From ab4382d27412e7e3e7c936e8d50d8888dfac3df8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 13 Jan 2011 12:10:18 -0800 Subject: tty: move drivers/serial/ to drivers/tty/serial/ The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann Cc: Alan Cox Cc: Geert Uytterhoeven Cc: Rogier Wolff Cc: Michael H. Warfield Signed-off-by: Greg Kroah-Hartman --- drivers/serial/ioc3_serial.c | 2199 ------------------------------------------ 1 file changed, 2199 deletions(-) delete mode 100644 drivers/serial/ioc3_serial.c (limited to 'drivers/serial/ioc3_serial.c') diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c deleted file mode 100644 index ee43efc7bdcc..000000000000 --- a/drivers/serial/ioc3_serial.c +++ /dev/null @@ -1,2199 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved. - */ - -/* - * This file contains a module version of the ioc3 serial driver. This - * includes all the support functions needed (support functions, etc.) - * and the serial driver itself. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Interesting things about the ioc3 - */ - -#define LOGICAL_PORTS 2 /* rs232(0) and rs422(1) */ -#define PORTS_PER_CARD 2 -#define LOGICAL_PORTS_PER_CARD (PORTS_PER_CARD * LOGICAL_PORTS) -#define MAX_CARDS 8 -#define MAX_LOGICAL_PORTS (LOGICAL_PORTS_PER_CARD * MAX_CARDS) - -/* determine given the sio_ir what port it applies to */ -#define GET_PORT_FROM_SIO_IR(_x) (_x & SIO_IR_SA) ? 0 : 1 - - -/* - * we have 2 logical ports (rs232, rs422) for each physical port - * evens are rs232, odds are rs422 - */ -#define GET_PHYSICAL_PORT(_x) ((_x) >> 1) -#define GET_LOGICAL_PORT(_x) ((_x) & 1) -#define IS_PHYSICAL_PORT(_x) !((_x) & 1) -#define IS_RS232(_x) !((_x) & 1) - -static unsigned int Num_of_ioc3_cards; -static unsigned int Submodule_slot; - -/* defining this will get you LOTS of great debug info */ -//#define DEBUG_INTERRUPTS -#define DPRINT_CONFIG(_x...) ; -//#define DPRINT_CONFIG(_x...) printk _x -#define NOT_PROGRESS() ; -//#define NOT_PROGRESS() printk("%s : fails %d\n", __func__, __LINE__) - -/* number of characters we want to transmit to the lower level at a time */ -#define MAX_CHARS 256 -#define FIFO_SIZE (MAX_CHARS-1) /* it's a uchar */ - -/* Device name we're using */ -#define DEVICE_NAME "ttySIOC" -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR 116 - -/* flags for next_char_state */ -#define NCS_BREAK 0x1 -#define NCS_PARITY 0x2 -#define NCS_FRAMING 0x4 -#define NCS_OVERRUN 0x8 - -/* cause we need SOME parameters ... */ -#define MIN_BAUD_SUPPORTED 1200 -#define MAX_BAUD_SUPPORTED 115200 - -/* protocol types supported */ -#define PROTO_RS232 0 -#define PROTO_RS422 1 - -/* Notification types */ -#define N_DATA_READY 0x01 -#define N_OUTPUT_LOWAT 0x02 -#define N_BREAK 0x04 -#define N_PARITY_ERROR 0x08 -#define N_FRAMING_ERROR 0x10 -#define N_OVERRUN_ERROR 0x20 -#define N_DDCD 0x40 -#define N_DCTS 0x80 - -#define N_ALL_INPUT (N_DATA_READY | N_BREAK \ - | N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define N_ALL_OUTPUT N_OUTPUT_LOWAT - -#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR) - -#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK \ - | N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define SER_CLK_SPEED(prediv) ((22000000 << 1) / prediv) -#define SER_DIVISOR(x, clk) (((clk) + (x) * 8) / ((x) * 16)) -#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) - -/* Some masks */ -#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ - | UART_LCR_WLEN7 | UART_LCR_WLEN8) -#define LCR_MASK_STOP_BITS (UART_LCR_STOP) - -#define PENDING(_a, _p) (readl(&(_p)->vma->sio_ir) & (_a)->ic_enable) - -#define RING_BUF_SIZE 4096 -#define BUF_SIZE_BIT SBBR_L_SIZE -#define PROD_CONS_MASK PROD_CONS_PTR_4K - -#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) - -/* driver specific - one per card */ -struct ioc3_card { - struct { - /* uart ports are allocated here */ - struct uart_port icp_uart_port[LOGICAL_PORTS]; - /* the ioc3_port used for this port */ - struct ioc3_port *icp_port; - } ic_port[PORTS_PER_CARD]; - /* currently enabled interrupts */ - uint32_t ic_enable; -}; - -/* Local port info for each IOC3 serial port */ -struct ioc3_port { - /* handy reference material */ - struct uart_port *ip_port; - struct ioc3_card *ip_card; - struct ioc3_driver_data *ip_idd; - struct ioc3_submodule *ip_is; - - /* pci mem addresses for this port */ - struct ioc3_serialregs __iomem *ip_serial_regs; - struct ioc3_uartregs __iomem *ip_uart_regs; - - /* Ring buffer page for this port */ - dma_addr_t ip_dma_ringbuf; - /* vaddr of ring buffer */ - struct ring_buffer *ip_cpu_ringbuf; - - /* Rings for this port */ - struct ring *ip_inring; - struct ring *ip_outring; - - /* Hook to port specific values */ - struct port_hooks *ip_hooks; - - spinlock_t ip_lock; - - /* Various rx/tx parameters */ - int ip_baud; - int ip_tx_lowat; - int ip_rx_timeout; - - /* Copy of notification bits */ - int ip_notify; - - /* Shadow copies of various registers so we don't need to PIO - * read them constantly - */ - uint32_t ip_sscr; - uint32_t ip_tx_prod; - uint32_t ip_rx_cons; - unsigned char ip_flags; -}; - -/* tx low water mark. We need to notify the driver whenever tx is getting - * close to empty so it can refill the tx buffer and keep things going. - * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll - * have no trouble getting in more chars in time (I certainly hope so). - */ -#define TX_LOWAT_LATENCY 1000 -#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) -#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) - -/* Flags per port */ -#define INPUT_HIGH 0x01 - /* used to signify that we have turned off the rx_high - * temporarily - we need to drain the fifo and don't - * want to get blasted with interrupts. - */ -#define DCD_ON 0x02 - /* DCD state is on */ -#define LOWAT_WRITTEN 0x04 -#define READ_ABORTED 0x08 - /* the read was aborted - used to avaoid infinate looping - * in the interrupt handler - */ -#define INPUT_ENABLE 0x10 - -/* Since each port has different register offsets and bitmasks - * for everything, we'll store those that we need in tables so we - * don't have to be constantly checking the port we are dealing with. - */ -struct port_hooks { - uint32_t intr_delta_dcd; - uint32_t intr_delta_cts; - uint32_t intr_tx_mt; - uint32_t intr_rx_timer; - uint32_t intr_rx_high; - uint32_t intr_tx_explicit; - uint32_t intr_clear; - uint32_t intr_all; - char rs422_select_pin; -}; - -static struct port_hooks hooks_array[PORTS_PER_CARD] = { - /* values for port A */ - { - .intr_delta_dcd = SIO_IR_SA_DELTA_DCD, - .intr_delta_cts = SIO_IR_SA_DELTA_CTS, - .intr_tx_mt = SIO_IR_SA_TX_MT, - .intr_rx_timer = SIO_IR_SA_RX_TIMER, - .intr_rx_high = SIO_IR_SA_RX_HIGH, - .intr_tx_explicit = SIO_IR_SA_TX_EXPLICIT, - .intr_clear = (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL - | SIO_IR_SA_RX_HIGH - | SIO_IR_SA_RX_TIMER - | SIO_IR_SA_DELTA_DCD - | SIO_IR_SA_DELTA_CTS - | SIO_IR_SA_INT - | SIO_IR_SA_TX_EXPLICIT - | SIO_IR_SA_MEMERR), - .intr_all = SIO_IR_SA, - .rs422_select_pin = GPPR_UARTA_MODESEL_PIN, - }, - - /* values for port B */ - { - .intr_delta_dcd = SIO_IR_SB_DELTA_DCD, - .intr_delta_cts = SIO_IR_SB_DELTA_CTS, - .intr_tx_mt = SIO_IR_SB_TX_MT, - .intr_rx_timer = SIO_IR_SB_RX_TIMER, - .intr_rx_high = SIO_IR_SB_RX_HIGH, - .intr_tx_explicit = SIO_IR_SB_TX_EXPLICIT, - .intr_clear = (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL - | SIO_IR_SB_RX_HIGH - | SIO_IR_SB_RX_TIMER - | SIO_IR_SB_DELTA_DCD - | SIO_IR_SB_DELTA_CTS - | SIO_IR_SB_INT - | SIO_IR_SB_TX_EXPLICIT - | SIO_IR_SB_MEMERR), - .intr_all = SIO_IR_SB, - .rs422_select_pin = GPPR_UARTB_MODESEL_PIN, - } -}; - -struct ring_entry { - union { - struct { - uint32_t alldata; - uint32_t allsc; - } all; - struct { - char data[4]; /* data bytes */ - char sc[4]; /* status/control */ - } s; - } u; -}; - -/* Test the valid bits in any of the 4 sc chars using "allsc" member */ -#define RING_ANY_VALID \ - ((uint32_t)(RXSB_MODEM_VALID | RXSB_DATA_VALID) * 0x01010101) - -#define ring_sc u.s.sc -#define ring_data u.s.data -#define ring_allsc u.all.allsc - -/* Number of entries per ring buffer. */ -#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) - -/* An individual ring */ -struct ring { - struct ring_entry entries[ENTRIES_PER_RING]; -}; - -/* The whole enchilada */ -struct ring_buffer { - struct ring TX_A; - struct ring RX_A; - struct ring TX_B; - struct ring RX_B; -}; - -/* Get a ring from a port struct */ -#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) - -/* for Infinite loop detection */ -#define MAXITER 10000000 - - -/** - * set_baud - Baud rate setting code - * @port: port to set - * @baud: baud rate to use - */ -static int set_baud(struct ioc3_port *port, int baud) -{ - int divisor; - int actual_baud; - int diff; - int lcr, prediv; - struct ioc3_uartregs __iomem *uart; - - for (prediv = 6; prediv < 64; prediv++) { - divisor = SER_DIVISOR(baud, SER_CLK_SPEED(prediv)); - if (!divisor) - continue; /* invalid divisor */ - actual_baud = DIVISOR_TO_BAUD(divisor, SER_CLK_SPEED(prediv)); - - diff = actual_baud - baud; - if (diff < 0) - diff = -diff; - - /* if we're within 1% we've found a match */ - if (diff * 100 <= actual_baud) - break; - } - - /* if the above loop completed, we didn't match - * the baud rate. give up. - */ - if (prediv == 64) { - NOT_PROGRESS(); - return 1; - } - - uart = port->ip_uart_regs; - lcr = readb(&uart->iu_lcr); - - writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr); - writeb((unsigned char)divisor, &uart->iu_dll); - writeb((unsigned char)(divisor >> 8), &uart->iu_dlm); - writeb((unsigned char)prediv, &uart->iu_scr); - writeb((unsigned char)lcr, &uart->iu_lcr); - - return 0; -} - -/** - * get_ioc3_port - given a uart port, return the control structure - * @the_port: uart port to find - */ -static struct ioc3_port *get_ioc3_port(struct uart_port *the_port) -{ - struct ioc3_driver_data *idd = dev_get_drvdata(the_port->dev); - struct ioc3_card *card_ptr = idd->data[Submodule_slot]; - int ii, jj; - - if (!card_ptr) { - NOT_PROGRESS(); - return NULL; - } - for (ii = 0; ii < PORTS_PER_CARD; ii++) { - for (jj = 0; jj < LOGICAL_PORTS; jj++) { - if (the_port == &card_ptr->ic_port[ii].icp_uart_port[jj]) - return card_ptr->ic_port[ii].icp_port; - } - } - NOT_PROGRESS(); - return NULL; -} - -/** - * port_init - Initialize the sio and ioc3 hardware for a given port - * called per port from attach... - * @port: port to initialize - */ -static int inline port_init(struct ioc3_port *port) -{ - uint32_t sio_cr; - struct port_hooks *hooks = port->ip_hooks; - struct ioc3_uartregs __iomem *uart; - int reset_loop_counter = 0xfffff; - struct ioc3_driver_data *idd = port->ip_idd; - - /* Idle the IOC3 serial interface */ - writel(SSCR_RESET, &port->ip_serial_regs->sscr); - - /* Wait until any pending bus activity for this port has ceased */ - do { - sio_cr = readl(&idd->vma->sio_cr); - if (reset_loop_counter-- <= 0) { - printk(KERN_WARNING - "IOC3 unable to come out of reset" - " scr 0x%x\n", sio_cr); - return -1; - } - } while (!(sio_cr & SIO_CR_ARB_DIAG_IDLE) && - (((sio_cr &= SIO_CR_ARB_DIAG) == SIO_CR_ARB_DIAG_TXA) - || sio_cr == SIO_CR_ARB_DIAG_TXB - || sio_cr == SIO_CR_ARB_DIAG_RXA - || sio_cr == SIO_CR_ARB_DIAG_RXB)); - - /* Finish reset sequence */ - writel(0, &port->ip_serial_regs->sscr); - - /* Once RESET is done, reload cached tx_prod and rx_cons values - * and set rings to empty by making prod == cons - */ - port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); - port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); - - /* Disable interrupts for this 16550 */ - uart = port->ip_uart_regs; - writeb(0, &uart->iu_lcr); - writeb(0, &uart->iu_ier); - - /* Set the default baud */ - set_baud(port, port->ip_baud); - - /* Set line control to 8 bits no parity */ - writeb(UART_LCR_WLEN8 | 0, &uart->iu_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Enable the FIFOs */ - writeb(UART_FCR_ENABLE_FIFO, &uart->iu_fcr); - /* then reset 16550 FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - &uart->iu_fcr); - - /* Clear modem control register */ - writeb(0, &uart->iu_mcr); - - /* Clear deltas in modem status register */ - writel(0, &port->ip_serial_regs->shadow); - - /* Only do this once per port pair */ - if (port->ip_hooks == &hooks_array[0]) { - unsigned long ring_pci_addr; - uint32_t __iomem *sbbr_l, *sbbr_h; - - sbbr_l = &idd->vma->sbbr_l; - sbbr_h = &idd->vma->sbbr_h; - ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; - DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n", - __func__, (void *)ring_pci_addr)); - - writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h); - writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l); - } - - /* Set the receive timeout value to 10 msec */ - writel(SRTR_HZ / 100, &port->ip_serial_regs->srtr); - - /* Set rx threshold, enable DMA */ - /* Set high water mark at 3/4 of full ring */ - port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); - - /* uart experiences pauses at high baud rate reducing actual - * throughput by 10% or so unless we enable high speed polling - * XXX when this hardware bug is resolved we should revert to - * normal polling speed - */ - port->ip_sscr |= SSCR_HIGH_SPD; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Disable and clear all serial related interrupt bits */ - port->ip_card->ic_enable &= ~hooks->intr_clear; - ioc3_disable(port->ip_is, idd, hooks->intr_clear); - ioc3_ack(port->ip_is, idd, hooks->intr_clear); - return 0; -} - -/** - * enable_intrs - enable interrupts - * @port: port to enable - * @mask: mask to use - */ -static void enable_intrs(struct ioc3_port *port, uint32_t mask) -{ - if ((port->ip_card->ic_enable & mask) != mask) { - port->ip_card->ic_enable |= mask; - ioc3_enable(port->ip_is, port->ip_idd, mask); - } -} - -/** - * local_open - local open a port - * @port: port to open - */ -static inline int local_open(struct ioc3_port *port) -{ - int spiniter = 0; - - port->ip_flags = INPUT_ENABLE; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) { - NOT_PROGRESS(); - return -1; - } - } - } - - /* Reset the input fifo. If the uart received chars while the port - * was closed and DMA is not enabled, the uart may have a bunch of - * chars hanging around in its rx fifo which will not be discarded - * by rclr in the upper layer. We must get rid of them here. - */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, - &port->ip_uart_regs->iu_fcr); - - writeb(UART_LCR_WLEN8, &port->ip_uart_regs->iu_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Re-enable DMA, set default threshold to intr whenever there is - * data available. - */ - port->ip_sscr &= ~SSCR_RX_THRESHOLD; - port->ip_sscr |= 1; /* default threshold */ - - /* Plug in the new sscr. This implicitly clears the DMA_PAUSE - * flag if it was set above - */ - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - port->ip_tx_lowat = 1; - return 0; -} - -/** - * set_rx_timeout - Set rx timeout and threshold values. - * @port: port to use - * @timeout: timeout value in ticks - */ -static inline int set_rx_timeout(struct ioc3_port *port, int timeout) -{ - int threshold; - - port->ip_rx_timeout = timeout; - - /* Timeout is in ticks. Let's figure out how many chars we - * can receive at the current baud rate in that interval - * and set the rx threshold to that amount. There are 4 chars - * per ring entry, so we'll divide the number of chars that will - * arrive in timeout by 4. - * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. - */ - threshold = timeout * port->ip_baud / 4000; - if (threshold == 0) - threshold = 1; /* otherwise we'll intr all the time! */ - - if ((unsigned)threshold > (unsigned)SSCR_RX_THRESHOLD) - return 1; - - port->ip_sscr &= ~SSCR_RX_THRESHOLD; - port->ip_sscr |= threshold; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Now set the rx timeout to the given value - * again timeout * SRTR_HZ / HZ - */ - timeout = timeout * SRTR_HZ / 100; - if (timeout > SRTR_CNT) - timeout = SRTR_CNT; - writel(timeout, &port->ip_serial_regs->srtr); - return 0; -} - -/** - * config_port - config the hardware - * @port: port to config - * @baud: baud rate for the port - * @byte_size: data size - * @stop_bits: number of stop bits - * @parenb: parity enable ? - * @parodd: odd parity ? - */ -static inline int -config_port(struct ioc3_port *port, - int baud, int byte_size, int stop_bits, int parenb, int parodd) -{ - char lcr, sizebits; - int spiniter = 0; - - DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d " - "parodd %d\n", - __func__, ((struct uart_port *)port->ip_port)->line, - baud, byte_size, stop_bits, parenb, parodd)); - - if (set_baud(port, baud)) - return 1; - - switch (byte_size) { - case 5: - sizebits = UART_LCR_WLEN5; - break; - case 6: - sizebits = UART_LCR_WLEN6; - break; - case 7: - sizebits = UART_LCR_WLEN7; - break; - case 8: - sizebits = UART_LCR_WLEN8; - break; - default: - return 1; - } - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - - /* Clear relevant fields in lcr */ - lcr = readb(&port->ip_uart_regs->iu_lcr); - lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | - UART_LCR_PARITY | LCR_MASK_STOP_BITS); - - /* Set byte size in lcr */ - lcr |= sizebits; - - /* Set parity */ - if (parenb) { - lcr |= UART_LCR_PARITY; - if (!parodd) - lcr |= UART_LCR_EPAR; - } - - /* Set stop bits */ - if (stop_bits) - lcr |= UART_LCR_STOP /* 2 stop bits */ ; - - writeb(lcr, &port->ip_uart_regs->iu_lcr); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - port->ip_baud = baud; - - /* When we get within this number of ring entries of filling the - * entire ring on tx, place an EXPLICIT intr to generate a lowat - * notification when output has drained. - */ - port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; - if (port->ip_tx_lowat == 0) - port->ip_tx_lowat = 1; - - set_rx_timeout(port, 2); - return 0; -} - -/** - * do_write - Write bytes to the port. Returns the number of bytes - * actually written. Called from transmit_chars - * @port: port to use - * @buf: the stuff to write - * @len: how many bytes in 'buf' - */ -static inline int do_write(struct ioc3_port *port, char *buf, int len) -{ - int prod_ptr, cons_ptr, total = 0; - struct ring *outring; - struct ring_entry *entry; - struct port_hooks *hooks = port->ip_hooks; - - BUG_ON(!(len >= 0)); - - prod_ptr = port->ip_tx_prod; - cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - outring = port->ip_outring; - - /* Maintain a 1-entry red-zone. The ring buffer is full when - * (cons - prod) % ring_size is 1. Rather than do this subtraction - * in the body of the loop, I'll do it now. - */ - cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; - - /* Stuff the bytes into the output */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - int xx; - - /* Get 4 bytes (one ring entry) at a time */ - entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); - - /* Invalidate all entries */ - entry->ring_allsc = 0; - - /* Copy in some bytes */ - for (xx = 0; (xx < 4) && (len > 0); xx++) { - entry->ring_data[xx] = *buf++; - entry->ring_sc[xx] = TXCB_VALID; - len--; - total++; - } - - /* If we are within some small threshold of filling up the - * entire ring buffer, we must place an EXPLICIT intr here - * to generate a lowat interrupt in case we subsequently - * really do fill up the ring and the caller goes to sleep. - * No need to place more than one though. - */ - if (!(port->ip_flags & LOWAT_WRITTEN) && - ((cons_ptr - prod_ptr) & PROD_CONS_MASK) - <= port->ip_tx_lowat * (int)sizeof(struct ring_entry)) { - port->ip_flags |= LOWAT_WRITTEN; - entry->ring_sc[0] |= TXCB_INT_WHEN_DONE; - } - - /* Go on to next entry */ - prod_ptr += sizeof(struct ring_entry); - prod_ptr &= PROD_CONS_MASK; - } - - /* If we sent something, start DMA if necessary */ - if (total > 0 && !(port->ip_sscr & SSCR_DMA_EN)) { - port->ip_sscr |= SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - - /* Store the new producer pointer. If tx is disabled, we stuff the - * data into the ring buffer, but we don't actually start tx. - */ - if (!uart_tx_stopped(port->ip_port)) { - writel(prod_ptr, &port->ip_serial_regs->stpir); - - /* If we are now transmitting, enable tx_mt interrupt so we - * can disable DMA if necessary when the tx finishes. - */ - if (total > 0) - enable_intrs(port, hooks->intr_tx_mt); - } - port->ip_tx_prod = prod_ptr; - - return total; -} - -/** - * disable_intrs - disable interrupts - * @port: port to enable - * @mask: mask to use - */ -static inline void disable_intrs(struct ioc3_port *port, uint32_t mask) -{ - if (port->ip_card->ic_enable & mask) { - ioc3_disable(port->ip_is, port->ip_idd, mask); - port->ip_card->ic_enable &= ~mask; - } -} - -/** - * set_notification - Modify event notification - * @port: port to use - * @mask: events mask - * @set_on: set ? - */ -static int set_notification(struct ioc3_port *port, int mask, int set_on) -{ - struct port_hooks *hooks = port->ip_hooks; - uint32_t intrbits, sscrbits; - - BUG_ON(!mask); - - intrbits = sscrbits = 0; - - if (mask & N_DATA_READY) - intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); - if (mask & N_OUTPUT_LOWAT) - intrbits |= hooks->intr_tx_explicit; - if (mask & N_DDCD) { - intrbits |= hooks->intr_delta_dcd; - sscrbits |= SSCR_RX_RING_DCD; - } - if (mask & N_DCTS) - intrbits |= hooks->intr_delta_cts; - - if (set_on) { - enable_intrs(port, intrbits); - port->ip_notify |= mask; - port->ip_sscr |= sscrbits; - } else { - disable_intrs(port, intrbits); - port->ip_notify &= ~mask; - port->ip_sscr &= ~sscrbits; - } - - /* We require DMA if either DATA_READY or DDCD notification is - * currently requested. If neither of these is requested and - * there is currently no tx in progress, DMA may be disabled. - */ - if (port->ip_notify & (N_DATA_READY | N_DDCD)) - port->ip_sscr |= SSCR_DMA_EN; - else if (!(port->ip_card->ic_enable & hooks->intr_tx_mt)) - port->ip_sscr &= ~SSCR_DMA_EN; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - return 0; -} - -/** - * set_mcr - set the master control reg - * @the_port: port to use - * @mask1: mcr mask - * @mask2: shadow mask - */ -static inline int set_mcr(struct uart_port *the_port, - int mask1, int mask2) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - uint32_t shadow; - int spiniter = 0; - char mcr; - - if (!port) - return -1; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - shadow = readl(&port->ip_serial_regs->shadow); - mcr = (shadow & 0xff000000) >> 24; - - /* Set new value */ - mcr |= mask1; - shadow |= mask2; - writeb(mcr, &port->ip_uart_regs->iu_mcr); - writel(shadow, &port->ip_serial_regs->shadow); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - return 0; -} - -/** - * ioc3_set_proto - set the protocol for the port - * @port: port to use - * @proto: protocol to use - */ -static int ioc3_set_proto(struct ioc3_port *port, int proto) -{ - struct port_hooks *hooks = port->ip_hooks; - - switch (proto) { - default: - case PROTO_RS232: - /* Clear the appropriate GIO pin */ - DPRINT_CONFIG(("%s: rs232\n", __func__)); - writel(0, (&port->ip_idd->vma->gppr[0] - + hooks->rs422_select_pin)); - break; - - case PROTO_RS422: - /* Set the appropriate GIO pin */ - DPRINT_CONFIG(("%s: rs422\n", __func__)); - writel(1, (&port->ip_idd->vma->gppr[0] - + hooks->rs422_select_pin)); - break; - } - return 0; -} - -/** - * transmit_chars - upper level write, called with the_port->lock - * @the_port: port to write - */ -static void transmit_chars(struct uart_port *the_port) -{ - int xmit_count, tail, head; - int result; - char *start; - struct tty_struct *tty; - struct ioc3_port *port = get_ioc3_port(the_port); - struct uart_state *state; - - if (!the_port) - return; - if (!port) - return; - - state = the_port->state; - tty = state->port.tty; - - if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { - /* Nothing to do or hw stopped */ - set_notification(port, N_ALL_OUTPUT, 0); - return; - } - - head = state->xmit.head; - tail = state->xmit.tail; - start = (char *)&state->xmit.buf[tail]; - - /* write out all the data or until the end of the buffer */ - xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); - if (xmit_count > 0) { - result = do_write(port, start, xmit_count); - if (result > 0) { - /* booking */ - xmit_count -= result; - the_port->icount.tx += result; - /* advance the pointers */ - tail += result; - tail &= UART_XMIT_SIZE - 1; - state->xmit.tail = tail; - start = (char *)&state->xmit.buf[tail]; - } - } - if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) - uart_write_wakeup(the_port); - - if (uart_circ_empty(&state->xmit)) { - set_notification(port, N_OUTPUT_LOWAT, 0); - } else { - set_notification(port, N_OUTPUT_LOWAT, 1); - } -} - -/** - * ioc3_change_speed - change the speed of the port - * @the_port: port to change - * @new_termios: new termios settings - * @old_termios: old termios settings - */ -static void -ioc3_change_speed(struct uart_port *the_port, - struct ktermios *new_termios, struct ktermios *old_termios) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - unsigned int cflag, iflag; - int baud; - int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; - struct uart_state *state = the_port->state; - - cflag = new_termios->c_cflag; - iflag = new_termios->c_iflag; - - switch (cflag & CSIZE) { - case CS5: - new_data = 5; - break; - case CS6: - new_data = 6; - break; - case CS7: - new_data = 7; - break; - case CS8: - new_data = 8; - break; - default: - /* cuz we always need a default ... */ - new_data = 5; - break; - } - if (cflag & CSTOPB) { - new_stop = 1; - } - if (cflag & PARENB) { - new_parity_enable = 1; - if (cflag & PARODD) - new_parity = 1; - } - baud = uart_get_baud_rate(the_port, new_termios, old_termios, - MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); - DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud, - the_port->line)); - - if (!the_port->fifosize) - the_port->fifosize = FIFO_SIZE; - uart_update_timeout(the_port, cflag, baud); - - the_port->ignore_status_mask = N_ALL_INPUT; - - state->port.tty->low_latency = 1; - - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~(N_PARITY_ERROR - | N_FRAMING_ERROR); - if (iflag & IGNBRK) { - the_port->ignore_status_mask &= ~N_BREAK; - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; - } - if (!(cflag & CREAD)) { - /* ignore everything */ - the_port->ignore_status_mask &= ~N_DATA_READY; - } - - if (cflag & CRTSCTS) { - /* enable hardware flow control */ - port->ip_sscr |= SSCR_HFC_EN; - } - else { - /* disable hardware flow control */ - port->ip_sscr &= ~SSCR_HFC_EN; - } - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Set the configuration and proper notification call */ - DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o " - "config_port(baud %d data %d stop %d penable %d " - " parity %d), notification 0x%x\n", - __func__, (void *)port, the_port->line, cflag, baud, - new_data, new_stop, new_parity_enable, new_parity, - the_port->ignore_status_mask)); - - if ((config_port(port, baud, /* baud */ - new_data, /* byte size */ - new_stop, /* stop bits */ - new_parity_enable, /* set parity */ - new_parity)) >= 0) { /* parity 1==odd */ - set_notification(port, the_port->ignore_status_mask, 1); - } -} - -/** - * ic3_startup_local - Start up the serial port - returns >= 0 if no errors - * @the_port: Port to operate on - */ -static inline int ic3_startup_local(struct uart_port *the_port) -{ - struct ioc3_port *port; - - if (!the_port) { - NOT_PROGRESS(); - return -1; - } - - port = get_ioc3_port(the_port); - if (!port) { - NOT_PROGRESS(); - return -1; - } - - local_open(port); - - /* set the protocol */ - ioc3_set_proto(port, IS_RS232(the_port->line) ? PROTO_RS232 : - PROTO_RS422); - return 0; -} - -/* - * ioc3_cb_output_lowat - called when the output low water mark is hit - * @port: port to output - */ -static void ioc3_cb_output_lowat(struct ioc3_port *port) -{ - unsigned long pflags; - - /* the_port->lock is set on the call here */ - if (port->ip_port) { - spin_lock_irqsave(&port->ip_port->lock, pflags); - transmit_chars(port->ip_port); - spin_unlock_irqrestore(&port->ip_port->lock, pflags); - } -} - -/* - * ioc3_cb_post_ncs - called for some basic errors - * @port: port to use - * @ncs: event - */ -static void ioc3_cb_post_ncs(struct uart_port *the_port, int ncs) -{ - struct uart_icount *icount; - - icount = &the_port->icount; - - if (ncs & NCS_BREAK) - icount->brk++; - if (ncs & NCS_FRAMING) - icount->frame++; - if (ncs & NCS_OVERRUN) - icount->overrun++; - if (ncs & NCS_PARITY) - icount->parity++; -} - -/** - * do_read - Read in bytes from the port. Return the number of bytes - * actually read. - * @the_port: port to use - * @buf: place to put the stuff we read - * @len: how big 'buf' is - */ - -static inline int do_read(struct uart_port *the_port, char *buf, int len) -{ - int prod_ptr, cons_ptr, total; - struct ioc3_port *port = get_ioc3_port(the_port); - struct ring *inring; - struct ring_entry *entry; - struct port_hooks *hooks = port->ip_hooks; - int byte_num; - char *sc; - int loop_counter; - - BUG_ON(!(len >= 0)); - BUG_ON(!port); - - /* There is a nasty timing issue in the IOC3. When the rx_timer - * expires or the rx_high condition arises, we take an interrupt. - * At some point while servicing the interrupt, we read bytes from - * the ring buffer and re-arm the rx_timer. However the rx_timer is - * not started until the first byte is received *after* it is armed, - * and any bytes pending in the rx construction buffers are not drained - * to memory until either there are 4 bytes available or the rx_timer - * expires. This leads to a potential situation where data is left - * in the construction buffers forever - 1 to 3 bytes were received - * after the interrupt was generated but before the rx_timer was - * re-armed. At that point as long as no subsequent bytes are received - * the timer will never be started and the bytes will remain in the - * construction buffer forever. The solution is to execute a DRAIN - * command after rearming the timer. This way any bytes received before - * the DRAIN will be drained to memory, and any bytes received after - * the DRAIN will start the TIMER and be drained when it expires. - * Luckily, this only needs to be done when the DMA buffer is empty - * since there is no requirement that this function return all - * available data as long as it returns some. - */ - /* Re-arm the timer */ - - writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); - - prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - cons_ptr = port->ip_rx_cons; - - if (prod_ptr == cons_ptr) { - int reset_dma = 0; - - /* Input buffer appears empty, do a flush. */ - - /* DMA must be enabled for this to work. */ - if (!(port->ip_sscr & SSCR_DMA_EN)) { - port->ip_sscr |= SSCR_DMA_EN; - reset_dma = 1; - } - - /* Potential race condition: we must reload the srpir after - * issuing the drain command, otherwise we could think the rx - * buffer is empty, then take a very long interrupt, and when - * we come back it's full and we wait forever for the drain to - * complete. - */ - writel(port->ip_sscr | SSCR_RX_DRAIN, - &port->ip_serial_regs->sscr); - prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - - /* We must not wait for the DRAIN to complete unless there are - * at least 8 bytes (2 ring entries) available to receive the - * data otherwise the DRAIN will never complete and we'll - * deadlock here. - * In fact, to make things easier, I'll just ignore the flush if - * there is any data at all now available. - */ - if (prod_ptr == cons_ptr) { - loop_counter = 0; - while (readl(&port->ip_serial_regs->sscr) & - SSCR_RX_DRAIN) { - loop_counter++; - if (loop_counter > MAXITER) - return -1; - } - - /* SIGH. We have to reload the prod_ptr *again* since - * the drain may have caused it to change - */ - prod_ptr = readl(&port->ip_serial_regs->srpir) - & PROD_CONS_MASK; - } - if (reset_dma) { - port->ip_sscr &= ~SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - } - inring = port->ip_inring; - port->ip_flags &= ~READ_ABORTED; - - total = 0; - loop_counter = 0xfffff; /* to avoid hangs */ - - /* Grab bytes from the hardware */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - entry = (struct ring_entry *)((caddr_t) inring + cons_ptr); - - if (loop_counter-- <= 0) { - printk(KERN_WARNING "IOC3 serial: " - "possible hang condition/" - "port stuck on read (line %d).\n", - the_port->line); - break; - } - - /* According to the producer pointer, this ring entry - * must contain some data. But if the PIO happened faster - * than the DMA, the data may not be available yet, so let's - * wait until it arrives. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - /* Indicate the read is aborted so we don't disable - * the interrupt thinking that the consumer is - * congested. - */ - port->ip_flags |= READ_ABORTED; - len = 0; - break; - } - - /* Load the bytes/status out of the ring entry */ - for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { - sc = &(entry->ring_sc[byte_num]); - - /* Check for change in modem state or overrun */ - if ((*sc & RXSB_MODEM_VALID) - && (port->ip_notify & N_DDCD)) { - /* Notify upper layer if DCD dropped */ - if ((port->ip_flags & DCD_ON) - && !(*sc & RXSB_DCD)) { - /* If we have already copied some data, - * return it. We'll pick up the carrier - * drop on the next pass. That way we - * don't throw away the data that has - * already been copied back to - * the caller's buffer. - */ - if (total > 0) { - len = 0; - break; - } - port->ip_flags &= ~DCD_ON; - - /* Turn off this notification so the - * carrier drop protocol won't see it - * again when it does a read. - */ - *sc &= ~RXSB_MODEM_VALID; - - /* To keep things consistent, we need - * to update the consumer pointer so - * the next reader won't come in and - * try to read the same ring entries - * again. This must be done here before - * the dcd change. - */ - - if ((entry->ring_allsc & RING_ANY_VALID) - == 0) { - cons_ptr += (int)sizeof - (struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - writel(cons_ptr, - &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* Notify upper layer of carrier drop */ - if ((port->ip_notify & N_DDCD) - && port->ip_port) { - uart_handle_dcd_change - (port->ip_port, 0); - wake_up_interruptible - (&the_port->state-> - port.delta_msr_wait); - } - - /* If we had any data to return, we - * would have returned it above. - */ - return 0; - } - } - if (*sc & RXSB_MODEM_VALID) { - /* Notify that an input overrun occurred */ - if ((*sc & RXSB_OVERRUN) - && (port->ip_notify & N_OVERRUN_ERROR)) { - ioc3_cb_post_ncs(the_port, NCS_OVERRUN); - } - /* Don't look at this byte again */ - *sc &= ~RXSB_MODEM_VALID; - } - - /* Check for valid data or RX errors */ - if ((*sc & RXSB_DATA_VALID) && - ((*sc & (RXSB_PAR_ERR - | RXSB_FRAME_ERR | RXSB_BREAK)) - && (port->ip_notify & (N_PARITY_ERROR - | N_FRAMING_ERROR - | N_BREAK)))) { - /* There is an error condition on the next byte. - * If we have already transferred some bytes, - * we'll stop here. Otherwise if this is the - * first byte to be read, we'll just transfer - * it alone after notifying the - * upper layer of its status. - */ - if (total > 0) { - len = 0; - break; - } else { - if ((*sc & RXSB_PAR_ERR) && - (port-> - ip_notify & N_PARITY_ERROR)) { - ioc3_cb_post_ncs(the_port, - NCS_PARITY); - } - if ((*sc & RXSB_FRAME_ERR) && - (port-> - ip_notify & N_FRAMING_ERROR)) { - ioc3_cb_post_ncs(the_port, - NCS_FRAMING); - } - if ((*sc & RXSB_BREAK) - && (port->ip_notify & N_BREAK)) { - ioc3_cb_post_ncs - (the_port, NCS_BREAK); - } - len = 1; - } - } - if (*sc & RXSB_DATA_VALID) { - *sc &= ~RXSB_DATA_VALID; - *buf = entry->ring_data[byte_num]; - buf++; - len--; - total++; - } - } - - /* If we used up this entry entirely, go on to the next one, - * otherwise we must have run out of buffer space, so - * leave the consumer pointer here for the next read in case - * there are still unread bytes in this entry. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - cons_ptr += (int)sizeof(struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - } - - /* Update consumer pointer and re-arm rx timer interrupt */ - writel(cons_ptr, &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* If we have now dipped below the rx high water mark and we have - * rx_high interrupt turned off, we can now turn it back on again. - */ - if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) - & PROD_CONS_MASK) < - ((port-> - ip_sscr & - SSCR_RX_THRESHOLD) - << PROD_CONS_PTR_OFF))) { - port->ip_flags &= ~INPUT_HIGH; - enable_intrs(port, hooks->intr_rx_high); - } - return total; -} - -/** - * receive_chars - upper level read. - * @the_port: port to read from - */ -static int receive_chars(struct uart_port *the_port) -{ - struct tty_struct *tty; - unsigned char ch[MAX_CHARS]; - int read_count = 0, read_room, flip = 0; - struct uart_state *state = the_port->state; - struct ioc3_port *port = get_ioc3_port(the_port); - unsigned long pflags; - - /* Make sure all the pointers are "good" ones */ - if (!state) - return 0; - if (!state->port.tty) - return 0; - - if (!(port->ip_flags & INPUT_ENABLE)) - return 0; - - spin_lock_irqsave(&the_port->lock, pflags); - tty = state->port.tty; - - read_count = do_read(the_port, ch, MAX_CHARS); - if (read_count > 0) { - flip = 1; - read_room = tty_insert_flip_string(tty, ch, read_count); - the_port->icount.rx += read_count; - } - spin_unlock_irqrestore(&the_port->lock, pflags); - - if (flip) - tty_flip_buffer_push(tty); - - return read_count; -} - -/** - * ioc3uart_intr_one - lowest level (per port) interrupt handler. - * @is : submodule - * @idd: driver data - * @pending: interrupts to handle - */ - -static int inline -ioc3uart_intr_one(struct ioc3_submodule *is, - struct ioc3_driver_data *idd, - unsigned int pending) -{ - int port_num = GET_PORT_FROM_SIO_IR(pending); - struct port_hooks *hooks; - unsigned int rx_high_rd_aborted = 0; - unsigned long flags; - struct uart_port *the_port; - struct ioc3_port *port; - int loop_counter; - struct ioc3_card *card_ptr; - unsigned int sio_ir; - - card_ptr = idd->data[is->id]; - port = card_ptr->ic_port[port_num].icp_port; - hooks = port->ip_hooks; - - /* Possible race condition here: The tx_mt interrupt bit may be - * cleared without the intervention of the interrupt handler, - * e.g. by a write. If the top level interrupt handler reads a - * tx_mt, then some other processor does a write, starting up - * output, then we come in here, see the tx_mt and stop DMA, the - * output started by the other processor will hang. Thus we can - * only rely on tx_mt being legitimate if it is read while the - * port lock is held. Therefore this bit must be ignored in the - * passed in interrupt mask which was read by the top level - * interrupt handler since the port lock was not held at the time - * it was read. We can only rely on this bit being accurate if it - * is read while the port lock is held. So we'll clear it for now, - * and reload it later once we have the port lock. - */ - - sio_ir = pending & ~(hooks->intr_tx_mt); - spin_lock_irqsave(&port->ip_lock, flags); - - loop_counter = MAXITER; /* to avoid hangs */ - - do { - uint32_t shadow; - - if (loop_counter-- <= 0) { - printk(KERN_WARNING "IOC3 serial: " - "possible hang condition/" - "port stuck on interrupt (line %d).\n", - ((struct uart_port *)port->ip_port)->line); - break; - } - /* Handle a DCD change */ - if (sio_ir & hooks->intr_delta_dcd) { - ioc3_ack(is, idd, hooks->intr_delta_dcd); - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DDCD) - && (shadow & SHADOW_DCD) - && (port->ip_port)) { - the_port = port->ip_port; - uart_handle_dcd_change(the_port, - shadow & SHADOW_DCD); - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } else if ((port->ip_notify & N_DDCD) - && !(shadow & SHADOW_DCD)) { - /* Flag delta DCD/no DCD */ - uart_handle_dcd_change(port->ip_port, - shadow & SHADOW_DCD); - port->ip_flags |= DCD_ON; - } - } - - /* Handle a CTS change */ - if (sio_ir & hooks->intr_delta_cts) { - ioc3_ack(is, idd, hooks->intr_delta_cts); - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DCTS) && (port->ip_port)) { - the_port = port->ip_port; - uart_handle_cts_change(the_port, shadow - & SHADOW_CTS); - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } - } - - /* rx timeout interrupt. Must be some data available. Put this - * before the check for rx_high since servicing this condition - * may cause that condition to clear. - */ - if (sio_ir & hooks->intr_rx_timer) { - ioc3_ack(is, idd, hooks->intr_rx_timer); - if ((port->ip_notify & N_DATA_READY) - && (port->ip_port)) { - receive_chars(port->ip_port); - } - } - - /* rx high interrupt. Must be after rx_timer. */ - else if (sio_ir & hooks->intr_rx_high) { - /* Data available, notify upper layer */ - if ((port->ip_notify & N_DATA_READY) && port->ip_port) { - receive_chars(port->ip_port); - } - - /* We can't ACK this interrupt. If receive_chars didn't - * cause the condition to clear, we'll have to disable - * the interrupt until the data is drained. - * If the read was aborted, don't disable the interrupt - * as this may cause us to hang indefinitely. An - * aborted read generally means that this interrupt - * hasn't been delivered to the cpu yet anyway, even - * though we see it as asserted when we read the sio_ir. - */ - if ((sio_ir = PENDING(card_ptr, idd)) - & hooks->intr_rx_high) { - if (port->ip_flags & READ_ABORTED) { - rx_high_rd_aborted++; - } - else { - card_ptr->ic_enable &= ~hooks->intr_rx_high; - port->ip_flags |= INPUT_HIGH; - } - } - } - - /* We got a low water interrupt: notify upper layer to - * send more data. Must come before tx_mt since servicing - * this condition may cause that condition to clear. - */ - if (sio_ir & hooks->intr_tx_explicit) { - port->ip_flags &= ~LOWAT_WRITTEN; - ioc3_ack(is, idd, hooks->intr_tx_explicit); - if (port->ip_notify & N_OUTPUT_LOWAT) - ioc3_cb_output_lowat(port); - } - - /* Handle tx_mt. Must come after tx_explicit. */ - else if (sio_ir & hooks->intr_tx_mt) { - /* If we are expecting a lowat notification - * and we get to this point it probably means that for - * some reason the tx_explicit didn't work as expected - * (that can legitimately happen if the output buffer is - * filled up in just the right way). - * So send the notification now. - */ - if (port->ip_notify & N_OUTPUT_LOWAT) { - ioc3_cb_output_lowat(port); - - /* We need to reload the sio_ir since the lowat - * call may have caused another write to occur, - * clearing the tx_mt condition. - */ - sio_ir = PENDING(card_ptr, idd); - } - - /* If the tx_mt condition still persists even after the - * lowat call, we've got some work to do. - */ - if (sio_ir & hooks->intr_tx_mt) { - /* If we are not currently expecting DMA input, - * and the transmitter has just gone idle, - * there is no longer any reason for DMA, so - * disable it. - */ - if (!(port->ip_notify - & (N_DATA_READY | N_DDCD))) { - BUG_ON(!(port->ip_sscr - & SSCR_DMA_EN)); - port->ip_sscr &= ~SSCR_DMA_EN; - writel(port->ip_sscr, - &port->ip_serial_regs->sscr); - } - /* Prevent infinite tx_mt interrupt */ - card_ptr->ic_enable &= ~hooks->intr_tx_mt; - } - } - sio_ir = PENDING(card_ptr, idd); - - /* if the read was aborted and only hooks->intr_rx_high, - * clear hooks->intr_rx_high, so we do not loop forever. - */ - - if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { - sio_ir &= ~hooks->intr_rx_high; - } - } while (sio_ir & hooks->intr_all); - - spin_unlock_irqrestore(&port->ip_lock, flags); - ioc3_enable(is, idd, card_ptr->ic_enable); - return 0; -} - -/** - * ioc3uart_intr - field all serial interrupts - * @is : submodule - * @idd: driver data - * @pending: interrupts to handle - * - */ - -static int ioc3uart_intr(struct ioc3_submodule *is, - struct ioc3_driver_data *idd, - unsigned int pending) -{ - int ret = 0; - - /* - * The upper level interrupt handler sends interrupts for both ports - * here. So we need to call for each port with its interrupts. - */ - - if (pending & SIO_IR_SA) - ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SA); - if (pending & SIO_IR_SB) - ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SB); - - return ret; -} - -/** - * ic3_type - * @port: Port to operate with (we ignore since we only have one port) - * - */ -static const char *ic3_type(struct uart_port *the_port) -{ - if (IS_RS232(the_port->line)) - return "SGI IOC3 Serial [rs232]"; - else - return "SGI IOC3 Serial [rs422]"; -} - -/** - * ic3_tx_empty - Is the transmitter empty? - * @port: Port to operate on - * - */ -static unsigned int ic3_tx_empty(struct uart_port *the_port) -{ - unsigned int ret = 0; - struct ioc3_port *port = get_ioc3_port(the_port); - - if (readl(&port->ip_serial_regs->shadow) & SHADOW_TEMT) - ret = TIOCSER_TEMT; - return ret; -} - -/** - * ic3_stop_tx - stop the transmitter - * @port: Port to operate on - * - */ -static void ic3_stop_tx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) - set_notification(port, N_OUTPUT_LOWAT, 0); -} - -/** - * ic3_stop_rx - stop the receiver - * @port: Port to operate on - * - */ -static void ic3_stop_rx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) - port->ip_flags &= ~INPUT_ENABLE; -} - -/** - * null_void_function - * @port: Port to operate on - * - */ -static void null_void_function(struct uart_port *the_port) -{ -} - -/** - * ic3_shutdown - shut down the port - free irq and disable - * @port: port to shut down - * - */ -static void ic3_shutdown(struct uart_port *the_port) -{ - unsigned long port_flags; - struct ioc3_port *port; - struct uart_state *state; - - port = get_ioc3_port(the_port); - if (!port) - return; - - state = the_port->state; - wake_up_interruptible(&state->port.delta_msr_wait); - - spin_lock_irqsave(&the_port->lock, port_flags); - set_notification(port, N_ALL, 0); - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic3_set_mctrl - set control lines (dtr, rts, etc) - * @port: Port to operate on - * @mctrl: Lines to set/unset - * - */ -static void ic3_set_mctrl(struct uart_port *the_port, unsigned int mctrl) -{ - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - set_mcr(the_port, mcr, SHADOW_DTR); -} - -/** - * ic3_get_mctrl - get control line info - * @port: port to operate on - * - */ -static unsigned int ic3_get_mctrl(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - uint32_t shadow; - unsigned int ret = 0; - - if (!port) - return 0; - - shadow = readl(&port->ip_serial_regs->shadow); - if (shadow & SHADOW_DCD) - ret |= TIOCM_CD; - if (shadow & SHADOW_DR) - ret |= TIOCM_DSR; - if (shadow & SHADOW_CTS) - ret |= TIOCM_CTS; - return ret; -} - -/** - * ic3_start_tx - Start transmitter. Called with the_port->lock - * @port: Port to operate on - * - */ -static void ic3_start_tx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) { - set_notification(port, N_OUTPUT_LOWAT, 1); - enable_intrs(port, port->ip_hooks->intr_tx_mt); - } -} - -/** - * ic3_break_ctl - handle breaks - * @port: Port to operate on - * @break_state: Break state - * - */ -static void ic3_break_ctl(struct uart_port *the_port, int break_state) -{ -} - -/** - * ic3_startup - Start up the serial port - always return 0 (We're always on) - * @port: Port to operate on - * - */ -static int ic3_startup(struct uart_port *the_port) -{ - int retval; - struct ioc3_port *port; - struct ioc3_card *card_ptr; - unsigned long port_flags; - - if (!the_port) { - NOT_PROGRESS(); - return -ENODEV; - } - port = get_ioc3_port(the_port); - if (!port) { - NOT_PROGRESS(); - return -ENODEV; - } - card_ptr = port->ip_card; - port->ip_port = the_port; - - if (!card_ptr) { - NOT_PROGRESS(); - return -ENODEV; - } - - /* Start up the serial port */ - spin_lock_irqsave(&the_port->lock, port_flags); - retval = ic3_startup_local(the_port); - spin_unlock_irqrestore(&the_port->lock, port_flags); - return retval; -} - -/** - * ic3_set_termios - set termios stuff - * @port: port to operate on - * @termios: New settings - * @termios: Old - * - */ -static void -ic3_set_termios(struct uart_port *the_port, - struct ktermios *termios, struct ktermios *old_termios) -{ - unsigned long port_flags; - - spin_lock_irqsave(&the_port->lock, port_flags); - ioc3_change_speed(the_port, termios, old_termios); - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic3_request_port - allocate resources for port - no op.... - * @port: port to operate on - * - */ -static int ic3_request_port(struct uart_port *port) -{ - return 0; -} - -/* Associate the uart functions above - given to serial core */ -static struct uart_ops ioc3_ops = { - .tx_empty = ic3_tx_empty, - .set_mctrl = ic3_set_mctrl, - .get_mctrl = ic3_get_mctrl, - .stop_tx = ic3_stop_tx, - .start_tx = ic3_start_tx, - .stop_rx = ic3_stop_rx, - .enable_ms = null_void_function, - .break_ctl = ic3_break_ctl, - .startup = ic3_startup, - .shutdown = ic3_shutdown, - .set_termios = ic3_set_termios, - .type = ic3_type, - .release_port = null_void_function, - .request_port = ic3_request_port, -}; - -/* - * Boot-time initialization code - */ - -static struct uart_driver ioc3_uart = { - .owner = THIS_MODULE, - .driver_name = "ioc3_serial", - .dev_name = DEVICE_NAME, - .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR, - .nr = MAX_LOGICAL_PORTS -}; - -/** - * ioc3_serial_core_attach - register with serial core - * This is done during pci probing - * @is: submodule struct for this - * @idd: handle for this card - */ -static inline int ioc3_serial_core_attach( struct ioc3_submodule *is, - struct ioc3_driver_data *idd) -{ - struct ioc3_port *port; - struct uart_port *the_port; - struct ioc3_card *card_ptr = idd->data[is->id]; - int ii, phys_port; - struct pci_dev *pdev = idd->pdev; - - DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n", - __func__, pdev, (void *)card_ptr)); - - if (!card_ptr) - return -ENODEV; - - /* once around for each logical port on this card */ - for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { - phys_port = GET_PHYSICAL_PORT(ii); - the_port = &card_ptr->ic_port[phys_port]. - icp_uart_port[GET_LOGICAL_PORT(ii)]; - port = card_ptr->ic_port[phys_port].icp_port; - port->ip_port = the_port; - - DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n", - __func__, (void *)the_port, (void *)port, - phys_port, ii)); - - /* membase, iobase and mapbase just need to be non-0 */ - the_port->membase = (unsigned char __iomem *)1; - the_port->iobase = (pdev->bus->number << 16) | ii; - the_port->line = (Num_of_ioc3_cards << 2) | ii; - the_port->mapbase = 1; - the_port->type = PORT_16550A; - the_port->fifosize = FIFO_SIZE; - the_port->ops = &ioc3_ops; - the_port->irq = idd->irq_io; - the_port->dev = &pdev->dev; - - if (uart_add_one_port(&ioc3_uart, the_port) < 0) { - printk(KERN_WARNING - "%s: unable to add port %d bus %d\n", - __func__, the_port->line, pdev->bus->number); - } else { - DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n", - the_port->line, the_port->irq, pdev->bus->number)); - } - - /* all ports are rs232 for now */ - if (IS_PHYSICAL_PORT(ii)) - ioc3_set_proto(port, PROTO_RS232); - } - return 0; -} - -/** - * ioc3uart_remove - register detach function - * @is: submodule struct for this submodule - * @idd: ioc3 driver data for this submodule - */ - -static int ioc3uart_remove(struct ioc3_submodule *is, - struct ioc3_driver_data *idd) -{ - struct ioc3_card *card_ptr = idd->data[is->id]; - struct uart_port *the_port; - struct ioc3_port *port; - int ii; - - if (card_ptr) { - for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { - the_port = &card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. - icp_uart_port[GET_LOGICAL_PORT(ii)]; - if (the_port) - uart_remove_one_port(&ioc3_uart, the_port); - port = card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].icp_port; - if (port && IS_PHYSICAL_PORT(ii) - && (GET_PHYSICAL_PORT(ii) == 0)) { - pci_free_consistent(port->ip_idd->pdev, - TOTAL_RING_BUF_SIZE, - (void *)port->ip_cpu_ringbuf, - port->ip_dma_ringbuf); - kfree(port); - card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. - icp_port = NULL; - } - } - kfree(card_ptr); - idd->data[is->id] = NULL; - } - return 0; -} - -/** - * ioc3uart_probe - card probe function called from shim driver - * @is: submodule struct for this submodule - * @idd: ioc3 driver data for this card - */ - -static int __devinit -ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) -{ - struct pci_dev *pdev = idd->pdev; - struct ioc3_card *card_ptr; - int ret = 0; - struct ioc3_port *port; - struct ioc3_port *ports[PORTS_PER_CARD]; - int phys_port; - int cnt; - - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd)); - - card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL); - if (!card_ptr) { - printk(KERN_WARNING "ioc3_attach_one" - ": unable to get memory for the IOC3\n"); - return -ENOMEM; - } - idd->data[is->id] = card_ptr; - Submodule_slot = is->id; - - writel(((UARTA_BASE >> 3) << SIO_CR_SER_A_BASE_SHIFT) | - ((UARTB_BASE >> 3) << SIO_CR_SER_B_BASE_SHIFT) | - (0xf << SIO_CR_CMD_PULSE_SHIFT), &idd->vma->sio_cr); - - pci_write_config_dword(pdev, PCI_LAT, 0xff00); - - /* Enable serial port mode select generic PIO pins as outputs */ - ioc3_gpcr_set(idd, GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL); - - /* Create port structures for each port */ - for (phys_port = 0; phys_port < PORTS_PER_CARD; phys_port++) { - port = kzalloc(sizeof(struct ioc3_port), GFP_KERNEL); - if (!port) { - printk(KERN_WARNING - "IOC3 serial memory not available for port\n"); - ret = -ENOMEM; - goto out4; - } - spin_lock_init(&port->ip_lock); - - /* we need to remember the previous ones, to point back to - * them farther down - setting up the ring buffers. - */ - ports[phys_port] = port; - - /* init to something useful */ - card_ptr->ic_port[phys_port].icp_port = port; - port->ip_is = is; - port->ip_idd = idd; - port->ip_baud = 9600; - port->ip_card = card_ptr; - port->ip_hooks = &hooks_array[phys_port]; - - /* Setup each port */ - if (phys_port == 0) { - port->ip_serial_regs = &idd->vma->port_a; - port->ip_uart_regs = &idd->vma->sregs.uarta; - - DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p " - "ip_uart_regs 0x%p\n", - __func__, - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* setup ring buffers */ - port->ip_cpu_ringbuf = pci_alloc_consistent(pdev, - TOTAL_RING_BUF_SIZE, &port->ip_dma_ringbuf); - - BUG_ON(!((((int64_t) port->ip_dma_ringbuf) & - (TOTAL_RING_BUF_SIZE - 1)) == 0)); - port->ip_inring = RING(port, RX_A); - port->ip_outring = RING(port, TX_A); - DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p " - "ip_dma_ringbuf 0x%p, ip_inring 0x%p " - "ip_outring 0x%p\n", - __func__, - (void *)port->ip_cpu_ringbuf, - (void *)port->ip_dma_ringbuf, - (void *)port->ip_inring, - (void *)port->ip_outring)); - } - else { - port->ip_serial_regs = &idd->vma->port_b; - port->ip_uart_regs = &idd->vma->sregs.uartb; - - DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p " - "ip_uart_regs 0x%p\n", - __func__, - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* share the ring buffers */ - port->ip_dma_ringbuf = - ports[phys_port - 1]->ip_dma_ringbuf; - port->ip_cpu_ringbuf = - ports[phys_port - 1]->ip_cpu_ringbuf; - port->ip_inring = RING(port, RX_B); - port->ip_outring = RING(port, TX_B); - DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p " - "ip_dma_ringbuf 0x%p, ip_inring 0x%p " - "ip_outring 0x%p\n", - __func__, - (void *)port->ip_cpu_ringbuf, - (void *)port->ip_dma_ringbuf, - (void *)port->ip_inring, - (void *)port->ip_outring)); - } - - DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p", - __func__, - phys_port, (void *)port, (void *)card_ptr)); - DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* Initialize the hardware for IOC3 */ - port_init(port); - - DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p " - "outring 0x%p\n", - __func__, - phys_port, (void *)port, - (void *)port->ip_inring, - (void *)port->ip_outring)); - - } - - /* register port with the serial core */ - - if ((ret = ioc3_serial_core_attach(is, idd))) - goto out4; - - Num_of_ioc3_cards++; - - return ret; - - /* error exits that give back resources */ -out4: - for (cnt = 0; cnt < phys_port; cnt++) - kfree(ports[cnt]); - - kfree(card_ptr); - return ret; -} - -static struct ioc3_submodule ioc3uart_ops = { - .name = "IOC3uart", - .probe = ioc3uart_probe, - .remove = ioc3uart_remove, - /* call .intr for both ports initially */ - .irq_mask = SIO_IR_SA | SIO_IR_SB, - .intr = ioc3uart_intr, - .owner = THIS_MODULE, -}; - -/** - * ioc3_detect - module init called, - */ -static int __init ioc3uart_init(void) -{ - int ret; - - /* register with serial core */ - if ((ret = uart_register_driver(&ioc3_uart)) < 0) { - printk(KERN_WARNING - "%s: Couldn't register IOC3 uart serial driver\n", - __func__); - return ret; - } - ret = ioc3_register_submodule(&ioc3uart_ops); - if (ret) - uart_unregister_driver(&ioc3_uart); - return ret; -} - -static void __exit ioc3uart_exit(void) -{ - ioc3_unregister_submodule(&ioc3uart_ops); - uart_unregister_driver(&ioc3_uart); -} - -module_init(ioc3uart_init); -module_exit(ioc3uart_exit); - -MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); -MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC3 card"); -MODULE_LICENSE("GPL"); -- cgit v1.2.3