From af66b3c0934e350059646651958306565313e145 Mon Sep 17 00:00:00 2001 From: Milo Kim Date: Fri, 6 Dec 2013 11:18:43 +0900 Subject: pwm: Add LP3943 PWM driver This is the other of the LP3943 MFD driver. LP3943 can be used as a PWM generator, up to 2 channels. * Two PWM generators supported * Supported PWM operations request, free, config, enable and disable * Pin assignment A driver data, 'pin_used' is checked when a PWM is requested. If the output pin is already assigned, then returns as failure. If the pin is available, 'pin_used' is set. When the PWM is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim Acked-by: Thierry Reding Signed-off-by: Lee Jones --- drivers/pwm/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/pwm/Kconfig') diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index eece329d7872..7acab93d5a47 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -90,6 +90,16 @@ config PWM_JZ4740 To compile this driver as a module, choose M here: the module will be called pwm-jz4740. +config PWM_LP3943 + tristate "TI/National Semiconductor LP3943 PWM support" + depends on MFD_LP3943 + help + Generic PWM framework driver for LP3943 which supports two PWM + channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-lp3943. + config PWM_LPC32XX tristate "LPC32XX PWM support" depends on ARCH_LPC32XX -- cgit v1.2.3