From ab4382d27412e7e3e7c936e8d50d8888dfac3df8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 13 Jan 2011 12:10:18 -0800 Subject: tty: move drivers/serial/ to drivers/tty/serial/ The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann Cc: Alan Cox Cc: Geert Uytterhoeven Cc: Rogier Wolff Cc: Michael H. Warfield Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_txx9.c | 1344 ------------------------------------------ 1 file changed, 1344 deletions(-) delete mode 100644 drivers/serial/serial_txx9.c (limited to 'drivers/serial/serial_txx9.c') diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c deleted file mode 100644 index c50e9fbbf743..000000000000 --- a/drivers/serial/serial_txx9.c +++ /dev/null @@ -1,1344 +0,0 @@ -/* - * drivers/serial/serial_txx9.c - * - * Derived from many drivers using generic_serial interface, - * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c - * (was in Linux/VR tree) by Jim Pick. - * - * Copyright (C) 1999 Harald Koerfgen - * Copyright (C) 2000 Jim Pick - * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) - * Copyright (C) 2000-2002 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller - */ - -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static char *serial_version = "1.11"; -static char *serial_name = "TX39/49 Serial driver"; - -#define PASS_LIMIT 256 - -#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) -/* "ttyS" is used for standard serial driver */ -#define TXX9_TTY_NAME "ttyTX" -#define TXX9_TTY_MINOR_START 196 -#define TXX9_TTY_MAJOR 204 -#else -/* acts like standard serial driver */ -#define TXX9_TTY_NAME "ttyS" -#define TXX9_TTY_MINOR_START 64 -#define TXX9_TTY_MAJOR TTY_MAJOR -#endif - -/* flag aliases */ -#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART -#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER - -#ifdef CONFIG_PCI -/* support for Toshiba TC86C001 SIO */ -#define ENABLE_SERIAL_TXX9_PCI -#endif - -/* - * Number of serial ports - */ -#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS - -struct uart_txx9_port { - struct uart_port port; - /* No additional info for now */ -}; - -#define TXX9_REGION_SIZE 0x24 - -/* TXX9 Serial Registers */ -#define TXX9_SILCR 0x00 -#define TXX9_SIDICR 0x04 -#define TXX9_SIDISR 0x08 -#define TXX9_SICISR 0x0c -#define TXX9_SIFCR 0x10 -#define TXX9_SIFLCR 0x14 -#define TXX9_SIBGR 0x18 -#define TXX9_SITFIFO 0x1c -#define TXX9_SIRFIFO 0x20 - -/* SILCR : Line Control */ -#define TXX9_SILCR_SCS_MASK 0x00000060 -#define TXX9_SILCR_SCS_IMCLK 0x00000000 -#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 -#define TXX9_SILCR_SCS_SCLK 0x00000040 -#define TXX9_SILCR_SCS_SCLK_BG 0x00000060 -#define TXX9_SILCR_UEPS 0x00000010 -#define TXX9_SILCR_UPEN 0x00000008 -#define TXX9_SILCR_USBL_MASK 0x00000004 -#define TXX9_SILCR_USBL_1BIT 0x00000000 -#define TXX9_SILCR_USBL_2BIT 0x00000004 -#define TXX9_SILCR_UMODE_MASK 0x00000003 -#define TXX9_SILCR_UMODE_8BIT 0x00000000 -#define TXX9_SILCR_UMODE_7BIT 0x00000001 - -/* SIDICR : DMA/Int. Control */ -#define TXX9_SIDICR_TDE 0x00008000 -#define TXX9_SIDICR_RDE 0x00004000 -#define TXX9_SIDICR_TIE 0x00002000 -#define TXX9_SIDICR_RIE 0x00001000 -#define TXX9_SIDICR_SPIE 0x00000800 -#define TXX9_SIDICR_CTSAC 0x00000600 -#define TXX9_SIDICR_STIE_MASK 0x0000003f -#define TXX9_SIDICR_STIE_OERS 0x00000020 -#define TXX9_SIDICR_STIE_CTSS 0x00000010 -#define TXX9_SIDICR_STIE_RBRKD 0x00000008 -#define TXX9_SIDICR_STIE_TRDY 0x00000004 -#define TXX9_SIDICR_STIE_TXALS 0x00000002 -#define TXX9_SIDICR_STIE_UBRKD 0x00000001 - -/* SIDISR : DMA/Int. Status */ -#define TXX9_SIDISR_UBRK 0x00008000 -#define TXX9_SIDISR_UVALID 0x00004000 -#define TXX9_SIDISR_UFER 0x00002000 -#define TXX9_SIDISR_UPER 0x00001000 -#define TXX9_SIDISR_UOER 0x00000800 -#define TXX9_SIDISR_ERI 0x00000400 -#define TXX9_SIDISR_TOUT 0x00000200 -#define TXX9_SIDISR_TDIS 0x00000100 -#define TXX9_SIDISR_RDIS 0x00000080 -#define TXX9_SIDISR_STIS 0x00000040 -#define TXX9_SIDISR_RFDN_MASK 0x0000001f - -/* SICISR : Change Int. Status */ -#define TXX9_SICISR_OERS 0x00000020 -#define TXX9_SICISR_CTSS 0x00000010 -#define TXX9_SICISR_RBRKD 0x00000008 -#define TXX9_SICISR_TRDY 0x00000004 -#define TXX9_SICISR_TXALS 0x00000002 -#define TXX9_SICISR_UBRKD 0x00000001 - -/* SIFCR : FIFO Control */ -#define TXX9_SIFCR_SWRST 0x00008000 -#define TXX9_SIFCR_RDIL_MASK 0x00000180 -#define TXX9_SIFCR_RDIL_1 0x00000000 -#define TXX9_SIFCR_RDIL_4 0x00000080 -#define TXX9_SIFCR_RDIL_8 0x00000100 -#define TXX9_SIFCR_RDIL_12 0x00000180 -#define TXX9_SIFCR_RDIL_MAX 0x00000180 -#define TXX9_SIFCR_TDIL_MASK 0x00000018 -#define TXX9_SIFCR_TDIL_MASK 0x00000018 -#define TXX9_SIFCR_TDIL_1 0x00000000 -#define TXX9_SIFCR_TDIL_4 0x00000001 -#define TXX9_SIFCR_TDIL_8 0x00000010 -#define TXX9_SIFCR_TDIL_MAX 0x00000010 -#define TXX9_SIFCR_TFRST 0x00000004 -#define TXX9_SIFCR_RFRST 0x00000002 -#define TXX9_SIFCR_FRSTE 0x00000001 -#define TXX9_SIO_TX_FIFO 8 -#define TXX9_SIO_RX_FIFO 16 - -/* SIFLCR : Flow Control */ -#define TXX9_SIFLCR_RCS 0x00001000 -#define TXX9_SIFLCR_TES 0x00000800 -#define TXX9_SIFLCR_RTSSC 0x00000200 -#define TXX9_SIFLCR_RSDE 0x00000100 -#define TXX9_SIFLCR_TSDE 0x00000080 -#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e -#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e -#define TXX9_SIFLCR_TBRK 0x00000001 - -/* SIBGR : Baudrate Control */ -#define TXX9_SIBGR_BCLK_MASK 0x00000300 -#define TXX9_SIBGR_BCLK_T0 0x00000000 -#define TXX9_SIBGR_BCLK_T2 0x00000100 -#define TXX9_SIBGR_BCLK_T4 0x00000200 -#define TXX9_SIBGR_BCLK_T6 0x00000300 -#define TXX9_SIBGR_BRD_MASK 0x000000ff - -static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) -{ - switch (up->port.iotype) { - default: - return __raw_readl(up->port.membase + offset); - case UPIO_PORT: - return inl(up->port.iobase + offset); - } -} - -static inline void -sio_out(struct uart_txx9_port *up, int offset, int value) -{ - switch (up->port.iotype) { - default: - __raw_writel(value, up->port.membase + offset); - break; - case UPIO_PORT: - outl(value, up->port.iobase + offset); - break; - } -} - -static inline void -sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) -{ - sio_out(up, offset, sio_in(up, offset) & ~value); -} -static inline void -sio_set(struct uart_txx9_port *up, int offset, unsigned int value) -{ - sio_out(up, offset, sio_in(up, offset) | value); -} - -static inline void -sio_quot_set(struct uart_txx9_port *up, int quot) -{ - quot >>= 1; - if (quot < 256) - sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); - else if (quot < (256 << 2)) - sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); - else if (quot < (256 << 4)) - sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); - else if (quot < (256 << 6)) - sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); - else - sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); -} - -static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) -{ - return container_of(port, struct uart_txx9_port, port); -} - -static void serial_txx9_stop_tx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); -} - -static void serial_txx9_start_tx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); -} - -static void serial_txx9_stop_rx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; -} - -static void serial_txx9_enable_ms(struct uart_port *port) -{ - /* TXX9-SIO can not control DTR... */ -} - -static void serial_txx9_initialize(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int tmout = 10000; - - sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); - /* TX4925 BUG WORKAROUND. Accessing SIOC register - * immediately after soft reset causes bus error. */ - mmiowb(); - udelay(1); - while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) - udelay(1); - /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); - /* initial settings */ - sio_out(up, TXX9_SILCR, - TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | - ((up->port.flags & UPF_TXX9_USE_SCLK) ? - TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); - sio_quot_set(up, uart_get_divisor(port, 9600)); - sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); - sio_out(up, TXX9_SIDICR, 0); -} - -static inline void -receive_chars(struct uart_txx9_port *up, unsigned int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch; - unsigned int disr = *status; - int max_count = 256; - char flag; - unsigned int next_ignore_status_mask; - - do { - ch = sio_in(up, TXX9_SIRFIFO); - flag = TTY_NORMAL; - up->port.icount.rx++; - - /* mask out RFDN_MASK bit added by previous overrun */ - next_ignore_status_mask = - up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; - if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | - TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { - /* - * For statistics only - */ - if (disr & TXX9_SIDISR_UBRK) { - disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (disr & TXX9_SIDISR_UPER) - up->port.icount.parity++; - else if (disr & TXX9_SIDISR_UFER) - up->port.icount.frame++; - if (disr & TXX9_SIDISR_UOER) { - up->port.icount.overrun++; - /* - * The receiver read buffer still hold - * a char which caused overrun. - * Ignore next char by adding RFDN_MASK - * to ignore_status_mask temporarily. - */ - next_ignore_status_mask |= - TXX9_SIDISR_RFDN_MASK; - } - - /* - * Mask off conditions which should be ingored. - */ - disr &= up->port.read_status_mask; - - if (disr & TXX9_SIDISR_UBRK) { - flag = TTY_BREAK; - } else if (disr & TXX9_SIDISR_UPER) - flag = TTY_PARITY; - else if (disr & TXX9_SIDISR_UFER) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); - - ignore_char: - up->port.ignore_status_mask = next_ignore_status_mask; - disr = sio_in(up, TXX9_SIDISR); - } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); - *status = disr; -} - -static inline void transmit_chars(struct uart_txx9_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - sio_out(up, TXX9_SITFIFO, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_txx9_stop_tx(&up->port); - return; - } - - count = TXX9_SIO_TX_FIFO; - do { - sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - serial_txx9_stop_tx(&up->port); -} - -static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) -{ - int pass_counter = 0; - struct uart_txx9_port *up = dev_id; - unsigned int status; - - while (1) { - spin_lock(&up->port.lock); - status = sio_in(up, TXX9_SIDISR); - if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) - status &= ~TXX9_SIDISR_TDIS; - if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | - TXX9_SIDISR_TOUT))) { - spin_unlock(&up->port.lock); - break; - } - - if (status & TXX9_SIDISR_RDIS) - receive_chars(up, &status); - if (status & TXX9_SIDISR_TDIS) - transmit_chars(up); - /* Clear TX/RX Int. Status */ - sio_mask(up, TXX9_SIDISR, - TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | - TXX9_SIDISR_TOUT); - spin_unlock(&up->port.lock); - - if (pass_counter++ > PASS_LIMIT) - break; - } - - return pass_counter ? IRQ_HANDLED : IRQ_NONE; -} - -static unsigned int serial_txx9_tx_empty(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_txx9_get_mctrl(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int ret; - - /* no modem control lines */ - ret = TIOCM_CAR | TIOCM_DSR; - ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; - ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; - - return ret; -} - -static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - - if (mctrl & TIOCM_RTS) - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); - else - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); -} - -static void serial_txx9_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - else - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) -/* - * Wait for transmitter & holding register to empty - */ -static void wait_for_xmitr(struct uart_txx9_port *up) -{ - unsigned int tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - while (--tmout && - !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) - udelay(1); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) - udelay(1); - } -} -#endif - -#ifdef CONFIG_CONSOLE_POLL -/* - * Console polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -static int serial_txx9_get_poll_char(struct uart_port *port) -{ - unsigned int ier; - unsigned char c; - struct uart_txx9_port *up = to_uart_txx9_port(port); - - /* - * First save the IER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - - while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) - ; - - c = sio_in(up, TXX9_SIRFIFO); - - /* - * Finally, clear RX interrupt status - * and restore the IER - */ - sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); - sio_out(up, TXX9_SIDICR, ier); - return c; -} - - -static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) -{ - unsigned int ier; - struct uart_txx9_port *up = to_uart_txx9_port(port); - - /* - * First save the IER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - - wait_for_xmitr(up); - /* - * Send the character out. - * If a LF, also do CR... - */ - sio_out(up, TXX9_SITFIFO, c); - if (c == 10) { - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, 13); - } - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, TXX9_SIDICR, ier); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static int serial_txx9_startup(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - int retval; - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - /* clear reset */ - sio_mask(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - sio_out(up, TXX9_SIDICR, 0); - - /* - * Clear the interrupt registers. - */ - sio_out(up, TXX9_SIDISR, 0); - - retval = request_irq(up->port.irq, serial_txx9_interrupt, - IRQF_SHARED, "serial_txx9", up); - if (retval) - return retval; - - /* - * Now, initialize the UART - */ - spin_lock_irqsave(&up->port.lock, flags); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* Enable RX/TX */ - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); - - /* - * Finally, enable interrupts. - */ - sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); - - return 0; -} - -static void serial_txx9_shutdown(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - - /* - * Disable interrupts from this port - */ - sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ - - spin_lock_irqsave(&up->port.lock, flags); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition - */ - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - if (up->port.cons && up->port.line == up->port.cons->index) { - free_irq(up->port.irq, up); - return; - } -#endif - /* reset FIFOs */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - /* clear reset */ - sio_mask(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - - /* Disable RX/TX */ - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); - - free_irq(up->port.irq, up); -} - -static void -serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - - /* - * We don't support modem control lines. - */ - termios->c_cflag &= ~(HUPCL | CMSPAR); - termios->c_cflag |= CLOCAL; - - cval = sio_in(up, TXX9_SILCR); - /* byte size and parity */ - cval &= ~TXX9_SILCR_UMODE_MASK; - switch (termios->c_cflag & CSIZE) { - case CS7: - cval |= TXX9_SILCR_UMODE_7BIT; - break; - default: - case CS5: /* not supported */ - case CS6: /* not supported */ - case CS8: - cval |= TXX9_SILCR_UMODE_8BIT; - break; - } - - cval &= ~TXX9_SILCR_USBL_MASK; - if (termios->c_cflag & CSTOPB) - cval |= TXX9_SILCR_USBL_2BIT; - else - cval |= TXX9_SILCR_USBL_1BIT; - cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); - if (termios->c_cflag & PARENB) - cval |= TXX9_SILCR_UPEN; - if (!(termios->c_cflag & PARODD)) - cval |= TXX9_SILCR_UEPS; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); - quot = uart_get_divisor(port, baud); - - /* Set up FIFOs */ - /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ - fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = TXX9_SIDISR_UOER | - TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= TXX9_SIDISR_UBRK; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= TXX9_SIDISR_UOER; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; - - /* CTS flow control flag */ - if ((termios->c_cflag & CRTSCTS) && - (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { - sio_set(up, TXX9_SIFLCR, - TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); - } else { - sio_mask(up, TXX9_SIFLCR, - TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); - } - - sio_out(up, TXX9_SILCR, cval); - sio_quot_set(up, quot); - sio_out(up, TXX9_SIFCR, fcr); - - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -serial_txx9_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - /* - * If oldstate was -1 this is called from - * uart_configure_port(). In this case do not initialize the - * port now, because the port was already initialized (for - * non-console port) or should not be initialized here (for - * console port). If we initialized the port here we lose - * serial console settings. - */ - if (state == 0 && oldstate != -1) - serial_txx9_initialize(port); -} - -static int serial_txx9_request_resource(struct uart_txx9_port *up) -{ - unsigned int size = TXX9_REGION_SIZE; - int ret = 0; - - switch (up->port.iotype) { - default: - if (!up->port.mapbase) - break; - - if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { - ret = -EBUSY; - break; - } - - if (up->port.flags & UPF_IOREMAP) { - up->port.membase = ioremap(up->port.mapbase, size); - if (!up->port.membase) { - release_mem_region(up->port.mapbase, size); - ret = -ENOMEM; - } - } - break; - - case UPIO_PORT: - if (!request_region(up->port.iobase, size, "serial_txx9")) - ret = -EBUSY; - break; - } - return ret; -} - -static void serial_txx9_release_resource(struct uart_txx9_port *up) -{ - unsigned int size = TXX9_REGION_SIZE; - - switch (up->port.iotype) { - default: - if (!up->port.mapbase) - break; - - if (up->port.flags & UPF_IOREMAP) { - iounmap(up->port.membase); - up->port.membase = NULL; - } - - release_mem_region(up->port.mapbase, size); - break; - - case UPIO_PORT: - release_region(up->port.iobase, size); - break; - } -} - -static void serial_txx9_release_port(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - serial_txx9_release_resource(up); -} - -static int serial_txx9_request_port(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - return serial_txx9_request_resource(up); -} - -static void serial_txx9_config_port(struct uart_port *port, int uflags) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - int ret; - - /* - * Find the region that we can probe for. This in turn - * tells us whether we can probe for the type of port. - */ - ret = serial_txx9_request_resource(up); - if (ret < 0) - return; - port->type = PORT_TXX9; - up->port.fifosize = TXX9_SIO_TX_FIFO; - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - if (up->port.line == up->port.cons->index) - return; -#endif - serial_txx9_initialize(port); -} - -static const char * -serial_txx9_type(struct uart_port *port) -{ - return "txx9"; -} - -static struct uart_ops serial_txx9_pops = { - .tx_empty = serial_txx9_tx_empty, - .set_mctrl = serial_txx9_set_mctrl, - .get_mctrl = serial_txx9_get_mctrl, - .stop_tx = serial_txx9_stop_tx, - .start_tx = serial_txx9_start_tx, - .stop_rx = serial_txx9_stop_rx, - .enable_ms = serial_txx9_enable_ms, - .break_ctl = serial_txx9_break_ctl, - .startup = serial_txx9_startup, - .shutdown = serial_txx9_shutdown, - .set_termios = serial_txx9_set_termios, - .pm = serial_txx9_pm, - .type = serial_txx9_type, - .release_port = serial_txx9_release_port, - .request_port = serial_txx9_request_port, - .config_port = serial_txx9_config_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = serial_txx9_get_poll_char, - .poll_put_char = serial_txx9_put_poll_char, -#endif -}; - -static struct uart_txx9_port serial_txx9_ports[UART_NR]; - -static void __init serial_txx9_register_ports(struct uart_driver *drv, - struct device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - up->port.line = i; - up->port.ops = &serial_txx9_pops; - up->port.dev = dev; - if (up->port.iobase || up->port.mapbase) - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - -static void serial_txx9_console_putchar(struct uart_port *port, int ch) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial_txx9_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_txx9_port *up = &serial_txx9_ports[co->index]; - unsigned int ier, flcr; - - /* - * First save the UER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - /* - * Disable flow-control if enabled (and unnecessary) - */ - flcr = sio_in(up, TXX9_SIFLCR); - if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) - sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); - - uart_console_write(&up->port, s, count, serial_txx9_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, TXX9_SIFLCR, flcr); - sio_out(up, TXX9_SIDICR, ier); -} - -static int __init serial_txx9_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - struct uart_txx9_port *up; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - up = &serial_txx9_ports[co->index]; - port = &up->port; - if (!port->ops) - return -ENODEV; - - serial_txx9_initialize(&up->port); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver serial_txx9_reg; -static struct console serial_txx9_console = { - .name = TXX9_TTY_NAME, - .write = serial_txx9_console_write, - .device = uart_console_device, - .setup = serial_txx9_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_txx9_reg, -}; - -static int __init serial_txx9_console_init(void) -{ - register_console(&serial_txx9_console); - return 0; -} -console_initcall(serial_txx9_console_init); - -#define SERIAL_TXX9_CONSOLE &serial_txx9_console -#else -#define SERIAL_TXX9_CONSOLE NULL -#endif - -static struct uart_driver serial_txx9_reg = { - .owner = THIS_MODULE, - .driver_name = "serial_txx9", - .dev_name = TXX9_TTY_NAME, - .major = TXX9_TTY_MAJOR, - .minor = TXX9_TTY_MINOR_START, - .nr = UART_NR, - .cons = SERIAL_TXX9_CONSOLE, -}; - -int __init early_serial_txx9_setup(struct uart_port *port) -{ - if (port->line >= ARRAY_SIZE(serial_txx9_ports)) - return -ENODEV; - - serial_txx9_ports[port->line].port = *port; - serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; - serial_txx9_ports[port->line].port.flags |= - UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; - return 0; -} - -static DEFINE_MUTEX(serial_txx9_mutex); - -/** - * serial_txx9_register_port - register a serial port - * @port: serial port template - * - * Configure the serial port specified by the request. - * - * The port is then probed and if necessary the IRQ is autodetected - * If this fails an error is returned. - * - * On success the port is ready to use and the line number is returned. - */ -static int __devinit serial_txx9_register_port(struct uart_port *port) -{ - int i; - struct uart_txx9_port *uart; - int ret = -ENOSPC; - - mutex_lock(&serial_txx9_mutex); - for (i = 0; i < UART_NR; i++) { - uart = &serial_txx9_ports[i]; - if (uart_match_port(&uart->port, port)) { - uart_remove_one_port(&serial_txx9_reg, &uart->port); - break; - } - } - if (i == UART_NR) { - /* Find unused port */ - for (i = 0; i < UART_NR; i++) { - uart = &serial_txx9_ports[i]; - if (!(uart->port.iobase || uart->port.mapbase)) - break; - } - } - if (i < UART_NR) { - uart->port.iobase = port->iobase; - uart->port.membase = port->membase; - uart->port.irq = port->irq; - uart->port.uartclk = port->uartclk; - uart->port.iotype = port->iotype; - uart->port.flags = port->flags - | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; - uart->port.mapbase = port->mapbase; - if (port->dev) - uart->port.dev = port->dev; - ret = uart_add_one_port(&serial_txx9_reg, &uart->port); - if (ret == 0) - ret = uart->port.line; - } - mutex_unlock(&serial_txx9_mutex); - return ret; -} - -/** - * serial_txx9_unregister_port - remove a txx9 serial port at runtime - * @line: serial line number - * - * Remove one serial port. This may not be called from interrupt - * context. We hand the port back to the our control. - */ -static void __devexit serial_txx9_unregister_port(int line) -{ - struct uart_txx9_port *uart = &serial_txx9_ports[line]; - - mutex_lock(&serial_txx9_mutex); - uart_remove_one_port(&serial_txx9_reg, &uart->port); - uart->port.flags = 0; - uart->port.type = PORT_UNKNOWN; - uart->port.iobase = 0; - uart->port.mapbase = 0; - uart->port.membase = NULL; - uart->port.dev = NULL; - mutex_unlock(&serial_txx9_mutex); -} - -/* - * Register a set of serial devices attached to a platform device. - */ -static int __devinit serial_txx9_probe(struct platform_device *dev) -{ - struct uart_port *p = dev->dev.platform_data; - struct uart_port port; - int ret, i; - - memset(&port, 0, sizeof(struct uart_port)); - for (i = 0; p && p->uartclk != 0; p++, i++) { - port.iobase = p->iobase; - port.membase = p->membase; - port.irq = p->irq; - port.uartclk = p->uartclk; - port.iotype = p->iotype; - port.flags = p->flags; - port.mapbase = p->mapbase; - port.dev = &dev->dev; - ret = serial_txx9_register_port(&port); - if (ret < 0) { - dev_err(&dev->dev, "unable to register port at index %d " - "(IO%lx MEM%llx IRQ%d): %d\n", i, - p->iobase, (unsigned long long)p->mapbase, - p->irq, ret); - } - } - return 0; -} - -/* - * Remove serial ports registered against a platform device. - */ -static int __devexit serial_txx9_remove(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.dev == &dev->dev) - serial_txx9_unregister_port(i); - } - return 0; -} - -#ifdef CONFIG_PM -static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_suspend_port(&serial_txx9_reg, &up->port); - } - - return 0; -} - -static int serial_txx9_resume(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_resume_port(&serial_txx9_reg, &up->port); - } - - return 0; -} -#endif - -static struct platform_driver serial_txx9_plat_driver = { - .probe = serial_txx9_probe, - .remove = __devexit_p(serial_txx9_remove), -#ifdef CONFIG_PM - .suspend = serial_txx9_suspend, - .resume = serial_txx9_resume, -#endif - .driver = { - .name = "serial_txx9", - .owner = THIS_MODULE, - }, -}; - -#ifdef ENABLE_SERIAL_TXX9_PCI -/* - * Probe one serial board. Unfortunately, there is no rhyme nor reason - * to the arrangement of serial ports on a PCI card. - */ -static int __devinit -pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) -{ - struct uart_port port; - int line; - int rc; - - rc = pci_enable_device(dev); - if (rc) - return rc; - - memset(&port, 0, sizeof(port)); - port.ops = &serial_txx9_pops; - port.flags |= UPF_TXX9_HAVE_CTS_LINE; - port.uartclk = 66670000; - port.irq = dev->irq; - port.iotype = UPIO_PORT; - port.iobase = pci_resource_start(dev, 1); - port.dev = &dev->dev; - line = serial_txx9_register_port(&port); - if (line < 0) { - printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); - pci_disable_device(dev); - return line; - } - pci_set_drvdata(dev, &serial_txx9_ports[line]); - - return 0; -} - -static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - pci_set_drvdata(dev, NULL); - - if (up) { - serial_txx9_unregister_port(up->port.line); - pci_disable_device(dev); - } -} - -#ifdef CONFIG_PM -static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - if (up) - uart_suspend_port(&serial_txx9_reg, &up->port); - pci_save_state(dev); - pci_set_power_state(dev, pci_choose_state(dev, state)); - return 0; -} - -static int pciserial_txx9_resume_one(struct pci_dev *dev) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - pci_set_power_state(dev, PCI_D0); - pci_restore_state(dev); - if (up) - uart_resume_port(&serial_txx9_reg, &up->port); - return 0; -} -#endif - -static const struct pci_device_id serial_txx9_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) }, - { 0, } -}; - -static struct pci_driver serial_txx9_pci_driver = { - .name = "serial_txx9", - .probe = pciserial_txx9_init_one, - .remove = __devexit_p(pciserial_txx9_remove_one), -#ifdef CONFIG_PM - .suspend = pciserial_txx9_suspend_one, - .resume = pciserial_txx9_resume_one, -#endif - .id_table = serial_txx9_pci_tbl, -}; - -MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); -#endif /* ENABLE_SERIAL_TXX9_PCI */ - -static struct platform_device *serial_txx9_plat_devs; - -static int __init serial_txx9_init(void) -{ - int ret; - - printk(KERN_INFO "%s version %s\n", serial_name, serial_version); - - ret = uart_register_driver(&serial_txx9_reg); - if (ret) - goto out; - - serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); - if (!serial_txx9_plat_devs) { - ret = -ENOMEM; - goto unreg_uart_drv; - } - - ret = platform_device_add(serial_txx9_plat_devs); - if (ret) - goto put_dev; - - serial_txx9_register_ports(&serial_txx9_reg, - &serial_txx9_plat_devs->dev); - - ret = platform_driver_register(&serial_txx9_plat_driver); - if (ret) - goto del_dev; - -#ifdef ENABLE_SERIAL_TXX9_PCI - ret = pci_register_driver(&serial_txx9_pci_driver); -#endif - if (ret == 0) - goto out; - - del_dev: - platform_device_del(serial_txx9_plat_devs); - put_dev: - platform_device_put(serial_txx9_plat_devs); - unreg_uart_drv: - uart_unregister_driver(&serial_txx9_reg); - out: - return ret; -} - -static void __exit serial_txx9_exit(void) -{ - int i; - -#ifdef ENABLE_SERIAL_TXX9_PCI - pci_unregister_driver(&serial_txx9_pci_driver); -#endif - platform_driver_unregister(&serial_txx9_plat_driver); - platform_device_unregister(serial_txx9_plat_devs); - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - if (up->port.iobase || up->port.mapbase) - uart_remove_one_port(&serial_txx9_reg, &up->port); - } - - uart_unregister_driver(&serial_txx9_reg); -} - -module_init(serial_txx9_init); -module_exit(serial_txx9_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("TX39/49 serial driver"); - -MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); -- cgit v1.2.3