From 936f14cf4e67168fcd37f10cebf5a475f490fb6e Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 27 Jul 2015 20:20:32 -0700 Subject: soc: qcom: Driver for the Qualcomm RPM over SMD Driver for the Resource Power Manager (RPM) found in Qualcomm 8974 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- drivers/soc/qcom/Kconfig | 14 +++ drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/smd-rpm.c | 244 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 259 insertions(+) create mode 100644 drivers/soc/qcom/smd-rpm.c (limited to 'drivers/soc') diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 188295e2c9ba..ba47b70f4d85 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -27,6 +27,20 @@ config QCOM_SMD providing communication channels to remote processors in Qualcomm platforms. +config QCOM_SMD_RPM + tristate "Qualcomm Resource Power Manager (RPM) over SMD" + depends on QCOM_SMD && OF + help + If you say yes to this option, support will be included for the + Resource Power Manager system found in the Qualcomm 8974 based + devices. + + This is required to access many regulators, clocks and bus + frequencies controlled by the RPM on these devices. + + Say M here if you want to include support for the Qualcomm RPM as a + module. This will build a module called "qcom-smd-rpm". + config QCOM_SMEM tristate "Qualcomm Shared Memory Manager (SMEM)" depends on ARCH_QCOM diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index f961a8796ed2..10a93d168e0e 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o obj-$(CONFIG_QCOM_PM) += spm.o obj-$(CONFIG_QCOM_SMD) += smd.o +obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o obj-$(CONFIG_QCOM_SMEM) += smem.o diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c new file mode 100644 index 000000000000..1392ccf14a20 --- /dev/null +++ b/drivers/soc/qcom/smd-rpm.c @@ -0,0 +1,244 @@ +/* + * Copyright (c) 2015, Sony Mobile Communications AB. + * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#define RPM_REQUEST_TIMEOUT (5 * HZ) + +/** + * struct qcom_smd_rpm - state of the rpm device driver + * @rpm_channel: reference to the smd channel + * @ack: completion for acks + * @lock: mutual exclusion around the send/complete pair + * @ack_status: result of the rpm request + */ +struct qcom_smd_rpm { + struct qcom_smd_channel *rpm_channel; + + struct completion ack; + struct mutex lock; + int ack_status; +}; + +/** + * struct qcom_rpm_header - header for all rpm requests and responses + * @service_type: identifier of the service + * @length: length of the payload + */ +struct qcom_rpm_header { + u32 service_type; + u32 length; +}; + +/** + * struct qcom_rpm_request - request message to the rpm + * @msg_id: identifier of the outgoing message + * @flags: active/sleep state flags + * @type: resource type + * @id: resource id + * @data_len: length of the payload following this header + */ +struct qcom_rpm_request { + u32 msg_id; + u32 flags; + u32 type; + u32 id; + u32 data_len; +}; + +/** + * struct qcom_rpm_message - response message from the rpm + * @msg_type: indicator of the type of message + * @length: the size of this message, including the message header + * @msg_id: message id + * @message: textual message from the rpm + * + * Multiple of these messages can be stacked in an rpm message. + */ +struct qcom_rpm_message { + u32 msg_type; + u32 length; + union { + u32 msg_id; + u8 message[0]; + }; +}; + +#define RPM_SERVICE_TYPE_REQUEST 0x00716572 /* "req\0" */ + +#define RPM_MSG_TYPE_ERR 0x00727265 /* "err\0" */ +#define RPM_MSG_TYPE_MSG_ID 0x2367736d /* "msg#" */ + +/** + * qcom_rpm_smd_write - write @buf to @type:@id + * @rpm: rpm handle + * @type: resource type + * @id: resource identifier + * @buf: the data to be written + * @count: number of bytes in @buf + */ +int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm, + int state, + u32 type, u32 id, + void *buf, + size_t count) +{ + static unsigned msg_id = 1; + int left; + int ret; + + struct { + struct qcom_rpm_header hdr; + struct qcom_rpm_request req; + u8 payload[count]; + } pkt; + + /* SMD packets to the RPM may not exceed 256 bytes */ + if (WARN_ON(sizeof(pkt) >= 256)) + return -EINVAL; + + mutex_lock(&rpm->lock); + + pkt.hdr.service_type = RPM_SERVICE_TYPE_REQUEST; + pkt.hdr.length = sizeof(struct qcom_rpm_request) + count; + + pkt.req.msg_id = msg_id++; + pkt.req.flags = BIT(state); + pkt.req.type = type; + pkt.req.id = id; + pkt.req.data_len = count; + memcpy(pkt.payload, buf, count); + + ret = qcom_smd_send(rpm->rpm_channel, &pkt, sizeof(pkt)); + if (ret) + goto out; + + left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT); + if (!left) + ret = -ETIMEDOUT; + else + ret = rpm->ack_status; + +out: + mutex_unlock(&rpm->lock); + return ret; +} +EXPORT_SYMBOL(qcom_rpm_smd_write); + +static int qcom_smd_rpm_callback(struct qcom_smd_device *qsdev, + const void *data, + size_t count) +{ + const struct qcom_rpm_header *hdr = data; + const struct qcom_rpm_message *msg; + struct qcom_smd_rpm *rpm = dev_get_drvdata(&qsdev->dev); + const u8 *buf = data + sizeof(struct qcom_rpm_header); + const u8 *end = buf + hdr->length; + char msgbuf[32]; + int status = 0; + u32 len; + + if (hdr->service_type != RPM_SERVICE_TYPE_REQUEST || + hdr->length < sizeof(struct qcom_rpm_message)) { + dev_err(&qsdev->dev, "invalid request\n"); + return 0; + } + + while (buf < end) { + msg = (struct qcom_rpm_message *)buf; + switch (msg->msg_type) { + case RPM_MSG_TYPE_MSG_ID: + break; + case RPM_MSG_TYPE_ERR: + len = min_t(u32, ALIGN(msg->length, 4), sizeof(msgbuf)); + memcpy_fromio(msgbuf, msg->message, len); + msgbuf[len - 1] = 0; + + if (!strcmp(msgbuf, "resource does not exist")) + status = -ENXIO; + else + status = -EINVAL; + break; + } + + buf = PTR_ALIGN(buf + 2 * sizeof(u32) + msg->length, 4); + } + + rpm->ack_status = status; + complete(&rpm->ack); + return 0; +} + +static int qcom_smd_rpm_probe(struct qcom_smd_device *sdev) +{ + struct qcom_smd_rpm *rpm; + + rpm = devm_kzalloc(&sdev->dev, sizeof(*rpm), GFP_KERNEL); + if (!rpm) + return -ENOMEM; + + mutex_init(&rpm->lock); + init_completion(&rpm->ack); + + rpm->rpm_channel = sdev->channel; + + dev_set_drvdata(&sdev->dev, rpm); + + return of_platform_populate(sdev->dev.of_node, NULL, NULL, &sdev->dev); +} + +static void qcom_smd_rpm_remove(struct qcom_smd_device *sdev) +{ + of_platform_depopulate(&sdev->dev); +} + +static const struct of_device_id qcom_smd_rpm_of_match[] = { + { .compatible = "qcom,rpm-msm8974" }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match); + +static struct qcom_smd_driver qcom_smd_rpm_driver = { + .probe = qcom_smd_rpm_probe, + .remove = qcom_smd_rpm_remove, + .callback = qcom_smd_rpm_callback, + .driver = { + .name = "qcom_smd_rpm", + .owner = THIS_MODULE, + .of_match_table = qcom_smd_rpm_of_match, + }, +}; + +static int __init qcom_smd_rpm_init(void) +{ + return qcom_smd_driver_register(&qcom_smd_rpm_driver); +} +arch_initcall(qcom_smd_rpm_init); + +static void __exit qcom_smd_rpm_exit(void) +{ + qcom_smd_driver_unregister(&qcom_smd_rpm_driver); +} +module_exit(qcom_smd_rpm_exit); + +MODULE_AUTHOR("Bjorn Andersson "); +MODULE_DESCRIPTION("Qualcomm SMD backed RPM driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3