcmcia/rsrc_mgr.c @@ -114,22 +114,20 @@ struct pcmcia_align_data { unsigned long offset; }; -static void pcmcia_align(void *align_data, struct resource *res, - unsigned long size, unsigned long align) +static resource_size_t pcmcia_align(void *align_data, struct resource *res, + resource_size_t size, resource_size_t align) { struct pcmcia_align_data *data = align_data; - unsigned long start; + resource_size_t start; start = (res->start & ~data->mask) + data->offset; if (start < res->start) start += data->mask + 1; - res->start = start; #ifdef CONFIG_X86 if (res->flags & IORESOURCE_IO) { if (start & 0x300) { start = (start + 0x3ff) & ~0x3ff; - res->start = start; } } #endif @@ -137,9 +135,11 @@ static void pcmcia_align(void *align_data, struct resource *res, #ifdef CONFIG_M68K if (res->flags & IORESOURCE_IO) { if ((res->start + size - 1) >= 1024) - res->start = res->end; + start = res->end; } #endif + + return start; } diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 9b0dc433a8c3..b65902870e44 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -533,7 +533,7 @@ struct pcmcia_align_data { struct resource_map *map; }; -static void +static resource_size_t pcmcia_common_align(void *align_data, struct resource *res, resource_size_t size, resource_size_t align) { @@ -545,17 +545,18 @@ pcmcia_common_align(void *align_data, struct resource *res, start = (res->start & ~data->mask) + data->offset; if (start < res->start) start += data->mask + 1; - res->start = start; + return start; } -static void +static resource_size_t pcmcia_align(void *align_data, struct resource *res, resource_size_t size, resource_size_t align) { struct pcmcia_align_data *data = align_data; struct resource_map *m; + resource_size_t start; - pcmcia_common_align(data, res, size, align); + start = pcmcia_common_align(data, res, size, align); for (m = data->map->next; m != data->map; m = m->next) { unsigned long start = m->base; @@ -567,8 +568,7 @@ pcmcia_align(void *align_data, struct resource *res, resource_size_t size, * fit here. */ if (res->start < start) { - res->start = start; - pcmcia_common_align(data, res, size, align); + start = pcmcia_common_align(data, res, size, align); } /* @@ -586,7 +586,9 @@ pcmcia_align(void *align_data, struct resource *res, resource_size_t size, * If we failed to find something suitable, ensure we fail. */ if (m == data->map) - res->start = res->end; + start = res->end; + + return start; } /* diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 7129504e053d..f4195de4eb9d 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -120,8 +120,10 @@ extern void insert_resource_expand_to_fit(struct resource *root, struct resource extern int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, + struct resource *, + resource_size_t, + resource_size_t), void *alignf_data); int adjust_resource(struct resource *res, resource_size_t start, resource_size_t size); diff --git a/include/linux/pci.h b/include/linux/pci.h index 16f48e7506ed..1bd9f52b24b8 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -592,7 +592,8 @@ int __must_check pcibios_enable_device(struct pci_dev *, int mask); char *pcibios_setup(char *str); /* Used only when drivers/pci/setup.c is used */ -void pcibios_align_resource(void *, struct resource *, resource_size_t, +resource_size_t pcibios_align_resource(void *, struct resource *, + resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); @@ -827,8 +828,9 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, struct resource *, + resource_size_t, + resource_size_t), void *alignf_data); void pci_enable_bridges(struct pci_bus *bus); diff --git a/kernel/resource.c b/kernel/resource.c index af96c1e4b54b..e697f20e2288 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -303,8 +303,10 @@ int walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, static int find_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, + struct resource *, + resource_size_t, + resource_size_t), void *alignf_data) { struct resource *this = root->child; @@ -330,7 +332,7 @@ static int find_resource(struct resource *root, struct resource *new, tmp.end = max; tmp.start = ALIGN(tmp.start, align); if (alignf) - alignf(alignf_data, &tmp, size, align); + tmp.start = alignf(alignf_data, &tmp, size, align); if (tmp.start < tmp.end && tmp.end - tmp.start >= size - 1) { new->start = tmp.start; new->end = tmp.start + size - 1; @@ -358,8 +360,10 @@ static int find_resource(struct resource *root, struct resource *new, int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, + struct resource *, + resource_size_t, + resource_size_t), void *alignf_data) { int err; -- cgit v1.2.3 From 3b7a17fcdae532d29dffab9d564a28be08960988 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 1 Jan 2010 17:40:50 +0100 Subject: resource/PCI: mark struct resource as const Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas Cc: Yinghai Lu Signed-off-by: Dominik Brodowski Signed-off-by: Jesse Barnes --- arch/alpha/kernel/pci.c | 2 +- arch/arm/kernel/bios32.c | 2 +- arch/cris/arch-v32/drivers/pci/bios.c | 2 +- arch/frv/mb93090-mb00/pci-frv.c | 2 +- arch/ia64/pci/pci.c | 2 +- arch/mips/pci/pci.c | 2 +- arch/mips/pmc-sierra/yosemite/ht.c | 2 +- arch/mn10300/unit-asb2305/pci-asb2305.c | 2 +- arch/parisc/kernel/pci.c | 2 +- arch/powerpc/kernel/pci-common.c | 2 +- arch/sh/drivers/pci/pci.c | 2 +- arch/sparc/kernel/pci.c | 2 +- arch/sparc/kernel/pcic.c | 2 +- arch/x86/pci/i386.c | 2 +- arch/xtensa/kernel/pci.c | 4 ++-- drivers/pci/bus.c | 2 +- drivers/pcmcia/rsrc_mgr.c | 3 ++- drivers/pcmcia/rsrc_nonstatic.c | 6 +++--- include/linux/ioport.h | 2 +- include/linux/pci.h | 5 +++-- kernel/resource.c | 4 ++-- 21 files changed, 28 insertions(+), 26 deletions(-) (limited to 'drivers/pci') diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 5cf111ed851c..c9ab94ee1ca8 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -127,7 +127,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final); #define GB (1024*MB) resource_size_t -pcibios_align_resource(void *data, struct resource *res, +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index a7c85f84f06c..bd397e0b663e 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -616,7 +616,7 @@ char * __init pcibios_setup(char *str) * but we want to try to avoid allocating at 0x2900-0x2bff * which might be mirrored at 0x0100-0x03ff.. */ -resource_size_t pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { resource_size_t start = res->start; diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c index 5811e2f8945c..d4b9c36ddc0f 100644 --- a/arch/cris/arch-v32/drivers/pci/bios.c +++ b/arch/cris/arch-v32/drivers/pci/bios.c @@ -42,7 +42,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, } resource_size_t -pcibios_align_resource(void *data, struct resource *res, +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { resource_size_t start = res->start; diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index c947aa43f2a9..1ed15d7fea20 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -33,7 +33,7 @@ * which might have be mirrored at 0x0100-0x03ff.. */ resource_size_t -pcibios_align_resource(void *data, struct resource *res, +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { resource_size_t start = res->start; diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index ef574cd311d1..783c83bb2b49 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -548,7 +548,7 @@ pcibios_disable_device (struct pci_dev *dev) } resource_size_t -pcibios_align_resource (void *data, struct resource *res, +pcibios_align_resource (void *data, const struct resource *res, resource_size_t size, resource_size_t align) { return res->start; diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 9085988f7cf3..f87f5e188fa6 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -50,7 +50,7 @@ static int pci_initialized; * which might have be mirrored at 0x0100-0x03ff.. */ resource_size_t -pcibios_align_resource(void *data, struct resource *res, +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c index 5e410087b628..fd22597edb64 100644 --- a/arch/mips/pmc-sierra/yosemite/ht.c +++ b/arch/mips/pmc-sierra/yosemite/ht.c @@ -345,7 +345,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_enable_resources(dev); } -resource_size_t pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index b0b3758fba08..d6119b879a98 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -31,7 +31,7 @@ * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -resource_size_t pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { resource_size_t start = res->start; diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 4463a31973ba..5179e5e6f8fb 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -254,7 +254,7 @@ EXPORT_SYMBOL(pcibios_bus_to_resource); * Since we are just checking candidates, don't use any fields other * than res->start. */ -resource_size_t pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t alignment) { resource_size_t mask, align, start = res->start; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index d7eebbaf01f1..e640810e813f 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1181,7 +1181,7 @@ static int skip_isa_ioresource_align(struct pci_dev *dev) * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -resource_size_t pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index b36ca825b3d3..96213fd172ce 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -148,7 +148,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) * addresses to be allocated in the 0x000-0x0ff region * modulo 0x400. */ -resource_size_t pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index d56c1f34689e..37b66c60abe3 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -722,7 +722,7 @@ void pcibios_update_irq(struct pci_dev *pdev, int irq) { } -resource_size_t pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { return res->start; diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 46fda64ff163..75e88c00bca3 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -768,7 +768,7 @@ char * __devinit pcibios_setup(char *str) return str; } -resource_size_t pcibios_align_resource(void *data, struct resource *res, +resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { return res->start; diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 924e40c916d3..5a8fbf8d4cac 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -61,7 +61,7 @@ skip_isa_ioresource_align(struct pci_dev *dev) { * which might have be mirrored at 0x0100-0x03ff.. */ resource_size_t -pcibios_align_resource(void *data, struct resource *res, +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c index d7efab03164e..cd1026931203 100644 --- a/arch/xtensa/kernel/pci.c +++ b/arch/xtensa/kernel/pci.c @@ -70,8 +70,8 @@ static int pci_bus_count; * which might have be mirrored at 0x0100-0x03ff.. */ resource_size_t -pcibios_align_resource(void *data, struct resource *res, resource_size_t size, - resource_size_t align) +pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; resource_size_t start = res->start; diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index d29d69a37940..a26135bb0ffd 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -37,7 +37,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, resource_size_t (*alignf)(void *, - struct resource *, + const struct resource *, resource_size_t, resource_size_t), void *alignf_data) diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c index f92a2dac13a2..f8401a0ef89b 100644 --- a/drivers/pcmcia/rsrc_mgr.c +++ b/drivers/pcmcia/rsrc_mgr.c @@ -114,7 +114,8 @@ struct pcmcia_align_data { unsigned long offset; }; -static resource_size_t pcmcia_align(void *align_data, struct resource *res, +static resource_size_t pcmcia_align(void *align_data, + const struct resource *res, resource_size_t size, resource_size_t align) { struct pcmcia_align_data *data = align_data; diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index b65902870e44..45d75dc452f0 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -534,7 +534,7 @@ struct pcmcia_align_data { }; static resource_size_t -pcmcia_common_align(void *align_data, struct resource *res, +pcmcia_common_align(void *align_data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pcmcia_align_data *data = align_data; @@ -549,8 +549,8 @@ pcmcia_common_align(void *align_data, struct resource *res, } static resource_size_t -pcmcia_align(void *align_data, struct resource *res, resource_size_t size, - resource_size_t align) +pcmcia_align(void *align_data, const struct resource *res, + resource_size_t size, resource_size_t align) { struct pcmcia_align_data *data = align_data; struct resource_map *m; diff --git a/include/linux/ioport.h b/include/linux/ioport.h index f4195de4eb9d..4a811891dbe3 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -121,7 +121,7 @@ extern int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, resource_size_t (*alignf)(void *, - struct resource *, + const struct resource *, resource_size_t, resource_size_t), void *alignf_data); diff --git a/include/linux/pci.h b/include/linux/pci.h index 1bd9f52b24b8..449d51560fc2 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -592,7 +592,7 @@ int __must_check pcibios_enable_device(struct pci_dev *, int mask); char *pcibios_setup(char *str); /* Used only when drivers/pci/setup.c is used */ -resource_size_t pcibios_align_resource(void *, struct resource *, +resource_size_t pcibios_align_resource(void *, const struct resource *, resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); @@ -828,7 +828,8 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, - resource_size_t (*alignf)(void *, struct resource *, + resource_size_t (*alignf)(void *, + const struct resource *, resource_size_t, resource_size_t), void *alignf_data); diff --git a/kernel/resource.c b/kernel/resource.c index e697f20e2288..7fd123ad00aa 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -304,7 +304,7 @@ static int find_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, resource_size_t (*alignf)(void *, - struct resource *, + const struct resource *, resource_size_t, resource_size_t), void *alignf_data) @@ -361,7 +361,7 @@ int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, resource_size_t (*alignf)(void *, - struct resource *, + const struct resource *, resource_size_t, resource_size_t), void *alignf_data) -- cgit v1.2.3 From 6fcaf17ac7a512227112ac81c0e1a5862bab57a6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 6 Jan 2010 17:47:56 +0100 Subject: PCI hotplug: fix memory leaks Stanse found a cut&pasted memory leak in pciehp_queue_pushbutton_work and shpchp_queue_pushbutton_work. info is not freed/assigned on all paths. Fix that. Reviewed-by: Kenji Kaneshige Signed-off-by: Jiri Slaby Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_ctrl.c | 1 + drivers/pci/hotplug/shpchp_ctrl.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index d6ac1b261dd9..9a7f247e8ac1 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -341,6 +341,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work) p_slot->state = POWERON_STATE; break; default: + kfree(info); goto out; } queue_work(pciehp_wq, &info->work); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 179b1c1cb99b..3bba0c0888ff 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -453,6 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) p_slot->state = POWERON_STATE; break; default: + kfree(info); goto out; } queue_work(shpchp_wq, &info->work); -- cgit v1.2.3 From b0fc889c4311835ae7d02f433154bc20cad9ee11 Mon Sep 17 00:00:00 2001 From: Chandru Date: Mon, 11 Jan 2010 11:49:21 +0530 Subject: PCI hotplug: ibmphp: read the length of ebda and map entire ebda region ibmphp driver currently maps only 1KB of ebda memory area into kernel address space during driver initialization. This causes kernel oops when the driver is modprobe'd and it accesses memory beyond 1KB within ebda segment. The first byte of ebda segment actually stores the length of the ebda region in Kilobytes. Hence make use of the length parameter and map the entire ebda region. Signed-off-by: Chandru Siddalingappa Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/ibmphp_ebda.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index c1abac8ab5c3..7d3bf31d224d 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -245,7 +245,7 @@ static void __init print_ebda_hpc (void) int __init ibmphp_access_ebda (void) { - u8 format, num_ctlrs, rio_complete, hs_complete; + u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz; u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base; int rc = 0; @@ -260,7 +260,14 @@ int __init ibmphp_access_ebda (void) iounmap (io_mem); debug ("returned ebda segment: %x\n", ebda_seg); - io_mem = ioremap(ebda_seg<<4, 1024); + io_mem = ioremap(ebda_seg<<4, 1); + ebda_sz = readb(io_mem); + iounmap(io_mem); + debug("ebda size: %d(KiB)\n", ebda_sz); + if (ebda_sz == 0) + return -ENOMEM; + + io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024)); if (!io_mem ) return -ENOMEM; next_offset = 0x180; -- cgit v1.2.3 From 7cc5997d1dada3bdeed95a59c2f4f6c66cbb0767 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 22 Dec 2009 15:02:21 -0800 Subject: PCI: separate pci_setup_bridge to small functions This is a good cleanup in itself, and makes it easier to modify specific resource types in later code. Signed-off-by: Yinghai Lu Acked-by: Linus Torvalds Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 66 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 50 insertions(+), 16 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index c48cd377b3f5..1bd41ac2abd9 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -134,18 +134,12 @@ EXPORT_SYMBOL(pci_setup_cardbus); config space writes, so it's quite possible that an I/O window of the bridge will have some undesirable address (e.g. 0) after the first write. Ditto 64-bit prefetchable MMIO. */ -static void pci_setup_bridge(struct pci_bus *bus) +static void pci_setup_bridge_io(struct pci_bus *bus) { struct pci_dev *bridge = bus->self; struct resource *res; struct pci_bus_region region; - u32 l, bu, lu, io_upper16; - - if (pci_is_enabled(bridge)) - return; - - dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n", - bus->secondary, bus->subordinate); + u32 l, io_upper16; /* Set up the top and bottom of the PCI I/O segment for this bus. */ res = bus->resource[0]; @@ -158,8 +152,7 @@ static void pci_setup_bridge(struct pci_bus *bus) /* Set up upper 16 bits of I/O base/limit. */ io_upper16 = (region.end & 0xffff0000) | (region.start >> 16); dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { /* Clear upper 16 bits of I/O base/limit. */ io_upper16 = 0; l = 0x00f0; @@ -171,21 +164,35 @@ static void pci_setup_bridge(struct pci_bus *bus) pci_write_config_dword(bridge, PCI_IO_BASE, l); /* Update upper 16 bits of I/O base/limit. */ pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16); +} + +static void pci_setup_bridge_mmio(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + struct resource *res; + struct pci_bus_region region; + u32 l; - /* Set up the top and bottom of the PCI Memory segment - for this bus. */ + /* Set up the top and bottom of the PCI Memory segment for this bus. */ res = bus->resource[1]; pcibios_resource_to_bus(bridge, ®ion, res); if (res->flags & IORESOURCE_MEM) { l = (region.start >> 16) & 0xfff0; l |= region.end & 0xfff00000; dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { l = 0x0000fff0; dev_info(&bridge->dev, " bridge window [mem disabled]\n"); } pci_write_config_dword(bridge, PCI_MEMORY_BASE, l); +} + +static void pci_setup_bridge_mmio_pref(struct pci_bus *bus) +{ + struct pci_dev *bridge = bus->self; + struct resource *res; + struct pci_bus_region region; + u32 l, bu, lu; /* Clear out the upper 32 bits of PREF limit. If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily @@ -204,8 +211,7 @@ static void pci_setup_bridge(struct pci_bus *bus) lu = upper_32_bits(region.end); } dev_info(&bridge->dev, " bridge window %pR\n", res); - } - else { + } else { l = 0x0000fff0; dev_info(&bridge->dev, " bridge window [mem pref disabled]\n"); } @@ -214,10 +220,38 @@ static void pci_setup_bridge(struct pci_bus *bus) /* Set the upper 32 bits of PREF base & limit. */ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu); pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu); +} + +static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type) +{ + struct pci_dev *bridge = bus->self; + + if (pci_is_enabled(bridge)) + return; + + dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n", + bus->secondary, bus->subordinate); + + if (type & IORESOURCE_IO) + pci_setup_bridge_io(bus); + + if (type & IORESOURCE_MEM) + pci_setup_bridge_mmio(bus); + + if (type & IORESOURCE_PREFETCH) + pci_setup_bridge_mmio_pref(bus); pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl); } +static void pci_setup_bridge(struct pci_bus *bus) +{ + unsigned long type = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + __pci_setup_bridge(bus, type); +} + /* Check whether the bridge supports optional I/O and prefetchable memory ranges. If not, the respective base/limit registers must be read-only and read as 0. */ -- cgit v1.2.3 From 7c9342b8dd1a32386fc32bffb9eedebbfe264763 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 22 Dec 2009 15:02:24 -0800 Subject: PCI: don't dump resource when bus resource flags indicates unused Don't print out resources without flags to avoid cluttering up the debug output. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 1bd41ac2abd9..52fbd426a1c7 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -610,7 +610,8 @@ static void pci_bus_dump_res(struct pci_bus *bus) for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { struct resource *res = bus->resource[i]; - if (!res || !res->end) + + if (!res || !res->end || !res->flags) continue; dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res); -- cgit v1.2.3 From 41a68a748bbc61f5bcea999e33ba72926dfbe6f7 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 18 Jan 2010 17:24:10 +0100 Subject: PCI: push deprecated pci_find_device() function to last user The ISDN4Linux HiSax driver family contains the last remaining users of the deprecated pci_find_device() function. This patch creates a private copy of that function in HiSax, and removes the now unused global function together with its controlling configuration option, CONFIG_PCI_LEGACY. Signed-off-by: Tilman Schmidt Signed-off-by: Jesse Barnes --- drivers/isdn/hisax/Kconfig | 18 +++++++++--------- drivers/isdn/hisax/avm_pci.c | 6 +++--- drivers/isdn/hisax/bkm_a4t.c | 2 +- drivers/isdn/hisax/bkm_a8.c | 2 +- drivers/isdn/hisax/diva.c | 14 +++++++------- drivers/isdn/hisax/elsa.c | 8 ++++---- drivers/isdn/hisax/enternow_pci.c | 2 +- drivers/isdn/hisax/gazel.c | 8 ++++---- drivers/isdn/hisax/hfc_pci.c | 2 +- drivers/isdn/hisax/hisax.h | 23 +++++++++++++++++++++++ drivers/isdn/hisax/niccy.c | 6 +++--- drivers/isdn/hisax/nj_s.c | 2 +- drivers/isdn/hisax/nj_u.c | 2 +- drivers/isdn/hisax/sedlbauer.c | 6 +++--- drivers/isdn/hisax/telespci.c | 2 +- drivers/isdn/hisax/w6692.c | 2 +- drivers/pci/Kconfig | 11 ----------- drivers/pci/Makefile | 3 --- drivers/pci/legacy.c | 34 ---------------------------------- include/linux/pci.h | 13 ------------- 20 files changed, 64 insertions(+), 102 deletions(-) delete mode 100644 drivers/pci/legacy.c (limited to 'drivers/pci') diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index 3464ebc4cdbc..452fde9edf86 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -109,7 +109,7 @@ config HISAX_16_3 config HISAX_TELESPCI bool "Teles PCI" - depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the Teles PCI. See on how to configure it. @@ -237,7 +237,7 @@ config HISAX_MIC config HISAX_NETJET bool "NETjet card" - depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the NetJet from Traverse Technologies. @@ -248,7 +248,7 @@ config HISAX_NETJET config HISAX_NETJET_U bool "NETspider U card" - depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the Netspider U interface ISDN card from Traverse Technologies. @@ -287,7 +287,7 @@ config HISAX_HSTSAPHIR config HISAX_BKM_A4T bool "Telekom A4T card" - depends on PCI && PCI_LEGACY + depends on PCI help This enables HiSax support for the Telekom A4T card. @@ -297,7 +297,7 @@ config HISAX_BKM_A4T config HISAX_SCT_QUADRO bool "Scitel Quadro card" - depends on PCI && PCI_LEGACY + depends on PCI help This enables HiSax support for the Scitel Quadro card. @@ -316,7 +316,7 @@ config HISAX_GAZEL config HISAX_HFC_PCI bool "HFC PCI-Bus cards" - depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the HFC-S PCI 2BDS0 based cards. @@ -325,7 +325,7 @@ config HISAX_HFC_PCI config HISAX_W6692 bool "Winbond W6692 based cards" - depends on PCI && PCI_LEGACY + depends on PCI help This enables HiSax support for Winbond W6692 based PCI ISDN cards. @@ -341,7 +341,7 @@ config HISAX_HFC_SX config HISAX_ENTERNOW_PCI bool "Formula-n enter:now PCI card" - depends on HISAX_NETJET && PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) help This enables HiSax support for the Formula-n enter:now PCI ISDN card. @@ -412,7 +412,7 @@ config HISAX_HFC4S8S config HISAX_FRITZ_PCIPNP tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)" - depends on PCI && PCI_LEGACY && EXPERIMENTAL + depends on PCI && EXPERIMENTAL help This enables the driver for the AVM Fritz!Card PCI, Fritz!Card PCI v2 and Fritz!Card PnP. diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c index 7cabc5a19492..14295a155e71 100644 --- a/drivers/isdn/hisax/avm_pci.c +++ b/drivers/isdn/hisax/avm_pci.c @@ -822,7 +822,7 @@ static int __devinit avm_pnp_setup(struct IsdnCardState *cs) #endif /* __ISAPNP__ */ -#ifndef CONFIG_PCI_LEGACY +#ifndef CONFIG_PCI static int __devinit avm_pci_setup(struct IsdnCardState *cs) { @@ -835,7 +835,7 @@ static struct pci_dev *dev_avm __devinitdata = NULL; static int __devinit avm_pci_setup(struct IsdnCardState *cs) { - if ((dev_avm = pci_find_device(PCI_VENDOR_ID_AVM, + if ((dev_avm = hisax_find_pci_device(PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1, dev_avm))) { if (pci_enable_device(dev_avm)) @@ -864,7 +864,7 @@ static int __devinit avm_pci_setup(struct IsdnCardState *cs) return (1); } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ int __devinit setup_avm_pcipnp(struct IsdnCard *card) diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c index 9ca2ee54cc94..9f2009c0b69c 100644 --- a/drivers/isdn/hisax/bkm_a4t.c +++ b/drivers/isdn/hisax/bkm_a4t.c @@ -340,7 +340,7 @@ setup_bkm_a4t(struct IsdnCard *card) } else return (0); - while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN, + while ((dev_a4t = hisax_find_pci_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) { ret = a4t_pci_probe(dev_a4t, cs, &found, &pci_memaddr); if (!ret) diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c index e1ff4717a8a6..e775706c60e3 100644 --- a/drivers/isdn/hisax/bkm_a8.c +++ b/drivers/isdn/hisax/bkm_a8.c @@ -301,7 +301,7 @@ setup_sct_quadro(struct IsdnCard *card) (sub_vendor_id != PCI_VENDOR_ID_BERKOM))) return (0); if (cs->subtyp == SCT_1) { - while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX, + while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, dev_a8))) { sub_vendor_id = dev_a8->subsystem_vendor; diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c index 0b0c2e5d806b..780da9bda915 100644 --- a/drivers/isdn/hisax/diva.c +++ b/drivers/isdn/hisax/diva.c @@ -1148,7 +1148,7 @@ static int __devinit setup_diva_isapnp(struct IsdnCard *card) #endif /* ISAPNP */ -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *dev_diva __devinitdata = NULL; static struct pci_dev *dev_diva_u __devinitdata = NULL; static struct pci_dev *dev_diva201 __devinitdata = NULL; @@ -1159,21 +1159,21 @@ static int __devinit setup_diva_pci(struct IsdnCard *card) struct IsdnCardState *cs = card->cs; cs->subtyp = 0; - if ((dev_diva = pci_find_device(PCI_VENDOR_ID_EICON, + if ((dev_diva = hisax_find_pci_device(PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA20, dev_diva))) { if (pci_enable_device(dev_diva)) return(0); cs->subtyp = DIVA_PCI; cs->irq = dev_diva->irq; cs->hw.diva.cfg_reg = pci_resource_start(dev_diva, 2); - } else if ((dev_diva_u = pci_find_device(PCI_VENDOR_ID_EICON, + } else if ((dev_diva_u = hisax_find_pci_device(PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA20_U, dev_diva_u))) { if (pci_enable_device(dev_diva_u)) return(0); cs->subtyp = DIVA_PCI; cs->irq = dev_diva_u->irq; cs->hw.diva.cfg_reg = pci_resource_start(dev_diva_u, 2); - } else if ((dev_diva201 = pci_find_device(PCI_VENDOR_ID_EICON, + } else if ((dev_diva201 = hisax_find_pci_device(PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA201, dev_diva201))) { if (pci_enable_device(dev_diva201)) return(0); @@ -1183,7 +1183,7 @@ static int __devinit setup_diva_pci(struct IsdnCard *card) (ulong) ioremap(pci_resource_start(dev_diva201, 0), 4096); cs->hw.diva.cfg_reg = (ulong) ioremap(pci_resource_start(dev_diva201, 1), 4096); - } else if ((dev_diva202 = pci_find_device(PCI_VENDOR_ID_EICON, + } else if ((dev_diva202 = hisax_find_pci_device(PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA202, dev_diva202))) { if (pci_enable_device(dev_diva202)) return(0); @@ -1229,14 +1229,14 @@ static int __devinit setup_diva_pci(struct IsdnCard *card) return (1); /* card found */ } -#else /* if !CONFIG_PCI_LEGACY */ +#else /* if !CONFIG_PCI */ static int __devinit setup_diva_pci(struct IsdnCard *card) { return (-1); /* card not found; continue search */ } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ int __devinit setup_diva(struct IsdnCard *card) diff --git a/drivers/isdn/hisax/elsa.c b/drivers/isdn/hisax/elsa.c index aa29d1cf16af..23c41fcd864e 100644 --- a/drivers/isdn/hisax/elsa.c +++ b/drivers/isdn/hisax/elsa.c @@ -1025,7 +1025,7 @@ setup_elsa_pcmcia(struct IsdnCard *card) cs->irq); } -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *dev_qs1000 __devinitdata = NULL; static struct pci_dev *dev_qs3000 __devinitdata = NULL; @@ -1035,7 +1035,7 @@ setup_elsa_pci(struct IsdnCard *card) struct IsdnCardState *cs = card->cs; cs->subtyp = 0; - if ((dev_qs1000 = pci_find_device(PCI_VENDOR_ID_ELSA, + if ((dev_qs1000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA, PCI_DEVICE_ID_ELSA_MICROLINK, dev_qs1000))) { if (pci_enable_device(dev_qs1000)) return(0); @@ -1043,7 +1043,7 @@ setup_elsa_pci(struct IsdnCard *card) cs->irq = dev_qs1000->irq; cs->hw.elsa.cfg = pci_resource_start(dev_qs1000, 1); cs->hw.elsa.base = pci_resource_start(dev_qs1000, 3); - } else if ((dev_qs3000 = pci_find_device(PCI_VENDOR_ID_ELSA, + } else if ((dev_qs3000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA, PCI_DEVICE_ID_ELSA_QS3000, dev_qs3000))) { if (pci_enable_device(dev_qs3000)) return(0); @@ -1093,7 +1093,7 @@ setup_elsa_pci(struct IsdnCard *card) { return (1); } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ static int __devinit setup_elsa_common(struct IsdnCard *card) diff --git a/drivers/isdn/hisax/enternow_pci.c b/drivers/isdn/hisax/enternow_pci.c index 39f421ed8de8..26264abf1f58 100644 --- a/drivers/isdn/hisax/enternow_pci.c +++ b/drivers/isdn/hisax/enternow_pci.c @@ -406,7 +406,7 @@ setup_enternow_pci(struct IsdnCard *card) for ( ;; ) { - if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, + if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { ret = en_pci_probe(dev_netjet, cs); if (!ret) diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c index 0ea3b4607680..353982fc1436 100644 --- a/drivers/isdn/hisax/gazel.c +++ b/drivers/isdn/hisax/gazel.c @@ -531,7 +531,7 @@ setup_gazelisa(struct IsdnCard *card, struct IsdnCardState *cs) return (0); } -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *dev_tel __devinitdata = NULL; static int __devinit @@ -546,7 +546,7 @@ setup_gazelpci(struct IsdnCardState *cs) found = 0; seekcard = PCI_DEVICE_ID_PLX_R685; for (nbseek = 0; nbseek < 4; nbseek++) { - if ((dev_tel = pci_find_device(PCI_VENDOR_ID_PLX, + if ((dev_tel = hisax_find_pci_device(PCI_VENDOR_ID_PLX, seekcard, dev_tel))) { if (pci_enable_device(dev_tel)) return 1; @@ -620,7 +620,7 @@ setup_gazelpci(struct IsdnCardState *cs) return (0); } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ int __devinit setup_gazel(struct IsdnCard *card) @@ -640,7 +640,7 @@ setup_gazel(struct IsdnCard *card) return (0); } else { -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI if (setup_gazelpci(cs)) return (0); #else diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c index 10914731b304..917cc84065bd 100644 --- a/drivers/isdn/hisax/hfc_pci.c +++ b/drivers/isdn/hisax/hfc_pci.c @@ -1658,7 +1658,7 @@ setup_hfcpci(struct IsdnCard *card) i = 0; while (id_list[i].vendor_id) { - tmp_hfcpci = pci_find_device(id_list[i].vendor_id, + tmp_hfcpci = hisax_find_pci_device(id_list[i].vendor_id, id_list[i].device_id, dev_hfcpci); i++; diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h index 0685c1946969..832a87855ffb 100644 --- a/drivers/isdn/hisax/hisax.h +++ b/drivers/isdn/hisax/hisax.h @@ -1323,3 +1323,26 @@ void release_tei(struct IsdnCardState *cs); char *HiSax_getrev(const char *revision); int TeiNew(void); void TeiFree(void); + +#ifdef CONFIG_PCI + +#include + +/* adaptation wrapper for old usage + * WARNING! This is unfit for use in a PCI hotplug environment, + * as the returned PCI device can disappear at any moment in time. + * Callers should be converted to use pci_get_device() instead. + */ +static inline struct pci_dev *hisax_find_pci_device(unsigned int vendor, + unsigned int device, + struct pci_dev *from) +{ + struct pci_dev *pdev; + + pci_dev_get(from); + pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from); + pci_dev_put(pdev); + return pdev; +} + +#endif diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c index ef00633e1d2a..ccaa6e13310f 100644 --- a/drivers/isdn/hisax/niccy.c +++ b/drivers/isdn/hisax/niccy.c @@ -297,12 +297,12 @@ int __devinit setup_niccy(struct IsdnCard *card) return 0; } } else { -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *niccy_dev __devinitdata; u_int pci_ioaddr; cs->subtyp = 0; - if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM, + if ((niccy_dev = hisax_find_pci_device(PCI_VENDOR_ID_SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY, niccy_dev))) { if (pci_enable_device(niccy_dev)) @@ -354,7 +354,7 @@ int __devinit setup_niccy(struct IsdnCard *card) printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n"); printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n"); return 0; -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ } printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n", (cs->subtyp == 1) ? "PnP" : "PCI", diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c index 8d36ccc87d81..2344e7b33448 100644 --- a/drivers/isdn/hisax/nj_s.c +++ b/drivers/isdn/hisax/nj_s.c @@ -276,7 +276,7 @@ setup_netjet_s(struct IsdnCard *card) for ( ;; ) { - if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, + if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { ret = njs_pci_probe(dev_netjet, cs); if (!ret) diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c index d306c946ffba..095e974aed80 100644 --- a/drivers/isdn/hisax/nj_u.c +++ b/drivers/isdn/hisax/nj_u.c @@ -240,7 +240,7 @@ setup_netjet_u(struct IsdnCard *card) for ( ;; ) { - if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, + if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { ret = nju_pci_probe(dev_netjet, cs); if (!ret) diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c index 5569a522e2a1..69dfc8d29017 100644 --- a/drivers/isdn/hisax/sedlbauer.c +++ b/drivers/isdn/hisax/sedlbauer.c @@ -598,7 +598,7 @@ setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt) } #endif /* __ISAPNP__ */ -#ifdef CONFIG_PCI_LEGACY +#ifdef CONFIG_PCI static struct pci_dev *dev_sedl __devinitdata = NULL; static int __devinit @@ -607,7 +607,7 @@ setup_sedlbauer_pci(struct IsdnCard *card) struct IsdnCardState *cs = card->cs; u16 sub_vendor_id, sub_id; - if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET, + if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) { if (pci_enable_device(dev_sedl)) return(0); @@ -673,7 +673,7 @@ setup_sedlbauer_pci(struct IsdnCard *card) return (1); } -#endif /* CONFIG_PCI_LEGACY */ +#endif /* CONFIG_PCI */ int __devinit setup_sedlbauer(struct IsdnCard *card) diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c index 28b08de4673d..b85ceb3746ce 100644 --- a/drivers/isdn/hisax/telespci.c +++ b/drivers/isdn/hisax/telespci.c @@ -300,7 +300,7 @@ setup_telespci(struct IsdnCard *card) if (cs->typ != ISDN_CTYPE_TELESPCI) return (0); - if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) { + if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) { if (pci_enable_device(dev_tel)) return(0); cs->irq = dev_tel->irq; diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c index c4d862c11a60..9d6e864023fe 100644 --- a/drivers/isdn/hisax/w6692.c +++ b/drivers/isdn/hisax/w6692.c @@ -1007,7 +1007,7 @@ setup_w6692(struct IsdnCard *card) return (0); while (id_list[id_idx].vendor_id) { - dev_w6692 = pci_find_device(id_list[id_idx].vendor_id, + dev_w6692 = hisax_find_pci_device(id_list[id_idx].vendor_id, id_list[id_idx].device_id, dev_w6692); if (dev_w6692) { diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index b1ecefa2a23d..7858a117e80b 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -21,17 +21,6 @@ config PCI_MSI If you don't know what to do here, say N. -config PCI_LEGACY - bool "Enable deprecated pci_find_* API" - depends on PCI - default y - help - Say Y here if you want to include support for the deprecated - pci_find_device() API. Most drivers have been converted over - to using the proper hotplug APIs, so this option serves to - include/exclude only a few drivers that are still using this - API. - config PCI_DEBUG bool "PCI Debugging" depends on PCI && DEBUG_KERNEL diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index adb74253a996..8674c1ebe979 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -10,9 +10,6 @@ obj-$(CONFIG_SYSFS) += slot.o obj-$(CONFIG_PCI_QUIRKS) += quirks.o -obj-$(CONFIG_PCI_LEGACY) += legacy.o -CFLAGS_legacy.o += -Wno-deprecated-declarations - # Build PCI Express stuff if needed obj-$(CONFIG_PCIEPORTBUS) += pcie/ diff --git a/drivers/pci/legacy.c b/drivers/pci/legacy.c deleted file mode 100644 index 871f65c15936..000000000000 --- a/drivers/pci/legacy.c +++ /dev/null @@ -1,34 +0,0 @@ -#include -#include -#include -#include -#include "pci.h" - -/** - * pci_find_device - begin or continue searching for a PCI device by vendor/device id - * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids - * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids - * @from: Previous PCI device found in search, or %NULL for new search. - * - * Iterates through the list of known PCI devices. If a PCI device is found - * with a matching @vendor and @device, a pointer to its device structure is - * returned. Otherwise, %NULL is returned. - * A new search is initiated by passing %NULL as the @from argument. - * Otherwise if @from is not %NULL, searches continue from next device - * on the global list. - * - * NOTE: Do not use this function any more; use pci_get_device() instead, as - * the PCI device returned by this function can disappear at any moment in - * time. - */ -struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, - struct pci_dev *from) -{ - struct pci_dev *pdev; - - pci_dev_get(from); - pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from); - pci_dev_put(pdev); - return pdev; -} -EXPORT_SYMBOL(pci_find_device); diff --git a/include/linux/pci.h b/include/linux/pci.h index 449d51560fc2..8b79403cc072 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -646,12 +646,6 @@ extern void pci_sort_breadthfirst(void); /* Generic PCI functions exported to card drivers */ -#ifdef CONFIG_PCI_LEGACY -struct pci_dev __deprecated *pci_find_device(unsigned int vendor, - unsigned int device, - struct pci_dev *from); -#endif /* CONFIG_PCI_LEGACY */ - enum pci_lost_interrupt_reason { PCI_LOST_IRQ_NO_INFORMATION = 0, PCI_LOST_IRQ_DISABLE_MSI, @@ -1010,13 +1004,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) _PCI_NOP_ALL(read, *) _PCI_NOP_ALL(write,) -static inline struct pci_dev *pci_find_device(unsigned int vendor, - unsigned int device, - struct pci_dev *from) -{ - return NULL; -} - static inline struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from) -- cgit v1.2.3 From 0bf01c3c86d4b9ea279d6215420484db887f5db5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 20 Jan 2010 14:15:54 +0100 Subject: PCI: hotplug/cpcihp, fix pci device refcounting Stanse found an ommitted pci_dev_put on one error path in cpcihp_generic_init. The path is taken on !dev, but also when dev->hdr_type != PCI_HEADER_TYPE_BRIDGE. However it omits to pci_dev_put on the latter. As it is fine to pass NULL to pci_dev_put, put it in there uncoditionally. Signed-off-by: Jiri Slaby Cc: Scott Murray Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/cpcihp_generic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c index 148fb463b81c..fb3f84661bdc 100644 --- a/drivers/pci/hotplug/cpcihp_generic.c +++ b/drivers/pci/hotplug/cpcihp_generic.c @@ -162,6 +162,7 @@ static int __init cpcihp_generic_init(void) dev = pci_get_slot(bus, PCI_DEVFN(bridge_slot, 0)); if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { err("Invalid bridge device %s", bridge); + pci_dev_put(dev); return -EINVAL; } bus = dev->subordinate; -- cgit v1.2.3 From 4fb88c1a28a8dc302bdc09858e7cdafc97bef794 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 17 Jan 2010 14:01:41 -0700 Subject: PCI: Make pci_scan_slot more robust Yinghai pointed out that the new pci_scan_slot() crashes when called on an ARI-capable slot that is empty. Fix this by exiting early from pci_scan_slot if there is no device in the slot. Also make next_ari_func() robust against devices not existing in case the ARI capability is corrupt. ARI also requires that the devices be listed in order, so if we find a function listed that is out of order, stop scanning to prevent loops. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 9672760c7ade..233d1c275d96 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1222,11 +1222,19 @@ EXPORT_SYMBOL(pci_scan_single_device); static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn) { u16 cap; - unsigned pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); + unsigned pos, next_fn; + + if (!dev) + return 0; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); if (!pos) return 0; pci_read_config_word(dev, pos + 4, &cap); - return cap >> 8; + next_fn = cap >> 8; + if (next_fn <= fn) + return 0; + return next_fn; } static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn) @@ -1271,12 +1279,14 @@ int pci_scan_slot(struct pci_bus *bus, int devfn) return 0; /* Already scanned the entire slot */ dev = pci_scan_single_device(bus, devfn); - if (dev && !dev->is_added) /* new device? */ + if (!dev) + return 0; + if (!dev->is_added) nr++; if (pci_ari_enabled(bus)) next_fn = next_ari_fn; - else if (dev && dev->multifunction) + else if (dev->multifunction) next_fn = next_trad_fn; for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) { -- cgit v1.2.3 From 939fdc67350e15aeeea70457d5b4bc1116bb4fd5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 4 Feb 2010 12:12:23 -0800 Subject: PCI hotplug: fix ibmphp build error Add header file to fix build error: drivers/pci/hotplug/ibmphp_hpc.c:135: error: implicit declaration of function 'init_MUTEX' drivers/pci/hotplug/ibmphp_hpc.c:136: error: implicit declaration of function 'init_MUTEX_LOCKED' drivers/pci/hotplug/ibmphp_hpc.c:797: error: implicit declaration of function 'down' drivers/pci/hotplug/ibmphp_hpc.c:807: error: implicit declaration of function 'up' Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/ibmphp_hpc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c index c7084f0eca5a..1aaf3f32d3cd 100644 --- a/drivers/pci/hotplug/ibmphp_hpc.c +++ b/drivers/pci/hotplug/ibmphp_hpc.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include "ibmphp.h" -- cgit v1.2.3 From ba02b242bbf8e4e1bc63d62e8ccec33b4e5ea132 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 2 Feb 2010 14:45:54 -0800 Subject: PCI hotplug: check ioremap() return value in ibmphp_ebda.c check ioremap() return value. Cc: Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/ibmphp_ebda.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index 7d3bf31d224d..5becbdee4027 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -261,6 +261,8 @@ int __init ibmphp_access_ebda (void) debug ("returned ebda segment: %x\n", ebda_seg); io_mem = ioremap(ebda_seg<<4, 1); + if (!io_mem) + return -ENOMEM; ebda_sz = readb(io_mem); iounmap(io_mem); debug("ebda size: %d(KiB)\n", ebda_sz); -- cgit v1.2.3 From 5009b46025acb2d3955d2c93574604fba667ef39 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:20 -0800 Subject: PCI: add pci_bridge_release_resources and pci_bus_release_bridge_resources We use this in later patches to free resrouce ranges for reassignment in an effort to support a wider variety of PCI topologies. Signed-off-by: Yinghai Lu Reviewed-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 52fbd426a1c7..7371a5479a99 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -604,6 +604,88 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_assign_resources); +static void pci_bridge_release_resources(struct pci_bus *bus, + unsigned long type) +{ + int idx; + bool changed = false; + struct pci_dev *dev; + struct resource *r; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + dev = bus->self; + for (idx = PCI_BRIDGE_RESOURCES; idx <= PCI_BRIDGE_RESOURCE_END; + idx++) { + r = &dev->resource[idx]; + if ((r->flags & type_mask) != type) + continue; + if (!r->parent) + continue; + /* + * if there are children under that, we should release them + * all + */ + release_child_resources(r); + if (!release_resource(r)) { + dev_printk(KERN_DEBUG, &dev->dev, + "resource %d %pR released\n", idx, r); + /* keep the old size */ + r->end = resource_size(r) - 1; + r->start = 0; + r->flags = 0; + changed = true; + } + } + + if (changed) { + /* avoiding touch the one without PREF */ + if (type & IORESOURCE_PREFETCH) + type = IORESOURCE_PREFETCH; + __pci_setup_bridge(bus, type); + } +} + +enum release_type { + leaf_only, + whole_subtree, +}; +/* + * try to release pci bridge resources that is from leaf bridge, + * so we can allocate big new one later + */ +static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus, + unsigned long type, + enum release_type rel_type) +{ + struct pci_dev *dev; + bool is_leaf_bridge = true; + + list_for_each_entry(dev, &bus->devices, bus_list) { + struct pci_bus *b = dev->subordinate; + if (!b) + continue; + + is_leaf_bridge = false; + + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + continue; + + if (rel_type == whole_subtree) + pci_bus_release_bridge_resources(b, type, + whole_subtree); + } + + if (pci_is_root_bus(bus)) + return; + + if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI) + return; + + if ((rel_type == whole_subtree) || is_leaf_bridge) + pci_bridge_release_resources(bus, type); +} + static void pci_bus_dump_res(struct pci_bus *bus) { int i; -- cgit v1.2.3 From 568ddef8735d4a51a521ba6af026ee0c32281566 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:21 -0800 Subject: PCI: add failed_list to pci_bus_assign_resources This allows us to track failed allocations for later re-trying with reallocation. Signed-off-by: Yinghai Lu Reviewed-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 61 +++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 57 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 7371a5479a99..7e87ea8f3200 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -27,7 +27,52 @@ #include #include "pci.h" -static void pbus_assign_resources_sorted(const struct pci_bus *bus) +struct resource_list_x { + struct resource_list_x *next; + struct resource *res; + struct pci_dev *dev; + resource_size_t start; + resource_size_t end; + unsigned long flags; +}; + +static void add_to_failed_list(struct resource_list_x *head, + struct pci_dev *dev, struct resource *res) +{ + struct resource_list_x *list = head; + struct resource_list_x *ln = list->next; + struct resource_list_x *tmp; + + tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) { + pr_warning("add_to_failed_list: kmalloc() failed!\n"); + return; + } + + tmp->next = ln; + tmp->res = res; + tmp->dev = dev; + tmp->start = res->start; + tmp->end = res->end; + tmp->flags = res->flags; + list->next = tmp; +} + +static void free_failed_list(struct resource_list_x *head) +{ + struct resource_list_x *list, *tmp; + + for (list = head->next; list;) { + tmp = list; + list = list->next; + kfree(tmp); + } + + head->next = NULL; +} + +static void pbus_assign_resources_sorted(const struct pci_bus *bus, + struct resource_list_x *fail_head) { struct pci_dev *dev; struct resource *res; @@ -58,6 +103,8 @@ static void pbus_assign_resources_sorted(const struct pci_bus *bus) res = list->res; idx = res - &list->dev->resource[0]; if (pci_assign_resource(list->dev, idx)) { + if (fail_head && !pci_is_root_bus(list->dev->bus)) + add_to_failed_list(fail_head, list->dev, res); res->start = 0; res->end = 0; res->flags = 0; @@ -572,19 +619,20 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_size_bridges); -void __ref pci_bus_assign_resources(const struct pci_bus *bus) +static void __ref __pci_bus_assign_resources(const struct pci_bus *bus, + struct resource_list_x *fail_head) { struct pci_bus *b; struct pci_dev *dev; - pbus_assign_resources_sorted(bus); + pbus_assign_resources_sorted(bus, fail_head); list_for_each_entry(dev, &bus->devices, bus_list) { b = dev->subordinate; if (!b) continue; - pci_bus_assign_resources(b); + __pci_bus_assign_resources(b, fail_head); switch (dev->class >> 8) { case PCI_CLASS_BRIDGE_PCI: @@ -602,6 +650,11 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus) } } } + +void __ref pci_bus_assign_resources(const struct pci_bus *bus) +{ + __pci_bus_assign_resources(bus, NULL); +} EXPORT_SYMBOL(pci_bus_assign_resources); static void pci_bridge_release_resources(struct pci_bus *bus, -- cgit v1.2.3 From cd81e1ea1a4cda94aa5f3e942301cf0da497c262 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:22 -0800 Subject: PCI: reject mmio ranges starting at 0 on pci_bridge read We already track unassigned resources in struct resource, and this prevents us from overwriting resource flags and info in the unassigned case. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 233d1c275d96..d3009430eab6 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -316,13 +316,17 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) limit |= (io_limit_hi << 16); } - if (base <= limit) { + if (base && base <= limit) { res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; if (!res->start) res->start = base; if (!res->end) res->end = limit + 0xfff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [io %04lx - %04lx] reg reading\n", + base, limit); } res = child->resource[1]; @@ -330,11 +334,15 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo); base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16; limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; - if (base <= limit) { + if (base && base <= limit) { res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; res->start = base; res->end = limit + 0xfffff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n", + base, limit + 0xfffff); } res = child->resource[2]; @@ -366,7 +374,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) #endif } } - if (base <= limit) { + if (base && base <= limit) { res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; if (res->flags & PCI_PREF_RANGE_TYPE_64) @@ -374,6 +382,10 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->start = base; res->end = limit + 0xfffff; dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); + } else { + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window [mem 0x%08lx - %08lx pref] reg reading\n", + base, limit + 0xfffff); } } -- cgit v1.2.3 From d65245c3297ac63abc51a976d92f45f2195d2854 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:23 -0800 Subject: PCI: don't shrink bridge resources When clearing leaf bridge resources, trying to get a big enough one, we could shrink the bridge if there is no resource under it. Confirm against the old resource side to make sure we're increasing the allocation. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 7e87ea8f3200..f560814c557c 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -382,7 +382,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size) { struct pci_dev *dev; struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO); - unsigned long size = 0, size1 = 0; + unsigned long size = 0, size1 = 0, old_size; if (!b_res) return; @@ -407,12 +407,17 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size) } if (size < min_size) size = min_size; + old_size = resource_size(b_res); + if (old_size == 1) + old_size = 0; /* To be fixed in 2.5: we should have sort of HAVE_ISA flag in the struct pci_bus. */ #if defined(CONFIG_ISA) || defined(CONFIG_EISA) size = (size & 0xff) + ((size & ~0xffUL) << 2); #endif size = ALIGN(size + size1, 4096); + if (size < old_size) + size = old_size; if (!size) { if (b_res->start || b_res->end) dev_info(&bus->self->dev, "disabling bridge window " @@ -433,7 +438,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type, resource_size_t min_size) { struct pci_dev *dev; - resource_size_t min_align, align, size; + resource_size_t min_align, align, size, old_size; resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */ int order, max_order; struct resource *b_res = find_free_bus_resource(bus, type); @@ -483,6 +488,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, } if (size < min_size) size = min_size; + old_size = resource_size(b_res); + if (old_size == 1) + old_size = 0; + if (size < old_size) + size = old_size; align = 0; min_align = 0; -- cgit v1.2.3 From 977d17bb1749517b353874ccdc9b85abc7a58c2a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:24 -0800 Subject: PCI: update bridge resources to get more big ranges in PCI assign unssigned BIOS separates IO ranges between several IOHs, and on some slots, BIOS assigns resources to a bridge, but stops assigning resources to the device under that bridge, because the device needs a big resource. So: 1. allocate resources and record the failed device resources 2. clear the BIOS assigned resources of the parent bridge of failing device 3. go back and call pci assign unassigned 4. if it still fails, go up the tree, clear more bridges. and try again Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 114 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 112 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index f560814c557c..f76f6e90f3b9 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -780,11 +780,65 @@ static void pci_bus_dump_resources(struct pci_bus *bus) } } +static int __init pci_bus_get_depth(struct pci_bus *bus) +{ + int depth = 0; + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + int ret; + struct pci_bus *b = dev->subordinate; + if (!b) + continue; + + ret = pci_bus_get_depth(b); + if (ret + 1 > depth) + depth = ret + 1; + } + + return depth; +} +static int __init pci_get_max_depth(void) +{ + int depth = 0; + struct pci_bus *bus; + + list_for_each_entry(bus, &pci_root_buses, node) { + int ret; + + ret = pci_bus_get_depth(bus); + if (ret > depth) + depth = ret; + } + + return depth; +} + +/* + * first try will not touch pci bridge res + * second and later try will clear small leaf bridge res + * will stop till to the max deepth if can not find good one + */ void __init pci_assign_unassigned_resources(void) { struct pci_bus *bus; + int tried_times = 0; + enum release_type rel_type = leaf_only; + struct resource_list_x head, *list; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + unsigned long failed_type; + int max_depth = pci_get_max_depth(); + int pci_try_num; + + head.next = NULL; + pci_try_num = max_depth + 1; + printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n", + max_depth, pci_try_num); + +again: /* Depth first, calculate sizes and alignments of all subordinate buses. */ list_for_each_entry(bus, &pci_root_buses, node) { @@ -792,9 +846,65 @@ pci_assign_unassigned_resources(void) } /* Depth last, allocate resources and update the hardware. */ list_for_each_entry(bus, &pci_root_buses, node) { - pci_bus_assign_resources(bus); - pci_enable_bridges(bus); + __pci_bus_assign_resources(bus, &head); + } + tried_times++; + + /* any device complain? */ + if (!head.next) + goto enable_and_dump; + failed_type = 0; + for (list = head.next; list;) { + failed_type |= list->flags; + list = list->next; + } + /* + * io port are tight, don't try extra + * or if reach the limit, don't want to try more + */ + failed_type &= type_mask; + if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) { + free_failed_list(&head); + goto enable_and_dump; + } + + printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n", + tried_times + 1); + + /* third times and later will not check if it is leaf */ + if ((tried_times + 1) > 2) + rel_type = whole_subtree; + + /* + * Try to release leaf bridge's resources that doesn't fit resource of + * child device under that bridge + */ + for (list = head.next; list;) { + bus = list->dev->bus; + pci_bus_release_bridge_resources(bus, list->flags & type_mask, + rel_type); + list = list->next; } + /* restore size and flags */ + for (list = head.next; list;) { + struct resource *res = list->res; + + res->start = list->start; + res->end = list->end; + res->flags = list->flags; + if (list->dev->subordinate) + res->flags = 0; + + list = list->next; + } + free_failed_list(&head); + + goto again; + +enable_and_dump: + /* Depth last, update the hardware. */ + list_for_each_entry(bus, &pci_root_buses, node) + pci_enable_bridges(bus); /* dump the resource on buses */ list_for_each_entry(bus, &pci_root_buses, node) { -- cgit v1.2.3 From 6841ec681a88b66651e4563040b9c7a7ad25d7b5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:25 -0800 Subject: PCI: introduce pci_assign_unassigned_bridge_resources For use by pciehp. pci_setup_bridge() will not check enabled for the slot bridge, otherwise update res is not updated to bridge BAR. That is, bridge is already enabled for port service. Signed-off-by: Yinghai Lu Reviewed-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 116 +++++++++++++++++++++++++++++++++++++----------- include/linux/pci.h | 1 + 2 files changed, 90 insertions(+), 27 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index f76f6e90f3b9..b19a56b8b17a 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -71,35 +71,34 @@ static void free_failed_list(struct resource_list_x *head) head->next = NULL; } -static void pbus_assign_resources_sorted(const struct pci_bus *bus, - struct resource_list_x *fail_head) +static void __dev_sort_resources(struct pci_dev *dev, + struct resource_list *head) { - struct pci_dev *dev; - struct resource *res; - struct resource_list head, *list, *tmp; - int idx; + u16 class = dev->class >> 8; - head.next = NULL; - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 class = dev->class >> 8; + /* Don't touch classless devices or host bridges or ioapics. */ + if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST) + return; - /* Don't touch classless devices or host bridges or ioapics. */ - if (class == PCI_CLASS_NOT_DEFINED || - class == PCI_CLASS_BRIDGE_HOST) - continue; + /* Don't touch ioapic devices already enabled by firmware */ + if (class == PCI_CLASS_SYSTEM_PIC) { + u16 command; + pci_read_config_word(dev, PCI_COMMAND, &command); + if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) + return; + } - /* Don't touch ioapic devices already enabled by firmware */ - if (class == PCI_CLASS_SYSTEM_PIC) { - u16 command; - pci_read_config_word(dev, PCI_COMMAND, &command); - if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) - continue; - } + pdev_sort_resources(dev, head); +} - pdev_sort_resources(dev, &head); - } +static void __assign_resources_sorted(struct resource_list *head, + struct resource_list_x *fail_head) +{ + struct resource *res; + struct resource_list *list, *tmp; + int idx; - for (list = head.next; list;) { + for (list = head->next; list;) { res = list->res; idx = res - &list->dev->resource[0]; if (pci_assign_resource(list->dev, idx)) { @@ -115,6 +114,30 @@ static void pbus_assign_resources_sorted(const struct pci_bus *bus, } } +static void pdev_assign_resources_sorted(struct pci_dev *dev, + struct resource_list_x *fail_head) +{ + struct resource_list head; + + head.next = NULL; + __dev_sort_resources(dev, &head); + __assign_resources_sorted(&head, fail_head); + +} + +static void pbus_assign_resources_sorted(const struct pci_bus *bus, + struct resource_list_x *fail_head) +{ + struct pci_dev *dev; + struct resource_list head; + + head.next = NULL; + list_for_each_entry(dev, &bus->devices, bus_list) + __dev_sort_resources(dev, &head); + + __assign_resources_sorted(&head, fail_head); +} + void pci_setup_cardbus(struct pci_bus *bus) { struct pci_dev *bridge = bus->self; @@ -273,9 +296,6 @@ static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type) { struct pci_dev *bridge = bus->self; - if (pci_is_enabled(bridge)) - return; - dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n", bus->secondary, bus->subordinate); @@ -646,7 +666,8 @@ static void __ref __pci_bus_assign_resources(const struct pci_bus *bus, switch (dev->class >> 8) { case PCI_CLASS_BRIDGE_PCI: - pci_setup_bridge(b); + if (!pci_is_enabled(dev)) + pci_setup_bridge(b); break; case PCI_CLASS_BRIDGE_CARDBUS: @@ -667,6 +688,34 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_assign_resources); +static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge, + struct resource_list_x *fail_head) +{ + struct pci_bus *b; + + pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head); + + b = bridge->subordinate; + if (!b) + return; + + __pci_bus_assign_resources(b, fail_head); + + switch (bridge->class >> 8) { + case PCI_CLASS_BRIDGE_PCI: + pci_setup_bridge(b); + break; + + case PCI_CLASS_BRIDGE_CARDBUS: + pci_setup_cardbus(b); + break; + + default: + dev_info(&bridge->dev, "not setting up bridge for bus " + "%04x:%02x\n", pci_domain_nr(b), b->number); + break; + } +} static void pci_bridge_release_resources(struct pci_bus *bus, unsigned long type) { @@ -911,3 +960,16 @@ enable_and_dump: pci_bus_dump_resources(bus); } } + +void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) +{ + struct pci_bus *parent = bridge->subordinate; + int retval; + + pci_bus_size_bridges(parent); + __pci_bridge_assign_resources(bridge, NULL); + retval = pci_reenable_device(bridge); + pci_set_master(bridge); + pci_enable_bridges(parent); +} +EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources); diff --git a/include/linux/pci.h b/include/linux/pci.h index 8b79403cc072..f0c056780a1f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -801,6 +801,7 @@ void pci_bus_assign_resources(const struct pci_bus *bus); void pci_bus_size_bridges(struct pci_bus *bus); int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); +void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge); void pdev_enable_device(struct pci_dev *); void pdev_sort_resources(struct pci_dev *, struct resource_list *); int pci_enable_resources(struct pci_dev *, int mask); -- cgit v1.2.3 From 9789ac979b6b6ae6cc09f7b29c88e95ecb14ec39 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:26 -0800 Subject: PCI: pciehp: cleanup flow in pciehp_configure_device Move bus_size_bridges and assign resources out of pciehp_add_bridge() and do them all together, one time, including slot bridge, to avoid to calling assign resources several times when there are several bridges under the slot bridge. Using pci_assign_unassigned_bridge_resources. Signed-off-by: Yinghai Lu Reviewed-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_pci.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index 21733108adde..0a16444c14c9 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -53,17 +53,15 @@ static int __ref pciehp_add_bridge(struct pci_dev *dev) busnr = pci_scan_bridge(parent, dev, busnr, pass); if (!dev->subordinate) return -1; - pci_bus_size_bridges(dev->subordinate); - pci_bus_assign_resources(parent); - pci_enable_bridges(parent); - pci_bus_add_devices(parent); + return 0; } int pciehp_configure_device(struct slot *p_slot) { struct pci_dev *dev; - struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate; + struct pci_dev *bridge = p_slot->ctrl->pcie->port; + struct pci_bus *parent = bridge->subordinate; int num, fn; struct controller *ctrl = p_slot->ctrl; @@ -96,12 +94,25 @@ int pciehp_configure_device(struct slot *p_slot) (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) { pciehp_add_bridge(dev); } + pci_dev_put(dev); + } + + pci_assign_unassigned_bridge_resources(bridge); + + for (fn = 0; fn < 8; fn++) { + dev = pci_get_slot(parent, PCI_DEVFN(0, fn)); + if (!dev) + continue; + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + pci_dev_put(dev); + continue; + } pci_configure_slot(dev); pci_dev_put(dev); } - pci_bus_assign_resources(parent); pci_bus_add_devices(parent); + return 0; } -- cgit v1.2.3 From 32180e402f9ff1f3389c99edf3f393425e706080 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:27 -0800 Subject: PCI: pciehp: second try to get big range for pcie devices Handle the case where the slot bridge that doesn't get a pre-allocated resource big enough to handle its child resources.. For example pcie devices need 256M, but the bridge only gets 2M preallocated. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index b19a56b8b17a..ed545f669459 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -964,12 +964,61 @@ enable_and_dump: void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; + int tried_times = 0; + struct resource_list_x head, *list; int retval; + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_PREFETCH; + + head.next = NULL; +again: pci_bus_size_bridges(parent); - __pci_bridge_assign_resources(bridge, NULL); + __pci_bridge_assign_resources(bridge, &head); retval = pci_reenable_device(bridge); pci_set_master(bridge); pci_enable_bridges(parent); + + tried_times++; + + if (!head.next) + return; + + if (tried_times >= 2) { + /* still fail, don't need to try more */ + free_failed_list(&head); + return; + } + + printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n", + tried_times + 1); + + /* + * Try to release leaf bridge's resources that doesn't fit resource of + * child device under that bridge + */ + for (list = head.next; list;) { + struct pci_bus *bus = list->dev->bus; + unsigned long flags = list->flags; + + pci_bus_release_bridge_resources(bus, flags & type_mask, + whole_subtree); + list = list->next; + } + /* restore size and flags */ + for (list = head.next; list;) { + struct resource *res = list->res; + + res->start = list->start; + res->end = list->end; + res->flags = list->flags; + if (list->dev->subordinate) + res->flags = 0; + + list = list->next; + } + free_failed_list(&head); + + goto again; } EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources); -- cgit v1.2.3 From 9958610552c0bd7558b41cb8addbd865587f142a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:28 -0800 Subject: PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges Make pci_bridge_check_ranges() store the PCI_PREF_RANGE_TYPE_64 in addition to IORESOURCE_MEM_64. Just like pci_read_bridge_bases(). Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index ed545f669459..743ed8c48b9c 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -354,8 +354,11 @@ static void pci_bridge_check_ranges(struct pci_bus *bus) } if (pmem) { b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH; - if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) + if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == + PCI_PREF_RANGE_TYPE_64) { b_res[2].flags |= IORESOURCE_MEM_64; + b_res[2].flags |= PCI_PREF_RANGE_TYPE_64; + } } /* double check if bridge does support 64 bit pref */ -- cgit v1.2.3 From 58ff463396ad00828e922d50998787e97fd32512 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 17 Feb 2010 23:36:58 +0100 Subject: PCI PM: Add function for checking PME status of devices Add function pci_check_pme_status() that will check the PME status bit of given device and clear it along with the PME enable bit. It will be necessary for PCI run-time power management. Based on a patch from Shaohua Li Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 35 +++++++++++++++++++++++++++++++++++ drivers/pci/pci.h | 1 + 2 files changed, 36 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1f9be53c39ba..5723446544fd 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1194,6 +1194,41 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) return pcibios_set_pcie_reset_state(dev, state); } +/** + * pci_check_pme_status - Check if given device has generated PME. + * @dev: Device to check. + * + * Check the PME status of the device and if set, clear it and clear PME enable + * (if set). Return 'true' if PME status and PME enable were both set or + * 'false' otherwise. + */ +bool pci_check_pme_status(struct pci_dev *dev) +{ + int pmcsr_pos; + u16 pmcsr; + bool ret = false; + + if (!dev->pm_cap) + return false; + + pmcsr_pos = dev->pm_cap + PCI_PM_CTRL; + pci_read_config_word(dev, pmcsr_pos, &pmcsr); + if (!(pmcsr & PCI_PM_CTRL_PME_STATUS)) + return false; + + /* Clear PME status. */ + pmcsr |= PCI_PM_CTRL_PME_STATUS; + if (pmcsr & PCI_PM_CTRL_PME_ENABLE) { + /* Disable PME to avoid interrupt flood. */ + pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; + ret = true; + } + + pci_write_config_word(dev, pmcsr_pos, pmcsr); + + return ret; +} + /** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 5d169bc3ccd1..b95b0a077d31 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -49,6 +49,7 @@ struct pci_platform_pm_ops { extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state); extern void pci_disable_enabled_device(struct pci_dev *dev); +extern bool pci_check_pme_status(struct pci_dev *dev); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); -- cgit v1.2.3 From c7f486567c1d0acd2e4166c47069835b9f75e77b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 17 Feb 2010 23:39:08 +0100 Subject: PCI PM: PCIe PME root port service driver PCIe native PME detection mechanism is based on interrupts generated by root ports or event collectors every time a PCIe device sends a PME message upstream. Once a PME message has been sent by an endpoint device and received by its root port (or event collector in the case of root complex integrated endpoints), the Requester ID from the message header is registered in the root port's Root Status register. At the same time, the PME Status bit of the Root Status register is set to indicate that there's a PME to handle. If PCIe PME interrupt is enabled for the root port, it generates an interrupt once the PME Status has been set. After receiving the interrupt, the kernel can identify the PCIe device that generated the PME using the Requester ID from the root port's Root Status register. [For details, see PCI Express Base Specification, Rev. 2.0.] Implement a driver for the PCIe PME root port service working in accordance with the above description. Based on a patch from Shaohua Li . Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- Documentation/kernel-parameters.txt | 6 + drivers/pci/pcie/Kconfig | 4 + drivers/pci/pcie/Makefile | 2 + drivers/pci/pcie/pme/Makefile | 8 + drivers/pci/pcie/pme/pcie_pme.c | 493 +++++++++++++++++++++++++++++++++++ drivers/pci/pcie/pme/pcie_pme.h | 28 ++ drivers/pci/pcie/pme/pcie_pme_acpi.c | 54 ++++ include/linux/pci.h | 1 + 8 files changed, 596 insertions(+) create mode 100644 drivers/pci/pcie/pme/Makefile create mode 100644 drivers/pci/pcie/pme/pcie_pme.c create mode 100644 drivers/pci/pcie/pme/pcie_pme.h create mode 100644 drivers/pci/pcie/pme/pcie_pme_acpi.c (limited to 'drivers/pci') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e7848a0d99eb..747a2c8f62f3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1998,6 +1998,12 @@ and is between 256 and 4096 characters. It is defined in the file force Enable ASPM even on devices that claim not to support it. WARNING: Forcing ASPM on may cause system lockups. + pcie_pme= [PCIE,PM] Native PCIe PME signaling options: + off Do not use native PCIe PME signaling. + force Use native PCIe PME signaling even if the BIOS refuses + to allow the kernel to control the relevant PCIe config + registers. + pcmv= [HW,PCMCIA] BadgePAD 4 pd. [PARIDE] diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 5a0c6ad53f8e..b8b494b3e0d0 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -46,3 +46,7 @@ config PCIEASPM_DEBUG help This enables PCI Express ASPM debug support. It will add per-device interface to control ASPM. + +config PCIE_PME + def_bool y + depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile index 11f6bb1eae24..ea654545e7c4 100644 --- a/drivers/pci/pcie/Makefile +++ b/drivers/pci/pcie/Makefile @@ -11,3 +11,5 @@ obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o # Build PCI Express AER if needed obj-$(CONFIG_PCIEAER) += aer/ + +obj-$(CONFIG_PCIE_PME) += pme/ diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile new file mode 100644 index 000000000000..8b9238053080 --- /dev/null +++ b/drivers/pci/pcie/pme/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for PCI-Express Root Port PME signaling driver +# + +obj-$(CONFIG_PCIE_PME) += pmedriver.o + +pmedriver-objs := pcie_pme.o +pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c new file mode 100644 index 000000000000..b5f96fb3cd83 --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme.c @@ -0,0 +1,493 @@ +/* + * PCIe Native PME support + * + * Copyright (C) 2007 - 2009 Intel Corp + * Copyright (C) 2007 - 2009 Shaohua Li + * Copyright (C) 2009 Rafael J. Wysocki , Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../../pci.h" +#include "pcie_pme.h" + +#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ + +/* + * If set, this switch will prevent the PCIe root port PME service driver from + * being registered. Consequently, the interrupt-based PCIe PME signaling will + * not be used by any PCIe root ports in that case. + */ +static bool pcie_pme_disabled; + +/* + * The PCI Express Base Specification 2.0, Section 6.1.8, states the following: + * "In order to maintain compatibility with non-PCI Express-aware system + * software, system power management logic must be configured by firmware to use + * the legacy mechanism of signaling PME by default. PCI Express-aware system + * software must notify the firmware prior to enabling native, interrupt-based + * PME signaling." However, if the platform doesn't provide us with a suitable + * notification mechanism or the notification fails, it is not clear whether or + * not we are supposed to use the interrupt-based PCIe PME signaling. The + * switch below can be used to indicate the desired behaviour. When set, it + * will make the kernel use the interrupt-based PCIe PME signaling regardless of + * the platform notification status, although the kernel will attempt to notify + * the platform anyway. When unset, it will prevent the kernel from using the + * the interrupt-based PCIe PME signaling if the platform notification fails, + * which is the default. + */ +static bool pcie_pme_force_enable; + +static int __init pcie_pme_setup(char *str) +{ + if (!strcmp(str, "off")) + pcie_pme_disabled = true; + else if (!strcmp(str, "force")) + pcie_pme_force_enable = true; + return 1; +} +__setup("pcie_pme=", pcie_pme_setup); + +/** + * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME. + * @srv: PCIe PME root port service to use for carrying out the check. + * + * Notify the platform that the native PCIe PME is going to be used and return + * 'true' if the control of the PCIe PME registers has been acquired from the + * platform. + */ +static bool pcie_pme_platform_setup(struct pcie_device *srv) +{ + return !pcie_pme_platform_notify(srv) || pcie_pme_force_enable; +} + +struct pcie_pme_service_data { + spinlock_t lock; + struct pcie_device *srv; + struct work_struct work; + bool noirq; /* Don't enable the PME interrupt used by this service. */ +}; + +/** + * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation. + * @dev: PCIe root port or event collector. + * @enable: Enable or disable the interrupt. + */ +static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) +{ + int rtctl_pos; + u16 rtctl; + + rtctl_pos = pci_find_capability(dev, PCI_CAP_ID_EXP) + PCI_EXP_RTCTL; + + pci_read_config_word(dev, rtctl_pos, &rtctl); + if (enable) + rtctl |= PCI_EXP_RTCTL_PMEIE; + else + rtctl &= ~PCI_EXP_RTCTL_PMEIE; + pci_write_config_word(dev, rtctl_pos, rtctl); +} + +/** + * pcie_pme_clear_status - Clear root port PME interrupt status. + * @dev: PCIe root port or event collector. + */ +static void pcie_pme_clear_status(struct pci_dev *dev) +{ + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_find_capability(dev, PCI_CAP_ID_EXP) + PCI_EXP_RTSTA; + + pci_read_config_dword(dev, rtsta_pos, &rtsta); + rtsta |= PCI_EXP_RTSTA_PME; + pci_write_config_dword(dev, rtsta_pos, rtsta); +} + +/** + * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#. + * @bus: PCI bus to scan. + * + * Scan given PCI bus and all buses under it for devices asserting PME#. + */ +static bool pcie_pme_walk_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + bool ret = false; + + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Skip PCIe devices in case we started from a root port. */ + if (!dev->is_pcie && pci_check_pme_status(dev)) { + pm_request_resume(&dev->dev); + ret = true; + } + + if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate)) + ret = true; + } + + return ret; +} + +/** + * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME. + * @bus: Secondary bus of the bridge. + * @devfn: Device/function number to check. + * + * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band + * PCIe PME message. In such that case the bridge should use the Requester ID + * of device/function number 0 on its secondary bus. + */ +static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn) +{ + struct pci_dev *dev; + bool found = false; + + if (devfn) + return false; + + dev = pci_dev_get(bus->self); + if (!dev) + return false; + + if (dev->is_pcie && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { + down_read(&pci_bus_sem); + if (pcie_pme_walk_bus(bus)) + found = true; + up_read(&pci_bus_sem); + } + + pci_dev_put(dev); + return found; +} + +/** + * pcie_pme_handle_request - Find device that generated PME and handle it. + * @port: Root port or event collector that generated the PME interrupt. + * @req_id: PCIe Requester ID of the device that generated the PME. + */ +static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id) +{ + u8 busnr = req_id >> 8, devfn = req_id & 0xff; + struct pci_bus *bus; + struct pci_dev *dev; + bool found = false; + + /* First, check if the PME is from the root port itself. */ + if (port->devfn == devfn && port->bus->number == busnr) { + if (pci_check_pme_status(port)) { + pm_request_resume(&port->dev); + found = true; + } else { + /* + * Apparently, the root port generated the PME on behalf + * of a non-PCIe device downstream. If this is done by + * a root port, the Requester ID field in its status + * register may contain either the root port's, or the + * source device's information (PCI Express Base + * Specification, Rev. 2.0, Section 6.1.9). + */ + down_read(&pci_bus_sem); + found = pcie_pme_walk_bus(port->subordinate); + up_read(&pci_bus_sem); + } + goto out; + } + + /* Second, find the bus the source device is on. */ + bus = pci_find_bus(pci_domain_nr(port->bus), busnr); + if (!bus) + goto out; + + /* Next, check if the PME is from a PCIe-PCI bridge. */ + found = pcie_pme_from_pci_bridge(bus, devfn); + if (found) + goto out; + + /* Finally, try to find the PME source on the bus. */ + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_dev_get(dev); + if (dev->devfn == devfn) { + found = true; + break; + } + pci_dev_put(dev); + } + up_read(&pci_bus_sem); + + if (found) { + /* The device is there, but we have to check its PME status. */ + found = pci_check_pme_status(dev); + if (found) + pm_request_resume(&dev->dev); + pci_dev_put(dev); + } else if (devfn) { + /* + * The device is not there, but we can still try to recover by + * assuming that the PME was reported by a PCIe-PCI bridge that + * used devfn different from zero. + */ + dev_dbg(&port->dev, "PME interrupt generated for " + "non-existent device %02x:%02x.%d\n", + busnr, PCI_SLOT(devfn), PCI_FUNC(devfn)); + found = pcie_pme_from_pci_bridge(bus, 0); + } + + out: + if (!found) + dev_dbg(&port->dev, "Spurious native PME interrupt!\n"); +} + +/** + * pcie_pme_work_fn - Work handler for PCIe PME interrupt. + * @work: Work structure giving access to service data. + */ +static void pcie_pme_work_fn(struct work_struct *work) +{ + struct pcie_pme_service_data *data = + container_of(work, struct pcie_pme_service_data, work); + struct pci_dev *port = data->srv->port; + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_find_capability(port, PCI_CAP_ID_EXP) + PCI_EXP_RTSTA; + + spin_lock_irq(&data->lock); + + for (;;) { + if (data->noirq) + break; + + pci_read_config_dword(port, rtsta_pos, &rtsta); + if (rtsta & PCI_EXP_RTSTA_PME) { + /* + * Clear PME status of the port. If there are other + * pending PMEs, the status will be set again. + */ + pcie_pme_clear_status(port); + + spin_unlock_irq(&data->lock); + pcie_pme_handle_request(port, rtsta & 0xffff); + spin_lock_irq(&data->lock); + + continue; + } + + /* No need to loop if there are no more PMEs pending. */ + if (!(rtsta & PCI_EXP_RTSTA_PENDING)) + break; + + spin_unlock_irq(&data->lock); + cpu_relax(); + spin_lock_irq(&data->lock); + } + + if (!data->noirq) + pcie_pme_interrupt_enable(port, true); + + spin_unlock_irq(&data->lock); +} + +/** + * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt. + * @irq: Interrupt vector. + * @context: Interrupt context pointer. + */ +static irqreturn_t pcie_pme_irq(int irq, void *context) +{ + struct pci_dev *port; + struct pcie_pme_service_data *data; + int rtsta_pos; + u32 rtsta; + unsigned long flags; + + port = ((struct pcie_device *)context)->port; + data = get_service_data((struct pcie_device *)context); + + rtsta_pos = pci_find_capability(port, PCI_CAP_ID_EXP) + PCI_EXP_RTSTA; + + spin_lock_irqsave(&data->lock, flags); + pci_read_config_dword(port, rtsta_pos, &rtsta); + + if (!(rtsta & PCI_EXP_RTSTA_PME)) { + spin_unlock_irqrestore(&data->lock, flags); + return IRQ_NONE; + } + + pcie_pme_interrupt_enable(port, false); + spin_unlock_irqrestore(&data->lock, flags); + + /* We don't use pm_wq, because it's freezable. */ + schedule_work(&data->work); + + return IRQ_HANDLED; +} + +/** + * pcie_pme_set_native - Set the PME interrupt flag for given device. + * @dev: PCI device to handle. + * @ign: Ignored. + */ +static int pcie_pme_set_native(struct pci_dev *dev, void *ign) +{ + dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n"); + + device_set_run_wake(&dev->dev, true); + dev->pme_interrupt = true; + return 0; +} + +/** + * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port. + * @port: PCIe root port or event collector to handle. + * + * For each device below given root port, including the port itself (or for each + * root complex integrated endpoint if @port is a root complex event collector) + * set the flag indicating that it can signal run-time wake-up events via PCIe + * PME interrupts. + */ +static void pcie_pme_mark_devices(struct pci_dev *port) +{ + pcie_pme_set_native(port, NULL); + if (port->subordinate) { + pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL); + } else { + struct pci_bus *bus = port->bus; + struct pci_dev *dev; + + /* Check if this is a root port event collector. */ + if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus) + return; + + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) + if (dev->is_pcie + && dev->pcie_type == PCI_EXP_TYPE_RC_END) + pcie_pme_set_native(dev, NULL); + up_read(&pci_bus_sem); + } +} + +/** + * pcie_pme_probe - Initialize PCIe PME service for given root port. + * @srv: PCIe service to initialize. + */ +static int pcie_pme_probe(struct pcie_device *srv) +{ + struct pci_dev *port; + struct pcie_pme_service_data *data; + int ret; + + if (!pcie_pme_platform_setup(srv)) + return -EACCES; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->lock); + INIT_WORK(&data->work, pcie_pme_work_fn); + data->srv = srv; + set_service_data(srv, data); + + port = srv->port; + pcie_pme_interrupt_enable(port, false); + pcie_pme_clear_status(port); + + ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv); + if (ret) { + kfree(data); + } else { + pcie_pme_mark_devices(port); + pcie_pme_interrupt_enable(port, true); + } + + return ret; +} + +/** + * pcie_pme_suspend - Suspend PCIe PME service device. + * @srv: PCIe service device to suspend. + */ +static int pcie_pme_suspend(struct pcie_device *srv) +{ + struct pcie_pme_service_data *data = get_service_data(srv); + struct pci_dev *port = srv->port; + + spin_lock_irq(&data->lock); + pcie_pme_interrupt_enable(port, false); + pcie_pme_clear_status(port); + data->noirq = true; + spin_unlock_irq(&data->lock); + + synchronize_irq(srv->irq); + + return 0; +} + +/** + * pcie_pme_resume - Resume PCIe PME service device. + * @srv - PCIe service device to resume. + */ +static int pcie_pme_resume(struct pcie_device *srv) +{ + struct pcie_pme_service_data *data = get_service_data(srv); + struct pci_dev *port = srv->port; + + spin_lock_irq(&data->lock); + data->noirq = false; + pcie_pme_clear_status(port); + pcie_pme_interrupt_enable(port, true); + spin_unlock_irq(&data->lock); + + return 0; +} + +/** + * pcie_pme_remove - Prepare PCIe PME service device for removal. + * @srv - PCIe service device to resume. + */ +static void pcie_pme_remove(struct pcie_device *srv) +{ + pcie_pme_suspend(srv); + free_irq(srv->irq, srv); + kfree(get_service_data(srv)); +} + +static struct pcie_port_service_driver pcie_pme_driver = { + .name = "pcie_pme", + .port_type = PCI_EXP_TYPE_ROOT_PORT, + .service = PCIE_PORT_SERVICE_PME, + + .probe = pcie_pme_probe, + .suspend = pcie_pme_suspend, + .resume = pcie_pme_resume, + .remove = pcie_pme_remove, +}; + +/** + * pcie_pme_service_init - Register the PCIe PME service driver. + */ +static int __init pcie_pme_service_init(void) +{ + return pcie_pme_disabled ? + -ENODEV : pcie_port_service_register(&pcie_pme_driver); +} + +module_init(pcie_pme_service_init); diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h new file mode 100644 index 000000000000..b30d2b7c9775 --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme.h @@ -0,0 +1,28 @@ +/* + * drivers/pci/pcie/pme/pcie_pme.h + * + * PCI Express Root Port PME signaling support + * + * Copyright (C) 2009 Rafael J. Wysocki , Novell Inc. + */ + +#ifndef _PCIE_PME_H_ +#define _PCIE_PME_H_ + +struct pcie_device; + +#ifdef CONFIG_ACPI +extern int pcie_pme_acpi_setup(struct pcie_device *srv); + +static inline int pcie_pme_platform_notify(struct pcie_device *srv) +{ + return pcie_pme_acpi_setup(srv); +} +#else /* !CONFIG_ACPI */ +static inline int pcie_pme_platform_notify(struct pcie_device *srv) +{ + return 0; +} +#endif /* !CONFIG_ACPI */ + +#endif diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c new file mode 100644 index 000000000000..83ab2287ae3f --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme_acpi.c @@ -0,0 +1,54 @@ +/* + * PCIe Native PME support, ACPI-related part + * + * Copyright (C) 2009 Rafael J. Wysocki , Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include + +/** + * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME. + * @srv - PCIe PME service for a root port or event collector. + * + * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid + * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME + * control to the kernel. + */ +int pcie_pme_acpi_setup(struct pcie_device *srv) +{ + acpi_status status = AE_NOT_FOUND; + struct pci_dev *port = srv->port; + acpi_handle handle; + int error = 0; + + if (acpi_pci_disabled) + return -ENOSYS; + + dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n"); + + handle = acpi_find_root_bridge_handle(port); + if (!handle) + return -EINVAL; + + status = acpi_pci_osc_control_set(handle, + OSC_PCI_EXPRESS_PME_CONTROL | + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + if (ACPI_FAILURE(status)) { + dev_info(&port->dev, + "Failed to receive control of PCIe PME service: %s\n", + (status == AE_SUPPORT || status == AE_NOT_FOUND) ? + "no _OSC support" : "ACPI _OSC failed"); + error = -ENODEV; + } + + return error; +} diff --git a/include/linux/pci.h b/include/linux/pci.h index 578a0770961a..9fe4b2089b78 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -266,6 +266,7 @@ struct pci_dev { configuration space */ unsigned int pme_support:5; /* Bitmask of states from which PME# can be generated */ + unsigned int pme_interrupt:1; unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ -- cgit v1.2.3 From c39fae1416d59fd565606793f090cebe3720d50d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 17 Feb 2010 23:40:07 +0100 Subject: PCI PM: Make it possible to force using INTx for PCIe PME signaling Apparently, some machines may have problems with PCI run-time power management if MSIs are used for the native PCIe PME signaling. In particular, on the MSI Wind U-100 PCIe PME interrupts are not generated by a PCIe root port after a resume from suspend to RAM, if the system wake-up was triggered by a PME from the device attached to this port. [It doesn't help to free the interrupt on suspend and request it back on resume, even if that is done along with disabling the MSI and re-enabling it, respectively.] However, if INTx interrupts are used for this purpose on the same machine, everything works just fine. For this reason, add a kernel command line switch allowing one to request that MSIs be not used for the native PCIe PME signaling, introduce a DMI table allowing us to blacklist machines that need this switch to be set by default and put the MSI Wind U-100 into this table. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- Documentation/kernel-parameters.txt | 2 ++ drivers/pci/pcie/pme/pcie_pme.c | 14 +++++++++++++- drivers/pci/pcie/portdrv.h | 17 +++++++++++++++++ drivers/pci/pcie/portdrv_core.c | 12 ++++++++++-- drivers/pci/pcie/portdrv_pci.c | 27 +++++++++++++++++++++++++++ 5 files changed, 69 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 747a2c8f62f3..516225a864f9 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2003,6 +2003,8 @@ and is between 256 and 4096 characters. It is defined in the file force Use native PCIe PME signaling even if the BIOS refuses to allow the kernel to control the relevant PCIe config registers. + nomsi Do not use MSI for native PCIe PME signaling (this makes + all PCIe root ports use INTx for everything). pcmv= [HW,PCMCIA] BadgePAD 4 diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c index b5f96fb3cd83..51a69061b120 100644 --- a/drivers/pci/pcie/pme/pcie_pme.c +++ b/drivers/pci/pcie/pme/pcie_pme.c @@ -53,12 +53,22 @@ static bool pcie_pme_disabled; */ static bool pcie_pme_force_enable; +/* + * If this switch is set, MSI will not be used for PCIe PME signaling. This + * causes the PCIe port driver to use INTx interrupts only, but it turns out + * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based + * wake-up from system sleep states. + */ +bool pcie_pme_msi_disabled; + static int __init pcie_pme_setup(char *str) { if (!strcmp(str, "off")) pcie_pme_disabled = true; else if (!strcmp(str, "force")) pcie_pme_force_enable = true; + else if (!strcmp(str, "nomsi")) + pcie_pme_msi_disabled = true; return 1; } __setup("pcie_pme=", pcie_pme_setup); @@ -73,7 +83,9 @@ __setup("pcie_pme=", pcie_pme_setup); */ static bool pcie_pme_platform_setup(struct pcie_device *srv) { - return !pcie_pme_platform_notify(srv) || pcie_pme_force_enable; + if (!pcie_pme_platform_notify(srv)) + return true; + return pcie_pme_force_enable; } struct pcie_pme_service_data { diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index aaeb9d21cba5..813a5c3427b6 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -30,4 +30,21 @@ extern void pcie_port_device_remove(struct pci_dev *dev); extern int __must_check pcie_port_bus_register(void); extern void pcie_port_bus_unregister(void); +#ifdef CONFIG_PCIE_PME +extern bool pcie_pme_msi_disabled; + +static inline void pcie_pme_disable_msi(void) +{ + pcie_pme_msi_disabled = true; +} + +static inline bool pcie_pme_no_msi(void) +{ + return pcie_pme_msi_disabled; +} +#else /* !CONFIG_PCIE_PME */ +static inline void pcie_pme_disable_msi(void) {} +static inline bool pcie_pme_no_msi(void) { return false; } +#endif /* !CONFIG_PCIE_PME */ + #endif /* _PORTDRV_H_ */ diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index b174188ac121..0d34ff415399 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -186,16 +186,24 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask) */ static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask) { - int i, irq; + int i, irq = -1; + + /* We have to use INTx if MSI cannot be used for PCIe PME. */ + if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) { + if (dev->pin) + irq = dev->irq; + goto no_msi; + } /* Try to use MSI-X if supported */ if (!pcie_port_enable_msix(dev, irqs, mask)) return 0; + /* We're not going to use MSI-X, so try MSI and fall back to INTx */ - irq = -1; if (!pci_enable_msi(dev) || dev->pin) irq = dev->irq; + no_msi: for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) irqs[i] = irq; irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 13c8972886e6..127e8f169d9c 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "portdrv.h" #include "aer/aerdrv.h" @@ -273,10 +274,36 @@ static struct pci_driver pcie_portdriver = { .driver.pm = PCIE_PORTDRV_PM_OPS, }; +static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d) +{ + pr_notice("%s detected: will not use MSI for PCIe PME signaling\n", + d->ident); + pcie_pme_disable_msi(); + return 0; +} + +static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = { + /* + * Boxes that should not use MSI for PCIe PME signaling. + */ + { + .callback = dmi_pcie_pme_disable_msi, + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "MICRO-STAR INTERNATIONAL CO., LTD"), + DMI_MATCH(DMI_PRODUCT_NAME, "U-100"), + }, + }, + {} +}; + static int __init pcie_portdrv_init(void) { int retval; + dmi_check_system(pcie_portdrv_dmi_table); + retval = pcie_port_bus_register(); if (retval) { printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval); -- cgit v1.2.3 From b67ea76172d4b1922c4b3c46c8ea8e9fec1ff38c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 17 Feb 2010 23:44:09 +0100 Subject: PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett . Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/acpi/internal.h | 2 - drivers/acpi/pci_bind.c | 14 +++- drivers/acpi/pci_root.c | 8 ++ drivers/acpi/scan.c | 1 + drivers/pci/pci-acpi.c | 211 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci.c | 67 +++++++++++++++ drivers/pci/pci.h | 7 ++ include/acpi/acpi_bus.h | 4 + include/linux/pci-acpi.h | 7 ++ include/linux/pci.h | 1 + 10 files changed, 319 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index cb28e0502acc..9c4c962e46e3 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -36,8 +36,6 @@ static inline int acpi_debug_init(void) { return 0; } int acpi_power_init(void); int acpi_device_sleep_wake(struct acpi_device *dev, int enable, int sleep_state, int dev_state); -int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state); -int acpi_disable_wakeup_device_power(struct acpi_device *dev); int acpi_power_get_inferred_state(struct acpi_device *device); int acpi_power_transition(struct acpi_device *device, int state); extern int acpi_power_nocheck; diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index a5a77b78a723..2ef04098cc1d 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -26,7 +26,9 @@ #include #include #include +#include #include +#include #include #include @@ -38,7 +40,13 @@ static int acpi_pci_unbind(struct acpi_device *device) struct pci_dev *dev; dev = acpi_get_pci_dev(device->handle); - if (!dev || !dev->subordinate) + if (!dev) + goto out; + + device_set_run_wake(&dev->dev, false); + pci_acpi_remove_pm_notifier(device); + + if (!dev->subordinate) goto out; acpi_pci_irq_del_prt(dev->subordinate); @@ -62,6 +70,10 @@ static int acpi_pci_bind(struct acpi_device *device) if (!dev) return 0; + pci_acpi_add_pm_notifier(device, dev); + if (device->wakeup.flags.run_wake) + device_set_run_wake(&dev->dev, true); + /* * Install the 'bind' function to facilitate callbacks for * children of the P2P bridge. diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 64f55b6db73c..9cd8bedb1e5a 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -528,6 +529,10 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) if (flags != base_flags) acpi_pci_osc_support(root, flags); + pci_acpi_add_bus_pm_notifier(device, root->bus); + if (device->wakeup.flags.run_wake) + device_set_run_wake(root->bus->bridge, true); + return 0; end: @@ -549,6 +554,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type) { struct acpi_pci_root *root = acpi_driver_data(device); + device_set_run_wake(root->bus->bridge, false); + pci_acpi_remove_bus_pm_notifier(device); + kfree(root); return 0; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 7491a52ad97a..fb7fc24fe727 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -753,6 +753,7 @@ static void acpi_bus_set_run_wake_flags(struct acpi_device *device) acpi_event_status event_status; device->wakeup.run_wake_count = 0; + device->wakeup.flags.notifier_present = 0; /* Power button, Lid switch always enable wakeup */ if (!acpi_match_device_ids(device, button_device_ids)) { diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 7e2829538a4c..c0c73913833d 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -16,8 +16,144 @@ #include #include +#include #include "pci.h" +static DEFINE_MUTEX(pci_acpi_pm_notify_mtx); + +/** + * pci_acpi_wake_bus - Wake-up notification handler for root buses. + * @handle: ACPI handle of a device the notification is for. + * @event: Type of the signaled event. + * @context: PCI root bus to wake up devices on. + */ +static void pci_acpi_wake_bus(acpi_handle handle, u32 event, void *context) +{ + struct pci_bus *pci_bus = context; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_bus) + pci_pme_wakeup_bus(pci_bus); +} + +/** + * pci_acpi_wake_dev - Wake-up notification handler for PCI devices. + * @handle: ACPI handle of a device the notification is for. + * @event: Type of the signaled event. + * @context: PCI device object to wake up. + */ +static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) +{ + struct pci_dev *pci_dev = context; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) { + pci_check_pme_status(pci_dev); + pm_runtime_resume(&pci_dev->dev); + if (pci_dev->subordinate) + pci_pme_wakeup_bus(pci_dev->subordinate); + } +} + +/** + * add_pm_notifier - Register PM notifier for given ACPI device. + * @dev: ACPI device to add the notifier for. + * @context: PCI device or bus to check for PME status if an event is signaled. + * + * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of + * PM wake-up events. For example, wake-up events may be generated for bridges + * if one of the devices below the bridge is signaling PME, even if the bridge + * itself doesn't have a wake-up GPE associated with it. + */ +static acpi_status add_pm_notifier(struct acpi_device *dev, + acpi_notify_handler handler, + void *context) +{ + acpi_status status = AE_ALREADY_EXISTS; + + mutex_lock(&pci_acpi_pm_notify_mtx); + + if (dev->wakeup.flags.notifier_present) + goto out; + + status = acpi_install_notify_handler(dev->handle, + ACPI_SYSTEM_NOTIFY, + handler, context); + if (ACPI_FAILURE(status)) + goto out; + + dev->wakeup.flags.notifier_present = true; + + out: + mutex_unlock(&pci_acpi_pm_notify_mtx); + return status; +} + +/** + * remove_pm_notifier - Unregister PM notifier from given ACPI device. + * @dev: ACPI device to remove the notifier from. + */ +static acpi_status remove_pm_notifier(struct acpi_device *dev, + acpi_notify_handler handler) +{ + acpi_status status = AE_BAD_PARAMETER; + + mutex_lock(&pci_acpi_pm_notify_mtx); + + if (!dev->wakeup.flags.notifier_present) + goto out; + + status = acpi_remove_notify_handler(dev->handle, + ACPI_SYSTEM_NOTIFY, + handler); + if (ACPI_FAILURE(status)) + goto out; + + dev->wakeup.flags.notifier_present = false; + + out: + mutex_unlock(&pci_acpi_pm_notify_mtx); + return status; +} + +/** + * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus. + * @dev: ACPI device to add the notifier for. + * @pci_bus: PCI bus to walk checking for PME status if an event is signaled. + */ +acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, + struct pci_bus *pci_bus) +{ + return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus); +} + +/** + * pci_acpi_remove_bus_pm_notifier - Unregister PCI bus PM notifier. + * @dev: ACPI device to remove the notifier from. + */ +acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev) +{ + return remove_pm_notifier(dev, pci_acpi_wake_bus); +} + +/** + * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device. + * @dev: ACPI device to add the notifier for. + * @pci_dev: PCI device to check for the PME status if an event is signaled. + */ +acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, + struct pci_dev *pci_dev) +{ + return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev); +} + +/** + * pci_acpi_remove_pm_notifier - Unregister PCI device PM notifier. + * @dev: ACPI device to remove the notifier from. + */ +acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev) +{ + return remove_pm_notifier(dev, pci_acpi_wake_dev); +} + /* * _SxD returns the D-state with the highest power * (lowest D-state number) supported in the S-state "x". @@ -131,12 +267,87 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) return 0; } +/** + * acpi_dev_run_wake - Enable/disable wake-up for given device. + * @phys_dev: Device to enable/disable the platform to wake-up the system for. + * @enable: Whether enable or disable the wake-up functionality. + * + * Find the ACPI device object corresponding to @pci_dev and try to + * enable/disable the GPE associated with it. + */ +static int acpi_dev_run_wake(struct device *phys_dev, bool enable) +{ + struct acpi_device *dev; + acpi_handle handle; + int error = -ENODEV; + + if (!device_run_wake(phys_dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(phys_dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { + dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", + __func__); + return -ENODEV; + } + + if (enable) { + if (!dev->wakeup.run_wake_count++) { + acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); + acpi_enable_gpe(dev->wakeup.gpe_device, + dev->wakeup.gpe_number, + ACPI_GPE_TYPE_RUNTIME); + } + } else if (dev->wakeup.run_wake_count > 0) { + if (!--dev->wakeup.run_wake_count) { + acpi_disable_gpe(dev->wakeup.gpe_device, + dev->wakeup.gpe_number, + ACPI_GPE_TYPE_RUNTIME); + acpi_disable_wakeup_device_power(dev); + } + } else { + error = -EALREADY; + } + + return error; +} + +static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) +{ + while (bus->parent) { + struct pci_dev *bridge = bus->self; + + if (bridge->pme_interrupt) + return; + if (!acpi_dev_run_wake(&bridge->dev, enable)) + return; + bus = bus->parent; + } + + /* We have reached the root bus. */ + if (bus->bridge) + acpi_dev_run_wake(bus->bridge, enable); +} + +static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) +{ + if (dev->pme_interrupt) + return 0; + + if (!acpi_dev_run_wake(&dev->dev, enable)) + return 0; + + acpi_pci_propagate_run_wake(dev->bus, enable); + return 0; +} + static struct pci_platform_pm_ops acpi_pci_platform_pm = { .is_manageable = acpi_pci_power_manageable, .set_state = acpi_pci_set_power_state, .choose_state = acpi_pci_choose_state, .can_wakeup = acpi_pci_can_wakeup, .sleep_wake = acpi_pci_sleep_wake, + .run_wake = acpi_pci_run_wake, }; /* ACPI bus type */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5723446544fd..df55a2f351b3 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include "pci.h" @@ -462,6 +463,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) pci_platform_pm->sleep_wake(dev, enable) : -ENODEV; } +static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable) +{ + return pci_platform_pm ? + pci_platform_pm->run_wake(dev, enable) : -ENODEV; +} + /** * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device @@ -1229,6 +1236,31 @@ bool pci_check_pme_status(struct pci_dev *dev) return ret; } +/** + * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set. + * @dev: Device to handle. + * @ign: Ignored. + * + * Check if @dev has generated PME and queue a resume request for it in that + * case. + */ +static int pci_pme_wakeup(struct pci_dev *dev, void *ign) +{ + if (pci_check_pme_status(dev)) + pm_request_resume(&dev->dev); + return 0; +} + +/** + * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary. + * @bus: Top bus of the subtree to walk. + */ +void pci_pme_wakeup_bus(struct pci_bus *bus) +{ + if (bus) + pci_walk_bus(bus, pci_pme_wakeup, NULL); +} + /** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. @@ -1433,6 +1465,41 @@ int pci_back_from_sleep(struct pci_dev *dev) return pci_set_power_state(dev, PCI_D0); } +/** + * pci_dev_run_wake - Check if device can generate run-time wake-up events. + * @dev: Device to check. + * + * Return true if the device itself is cabable of generating wake-up events + * (through the platform or using the native PCIe PME) or if the device supports + * PME and one of its upstream bridges can generate wake-up events. + */ +bool pci_dev_run_wake(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + + if (device_run_wake(&dev->dev)) + return true; + + if (!dev->pme_support) + return false; + + while (bus->parent) { + struct pci_dev *bridge = bus->self; + + if (device_run_wake(&bridge->dev)) + return true; + + bus = bus->parent; + } + + /* We have reached the root bus. */ + if (bus->bridge) + return device_run_wake(bus->bridge); + + return false; +} +EXPORT_SYMBOL_GPL(pci_dev_run_wake); + /** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index b95b0a077d31..286c50821949 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -35,6 +35,10 @@ int pci_probe_reset_function(struct pci_dev *dev); * * @sleep_wake: enables/disables the system wake up capability of given device * + * @run_wake: enables/disables the platform to generate run-time wake-up events + * for given device (the device's wake-up capability has to be + * enabled by @sleep_wake for this feature to work) + * * If given platform is generally capable of power managing PCI devices, all of * these callbacks are mandatory. */ @@ -44,12 +48,15 @@ struct pci_platform_pm_ops { pci_power_t (*choose_state)(struct pci_dev *dev); bool (*can_wakeup)(struct pci_dev *dev); int (*sleep_wake)(struct pci_dev *dev, bool enable); + int (*run_wake)(struct pci_dev *dev, bool enable); }; extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state); extern void pci_disable_enabled_device(struct pci_dev *dev); extern bool pci_check_pme_status(struct pci_dev *dev); +extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign); +extern void pci_pme_wakeup_bus(struct pci_bus *bus); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 60fcff419352..54508ccea023 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -243,6 +243,7 @@ struct acpi_device_wakeup_flags { u8 valid:1; /* Can successfully enable wakeup? */ u8 run_wake:1; /* Run-Wake GPE devices */ u8 always_enabled:1; /* Run-wake devices that are always enabled */ + u8 notifier_present:1; /* Wake-up notify handler has been installed */ }; struct acpi_device_wakeup_state { @@ -388,6 +389,9 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle); #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle)) +int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state); +int acpi_disable_wakeup_device_power(struct acpi_device *dev); + #ifdef CONFIG_PM_SLEEP int acpi_pm_device_sleep_state(struct device *, int *); int acpi_pm_device_sleep_wake(struct device *, bool); diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 93a7c08f869d..c8b6473c5f42 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -11,6 +11,13 @@ #include #ifdef CONFIG_ACPI +extern acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, + struct pci_bus *pci_bus); +extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev); +extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, + struct pci_dev *pci_dev); +extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev); + static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { struct pci_bus *pbus = pdev->bus; diff --git a/include/linux/pci.h b/include/linux/pci.h index 9fe4b2089b78..3f787ce78bd1 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -782,6 +782,7 @@ int pci_wake_from_d3(struct pci_dev *dev, bool enable); pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +bool pci_dev_run_wake(struct pci_dev *dev); /* For use by arch with custom probe code */ void set_pcie_port_type(struct pci_dev *pdev); -- cgit v1.2.3 From 552be54cc4232dc5acc49ccb372129d6f1b6923f Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 22 Feb 2010 14:12:24 +0900 Subject: PCIe PME: use pci_is_pcie() Use pci_is_pcie() instead of looking at obsolete is_pcie field in struct pci_dev. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pcie/pme/pcie_pme.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c index 51a69061b120..6b516309c094 100644 --- a/drivers/pci/pcie/pme/pcie_pme.c +++ b/drivers/pci/pcie/pme/pcie_pme.c @@ -144,7 +144,7 @@ static bool pcie_pme_walk_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { /* Skip PCIe devices in case we started from a root port. */ - if (!dev->is_pcie && pci_check_pme_status(dev)) { + if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) { pm_request_resume(&dev->dev); ret = true; } @@ -177,7 +177,7 @@ static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn) if (!dev) return false; - if (dev->is_pcie && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { + if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { down_read(&pci_bus_sem); if (pcie_pme_walk_bus(bus)) found = true; @@ -389,7 +389,7 @@ static void pcie_pme_mark_devices(struct pci_dev *port) down_read(&pci_bus_sem); list_for_each_entry(dev, &bus->devices, bus_list) - if (dev->is_pcie + if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_RC_END) pcie_pme_set_native(dev, NULL); up_read(&pci_bus_sem); -- cgit v1.2.3 From 6cbf82148ff286ec22a55be6836c3a5bffc489c1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 17 Feb 2010 23:44:58 +0100 Subject: PCI PM: Run-time callbacks for PCI bus type Introduce run-time PM callbacks for the PCI bus type. Make the new callbacks work in analogy with the existing system sleep PM callbacks, so that the drivers already converted to struct dev_pm_ops can use their suspend and resume routines for run-time PM without modifications. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 160 +++++++++++++++++++++++++++++++++++++++-------- drivers/pci/pci.c | 43 +++++++++++-- drivers/pci/pci.h | 1 + include/linux/pci.h | 9 ++- kernel/power/Kconfig | 5 ++ 5 files changed, 184 insertions(+), 34 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index e5d47be3c6d7..f9a0aec3abcf 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "pci.h" struct pci_dynid { @@ -404,6 +405,35 @@ static void pci_device_shutdown(struct device *dev) pci_msix_shutdown(pci_dev); } +#ifdef CONFIG_PM_OPS + +/* Auxiliary functions used for system resume and run-time resume. */ + +/** + * pci_restore_standard_config - restore standard config registers of PCI device + * @pci_dev: PCI device to handle + */ +static int pci_restore_standard_config(struct pci_dev *pci_dev) +{ + pci_update_current_state(pci_dev, PCI_UNKNOWN); + + if (pci_dev->current_state != PCI_D0) { + int error = pci_set_power_state(pci_dev, PCI_D0); + if (error) + return error; + } + + return pci_restore_state(pci_dev); +} + +static void pci_pm_default_resume_early(struct pci_dev *pci_dev) +{ + pci_restore_standard_config(pci_dev); + pci_fixup_device(pci_fixup_resume_early, pci_dev); +} + +#endif + #ifdef CONFIG_PM_SLEEP /* @@ -520,29 +550,6 @@ static int pci_legacy_resume(struct device *dev) /* Auxiliary functions used by the new power management framework */ -/** - * pci_restore_standard_config - restore standard config registers of PCI device - * @pci_dev: PCI device to handle - */ -static int pci_restore_standard_config(struct pci_dev *pci_dev) -{ - pci_update_current_state(pci_dev, PCI_UNKNOWN); - - if (pci_dev->current_state != PCI_D0) { - int error = pci_set_power_state(pci_dev, PCI_D0); - if (error) - return error; - } - - return pci_restore_state(pci_dev); -} - -static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) -{ - pci_restore_standard_config(pci_dev); - pci_fixup_device(pci_fixup_resume_early, pci_dev); -} - static void pci_pm_default_resume(struct pci_dev *pci_dev) { pci_fixup_device(pci_fixup_resume, pci_dev); @@ -581,6 +588,17 @@ static int pci_pm_prepare(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * PCI devices suspended at run time need to be resumed at this + * point, because in general it is necessary to reconfigure them for + * system suspend. Namely, if the device is supposed to wake up the + * system from the sleep state, we may need to reconfigure it for this + * purpose. In turn, if the device is not supposed to wake up the + * system from the sleep state, we'll have to prevent it from signaling + * wake-up. + */ + pm_runtime_resume(dev); + if (drv && drv->pm && drv->pm->prepare) error = drv->pm->prepare(dev); @@ -595,6 +613,13 @@ static void pci_pm_complete(struct device *dev) drv->pm->complete(dev); } +#else /* !CONFIG_PM_SLEEP */ + +#define pci_pm_prepare NULL +#define pci_pm_complete NULL + +#endif /* !CONFIG_PM_SLEEP */ + #ifdef CONFIG_SUSPEND static int pci_pm_suspend(struct device *dev) @@ -681,7 +706,7 @@ static int pci_pm_resume_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; - pci_pm_default_resume_noirq(pci_dev); + pci_pm_default_resume_early(pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); @@ -879,7 +904,7 @@ static int pci_pm_restore_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; - pci_pm_default_resume_noirq(pci_dev); + pci_pm_default_resume_early(pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); @@ -931,6 +956,84 @@ static int pci_pm_restore(struct device *dev) #endif /* !CONFIG_HIBERNATION */ +#ifdef CONFIG_PM_RUNTIME + +static int pci_pm_runtime_suspend(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + pci_power_t prev = pci_dev->current_state; + int error; + + if (!pm || !pm->runtime_suspend) + return -ENOSYS; + + error = pm->runtime_suspend(dev); + suspend_report_result(pm->runtime_suspend, error); + if (error) + return error; + + pci_fixup_device(pci_fixup_suspend, pci_dev); + + if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 + && pci_dev->current_state != PCI_UNKNOWN) { + WARN_ONCE(pci_dev->current_state != prev, + "PCI PM: State of device not saved by %pF\n", + pm->runtime_suspend); + return 0; + } + + if (!pci_dev->state_saved) + pci_save_state(pci_dev); + + pci_finish_runtime_suspend(pci_dev); + + return 0; +} + +static int pci_pm_runtime_resume(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + if (!pm || !pm->runtime_resume) + return -ENOSYS; + + pci_pm_default_resume_early(pci_dev); + __pci_enable_wake(pci_dev, PCI_D0, true, false); + pci_fixup_device(pci_fixup_resume, pci_dev); + + return pm->runtime_resume(dev); +} + +static int pci_pm_runtime_idle(struct device *dev) +{ + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + + if (!pm) + return -ENOSYS; + + if (pm->runtime_idle) { + int ret = pm->runtime_idle(dev); + if (ret) + return ret; + } + + pm_runtime_suspend(dev); + + return 0; +} + +#else /* !CONFIG_PM_RUNTIME */ + +#define pci_pm_runtime_suspend NULL +#define pci_pm_runtime_resume NULL +#define pci_pm_runtime_idle NULL + +#endif /* !CONFIG_PM_RUNTIME */ + +#ifdef CONFIG_PM_OPS + const struct dev_pm_ops pci_dev_pm_ops = { .prepare = pci_pm_prepare, .complete = pci_pm_complete, @@ -946,15 +1049,18 @@ const struct dev_pm_ops pci_dev_pm_ops = { .thaw_noirq = pci_pm_thaw_noirq, .poweroff_noirq = pci_pm_poweroff_noirq, .restore_noirq = pci_pm_restore_noirq, + .runtime_suspend = pci_pm_runtime_suspend, + .runtime_resume = pci_pm_runtime_resume, + .runtime_idle = pci_pm_runtime_idle, }; #define PCI_PM_OPS_PTR (&pci_dev_pm_ops) -#else /* !CONFIG_PM_SLEEP */ +#else /* !COMFIG_PM_OPS */ #define PCI_PM_OPS_PTR NULL -#endif /* !CONFIG_PM_SLEEP */ +#endif /* !COMFIG_PM_OPS */ /** * __pci_register_driver - register a new pci driver diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index df55a2f351b3..d62a5de81672 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1302,9 +1302,10 @@ void pci_pme_active(struct pci_dev *dev, bool enable) } /** - * pci_enable_wake - enable PCI device as wakeup event source + * __pci_enable_wake - enable PCI device as wakeup event source * @dev: PCI device affected * @state: PCI state from which device will issue wakeup events + * @runtime: True if the events are to be generated at run time * @enable: True to enable event generation; false to disable * * This enables the device as a wakeup event source, or disables it. @@ -1320,11 +1321,12 @@ void pci_pme_active(struct pci_dev *dev, bool enable) * Error code depending on the platform is returned if both the platform and * the native mechanism fail to enable the generation of wake-up events */ -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) +int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool runtime, bool enable) { int ret = 0; - if (enable && !device_may_wakeup(&dev->dev)) + if (enable && !runtime && !device_may_wakeup(&dev->dev)) return -EINVAL; /* Don't do the same thing twice in a row for one device. */ @@ -1344,19 +1346,24 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) pci_pme_active(dev, true); else ret = 1; - error = platform_pci_sleep_wake(dev, true); + error = runtime ? platform_pci_run_wake(dev, true) : + platform_pci_sleep_wake(dev, true); if (ret) ret = error; if (!ret) dev->wakeup_prepared = true; } else { - platform_pci_sleep_wake(dev, false); + if (runtime) + platform_pci_run_wake(dev, false); + else + platform_pci_sleep_wake(dev, false); pci_pme_active(dev, false); dev->wakeup_prepared = false; } return ret; } +EXPORT_SYMBOL(__pci_enable_wake); /** * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold @@ -1465,6 +1472,31 @@ int pci_back_from_sleep(struct pci_dev *dev) return pci_set_power_state(dev, PCI_D0); } +/** + * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend. + * @dev: PCI device being suspended. + * + * Prepare @dev to generate wake-up events at run time and put it into a low + * power state. + */ +int pci_finish_runtime_suspend(struct pci_dev *dev) +{ + pci_power_t target_state = pci_target_state(dev); + int error; + + if (target_state == PCI_POWER_ERROR) + return -EIO; + + __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev)); + + error = pci_set_power_state(dev, target_state); + + if (error) + __pci_enable_wake(dev, target_state, true, false); + + return error; +} + /** * pci_dev_run_wake - Check if device can generate run-time wake-up events. * @dev: Device to check. @@ -2978,7 +3010,6 @@ EXPORT_SYMBOL(pci_save_state); EXPORT_SYMBOL(pci_restore_state); EXPORT_SYMBOL(pci_pme_capable); EXPORT_SYMBOL(pci_pme_active); -EXPORT_SYMBOL(pci_enable_wake); EXPORT_SYMBOL(pci_wake_from_d3); EXPORT_SYMBOL(pci_target_state); EXPORT_SYMBOL(pci_prepare_to_sleep); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 286c50821949..4eb10f48d270 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -55,6 +55,7 @@ extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state); extern void pci_disable_enabled_device(struct pci_dev *dev); extern bool pci_check_pme_status(struct pci_dev *dev); +extern int pci_finish_runtime_suspend(struct pci_dev *dev); extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign); extern void pci_pme_wakeup_bus(struct pci_bus *bus); extern void pci_pm_init(struct pci_dev *dev); diff --git a/include/linux/pci.h b/include/linux/pci.h index 3f787ce78bd1..1a29f9f6b2dc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -777,13 +777,20 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); bool pci_pme_capable(struct pci_dev *dev, pci_power_t state); void pci_pme_active(struct pci_dev *dev, bool enable); -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable); +int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool runtime, bool enable); int pci_wake_from_d3(struct pci_dev *dev, bool enable); pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); bool pci_dev_run_wake(struct pci_dev *dev); +static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool enable) +{ + return __pci_enable_wake(dev, state, false, enable); +} + /* For use by arch with custom probe code */ void set_pcie_port_type(struct pci_dev *pdev); void set_pcie_hotplug_bridge(struct pci_dev *pdev); diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 91e09d3b2eb2..4c9cffcf69c7 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -222,3 +222,8 @@ config PM_RUNTIME and the bus type drivers of the buses the devices are on are responsible for the actual handling of the autosuspend requests and wake-up events. + +config PM_OPS + bool + depends on PM_SLEEP || PM_RUNTIME + default y -- cgit v1.2.3 From b16694f70c40ea8d539cdc93a422039771e85870 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 22 Feb 2010 14:13:39 +0900 Subject: PCIe PME: use pci_pcie_cap() Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset. This reduces redundant search in PCI configuration space. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pcie/pme/pcie_pme.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c index 6b516309c094..7b3cbff547ee 100644 --- a/drivers/pci/pcie/pme/pcie_pme.c +++ b/drivers/pci/pcie/pme/pcie_pme.c @@ -105,7 +105,7 @@ static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) int rtctl_pos; u16 rtctl; - rtctl_pos = pci_find_capability(dev, PCI_CAP_ID_EXP) + PCI_EXP_RTCTL; + rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL; pci_read_config_word(dev, rtctl_pos, &rtctl); if (enable) @@ -124,7 +124,7 @@ static void pcie_pme_clear_status(struct pci_dev *dev) int rtsta_pos; u32 rtsta; - rtsta_pos = pci_find_capability(dev, PCI_CAP_ID_EXP) + PCI_EXP_RTSTA; + rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; pci_read_config_dword(dev, rtsta_pos, &rtsta); rtsta |= PCI_EXP_RTSTA_PME; @@ -278,7 +278,7 @@ static void pcie_pme_work_fn(struct work_struct *work) int rtsta_pos; u32 rtsta; - rtsta_pos = pci_find_capability(port, PCI_CAP_ID_EXP) + PCI_EXP_RTSTA; + rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; spin_lock_irq(&data->lock); @@ -332,7 +332,7 @@ static irqreturn_t pcie_pme_irq(int irq, void *context) port = ((struct pcie_device *)context)->port; data = get_service_data((struct pcie_device *)context); - rtsta_pos = pci_find_capability(port, PCI_CAP_ID_EXP) + PCI_EXP_RTSTA; + rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; spin_lock_irqsave(&data->lock, flags); pci_read_config_dword(port, rtsta_pos, &rtsta); -- cgit v1.2.3 From fa27b2d108fa49685129867a8c5b968344d6e197 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Feb 2010 10:24:21 -0700 Subject: PCI: split up pci_read_bridge_bases() No functional change; this breaks up pci_read_bridge_bases() into separate pieces for the I/O, memory, and prefetchable memory windows, similar to how Yinghai recently split up pci_setup_bridge() in 68e84ff3bdc. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 54 ++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 39 insertions(+), 15 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index d3009430eab6..4b47b4bfb066 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -281,26 +281,12 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) } } -void __devinit pci_read_bridge_bases(struct pci_bus *child) +static void __devinit pci_read_bridge_io(struct pci_bus *child) { struct pci_dev *dev = child->self; u8 io_base_lo, io_limit_lo; - u16 mem_base_lo, mem_limit_lo; unsigned long base, limit; struct resource *res; - int i; - - if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ - return; - - dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n", - child->secondary, child->subordinate, - dev->transparent ? " (subtractive decode)": ""); - - if (dev->transparent) { - for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) - child->resource[i] = child->parent->resource[i - 3]; - } res = child->resource[0]; pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); @@ -328,6 +314,14 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) " bridge window [io %04lx - %04lx] reg reading\n", base, limit); } +} + +static void __devinit pci_read_bridge_mmio(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + u16 mem_base_lo, mem_limit_lo; + unsigned long base, limit; + struct resource *res; res = child->resource[1]; pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo); @@ -344,6 +338,14 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n", base, limit + 0xfffff); } +} + +static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + u16 mem_base_lo, mem_limit_lo; + unsigned long base, limit; + struct resource *res; res = child->resource[2]; pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo); @@ -389,6 +391,28 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) } } +void __devinit pci_read_bridge_bases(struct pci_bus *child) +{ + struct pci_dev *dev = child->self; + int i; + + if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ + return; + + dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n", + child->secondary, child->subordinate, + dev->transparent ? " (subtractive decode)" : ""); + + if (dev->transparent) { + for (i = 3; i < PCI_BUS_NUM_RESOURCES; i++) + child->resource[i] = child->parent->resource[i - 3]; + } + + pci_read_bridge_io(child); + pci_read_bridge_mmio(child); + pci_read_bridge_mmio_pref(child); +} + static struct pci_bus * pci_alloc_bus(void) { struct pci_bus *b; -- cgit v1.2.3 From 2adf75160b10bf3f09ed7d3d04e937f923fc557e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Feb 2010 10:24:26 -0700 Subject: PCI: read bridge windows before filling in subtractive decode resources No functional change; this fills in the bus subtractive decode resources after reading the bridge window information rather than before. Also, print out the subtractive decode resources as we already do for the positive decode windows. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 4b47b4bfb066..70c4ed2e67cc 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -403,14 +403,19 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) child->secondary, child->subordinate, dev->transparent ? " (subtractive decode)" : ""); - if (dev->transparent) { - for (i = 3; i < PCI_BUS_NUM_RESOURCES; i++) - child->resource[i] = child->parent->resource[i - 3]; - } - pci_read_bridge_io(child); pci_read_bridge_mmio(child); pci_read_bridge_mmio_pref(child); + + if (dev->transparent) { + for (i = 3; i < PCI_BUS_NUM_RESOURCES; i++) { + child->resource[i] = child->parent->resource[i - 3]; + if (child->resource[i]) + dev_printk(KERN_DEBUG, &dev->dev, + " bridge window %pR (subtractive decode)\n", + child->resource[i]); + } + } } static struct pci_bus * pci_alloc_bus(void) -- cgit v1.2.3 From 89a74ecccd1f78e51faf6287e5c0e93a92ac096e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Feb 2010 10:24:31 -0700 Subject: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- arch/ia64/pci/pci.c | 5 ++--- arch/mn10300/unit-asb2305/pci.c | 6 ++---- arch/powerpc/kernel/pci-common.c | 11 ++++------- arch/powerpc/platforms/fsl_uli1575.c | 12 ++++++------ drivers/pci/bus.c | 4 ++-- drivers/pci/hotplug/shpchp_sysfs.c | 9 +++------ drivers/pci/pci.c | 5 ++--- drivers/pci/setup-bus.c | 10 ++++------ drivers/pcmcia/rsrc_nonstatic.c | 3 +-- drivers/pcmcia/yenta_socket.c | 5 +++-- include/linux/pci.h | 3 +++ 11 files changed, 32 insertions(+), 41 deletions(-) (limited to 'drivers/pci') diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 783c83bb2b49..89f957ca3eb2 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -452,13 +452,12 @@ EXPORT_SYMBOL(pcibios_bus_to_resource); static int __devinit is_valid_resource(struct pci_dev *dev, int idx) { unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM; - struct resource *devr = &dev->resource[idx]; + struct resource *devr = &dev->resource[idx], *busr; if (!dev->bus) return 0; - for (i=0; ibus->resource[i]; + pci_bus_for_each_resource(dev->bus, busr, i) { if (!busr || ((busr->flags ^ devr->flags) & type_mask)) continue; if ((devr->start) && (devr->start >= busr->start) && diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 2cb7e75ba1c0..6d8720a0a599 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -331,12 +331,10 @@ static int __init pci_check_direct(void) static int __devinit is_valid_resource(struct pci_dev *dev, int idx) { unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM; - struct resource *devr = &dev->resource[idx]; + struct resource *devr = &dev->resource[idx], *busr; if (dev->bus) { - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *busr = dev->bus->resource[i]; - + pci_bus_for_each_resource(dev->bus, busr, i) { if (!busr || (busr->flags ^ devr->flags) & type_mask) continue; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index e640810e813f..2597f9545d8a 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1047,10 +1047,8 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) struct pci_dev *dev = bus->self; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { - if ((res = bus->resource[i]) == NULL) - continue; - if (!res->flags) + pci_bus_for_each_resource(bus, res, i) { + if (!res || !res->flags) continue; if (i >= 3 && bus->self->transparent) continue; @@ -1277,9 +1275,8 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) pr_debug("PCI: Allocating bus resources for %04x:%02x...\n", pci_domain_nr(bus), bus->number); - for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { - if ((res = bus->resource[i]) == NULL || !res->flags - || res->start > res->end || res->parent) + pci_bus_for_each_resource(bus, res, i) { + if (!res || !res->flags || res->start > res->end || res->parent) continue; if (bus->parent == NULL) pr = (res->flags & IORESOURCE_IO) ? diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index fd23a1d4b39d..8b0c2082a783 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -222,6 +222,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev) int i; u8 *dummy; struct pci_bus *bus = dev->bus; + struct resource *res; resource_size_t end = 0; for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) { @@ -230,13 +231,12 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev) end = pci_resource_end(dev, i); } - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - if ((bus->resource[i]) && - (bus->resource[i]->flags & IORESOURCE_MEM)) { - if (bus->resource[i]->end == end) - dummy = ioremap(bus->resource[i]->start, 0x4); + pci_bus_for_each_resource(bus, res, i) { + if (res && res->flags & IORESOURCE_MEM) { + if (res->end == end) + dummy = ioremap(res->start, 0x4); else - dummy = ioremap(bus->resource[i]->end - 3, 0x4); + dummy = ioremap(res->end - 3, 0x4); if (dummy) { in_8(dummy); iounmap(dummy); diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index a26135bb0ffd..e75d219fd107 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -43,6 +43,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, void *alignf_data) { int i, ret = -ENOMEM; + struct resource *r; resource_size_t max = -1; type_mask |= IORESOURCE_IO | IORESOURCE_MEM; @@ -51,8 +52,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, if (!(res->flags & IORESOURCE_MEM_64)) max = PCIBIOS_MAX_MEM_32; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (!r) continue; diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index 29fa9d26adae..071b7dc0094b 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -47,8 +47,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha bus = pdev->subordinate; out += sprintf(buf, "Free resources: memory\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_MEM) && !(res->flags & IORESOURCE_PREFETCH)) { out += sprintf(out, "start = %8.8llx, " @@ -58,8 +57,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha } } out += sprintf(out, "Free resources: prefetchable memory\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_MEM) && (res->flags & IORESOURCE_PREFETCH)) { out += sprintf(out, "start = %8.8llx, " @@ -69,8 +67,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha } } out += sprintf(out, "Free resources: IO\n"); - for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { - res = bus->resource[index]; + pci_bus_for_each_resource(bus, res, index) { if (res && (res->flags & IORESOURCE_IO)) { out += sprintf(out, "start = %8.8llx, " "length = %8.8llx\n", diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d62a5de81672..f4a2738bf0bf 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -386,10 +386,9 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) { const struct pci_bus *bus = dev->bus; int i; - struct resource *best = NULL; + struct resource *best = NULL, *r; - for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (!r) continue; if (res->start && !(res->start >= r->start && res->end <= r->end)) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 743ed8c48b9c..bf32f07c4efb 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -387,8 +387,7 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (r == &ioport_resource || r == &iomem_resource) continue; if (r && (r->flags & type_mask) == type && !r->parent) @@ -803,11 +802,10 @@ static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus, static void pci_bus_dump_res(struct pci_bus *bus) { - int i; - - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *res = bus->resource[i]; + struct resource *res; + int i; + pci_bus_for_each_resource(bus, res, i) { if (!res || !res->end || !res->flags) continue; diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 45d75dc452f0..c67638fe6914 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -803,8 +803,7 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s) return -EINVAL; #endif - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - res = s->cb_dev->bus->resource[i]; + pci_bus_for_each_resource(s->cb_dev->bus, res, i) { if (!res) continue; diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index e4d12acdd525..1f2039d5e966 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -649,9 +649,10 @@ static int yenta_search_one_res(struct resource *root, struct resource *res, static int yenta_search_res(struct yenta_socket *socket, struct resource *res, u32 min) { + struct resource *root; int i; - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *root = socket->dev->bus->resource[i]; + + pci_bus_for_each_resource(socket->dev->bus, root, i) { if (!root) continue; diff --git a/include/linux/pci.h b/include/linux/pci.h index 1a29f9f6b2dc..2ff9d26a078f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -829,6 +829,9 @@ int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *); void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ +#define pci_bus_for_each_resource(bus, res, i) \ + for (i = 0; res = bus->resource[i], i < PCI_BUS_NUM_RESOURCES; i++) + int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, -- cgit v1.2.3 From 2fe2abf896c1e7a0ee65faaf3ef0ce654848abbd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Feb 2010 10:24:36 -0700 Subject: PCI: augment bus resource table with a list Previously we used a table of size PCI_BUS_NUM_RESOURCES (16) for resources forwarded to a bus by its upstream bridge. We've increased this size several times when the table overflowed. But there's no good limit on the number of resources because host bridges and subtractive decode bridges can forward any number of ranges to their secondary buses. This patch reduces the table to only PCI_BRIDGE_RESOURCE_NUM (4) entries, which corresponds to the number of windows a PCI-to-PCI (3) or CardBus (4) bridge can positively decode. Any additional resources, e.g., PCI host bridge windows or subtractively-decoded regions, are kept in a list. I'd prefer a single list rather than this split table/list approach, but that requires simultaneous changes to every architecture. This approach only requires immediate changes where we set up (a) host bridges with more than four windows and (b) subtractive-decode P2P bridges, and we can incrementally change other architectures to use the list. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- arch/ia64/pci/pci.c | 12 +++--------- arch/x86/pci/acpi.c | 33 ++++----------------------------- arch/x86/pci/bus_numa.c | 3 ++- arch/x86/pci/bus_numa.h | 3 +-- drivers/pci/bus.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/probe.c | 17 +++++++++++++---- include/linux/pci.h | 35 +++++++++++++++++++++++++++++------ 7 files changed, 98 insertions(+), 51 deletions(-) (limited to 'drivers/pci') diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 89f957ca3eb2..64aff520b899 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -320,9 +320,9 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) static void __devinit pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) { - int i, j; + int i; - j = 0; + pci_bus_remove_resources(bus); for (i = 0; i < ctrl->windows; i++) { struct resource *res = &ctrl->window[i].resource; /* HP's firmware has a hack to work around a Windows bug. @@ -330,13 +330,7 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) if ((res->flags & IORESOURCE_MEM) && (res->end - res->start < 16)) continue; - if (j >= PCI_BUS_NUM_RESOURCES) { - dev_warn(&bus->dev, - "ignoring host bridge window %pR (no space)\n", - res); - continue; - } - bus->resource[j++] = res; + pci_bus_add_resource(bus, res, 0); } } diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 959e548a7039..a2f8cdb8c1d5 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -45,20 +45,6 @@ count_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; } -static int -bus_has_transparent_bridge(struct pci_bus *bus) -{ - struct pci_dev *dev; - - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 class = dev->class >> 8; - - if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) - return true; - } - return false; -} - static void align_resource(struct acpi_device *bridge, struct resource *res) { @@ -92,12 +78,8 @@ setup_resource(struct acpi_resource *acpi_res, void *data) acpi_status status; unsigned long flags; struct resource *root; - int max_root_bus_resources = PCI_BUS_NUM_RESOURCES; u64 start, end; - if (bus_has_transparent_bridge(info->bus)) - max_root_bus_resources -= 3; - status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) return AE_OK; @@ -115,15 +97,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data) start = addr.minimum + addr.translation_offset; end = start + addr.address_length - 1; - if (info->res_num >= max_root_bus_resources) { - if (pci_probe & PCI_USE__CRS) - printk(KERN_WARNING "PCI: Failed to allocate " - "0x%lx-0x%lx from %s for %s due to _CRS " - "returning more than %d resource descriptors\n", - (unsigned long) start, (unsigned long) end, - root->name, info->name, max_root_bus_resources); - return AE_OK; - } res = &info->res[info->res_num]; res->name = info->name; @@ -143,7 +116,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data) dev_err(&info->bridge->dev, "can't allocate host bridge window %pR\n", res); } else { - info->bus->resource[info->res_num] = res; + pci_bus_add_resource(info->bus, res, 0); info->res_num++; if (addr.translation_offset) dev_info(&info->bridge->dev, "host bridge window %pR " @@ -164,7 +137,9 @@ get_current_resources(struct acpi_device *device, int busnum, struct pci_root_info info; size_t size; - if (!(pci_probe & PCI_USE__CRS)) + if (pci_probe & PCI_USE__CRS) + pci_bus_remove_resources(bus); + else dev_info(&device->dev, "ignoring host bridge windows from ACPI; " "boot with \"pci=use_crs\" to use them\n"); diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c index f939d603adfa..12d54ff3654d 100644 --- a/arch/x86/pci/bus_numa.c +++ b/arch/x86/pci/bus_numa.c @@ -36,13 +36,14 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", b->number); + pci_bus_remove_resources(b); info = &pci_root_info[i]; for (j = 0; j < info->res_num; j++) { struct resource *res; struct resource *root; res = &info->res[j]; - b->resource[j] = res; + pci_bus_add_resource(b, res, 0); if (res->flags & IORESOURCE_IO) root = &ioport_resource; else diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h index adbc23fe82ac..731b64ee8d84 100644 --- a/arch/x86/pci/bus_numa.h +++ b/arch/x86/pci/bus_numa.h @@ -2,8 +2,7 @@ /* * sub bus (transparent) will use entres from 3 to store extra from - * root, so need to make sure we have enough slot there, Should we - * increase PCI_BUS_NUM_RESOURCES? + * root, so need to make sure we have enough slot there. */ #define RES_NUM 16 struct pci_root_info { diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index e75d219fd107..712250f5874a 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -17,6 +17,52 @@ #include "pci.h" +void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, + unsigned int flags) +{ + struct pci_bus_resource *bus_res; + + bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL); + if (!bus_res) { + dev_err(&bus->dev, "can't add %pR resource\n", res); + return; + } + + bus_res->res = res; + bus_res->flags = flags; + list_add_tail(&bus_res->list, &bus->resources); +} + +struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n) +{ + struct pci_bus_resource *bus_res; + + if (n < PCI_BRIDGE_RESOURCE_NUM) + return bus->resource[n]; + + n -= PCI_BRIDGE_RESOURCE_NUM; + list_for_each_entry(bus_res, &bus->resources, list) { + if (n-- == 0) + return bus_res->res; + } + return NULL; +} +EXPORT_SYMBOL_GPL(pci_bus_resource_n); + +void pci_bus_remove_resources(struct pci_bus *bus) +{ + struct pci_bus_resource *bus_res, *tmp; + int i; + + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) + bus->resource[i] = 0; + + list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) { + list_del(&bus_res->list); + kfree(bus_res); + } +} + /** * pci_bus_alloc_resource - allocate a resource from a parent bus * @bus: PCI bus diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 70c4ed2e67cc..270d069819f7 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -89,6 +89,7 @@ static void release_pcibus_dev(struct device *dev) if (pci_bus->bridge) put_device(pci_bus->bridge); + pci_bus_remove_resources(pci_bus); kfree(pci_bus); } @@ -394,6 +395,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) void __devinit pci_read_bridge_bases(struct pci_bus *child) { struct pci_dev *dev = child->self; + struct resource *res; int i; if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ @@ -403,17 +405,23 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) child->secondary, child->subordinate, dev->transparent ? " (subtractive decode)" : ""); + pci_bus_remove_resources(child); + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) + child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; + pci_read_bridge_io(child); pci_read_bridge_mmio(child); pci_read_bridge_mmio_pref(child); if (dev->transparent) { - for (i = 3; i < PCI_BUS_NUM_RESOURCES; i++) { - child->resource[i] = child->parent->resource[i - 3]; - if (child->resource[i]) + pci_bus_for_each_resource(child->parent, res, i) { + if (res) { + pci_bus_add_resource(child, res, + PCI_SUBTRACTIVE_DECODE); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR (subtractive decode)\n", - child->resource[i]); + res); + } } } } @@ -428,6 +436,7 @@ static struct pci_bus * pci_alloc_bus(void) INIT_LIST_HEAD(&b->children); INIT_LIST_HEAD(&b->devices); INIT_LIST_HEAD(&b->slots); + INIT_LIST_HEAD(&b->resources); b->max_bus_speed = PCI_SPEED_UNKNOWN; b->cur_bus_speed = PCI_SPEED_UNKNOWN; } diff --git a/include/linux/pci.h b/include/linux/pci.h index 2ff9d26a078f..e19a69613d8f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -364,9 +364,26 @@ static inline void pci_add_saved_cap(struct pci_dev *pci_dev, hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); } -#ifndef PCI_BUS_NUM_RESOURCES -#define PCI_BUS_NUM_RESOURCES 16 -#endif +/* + * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond + * to P2P or CardBus bridge windows) go in a table. Additional ones (for + * buses below host bridges or subtractive decode bridges) go in the list. + * Use pci_bus_for_each_resource() to iterate through all the resources. + */ + +/* + * PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly + * and there's no way to program the bridge with the details of the window. + * This does not apply to ACPI _CRS windows, even with the _DEC subtractive- + * decode bit set, because they are explicit and can be programmed with _SRS. + */ +#define PCI_SUBTRACTIVE_DECODE 0x1 + +struct pci_bus_resource { + struct list_head list; + struct resource *res; + unsigned int flags; +}; #define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ @@ -377,8 +394,8 @@ struct pci_bus { struct list_head devices; /* list of devices on this bus */ struct pci_dev *self; /* bridge device as seen by parent */ struct list_head slots; /* list of slots on this bus */ - struct resource *resource[PCI_BUS_NUM_RESOURCES]; - /* address space routed to this bus */ + struct resource *resource[PCI_BRIDGE_RESOURCE_NUM]; + struct list_head resources; /* address space routed to this bus */ struct pci_ops *ops; /* configuration access functions */ void *sysdata; /* hook for sys-specific extension */ @@ -829,8 +846,14 @@ int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *); void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ +void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags); +struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n); +void pci_bus_remove_resources(struct pci_bus *bus); + #define pci_bus_for_each_resource(bus, res, i) \ - for (i = 0; res = bus->resource[i], i < PCI_BUS_NUM_RESOURCES; i++) + for (i = 0; \ + (res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \ + i++) int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, -- cgit v1.2.3 From a1e4d72cd3024999bfb6703092ea271438805c89 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 8 Feb 2010 19:16:33 +0100 Subject: PM: Allow PCI devices to suspend/resume asynchronously Set power.async_suspend for all PCI devices and PCIe port services, so that they can be suspended and resumed in parallel with other devices they don't depend on in a known way (i.e. devices which are not their parents or children). This only affects the "regular" suspend and resume stages, which means in particular that the restoration of the PCI devices' standard configuration registers during resume will still be carried out synchronously (at the "early" resume stage). Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 1 + drivers/pci/pcie/portdrv_core.c | 1 + drivers/pci/probe.c | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f4a2738bf0bf..2b9ac9e594af 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1540,6 +1540,7 @@ void pci_pm_init(struct pci_dev *dev) int pm; u16 pmc; + device_enable_async_suspend(&dev->dev); dev->wakeup_prepared = false; dev->pm_cap = 0; diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 0d34ff415399..e73effbe402c 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -285,6 +285,7 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq) pci_name(pdev), get_descriptor_id(pdev->pcie_type, service)); device->parent = &pdev->dev; + device_enable_async_suspend(device); retval = device_register(device); if (retval) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 270d069819f7..2a943090a3b7 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1436,6 +1436,7 @@ struct pci_bus * pci_create_bus(struct device *parent, if (error) goto dev_reg_err; b->bridge = get_device(dev); + device_enable_async_suspend(b->bridge); if (!parent) set_dev_node(b->bridge, pcibus_to_node(b)); -- cgit v1.2.3 From b55ac1b22690d2e5b02a61cf6d69c2d66969c79d Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 26 Feb 2010 14:04:41 +0000 Subject: pci: Add helper to find a VPD resource data type This patch adds the pci_vpd_find_tag() helper function to find VPD resource data types in a buffer. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Acked-by: Jesse Barnes Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 24 ++++-------------------- drivers/net/tg3.c | 26 +++++--------------------- drivers/pci/Makefile | 2 +- drivers/pci/vpd.c | 43 +++++++++++++++++++++++++++++++++++++++++++ include/linux/pci.h | 12 ++++++++++++ 5 files changed, 65 insertions(+), 42 deletions(-) create mode 100644 drivers/pci/vpd.c (limited to 'drivers/pci') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 084ef102b8c4..fd43feb5a350 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7769,28 +7769,12 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp) } for (i = 0; i <= BNX2_VPD_LEN - 3; ) { - unsigned char val = data[i]; unsigned int block_end; - if (val & PCI_VPD_LRDT) { - if (i + PCI_VPD_LRDT_TAG_SIZE > BNX2_VPD_LEN) - break; - - if (val != PCI_VPD_LRDT_RO_DATA) { - i += PCI_VPD_LRDT_TAG_SIZE + - pci_vpd_lrdt_size(&data[i]); - - continue; - } - } else { - if ((val & PCI_VPD_SRDT_TIN_MASK) == PCI_VPD_STIN_END) - break; - - i += PCI_VPD_SRDT_TAG_SIZE + - pci_vpd_srdt_size(&data[i]); - - continue; - } + i = pci_vpd_find_tag(data, i, BNX2_VPD_LEN, + PCI_VPD_LRDT_RO_DATA); + if (i < 0) + break; block_end = (i + PCI_VPD_LRDT_TAG_SIZE + pci_vpd_lrdt_size(&data[i])); diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index ed57a62b3ac8..76ad141ab448 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -12547,7 +12547,7 @@ skip_phy_reset: static void __devinit tg3_read_partno(struct tg3 *tp) { unsigned char vpd_data[TG3_NVM_VPD_LEN]; /* in little-endian format */ - unsigned int i; + int i; u32 magic; if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) || @@ -12586,28 +12586,12 @@ static void __devinit tg3_read_partno(struct tg3 *tp) /* Now parse and find the part number. */ for (i = 0; i < TG3_NVM_VPD_LEN - 2; ) { - unsigned char val = vpd_data[i]; unsigned int block_end; - if (val & PCI_VPD_LRDT) { - if (i + PCI_VPD_LRDT_TAG_SIZE > TG3_NVM_VPD_LEN) - break; - - if (val != PCI_VPD_LRDT_RO_DATA) { - i += PCI_VPD_LRDT_TAG_SIZE + - pci_vpd_lrdt_size(&vpd_data[i]); - - continue; - } - } else { - if ((val & PCI_VPD_SRDT_TIN_MASK) == PCI_VPD_STIN_END) - break; - - i += PCI_VPD_SRDT_TAG_SIZE + - pci_vpd_srdt_size(&vpd_data[i]); - - continue; - } + i = pci_vpd_find_tag(vpd_data, i, TG3_NVM_VPD_LEN, + PCI_VPD_LRDT_RO_DATA); + if (i < 0) + break; block_end = i + PCI_VPD_LRDT_TAG_SIZE + pci_vpd_lrdt_size(&vpd_data[i]); diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 4df48d58eaa6..b2f6d777a084 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -4,7 +4,7 @@ obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \ pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ - irq.o + irq.o vpd.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_SYSFS) += slot.o diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c new file mode 100644 index 000000000000..6bc554576f8d --- /dev/null +++ b/drivers/pci/vpd.c @@ -0,0 +1,43 @@ +/* + * File: vpd.c + * Purpose: Provide PCI VPD support + * + * Copyright (C) 2010 Broadcom Corporation. + */ + +#include + +int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt) +{ + int i; + + for (i = off; i < len; ) { + u8 val = buf[i]; + + if (val & PCI_VPD_LRDT) { + /* Don't return success of the tag isn't complete */ + if (i + PCI_VPD_LRDT_TAG_SIZE > len) + break; + + if (val == rdt) + return i; + + i += PCI_VPD_LRDT_TAG_SIZE + + pci_vpd_lrdt_size(&buf[i]); + } else { + u8 tag = val & ~PCI_VPD_SRDT_LEN_MASK; + + if (tag == rdt) + return i; + + if (tag == PCI_VPD_SRDT_END) + break; + + i += PCI_VPD_SRDT_TAG_SIZE + + pci_vpd_srdt_size(&buf[i]); + } + } + + return -ENOENT; +} +EXPORT_SYMBOL_GPL(pci_vpd_find_tag); diff --git a/include/linux/pci.h b/include/linux/pci.h index 198d062640b7..e30ceea7345b 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1395,5 +1395,17 @@ static inline u8 pci_vpd_srdt_size(const u8 *srdt) return (*srdt) & PCI_VPD_SRDT_LEN_MASK; } +/** + * pci_vpd_find_tag - Locates the Resource Data Type tag provided + * @buf: Pointer to buffered vpd data + * @off: The offset into the buffer at which to begin the search + * @len: The length of the vpd buffer + * @rdt: The Resource Data Type to search for + * + * Returns the index where the Resource Data Type was found or + * -ENOENT otherwise. + */ +int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt); + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- cgit v1.2.3 From 4067a8541d397e9d6b443dd2ce0ecb78bfd991db Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 26 Feb 2010 14:04:43 +0000 Subject: pci: Add helper to search for VPD keywords This patch adds the pci_vpd_find_info_keyword() helper function to find information field keywords within read-only and read-write large resource data type sections. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Acked-by: Jesse Barnes Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 54 +++++++++++++++++++++++++++++------------------------ drivers/net/tg3.c | 32 +++++++++++++------------------ drivers/pci/vpd.c | 18 ++++++++++++++++++ include/linux/pci.h | 17 +++++++++++++++++ 4 files changed, 78 insertions(+), 43 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index b808707f83ff..bc23bfb687c3 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7769,48 +7769,54 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp) } for (i = 0; i <= BNX2_VPD_LEN - 3; ) { - unsigned int block_end; + int j; + unsigned int block_end, rosize; i = pci_vpd_find_tag(data, i, BNX2_VPD_LEN, PCI_VPD_LRDT_RO_DATA); if (i < 0) break; - block_end = (i + PCI_VPD_LRDT_TAG_SIZE + - pci_vpd_lrdt_size(&data[i])); + rosize = pci_vpd_lrdt_size(&data[i]); + block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize; i += PCI_VPD_LRDT_TAG_SIZE; if (block_end > BNX2_VPD_LEN) goto vpd_done; - while (i < (block_end - 2)) { - int len = pci_vpd_info_field_size(&data[i]); + j = pci_vpd_find_info_keyword(data, i, rosize, + PCI_VPD_RO_KEYWORD_MFR_ID); + if (j > 0) { + int len = pci_vpd_info_field_size(&data[j]); - if (i + PCI_VPD_INFO_FLD_HDR_SIZE + len > block_end) + if (j + PCI_VPD_INFO_FLD_HDR_SIZE + len > block_end || + len != 4 || + memcmp(&data[j + PCI_VPD_INFO_FLD_HDR_SIZE], + "1028", 4)) goto vpd_done; - if (data[i] == 'M' && data[i + 1] == 'N') { - if (len != 4 || - memcmp(&data[i + PCI_VPD_INFO_FLD_HDR_SIZE], - "1028", 4)) - goto vpd_done; - mn_match = true; + mn_match = true; + } - } else if (data[i] == 'V' && data[i + 1] == '0') { - if (len > BNX2_MAX_VER_SLEN) - goto vpd_done; + j = pci_vpd_find_info_keyword(data, i, rosize, + PCI_VPD_RO_KEYWORD_VENDOR0); + if (j > 0) { + int len = pci_vpd_info_field_size(&data[j]); - v0_len = len; - v0_str = &data[i + PCI_VPD_INFO_FLD_HDR_SIZE]; - } - i += PCI_VPD_INFO_FLD_HDR_SIZE + len; - - if (mn_match && v0_str) { - memcpy(bp->fw_version, v0_str, v0_len); - bp->fw_version[v0_len] = ' '; + j += PCI_VPD_INFO_FLD_HDR_SIZE; + if (j + len > block_end || len > BNX2_MAX_VER_SLEN) goto vpd_done; - } + + v0_len = len; + v0_str = &data[j]; } + + if (mn_match && v0_str) { + memcpy(bp->fw_version, v0_str, v0_len); + bp->fw_version[v0_len] = ' '; + goto vpd_done; + } + goto vpd_done; } diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f59f36910e98..204c565caa5a 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -12586,39 +12586,33 @@ static void __devinit tg3_read_partno(struct tg3 *tp) /* Now parse and find the part number. */ for (i = 0; i < TG3_NVM_VPD_LEN - 2; ) { - unsigned int block_end; + unsigned int block_end, rosize; i = pci_vpd_find_tag(vpd_data, i, TG3_NVM_VPD_LEN, PCI_VPD_LRDT_RO_DATA); if (i < 0) break; - block_end = i + PCI_VPD_LRDT_TAG_SIZE + - pci_vpd_lrdt_size(&vpd_data[i]); - + rosize = pci_vpd_lrdt_size(&vpd_data[i]); + block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize; i += PCI_VPD_LRDT_TAG_SIZE; if (block_end > TG3_NVM_VPD_LEN) goto out_not_found; - while (i < (block_end - 2)) { - if (vpd_data[i + 0] == 'P' && - vpd_data[i + 1] == 'N') { - int partno_len = pci_vpd_info_field_size(&vpd_data[i]); + i = pci_vpd_find_info_keyword(vpd_data, i, rosize, + PCI_VPD_RO_KEYWORD_PARTNO); + if (i > 0) { + u8 len = pci_vpd_info_field_size(&vpd_data[i]); - i += PCI_VPD_INFO_FLD_HDR_SIZE; - if (partno_len > TG3_BPN_SIZE || - (partno_len + i) > TG3_NVM_VPD_LEN) - goto out_not_found; + i += PCI_VPD_INFO_FLD_HDR_SIZE; + if (len > TG3_BPN_SIZE || + (len + i) > TG3_NVM_VPD_LEN) + break; - memcpy(tp->board_part_number, - &vpd_data[i], partno_len); + memcpy(tp->board_part_number, &vpd_data[i], len); - /* Success. */ - return; - } - i += PCI_VPD_INFO_FLD_HDR_SIZE + - pci_vpd_info_field_size(&vpd_data[i]); + return; } /* Part number not found. */ diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c index 6bc554576f8d..a5a5ca17cfe6 100644 --- a/drivers/pci/vpd.c +++ b/drivers/pci/vpd.c @@ -41,3 +41,21 @@ int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt) return -ENOENT; } EXPORT_SYMBOL_GPL(pci_vpd_find_tag); + +int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off, + unsigned int len, const char *kw) +{ + int i; + + for (i = off; i + PCI_VPD_INFO_FLD_HDR_SIZE <= off + len;) { + if (buf[i + 0] == kw[0] && + buf[i + 1] == kw[1]) + return i; + + i += PCI_VPD_INFO_FLD_HDR_SIZE + + pci_vpd_info_field_size(&buf[i]); + } + + return -ENOENT; +} +EXPORT_SYMBOL_GPL(pci_vpd_find_info_keyword); diff --git a/include/linux/pci.h b/include/linux/pci.h index cfff32fc6e35..1f4a52131c99 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1375,6 +1375,10 @@ void pci_request_acs(void); #define PCI_VPD_INFO_FLD_HDR_SIZE 3 +#define PCI_VPD_RO_KEYWORD_PARTNO "PN" +#define PCI_VPD_RO_KEYWORD_MFR_ID "MN" +#define PCI_VPD_RO_KEYWORD_VENDOR0 "V0" + /** * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length * @lrdt: Pointer to the beginning of the Large Resource Data Type tag @@ -1420,5 +1424,18 @@ static inline u8 pci_vpd_info_field_size(const u8 *info_field) */ int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt); +/** + * pci_vpd_find_info_keyword - Locates an information field keyword in the VPD + * @buf: Pointer to buffered vpd data + * @off: The offset into the buffer at which to begin the search + * @len: The length of the buffer area, relative to off, in which to search + * @kw: The keyword to search for + * + * Returns the index where the information field keyword was found or + * -ENOENT otherwise. + */ +int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off, + unsigned int len, const char *kw); + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- cgit v1.2.3 From 9a928660c9dcaff568c9d379655c5aa16fb981f8 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 28 Feb 2010 15:49:39 -0800 Subject: pci: don't reassign to ROM res if it is not going to be enabled A ROM resource that doesn't fit should not cause us to try to re-assign all the bus resources. Nobody generally cares, and re-assigning is going to just cause way more troubles than it tries to solve. Signed-off-by: Yinghai Lu Signed-off-by: Linus Torvalds --- drivers/pci/setup-bus.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index bf32f07c4efb..4fe36d2e1049 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -101,9 +101,17 @@ static void __assign_resources_sorted(struct resource_list *head, for (list = head->next; list;) { res = list->res; idx = res - &list->dev->resource[0]; + if (pci_assign_resource(list->dev, idx)) { - if (fail_head && !pci_is_root_bus(list->dev->bus)) - add_to_failed_list(fail_head, list->dev, res); + if (fail_head && !pci_is_root_bus(list->dev->bus)) { + /* + * if the failed res is for ROM BAR, and it will + * be enabled later, don't add it to the list + */ + if (!((idx == PCI_ROM_RESOURCE) && + (!(res->flags & IORESOURCE_ROM_ENABLE)))) + add_to_failed_list(fail_head, list->dev, res); + } res->start = 0; res->end = 0; res->flags = 0; -- cgit v1.2.3 From bb910a7040e90a0ca3d3e8245d6d5c128a5d1287 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 27 Feb 2010 21:37:37 +0100 Subject: PCI/PM Runtime: Make runtime PM of PCI devices inactive by default Make the run-time power management of PCI devices be inactive by default by calling pm_runtime_forbid() for each PCI device during its initialization. This setting may be overriden by the user space with the help of the /sys/devices/.../power/control interface. That's necessary to avoid breakage on systems where ACPI-based wake-up is known to fail for some devices. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5b548aee9cbc..6e100ae7f5b5 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1540,8 +1540,10 @@ void pci_pm_init(struct pci_dev *dev) int pm; u16 pmc; + pm_runtime_forbid(&dev->dev); device_enable_async_suspend(&dev->dev); dev->wakeup_prepared = false; + dev->pm_cap = 0; /* find PCI PM capability in list */ -- cgit v1.2.3 From 03cd8f7ebe0cbef5ca7eed349774085e92a3d726 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Fri, 5 Mar 2010 13:43:20 -0800 Subject: ricoh_mmc: port from driver to pci quirk This patch solves nasty problem original driver has. Original goal of the ricoh_mmc was to disable this device because then, mmc cards can be read using standard SDHCI controller, thus avoiding writing of yet another driver. However, the act of disablement, makes other pci functions that belong to this controller (xD and memstick) shift up one level, thus pci core has now wrong idea about these devices. To fix this issue, this patch moves the driver into the pci quirk section, thus it is executes before the pci is enumerated, and therefore solving that issue, also same sequence of commands is performed on resume for same reasons. Also regardless of the above, this way is cleaner. You still need to set CONFIG_MMC_RICOH_MMC to enable this quirk Signed-off-by: Maxim Levitsky Acked-by: Philip Langdale Acked-by: Wolfram Sang Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/Kconfig | 10 +- drivers/mmc/host/Makefile | 1 - drivers/mmc/host/ricoh_mmc.c | 262 ------------------------------------------- drivers/pci/quirks.c | 85 ++++++++++++++ 4 files changed, 88 insertions(+), 270 deletions(-) delete mode 100644 drivers/mmc/host/ricoh_mmc.c (limited to 'drivers/pci') diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index ce1d28884e29..6bc3ecb1f247 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -69,20 +69,16 @@ config MMC_SDHCI_PCI If unsure, say N. config MMC_RICOH_MMC - tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)" + bool "Ricoh MMC Controller Disabler (EXPERIMENTAL)" depends on MMC_SDHCI_PCI help - This selects the disabler for the Ricoh MMC Controller. This + This adds a pci quirk to disable Ricoh MMC Controller. This proprietary controller is unnecessary because the SDHCI driver supports MMC cards on the SD controller, but if it is not disabled, it will steal the MMC cards away - rendering them - useless. It is safe to select this driver even if you don't + useless. It is safe to select this even if you don't have a Ricoh based card reader. - - To compile this driver as a module, choose M here: - the module will be called ricoh_mmc. - If unsure, say Y. config MMC_SDHCI_OF diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 3d253dd4240f..f4803977dfce 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MMC_IMX) += imxmmc.o obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o -obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_WBSD) += wbsd.o diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c deleted file mode 100644 index f62790513322..000000000000 --- a/drivers/mmc/host/ricoh_mmc.c +++ /dev/null @@ -1,262 +0,0 @@ -/* - * ricoh_mmc.c - Dummy driver to disable the Rioch MMC controller. - * - * Copyright (C) 2007 Philip Langdale, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -/* - * This is a conceptually ridiculous driver, but it is required by the way - * the Ricoh multi-function chips (R5CXXX) work. These chips implement - * the four main memory card controllers (SD, MMC, MS, xD) and one or both - * of cardbus or firewire. It happens that they implement SD and MMC - * support as separate controllers (and PCI functions). The linux SDHCI - * driver supports MMC cards but the chip detects MMC cards in hardware - * and directs them to the MMC controller - so the SDHCI driver never sees - * them. To get around this, we must disable the useless MMC controller. - * At that point, the SDHCI controller will start seeing them. As a bonus, - * a detection event occurs immediately, even if the MMC card is already - * in the reader. - * - * It seems to be the case that the relevant PCI registers to deactivate the - * MMC controller live on PCI function 0, which might be the cardbus controller - * or the firewire controller, depending on the particular chip in question. As - * such, it makes what this driver has to do unavoidably ugly. Such is life. - */ - -#include - -#define DRIVER_NAME "ricoh-mmc" - -static const struct pci_device_id pci_ids[] __devinitdata = { - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C843, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - }, - { /* end: all zeroes */ }, -}; - -MODULE_DEVICE_TABLE(pci, pci_ids); - -static int ricoh_mmc_disable(struct pci_dev *fw_dev) -{ - u8 write_enable; - u8 write_target; - u8 disable; - - if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) { - /* via RL5C476 */ - - pci_read_config_byte(fw_dev, 0xB7, &disable); - if (disable & 0x02) { - printk(KERN_INFO DRIVER_NAME - ": Controller already disabled. " \ - "Nothing to do.\n"); - return -ENODEV; - } - - pci_read_config_byte(fw_dev, 0x8E, &write_enable); - pci_write_config_byte(fw_dev, 0x8E, 0xAA); - pci_read_config_byte(fw_dev, 0x8D, &write_target); - pci_write_config_byte(fw_dev, 0x8D, 0xB7); - pci_write_config_byte(fw_dev, 0xB7, disable | 0x02); - pci_write_config_byte(fw_dev, 0x8E, write_enable); - pci_write_config_byte(fw_dev, 0x8D, write_target); - } else { - /* via R5C832 */ - - pci_read_config_byte(fw_dev, 0xCB, &disable); - if (disable & 0x02) { - printk(KERN_INFO DRIVER_NAME - ": Controller already disabled. " \ - "Nothing to do.\n"); - return -ENODEV; - } - - pci_read_config_byte(fw_dev, 0xCA, &write_enable); - pci_write_config_byte(fw_dev, 0xCA, 0x57); - pci_write_config_byte(fw_dev, 0xCB, disable | 0x02); - pci_write_config_byte(fw_dev, 0xCA, write_enable); - } - - printk(KERN_INFO DRIVER_NAME - ": Controller is now disabled.\n"); - - return 0; -} - -static int ricoh_mmc_enable(struct pci_dev *fw_dev) -{ - u8 write_enable; - u8 write_target; - u8 disable; - - if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) { - /* via RL5C476 */ - - pci_read_config_byte(fw_dev, 0x8E, &write_enable); - pci_write_config_byte(fw_dev, 0x8E, 0xAA); - pci_read_config_byte(fw_dev, 0x8D, &write_target); - pci_write_config_byte(fw_dev, 0x8D, 0xB7); - pci_read_config_byte(fw_dev, 0xB7, &disable); - pci_write_config_byte(fw_dev, 0xB7, disable & ~0x02); - pci_write_config_byte(fw_dev, 0x8E, write_enable); - pci_write_config_byte(fw_dev, 0x8D, write_target); - } else { - /* via R5C832 */ - - pci_read_config_byte(fw_dev, 0xCA, &write_enable); - pci_read_config_byte(fw_dev, 0xCB, &disable); - pci_write_config_byte(fw_dev, 0xCA, 0x57); - pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02); - pci_write_config_byte(fw_dev, 0xCA, write_enable); - } - - printk(KERN_INFO DRIVER_NAME - ": Controller is now re-enabled.\n"); - - return 0; -} - -static int __devinit ricoh_mmc_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - u8 rev; - u8 ctrlfound = 0; - - struct pci_dev *fw_dev = NULL; - - BUG_ON(pdev == NULL); - BUG_ON(ent == NULL); - - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); - - printk(KERN_INFO DRIVER_NAME - ": Ricoh MMC controller found at %s [%04x:%04x] (rev %x)\n", - pci_name(pdev), (int)pdev->vendor, (int)pdev->device, - (int)rev); - - while ((fw_dev = - pci_get_device(PCI_VENDOR_ID_RICOH, - PCI_DEVICE_ID_RICOH_RL5C476, fw_dev))) { - if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) && - PCI_FUNC(fw_dev->devfn) == 0 && - pdev->bus == fw_dev->bus) { - if (ricoh_mmc_disable(fw_dev) != 0) - return -ENODEV; - - pci_set_drvdata(pdev, fw_dev); - - ++ctrlfound; - break; - } - } - - fw_dev = NULL; - - while (!ctrlfound && - (fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH, - PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) { - if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) && - PCI_FUNC(fw_dev->devfn) == 0 && - pdev->bus == fw_dev->bus) { - if (ricoh_mmc_disable(fw_dev) != 0) - return -ENODEV; - - pci_set_drvdata(pdev, fw_dev); - - ++ctrlfound; - } - } - - if (!ctrlfound) { - printk(KERN_WARNING DRIVER_NAME - ": Main Ricoh function not found. Cannot disable controller.\n"); - return -ENODEV; - } - - return 0; -} - -static void __devexit ricoh_mmc_remove(struct pci_dev *pdev) -{ - struct pci_dev *fw_dev = NULL; - - fw_dev = pci_get_drvdata(pdev); - BUG_ON(fw_dev == NULL); - - ricoh_mmc_enable(fw_dev); - - pci_set_drvdata(pdev, NULL); -} - -static int ricoh_mmc_suspend_late(struct pci_dev *pdev, pm_message_t state) -{ - struct pci_dev *fw_dev = NULL; - - fw_dev = pci_get_drvdata(pdev); - BUG_ON(fw_dev == NULL); - - printk(KERN_INFO DRIVER_NAME ": Suspending.\n"); - - ricoh_mmc_enable(fw_dev); - - return 0; -} - -static int ricoh_mmc_resume_early(struct pci_dev *pdev) -{ - struct pci_dev *fw_dev = NULL; - - fw_dev = pci_get_drvdata(pdev); - BUG_ON(fw_dev == NULL); - - printk(KERN_INFO DRIVER_NAME ": Resuming.\n"); - - ricoh_mmc_disable(fw_dev); - - return 0; -} - -static struct pci_driver ricoh_mmc_driver = { - .name = DRIVER_NAME, - .id_table = pci_ids, - .probe = ricoh_mmc_probe, - .remove = __devexit_p(ricoh_mmc_remove), - .suspend_late = ricoh_mmc_suspend_late, - .resume_early = ricoh_mmc_resume_early, -}; - -/*****************************************************************************\ - * * - * Driver init/exit * - * * -\*****************************************************************************/ - -static int __init ricoh_mmc_drv_init(void) -{ - printk(KERN_INFO DRIVER_NAME - ": Ricoh MMC Controller disabling driver\n"); - printk(KERN_INFO DRIVER_NAME ": Copyright(c) Philip Langdale\n"); - - return pci_register_driver(&ricoh_mmc_driver); -} - -static void __exit ricoh_mmc_drv_exit(void) -{ - pci_unregister_driver(&ricoh_mmc_driver); -} - -module_init(ricoh_mmc_drv_init); -module_exit(ricoh_mmc_drv_exit); - -MODULE_AUTHOR("Philip Langdale "); -MODULE_DESCRIPTION("Ricoh MMC Controller disabling driver"); -MODULE_LICENSE("GPL"); - diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 039e87b71442..81d19d5683ac 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2533,6 +2533,91 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov); #endif /* CONFIG_PCI_IOV */ +/* + * This is a quirk for the Ricoh MMC controller found as a part of + * some mulifunction chips. + + * This is very similiar and based on the ricoh_mmc driver written by + * Philip Langdale. Thank you for these magic sequences. + * + * These chips implement the four main memory card controllers (SD, MMC, MS, xD) + * and one or both of cardbus or firewire. + * + * It happens that they implement SD and MMC + * support as separate controllers (and PCI functions). The linux SDHCI + * driver supports MMC cards but the chip detects MMC cards in hardware + * and directs them to the MMC controller - so the SDHCI driver never sees + * them. + * + * To get around this, we must disable the useless MMC controller. + * At that point, the SDHCI controller will start seeing them + * It seems to be the case that the relevant PCI registers to deactivate the + * MMC controller live on PCI function 0, which might be the cardbus controller + * or the firewire controller, depending on the particular chip in question + * + * This has to be done early, because as soon as we disable the MMC controller + * other pci functions shift up one level, e.g. function #2 becomes function + * #1, and this will confuse the pci core. + */ + +#ifdef CONFIG_MMC_RICOH_MMC +static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) +{ + /* disable via cardbus interface */ + u8 write_enable; + u8 write_target; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + + pci_read_config_byte(dev, 0xB7, &disable); + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0x8E, &write_enable); + pci_write_config_byte(dev, 0x8E, 0xAA); + pci_read_config_byte(dev, 0x8D, &write_target); + pci_write_config_byte(dev, 0x8D, 0xB7); + pci_write_config_byte(dev, 0xB7, disable | 0x02); + pci_write_config_byte(dev, 0x8E, write_enable); + pci_write_config_byte(dev, 0x8D, write_target); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); + +static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) +{ + /* disable via firewire interface */ + u8 write_enable; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + + pci_read_config_byte(dev, 0xCB, &disable); + + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0xCA, &write_enable); + pci_write_config_byte(dev, 0xCA, 0x57); + pci_write_config_byte(dev, 0xCB, disable | 0x02); + pci_write_config_byte(dev, 0xCA, write_enable); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +#endif /*CONFIG_MMC_RICOH_MMC*/ + + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { -- cgit v1.2.3 From 52cf25d0ab7f78eeecc59ac652ed5090f69b619e Mon Sep 17 00:00:00 2001 From: Emese Revfy Date: Tue, 19 Jan 2010 02:58:23 +0100 Subject: Driver core: Constify struct sysfs_ops in struct kobj_type Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy Acked-by: David Teigland Acked-by: Matt Domsch Acked-by: Maciej Sosnowski Acked-by: Hans J. Koch Acked-by: Pekka Enberg Acked-by: Jens Axboe Acked-by: Stephen Hemminger Signed-off-by: Greg Kroah-Hartman --- Documentation/kobject.txt | 2 +- arch/ia64/kernel/topology.c | 2 +- arch/powerpc/kernel/cacheinfo.c | 2 +- arch/sh/kernel/cpu/sh4/sq.c | 2 +- arch/x86/kernel/cpu/intel_cacheinfo.c | 2 +- arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 +- block/blk-integrity.c | 2 +- block/blk-sysfs.c | 2 +- block/elevator.c | 2 +- drivers/base/bus.c | 4 ++-- drivers/base/class.c | 2 +- drivers/base/core.c | 2 +- drivers/base/sys.c | 4 ++-- drivers/block/pktcdvd.c | 2 +- drivers/cpufreq/cpufreq.c | 2 +- drivers/cpuidle/sysfs.c | 4 ++-- drivers/dma/ioat/dma.c | 2 +- drivers/dma/ioat/dma.h | 2 +- drivers/edac/edac_device_sysfs.c | 6 +++--- drivers/edac/edac_mc_sysfs.c | 4 ++-- drivers/edac/edac_pci_sysfs.c | 4 ++-- drivers/firmware/edd.c | 2 +- drivers/firmware/efivars.c | 2 +- drivers/firmware/iscsi_ibft.c | 2 +- drivers/firmware/memmap.c | 2 +- drivers/gpu/drm/ttm/ttm_bo.c | 2 +- drivers/gpu/drm/ttm/ttm_memory.c | 2 +- drivers/infiniband/core/cm.c | 2 +- drivers/infiniband/core/sysfs.c | 2 +- drivers/md/dm-sysfs.c | 2 +- drivers/md/md.c | 4 ++-- drivers/net/ibmveth.c | 2 +- drivers/net/iseries_veth.c | 4 ++-- drivers/parisc/pdc_stable.c | 2 +- drivers/pci/hotplug/fakephp.c | 2 +- drivers/pci/slot.c | 2 +- drivers/uio/uio.c | 4 ++-- drivers/uwb/wlp/sysfs.c | 3 +-- drivers/video/omap2/dss/manager.c | 2 +- drivers/video/omap2/dss/overlay.c | 2 +- drivers/xen/sys-hypervisor.c | 2 +- fs/btrfs/sysfs.c | 4 ++-- fs/dlm/lockspace.c | 2 +- fs/ext4/super.c | 2 +- fs/gfs2/sys.c | 2 +- fs/ocfs2/cluster/masklog.c | 2 +- fs/sysfs/file.c | 8 ++++---- include/linux/kobject.h | 4 ++-- kernel/params.c | 2 +- lib/kobject.c | 2 +- mm/slub.c | 2 +- net/bridge/br_private.h | 2 +- net/bridge/br_sysfs_if.c | 2 +- samples/kobject/kset-example.c | 2 +- 54 files changed, 69 insertions(+), 70 deletions(-) (limited to 'drivers/pci') diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index c79ab996dada..bdb13817e1e9 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -266,7 +266,7 @@ kobj_type: struct kobj_type { void (*release)(struct kobject *); - struct sysfs_ops *sysfs_ops; + const struct sysfs_ops *sysfs_ops; struct attribute **default_attrs; }; diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 8f060352e129..b3a5818088d9 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -282,7 +282,7 @@ static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char * return ret; } -static struct sysfs_ops cache_sysfs_ops = { +static const struct sysfs_ops cache_sysfs_ops = { .show = cache_show }; diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c index bb37b1d19a58..01fe9ce28379 100644 --- a/arch/powerpc/kernel/cacheinfo.c +++ b/arch/powerpc/kernel/cacheinfo.c @@ -642,7 +642,7 @@ static struct kobj_attribute *cache_index_opt_attrs[] = { &cache_assoc_attr, }; -static struct sysfs_ops cache_index_ops = { +static const struct sysfs_ops cache_index_ops = { .show = cache_index_show, }; diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index fc065f9da6e5..14726eef1ce0 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -326,7 +326,7 @@ static struct attribute *sq_sysfs_attrs[] = { NULL, }; -static struct sysfs_ops sq_sysfs_ops = { +static const struct sysfs_ops sq_sysfs_ops = { .show = sq_sysfs_show, .store = sq_sysfs_store, }; diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index eddb1bdd1b8f..b3eeb66c0a51 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -903,7 +903,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops sysfs_ops = { +static const struct sysfs_ops sysfs_ops = { .show = show, .store = store, }; diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 83a3d1f4efca..cda932ca3ade 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -388,7 +388,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops threshold_ops = { +static const struct sysfs_ops threshold_ops = { .show = show, .store = store, }; diff --git a/block/blk-integrity.c b/block/blk-integrity.c index 15c630813b1c..96e83c2bdb94 100644 --- a/block/blk-integrity.c +++ b/block/blk-integrity.c @@ -278,7 +278,7 @@ static struct attribute *integrity_attrs[] = { NULL, }; -static struct sysfs_ops integrity_ops = { +static const struct sysfs_ops integrity_ops = { .show = &integrity_attr_show, .store = &integrity_attr_store, }; diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index e85442415db3..2ae2cb3f362f 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -450,7 +450,7 @@ static void blk_release_queue(struct kobject *kobj) kmem_cache_free(blk_requestq_cachep, q); } -static struct sysfs_ops queue_sysfs_ops = { +static const struct sysfs_ops queue_sysfs_ops = { .show = queue_attr_show, .store = queue_attr_store, }; diff --git a/block/elevator.c b/block/elevator.c index ee3a883840f2..df75676f6671 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -892,7 +892,7 @@ elv_attr_store(struct kobject *kobj, struct attribute *attr, return error; } -static struct sysfs_ops elv_sysfs_ops = { +static const struct sysfs_ops elv_sysfs_ops = { .show = elv_attr_show, .store = elv_attr_store, }; diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 2afe599eb35d..cca1aa10054c 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -70,7 +70,7 @@ static ssize_t drv_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops driver_sysfs_ops = { +static const struct sysfs_ops driver_sysfs_ops = { .show = drv_attr_show, .store = drv_attr_store, }; @@ -115,7 +115,7 @@ static ssize_t bus_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops bus_sysfs_ops = { +static const struct sysfs_ops bus_sysfs_ops = { .show = bus_attr_show, .store = bus_attr_store, }; diff --git a/drivers/base/class.c b/drivers/base/class.c index 2e297cc4cd3d..0147f476b8a9 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -63,7 +63,7 @@ static void class_release(struct kobject *kobj) kfree(cp); } -static struct sysfs_ops class_sysfs_ops = { +static const struct sysfs_ops class_sysfs_ops = { .show = class_attr_show, .store = class_attr_store, }; diff --git a/drivers/base/core.c b/drivers/base/core.c index 58ec1069f4b0..b0d6646a2814 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -100,7 +100,7 @@ static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops dev_sysfs_ops = { +static const struct sysfs_ops dev_sysfs_ops = { .show = dev_attr_show, .store = dev_attr_store, }; diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 747c99e0568b..8980feec5d14 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -54,7 +54,7 @@ sysdev_store(struct kobject *kobj, struct attribute *attr, return -EIO; } -static struct sysfs_ops sysfs_ops = { +static const struct sysfs_ops sysfs_ops = { .show = sysdev_show, .store = sysdev_store, }; @@ -104,7 +104,7 @@ static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr, return -EIO; } -static struct sysfs_ops sysfs_class_ops = { +static const struct sysfs_ops sysfs_class_ops = { .show = sysdev_class_show, .store = sysdev_class_store, }; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 73d815d3f1b2..39c8514442eb 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -284,7 +284,7 @@ static ssize_t kobj_pkt_store(struct kobject *kobj, return len; } -static struct sysfs_ops kobj_pkt_ops = { +static const struct sysfs_ops kobj_pkt_ops = { .show = kobj_pkt_show, .store = kobj_pkt_store }; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 67bc2ece7b4b..2d5d575e889d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -766,7 +766,7 @@ static void cpufreq_sysfs_release(struct kobject *kobj) complete(&policy->kobj_unregister); } -static struct sysfs_ops sysfs_ops = { +static const struct sysfs_ops sysfs_ops = { .show = show, .store = store, }; diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index c9cefacabf37..8719b36e1a4d 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -195,7 +195,7 @@ static ssize_t cpuidle_store(struct kobject * kobj, struct attribute * attr, return ret; } -static struct sysfs_ops cpuidle_sysfs_ops = { +static const struct sysfs_ops cpuidle_sysfs_ops = { .show = cpuidle_show, .store = cpuidle_store, }; @@ -281,7 +281,7 @@ static ssize_t cpuidle_state_show(struct kobject * kobj, return ret; } -static struct sysfs_ops cpuidle_state_sysfs_ops = { +static const struct sysfs_ops cpuidle_state_sysfs_ops = { .show = cpuidle_state_show, }; diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index af14c9a5b8d4..0099340b9616 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -1138,7 +1138,7 @@ ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page) return entry->show(&chan->common, page); } -struct sysfs_ops ioat_sysfs_ops = { +const struct sysfs_ops ioat_sysfs_ops = { .show = ioat_attr_show, }; diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 4f747a254074..86b97ac8774e 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -346,7 +346,7 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan, unsigned long *phys_complete); void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type); void ioat_kobject_del(struct ioatdma_device *device); -extern struct sysfs_ops ioat_sysfs_ops; +extern const struct sysfs_ops ioat_sysfs_ops; extern struct ioat_sysfs_entry ioat_version_attr; extern struct ioat_sysfs_entry ioat_cap_attr; #endif /* IOATDMA_H */ diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c index 53764577035f..5fdedbc0f545 100644 --- a/drivers/edac/edac_device_sysfs.c +++ b/drivers/edac/edac_device_sysfs.c @@ -137,7 +137,7 @@ static ssize_t edac_dev_ctl_info_store(struct kobject *kobj, } /* edac_dev file operations for an 'ctl_info' */ -static struct sysfs_ops device_ctl_info_ops = { +static const struct sysfs_ops device_ctl_info_ops = { .show = edac_dev_ctl_info_show, .store = edac_dev_ctl_info_store }; @@ -373,7 +373,7 @@ static ssize_t edac_dev_instance_store(struct kobject *kobj, } /* edac_dev file operations for an 'instance' */ -static struct sysfs_ops device_instance_ops = { +static const struct sysfs_ops device_instance_ops = { .show = edac_dev_instance_show, .store = edac_dev_instance_store }; @@ -476,7 +476,7 @@ static ssize_t edac_dev_block_store(struct kobject *kobj, } /* edac_dev file operations for a 'block' */ -static struct sysfs_ops device_block_ops = { +static const struct sysfs_ops device_block_ops = { .show = edac_dev_block_show, .store = edac_dev_block_store }; diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index e1d4ce083481..88840e9fa3e0 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -245,7 +245,7 @@ static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr, return -EIO; } -static struct sysfs_ops csrowfs_ops = { +static const struct sysfs_ops csrowfs_ops = { .show = csrowdev_show, .store = csrowdev_store }; @@ -575,7 +575,7 @@ static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr, } /* Intermediate show/store table */ -static struct sysfs_ops mci_ops = { +static const struct sysfs_ops mci_ops = { .show = mcidev_show, .store = mcidev_store }; diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index fb60a877d768..bef94e3d9944 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -121,7 +121,7 @@ static ssize_t edac_pci_instance_store(struct kobject *kobj, } /* fs_ops table */ -static struct sysfs_ops pci_instance_ops = { +static const struct sysfs_ops pci_instance_ops = { .show = edac_pci_instance_show, .store = edac_pci_instance_store }; @@ -261,7 +261,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj, return -EIO; } -static struct sysfs_ops edac_pci_sysfs_ops = { +static const struct sysfs_ops edac_pci_sysfs_ops = { .show = edac_pci_dev_show, .store = edac_pci_dev_store }; diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index 9e4f59dc7f1e..110e24e50883 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -122,7 +122,7 @@ edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf) return ret; } -static struct sysfs_ops edd_attr_ops = { +static const struct sysfs_ops edd_attr_ops = { .show = edd_attr_show, }; diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index f4f709d1370b..082f06ecd327 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -362,7 +362,7 @@ static ssize_t efivar_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops efivar_attr_ops = { +static const struct sysfs_ops efivar_attr_ops = { .show = efivar_attr_show, .store = efivar_attr_store, }; diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index a3600e3ed0fa..ed2801c378de 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -519,7 +519,7 @@ static ssize_t ibft_show_attribute(struct kobject *kobj, return ret; } -static struct sysfs_ops ibft_attr_ops = { +static const struct sysfs_ops ibft_attr_ops = { .show = ibft_show_attribute, }; diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 20f645743ead..d59f7cad2269 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -74,7 +74,7 @@ static struct attribute *def_attrs[] = { NULL }; -static struct sysfs_ops memmap_attr_ops = { +static const struct sysfs_ops memmap_attr_ops = { .show = memmap_attr_show, }; diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index c7320ce4567d..89c38c49066f 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -128,7 +128,7 @@ static struct attribute *ttm_bo_global_attrs[] = { NULL }; -static struct sysfs_ops ttm_bo_global_ops = { +static const struct sysfs_ops ttm_bo_global_ops = { .show = &ttm_bo_global_show }; diff --git a/drivers/gpu/drm/ttm/ttm_memory.c b/drivers/gpu/drm/ttm/ttm_memory.c index f5245c02b8fd..eb143e04d402 100644 --- a/drivers/gpu/drm/ttm/ttm_memory.c +++ b/drivers/gpu/drm/ttm/ttm_memory.c @@ -152,7 +152,7 @@ static struct attribute *ttm_mem_zone_attrs[] = { NULL }; -static struct sysfs_ops ttm_mem_zone_ops = { +static const struct sysfs_ops ttm_mem_zone_ops = { .show = &ttm_mem_zone_show, .store = &ttm_mem_zone_store }; diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 5130fc55b8e2..764787ebe8d8 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3597,7 +3597,7 @@ static ssize_t cm_show_counter(struct kobject *obj, struct attribute *attr, atomic_long_read(&group->counter[cm_attr->index])); } -static struct sysfs_ops cm_counter_ops = { +static const struct sysfs_ops cm_counter_ops = { .show = cm_show_counter }; diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 158a214da2f7..1558bb7fc74d 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -79,7 +79,7 @@ static ssize_t port_attr_show(struct kobject *kobj, return port_attr->show(p, port_attr, buf); } -static struct sysfs_ops port_sysfs_ops = { +static const struct sysfs_ops port_sysfs_ops = { .show = port_attr_show }; diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c index f91b40942e07..84d2b91e4efb 100644 --- a/drivers/md/dm-sysfs.c +++ b/drivers/md/dm-sysfs.c @@ -75,7 +75,7 @@ static struct attribute *dm_attrs[] = { NULL, }; -static struct sysfs_ops dm_sysfs_ops = { +static const struct sysfs_ops dm_sysfs_ops = { .show = dm_attr_show, }; diff --git a/drivers/md/md.c b/drivers/md/md.c index a20a71e5efd3..fdc1890b6ac5 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2642,7 +2642,7 @@ static void rdev_free(struct kobject *ko) mdk_rdev_t *rdev = container_of(ko, mdk_rdev_t, kobj); kfree(rdev); } -static struct sysfs_ops rdev_sysfs_ops = { +static const struct sysfs_ops rdev_sysfs_ops = { .show = rdev_attr_show, .store = rdev_attr_store, }; @@ -4059,7 +4059,7 @@ static void md_free(struct kobject *ko) kfree(mddev); } -static struct sysfs_ops md_sysfs_ops = { +static const struct sysfs_ops md_sysfs_ops = { .show = md_attr_show, .store = md_attr_store, }; diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index f2b937966950..0bc777bac9b4 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -1577,7 +1577,7 @@ static struct attribute * veth_pool_attrs[] = { NULL, }; -static struct sysfs_ops veth_pool_ops = { +static const struct sysfs_ops veth_pool_ops = { .show = veth_pool_show, .store = veth_pool_store, }; diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 966de5d69521..e6e972d9b7ca 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -384,7 +384,7 @@ static struct attribute *veth_cnx_default_attrs[] = { NULL }; -static struct sysfs_ops veth_cnx_sysfs_ops = { +static const struct sysfs_ops veth_cnx_sysfs_ops = { .show = veth_cnx_attribute_show }; @@ -441,7 +441,7 @@ static struct attribute *veth_port_default_attrs[] = { NULL }; -static struct sysfs_ops veth_port_sysfs_ops = { +static const struct sysfs_ops veth_port_sysfs_ops = { .show = veth_port_attribute_show }; diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 0bc5d474b168..1062b8ffe244 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -481,7 +481,7 @@ pdcspath_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops pdcspath_attr_ops = { +static const struct sysfs_ops pdcspath_attr_ops = { .show = pdcspath_attr_show, .store = pdcspath_attr_store, }; diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 6151389fd903..0a894efd4b9b 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -73,7 +73,7 @@ static void legacy_release(struct kobject *kobj) } static struct kobj_type legacy_ktype = { - .sysfs_ops = &(struct sysfs_ops){ + .sysfs_ops = &(const struct sysfs_ops){ .store = legacy_store, .show = legacy_show }, .release = &legacy_release, diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 49c9e6c9779a..f75a44d37fbe 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -29,7 +29,7 @@ static ssize_t pci_slot_attr_store(struct kobject *kobj, return attribute->store ? attribute->store(slot, buf, len) : -EIO; } -static struct sysfs_ops pci_slot_sysfs_ops = { +static const struct sysfs_ops pci_slot_sysfs_ops = { .show = pci_slot_attr_show, .store = pci_slot_attr_store, }; diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index e941367dd28f..4de382acd8f2 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -129,7 +129,7 @@ static ssize_t map_type_show(struct kobject *kobj, struct attribute *attr, return entry->show(mem, buf); } -static struct sysfs_ops map_sysfs_ops = { +static const struct sysfs_ops map_sysfs_ops = { .show = map_type_show, }; @@ -217,7 +217,7 @@ static ssize_t portio_type_show(struct kobject *kobj, struct attribute *attr, return entry->show(port, buf); } -static struct sysfs_ops portio_sysfs_ops = { +static const struct sysfs_ops portio_sysfs_ops = { .show = portio_type_show, }; diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c index 0370399ff4bb..6627c94cc854 100644 --- a/drivers/uwb/wlp/sysfs.c +++ b/drivers/uwb/wlp/sysfs.c @@ -615,8 +615,7 @@ ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static -struct sysfs_ops wss_sysfs_ops = { +static const struct sysfs_ops wss_sysfs_ops = { .show = wlp_wss_attr_show, .store = wlp_wss_attr_store, }; diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 913142d4cab1..9acef00c47ea 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -341,7 +341,7 @@ static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr, return manager_attr->store(manager, buf, size); } -static struct sysfs_ops manager_sysfs_ops = { +static const struct sysfs_ops manager_sysfs_ops = { .show = manager_attr_show, .store = manager_attr_store, }; diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c index 0c5bea263ac6..aed3f3194347 100644 --- a/drivers/video/omap2/dss/overlay.c +++ b/drivers/video/omap2/dss/overlay.c @@ -320,7 +320,7 @@ static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr, return overlay_attr->store(overlay, buf, size); } -static struct sysfs_ops overlay_sysfs_ops = { +static const struct sysfs_ops overlay_sysfs_ops = { .show = overlay_attr_show, .store = overlay_attr_store, }; diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c index ae5cb05a1a1c..bb71ab2336c8 100644 --- a/drivers/xen/sys-hypervisor.c +++ b/drivers/xen/sys-hypervisor.c @@ -426,7 +426,7 @@ static ssize_t hyp_sysfs_store(struct kobject *kobj, return 0; } -static struct sysfs_ops hyp_sysfs_ops = { +static const struct sysfs_ops hyp_sysfs_ops = { .show = hyp_sysfs_show, .store = hyp_sysfs_store, }; diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c index a240b6fa81df..4ce16ef702a3 100644 --- a/fs/btrfs/sysfs.c +++ b/fs/btrfs/sysfs.c @@ -164,12 +164,12 @@ static void btrfs_root_release(struct kobject *kobj) complete(&root->kobj_unregister); } -static struct sysfs_ops btrfs_super_attr_ops = { +static const struct sysfs_ops btrfs_super_attr_ops = { .show = btrfs_super_attr_show, .store = btrfs_super_attr_store, }; -static struct sysfs_ops btrfs_root_attr_ops = { +static const struct sysfs_ops btrfs_root_attr_ops = { .show = btrfs_root_attr_show, .store = btrfs_root_attr_store, }; diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index 26a8bd40400a..f994a7dfda85 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -148,7 +148,7 @@ static void lockspace_kobj_release(struct kobject *k) kfree(ls); } -static struct sysfs_ops dlm_attr_ops = { +static const struct sysfs_ops dlm_attr_ops = { .show = dlm_attr_show, .store = dlm_attr_store, }; diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 2b83b96cb2eb..ce84a6ed4a48 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2358,7 +2358,7 @@ static void ext4_sb_release(struct kobject *kobj) } -static struct sysfs_ops ext4_attr_ops = { +static const struct sysfs_ops ext4_attr_ops = { .show = ext4_attr_show, .store = ext4_attr_store, }; diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index 543503010ed0..419042f7f0b6 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -49,7 +49,7 @@ static ssize_t gfs2_attr_store(struct kobject *kobj, struct attribute *attr, return a->store ? a->store(sdp, buf, len) : len; } -static struct sysfs_ops gfs2_attr_ops = { +static const struct sysfs_ops gfs2_attr_ops = { .show = gfs2_attr_show, .store = gfs2_attr_store, }; diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c index b39da877b12f..3bb928a2bf7d 100644 --- a/fs/ocfs2/cluster/masklog.c +++ b/fs/ocfs2/cluster/masklog.c @@ -136,7 +136,7 @@ static ssize_t mlog_store(struct kobject *obj, struct attribute *attr, return mlog_mask_store(mlog_attr->mask, buf, count); } -static struct sysfs_ops mlog_attr_ops = { +static const struct sysfs_ops mlog_attr_ops = { .show = mlog_show, .store = mlog_store, }; diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 50b725bcc3f3..ced2299f1c9a 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -53,7 +53,7 @@ struct sysfs_buffer { size_t count; loff_t pos; char * page; - struct sysfs_ops * ops; + const struct sysfs_ops * ops; struct mutex mutex; int needs_read_fill; int event; @@ -75,7 +75,7 @@ static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer { struct sysfs_dirent *attr_sd = dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; - struct sysfs_ops * ops = buffer->ops; + const struct sysfs_ops * ops = buffer->ops; int ret = 0; ssize_t count; @@ -199,7 +199,7 @@ flush_write_buffer(struct dentry * dentry, struct sysfs_buffer * buffer, size_t { struct sysfs_dirent *attr_sd = dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; - struct sysfs_ops * ops = buffer->ops; + const struct sysfs_ops * ops = buffer->ops; int rc; /* need attr_sd for attr and ops, its parent for kobj */ @@ -335,7 +335,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; struct sysfs_buffer *buffer; - struct sysfs_ops *ops; + const struct sysfs_ops *ops; int error = -EACCES; char *p; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 57a1eaae9096..3950d3c2850d 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -106,7 +106,7 @@ extern char *kobject_get_path(struct kobject *kobj, gfp_t flag); struct kobj_type { void (*release)(struct kobject *kobj); - struct sysfs_ops *sysfs_ops; + const struct sysfs_ops *sysfs_ops; struct attribute **default_attrs; }; @@ -132,7 +132,7 @@ struct kobj_attribute { const char *buf, size_t count); }; -extern struct sysfs_ops kobj_sysfs_ops; +extern const struct sysfs_ops kobj_sysfs_ops; /** * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem. diff --git a/kernel/params.c b/kernel/params.c index 48370be3c0a1..68396d73c838 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -722,7 +722,7 @@ static ssize_t module_attr_store(struct kobject *kobj, return ret; } -static struct sysfs_ops module_sysfs_ops = { +static const struct sysfs_ops module_sysfs_ops = { .show = module_attr_show, .store = module_attr_store, }; diff --git a/lib/kobject.c b/lib/kobject.c index cecf5a0ef6e1..8115eb1bbf4d 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -700,7 +700,7 @@ static ssize_t kobj_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -struct sysfs_ops kobj_sysfs_ops = { +const struct sysfs_ops kobj_sysfs_ops = { .show = kobj_attr_show, .store = kobj_attr_store, }; diff --git a/mm/slub.c b/mm/slub.c index a26753c12dcd..a2b8969ba6d0 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4390,7 +4390,7 @@ static void kmem_cache_release(struct kobject *kobj) kfree(s); } -static struct sysfs_ops slab_sysfs_ops = { +static const struct sysfs_ops slab_sysfs_ops = { .show = slab_attr_show, .store = slab_attr_store, }; diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 1cf2cef78584..fef0384e3c0b 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -423,7 +423,7 @@ extern void br_ifinfo_notify(int event, struct net_bridge_port *port); #ifdef CONFIG_SYSFS /* br_sysfs_if.c */ -extern struct sysfs_ops brport_sysfs_ops; +extern const struct sysfs_ops brport_sysfs_ops; extern int br_sysfs_addif(struct net_bridge_port *p); /* br_sysfs_br.c */ diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c index 696596cd3384..0b9916489d6b 100644 --- a/net/bridge/br_sysfs_if.c +++ b/net/bridge/br_sysfs_if.c @@ -238,7 +238,7 @@ static ssize_t brport_store(struct kobject * kobj, return ret; } -struct sysfs_ops brport_sysfs_ops = { +const struct sysfs_ops brport_sysfs_ops = { .show = brport_show, .store = brport_store, }; diff --git a/samples/kobject/kset-example.c b/samples/kobject/kset-example.c index 7c6088140528..3b126d1f8599 100644 --- a/samples/kobject/kset-example.c +++ b/samples/kobject/kset-example.c @@ -87,7 +87,7 @@ static ssize_t foo_attr_store(struct kobject *kobj, } /* Our custom sysfs_ops that we will associate with our ktype later on */ -static struct sysfs_ops foo_sysfs_ops = { +static const struct sysfs_ops foo_sysfs_ops = { .show = foo_attr_show, .store = foo_attr_store, }; -- cgit v1.2.3 From a07e4156a2ee6359d31a44946d7ee7f85dbf6bca Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Thu, 11 Feb 2010 15:23:05 -0800 Subject: sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes These are the non-static sysfs attributes that exist on my test machine. Fix them to use sysfs_attr_init or sysfs_bin_attr_init as appropriate. It simply requires making a sysfs attribute present to see this. So this is a little bit tedious but otherwise not too bad. Signed-off-by: Eric W. Biederman Acked-by: WANG Cong Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/cpu/mcheck/mce.c | 1 + drivers/acpi/system.c | 2 ++ drivers/pci/pci-sysfs.c | 5 +++++ kernel/params.c | 1 + 4 files changed, 9 insertions(+) (limited to 'drivers/pci') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index a8aacd4b513c..28cba46bf32c 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -2044,6 +2044,7 @@ static __init void mce_init_banks(void) struct mce_bank *b = &mce_banks[i]; struct sysdev_attribute *a = &b->attr; + sysfs_attr_init(&a->attr); a->attr.name = b->attrname; snprintf(b->attrname, ATTR_LEN, "bank%d", i); diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index a206a12da78a..743f2445e2a1 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -101,6 +101,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, struct acpi_table_header *header = NULL; struct acpi_table_attr *attr = NULL; + sysfs_attr_init(&table_attr->attr.attr); if (table_header->signature[0] != '\0') memcpy(table_attr->name, table_header->signature, ACPI_NAME_SIZE); @@ -475,6 +476,7 @@ void acpi_irq_stats_init(void) goto fail; strncpy(name, buffer, strlen(buffer) + 1); + sysfs_attr_init(&counter_attrs[i].attr); counter_attrs[i].attr.name = name; counter_attrs[i].attr.mode = 0644; counter_attrs[i].show = counter_show; diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 807224ec8351..9fa183cfb0e9 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -642,6 +642,7 @@ void pci_create_legacy_files(struct pci_bus *b) if (!b->legacy_io) goto kzalloc_err; + sysfs_bin_attr_init(&b->legacy_io); b->legacy_io->attr.name = "legacy_io"; b->legacy_io->size = 0xffff; b->legacy_io->attr.mode = S_IRUSR | S_IWUSR; @@ -654,6 +655,7 @@ void pci_create_legacy_files(struct pci_bus *b) goto legacy_io_err; /* Allocated above after the legacy_io struct */ + sysfs_bin_attr_init(&b->legacy_mem); b->legacy_mem = b->legacy_io + 1; b->legacy_mem->attr.name = "legacy_mem"; b->legacy_mem->size = 1024*1024; @@ -800,6 +802,7 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) if (res_attr) { char *res_attr_name = (char *)(res_attr + 1); + sysfs_bin_attr_init(res_attr); if (write_combine) { pdev->res_attr_wc[num] = res_attr; sprintf(res_attr_name, "resource%d_wc", num); @@ -972,6 +975,7 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev) if (!attr) return -ENOMEM; + sysfs_bin_attr_init(attr); attr->size = dev->vpd->len; attr->attr.name = "vpd"; attr->attr.mode = S_IRUSR | S_IWUSR; @@ -1038,6 +1042,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) retval = -ENOMEM; goto err_resource_files; } + sysfs_bin_attr_init(attr); attr->size = rom_size; attr->attr.name = "rom"; attr->attr.mode = S_IRUSR; diff --git a/kernel/params.c b/kernel/params.c index 68396d73c838..d55a53ec9234 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -516,6 +516,7 @@ static __modinit int add_sysfs_param(struct module_kobject *mk, new->grp.attrs = attrs; /* Tack new one on the end. */ + sysfs_attr_init(&new->attrs[num].mattr.attr); new->attrs[num].param = kp; new->attrs[num].mattr.show = param_attr_show; new->attrs[num].mattr.store = param_attr_store; -- cgit v1.2.3 From 62e877b893e6350c900d381f353aa62ed48dcc97 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 1 Mar 2010 20:38:36 +1100 Subject: sysfs: fix for thinko with sysfs_bin_attr_init() After merging the final tree, today's linux-next build (powerpc allyesconfig) failed like this: drivers/pci/pci-sysfs.c: In function 'pci_create_legacy_files': drivers/pci/pci-sysfs.c:645: error: lvalue required as unary '&' operand drivers/pci/pci-sysfs.c:658: error: lvalue required as unary '&' operand Caused by commit "sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes" interacting with commit "sysfs: Use one lockdep class per sysfs attribute") both from the driver-core tree. Signed-off-by: Stephen Rothwell Cc: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci-sysfs.c | 4 ++-- include/linux/sysfs.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 9fa183cfb0e9..de296452c957 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -642,7 +642,7 @@ void pci_create_legacy_files(struct pci_bus *b) if (!b->legacy_io) goto kzalloc_err; - sysfs_bin_attr_init(&b->legacy_io); + sysfs_bin_attr_init(b->legacy_io); b->legacy_io->attr.name = "legacy_io"; b->legacy_io->size = 0xffff; b->legacy_io->attr.mode = S_IRUSR | S_IWUSR; @@ -655,7 +655,7 @@ void pci_create_legacy_files(struct pci_bus *b) goto legacy_io_err; /* Allocated above after the legacy_io struct */ - sysfs_bin_attr_init(&b->legacy_mem); + sysfs_bin_attr_init(b->legacy_mem); b->legacy_mem = b->legacy_io + 1; b->legacy_mem->attr.name = "legacy_mem"; b->legacy_mem->size = 1024*1024; diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index d77cde6d0498..f0496b3d1811 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -110,7 +110,7 @@ struct bin_attribute { * enabled. Lockdep gives a nice error when your attribute is * added to sysfs if you don't have this. */ -#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&bin_attr->attr) +#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr) struct sysfs_ops { ssize_t (*show)(struct kobject *, struct attribute *,char *); -- cgit v1.2.3 From 8e9394ce2412254ec69fd2a4f3e44a66eade2297 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 17 Feb 2010 10:57:05 -0800 Subject: Driver core: create lock/unlock functions for struct device In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner Cc: Jean Delvare Cc: Dave Young Cc: Ming Lei Cc: Jiri Kosina Cc: Phil Carmody Cc: Arjan van de Ven Cc: Cornelia Huck Cc: Rafael J. Wysocki Cc: Pavel Machek Cc: Len Brown Cc: Magnus Damm Cc: Alan Stern Cc: Randy Dunlap Cc: Stefan Richter Cc: David Brownell Cc: Vegard Nossum Cc: Jesse Barnes Cc: Alex Chiang Cc: Kenji Kaneshige Cc: Andrew Morton Cc: Andrew Patterson Cc: Yu Zhao Cc: Dominik Brodowski Cc: Samuel Ortiz Cc: Wolfram Sang Cc: CHENG Renquan Cc: Oliver Neukum Cc: Frans Pop Cc: David Vrabel Cc: Kay Sievers Cc: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 20 ++++++++++---------- drivers/base/dd.c | 38 +++++++++++++++++++------------------- drivers/base/power/main.c | 20 ++++++++++---------- drivers/firewire/core-device.c | 5 ++--- drivers/ieee1394/nodemgr.c | 5 ++--- drivers/pci/bus.c | 4 ++-- drivers/pci/pci.c | 4 ++-- drivers/pcmcia/ds.c | 8 ++++---- drivers/usb/core/driver.c | 4 ++-- drivers/uwb/umc-bus.c | 4 ++-- drivers/uwb/uwb-internal.h | 4 ++-- include/linux/device.h | 17 ++++++++++++++++- include/linux/usb.h | 6 +++--- 13 files changed, 76 insertions(+), 63 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/base/bus.c b/drivers/base/bus.c index cca1aa10054c..71f6af5c8b0b 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -173,10 +173,10 @@ static ssize_t driver_unbind(struct device_driver *drv, dev = bus_find_device_by_name(bus, NULL, buf); if (dev && dev->driver == drv) { if (dev->parent) /* Needed for USB */ - down(&dev->parent->sem); + device_lock(dev->parent); device_release_driver(dev); if (dev->parent) - up(&dev->parent->sem); + device_unlock(dev->parent); err = count; } put_device(dev); @@ -200,12 +200,12 @@ static ssize_t driver_bind(struct device_driver *drv, dev = bus_find_device_by_name(bus, NULL, buf); if (dev && dev->driver == NULL && driver_match_device(drv, dev)) { if (dev->parent) /* Needed for USB */ - down(&dev->parent->sem); - down(&dev->sem); + device_lock(dev->parent); + device_lock(dev); err = driver_probe_device(drv, dev); - up(&dev->sem); + device_unlock(dev); if (dev->parent) - up(&dev->parent->sem); + device_unlock(dev->parent); if (err > 0) { /* success */ @@ -744,10 +744,10 @@ static int __must_check bus_rescan_devices_helper(struct device *dev, if (!dev->driver) { if (dev->parent) /* Needed for USB */ - down(&dev->parent->sem); + device_lock(dev->parent); ret = device_attach(dev); if (dev->parent) - up(&dev->parent->sem); + device_unlock(dev->parent); } return ret < 0 ? ret : 0; } @@ -779,10 +779,10 @@ int device_reprobe(struct device *dev) { if (dev->driver) { if (dev->parent) /* Needed for USB */ - down(&dev->parent->sem); + device_lock(dev->parent); device_release_driver(dev); if (dev->parent) - up(&dev->parent->sem); + device_unlock(dev->parent); } return bus_rescan_devices_helper(dev, NULL); } diff --git a/drivers/base/dd.c b/drivers/base/dd.c index ee95c76bfd3d..c89291f8a16b 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -85,7 +85,7 @@ static void driver_sysfs_remove(struct device *dev) * for before calling this. (It is ok to call with no other effort * from a driver's probe() method.) * - * This function must be called with @dev->sem held. + * This function must be called with the device lock held. */ int device_bind_driver(struct device *dev) { @@ -190,8 +190,8 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe); * This function returns -ENODEV if the device is not registered, * 1 if the device is bound successfully and 0 otherwise. * - * This function must be called with @dev->sem held. When called for a - * USB interface, @dev->parent->sem must be held as well. + * This function must be called with @dev lock held. When called for a + * USB interface, @dev->parent lock must be held as well. */ int driver_probe_device(struct device_driver *drv, struct device *dev) { @@ -233,13 +233,13 @@ static int __device_attach(struct device_driver *drv, void *data) * 0 if no matching driver was found; * -ENODEV if the device is not registered. * - * When called for a USB interface, @dev->parent->sem must be held. + * When called for a USB interface, @dev->parent lock must be held. */ int device_attach(struct device *dev) { int ret = 0; - down(&dev->sem); + device_lock(dev); if (dev->driver) { ret = device_bind_driver(dev); if (ret == 0) @@ -253,7 +253,7 @@ int device_attach(struct device *dev) ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach); pm_runtime_put_sync(dev); } - up(&dev->sem); + device_unlock(dev); return ret; } EXPORT_SYMBOL_GPL(device_attach); @@ -276,13 +276,13 @@ static int __driver_attach(struct device *dev, void *data) return 0; if (dev->parent) /* Needed for USB */ - down(&dev->parent->sem); - down(&dev->sem); + device_lock(dev->parent); + device_lock(dev); if (!dev->driver) driver_probe_device(drv, dev); - up(&dev->sem); + device_unlock(dev); if (dev->parent) - up(&dev->parent->sem); + device_unlock(dev->parent); return 0; } @@ -303,8 +303,8 @@ int driver_attach(struct device_driver *drv) EXPORT_SYMBOL_GPL(driver_attach); /* - * __device_release_driver() must be called with @dev->sem held. - * When called for a USB interface, @dev->parent->sem must be held as well. + * __device_release_driver() must be called with @dev lock held. + * When called for a USB interface, @dev->parent lock must be held as well. */ static void __device_release_driver(struct device *dev) { @@ -343,7 +343,7 @@ static void __device_release_driver(struct device *dev) * @dev: device. * * Manually detach device from driver. - * When called for a USB interface, @dev->parent->sem must be held. + * When called for a USB interface, @dev->parent lock must be held. */ void device_release_driver(struct device *dev) { @@ -352,9 +352,9 @@ void device_release_driver(struct device *dev) * within their ->remove callback for the same device, they * will deadlock right here. */ - down(&dev->sem); + device_lock(dev); __device_release_driver(dev); - up(&dev->sem); + device_unlock(dev); } EXPORT_SYMBOL_GPL(device_release_driver); @@ -381,13 +381,13 @@ void driver_detach(struct device_driver *drv) spin_unlock(&drv->p->klist_devices.k_lock); if (dev->parent) /* Needed for USB */ - down(&dev->parent->sem); - down(&dev->sem); + device_lock(dev->parent); + device_lock(dev); if (dev->driver == drv) __device_release_driver(dev); - up(&dev->sem); + device_unlock(dev); if (dev->parent) - up(&dev->parent->sem); + device_unlock(dev->parent); put_device(dev); } } diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 0e26a6f6fd48..d477f4dc5e51 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -35,8 +35,8 @@ * because children are guaranteed to be discovered after parents, and * are inserted at the back of the list on discovery. * - * Since device_pm_add() may be called with a device semaphore held, - * we must never try to acquire a device semaphore while holding + * Since device_pm_add() may be called with a device lock held, + * we must never try to acquire a device lock while holding * dpm_list_mutex. */ @@ -508,7 +508,7 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) TRACE_RESUME(0); dpm_wait(dev->parent, async); - down(&dev->sem); + device_lock(dev); dev->power.status = DPM_RESUMING; @@ -543,7 +543,7 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) } } End: - up(&dev->sem); + device_unlock(dev); complete_all(&dev->power.completion); TRACE_RESUME(error); @@ -629,7 +629,7 @@ static void dpm_resume(pm_message_t state) */ static void device_complete(struct device *dev, pm_message_t state) { - down(&dev->sem); + device_lock(dev); if (dev->class && dev->class->pm && dev->class->pm->complete) { pm_dev_dbg(dev, state, "completing class "); @@ -646,7 +646,7 @@ static void device_complete(struct device *dev, pm_message_t state) dev->bus->pm->complete(dev); } - up(&dev->sem); + device_unlock(dev); } /** @@ -809,7 +809,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) int error = 0; dpm_wait_for_children(dev, async); - down(&dev->sem); + device_lock(dev); if (async_error) goto End; @@ -849,7 +849,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) dev->power.status = DPM_OFF; End: - up(&dev->sem); + device_unlock(dev); complete_all(&dev->power.completion); return error; @@ -938,7 +938,7 @@ static int device_prepare(struct device *dev, pm_message_t state) { int error = 0; - down(&dev->sem); + device_lock(dev); if (dev->bus && dev->bus->pm && dev->bus->pm->prepare) { pm_dev_dbg(dev, state, "preparing "); @@ -962,7 +962,7 @@ static int device_prepare(struct device *dev, pm_message_t state) suspend_report_result(dev->class->pm->prepare, error); } End: - up(&dev->sem); + device_unlock(dev); return error; } diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c index 014cabd3afda..5db0518c66da 100644 --- a/drivers/firewire/core-device.c +++ b/drivers/firewire/core-device.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include @@ -828,9 +827,9 @@ static int update_unit(struct device *dev, void *data) struct fw_driver *driver = (struct fw_driver *)dev->driver; if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) { - down(&dev->sem); + device_lock(dev); driver->update(unit); - up(&dev->sem); + device_unlock(dev); } return 0; diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 5122b5a8aa2d..18350213479e 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include "csr.h" @@ -1397,9 +1396,9 @@ static int update_pdrv(struct device *dev, void *data) pdrv = container_of(drv, struct hpsb_protocol_driver, driver); if (pdrv->update) { - down(&ud->device.sem); + device_lock(&ud->device); error = pdrv->update(ud); - up(&ud->device.sem); + device_unlock(&ud->device); } if (error) device_release_driver(&ud->device); diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 712250f5874a..26301cb25e7f 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -288,9 +288,9 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), next = dev->bus_list.next; /* Run device routines with the device locked */ - down(&dev->dev.sem); + device_lock(&dev->dev); retval = cb(dev, userdata); - up(&dev->dev.sem); + device_unlock(&dev->dev); if (retval) break; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 77b493b3d97b..897fa5ccdb78 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2486,7 +2486,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) if (!probe) { pci_block_user_cfg_access(dev); /* block PM suspend, driver probe, etc. */ - down(&dev->dev.sem); + device_lock(&dev->dev); } rc = pci_dev_specific_reset(dev, probe); @@ -2508,7 +2508,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) rc = pci_parent_bus_reset(dev, probe); done: if (!probe) { - up(&dev->dev.sem); + device_unlock(&dev->dev); pci_unblock_user_cfg_access(dev); } diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 0f98be4450b7..ad93ebd7b2a2 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -971,9 +971,9 @@ static int runtime_suspend(struct device *dev) { int rc; - down(&dev->sem); + device_lock(dev); rc = pcmcia_dev_suspend(dev, PMSG_SUSPEND); - up(&dev->sem); + device_unlock(dev); return rc; } @@ -981,9 +981,9 @@ static int runtime_resume(struct device *dev) { int rc; - down(&dev->sem); + device_lock(dev); rc = pcmcia_dev_resume(dev); - up(&dev->sem); + device_unlock(dev); return rc; } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index a7037bf81688..f3c233806fa3 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -489,10 +489,10 @@ void usb_driver_release_interface(struct usb_driver *driver, if (device_is_registered(dev)) { device_release_driver(dev); } else { - down(&dev->sem); + device_lock(dev); usb_unbind_interface(dev); dev->driver = NULL; - up(&dev->sem); + device_unlock(dev); } } EXPORT_SYMBOL_GPL(usb_driver_release_interface); diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c index cdd6c8efc9f8..5fad4e791b3e 100644 --- a/drivers/uwb/umc-bus.c +++ b/drivers/uwb/umc-bus.c @@ -62,12 +62,12 @@ int umc_controller_reset(struct umc_dev *umc) struct device *parent = umc->dev.parent; int ret = 0; - if(down_trylock(&parent->sem)) + if (device_trylock(parent)) return -EAGAIN; ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper); if (ret >= 0) ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper); - up(&parent->sem); + device_unlock(parent); return ret; } diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h index d5bcfc1c227a..157485c862c0 100644 --- a/drivers/uwb/uwb-internal.h +++ b/drivers/uwb/uwb-internal.h @@ -366,12 +366,12 @@ struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal); static inline void uwb_dev_lock(struct uwb_dev *uwb_dev) { - down(&uwb_dev->dev.sem); + device_lock(&uwb_dev->dev); } static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev) { - up(&uwb_dev->dev.sem); + device_unlock(&uwb_dev->dev); } #endif /* #ifndef __UWB_INTERNAL_H__ */ diff --git a/include/linux/device.h b/include/linux/device.h index f95d5bfe8248..182192892d45 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -106,7 +106,7 @@ extern int bus_unregister_notifier(struct bus_type *bus, /* All 4 notifers below get called with the target struct device * * as an argument. Note that those functions are likely to be called - * with the device semaphore held in the core, so be careful. + * with the device lock held in the core, so be careful. */ #define BUS_NOTIFY_ADD_DEVICE 0x00000001 /* device added */ #define BUS_NOTIFY_DEL_DEVICE 0x00000002 /* device removed */ @@ -508,6 +508,21 @@ static inline bool device_async_suspend_enabled(struct device *dev) return !!dev->power.async_suspend; } +static inline void device_lock(struct device *dev) +{ + down(&dev->sem); +} + +static inline int device_trylock(struct device *dev) +{ + return down_trylock(&dev->sem); +} + +static inline void device_unlock(struct device *dev) +{ + up(&dev->sem); +} + void driver_init(void); /* diff --git a/include/linux/usb.h b/include/linux/usb.h index 3492abf82e75..8c9f053111bb 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -512,9 +512,9 @@ extern struct usb_device *usb_get_dev(struct usb_device *dev); extern void usb_put_dev(struct usb_device *dev); /* USB device locking */ -#define usb_lock_device(udev) down(&(udev)->dev.sem) -#define usb_unlock_device(udev) up(&(udev)->dev.sem) -#define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem) +#define usb_lock_device(udev) device_lock(&(udev)->dev) +#define usb_unlock_device(udev) device_unlock(&(udev)->dev) +#define usb_trylock_device(udev) device_trylock(&(udev)->dev) extern int usb_lock_device_for_reset(struct usb_device *udev, const struct usb_interface *iface); -- cgit v1.2.3 From a6475c132278c1be158a13872c233aeab8a00176 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 18 Jan 2010 15:27:10 +0100 Subject: microblaze: Enable PCI, missing files There are two parts of changes. The first is just enable PCI in Makefiles and in Kconfig. The second is the rest of missing files. I didn't want to add it with previous patch because that patch is too big. Current Microblaze toolchain has problem with weak symbols that's why is necessary to apply this changes to be possible to compile pci support. Xilinx knows about this problem. Signed-off-by: Michal Simek --- arch/microblaze/Kconfig | 15 ++++ arch/microblaze/Makefile | 1 + arch/microblaze/include/asm/io.h | 16 +++- arch/microblaze/include/asm/pgtable.h | 15 ++++ arch/microblaze/include/asm/prom.h | 15 ++++ arch/microblaze/pci/Makefile | 5 ++ arch/microblaze/pci/indirect_pci.c | 163 ++++++++++++++++++++++++++++++++++ arch/microblaze/pci/iomap.c | 39 ++++++++ drivers/pci/Makefile | 1 + 9 files changed, 269 insertions(+), 1 deletion(-) create mode 100644 arch/microblaze/pci/Makefile create mode 100644 arch/microblaze/pci/indirect_pci.c create mode 100644 arch/microblaze/pci/iomap.c (limited to 'drivers/pci') diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 71ec04137417..e1fa0844ba4e 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -256,6 +256,21 @@ source "fs/Kconfig.binfmt" endmenu +menu "Bus Options" + +config PCI + bool "PCI support" + +config PCI_DOMAINS + def_bool PCI + +config PCI_SYSCALL + def_bool PCI + +source "drivers/pci/Kconfig" + +endmenu + source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index d2d6cfcb1a30..836832dd9b26 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -50,6 +50,7 @@ libs-y += $(LIBGCC) core-y += arch/microblaze/kernel/ core-y += arch/microblaze/mm/ core-y += arch/microblaze/platform/ +core-$(CONFIG_PCI) += arch/microblaze/pci/ drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/ diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index f82df5d221a8..06d804b15a51 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -17,7 +17,21 @@ #include /* Get struct page {...} */ #include -#define PCI_DRAM_OFFSET 0 +#ifndef CONFIG_PCI +#define _IO_BASE 0 +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#else +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET pci_dram_offset +#endif + +extern unsigned long isa_io_base; +extern unsigned long pci_io_base; +extern unsigned long pci_dram_offset; + +extern resource_size_t isa_mem_base; #define IO_SPACE_LIMIT (0xFFFFFFFF) diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index cc3a4dfc3eaa..1c47f6f8bfb6 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -89,6 +89,21 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } #endif /* __ASSEMBLY__ */ +/* + * Macro to mark a page protection value as "uncacheable". + */ + +#define _PAGE_CACHE_CTL (_PAGE_GUARDED | _PAGE_NO_CACHE | \ + _PAGE_WRITETHRU) + +#define pgprot_noncached(prot) \ + (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ + _PAGE_NO_CACHE | _PAGE_GUARDED)) + +#define pgprot_noncached_wc(prot) \ + (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ + _PAGE_NO_CACHE)) + /* * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash * table containing PTEs, together with a set of 16 segment registers, to diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index 03f45a963204..e7d67a329bd7 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -31,6 +31,21 @@ /* Other Prototypes */ extern int early_uartlite_console(void); +#ifdef CONFIG_PCI +/* + * PCI <-> OF matching functions + * (XXX should these be here?) + */ +struct pci_bus; +struct pci_dev; +extern int pci_device_from_OF_node(struct device_node *node, + u8 *bus, u8 *devfn); +extern struct device_node *pci_busdev_to_OF_node(struct pci_bus *bus, + int devfn); +extern struct device_node *pci_device_to_OF_node(struct pci_dev *dev); +extern void pci_create_OF_bus_map(void); +#endif + /* * OF address retreival & translation */ diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile new file mode 100644 index 000000000000..2b8901864b23 --- /dev/null +++ b/arch/microblaze/pci/Makefile @@ -0,0 +1,5 @@ +# +# Makefile +# + +obj-$(CONFIG_PCI) += pci_32.o pci-common.o indirect_pci.o iomap.o diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c new file mode 100644 index 000000000000..25f18f017f21 --- /dev/null +++ b/arch/microblaze/pci/indirect_pci.c @@ -0,0 +1,163 @@ +/* + * Support for indirect PCI bridges. + * + * Copyright (C) 1998 Gabriel Paubert. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +static int +indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + volatile void __iomem *cfg_data; + u8 cfg_type = 0; + u32 bus_no, reg; + + if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) { + if (bus->number != hose->first_busno) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE) + if (bus->number != hose->first_busno) + cfg_type = 1; + + bus_no = (bus->number == hose->first_busno) ? + hose->self_busno : bus->number; + + if (hose->indirect_type & INDIRECT_TYPE_EXT_REG) + reg = ((offset & 0xf00) << 16) | (offset & 0xfc); + else + reg = offset & 0xfc; /* Only 3 bits for function */ + + if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN) + out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + else + out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */ + switch (len) { + case 1: + *val = in_8(cfg_data); + break; + case 2: + *val = in_le16(cfg_data); + break; + default: + *val = in_le32(cfg_data); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int +indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + volatile void __iomem *cfg_data; + u8 cfg_type = 0; + u32 bus_no, reg; + + if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) { + if (bus->number != hose->first_busno) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE) + if (bus->number != hose->first_busno) + cfg_type = 1; + + bus_no = (bus->number == hose->first_busno) ? + hose->self_busno : bus->number; + + if (hose->indirect_type & INDIRECT_TYPE_EXT_REG) + reg = ((offset & 0xf00) << 16) | (offset & 0xfc); + else + reg = offset & 0xfc; + + if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN) + out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + else + out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + + /* surpress setting of PCI_PRIMARY_BUS */ + if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) + if ((offset == PCI_PRIMARY_BUS) && + (bus->number == hose->first_busno)) + val &= 0xffffff00; + + /* Workaround for PCI_28 Errata in 440EPx/GRx */ + if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) && + offset == PCI_CACHE_LINE_SIZE) { + val = 0; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + (offset & 3); + switch (len) { + case 1: + out_8(cfg_data, val); + break; + case 2: + out_le16(cfg_data, val); + break; + default: + out_le32(cfg_data, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops indirect_pci_ops = { + .read = indirect_read_config, + .write = indirect_write_config, +}; + +void __init +setup_indirect_pci(struct pci_controller *hose, + resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags) +{ + resource_size_t base = cfg_addr & PAGE_MASK; + void __iomem *mbase; + + mbase = ioremap(base, PAGE_SIZE); + hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK); + if ((cfg_data & PAGE_MASK) != base) + mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE); + hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK); + hose->ops = &indirect_pci_ops; + hose->indirect_type = flags; +} diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c new file mode 100644 index 000000000000..3fbf16f4e16c --- /dev/null +++ b/arch/microblaze/pci/iomap.c @@ -0,0 +1,39 @@ +/* + * ppc64 "iomap" interface implementation. + * + * (C) Copyright 2004 Linus Torvalds + */ +#include +#include +#include +#include +#include + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len) + return NULL; + if (max && len > max) + len = max; + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) + return ioremap(start, len); + /* What? */ + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + if (isa_vaddr_is_ioport(addr)) + return; + if (pcibios_vaddr_is_ioport(addr)) + return; + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 3d102dd87c9f..0b51857fbaf7 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_PPC) += setup-bus.o obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o +obj-$(CONFIG_MICROBLAZE) += setup-bus.o # # ACPI Related PCI FW Functions -- cgit v1.2.3 From e3c4bccabaf3e5c13f4b307c7737cbe8d0cecd02 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 10 Mar 2010 15:23:38 -0800 Subject: dma-mapping: pci: convert pci_set_dma_mask to call dma_set_mask This changes pci_set_dma_mask to call the generic DMA API, dma_set_mask. pci_set_dma_mask (in drivers/pci/pci.c) does the same things that dma_set_mask does on all the architectures that use pci_set_dma_mask; calls dma_supprted and sets dev->dma_mask. So we safely change pci_set_dma_mask to simply call dma_set_mask. Signed-off-by: FUJITA Tomonori Cc: James Bottomley Cc: David S. Miller Cc: Jesse Barnes Acked-by: Benjamin Herrenschmidt Cc: Russell King Cc: Greg KH Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/pci.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index fdcf01af6762..b2d23d1b0d41 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2305,15 +2305,13 @@ void pci_msi_off(struct pci_dev *dev) int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { - if (!pci_dma_supported(dev, mask)) - return -EIO; - - dev->dma_mask = mask; + int ret = dma_set_mask(&dev->dev, mask); + if (ret) + return ret; dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask)); - return 0; } - + int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) { -- cgit v1.2.3 From 6a1961f49ee8d7339ea2454443dfc0460e0b2748 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 10 Mar 2010 15:23:39 -0800 Subject: dma-mapping: dma-mapping.h: add dma_set_coherent_mask dma_set_coherent_mask corresponds to pci_set_consistent_dma_mask. This is necessary to move to the generic device model DMA API from the PCI bus specific API in the long term. dma_set_coherent_mask works in the exact same way that pci_set_consistent_dma_mask does. So this patch also changes pci_set_consistent_dma_mask to call dma_set_coherent_mask. Signed-off-by: FUJITA Tomonori Cc: James Bottomley Cc: David S. Miller Cc: Jesse Barnes Cc: Benjamin Herrenschmidt Cc: Russell King Cc: Greg KH Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DMA-API.txt | 10 ++++++++++ drivers/pci/pci.c | 7 +++---- include/linux/dma-mapping.h | 8 ++++++++ 3 files changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 29a48fbae779..0fc5728ed487 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -167,6 +167,16 @@ parameters if it is. Returns: 0 if successful and a negative error if not. +int +dma_set_coherent_mask(struct device *dev, u64 mask) +int +pci_set_consistent_dma_mask(struct pci_device *dev, u64 mask) + +Checks to see if the mask is possible and updates the device +parameters if it is. + +Returns: 0 if successful and a negative error if not. + u64 dma_get_required_mask(struct device *dev) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index b2d23d1b0d41..929fd3932032 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2315,12 +2315,11 @@ pci_set_dma_mask(struct pci_dev *dev, u64 mask) int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) { - if (!pci_dma_supported(dev, mask)) - return -EIO; + int ret = dma_set_coherent_mask(&dev->dev, mask); + if (ret) + return ret; - dev->dev.coherent_dma_mask = mask; dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask)); - return 0; } #endif diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index c5ac9d49cc06..ca32ed78b057 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -127,6 +127,14 @@ static inline u64 dma_get_mask(struct device *dev) return DMA_BIT_MASK(32); } +static inline int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + if (!dma_supported(dev, mask)) + return -EIO; + dev->coherent_dma_mask = mask; + return 0; +} + extern u64 dma_get_required_mask(struct device *dev); static inline unsigned int dma_get_max_seg_size(struct device *dev) -- cgit v1.2.3 From 5f3cd1e0bb452c31a306a3e764514ea2eaf7d2e0 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 10 Mar 2010 15:23:41 -0800 Subject: dma-mapping: pci: move pci_set_dma_mask and pci_set_consistent_dma_mask to pci-dma-compat.h We can use pci-dma-compat.h to implement pci_set_dma_mask and pci_set_consistent_dma_mask as we do with the other PCI DMA API. We can remove HAVE_ARCH_PCI_SET_DMA_MASK too. Signed-off-by: FUJITA Tomonori Cc: Jesse Barnes Cc: Greg KH Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/pci.c | 28 ---------------------------- include/asm-generic/pci-dma-compat.h | 15 ++++++++++++--- include/linux/pci.h | 2 -- 3 files changed, 12 insertions(+), 33 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 929fd3932032..cb1dd5f4988c 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2298,32 +2298,6 @@ void pci_msi_off(struct pci_dev *dev) } } -#ifndef HAVE_ARCH_PCI_SET_DMA_MASK -/* - * These can be overridden by arch-specific implementations - */ -int -pci_set_dma_mask(struct pci_dev *dev, u64 mask) -{ - int ret = dma_set_mask(&dev->dev, mask); - if (ret) - return ret; - dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask)); - return 0; -} - -int -pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) -{ - int ret = dma_set_coherent_mask(&dev->dev, mask); - if (ret) - return ret; - - dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask)); - return 0; -} -#endif - #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size) { @@ -3065,8 +3039,6 @@ EXPORT_SYMBOL(pci_set_mwi); EXPORT_SYMBOL(pci_try_set_mwi); EXPORT_SYMBOL(pci_clear_mwi); EXPORT_SYMBOL_GPL(pci_intx); -EXPORT_SYMBOL(pci_set_dma_mask); -EXPORT_SYMBOL(pci_set_consistent_dma_mask); EXPORT_SYMBOL(pci_assign_resource); EXPORT_SYMBOL(pci_find_parent_resource); EXPORT_SYMBOL(pci_select_bars); diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h index 37b3706226e7..1437b7da09b2 100644 --- a/include/asm-generic/pci-dma-compat.h +++ b/include/asm-generic/pci-dma-compat.h @@ -6,9 +6,6 @@ #include -/* note pci_set_dma_mask isn't here, since it's a public function - * exported from drivers/pci, use dma_supported instead */ - static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) { @@ -104,4 +101,16 @@ pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr) return dma_mapping_error(&pdev->dev, dma_addr); } +#ifdef CONFIG_PCI +static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) +{ + return dma_set_mask(&dev->dev, mask); +} + +static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) +{ + return dma_set_coherent_mask(&dev->dev, mask); +} +#endif + #endif diff --git a/include/linux/pci.h b/include/linux/pci.h index 7fd5c574efae..a788fa12ff31 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -769,8 +769,6 @@ int pci_try_set_mwi(struct pci_dev *dev); void pci_clear_mwi(struct pci_dev *dev); void pci_intx(struct pci_dev *dev, int enable); void pci_msi_off(struct pci_dev *dev); -int pci_set_dma_mask(struct pci_dev *dev, u64 mask); -int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask); int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size); int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask); int pcix_get_max_mmrbc(struct pci_dev *dev); -- cgit v1.2.3 From d06070509147c948a06056da619c9dc2ed349805 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 25 Feb 2010 10:59:34 +0800 Subject: acpiphp: Execute ACPI _REG method for hotadded devices Per ACPI spec, _ERG method should be executed before device driver gets control for hotpluged device. Firmware might do some configuration there. See http://bugzilla.kernel.org/show_bug.cgi?id=10805. In this machine, _REG method of docked device will configure cardbus bridge. Signed-off-by: Shaohua Li Tested-by: Paul Martin Signed-off-by: Len Brown --- drivers/pci/hotplug/acpiphp_glue.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index cb2fd01eddae..b5dad9f37453 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -749,6 +749,24 @@ static int acpiphp_bus_trim(acpi_handle handle) return retval; } +static void acpiphp_set_acpi_region(struct acpiphp_slot *slot) +{ + struct acpiphp_func *func; + union acpi_object params[2]; + struct acpi_object_list arg_list; + + list_for_each_entry(func, &slot->funcs, sibling) { + arg_list.count = 2; + arg_list.pointer = params; + params[0].type = ACPI_TYPE_INTEGER; + params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG; + params[1].type = ACPI_TYPE_INTEGER; + params[1].integer.value = 1; + /* _REG is optional, we don't care about if there is failure */ + acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL); + } +} + /** * enable_device - enable, configure a slot * @slot: slot to be enabled @@ -805,6 +823,7 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_bus_assign_resources(bus); acpiphp_sanitize_bus(bus); acpiphp_set_hpp_values(bus); + acpiphp_set_acpi_region(slot); pci_enable_bridges(bus); pci_bus_add_devices(bus); -- cgit v1.2.3 From 6757eca348fbbdd4ab1020e565f325cd6a6b2698 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 10 Mar 2010 22:48:34 +0000 Subject: sysfs: Initialised pci bus legacy_mem field before use PPC64 is failing to boot the latest mmotm due to an uninitialised pointer in pci_create_legacy_files(). The surprise is that machines boot at all and it would appear to affect current mainline as well. This patch fixes the problem. Signed-off-by: Mel Gorman Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index de296452c957..997668558e79 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -655,8 +655,8 @@ void pci_create_legacy_files(struct pci_bus *b) goto legacy_io_err; /* Allocated above after the legacy_io struct */ - sysfs_bin_attr_init(b->legacy_mem); b->legacy_mem = b->legacy_io + 1; + sysfs_bin_attr_init(b->legacy_mem); b->legacy_mem->attr.name = "legacy_mem"; b->legacy_mem->size = 1024*1024; b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR; -- cgit v1.2.3 From 25daeb550b69e89aff59bc6a84218a12b5203531 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 9 Mar 2010 22:26:40 -0500 Subject: PCI: fix return value from pcix_get_max_mmrbc() For the PCI_X_STATUS register, pcix_get_max_mmrbc() is returning an incorrect value, which is based on: (stat & PCI_X_STATUS_MAX_READ) >> 12 Valid return values are 512, 1024, 2048, 4096, which correspond to a 'stat' (masked and right shifted by 21) of 0, 1, 2, 3, respectively. A right shift by 11 would generate the correct return value when 'stat' (masked and right shifted by 21) has a value of 1 or 2. But for a value of 0 or 3 it's not possible to generate the correct return value by only right shifting. Fix is based on pcix_get_mmrbc()'s similar dealings with the PCI_X_CMD register. Cc: stable@kernel.org Signed-off-by: Dean Nelson Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index cb1dd5f4988c..ed9eb68fd940 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2587,7 +2587,7 @@ int pcix_get_max_mmrbc(struct pci_dev *dev) if (err) return -EINVAL; - return (stat & PCI_X_STATUS_MAX_READ) >> 12; + return 512 << ((stat & PCI_X_STATUS_MAX_READ) >> 21); } EXPORT_SYMBOL(pcix_get_max_mmrbc); -- cgit v1.2.3 From ded1d8f29b4d315a2093cafc3ee17ac870a87972 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 11 Mar 2010 14:08:33 -0800 Subject: PCI: kill off pci_register_set_vga_state() symbol export. When pci_register_set_vga_state() was made __init, the EXPORT_SYMBOL() was retained, which now leaves us with a section mismatch. Signed-off-by: Paul Mundt Cc: Mike Travis Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ed9eb68fd940..9af986085d09 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3023,7 +3023,6 @@ EXPORT_SYMBOL(pcim_pin_device); EXPORT_SYMBOL(pci_disable_device); EXPORT_SYMBOL(pci_find_capability); EXPORT_SYMBOL(pci_bus_find_capability); -EXPORT_SYMBOL(pci_register_set_vga_state); EXPORT_SYMBOL(pci_release_regions); EXPORT_SYMBOL(pci_request_regions); EXPORT_SYMBOL(pci_request_regions_exclusive); -- cgit v1.2.3 From bdc2bda7c4dd253026cc1fce45fc939304749029 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 9 Mar 2010 22:26:48 -0500 Subject: PCI: fix access of PCI_X_CMD by pcix get and set mmrbc functions An e1000 driver on a system with a PCI-X bus was always being returned a value of 135 from both pcix_get_mmrbc() and pcix_set_mmrbc(). This value reflects an error return of PCIBIOS_BAD_REGISTER_NUMBER from pci_bus_read_config_dword(,, cap + PCI_X_CMD,). This is because for a dword, the following portion of the PCI_OP_READ() macro: if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; expands to: if (pos & 3) return PCIBIOS_BAD_REGISTER_NUMBER; And is always true for 'cap + PCI_X_CMD', which is 0xe4 + 2 = 0xe6. ('cap' is the result of calling pci_find_capability(, PCI_CAP_ID_PCIX).) The same problem exists for pci_bus_write_config_dword(,, cap + PCI_X_CMD,). In both cases, instead of calling _dword(), _word() should be called. Cc: stable@kernel.org Signed-off-by: Dean Nelson Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 9af986085d09..5c80b59c5931 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2601,13 +2601,13 @@ EXPORT_SYMBOL(pcix_get_max_mmrbc); int pcix_get_mmrbc(struct pci_dev *dev) { int ret, cap; - u32 cmd; + u16 cmd; cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (!cap) return -EINVAL; - ret = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd); + ret = pci_read_config_word(dev, cap + PCI_X_CMD, &cmd); if (!ret) ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2); @@ -2627,7 +2627,8 @@ EXPORT_SYMBOL(pcix_get_mmrbc); int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc) { int cap, err = -EINVAL; - u32 stat, cmd, v, o; + u32 stat, v, o; + u16 cmd; if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc)) goto out; @@ -2645,7 +2646,7 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc) if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21) return -E2BIG; - err = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd); + err = pci_read_config_word(dev, cap + PCI_X_CMD, &cmd); if (err) goto out; @@ -2657,7 +2658,7 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc) cmd &= ~PCI_X_CMD_MAX_READ; cmd |= v << 2; - err = pci_write_config_dword(dev, cap + PCI_X_CMD, cmd); + err = pci_write_config_word(dev, cap + PCI_X_CMD, cmd); } out: return err; -- cgit v1.2.3 From 7c9e2b1c4784c6e574f69dbd904b2822f2e04d6e Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 9 Mar 2010 22:26:55 -0500 Subject: PCI: cleanup error return for pcix get and set mmrbc functions pcix_get_mmrbc() returns the maximum memory read byte count (mmrbc), if successful, or an appropriate error value, if not. Distinguishing errors from correct values and understanding the meaning of an error can be somewhat confusing in that: correct values: 512, 1024, 2048, 4096 errors: -EINVAL -22 PCIBIOS_FUNC_NOT_SUPPORTED 0x81 PCIBIOS_BAD_VENDOR_ID 0x83 PCIBIOS_DEVICE_NOT_FOUND 0x86 PCIBIOS_BAD_REGISTER_NUMBER 0x87 PCIBIOS_SET_FAILED 0x88 PCIBIOS_BUFFER_TOO_SMALL 0x89 The PCIBIOS_ errors are returned from the PCI functions generated by the PCI_OP_READ() and PCI_OP_WRITE() macros. In a similar manner, pcix_set_mmrbc() also returns the PCIBIOS_ error values returned from pci_read_config_[word|dword]() and pci_write_config_word(). Following pcix_get_max_mmrbc()'s example, the following patch simply returns -EINVAL for all PCIBIOS_ errors encountered by pcix_get_mmrbc(), and -EINVAL or -EIO for those encountered by pcix_set_mmrbc(). This simplification was chosen in light of the fact that none of the current callers of these functions are interested in the specific type of error encountered. In the future, should this change, one could simply create a function that maps each PCIBIOS_ error to a corresponding unique errno value, which could be called by pcix_get_max_mmrbc(), pcix_get_mmrbc(), and pcix_set_mmrbc(). Additionally, this patch eliminates some unnecessary variables. Cc: stable@kernel.org Signed-off-by: Dean Nelson Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 36 ++++++++++++++++-------------------- 1 file changed, 16 insertions(+), 20 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5c80b59c5931..1531f3a49879 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2576,15 +2576,14 @@ EXPORT_SYMBOL_GPL(pci_reset_function); */ int pcix_get_max_mmrbc(struct pci_dev *dev) { - int err, cap; + int cap; u32 stat; cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (!cap) return -EINVAL; - err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat); - if (err) + if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat)) return -EINVAL; return 512 << ((stat & PCI_X_STATUS_MAX_READ) >> 21); @@ -2600,18 +2599,17 @@ EXPORT_SYMBOL(pcix_get_max_mmrbc); */ int pcix_get_mmrbc(struct pci_dev *dev) { - int ret, cap; + int cap; u16 cmd; cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (!cap) return -EINVAL; - ret = pci_read_config_word(dev, cap + PCI_X_CMD, &cmd); - if (!ret) - ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2); + if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd)) + return -EINVAL; - return ret; + return 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2); } EXPORT_SYMBOL(pcix_get_mmrbc); @@ -2626,29 +2624,27 @@ EXPORT_SYMBOL(pcix_get_mmrbc); */ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc) { - int cap, err = -EINVAL; + int cap; u32 stat, v, o; u16 cmd; if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc)) - goto out; + return -EINVAL; v = ffs(mmrbc) - 10; cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (!cap) - goto out; + return -EINVAL; - err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat); - if (err) - goto out; + if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat)) + return -EINVAL; if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21) return -E2BIG; - err = pci_read_config_word(dev, cap + PCI_X_CMD, &cmd); - if (err) - goto out; + if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd)) + return -EINVAL; o = (cmd & PCI_X_CMD_MAX_READ) >> 2; if (o != v) { @@ -2658,10 +2654,10 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc) cmd &= ~PCI_X_CMD_MAX_READ; cmd |= v << 2; - err = pci_write_config_word(dev, cap + PCI_X_CMD, cmd); + if (pci_write_config_word(dev, cap + PCI_X_CMD, cmd)) + return -EIO; } -out: - return err; + return 0; } EXPORT_SYMBOL(pcix_set_mmrbc); -- cgit v1.2.3 From 966f3a7570447c5025d67a618d408e68a3ae3167 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 11 Mar 2010 17:01:19 -0700 Subject: PCI: for address space collisions, show conflicting resource With request_resource_conflict(), we can learn what the actual conflict is, so print that info for debugging purposes. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/setup-res.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 7d678bb15ffb..17bed18d24ad 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -93,8 +93,7 @@ void pci_update_resource(struct pci_dev *dev, int resno) int pci_claim_resource(struct pci_dev *dev, int resource) { struct resource *res = &dev->resource[resource]; - struct resource *root; - int err; + struct resource *root, *conflict; root = pci_find_parent_resource(dev, res); if (!root) { @@ -103,12 +102,15 @@ int pci_claim_resource(struct pci_dev *dev, int resource) return -EINVAL; } - err = request_resource(root, res); - if (err) + conflict = request_resource_conflict(root, res); + if (conflict) { dev_err(&dev->dev, - "address space collision: %pR already in use\n", res); + "address space collision: %pR conflicts with %s %pR\n", + res, conflict->name, conflict); + return -EBUSY; + } - return err; + return 0; } EXPORT_SYMBOL(pci_claim_resource); -- cgit v1.2.3 From 99ddd552fef7e6e3b7dc76ba8fee9ea5869d1e14 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 16 Mar 2010 15:52:58 -0600 Subject: PCI: break out primary/secondary/subordinate for readability No functional change; just add names for the primary/secondary/subordinate bus numbers read from config space rather than repeatedly masking/shifting. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2a943090a3b7..7feacf521e14 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -673,16 +673,20 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); u32 buses, i, j = 0; u16 bctl; + u8 primary, secondary, subordinate; int broken = 0; pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); + primary = buses & 0xFF; + secondary = (buses >> 8) & 0xFF; + subordinate = (buses >> 16) & 0xFF; - dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n", - buses & 0xffffff, pass); + dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n", + secondary, subordinate, pass); /* Check if setup is sensible at all */ if (!pass && - ((buses & 0xff) != bus->number || ((buses >> 8) & 0xff) <= bus->number)) { + (primary != bus->number || secondary <= bus->number)) { dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n"); broken = 1; } @@ -693,15 +697,15 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); - if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus && !broken) { - unsigned int cmax, busnr; + if ((secondary || subordinate) && !pcibios_assign_all_busses() && + !is_cardbus && !broken) { + unsigned int cmax; /* * Bus already configured by firmware, process it in the first * pass and just note the configuration. */ if (pass) goto out; - busnr = (buses >> 8) & 0xFF; /* * If we already got to this bus through a different bridge, @@ -710,13 +714,13 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, * However, we continue to descend down the hierarchy and * scan remaining child buses. */ - child = pci_find_bus(pci_domain_nr(bus), busnr); + child = pci_find_bus(pci_domain_nr(bus), secondary); if (!child) { - child = pci_add_new_bus(bus, dev, busnr); + child = pci_add_new_bus(bus, dev, secondary); if (!child) goto out; - child->primary = buses & 0xFF; - child->subordinate = (buses >> 16) & 0xFF; + child->primary = primary; + child->subordinate = subordinate; child->bridge_ctl = bctl; } -- cgit v1.2.3 From 7b8ff6da028232aadae6bcc7c7406c8966d0b3c4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 16 Mar 2010 15:53:03 -0600 Subject: PCI: make disabled window printk style match the enabled ones No functional change; this just tweaks the changes from 349e1823a405 so the new printks for disabled PCI-to-PCI bridge windows match the ones for the enabled windows. Signed-off-by: Bjorn Helgaas CC: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 7feacf521e14..c82548afcd5c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -312,7 +312,7 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child) dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } else { dev_printk(KERN_DEBUG, &dev->dev, - " bridge window [io %04lx - %04lx] reg reading\n", + " bridge window [io %#06lx-%#06lx] (disabled)\n", base, limit); } } @@ -336,7 +336,7 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child) dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } else { dev_printk(KERN_DEBUG, &dev->dev, - " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n", + " bridge window [mem %#010lx-%#010lx] (disabled)\n", base, limit + 0xfffff); } } @@ -387,7 +387,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } else { dev_printk(KERN_DEBUG, &dev->dev, - " bridge window [mem 0x%08lx - %08lx pref] reg reading\n", + " bridge window [mem %#010lx-%#010lx pref] (disabled)\n", base, limit + 0xfffff); } } -- cgit v1.2.3 From e1944c6b0fba80a7837c1cbc47dfbf46e1274a4b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 16 Mar 2010 15:53:08 -0600 Subject: PCI: print resources consistently with %pR No functional change; just print resources in the conventional style. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 5 ++--- drivers/pci/ioapic.c | 9 ++++----- drivers/pcmcia/rsrc_nonstatic.c | 12 ++++-------- 3 files changed, 10 insertions(+), 16 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 40b48f569b1e..9665d6b17a2a 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -832,9 +832,8 @@ static inline void dbg_ctrl(struct controller *ctrl) for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { if (!pci_resource_len(pdev, i)) continue; - ctrl_info(ctrl, " PCI resource [%d] : 0x%llx@0x%llx\n", - i, (unsigned long long)pci_resource_len(pdev, i), - (unsigned long long)pci_resource_start(pdev, i)); + ctrl_info(ctrl, " PCI resource [%d] : %pR\n", + i, &pdev->resource[i]); } ctrl_info(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap); ctrl_info(ctrl, " Physical Slot Number : %d\n", PSN(ctrl)); diff --git a/drivers/pci/ioapic.c b/drivers/pci/ioapic.c index 3e0d7b5dd1b9..fb9fdf4a42bf 100644 --- a/drivers/pci/ioapic.c +++ b/drivers/pci/ioapic.c @@ -31,9 +31,9 @@ static int ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent) acpi_status status; unsigned long long gsb; struct ioapic *ioapic; - u64 addr; int ret; char *type; + struct resource *res; handle = DEVICE_ACPI_HANDLE(&dev->dev); if (!handle) @@ -69,13 +69,12 @@ static int ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent) if (pci_request_region(dev, 0, type)) goto exit_disable; - addr = pci_resource_start(dev, 0); - if (acpi_register_ioapic(ioapic->handle, addr, ioapic->gsi_base)) + res = &dev->resource[0]; + if (acpi_register_ioapic(ioapic->handle, res->start, ioapic->gsi_base)) goto exit_release; pci_set_drvdata(dev, ioapic); - dev_info(&dev->dev, "%s at %#llx, GSI %u\n", type, addr, - ioapic->gsi_base); + dev_info(&dev->dev, "%s at %pR, GSI %u\n", type, res, ioapic->gsi_base); return 0; exit_release: diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 4663b3fa9f96..b4968ca5bc9d 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -867,10 +867,8 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s) if (res == &ioport_resource) continue; dev_printk(KERN_INFO, &s->cb_dev->dev, - "pcmcia: parent PCI bridge I/O " - "window: 0x%llx - 0x%llx\n", - (unsigned long long)res->start, - (unsigned long long)res->end); + "pcmcia: parent PCI bridge window: %pR\n", + res); if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end)) done |= IORESOURCE_IO; @@ -880,10 +878,8 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s) if (res == &iomem_resource) continue; dev_printk(KERN_INFO, &s->cb_dev->dev, - "pcmcia: parent PCI bridge Memory " - "window: 0x%llx - 0x%llx\n", - (unsigned long long)res->start, - (unsigned long long)res->end); + "pcmcia: parent PCI bridge window: %pR\n", + res); if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end)) done |= IORESOURCE_MEM; } -- cgit v1.2.3 From c519a5a7dab2d8e9a114f003e2d369bcf8e913f3 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 19 Mar 2010 14:56:27 -0600 Subject: PCI: complain about devices that seem to be broken If we can tell that a device isn't working correctly, we should tell the user to make debugging easier. Otherwise, it can take a lot of work to determine whether the problem is in the driver, PCMCIA, PCI, hardware, etc., as in http://bugzilla.kernel.org/show_bug.cgi?id=12006 Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index c82548afcd5c..882bd8d29fe3 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -174,14 +174,19 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pci_read_config_dword(dev, pos, &sz); pci_write_config_dword(dev, pos, l); + if (!sz) + goto fail; /* BAR not implemented */ + /* * All bits set in sz means the device isn't working properly. - * If the BAR isn't implemented, all bits must be 0. If it's a - * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit - * 1 must be clear. + * If it's a memory BAR or a ROM, bit 0 must be clear; if it's + * an io BAR, bit 1 must be clear. */ - if (!sz || sz == 0xffffffff) + if (sz == 0xffffffff) { + dev_err(&dev->dev, "reg %x: invalid size %#x; broken device?\n", + pos, sz); goto fail; + } /* * I don't know how l can have all bits set. Copied from old code. @@ -244,13 +249,17 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pos, res); } } else { - sz = pci_size(l, sz, mask); + u32 size = pci_size(l, sz, mask); - if (!sz) + if (!size) { + dev_err(&dev->dev, "reg %x: invalid size " + "(l %#x sz %#x mask %#x); broken device?", + pos, l, sz, mask); goto fail; + } res->start = l; - res->end = l + sz; + res->end = l + size; dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } -- cgit v1.2.3 From ca8463926306580c25e62eb901a206530d480cae Mon Sep 17 00:00:00 2001 From: Tim Yamin Date: Fri, 19 Mar 2010 14:22:58 -0700 Subject: PCI quirk: only apply CX700 PCI bus parking quirk if external VT6212L is present Apply the CX700 quirk only when an external VT6212L is present (which is the case for the errant hardware the quirk was written for), don't touch the settings otherwise -- Hauppage PVR-500 tuners need PCI Bus Parking in order to work and when that's turned on everything seems to behave fine. I guess the underlying problem is a combination of an external VT6212L and the CX700 rather than the CX700's PCI being broken completely for all cases... Reported-by: Jeroen Roos Signed-off-by: Tim Yamin Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 81d19d5683ac..8284958fc530 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1977,11 +1977,25 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) /* * Disable PCI Bus Parking and PCI Master read caching on CX700 * which causes unspecified timing errors with a VT6212L on the PCI - * bus leading to USB2.0 packet loss. The defaults are that these - * features are turned off but some BIOSes turn them on. + * bus leading to USB2.0 packet loss. + * + * This quirk is only enabled if a second (on the external PCI bus) + * VT6212L is found -- the CX700 core itself also contains a USB + * host controller with the same PCI ID as the VT6212L. */ + /* Count VT6212L instances */ + struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8235_USB_2, NULL); uint8_t b; + + /* p should contain the first (internal) VT6212L -- see if we have + an external one by searching again */ + p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); + if (!p) + return; + pci_dev_put(p); + if (pci_read_config_byte(dev, 0x76, &b) == 0) { if (b & 0x40) { /* Turn off PCI Bus Parking */ @@ -2008,7 +2022,7 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) } } } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); /* * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the -- cgit v1.2.3 From a5ee4eb75413c145334c30e43f1af9875dad6fd7 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 22 Mar 2010 09:52:16 +0100 Subject: PCI quirk: RS780/RS880: work around missing MSI initialization AMD says in section 2.5.4 (GFX MSI Enable) of #43291 (AMD 780G Family Register Programming Requirements): The SBIOS must enable internal graphics MSI capability in GCCFG by setting the following: NBCFG.NB_CNTL.STRAP_MSI_ENABLE='1' Quite a few BIOS writers misinterpret this sentence and think that enabling MSI is an optional feature. However, clearing that bit just prevents delivery of MSI messages but does not remove the MSI PCI capabilities registers, and so leaves these devices unusable for any driver that attempts to use MSI. Setting that bit is not possible after the BIOS has locked down the configuration registers, so we have to manually disable MSI for the affected devices. This fixes the codec communication errors in the HDA driver when accessing the HDMI audio device, and allows us to get rid of the overcautious quirk in radeon_irq_kms.c. Signed-off-by: Clemens Ladisch Tested-by: Alex Deucher Cc: Signed-off-by: Jesse Barnes --- drivers/gpu/drm/radeon/radeon_irq_kms.c | 8 +------- drivers/pci/quirks.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+), 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 3cfd60fd0083..ea4c645ece11 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -116,13 +116,7 @@ int radeon_irq_kms_init(struct radeon_device *rdev) } /* enable msi */ rdev->msi_enabled = 0; - /* MSIs don't seem to work on my rs780; - * not sure about rs880 or other rs780s. - * Needs more investigation. - */ - if ((rdev->family >= CHIP_RV380) && - (rdev->family != CHIP_RS780) && - (rdev->family != CHIP_RS880)) { + if (rdev->family >= CHIP_RV380) { int ret = pci_enable_msi(rdev->pdev); if (!ret) { rdev->msi_enabled = 1; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 8284958fc530..bb5b46abc996 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2493,6 +2493,39 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, quirk_msi_intx_disable_bug); +/* + * MSI does not work with the AMD RS780/RS880 internal graphics and HDMI audio + * devices unless the BIOS has initialized the nb_cntl.strap_msi_enable bit. + */ +static void __init rs780_int_gfx_disable_msi(struct pci_dev *int_gfx_bridge) +{ + u32 nb_cntl; + + if (!int_gfx_bridge->subordinate) + return; + + pci_bus_write_config_dword(int_gfx_bridge->bus, PCI_DEVFN(0, 0), + 0x60, 0); + pci_bus_read_config_dword(int_gfx_bridge->bus, PCI_DEVFN(0, 0), + 0x64, &nb_cntl); + + if (!(nb_cntl & BIT(10))) { + dev_warn(&int_gfx_bridge->dev, + FW_WARN "RS780: MSI for internal graphics disabled\n"); + int_gfx_bridge->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; + } +} + +#define PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX 0x9602 + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX, + rs780_int_gfx_disable_msi); +/* wrong vendor ID on M4A785TD motherboard: */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASUSTEK, + PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX, + rs780_int_gfx_disable_msi); + #endif /* CONFIG_PCI_MSI */ #ifdef CONFIG_PCI_IOV -- cgit v1.2.3 From 134b345081534235dbf228b1005c14590e0570ba Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 24 Mar 2010 07:11:01 -0600 Subject: PCI quirk: Disable MSI on VIA K8T890 systems Bugzilla 15287 indicates that there's a problem with Message Signalled Interrupts on VIA K8T890 systems. Add a quirk to disable MSI on these systems. Signed-off-by: Matthew Wilcox Tested-by: Jan Kreuzer Tested-by: lh Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bb5b46abc996..f6bbb9c89e3d 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2122,6 +2122,7 @@ static void __devinit quirk_disable_msi(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); /* Go through the list of Hypertransport capabilities and * return 1 if a HT MSI capability is found and enabled */ -- cgit v1.2.3 From f967a44343e407811898ddac97abc69b293e9810 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 22 Mar 2010 16:34:05 -0600 Subject: PCI: don't say we claimed a resource if we failed pci_claim_resource() can fail, so pay attention and only claim success when it actually succeeded. If pci_claim_resource() fails, it prints a useful diagnostic. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f6bbb9c89e3d..3ea0b29c0104 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -368,8 +368,9 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, bus_region.end = res->end; pcibios_bus_to_resource(dev, res, &bus_region); - pci_claim_resource(dev, nr); - dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name); + if (pci_claim_resource(dev, nr) == 0) + dev_info(&dev->dev, "quirk: %pR claimed by %s\n", + res, name); } } -- cgit v1.2.3