From 6580fd173070a3a494d94b40d7ca5e5a815fe29a Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 7 Jun 2019 17:44:09 +0200 Subject: pwm: jz4740: Force TCU2 channels to return to their init level When the PWM mode of TCU2 channels is disabled, their corresponding pin does not always return to its initial level. Force this by using a small trick: we set duty > period, which is an invalid configuration for the hardware, which then correctly resets the pin to the initial level. Signed-off-by: Paul Cercueil Signed-off-by: Thierry Reding --- drivers/pwm/pwm-jz4740.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c index e73ee72df09d..2e4ecc061dd2 100644 --- a/drivers/pwm/pwm-jz4740.c +++ b/drivers/pwm/pwm-jz4740.c @@ -72,7 +72,15 @@ static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm); - /* Disable PWM output. + /* + * Set duty > period. This trick allows the TCU channels in TCU2 mode to + * properly return to their init level. + */ + jz4740_timer_set_duty(pwm->hwpwm, 0xffff); + jz4740_timer_set_period(pwm->hwpwm, 0x0); + + /* + * Disable PWM output. * In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the * counter is stopped, while in TCU1 mode the order does not matter. */ -- cgit v1.2.3