From 0b56e9a7e8358e59b21d8a425e463072bfae523c Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Thu, 11 May 2017 12:17:42 +0530 Subject: phy: Group vendor specific phy drivers Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam Acked-by: Heiko Stuebner Acked-by: Viresh Kumar Acked-by: Krzysztof Kozlowski Acked-by: Yoshihiro Shimoda Reviewed-by: Jaehoon Chung Cc: Kishon Vijay Abraham I Cc: David S. Miller Cc: Geert Uytterhoeven Cc: Yoshihiro Shimoda Cc: Guenter Roeck Cc: Heiko Stuebner Cc: Viresh Kumar Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Sylwester Nawrocki Cc: Krzysztof Kozlowski Cc: Jaehoon Chung Cc: Stephen Boyd Cc: Martin Blumenstingl Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/qualcomm/phy-qcom-usb-hs.c | 295 +++++++++++++++++++++++++++++++++ 1 file changed, 295 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs.c (limited to 'drivers/phy/qualcomm/phy-qcom-usb-hs.c') diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c new file mode 100644 index 000000000000..4b20abc3ae2f --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c @@ -0,0 +1,295 @@ +/** + * Copyright (C) 2016 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ULPI_PWR_CLK_MNG_REG 0x88 +# define ULPI_PWR_OTG_COMP_DISABLE BIT(0) + +#define ULPI_MISC_A 0x96 +# define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) +# define ULPI_MISC_A_VBUSVLDEXT BIT(0) + + +struct ulpi_seq { + u8 addr; + u8 val; +}; + +struct qcom_usb_hs_phy { + struct ulpi *ulpi; + struct phy *phy; + struct clk *ref_clk; + struct clk *sleep_clk; + struct regulator *v1p8; + struct regulator *v3p3; + struct reset_control *reset; + struct ulpi_seq *init_seq; + struct extcon_dev *vbus_edev; + struct notifier_block vbus_notify; +}; + +static int qcom_usb_hs_phy_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); + u8 addr; + int ret; + + if (!uphy->vbus_edev) { + u8 val = 0; + + switch (mode) { + case PHY_MODE_USB_OTG: + case PHY_MODE_USB_HOST: + val |= ULPI_INT_IDGRD; + case PHY_MODE_USB_DEVICE: + val |= ULPI_INT_SESS_VALID; + default: + break; + } + + ret = ulpi_write(uphy->ulpi, ULPI_USB_INT_EN_RISE, val); + if (ret) + return ret; + ret = ulpi_write(uphy->ulpi, ULPI_USB_INT_EN_FALL, val); + } else { + switch (mode) { + case PHY_MODE_USB_OTG: + case PHY_MODE_USB_DEVICE: + addr = ULPI_SET(ULPI_MISC_A); + break; + case PHY_MODE_USB_HOST: + addr = ULPI_CLR(ULPI_MISC_A); + break; + default: + return -EINVAL; + } + + ret = ulpi_write(uphy->ulpi, ULPI_SET(ULPI_PWR_CLK_MNG_REG), + ULPI_PWR_OTG_COMP_DISABLE); + if (ret) + return ret; + ret = ulpi_write(uphy->ulpi, addr, ULPI_MISC_A_VBUSVLDEXTSEL); + } + + return ret; +} + +static int +qcom_usb_hs_phy_vbus_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct qcom_usb_hs_phy *uphy; + u8 addr; + + uphy = container_of(nb, struct qcom_usb_hs_phy, vbus_notify); + + if (event) + addr = ULPI_SET(ULPI_MISC_A); + else + addr = ULPI_CLR(ULPI_MISC_A); + + return ulpi_write(uphy->ulpi, addr, ULPI_MISC_A_VBUSVLDEXT); +} + +static int qcom_usb_hs_phy_power_on(struct phy *phy) +{ + struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); + struct ulpi *ulpi = uphy->ulpi; + const struct ulpi_seq *seq; + int ret, state; + + ret = clk_prepare_enable(uphy->ref_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(uphy->sleep_clk); + if (ret) + goto err_sleep; + + ret = regulator_set_load(uphy->v1p8, 50000); + if (ret < 0) + goto err_1p8; + + ret = regulator_enable(uphy->v1p8); + if (ret) + goto err_1p8; + + ret = regulator_set_voltage_triplet(uphy->v3p3, 3050000, 3300000, + 3300000); + if (ret) + goto err_3p3; + + ret = regulator_set_load(uphy->v3p3, 50000); + if (ret < 0) + goto err_3p3; + + ret = regulator_enable(uphy->v3p3); + if (ret) + goto err_3p3; + + for (seq = uphy->init_seq; seq->addr; seq++) { + ret = ulpi_write(ulpi, ULPI_EXT_VENDOR_SPECIFIC + seq->addr, + seq->val); + if (ret) + goto err_ulpi; + } + + if (uphy->reset) { + ret = reset_control_reset(uphy->reset); + if (ret) + goto err_ulpi; + } + + if (uphy->vbus_edev) { + state = extcon_get_cable_state_(uphy->vbus_edev, EXTCON_USB); + /* setup initial state */ + qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state, + uphy->vbus_edev); + ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB, + &uphy->vbus_notify); + if (ret) + goto err_ulpi; + } + + return 0; +err_ulpi: + regulator_disable(uphy->v3p3); +err_3p3: + regulator_disable(uphy->v1p8); +err_1p8: + clk_disable_unprepare(uphy->sleep_clk); +err_sleep: + clk_disable_unprepare(uphy->ref_clk); + return ret; +} + +static int qcom_usb_hs_phy_power_off(struct phy *phy) +{ + int ret; + struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); + + if (uphy->vbus_edev) { + ret = extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB, + &uphy->vbus_notify); + if (ret) + return ret; + } + + regulator_disable(uphy->v3p3); + regulator_disable(uphy->v1p8); + clk_disable_unprepare(uphy->sleep_clk); + clk_disable_unprepare(uphy->ref_clk); + + return 0; +} + +static const struct phy_ops qcom_usb_hs_phy_ops = { + .power_on = qcom_usb_hs_phy_power_on, + .power_off = qcom_usb_hs_phy_power_off, + .set_mode = qcom_usb_hs_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int qcom_usb_hs_phy_probe(struct ulpi *ulpi) +{ + struct qcom_usb_hs_phy *uphy; + struct phy_provider *p; + struct clk *clk; + struct regulator *reg; + struct reset_control *reset; + int size; + int ret; + + uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL); + if (!uphy) + return -ENOMEM; + ulpi_set_drvdata(ulpi, uphy); + uphy->ulpi = ulpi; + + size = of_property_count_u8_elems(ulpi->dev.of_node, "qcom,init-seq"); + if (size < 0) + size = 0; + uphy->init_seq = devm_kmalloc_array(&ulpi->dev, (size / 2) + 1, + sizeof(*uphy->init_seq), GFP_KERNEL); + if (!uphy->init_seq) + return -ENOMEM; + ret = of_property_read_u8_array(ulpi->dev.of_node, "qcom,init-seq", + (u8 *)uphy->init_seq, size); + if (ret && size) + return ret; + /* NUL terminate */ + uphy->init_seq[size / 2].addr = uphy->init_seq[size / 2].val = 0; + + uphy->ref_clk = clk = devm_clk_get(&ulpi->dev, "ref"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->sleep_clk = clk = devm_clk_get(&ulpi->dev, "sleep"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->v1p8 = reg = devm_regulator_get(&ulpi->dev, "v1p8"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + uphy->v3p3 = reg = devm_regulator_get(&ulpi->dev, "v3p3"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + uphy->reset = reset = devm_reset_control_get(&ulpi->dev, "por"); + if (IS_ERR(reset)) { + if (PTR_ERR(reset) == -EPROBE_DEFER) + return PTR_ERR(reset); + uphy->reset = NULL; + } + + uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node, + &qcom_usb_hs_phy_ops); + if (IS_ERR(uphy->phy)) + return PTR_ERR(uphy->phy); + + uphy->vbus_edev = extcon_get_edev_by_phandle(&ulpi->dev, 0); + if (IS_ERR(uphy->vbus_edev)) { + if (PTR_ERR(uphy->vbus_edev) != -ENODEV) + return PTR_ERR(uphy->vbus_edev); + uphy->vbus_edev = NULL; + } + + uphy->vbus_notify.notifier_call = qcom_usb_hs_phy_vbus_notifier; + phy_set_drvdata(uphy->phy, uphy); + + p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(p); +} + +static const struct of_device_id qcom_usb_hs_phy_match[] = { + { .compatible = "qcom,usb-hs-phy", }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_usb_hs_phy_match); + +static struct ulpi_driver qcom_usb_hs_phy_driver = { + .probe = qcom_usb_hs_phy_probe, + .driver = { + .name = "qcom_usb_hs_phy", + .of_match_table = qcom_usb_hs_phy_match, + }, +}; +module_ulpi_driver(qcom_usb_hs_phy_driver); + +MODULE_DESCRIPTION("Qualcomm USB HS phy"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3