From eb66dc60be5a72bc940458a5adfd400e4d810d49 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Mon, 12 Nov 2007 10:30:58 -0800
Subject: [SCSI] qla2xxx: Correct NPIV support for recent ISPs.

Firmware will export to software the maximum number of vports
supported for any given firmware version and ISP type.  Use this
information rather than the current hardcoding of limitations
within the driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_init.c')

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 191dafd89be0..03444d6e4d26 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -922,9 +922,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
 					ha->flags.npiv_supported = 1;
 					if ((!ha->max_npiv_vports) ||
 					    ((ha->max_npiv_vports + 1) %
-					    MAX_MULTI_ID_FABRIC))
+					    MIN_MULTI_ID_FABRIC))
 						ha->max_npiv_vports =
-						    MAX_NUM_VPORT_FABRIC;
+						    MIN_MULTI_ID_FABRIC - 1;
 				}
 
 				if (ql2xallocfwdump)
@@ -1162,7 +1162,8 @@ qla2x00_init_rings(scsi_qla_host_t *ha)
 
 	DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no));
 
-	mid_init_cb->count = ha->max_npiv_vports;
+	mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+	mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
 
 	rval = qla2x00_init_firmware(ha, ha->init_cb_size);
 	if (rval) {
@@ -2566,14 +2567,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
 
 		/* Bypass virtual ports of the same host. */
 		if (pha->num_vhosts) {
-			vp_index = find_next_bit(
-			    (unsigned long *)pha->vp_idx_map,
-			    MAX_MULTI_ID_FABRIC + 1, 1);
-
-			for (;vp_index <= MAX_MULTI_ID_FABRIC;
-			    vp_index = find_next_bit(
-			    (unsigned long *)pha->vp_idx_map,
-			    MAX_MULTI_ID_FABRIC + 1, vp_index + 1)) {
+			for_each_mapped_vp_idx(pha, vp_index) {
 				empty_vp_index = 1;
 				found_vp = 0;
 				list_for_each_entry(vha, &pha->vp_list,
@@ -2592,7 +2586,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
 				    new_fcport->d_id.b24 == vha->d_id.b24)
 					break;
 			}
-			if (vp_index <= MAX_MULTI_ID_FABRIC)
+
+			if (vp_index <= pha->max_npiv_vports)
 				continue;
 		}
 
-- 
cgit v1.2.3


From 00b6bd25166e2a4bad23c614c10c55993bb2489e Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 17 Jan 2008 09:02:16 -0800
Subject: [SCSI] qla2xxx: Trace-Control naming cleanups.

In preparation for FCE (Fibre Channel Event) tracing support.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_def.h  |  3 ---
 drivers/scsi/qla2xxx/qla_fw.h   |  7 ++++++
 drivers/scsi/qla2xxx/qla_gbl.h  |  4 +++-
 drivers/scsi/qla2xxx/qla_init.c |  5 ++---
 drivers/scsi/qla2xxx/qla_mbx.c  | 49 +++++++++++++++++++++++++++++++----------
 drivers/scsi/qla2xxx/qla_os.c   |  2 +-
 6 files changed, 50 insertions(+), 20 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_init.c')

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 144f6d04f3d1..3f934bdce6ae 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -623,9 +623,6 @@ typedef struct {
 #define MBC_GET_LINK_PRIV_STATS		0x6d	/* Get link & private data. */
 #define MBC_SET_VENDOR_ID		0x76	/* Set Vendor ID. */
 
-#define TC_ENABLE			4
-#define TC_DISABLE			5
-
 /* Firmware return data sizes */
 #define FCAL_MAP_SIZE	128
 
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 69a5e31dd93a..ef14bcde712a 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -952,6 +952,13 @@ struct device_reg_24xx {
 	uint32_t iobase_sdata;
 };
 
+/* Trace Control *************************************************************/
+
+#define TC_AEN_DISABLE		0
+
+#define TC_EFT_ENABLE		4
+#define TC_EFT_DISABLE		5
+
 /* MID Support ***************************************************************/
 
 #define MIN_MULTI_ID_FABRIC	64	/* Must be power-of-2. */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index fd7553920e00..2fd31fdafcc9 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -228,7 +228,9 @@ extern int
 qla2x00_stop_firmware(scsi_qla_host_t *);
 
 extern int
-qla2x00_trace_control(scsi_qla_host_t *, uint16_t, dma_addr_t, uint16_t);
+qla2x00_enable_eft_trace(scsi_qla_host_t *, dma_addr_t, uint16_t);
+extern int
+qla2x00_disable_eft_trace(scsi_qla_host_t *);
 
 extern int
 qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 03444d6e4d26..da2cce011520 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -766,8 +766,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 			goto cont_alloc;
 		}
 
-		rval = qla2x00_trace_control(ha, TC_ENABLE, eft_dma,
-		    EFT_NUM_BUFFERS);
+		rval = qla2x00_enable_eft_trace(ha, eft_dma, EFT_NUM_BUFFERS);
 		if (rval) {
 			qla_printk(KERN_WARNING, ha, "Unable to initialize "
 			    "EFT (%d).\n", rval);
@@ -3240,7 +3239,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 			clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
 
 			if (ha->eft) {
-				rval = qla2x00_trace_control(ha, TC_ENABLE,
+				rval = qla2x00_enable_eft_trace(ha,
 				    ha->eft_dma, EFT_NUM_BUFFERS);
 				if (rval) {
 					qla_printk(KERN_WARNING, ha,
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index ee7899d31e18..7c6aa4ec8f4f 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2350,7 +2350,7 @@ qla2x00_stop_firmware(scsi_qla_host_t *ha)
 }
 
 int
-qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma,
+qla2x00_enable_eft_trace(scsi_qla_host_t *ha, dma_addr_t eft_dma,
     uint16_t buffers)
 {
 	int rval;
@@ -2363,22 +2363,47 @@ qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma,
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;
-	mcp->mb[1] = ctrl;
-	mcp->out_mb = MBX_1|MBX_0;
+	mcp->mb[1] = TC_EFT_ENABLE;
+	mcp->mb[2] = LSW(eft_dma);
+	mcp->mb[3] = MSW(eft_dma);
+	mcp->mb[4] = LSW(MSD(eft_dma));
+	mcp->mb[5] = MSW(MSD(eft_dma));
+	mcp->mb[6] = buffers;
+	mcp->mb[7] = TC_AEN_DISABLE;
+	mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_1|MBX_0;
-	if (ctrl == TC_ENABLE) {
-		mcp->mb[2] = LSW(eft_dma);
-		mcp->mb[3] = MSW(eft_dma);
-		mcp->mb[4] = LSW(MSD(eft_dma));
-		mcp->mb[5] = MSW(MSD(eft_dma));
-		mcp->mb[6] = buffers;
-		mcp->mb[7] = 0;
-		mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2;
-	}
 	mcp->tov = 30;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(ha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
+		    __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+	}
+
+	return rval;
+}
 
+int
+qla2x00_disable_eft_trace(scsi_qla_host_t *ha)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(ha))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+	mcp->mb[0] = MBC_TRACE_CONTROL;
+	mcp->mb[1] = TC_EFT_DISABLE;
+	mcp->out_mb = MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(ha, mcp);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
 		    __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 23ee05913fc5..63938d74a571 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1856,7 +1856,7 @@ qla2x00_free_device(scsi_qla_host_t *ha)
 	}
 
 	if (ha->eft)
-		qla2x00_trace_control(ha, TC_DISABLE, 0, 0);
+		qla2x00_disable_eft_trace(ha);
 
 	ha->flags.online = 0;
 
-- 
cgit v1.2.3


From df613b96077cee826b14089ae6e75eeabf71faa3 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 17 Jan 2008 09:02:17 -0800
Subject: [SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support.

FCE support enables the firmware to record FC extended link
services and basic link services frames which have been
transmitted and received by the ISP.  This allows for a limited
view of the FC traffic through the ISP without using a FC
analyzer.  This can be useful in situations where a physical
connection to the FC bus is not possible.

The driver exports this information in two ways -- first, via a
debugfs node exported for all supported ISPs under:

	<debugfs_mount_point>/qla2xxx/qla2xxx_<host_no>/fce

where a read of the 'fce' file will provide a snapshot of the
firmware's FCE buffer; and finally, the FCE buffer will be
extracted during a firmware-dump scenario.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/Makefile   |   2 +-
 drivers/scsi/qla2xxx/qla_dbg.c  |  22 +++++
 drivers/scsi/qla2xxx/qla_dbg.h  |  19 +++++
 drivers/scsi/qla2xxx/qla_def.h  |  10 +++
 drivers/scsi/qla2xxx/qla_dfs.c  | 175 ++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_fw.h   |   7 ++
 drivers/scsi/qla2xxx/qla_gbl.h  |  13 +++
 drivers/scsi/qla2xxx/qla_init.c |  73 ++++++++++++++---
 drivers/scsi/qla2xxx/qla_mbx.c  |  87 ++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_os.c   |  11 +++
 10 files changed, 405 insertions(+), 14 deletions(-)
 create mode 100644 drivers/scsi/qla2xxx/qla_dfs.c

(limited to 'drivers/scsi/qla2xxx/qla_init.c')

diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile
index 71ddb5db4944..c51fd1f86639 100644
--- a/drivers/scsi/qla2xxx/Makefile
+++ b/drivers/scsi/qla2xxx/Makefile
@@ -1,4 +1,4 @@
 qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \
-		qla_dbg.o qla_sup.o qla_attr.o qla_mid.o
+		qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o
 
 obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 796c4ce87831..d88e98c476b0 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1051,6 +1051,7 @@ qla25xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked)
 	struct qla25xx_fw_dump *fw;
 	uint32_t	ext_mem_cnt;
 	void		*nxt;
+	struct qla2xxx_fce_chain *fcec;
 
 	risc_address = ext_mem_cnt = 0;
 	flags = 0;
@@ -1321,10 +1322,31 @@ qla25xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked)
 	if (rval != QLA_SUCCESS)
 		goto qla25xx_fw_dump_failed_0;
 
+	/* Fibre Channel Trace Buffer. */
 	nxt = qla2xxx_copy_queues(ha, nxt);
 	if (ha->eft)
 		memcpy(nxt, ha->eft, ntohl(ha->fw_dump->eft_size));
 
+	/* Fibre Channel Event Buffer. */
+	if (!ha->fce)
+		goto qla25xx_fw_dump_failed_0;
+
+	ha->fw_dump->version |= __constant_htonl(DUMP_CHAIN_VARIANT);
+
+	fcec = nxt + ntohl(ha->fw_dump->eft_size);
+	fcec->type = __constant_htonl(DUMP_CHAIN_FCE | DUMP_CHAIN_LAST);
+	fcec->chain_size = htonl(sizeof(struct qla2xxx_fce_chain) +
+	    fce_calc_size(ha->fce_bufs));
+	fcec->size = htonl(fce_calc_size(ha->fce_bufs));
+	fcec->addr_l = htonl(LSD(ha->fce_dma));
+	fcec->addr_h = htonl(MSD(ha->fce_dma));
+
+	iter_reg = fcec->eregs;
+	for (cnt = 0; cnt < 8; cnt++)
+		*iter_reg++ = htonl(ha->fce_mb[cnt]);
+
+	memcpy(iter_reg, ha->fce, ntohl(fcec->size));
+
 qla25xx_fw_dump_failed_0:
 	if (rval != QLA_SUCCESS) {
 		qla_printk(KERN_WARNING, ha,
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index a50ecf0b7c84..524598afc81c 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -256,6 +256,25 @@ struct qla25xx_fw_dump {
 #define EFT_BYTES_PER_BUFFER	0x4000
 #define EFT_SIZE		((EFT_BYTES_PER_BUFFER) * (EFT_NUM_BUFFERS))
 
+#define FCE_NUM_BUFFERS		64
+#define FCE_BYTES_PER_BUFFER	0x400
+#define FCE_SIZE		((FCE_BYTES_PER_BUFFER) * (FCE_NUM_BUFFERS))
+#define fce_calc_size(b)	((FCE_BYTES_PER_BUFFER) * (b))
+
+struct qla2xxx_fce_chain {
+	uint32_t type;
+	uint32_t chain_size;
+
+	uint32_t size;
+	uint32_t addr_l;
+	uint32_t addr_h;
+	uint32_t eregs[8];
+};
+
+#define DUMP_CHAIN_VARIANT	0x80000000
+#define DUMP_CHAIN_FCE		0x7FFFFAF0
+#define DUMP_CHAIN_LAST		0x80000000
+
 struct qla2xxx_fw_dump {
 	uint8_t signature[4];
 	uint32_t version;
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 3f934bdce6ae..6f129da37589 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2156,6 +2156,7 @@ typedef struct scsi_qla_host {
 		uint32_t	gpsc_supported		:1;
 		uint32_t        vsan_enabled            :1;
 		uint32_t	npiv_supported		:1;
+		uint32_t	fce_enabled		:1;
 	} flags;
 
 	atomic_t	loop_state;
@@ -2449,6 +2450,15 @@ typedef struct scsi_qla_host {
 	dma_addr_t	eft_dma;
 	void		*eft;
 
+	struct dentry *dfs_dir;
+	struct dentry *dfs_fce;
+	dma_addr_t	fce_dma;
+	void		*fce;
+	uint32_t	fce_bufs;
+	uint16_t	fce_mb[8];
+	uint64_t	fce_wr, fce_rd;
+	struct mutex	fce_mutex;
+
 	uint8_t		host_str[16];
 	uint32_t	pci_attr;
 	uint16_t	chip_revision;
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
new file mode 100644
index 000000000000..1479c60441c8
--- /dev/null
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -0,0 +1,175 @@
+/*
+ * QLogic Fibre Channel HBA Driver
+ * Copyright (c)  2003-2005 QLogic Corporation
+ *
+ * See LICENSE.qla2xxx for copyright and licensing details.
+ */
+#include "qla_def.h"
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *qla2x00_dfs_root;
+static atomic_t qla2x00_dfs_root_count;
+
+static int
+qla2x00_dfs_fce_show(struct seq_file *s, void *unused)
+{
+	scsi_qla_host_t *ha = s->private;
+	uint32_t cnt;
+	uint32_t *fce;
+	uint64_t fce_start;
+
+	mutex_lock(&ha->fce_mutex);
+
+	seq_printf(s, "FCE Trace Buffer\n");
+	seq_printf(s, "In Pointer = %llx\n\n", ha->fce_wr);
+	seq_printf(s, "Base = %llx\n\n", (unsigned long long) ha->fce_dma);
+	seq_printf(s, "FCE Enable Registers\n");
+	seq_printf(s, "%08x %08x %08x %08x %08x %08x\n",
+	    ha->fce_mb[0], ha->fce_mb[2], ha->fce_mb[3], ha->fce_mb[4],
+	    ha->fce_mb[5], ha->fce_mb[6]);
+
+	fce = (uint32_t *) ha->fce;
+	fce_start = (unsigned long long) ha->fce_dma;
+	for (cnt = 0; cnt < fce_calc_size(ha->fce_bufs) / 4; cnt++) {
+		if (cnt % 8 == 0)
+			seq_printf(s, "\n%llx: ",
+			    (unsigned long long)((cnt * 4) + fce_start));
+		else
+			seq_printf(s, " ");
+		seq_printf(s, "%08x", *fce++);
+	}
+
+	seq_printf(s, "\nEnd\n");
+
+	mutex_unlock(&ha->fce_mutex);
+
+	return 0;
+}
+
+static int
+qla2x00_dfs_fce_open(struct inode *inode, struct file *file)
+{
+	scsi_qla_host_t *ha = inode->i_private;
+	int rval;
+
+	if (!ha->flags.fce_enabled)
+		goto out;
+
+	mutex_lock(&ha->fce_mutex);
+
+	/* Pause tracing to flush FCE buffers. */
+	rval = qla2x00_disable_fce_trace(ha, &ha->fce_wr, &ha->fce_rd);
+	if (rval)
+		qla_printk(KERN_WARNING, ha,
+		    "DebugFS: Unable to disable FCE (%d).\n", rval);
+
+	ha->flags.fce_enabled = 0;
+
+	mutex_unlock(&ha->fce_mutex);
+out:
+	return single_open(file, qla2x00_dfs_fce_show, ha);
+}
+
+static int
+qla2x00_dfs_fce_release(struct inode *inode, struct file *file)
+{
+	scsi_qla_host_t *ha = inode->i_private;
+	int rval;
+
+	if (ha->flags.fce_enabled)
+		goto out;
+
+	mutex_lock(&ha->fce_mutex);
+
+	/* Re-enable FCE tracing. */
+	ha->flags.fce_enabled = 1;
+	memset(ha->fce, 0, fce_calc_size(ha->fce_bufs));
+	rval = qla2x00_enable_fce_trace(ha, ha->fce_dma, ha->fce_bufs,
+	    ha->fce_mb, &ha->fce_bufs);
+	if (rval) {
+		qla_printk(KERN_WARNING, ha,
+		    "DebugFS: Unable to reinitialize FCE (%d).\n", rval);
+		ha->flags.fce_enabled = 0;
+	}
+
+	mutex_unlock(&ha->fce_mutex);
+out:
+	return single_release(inode, file);
+}
+
+static const struct file_operations dfs_fce_ops = {
+	.open		= qla2x00_dfs_fce_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= qla2x00_dfs_fce_release,
+};
+
+int
+qla2x00_dfs_setup(scsi_qla_host_t *ha)
+{
+	if (!IS_QLA25XX(ha))
+		goto out;
+	if (!ha->fce)
+		goto out;
+
+	if (qla2x00_dfs_root)
+		goto create_dir;
+
+	atomic_set(&qla2x00_dfs_root_count, 0);
+	qla2x00_dfs_root = debugfs_create_dir(QLA2XXX_DRIVER_NAME, NULL);
+	if (!qla2x00_dfs_root) {
+		qla_printk(KERN_NOTICE, ha,
+		    "DebugFS: Unable to create root directory.\n");
+		goto out;
+	}
+
+create_dir:
+	if (ha->dfs_dir)
+		goto create_nodes;
+
+	mutex_init(&ha->fce_mutex);
+	ha->dfs_dir = debugfs_create_dir(ha->host_str, qla2x00_dfs_root);
+	if (!ha->dfs_dir) {
+		qla_printk(KERN_NOTICE, ha,
+		    "DebugFS: Unable to create ha directory.\n");
+		goto out;
+	}
+
+	atomic_inc(&qla2x00_dfs_root_count);
+
+create_nodes:
+	ha->dfs_fce = debugfs_create_file("fce", S_IRUSR, ha->dfs_dir, ha,
+	    &dfs_fce_ops);
+	if (!ha->dfs_fce) {
+		qla_printk(KERN_NOTICE, ha,
+		    "DebugFS: Unable to fce node.\n");
+		goto out;
+	}
+out:
+	return 0;
+}
+
+int
+qla2x00_dfs_remove(scsi_qla_host_t *ha)
+{
+	if (ha->dfs_fce) {
+		debugfs_remove(ha->dfs_fce);
+		ha->dfs_fce = NULL;
+	}
+
+	if (ha->dfs_dir) {
+		debugfs_remove(ha->dfs_dir);
+		ha->dfs_dir = NULL;
+		atomic_dec(&qla2x00_dfs_root_count);
+	}
+
+	if (atomic_read(&qla2x00_dfs_root_count) == 0 &&
+	    qla2x00_dfs_root) {
+		debugfs_remove(qla2x00_dfs_root);
+		qla2x00_dfs_root = NULL;
+	}
+
+	return 0;
+}
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index ef14bcde712a..9337e138ed63 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -959,6 +959,13 @@ struct device_reg_24xx {
 #define TC_EFT_ENABLE		4
 #define TC_EFT_DISABLE		5
 
+#define TC_FCE_ENABLE		8
+#define TC_FCE_OPTIONS		0
+#define TC_FCE_DEFAULT_RX_SIZE	2112
+#define TC_FCE_DEFAULT_TX_SIZE	2112
+#define TC_FCE_DISABLE		9
+#define TC_FCE_DISABLE_TRACE	BIT_0
+
 /* MID Support ***************************************************************/
 
 #define MIN_MULTI_ID_FABRIC	64	/* Must be power-of-2. */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 2fd31fdafcc9..ba35fc26ce6b 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -232,6 +232,13 @@ qla2x00_enable_eft_trace(scsi_qla_host_t *, dma_addr_t, uint16_t);
 extern int
 qla2x00_disable_eft_trace(scsi_qla_host_t *);
 
+extern int
+qla2x00_enable_fce_trace(scsi_qla_host_t *, dma_addr_t, uint16_t , uint16_t *,
+    uint32_t *);
+
+extern int
+qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *);
+
 extern int
 qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
 
@@ -334,4 +341,10 @@ extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *);
 extern void qla2x00_init_host_attr(scsi_qla_host_t *);
 extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
 extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *);
+
+/*
+ * Global Function Prototypes in qla_dfs.c source file.
+ */
+extern int qla2x00_dfs_setup(scsi_qla_host_t *);
+extern int qla2x00_dfs_remove(scsi_qla_host_t *);
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index da2cce011520..cacfd2509387 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -732,9 +732,9 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 {
 	int rval;
 	uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size,
-	    eft_size;
-	dma_addr_t eft_dma;
-	void *eft;
+	    eft_size, fce_size;
+	dma_addr_t tc_dma;
+	void *tc;
 
 	if (ha->fw_dump) {
 		qla_printk(KERN_WARNING, ha,
@@ -743,7 +743,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 	}
 
 	ha->fw_dumped = 0;
-	fixed_size = mem_size = eft_size = 0;
+	fixed_size = mem_size = eft_size = fce_size = 0;
 	if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
 		fixed_size = sizeof(struct qla2100_fw_dump);
 	} else if (IS_QLA23XX(ha)) {
@@ -758,20 +758,20 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		    sizeof(uint32_t);
 
 		/* Allocate memory for Extended Trace Buffer. */
-		eft = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &eft_dma,
+		tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
 		    GFP_KERNEL);
-		if (!eft) {
+		if (!tc) {
 			qla_printk(KERN_WARNING, ha, "Unable to allocate "
 			    "(%d KB) for EFT.\n", EFT_SIZE / 1024);
 			goto cont_alloc;
 		}
 
-		rval = qla2x00_enable_eft_trace(ha, eft_dma, EFT_NUM_BUFFERS);
+		rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
 		if (rval) {
 			qla_printk(KERN_WARNING, ha, "Unable to initialize "
 			    "EFT (%d).\n", rval);
-			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, eft,
-			    eft_dma);
+			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
+			    tc_dma);
 			goto cont_alloc;
 		}
 
@@ -779,9 +779,41 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		    EFT_SIZE / 1024);
 
 		eft_size = EFT_SIZE;
-		memset(eft, 0, eft_size);
-		ha->eft_dma = eft_dma;
-		ha->eft = eft;
+		memset(tc, 0, eft_size);
+		ha->eft_dma = tc_dma;
+		ha->eft = tc;
+
+		/* Allocate memory for Fibre Channel Event Buffer. */
+		if (!IS_QLA25XX(ha))
+			goto cont_alloc;
+
+		tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
+		    GFP_KERNEL);
+		if (!tc) {
+			qla_printk(KERN_WARNING, ha, "Unable to allocate "
+			    "(%d KB) for FCE.\n", FCE_SIZE / 1024);
+			goto cont_alloc;
+		}
+
+		memset(tc, 0, FCE_SIZE);
+		rval = qla2x00_enable_fce_trace(ha, tc_dma, FCE_NUM_BUFFERS,
+		    ha->fce_mb, &ha->fce_bufs);
+		if (rval) {
+			qla_printk(KERN_WARNING, ha, "Unable to initialize "
+			    "FCE (%d).\n", rval);
+			dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
+			    tc_dma);
+			ha->flags.fce_enabled = 0;
+			goto cont_alloc;
+		}
+
+		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n",
+		    FCE_SIZE / 1024);
+
+		fce_size = sizeof(struct qla2xxx_fce_chain) + EFT_SIZE;
+		ha->flags.fce_enabled = 1;
+		ha->fce_dma = tc_dma;
+		ha->fce = tc;
 	}
 cont_alloc:
 	req_q_size = ha->request_q_length * sizeof(request_t);
@@ -789,7 +821,7 @@ cont_alloc:
 
 	dump_size = offsetof(struct qla2xxx_fw_dump, isp);
 	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
-	    eft_size;
+	    eft_size + fce_size;
 
 	ha->fw_dump = vmalloc(dump_size);
 	if (!ha->fw_dump) {
@@ -3247,6 +3279,21 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 					    "(%d).\n", rval);
 				}
 			}
+
+			if (ha->fce) {
+				ha->flags.fce_enabled = 1;
+				memset(ha->fce, 0,
+				    fce_calc_size(ha->fce_bufs));
+				rval = qla2x00_enable_fce_trace(ha,
+				    ha->fce_dma, ha->fce_bufs, ha->fce_mb,
+				    &ha->fce_bufs);
+				if (rval) {
+					qla_printk(KERN_WARNING, ha,
+					    "Unable to reinitialize FCE "
+					    "(%d).\n", rval);
+					ha->flags.fce_enabled = 0;
+				}
+			}
 		} else {	/* failed the ISP abort */
 			ha->flags.online = 1;
 			if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7c6aa4ec8f4f..99d29fff836d 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2414,6 +2414,93 @@ qla2x00_disable_eft_trace(scsi_qla_host_t *ha)
 	return rval;
 }
 
+int
+qla2x00_enable_fce_trace(scsi_qla_host_t *ha, dma_addr_t fce_dma,
+    uint16_t buffers, uint16_t *mb, uint32_t *dwords)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA25XX(ha))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+	mcp->mb[0] = MBC_TRACE_CONTROL;
+	mcp->mb[1] = TC_FCE_ENABLE;
+	mcp->mb[2] = LSW(fce_dma);
+	mcp->mb[3] = MSW(fce_dma);
+	mcp->mb[4] = LSW(MSD(fce_dma));
+	mcp->mb[5] = MSW(MSD(fce_dma));
+	mcp->mb[6] = buffers;
+	mcp->mb[7] = TC_AEN_DISABLE;
+	mcp->mb[8] = 0;
+	mcp->mb[9] = TC_FCE_DEFAULT_RX_SIZE;
+	mcp->mb[10] = TC_FCE_DEFAULT_TX_SIZE;
+	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|
+	    MBX_1|MBX_0;
+	mcp->in_mb = MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(ha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
+		    __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+
+		if (mb)
+			memcpy(mb, mcp->mb, 8 * sizeof(*mb));
+		if (dwords)
+			*dwords = mcp->mb[6];
+	}
+
+	return rval;
+}
+
+int
+qla2x00_disable_fce_trace(scsi_qla_host_t *ha, uint64_t *wr, uint64_t *rd)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(ha))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+	mcp->mb[0] = MBC_TRACE_CONTROL;
+	mcp->mb[1] = TC_FCE_DISABLE;
+	mcp->mb[2] = TC_FCE_DISABLE_TRACE;
+	mcp->out_mb = MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_9|MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|
+	    MBX_1|MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(ha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
+		    __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+
+		if (wr)
+			*wr = (uint64_t) mcp->mb[5] << 48 |
+			    (uint64_t) mcp->mb[4] << 32 |
+			    (uint64_t) mcp->mb[3] << 16 |
+			    (uint64_t) mcp->mb[2];
+		if (rd)
+			*rd = (uint64_t) mcp->mb[9] << 48 |
+			    (uint64_t) mcp->mb[8] << 32 |
+			    (uint64_t) mcp->mb[7] << 16 |
+			    (uint64_t) mcp->mb[6];
+	}
+
+	return rval;
+}
+
 int
 qla2x00_read_sfp(scsi_qla_host_t *ha, dma_addr_t sfp_dma, uint16_t addr,
     uint16_t off, uint16_t count)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 63938d74a571..8d1408e18efd 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1791,6 +1791,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	qla2x00_init_host_attr(ha);
 
+	qla2x00_dfs_setup(ha);
+
 	qla_printk(KERN_INFO, ha, "\n"
 	    " QLogic Fibre Channel HBA Driver: %s\n"
 	    "  QLogic %s - %s\n"
@@ -1822,6 +1824,8 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	ha = pci_get_drvdata(pdev);
 
+	qla2x00_dfs_remove(ha);
+
 	qla2x00_free_sysfs_attr(ha);
 
 	fc_remove_host(ha->host);
@@ -1855,6 +1859,9 @@ qla2x00_free_device(scsi_qla_host_t *ha)
 		kthread_stop(t);
 	}
 
+	if (ha->flags.fce_enabled)
+		qla2x00_disable_fce_trace(ha, NULL, NULL);
+
 	if (ha->eft)
 		qla2x00_disable_eft_trace(ha);
 
@@ -2212,6 +2219,10 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
 	/* free sp pool */
 	qla2x00_free_sp_pool(ha);
 
+	if (ha->fce)
+		dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce,
+		    ha->fce_dma);
+
 	if (ha->fw_dump) {
 		if (ha->eft)
 			dma_free_coherent(&ha->pdev->dev,
-- 
cgit v1.2.3


From fc44765f5a232d451fa58a04606b254ac257b429 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 17 Jan 2008 09:02:18 -0800
Subject: [SCSI] qla2xxx: Correct late-memset() of EFT buffer.

Original code would clear the buffer after the firmware had
already been initialized to use the buffer, thus potentially
and inadvertantly clearing data previously DMA'd by the
firmware.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi/qla2xxx/qla_init.c')

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index cacfd2509387..7637fa7546b5 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -766,6 +766,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 			goto cont_alloc;
 		}
 
+		memset(tc, 0, EFT_SIZE);
 		rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
 		if (rval) {
 			qla_printk(KERN_WARNING, ha, "Unable to initialize "
@@ -779,7 +780,6 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		    EFT_SIZE / 1024);
 
 		eft_size = EFT_SIZE;
-		memset(tc, 0, eft_size);
 		ha->eft_dma = tc_dma;
 		ha->eft = tc;
 
-- 
cgit v1.2.3


From c48339decceec8e011498b0fc4c7c7d8b2ea06c1 Mon Sep 17 00:00:00 2001
From: Seokmann Ju <seokmann.ju@qlogic.com>
Date: Thu, 17 Jan 2008 09:02:19 -0800
Subject: [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.

There is a case where 54xx HBA loads MID firmware as it use 24xx
firmware. In this case, the driver should issue
MBC_MID_INITIALIZE FIRMWARE even though the HBA doesn't support
NPIV.  This patch make changes in the driver so that could behave
accordingly.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 4 +++-
 drivers/scsi/qla2xxx/qla_mbx.c  | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_init.c')

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 7637fa7546b5..d0633ca894be 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1193,7 +1193,9 @@ qla2x00_init_rings(scsi_qla_host_t *ha)
 
 	DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no));
 
-	mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+	if (ha->flags.npiv_supported)
+		mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+
 	mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
 
 	rval = qla2x00_init_firmware(ha, ha->init_cb_size);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 99d29fff836d..0c10c0b0fb73 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -980,7 +980,7 @@ qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size)
 	DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
 	    ha->host_no));
 
-	if (ha->flags.npiv_supported)
+	if (ha->fw_attributes & BIT_2)
 		mcp->mb[0] = MBC_MID_INITIALIZE_FIRMWARE;
 	else
 		mcp->mb[0] = MBC_INITIALIZE_FIRMWARE;
-- 
cgit v1.2.3