From 85bb4457ef47db81afef98f97de524199e139433 Mon Sep 17 00:00:00 2001 From: Santosh Yaraganavi Date: Mon, 23 Apr 2012 18:52:11 +0530 Subject: [SCSI] ufs: Assign UTRLBAU = upper_32_ bits(UTRLD base address) UTP Transfer request list base registers UTRLBA and UTRLBAU must be assigned, lower-32 and upper-32 bits of UTRLD list physical base addresses respectively. Currently UTRLBAU is being assigned lower-32 bits of UTRLD physical base address. This will cause an issue with controllers that can support 64-bit addressing. This patch correctly assigns upper-32 bits of UTRLD physical base address to UTRLBAU. Reported-by: Rene De Jong Signed-off-by: Santosh Yaraganavi Reviewed-by: Vinayak Holikatti Signed-off-by: James Bottomley --- drivers/scsi/ufs/ufshcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/scsi/ufs/ufshcd.c') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 78be71cfc636..4e010b727818 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -1032,11 +1032,11 @@ static int ufshcd_initialize_hba(struct ufs_hba *hba) return -EIO; /* Configure UTRL and UTMRL base address registers */ - writel(hba->utrdl_dma_addr, - (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L)); writel(lower_32_bits(hba->utrdl_dma_addr), + (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L)); + writel(upper_32_bits(hba->utrdl_dma_addr), (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_H)); - writel(hba->utmrdl_dma_addr, + writel(lower_32_bits(hba->utmrdl_dma_addr), (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_L)); writel(upper_32_bits(hba->utmrdl_dma_addr), (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_H)); -- cgit v1.2.3