From a7aaa80098d5b7608b2dc1e883e3c3f929415243 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 28 Nov 2022 10:28:48 +0100 Subject: power: supply: bq25890: Ensure pump_express_work is cancelled on remove The pump_express_work which gets queued from an external_power_changed callback might be pending / running on remove() (or on probe failure). Add a devm action cancelling the work, to ensure that it is cancelled. Note the devm action is added before devm_power_supply_register(), making it run after devm unregisters the power_supply, so that the work cannot be queued anymore (this is also why a devm action is used for this). Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol") Reviewed-by: Marek Vasut Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel --- drivers/power/supply/bq25890_charger.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/power/supply') diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index 512c81662eea..866c475bb735 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -1317,6 +1317,13 @@ static int bq25890_fw_probe(struct bq25890_device *bq) return 0; } +static void bq25890_non_devm_cleanup(void *data) +{ + struct bq25890_device *bq = data; + + cancel_delayed_work_sync(&bq->pump_express_work); +} + static int bq25890_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -1372,6 +1379,14 @@ static int bq25890_probe(struct i2c_client *client) /* OTG reporting */ bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + /* + * This must be before bq25890_power_supply_init(), so that it runs + * after devm unregisters the power_supply. + */ + ret = devm_add_action_or_reset(dev, bq25890_non_devm_cleanup, bq); + if (ret) + return ret; + ret = bq25890_register_regulator(bq); if (ret) return ret; -- cgit v1.2.3